Lampholders - Steven Engineering

SECTION
S
Lampholders
INDEX
Lampholders Index
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S2
Incandescent Lampholders
Outlet Box, Keyless and Pull Chain . . . . . . . .S3, S4
Metal Shell and Interiors . . . . . . . . . . . . . . . . . . .S5
Phenolic Cap and Shell . . . . . . . . . . . . . . . . . . . .S5
Multi-Lampholder Clusters . . . . . . . . . . . . . . . . .S6
Porcelain Par Connectors . . . . . . . . . . . . . . . . . .S6
Bayonet Socket–Single Contact . . . . . . . . . . . . . .S6
Porcelain Mogul Base . . . . . . . . . . . . . . . . . . . .S7
Socket Extensions . . . . . . . . . . . . . . . . . . . . . . . .S8
Appliance Heating Receptacle . . . . . . . . . . . . . .S8
Porcelain and Phenolic . . . . . . . . . . . . . . . . . . . .S8
Porcelain Snap-In . . . . . . . . . . . . . . . . . . . . . . . .S9
Porcelain Keyless–Commercial Units . . . . . . . . . .S9
Porcelain Keyless Fixture
Single Circuit-Medium Base . . . . . . . . . . . . . . . .S9
Porcelain Keyless Medium Base–
Side Angle Mounted . . . . . . . . . . . . . . . . . . . . .S10
Phenolic Keyless Fixture–Medium Base . . . . . .S10
Lampholders for Recessed Single
Contact Lamps . . . . . . . . . . . . . . . . . . . . . . . . .S10
Lampholders for Metal Halide and
Quartz Halogen Lamps . . . . . . . . . . . . . . . . . . .S10
Candle Sockets . . . . . . . . . . . . . . . . . . . .S10–S12
Fluorescent Lampholders
Compact Fluorescent Ceiling Lampholder . . . . . .S4
Linear Fluorescent . . . . . . . . . . . . . . . . . .S13–S17
Medium Bi-Pin . . . . . . . . . . . . . . . . . . .S13–S15
High Output . . . . . . . . . . . . . . . . . . . . .S13, S14
Slimline . . . . . . . . . . . . . . . . . . . . . . . . .S13, S14
Miniature . . . . . . . . . . . . . . . . . . . . . . . . . . .S16
T-8 to T-5 Adapter . . . . . . . . . . . . . . . . . . . . .S16
4-Pin Long Twin Tube with 2G11 Base . . . . . . .S17
Lamp Support Clips for Long Twin Tube . . . . . . .S18
Compact Fluorescent
Lampholders (CFL’s) . . . . . . . . . . . . . . . . .S19–S22
For a complete listing of OEM products, see the OEM-100 Catalog.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
LAMPHOLDERS
A VARIETY OF INCANDESCENT AND FLUORESCENT STYLES IN A RANGE OF RATINGS AND MATERIALS
Leviton offers a complete selection of outlet box, incandescent, fluorescent and specialty lampholders, in various ratings and
materials. The following pages offer a variety of types and styles.
OUTLET BOX LAMPHOLDER
Available in keyless, pull chain and
outlet models, all featuring easy
twist-lock mounting.
Cat. No. 8827-CW4 shown
PORCELAIN MEDIUM BASE
LAMPHOLDER
With a choice of mounting and
wiring options, these lampholders
are ideal for a wide range of
commercial and residential
incandescent fixtures.
Cat. No. 8101 shown
Lampholders
LONG TWIN-TUBE
2G11 BASE LAMPHOLDERS
Choice of mounting and wiring
options to reduce fixture
assembly time.
Cat. No. 13453 shown
FLUORESCENT LAMPHOLDER FOR
MEDIUM BI-PIN LAMPS
Features Lamp-Lock design for quick
relamping. Models dedicated for
energy-efficient T-8 lamps available.
CANDELABRA BASE LAMPHOLDER
Keyless lampholders for chandeliers
and other fixtures, featuring various
hickeys or double snap-in spring clips.
Cat. No. 13653-WP shown
Cat. No. 10014-800 shown
COMPACT FLUORESCENT
LAMPHOLDERS
Available for all popular 2-pin and
4-pin lamp bases, with a variety of
mounting options. Color-coded for
easy wattage identification.
S
Cat. No. 26725-426 shown
PORCELAIN MOGUL BASE
LAMPHOLDER
A complete selection of highquality porcelain moguls with
leads or screw terminals.
Pulse-rated models available.
Cat. No. 8756 shown
METAL SHELL LAMPHOLDER
Medium base, electrolier lampholders
available in a variety of attractive finishes.
Cat. No. 9346-PG shown
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
2Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 250V
Medium Base Incandescent Lampholders
Outlet Box Lampholders
Ø 4.56 (115.9)
DESCRIPTION/
TERMINALS
2 Terminal Screws
6" Pigtail Leads
4 Terminal Screws
WHITE UREA
CAT. NO.
8829-CW1
8829-CW2
8829-CW4
OD
FITS BOX SIZE
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
2.01 (50.9)
660 WATT 600V One-Piece Keyless Top Wired U R
660 WATT 250V One-Piece Pull Chain Top Wired U R
DESCRIPTION/
TERMINALS
2 Terminal Screws
6" Pigtail Leads
2 Terminal Screws
with Captive Clamps
WHITE UREA
CAT. NO.
8827-CW1
8827-CW2
8827-CW4
OD
FITS BOX SIZE
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
Ø 1.33 (33.9)
8827-CW2
660 WATT 250V One-Piece Keyless Top Wired U R
OD
FITS BOX SIZE
33⁄ 4"
41⁄ 2"
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
Ø 4.50 (114.3)
660 WATT 250V One-Piece Pull Chain Top Wired U R
PORCELAIN
CAT. NO.
29816-C
29816-C2
49816-C
OD
FITS BOX SIZE
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
Ø 1.63 (41.3)
9875-2
Ø 4.50 (115.3)
29816-CM*
2.01 (50.9)
DESCRIPTION/
TERMINALS
2 Screws
6" Pigtail Leads
2 Screws w/Captive Clamps
for 4-Wire Terminals
Interior Mechanism for
2-Piece Outlet Box Lampholders#
*When existing stock is depleted, this item will be DISCONTINUED.
CSA Certified except where indicated by#
Ø 1.74 (44.2)
Incandescent Lampholders
2 Screws, no cage lip
6" Pigtail Leads, no cage lip
4 Screws
4 Quickwire Push-In#
PORCELAIN
CAT. NO.
9874
9875
9875-2
49875
9883
1.52 (38.5)
DESCRIPTION/
TERMINALS
2 Screws#
29816-C
SPECIFICATIONS AND FEATURES
• Twist-lock mounting
• Pull chain models have bell at end of chain on
3 foot cord
• Medium base
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 125V — 15 AMP-125V • 120W 250V
Medium Base Incandescent and GU24 Base Fluorescent Lampholders
Ø 4.56 (115.9)
Outlet Box Lampholders
660 WATT 125V Lampholder Outlet 15 AMP-125V One-Piece Pull Chain Side Wired U
2.50 (63.5)
DESCRIPTION/
TERMINALS
2 Screws#
PORCELAIN
OD
FITS BOX SIZE
9716-C
41⁄ 2"
31⁄ 4" or 4"
NEMA CONFIG.
1-15R
W
660 WATT 125V Lampholder Outlet 15 AMP-125V One-Piece Pull Chain Top Wired U R
DESCRIPTION/
TERMINALS
2 Screws
PORCELAIN
OD
FITS BOX SIZE
9726-C
41⁄ 2"
31⁄ 4" or 4"
NEMA CONFIG.
G
5-15R
W
9716-C
DESCRIPTION
No. 6 Chain; 1⁄ 8" Dia. Balls
BRASS FINISH
18302-1
NICKEL FINISH
18302-1N
Connector for No. 6 Chain
9820
9820-N
Chain, 3 feet long, End Bell and
Connector; use as extension or
replacement; 1⁄ 25" Dia. Balls
6
6-N
Ø 4.56 (115.9)
18302-1N
2.50 (63.5)
Incandescent and Fluorescent Lampholders
Ball and Chain Accessories
9820
6
DESCRIPTION
Insulating Link; Thermoplastic
13⁄ 4" Total Length
BROWN
9839
WHITE
9839-I
9726-C
9839-I
CSA Certified except where indicated by#
GU24 Base Fluorescent Lampholder
Energy-Saving Keyless Bi-Pin Compact Fluorescent Ceiling Lampholder
for Closets and Closed Spaces 120 WATT 250V AC
DESCRIPTION
Lampholder with pigtail leads and knockout holes for multiple configurations
Lampholder with pigtail leads and knockout holes for multiple configurations;
with 13W Bulb
Lampholder with pigtail leads and knockout holes for multiple configurations;
with 13W Bulb and Lamp Guard
Lamp Guard
13W Replacement Lamp
CAT. NO.
9860
9860-B
9860-BL
9860-L
9865
Note: Not intended for use with incandescent lamps, dimmers or occupancy sensors.
