Tri-Base - Lavi Industries

Assembly Instructions • Assembly Instructions • Assembly Instructions
Tri-Base
Parts List:
(1) Allen Wrench
Required Tools
(1) Tri-Hub center piece
with Wedge Insert
(3) Half Moon Base
Goggles
(6) PFH Screws
Philliips Screw Driver
1. Turn the Tri-Hub Center Piece with Wedge Insert upside down. Insert one Half Moon Base. See Figure A.
A
B
C
D
2. Insert and secure two PFH screws. See Figure B.
3. Insert the remaining two Half Moon Bases into the Tri-Hub Center Piece and secure them with PFH Screws.
4.
Flip the fully-assembled Tri-Base so
that the Wedge Insert is facing up. The Tri-Base is now ready to receive the post. See Figure C.
5. Slide the Post over the Wedge Insert and secure with Allen Wrench. See Figure D.
© 2011 Lavi Industries
All Rights Reserved.
87-073 1.6.11 Tri-Base.
27810 Avenue Hopkins | Valencia, CA 91355
800.624.6225 | 877.ASK.LAVI | 661.257.7800
[email