SPECIFICATIONS AND FEATURES
9860
S
Outlet Box Incandescent Lampholders
• 2-Pole, 2-Wire Outlet; 2-Pole, 3-Wire Outlet
• Twist-lock mounting
• Pull chain models have bell at end of chain on
3 foot cord
Fluorescent Ceiling Lampholder*
• Installs indoors in closets, garages, basements,
utility rooms and attics
• Reduces risk of fire in closets and closed spaces
• Built of tough thermoplastic
• Use with a standard wall switch
• Pigtail leads provide easy installation
• Knockout holes on box enable multiple
configurations
* Patent pending
TESTING AND CODE COMPLIANCE
Outlet Box Incandescent Lampholders
• UL Listed (File #E-3810; E-7516)
• CSA Certified (File #LR-1863)
Fluorescent Ceiling Lampholder
• cULus Listed
• Meets NFPA 70, NEC Section 410.8B Requirements
and Canadian Electric Code Requirements for use
in closets with lamp guard
• Backed by a Limited Two-Year Warranty
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
4Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
250W 250V • 660W 250V
Medium Base Incandescent Lampholders
Metal Shell Lampholders
Ø1. 38( 38. 9)
RATING
250W 250V
10083-16
250W 250V
7070
250W 250V
7090
250W 250V
19980
660W 250V
7080
660W 250V
8004
660W 250V
9347
660W 250V
Ø1. 36( 34. 5)
9346
Interiors — Medium Base, Phenolic Body, Aluminum Screw Shell‡ U R
CAT. NO. INTERIOR
19980-M†
10083-M†
7070-M†
7090-M†
9346-M†
7080-M†
8004-M†
RATING
250W 250V
INTERIORS‡
7092-2M†
95110
660W 250V
7080-M†
95080
660W 250V
8004-M†
Ø 1.38 (34.9)
0.28 (7.1)
CAT. NO.
97092
7090
2.38 (60.3)
Brown Phenolic Cap and Shell Lampholders
Two-Piece, Medium Base Electrolier Interiors U R
Ø 1.36 (34.5)
1.06 (27.0)
LAMPHOLDER
19980
10083-16
7070
7090
9346
6098
8004
Incandescent Lampholders
2.38 (60.3)
0.28 (7.1)
1.06 (27.0)
Ø 1.38 (34.9)
Metal Shell Lampholders
DESCRIPTION
Pull Cord (nylon); 2-Circuit,
1⁄ 8 IPS Threaded Cap w/Set Screw
Push-Through; 1⁄ 8 IPS Threaded
Cap w/Set Screw
Keyless; 1⁄ 8 IPS Threaded
Cap w/Set Screw
0. 28( 71. 0)
CAT. NO.
9346
2. 38( 60. 3)
DESCRIPTION
Key—Electrolier; Single Circuit; 1⁄8 IPS Tapped
Bushing w/Set Screw
Removable Turn Knob—Electrolier; Single Circuit;
1⁄8 IPS Tapped Bushing w/Set Screw
Removable Turn Knob—Electrolier; 2-Circuit;
3 Terminal; 1⁄8 IPS Tapped Bushing less Set Screw
Removable Turn Knob—Electrolier; 2-Circuit;
1⁄8 IPS Tapped Bushing
Pull Chain—Electrolier; Single Circuit;
1⁄8 IPS Tapped Bushing w/Set Screws
Push Through—Electrolier; Single Circuit;
1⁄8 IPS Tapped Bushing w/Set Screw
Keyless—Electrolier; Single Circuit;
1⁄8 IPS Tapped Bushing w/Set Screw
Keyless—Short Electrolier; Single Circuit;
1⁄8 IPS Tapped Bushing w/Set Screw
1. 06( 27. 00)
Medium Base, Choice of Finishes* U R
†UL Recognized component.
NOM Certified except where indicated by‡.
Ø 1.36 (34.5)
7080
Ø 1.94 (49.3)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057), except interiors
2.68 (68.2)
*FINISH
A suffix must be added to each basic catalog number to indicate the finish desired. For Polished
Gilt/Brass finish, add -PG; for Unfinished Aluminum,
add -AL; for Polished Aluminum, add -NI (finishes on
aluminum). For bright dip/Brass, add -BR (finish on
brass). CONSULT LEVITON REPRESENTATIVE FOR
AVAILABILITY OF FINISHES.
2.41 (16.1)
SPECIFICATIONS AND FEATURES
• Phenolic interior with aluminum screwshell
• 2-Circuit lampholders operate dual-filament lamps
in sequence of Low-Medium-High-Off
• Cat. No. 7070 (2-Circuit, 3-Terminal) is wired in
series with keyless lampholder
1.20 (30.5)
Ø 0.75
(19.1)
Ø 1.53 (38.9)
95110
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V
Medium, Candelabra Base, Par Connectors—Incandescent Lampholders
Medium Base Multi-Lampholder Clusters
Treated Aluminum Screw Shell U R
DESCRIPTION
2-Light Twin 1⁄ 8 IPS
Male Top Bracket Only
2-Light Twin 1⁄ 8 IPS
Male (top & bottom)
2-Light Offset 1⁄ 8 IPS
Male (top & bottom)
3-Light 1⁄ 8 IPS Male
(top & bottom)‡
2-Light Offset 1⁄ 8 IPS
Male (top); Pullchain
Switch (bottom) with
1⁄ 2" usable shank#
4034-F5A
2-Light Twin 1⁄ 8 IPS
Male (top); Pullchain
Switch (bottom)
3⁄ 8" usable shank#
CAT. NO.
4020-A3A
RATING
660W 250V
T
15⁄ 16
5⁄ 16
TA
B
—
BA
—
OAH T+B
—
4015-D4F
660W 250V
111⁄ 16
5⁄ 16
111⁄ 16
7⁄ 16
33⁄ 8
4032-E5F
660W 250V
13⁄4
5⁄ 16
13⁄ 4
7⁄ 16
311⁄ 16
341-D4U
660W 250V
13⁄4
1⁄ 2
13⁄4
7⁄ 16
31⁄ 2
4034-F5A
660W 250V
1A 125V T
13⁄4
5⁄ 16
115⁄ 16
1⁄ 2
33⁄4+
4017-D2F
660W 250V
1A 125V T
11⁄ 16
5⁄ 16
111⁄ 16
3⁄ 8
213⁄ 16+
Incandescent Lampholders
+Includes nut.
Leads are No. 18 AWG 105°C plastic; 9" long, stripped 3⁄4"; untinned and pulled through top bracket.
Porcelain Par Connectors U R
DESCRIPTION
Medium Base for PAR #46 and #38 lamps. Leads
are No. 14 AWG 200°C SEW-2 Silicone Rubber Insulated;
18" Long, Stripped 3⁄4". Others available on inquiry‡
Mogul Base for PAR #56 and #64 lamps. Leads are
No. 14 150°C SEWF-2; 18" Long, Stripped 3⁄4".
Others available upon request
CAT. NO.
368-1
RATING
660W 125V
357-8
1000W 125V
CAT. NO.
905
RATING
Low Voltage
Bayonet Socket — Single Contact
Candelabra Base
341-D4U
DESCRIPTION
Flat Bracket. Leads are No. 18 AWG, 105°C Plastic;
6" Long, Stripped 3⁄4" (one black, one white)#‡
All devices are UL Listed except Cat. No. 905. Also CSA Certified except where indicated by#, and NOM Certified except
where indicated by‡.
T
B
1.69 (42.8)
1.81 (46.0)
TA
BA
0.31 (7.9)
0.38 (9.5)
B
T
1.75 (44.5)
1.75 (44.5)
BA
TA
0.44 (11.1)
0.31 (7.9)
BLACK
BLACK
WHITE
WHITE
4032-E5F
4017-D2F
4032-E5F
T
B
1.75 (44.5)
1.94 (49.2)
SPECIFICATIONS AND FEATURES
TA
BA
0.31 (7.9)
0.50 (12.7)
BLACK
• Pull chain models have bell at end of chain on
3 foot cord
• Medium and Candelabra bases
• Par connectors have white, unglazed porcelain
body
TESTING AND CODE COMPLIANCE
WHITE
• UL Listed (File #E-13405, E-3810)
• CSA Certified (File #LR-5863, LR-1863)
• NOM Certified (File #057)
4034-F5A
S
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
6Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
1500W 600V • 660W 1000V
Mogul Base Incandescent Lampholders
DESCRIPTION
Keyless, Single Circuit. For high pressure
sodium lamps up to 1000 watts.
8-32 Mounting Screws on 13⁄ 8" Centers
Keyless, Single Circuit. Positon-oriented.
For Super Metalarc HID lamps.
8-32 Mounting Screws on 13⁄ 8" Centers
Keyless, Single Circuit. For high-pressure
sodium lamps up to 400 watts.
8-32 Mounting Screws on 13⁄ 8" Centers
Low Pressure Sodium. For use with all
single-end bayonet base low pressure
sodium lamps#‡
Designed for Open-Fixture Shielded Metal
Halide Lamps. Complies with NFPA 70-2005
for Open-Rated Fixtures. 8-32 Mounting
Screws on 13⁄ 8" Centers
CAT. NO.
8746
RATING
1500W 600V
5KV Pulse-rated
OD
21⁄ 8
OH
31⁄ 64
8750
1500W 600V
25⁄ 32
239⁄ 64
8756
1500W 600V
4KV Pulse-rated
25⁄ 32
239⁄ 64
8806
660W 1000V
13⁄ 8
15⁄ 8
3.02 (76.6)
Porcelain Mogul Base Lampholders
With Leads* U R
Ø 2.13 (54.0)
8746
8751
1500W 600V,
25⁄ 32
4KV Pulse Rated
239⁄ 64
*Leads types, lengths and ratings vary with the end use applications. Standard leads as well as variations
available on inquiry.
CAT. NO.
8765
8694
RATING
1500W 600V
1500W 600V
OD
25⁄16
25⁄ 32
OH
223⁄ 64
239⁄ 64
Incandescent Lampholders
DESCRIPTION
Keyless; 2-Piece; Single-Pole#
Keyless;. Single Circuit with 8-32
Lock Nuts on 13⁄ 8" Centers.
Die-cast caps available upon request
2.61 (66.3)
Screw Terminals U R
Ø 2.16 (54.8)
CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
2.61 (66.3)
8750
Ø 2.16 (54.8)
8694
1.75 (44.5)
1.63 (41.3)
SPECIFICATIONS AND FEATURES
• Cat. No. 8746 – Porcelain body gray glazed with
ceramic arc shield; Cat. No. 8750 – Porcelain
body yellow glazed; Cat. No. 8751 – Porcelain
body pink glazed
• All other moguls listed have white glazed
porcelain body
• Copper-alloy nickel-plated screw shell
0.56
(14.3)
1.38 (34.9)
TESTING AND CODE COMPLIANCE
•
•
•
•
1.63
(41.3)
2.25 (57.2)
8806
UL Listed (File #E-13402)
CSA Certified (File #LR-1863)
NOM Certified (File #057)
Cat. No. 8751 complies with NFPA 70-2005
requirements for open-rated fixtures
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V • 1500W 600V
Medium, Mogul and Candelabra Base Incandescent Lampholders
Socket Extensions — Single Circuit
Medium–Medium U R
1.00 (25.4)
2.19 (55.5)
DESCRIPTION
2-Piece Porcelain; Mounting Hole 13⁄8" Dia.
Extension 11⁄4"*
1-Piece Porcelain; Slotted Mounting Hole 13⁄8" Dia.
Extension 11⁄4"*
1-Piece Phenolic. Extension 13⁄16"**
CAT. NO.
2004
RATING
660W 250V
2005
660W 250V
2006
660W 250V
CAT. NO.
8647
RATING
1500W 600V
CAT. NO.
8681
8681-400
RATING
660W 250V
660W 250V
4 KV PulseRated
CAT. NO.
8110
RATING
660W 250V
*To be used with porcelain sockets only
**To be used with phenolic sockets only
Mogul–Mogul U R
Ø 1.63 (41.3)
DESCRIPTION
1-Piece Porcelain. Extension 23⁄8"‡
2005
Socket Adapter
1.69 (42.9)
1.94 (49.3)
DESCRIPTION
1-piece. Meets Fed. Spec. W-L-142a‡
Same as above, except 4 KV Pulse-Rated‡
Appliance Heating Receptacle
Porcelain Two-Piece U R
DESCRIPTION
2-piece Heating Receptacle. Gasket Furnished‡
19062
Porcelain and Phenolic Lampholders
Pony Cleat Type U R
Ø 2.19 (55.6)
DESCRIPTION
Candelabra Base; Plastic.
Not UL Listed#‡
Miniature Base, Plastic.
Not UL Listed#‡
Medium Base, Phenolic
Medium Base, Porcelain
0.77 (19.4)
1.94
(49.3)
1.53 (38.9)
Incandescent Lampholders
Mogul-To-Porcelain Medium U R
CAT. NO.
10028
RATING
75W 125V
OD
17⁄ 16
OH
7⁄ 8
C
11⁄ 8
10020
75W 125V
15⁄ 16
7⁄ 8
31⁄ 32
9063
19062
660W 250V
660W 250V
17⁄ 8
17⁄ 8
11⁄ 2
11⁄ 2
115⁄ 16
115⁄ 16
CAT. NO.
9880
RATING
660W 250V
OD
2 5⁄16
OH
11⁄ 2
C
13⁄ 8
9882
660W 250V
2 5⁄16
17⁄ 8
13⁄ 8
Surface Type U R
Ø 2.31 (58.7)
9880
DESCRIPTION
Medium Base; Porcelain;
Low 2-Piece
Medium Base; Porcelain;
High 2-Piece#‡
CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
SPECIFICATIONS AND FEATURES
• Medium-to-Medium Extenders available in
phenolic and porcelain
• Pony Cleat Receptacles have open wiring terminals
• Two-piece surface-type lampholders have concealed wiring terminals with wireways for top and
continuous wiring
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810; E-13396)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
S
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
8Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V • 250W 250V
Medium Base Incandescent Lampholders
Porcelain Snap-In Lampholders — Medium Base
Screw Terminals U R
CAT. NO.
8880
RATING
660W 250V
OD
111⁄ 16
OH
11⁄ 2
8875
660W 250V
111⁄ 16
111⁄ 16
1.64 (41.6)
DESCRIPTION
1-Piece, Front Mounted. 1⁄4" Shoulder.
Panel Thickness: .025 –.062"
1-Piece, Front Mounted. Shallow Back.
Panel Thickness: .030 –.062"
Ø 1.36 (34.5)
Porcelain Keyless Lampholders Commercial Units — Medium Base
Single Circuit Screw Terminals U R
CAT. NO.
10045
10065
RATING
660W 250V
660W 250V
OD
11⁄ 2
Body 11⁄ 2
OH
21⁄ 8
21⁄ 8
20070
660W 250V
Bead
21⁄4 ringnut —
10085
660W 250V
11⁄ 2
111⁄ 16
Ø 1.69 (42.9)
8880
15⁄ 8
Fixture Pan Lampholder with
1⁄ 8" IPS Hickey
RATING
660W 600V
OD
15⁄ 8
OH
17⁄ 16
9350
8871
3152-8
660W 250V
660W 250V
660W 250V
13⁄ 4
111⁄ 16
13⁄8
13⁄ 8
19⁄ 16
17⁄ 16
CAT. NO.
8101
RATING
660W 250V
OD
13⁄ 4
OH
13⁄ 8
18315
660W 250V
—
—
8052-1
70052-100
660W 250V
13⁄ 8
660W 600V,
145⁄ 64
4KV Pulse Rated
17⁄ 16
29⁄ 32
CAT. NO.
9814
RATING
250W 250V
OH
113⁄ 16
1.69 (42.9)
CAT. NO.
9885
Incandescent Lampholders
Porcelain Keyless Fixture Single Circuit — Medium Base
Screw Terminals U R
DESCRIPTION
1-Piece, Front Mounted for Fixture or
Sign Use. Tapped 8-32 Bushings,
Mounting Centers 113⁄ 16".
2-Piece, Ring Type
1-Piece with Removable Strap#
Ø 0.84 (21.4)
0.16 (4.0)
DESCRIPTION
Straight Body with Cap. Screw Terminals.
Beaded Body for 11⁄ 2" Clamp Style
Shadeholder with Cap.
Screw Terminals.
Adjustable Glass Retaining Ring with
Cap and Ring Nut. Screw Terminals.
Straight Body with Leads. No. 18 AWG
105°C Plastic; 9" Long, Stripped 3⁄4"
with Two 6/32 Mounting Screws
Ø 1.50 (38.1)
10085
Two-Piece Pull Chain U
DESCRIPTION
Ring Type; Screw Terminals;
Gasket Furnished#‡
OD
113⁄ 16
1.88 (47.8)
DESCRIPTION
2-Piece Ring Type with Leads: No. 18 AWG,
105°C Plastic; 9" Long, Stripped 3⁄4"
Angle Pan with Leads: No. 18 AWG Type AF
150°C Plastic; 9" Long, Stripped 3⁄4"
Removable Bracket with Leads
Screw-Mount Pulse-Rated Lampholder with
Leads for Open-Fixture Lamps; 18 AWG 200ºC
600V SEW-2 (SF-2) wire; 9" Long, Stripped 1⁄2"
1.52 (38.5)
Leads U R
Ø 1.38 (34.9)
CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
3152
Ø 1.75 (44.4)
SPECIFICATIONS AND FEATURES
1.47 (37.3)
• Suitable for a wide variety of fixtures, signs and
displays
• Unglazed base and ring on two-piece
lampholders
• Gasket supplied with two-piece ring type rated at
90°C dry maximum
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
8101
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
9
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 250V • 250W 250V • 3000W 600V
Medium Base, Metal Halide and Quartz Halogen Incandescent Lampholders
Phenolic Keyless Fixture — Medium Base
Screw Terminals U R
1.44 (36.5)
2.22 (56.4)
DESCRIPTION
Permanent Bracket. Terminal Screws
Backed Out and Staked
Same as 3352-1, with Shorter Bracket
Removable Hickey. Terminal Screws Backed
Out and Staked
CAT. NO.
3352-1
RATING
660W 250V
3352-F
3352-8
660W 250V
660W 250V
Hickeys and brackets are available in various types and sizes. Consult a Leviton representative for more information.
Porcelain Keyless, Side-Mounted — Medium Base
Screw Terminals U R
Ø 1.25 (31.7)
DESCRIPTION
Single Lampholder w/Side Outlet Bushing—1⁄8 IPS
Twin Lampholder w/Bushed Flange—1⁄8 IPS
Twin Lampholder w/Single Outlet Bushing—1⁄8 IPS
Same as 4005 with 3⁄8 IPS Bushing
3352-1
CAT. NO.
10091
4010
4005
4006
RATING
660W 250V
660W 250V
660W 250V
660W 250V
Ø 1.50 (38.1)
3.00
(76.2)
Candle Sockets, Bottom Turn Knob — Medium Base
Screw Terminals U
DESCRIPTION
Three-light, two-piece phenolic husk.
Lighting sequence: LO-MED-HI-OFF#
4005
Ø 0.82
(20.9)
1.22 (30.9)
Ø 0.64 (16.3)
CAT. NO.
4063
RATING
250W 250V
Lampholders for Recessed Single Contact Lamps U R
0.08 (2.0)
1.56 (39.7)
Incandescent Lampholders
All bushings are tapped and have set screw
DESCRIPTION
Front Flange Mount. Standard Leads are No. 18 AWG,
Type SEW-2, 200°C, 18" Long, Stripped 3⁄4"‡
Rear Flange Mount. Same Leads and Specs as No. 554‡
CAT. NO.
554
RATING
3000W 600V
555
3000W 600V
Lampholders for Metal Halide and Quartz Halogen Lamps U R
0.94
(23.9)
554
0.64
(16.3)
DESCRIPTION
Single-Ended Metal Halide for Lamps with a G8.5 Base. Lead-In Edge
on Body Ensures Proper Lamping. Standard Leads (2) are Black
No. 18 AWG, Type SEW-2, 200ºC 600V Wire, 9" Long, Stripped .325"‡
Single-Ended Metal Halide for Lamps with a GX8.5 Base, such as Philips
CDM-R11, rated up to 150W. Standard Leads (2) are Black No. 18 AWG,
SEW-2, 200ºC 600V Wire, 12" Long, Stripped 1⁄2"‡
Twist-In Single-Ended Quartz Halogen for Lamps with a GU10 Base,
rated up to 150W. Fully Dimmable; Standard Leads (2) are White,
No. 20 AWG Teflon® wire, rated 250ºC 600V, 6" Long, Stripped 1⁄2"‡
CAT. NO.
560
RATING
660W 600V,
5KV Pulse Rated
565
660W 600V,
5KV Pulse Rated
570
660W 600V
Ø 0.96 (24.5)
CSA Certified except where indicated by #, and NOM Certified except where indicated by‡.
SPECIFICATIONS AND FEATURES
1.16
(29.5)
560
• Cat. No. 3352 lampholder bodies have wireways
• Side-Mounted lampholders are white glazed
porcelain with copper-alloy screwshell
• Recessed Single-Contact lampholders have
porcelain body with nickel-plated steel housing
• Cat. No. 560 has a metal lamp-positioning clip
(patent pending) that maintains lamp seating
position
• Cat. No. 565 is designed for energy-efficient
CDM lamps
• Cat. No. 570 twists in and is fully dimmable
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810) Cat. Nos. 560, 565 and
570: cULus (File #E-13405)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
S
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
10
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V • 250W 250V • 75W 125V
Candelabra and Medium Base Incandescent Lampholders
Ø 1.27 (32.1)
CAT. NO.
4155
RATING
660W 250V
4158
660W 250V
CAT. NO.
8684
9800
RATING
660W 250V
660W 250
Candle Sockets, Keyless* — Medium Base
Fiber-Disc Body, Screw Terminals U R
DESCRIPTION
Solid Hickey, 2" Overall Height‡
Adjustable Hickey. Overall Height: 4–53⁄4"
0.46
(11.6)
3.13 (79.5)
DESCRIPTION
1-Piece Phenolic Body; 2 Leg Bracket; Single Light;
Removable Interior; Knurl Nut and Lock Nut
2-Piece Phenolic Husk & Removable Interior Husk;
Single Light; Knurl Nut
1.75 (44.5)
Candle Sockets, Bottom Turn Knob — Medium Base
Screw Terminals U R
4155
Candle Sockets, Phenolic — Medium Base
With Removable Turn Knob, Screw Terminals U R
CAT. NO.
9805*
RATING
250W 250V
9805-A*
250W 250V
NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of
13/16" dia. flat at bottom of candle for clearance.
Candelabra Base, Keyless* U R‡
DESCRIPTION
Screw Terminals; Solid Hickey. Overall Height: 2"
Screw Terminals; Solid Hickey. Overall Height: 11⁄2"
Screw Terminals; Adjustable Hickey: 31⁄4–43⁄4"
Double Snap-In Spring Clips. Height of socket from
panel is 1". Leads are No. 18 AWG 105°C plastic,
24" long, stripped 1⁄2"
Ø 1.16 (29.4)
CAT. NO.
10025
10027
10026
10014-800
RATING
75W 125V
75W 125V
75W 125V
75W 125V
9805
Ø 0.78 (19.8)
2.09 (53.1)
*7/8" candle tube. All hickeys tapped 1/8 IPS.
NOM Certified except where indicated by‡
Incandescent Lampholders
DESCRIPTION
Removable Knob (Short Type), Adjustable Hickey.
Overall Height: 4–51⁄2"
Removable Knob, Removable 1-Leg Hickey.
Overall Height: 27⁄16"
1.03 (26.2)
*Insulating paper liner pushes down against hickey projections.
NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of
13/16" dia. flat bottom of candle cup for clearance.
10025
SPECIFICATIONS AND FEATURES
0.77 (19.4)
Across Flats
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810; E-13400)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
1.22 (31.0)
• Candle sockets for single-light applications
• Fiber Disc Body for use with standard
candle tubes
• Spring-tempered steel clip holds Cat. No.
10014-800 socket rigidly in place
10014-800
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
11
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 125V • 660W 250V
Candelabra and Medium Base Incandescent Lampholders
Ø 0.78 (19.8)
Candle Sockets — Porcelain
Candelabra Base Screw Terminals U
DESCRIPTION
Solid Hickey.* Overall Height: 23⁄ 32"#‡
CAT. NO.
20025
RATING
75W 125V
2.09 (53.1)
*Other hickey sizes available
Keyless Heavy Duty Phenolic Single Circuit Lampholders
Two-Piece Pin Type U R
20025
DESCRIPTION
Candelabra Base, Detachable Zinc-Plated Wire Hook.
Accepts No. 20 – No. 18 Stranded Insulated Wire
Medium Base, Detachable Zinc-Plated Wire Hook.
Accepts No. 14 – No. 12 Stranded Insulated Wire
CAT. NO.
267**
RATING
75W 125V
167**
660W 250V
CAT. NO.
55**
RATING
660W 250V
157**
660W 250V
157-X**
124-D
660W 250V
660W 250V
Note: Linings assembled.
**For temporary lighting — not waterproof.
1.25 (31.8)
DESCRIPTION
Vinyl, Phenolic Interior & Screw Shell, Brass Shell
Contact. Leads are No. 14 AWG, 6" Long, Stripped 3⁄4",
Molded into Boots‡
Phenolic with Brass Screw Shell. Leads Soldered
and Hot Waxed in Deep Well are No. 14 AWG 6" Long
Same as 157 above, with Left-Hand Screw Shell
Rubber, Aluminum Screwshell. Leads are
No. 16 AWG, 6" Long, Soldered to Terminals
and Sealed in Rubber Boot#
Ø 0.75 (19.0)
267
**For temporary lighting—not waterproof.
All devices are UL Listed except Cat.No. 124-D. Also CSA Certified except where indicated by #, and NOM Certified
except where indicated by‡
Note: The listed products may be used at construction sites provided that bulb cages are used and suitable splices are
made. The listing for the products meets the OSHA requirement and is made for open wiring without a separate outlet box.
1.88 (47.8)
Incandescent Lampholders
Pigtail Type Medium Base with Leads U R
Ø 1.5 (38.1)
167
SPECIFICATIONS AND FEATURES
Ø 1.64 (41.7)
• Candle socket has white unglazed porcelain body
with aluminum screw shell
• Choice of Pin-Type or Pigtail Type for temporary
lighting applications
• Two-Piece Pin Type automatically pierces
wire leads
2.12 (54.0)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-13400) 267**
• UL Listed (File #E-3810) 55**, 157**, 157-X**
and 167**
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
55
S
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
12
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 1000V • 660W 250V
Medium, High Output and Slimline—Linear Fluorescent Lampholders
RATING
13550
13551
660W 600V
13556
13557
660W 600V
CAT. NO.
PLUNGER
452
—
466
—
2536
—
CAT. NO.
FIXED
—
453
—
467
—
2537
RATING
CAT. NO.
WHITE
431-W
RATING
660W 600V
390-1W
660W 600V
660W 600V
660W 600V
For Slimline, Single Pin Lamps U R
Butt-On Surface Mounting,
12" Leads‡
Pedestal Base, Slide-On
Shallow Base, Slide-On or Lock-On
Mounting, Quickwire Terminals*
13464
1.31 (33.3)
391-1W
660W 600V
CAT. NO.
380
396
RATING
660W 250V
660W 250V
1.28
(32.5)
2536
Starter Bases
0.17 (4.3)
NOM Certified except where indicated by‡
*Suitable for outdoor applications when properly enclosed
1.75 (44.5)
DESCRIPTION
Starter Base; Screw Terminals, Black‡
Starter Base; with Leads, Black‡
1.17 (29.7)
For Medium Bi-Pin Lamps U R
1.31 (33.3)
1.12
(28.5)
Fluorescent Lampholders
Thin Body, Quickwire Terminals
Accommodate Rapid-Start Circuits
Pedestal type, Straight-in Wiring
Through Wireways or Screw Terminals‡
Same as above, with Starter Base‡
1.44 (36.5)
660W 1000V
660W 600V
660W 1000V
660W 600V
660W 1000V
660W 600V
For Medium Bi-Pin Lamps U R
DESCRIPTION
1.66
(42.1)
1.84 (46.7)
DESCRIPTION
2.30 (58.3)
CAT. NO.
FIXED
13465
23465
1.14 (29.0)
Screw Mount, Push-in wiring.*
Same as 13464/13465 except with Internal
Shunt Connection for Electronic Ballasts*
Slide-on, Shallow Base,
Quickwire Terminals*
Slide-on, Shallow Base for Power Groove
and Jacketed Lamps, Quickwire Terminals*
CAT. NO.
PLUNGER
13464
23464
1.17 (29.7)
DESCRIPTION
1.74 (44.2)
For High Output Lamps — Recessed Double Contact, Pedestal Type U R
2537
0.97 (24.6)
0.47
(11.9)
SPECIFICATIONS AND FEATURES
• Silver-plated copper alloy contacts
• Quickwire terminals accept No. 18 AWG twisted
and tinned, solder-dipped or solid leads
• Lampholders are white, starter bases are black
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-5833)
• CSA Certified (File #LR-1863; LR-5863;
LR-2200)
• NOM Certified (#057)
1.25
(31.8)
1.06 (27.0)
396
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
13
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 1000V • 75W 250V
Medium and Miniature Bi-Pin Lamps—Linear Fluorescent Lampholders
For Medium and Miniature Bi-Pin Lamps — Surface Mount with Leads* U R
1.25 (31.8)
0.97 (24.6)
Rapid-Start Medium Bi-Pin, 9" leads
Rapid-Start Medium Bi-Pin, Disconnect
(paired with Cat. No. 395-W), 9" leads
Miniature Bi-Pin for T5 Lamp, 6" leads
0.53 (13.5)
1.22 (31.0)
DESCRIPTION
RATING
660W 600V
660W 600V
420-W
75W 250V
*Leads are No. 18 AWG, 105°C plastic insulated wire
For Slimline, Medium Bi-Pin, High Output Lamps — Snap-In with Quickwire U R
0.44
(11.1)
DESCRIPTION
Slimline‡
395-W
Medium Bi-Pin, Stainless Steel
Coverplate & Clip
Medium Bi-Pin, Same as above,
with Internal Shunt for Use with
Electronic Ballasts
High Output 800mA and 1500mA ‡
1.28 (33.5)
0.66 (16.7)
0.75 (19.1)
Fluorescent Lampholders
CAT. NO.
WHITE
395-W
389-W
CAT. NO.
PLUNGER
516
—
13518
—
23518
—
CAT. NO.
FIXED
—
517
—
13519
—
23519
RATING
523
—
—
524
660W 600V
660W 600V
660W 1000V
660W 600V
660W 600V
660W 600V
660W 600V
660W 600V
NOM Certified except where indicated by‡
0.48
(12.3)
0.64
(16.3)
420-W
Ø1.6
0.55
(14.0)
4 (41
.7)
47.75 (1212.9) FOR 48" LAMPS
13518
PLUNGER STYLE
13518 — see diagram right
13519
STATIONARY STYLE
Medium Bi-Pin Spacing
45°
0.
(4 188
.7
6)
SPECIFICATIONS AND FEATURES
R 0.813 (20.64)
KEY for
13518/13519
)
.50
38
(
.52
1
PANEL OPENING FOR 13518/13519
• Versatile snap-in mounting reduces fixture
assembly time
• Quickwire terminals accept either No. 18 AWG
(stranded, twisted or tinned), No. 18 AWG solid or
No. 16 AWG solid.
• Internal Shunt versions stamped “S” on back for
easy identification
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-5833)
• CSA Certified (File #LR-5863; LR-1863)
• NOM Certified (#057)
PANEL THICKNESS 0.035-0.050 (0.89-1.27)
S
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
14
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V
Medium Bi-Pin Lamps—Linear Fluorescent Lampholders
CAT. NO.
13353-N
13357-N
13359-N
RATING
660W 600V
660W 600V
660W 600V
13351-D
13354-D
23351
660W 600V
660W 600V
660W 600V
0.38
(4.5)
DESCRIPTION
Low Profile, Slide-On, with Captive Nut
Tall Profile, Slide-On, with Captive Nut
Tall Profile without Side Grooves,
Slide-On, with Captive Nut
Low Profile Disconnect, Slide-On
Tall Profile Disconnect, Slide-On
Low-Profile; Shunted, Slide-On
1.68 (42.6)
For Medium Bi-Pin Lamps — Turn-Type U R
0.34
(8.6)
1.25 (31.8)
For Medium Bi-Pin Lamps — Straight-In U R
For Medium Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-Lock U R
CAT. NO.
13653-WP
RATING
660W 600V
13653-NP
23653-WP
660W 600V
660W 600V
23653-NP
13652-WP
660W 600V
660W 600V
23652-WP
660W 600V
13652-WWP
600W 600V
13652-WNP
23652-WWP
600W 600V
600W 600V
23652-WNP
13653-WWP
600W 600V
600W 600V
13653-WNP
23653-WWP
600W 600V
600W 600V
23653-WNP
600W 600V
0.34
(8.6)
1.25 (31.8)
0.72
(18.3)
13357-N
0.22 (5.9)
1.35 (34.2)
0.98 (24.9)
0.67
(17.0)
Fluorescent Lampholders
DESCRIPTION
Snap-In or Slide-On Mounting Featuring Lamp-Lock,
with Panel Locator Post. For T-8 and T-12 Lamps
Same as Above, Less Locator Post
Same as 13653-WP, Except with Internal Shunt
Connection for Electronic Ballasts
Same as Above, Less Locator Post
Snap-In or Slide-On Mounting Featuring Lamp-Lock,
Optional Panel Locator Post. Dedicated for
Energy-Efficient T-8 Lamps Only
Same as 13652, Except with Internal Shunt
Connection for Electronic Ballasts
Snap-In or Slide-On Mounting Featuring Lamp-Lock,
for Energy-Efficient T-8 Lamps Only. Wide-Wing Design
Same as Above, Less Locator Post
Same as 13652-WWP, Except with Internal Shunt Connection
for Electronic Ballasts
Same as Above, Less Locator Post
Snap-In or Slide-On Mounting Featuring Lamp-Lock,
for T-8 and T-12 Lamps. Wide-Wing Design
Same as Above, Less Locator Post
Same as 13653-WWP, Except with Internal Shunt Connection
for Electronic Ballasts
Same as Above, Less Locator Post
13351-D
RATING
660W 600V
660W 600V
2.04 (51.8)
CAT. NO.
13150-UR5
13451-N
0.38
(9.7)
DESCRIPTION
Low Profile, Slide-On
Self-Locking; Slide-In, with Captive Nut.
For use with T-8 Lamps
0.72
(18.2)
13653-WP
NOTE: Also available with bottom push-in wiring. Contact your Leviton representative for further details.
0.18 (4.50)
0.31
(7.90)
1.02 (25.8)
Recommended
Panel Thickness
0.02-0.03
(0.53-0.79)
1.00 (25.50)
Recommended Panel Opening for all -WP, -NP
Medium Bi-Pin Snap-In/Slide-On Lampholders
Recommended Panel Opening for Medium
Bi-Pin Turn-Type Lampholders
This is only a recommendation —
lampholder will function over a wider range
Ø 0.18 (4.50)
0.38
0.31
(9.53) (7.90)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-5833)
• CSA Certified (File #LR-1863;
LR-5863; LR-2200)
• NOM Certified (#057)
• Medium Bi-Pin lamps with SnapIn/Slide-On Design and Lamp-Lock
are VDE Certified to IEC
0.38
(9.53)
SPECIFICATIONS AND FEATURES
Lamp-Lock
• Four-position lamp-lock socket
rotates 90°, forward and back, for
quick relamping
• Lamp-Lock models have slim, low
profile silhouette that fits 22 to 25
gauge panels
• Chemical-resistant white thermoplastic body
Recommended Panel
Thickness
0-021-0.031 (0.53-0.79)
1.031 (26.20)
Recommended Panel Opening for all -WWP,
-WNP wide-wing models
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
15
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
120W 600V • 660W 600V
Medium and Miniature Bi-Pin Lamps—Linear Fluorescent Lampholders
For Medium Bi-Pin Lamps — Slide-On Design and Lamp-LockU R
0.75 (19.1)
0.37
(9.4)
1.11 (28.2)
DESCRIPTION
Medium Profile 0.91 (23.0) Lamp Center. Slide-On Mounting
Featuring Lamp Lock. For T-8 and T-12 Lamps
Same as 13661, Except with Internal Shunt Connection
for Electronic Ballasts
Tall Profile 1.18 (30.0) Lamp Center. Slide-On Mounting
Featuring Lamp Lock. For T-8 and T-12 Lamps
Same as 13660, Except with Internal Shunt Connection
for Electronic Ballasts
RATING
660W-600V
23661
660W-600V
13660
660W-600V
23660
660W-600V
For Miniature Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-Lock U R
0.34
(8.6)
1.43 (36.3)
13654-SNP
1.39
(35.3)
1.19 (30.2)
13654-EXL
DESCRIPTION
Low Profile 0.62 (15.7) Lamp Center, Snap-In or Slide-On
Mounting Featuring Lamp-Lock, with Panel Locator Post.
For T-5 Lamps
Same as Above, Less Locator Post
Tall Profile 0.98 (24.9) Lamp Center, Snap-In or Slide-On
Mounting Featuring Lamp-Lock, with Panel Locator Post.
For T-5 Lamps
Same as Above, Less Locator Post
Low Profile 0.62 (15.7) Lamp Center, Snap-In or Slide-On
Mounting Featuring Lamp-Lock, with Panel Locator Post.
For T-5 Lamps. Internal Shunt Connection for Electronic Ballasts
Same as Above, Less Locator Post
Tall Profile 0.98 (24.9) Lamp Center, Snap-In or Slide-On
Mounting Featuring Lamp-Lock, with Panel Locator Post.
For T-5 Lamps. Internal Shunt Connection for Electronic Ballasts.
Same as above, Less Locator Post
CAT. NO.
13654-SWP
RATING
120W 600V
13654-SNP
13654-TWP
120W 600V
120W 600V
13654-TNP
23654-SWP
120W 600V
120W 600V
23654-SNP
23654-TWP
120W 600V
120W 600V
23654-TNP
120W 600V
13654-EXL
120W 600V
13654-EXS
120W-600V
T-8 to T-5 Adapter U R
1.43 (36.3)
Long T-8 to T-5 Adapter, converts existing T-8 fixtures to accept
energy-efficient T-5 lamps; with Lamp Lock.
Specify lamp length for proper ordering
Short T-8 to T-5 Adapter, converts existing T-8 fixtures to
accept energy-efficient T-5 lamps; with Lamp-Lock.
Specify lamp length for proper ordering
0.34
(8.6)
1.19
(30.2)
1.19 (30.2)
13654-EXS
0.79 (20.0)
0.39
(1O.0)
0.39 (10.0)
0.350 (8.89)
0.38
(9.7)
0.14
)
(3.71
0.28
(17.14)
Fluorescent Lampholders
CAT. NO.
13661
SPECIFICATIONS AND FEATURES
PANEL CUTOUT
20–23 GAUGE PANELS
Recommended Panel Opening for Miniature
Bi-Pin Snap-In/Slide-On Lampholders
0.375
(9.53)
1.031
(26.18)
Recommended Panel Opening for Medium
Bi-Pin Slide-On Lampholders
1.02 (25.9)
Recommended Panel Opening
for T-8 to T-5 Adapter
Lamp-Lock
• Four-position lamp-lock socket rotates 90°,
forward and back, for quick relamping
• Lamp-Lock models have slim, low profile silhouette that fits 22 to 25 gauge panels
• Chemical-resistant white thermoplastic body
T-8 to T-5 Adapter
• Cost-effective solution to incorporate miniature
bi-pin T-5 lamps into existing T-8 configurations
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-5833)
• CSA Certified (File #LR-1863; LR-5863;
LR-2200)
• NOM Certified (#057)
• Medium Bi-Pin Lamps with Slide-On Design and
Lamp-Lock are VDE Certified to IEC
S
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
16
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V
Long Twin Tube with 2G11 Base—Compact Fluorescent Lampholders
4-Pin Long Twin-Tube with 2G11 Base — Slide-In Mounting U R
DESCRIPTION
Slide-In for 18-20 Ga. Panels, Quickwire Terminals
CAT. NO.
13452
RATING
660W 600V
4-Pin Long Twin-Tube with 2G11 Base — Bottom or Back Mounting U R
DESCRIPTION
Vertical Snap-In Mounting, Side Push-In Wiring
Same as above, with Internal Shunt Connection for Electronic Ballasts
Horizontal Snap-In Mounting, Bottom Push-In Wiring
Same as above, with Internal Shunt Connection for Electronic Ballasts
Horizontal Screw-Mount. Bottom Push-In Wiring
Same as above, with Internal Shunt Connection for Electronic Ballasts
CAT. NO.
13453
23453
13454
23454
13455
23455
RATING
660W 600V
660W 600V
660W 600V
660W 600V
660W 600V
660W 600V
13453
Note: See page S18 for Lamp Support Clips
0.86 (21.8)
0.69
(17.5)
0.86 (21.8)
0.69
(17.5)
0.39
(9.9)
0.39
(9.9)
13453 and 23453
0.52
(13.2)
0.524
(13.31)
0.023-0.040
(0.58-1.02)
0.023-0.040
(0.58-1.02)
1.94 (49.3)
1.00 (25.4)
0.95 (24.1)
0.15
(3.8)
0.30 (7.6)
1.32 (33.5)
0.52
(13.2)
13453
PANEL-THICKNESS
.023-.039 (0.58–0.99)
MAX., INCLUDING PAINT
23453
1.000 (25.4)
Recommended Panel Opening for
13453, 23453, 13454 and 23454
0.26 (6.6)
0.30 (7.6)
1.90 (48.3)
0.95 (24.1)
0.52
(13.2)
13454 and 23454
0.023-0.040
(0.58-1.02)
Ø 0.146 (3.71)
13454
Fluorescent Lampholders
13454
23454
SPECIFICATIONS AND FEATURES
0.80 (20.3)
0.20
(5.1)
0.94 (23.9)
0.30 (7.6)
0.96 (24.4)
0.95 (24.1)
Ø 0.146 (3.71)
• UL Listed (File #E-5833)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
0.83 (21.1)
TESTING AND CODE COMPLIANCE
1.87 (47.5)
1.35 (34.3)
• Vertical Snap-In model allows wires to be
routed on either top or bottom of panel
• Two wiring ports per contact speed
harness wiring
• Internal Shunt models eliminate need for
extra jumper wire in fixtures designed for
electronic ballasts
• Low-profile design for smaller, more
compact fixtures
• Superior metal-spring lamp retainer clips
R0.078 (1.98)
1.35 (34.3)
Ø 0.174 (4.42)
13455 and 23455
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
LAMP SUPPORT CLIPS
Lamp Support Clips for Long Twin Tube 2G11 Base Fluorescent Lampholders
Plastic and Stainless Steel Lamp Support Clips
DESCRIPTION
Plastic Lamp Support Clip, Slide-On
Plastic Lamp Support Clip, Screw Mount
Horizontal Snap-In Lamp Support Clip for 13454, 23454, 13455
and 23455. UV-Stable, Clear Polycarbonate
Vertical Snap-In Lamp Support Clip for 13453 and 23453.
UV-Stable, Clear Polycarbonate
Stainless Steel Horizontal Lamp Support Clip, Short Version
Stainless Steel Horizontal Lamp Support Clip, Tall Version
23452-H
CAT. NO.
23452-A*
23452-B*
23452-H*
23452-V*
23452-MTS
23452-MTL
*Note: Leviton strongly recommends replacing support clips 23452-A, 23452-B, 23452-V and 23452-H
during lamp replacement.
0.20 (5.1)
SUGGESTED PANEL CUTOUT
FOR LAMP SUPPORT CLIPS
0.62 (15.7)
0.43 (10.9)
0.43 (10.9)
PANEL THICKNESS
.023-.039 (0.58-0.99) MAX.
INCLUDING PAINT
0.17
Vertical Lamp Support Clip—23452-V
0.20 (5.1)
0.78 (19.8)
0.83 (21.1)
23452-MTL
0.43 (10.9)
1.12 (28.4)
RO.37(9.4)
0.17 (4.3)
0.65 (16.5)
Horizontal Lamp Support Clip—23452-H
PLASTIC SUPPORT
1.45 (36.8)
1.31 (33.3)
0.83 (21.0)
23452-MTS
0.69 (17.5)
Fluorescent Lampholders
23452-V
)
5.54
18 (
Ø0.2
METAL CLIP
0.56 (14.2)
Horizontal Lamp Support Clips
23452-MTS, 234452-MTL
Horizontal Lamp Support Clip, Short
23452-MTS
Horizontal Lamp Support Clip, Tall
23452-MTL
SPECIFICATIONS AND FEATURES
• Choice of quality lamp support clips in a
variety of configurations for long twin
tube lamps with 2G11 base
• UV stable clear polycarbonate clips for
vertical or horizontal mounting
• Stainless steel clips with UV stable clear
polycarbonate base for horizontal
mounting only; short or tall versions
• Plastic clips for slide-on or screw-mount
S
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
18
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V
Compact Fluorescent Lampholders (CFLs)
10mm Compact Fluorescent Lampholders
For G23 and G23-2 Lamp Bases — Rating: 75 WATT 600V U R
MOUNTING
CAT. NO.
COLOR
Horizontal Snap-In
26719-100
White
Horizontal
Screw-Down
Vertical Top Snap-In
4-Hole Vertical
Screw-Down
Vertical Bottom
Snap-In
26719-200
White
LAMP
BASE
G23,
G23-2
G23,
G23-2
G23
G23,
G23-2
G23,
G23-2
26719-300* White
26719-400 White
26719-500
White
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
PL-S
5W, 7W
9W
DULUX S
5W, 7W, 9W
DULUX D
9W
BIAX,
5W, 7W
9W
DOUBLE
BIAX
9W
26719-100
*Not compatible with 9-watt DTT lamps
For GX23 and GX23-2 Lamp Bases — Rating: 75 WATT 600V U R
MOUNTING
CAT. NO.
Horizontal Snap-In
26720-100
4-Hole Vertical
Screw-Down
Vertical Bottom
Snap-In
White
w/Black
26720-200 White
w/Black
26720-300* White
w/Black
26720-400 White
w/Black
26720-500 White
w/Black
LAMP
BASE
GX23,
GX23-2
GX23,
GX23-2
GX23
GX23,
GX23-2
GX23,
GX23-2
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
PL-S
13W
PL-C
13W
DULUX S
13W
DULUX D
13W
BIAX
13W
DOUBLE
BIAX
13W
Fluorescent Lampholders
Horizontal
Screw-Down
Vertical Top Snap-In
COLOR
26719-200
*Not compatible with 13-watt DTT lamps
1.40
(35.56)
0.68
(17.27)
0.77-0.79
(19.56-20.06)
0.69
(17.53)
1.23
(31.24)
0.87 (22.10)
1.22 (30.99)
0.22
(5.59)
R 0.41
(10.41)
1.22 (30.99)
1.33 (33.78)
0.56
(14.22)
1.22 (30.99)
0.68
(17.27)
26720-300
Horizontal Snap-In CFLs
26720-100 Shown
0.39
(9.91)
0.13
(3.30)
0.39
(9.91)
NOTE: PUNCH PANEL FROM
THE DIRECTION
OF LAMPHOLDER INSERTION.
RECOMMENDED PANEL THICKNESS
0.023-0.039 (0.58-0.99) MAX
INCLUDING PAINT
0.13 (3.30)
1.01
(25.65)
0.88
(22.35)
NOTE: PUNCH PANEL FROM
THE DIRECTION
OF LAMPHOLDER INSERTION.
RECOMMENDED PANEL THICKNESS
0.023-0.039 (0.58-0.99) MAX
INCLUDING PAINT
26720-400
• Four screw holes for greater
mounting flexibility
• Wire-routing options for top or bottom side of mounting panel for
easier assembly
• White thermoplastic body
1.09 (27.8)
1.20 (30.6)
0.81 (20.6)
0.22 (5.5)
1.00 (25.4)
• “Smart” CFL Lampholders are
color-coded for easy wattage identification
• Bottom Snap-In versions for easier
panel assembly
• Snap-In versions designed for
16 Ga. panels
• Metal-spring lamp-retainer clip provides positive lamp retention and is
more durable than plastic clips
• Two wiring ports per contact speed
harness wiring
Vertical Top Snap-In CFLs
26720-300 Shown
1.39
(35.31)
PANEL CUTOUT
1.00 (25.4)
SPECIFICATIONS AND FEATURES
0.22
(5.59)
1.40 (35.6)
1.40
(35.56)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor
applications when properly enclosed
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
Ø 0.19
(4.75)
0.81 (20.6)
NOTE: RECOMMENDED MOUNTING
SELF-THREADING #8 SCREW
RECOMMENDED PANEL OPENING
4-Hole Vertical Screw-Down CFLs — 26720-400 Shown
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
S
19
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V
Compact Fluorescent Lampholders (CFLs)
10mm Compact Fluorescent Lampholders
For G24d Lamp Bases 2-Pin — Rating: 75 WATT 600V U R
MOUNTING
Bottom Snap-In
For 16 Ga. Panels
For 18-20 Ga. Panels
For 16 Ga. Panels
For 18-20 Ga. Panels
For 16 Ga. Panels
For 18-20 Ga. Panels
Bottom Screw-Down
4-Hole
26725-213
CAT. NO.
COLOR
LAMP
BASE
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
26725-201
26725-221
26725-202
26725-222
26725-203
26725-223
White
w/Black
Green
G24d-1
G24d-2
Orange
G24d-3
PL-C
10W, 13W
PL-C
18-W
PL-C
26W
DULUX D
10W, 13W
DULUX D
18W
DULUX D
26W
DOUBLE
BIAX 10W, 13W
DOUBLE
BIAX 18W
DOUBLE
BIAX 26W
26725-211
G24d-1
G24d-2
G24d-3
PL-C
10W, 13W
PL-C
18W
PL-C
26W
DULUX D
10W, 13W
DULUX D
18W
DULUX D 26W
DULUX T 26W
DOUBLE
BIAX
DOUBLE
BIAX 18W
DOUBLE
BIAX 26W
4-Hole
26725-212
White
w/Black
Green
4-Hole
26725-213
Orange
Fluorescent Lampholders
For G24q and GX24q Lamp Bases 4-Pin — Rating: 75 WATT 600V
Suitable for Dimming or Electronic Ballasts U R
MOUNTING
CAT. NO.
COLOR
LAMP
BASE
Bottom Snap-In
For 16 Ga. Panels
For 18-20 Ga. Panels
For 16 Ga. Panels
For 18-20 Ga. Panels
For 16 Ga. Panels
For 18-20 Ga. Panels
26725-401
26725-421
26725-402
26725-422
26725-403
26725-423
White
w/Black
Green
G24q-1
26725-419
SPECIFICATIONS AND FEATURES
• “Smart” CFL Lampholders are colorcoded for easy wattage identification
• Bottom snap-in versions for easier panel
assembly available for 16 Ga. and 18–20
Ga. panels
• All 4-pin lampholders have internal
rejection feature that prevents insertion
of 2-pin lamps
• Metal-spring lamp-retainer clip provides
positive lamp retention and is more
durable than plastic clips
• Two wiring ports per contact speed
harness wiring
• Four screw holes for greater mounting
flexibility
• Wire-routing options for top or bottom
side of mounting panel for easier
assembly
• White thermoplastic body
For 16 Ga. Panels
26725-404
For 18-20 Ga. Panels
26725-424
For Universal ballast only, 26725-429
18-20 Ga. Panels
Orange
Yellow
PHILIPS
PL-C
10W, 13W
G24q-2
PL-C
18W
G24q-3,
PL-C 26W
GX24q-3
PL-T
26W, 32W 26W, 32W
GX24q-4
PL-T 42W
White
G24q-3
GX24q-4
PL-T 26W,
32W, 42W
G24q-1
PL-C
10W, 13W
PL-C 18W
Bottom Screw-Down
4-Hole
26725-411
4-Hole
26725-412
White
w/Black
Green
4-Hole
26725-413
Orange
G24q-3,
GX24q-3
4-Hole
26725-414
Yellow
GX24q-4
PL-C 26W
PL-T
26W, 32W
PL-T 42W
4-Hole
26725-419
for Universal ballast only
White
G24q-3
GX24q-4
PL-T 26W,
32W, 42W
G24q-2
TESTING AND CODE COMPLIANCE
DULUX D/E
10W, 13W
DULUX D/E
18W
DULUX D/E
DULUX T/E
26W
DULUX T/E
42W
DULUX T/E
26W, 32W,
42W
DOUBLE
BIAX 10W, 13W
DOUBLE
BIAX 18W
DOUBLE
BIAX
PERFORMANCE
BIAX 42W
TRIPLE BIAX
26W, 32W,
42W
DULUX D/E
10W, 13W
DULUX D/E
18W
DULUX D/E
DULUX T/E
26W, 32W
DULUX T/E
42W
DULUX T/E
26W, 32W,
42W
DOUBLE
BIAX 10W, 13W
DOUBLE
BIAX 18W
DOUBLE
BIAX
26W
PERFORMANCE
BIAX 42W
TRIPLE BIAX
26W, 32W,
42W
Note: Lamp names are trademarked by manufacturers
1.37
(34.80)
0.15
(3.81)
0.062
(1.57)
1.36 (34.6)
0.68
(17.3)
0.267
(6.78)
1.400
(35.56)
GE
LIGHTING
1.063 (27.0 )
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor
applications when properly enclosed
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
OSRAM
SYLVANIA
KEYWAY
0.360
(9.14)
S
2.
(3
29
0.68
(17.27)
1.40
(35.56)
RECOMMENDED MOUNTING
HOLE PATTERN
0.81
(20.6)
RECOMMENDED PANEL THICKNESS 18–20 GA.
1.40
(35.56)
1.
0.560
(14.22)
7)
1.40 (35.6)
Bottom Snap-In CFLs for 18–20 Ga Panels
26725-421 Shown
4-Hole Bottom
Screw-Down CFLs
26725-213 Shown
1.00 (25.4)
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V
Compact Fluorescent Lampholders (CFLs)
10mm Compact Fluorescent Lampholders for High-Wattage Lamps
For GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V
Suitable for Dimming or Electronic Ballasts U R
CAT. NO.
COLOR
Bottom Snap-In
for 16 Ga. Panels
4-Hole Bottom
Screw-Down
2-Hole Bottom
Screw-Down,
Round Body
Bottom Snap-In
for 18–20 Ga. Panels
Bottom Snap-In
for 16 Ga. Panels
4-Hole Bottom
Screw-Down
2-Hole Bottom
Screw-Down,
Round Body
Bottom Snap-In
for 18–20 Ga. Panels
26725-405
Blue
LAMP
BASE
GX24q-5
OSRAM
SYLVANIA
DULUX T/E
57W
DULUX T/E
57W
DULUX T/E
57W
GE
LIGHTING
BIAX Q/E
57W
BIAX Q/E
57W
BIAX Q/E
57W
26725-415
Blue
GX24q-5
26725-4A5
Blue
GX24q-5
26725-425
Blue
GX24q-5
GX24q-6
DULUX T/E
57W
—
Red
GX24q-6
—
26725-4A6
Red
GX24q-6
—
BIAX Q/E
57W
BIAX Q/E
70W
BIAX Q/E
70W
BIAX Q/E
70W
26725-406
Red
26725-416
26725-426
Red
GX24q-6
—
1.36 (34.5)
7)
2.
29
0.81
(20.6)
0.68
(17.3 )
1.12 (28.6)
BIAX Q/E
70W
26725-425
1.40 (35.6)
1.00 (25.4)
1.40 (35.6)
26725-406
(3
1.
KEYWAY
1.00 (25.4)
RECOMMENDED MOUNTING SCREW #8 SELF-CUTTING
RECOMMENDED HOLE PATTERN
26725-416
4-Hole Bottom Screw-Down CFLs
26725-415 Shown
1.40 (35.6)
0.27 (6.8)
1.37 (34.8)
0.06
(1.6)
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor applications
when properly enclosed
• CSA Certified (File #LR-1863)
• NOM Certified (#057)
1.40 (35.6)
0.36
(9.1)
0.56 (14.2)
RECOMMENDED PANEL OPENING
RECOMMENDED PANEL
THICKNESS — 18–20 GA.
0.036-0.047
Bottom Snap-In CFLs for 18–20 Ga Panels
26725-426 Shown
1.40 (35.6)
1.37 (34.8)
0.24 (6.2)
1.40 (35.6)
TESTING AND CODE COMPLIANCE
KEYWAY
1.51 (38.4)
• “Smart” CFL Lampholders are color-coded for
easy wattage identification
• Bottom Snap-In versions for easier panel assembly available for 16 Ga. and 18–20 Ga. panels
• All 4-pin lampholders have internal rejection
feature that prevents insertion of 2-pin lamps
• Metal-spring lamp-retainer clip provides positive
lamp retention
• Two wiring ports per contact speed harness wiring
• Wire-routing options for top or bottom side of
mounting panel for easier assembly
• Bodies are white thermoplastic (with color-coding
as indicated)
• Quick-connect push-in wiring terminals accept
No. 18 AWG solid or twisted-and –overtinned
leads, stripped 3/8 inch
1.40 (35.6)
SPECIFICATIONS AND FEATURES
1.51 (38.4)
0.24 (6.2)
Fluorescent Lampholders
MOUNTING
KEYWAY
RECOMMENDED PANEL
THICKNESS — 18–20 GA.
0.036-0.047
26725-426
S
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
21
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V
Compact Fluorescent Lampholders (CFLs)
10mm Compact Fluorescent Lampholders with Round Bodies
For G24d Lamp Bases, 2-Pin — Rating: 75 WATT 600V
Bottom Screw-Down Mounting U R
26725-4A2
CAT. NO.
COLOR
26725-2A1
Black
LAMP
BASE
G24d-1
PHILIPS
26725-2A2
Green
G24d-2
PL-C
10W, 13W
PL-C, 18W
26725-2A3
Orange
G24d-3
PL-C, 26W
OSRAM
SYLVANIA
DULUX D
10W, 13W
DULUX D, 18W
DULUX T, 18W
DULUX D, 26W
DULUX T, 26W
GE
LIGHTING
DOUBLE BIAX
10W, 13W
DOUBLE BIAX 18W
DOUBLE BIAX 26W
For G24q and GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V
Bottom Screw-Down Mounting — Suitable for Dimming or Electronic Ballasts U R
CAT. NO.
COLOR
26725-4A1
Black
LAMP
BASE
G24q-1
26725-4A2
Green
Green
Orange
Orange
G24q-2
GX24q-2
G24q-3
GX24q-3
Yellow
GX24q-4
Blue
Red
No color code
White body
only
GX24q-5
GX24q-6
G24q-3
GX24q-4
26725-4A4
26725-4A3
3
4)
3.5
)
0.63
(15.9)
1.40 (35.6)
Ø
3
1.
3.
(3
0.20
(5.2
KEYWAY
Ø
PL-C, 18W
PL-C, 18W
PL-C, 26W
PL-T
26W, 32W
PL-T, 42W
DULUX D, 18W
DULUX T/E, 18W
DULUX D, 26W
DULUX T/E
26W, 32W
DULUX T/E, 42W
—
—
PL-T
26W, 32W
42W
DULUX T/E, 57W
—
DULUX T/E
26W, 32W,
42W
GE
LIGHTING
DOUBLE BIAX
10W, 13W
TRIPLE BIAX 13W
DOUBLE BIAX, 18W
TRIPLE BIAX, 18W
DOUBLE BIAX, 26W
TRIPLE BIAX
26W, 32W
PERFORMANCE
BIAX 42W
BIAX Q/E, 57W
BIAX Q/E, 70W
TRIPLE BIAX
26W, 32W, 42W
1.21 (30.8)
)
.25
0.1
4(
)
3
.3
4)
3.5
8
3.
(6.
26725-4A5
PL-C
10W, 13W
OSRAM
SYLVANIA
DULUX-D
10W, 13W
*For use with universal ballast only
Note: Lamp names are trademarked by manufacturers
Ø0
0.94
(23.8)
1.40 (35.6)
(27
Ø
0.63
(15.9)
4(
(6.
0.1
26725-4A5
26725-4A6
1.21 26725-4A9
1.0Universal*
1.40 (35.6)
8)
.25
Ø
Ø0
Fluorescent Lampholders
26725-4A3
PHILIPS
(3
1
1.09
(27.6)
0.20
(5.2
KEYWAY
SPECIFICATIONS AND FEATURES
0.94
(23.8)
1.40 (35.6)
All Round-Body CFLs
26725-4A5 Shown
0.94 (23.8)
1.1
3(
28
4°
.6)
0.63
(15.9)
3
RECOMMENDED PANEL OPENING FOR ALL
ROUND-BODY CFLs
• “Smart” CFL Lampholders are colorcoded for easy wattage identification
• All 4-pin lampholders have internal
rejection feature that prevents insertion
of 2-pin lamps
• Metal-spring lamp-retainer clip provides
positive lamp retention and is more
durable than plastic clips
• Two wiring ports per contact speed
harness wiring
• Wire-routing options for top or bottom
side of mounting panel for easier
assembly
• Bodies are white thermoplastic (with
color-coding as indicated)
• Quick-connect push-in wiring terminals
accept No. 18 AWG solid or twistedand–overtinned leads, stripped 3/8 inch
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor applications when properly enclosed
• CSA Certified (File #LR-1863)
• NOM Certified (#057)
S
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
22
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com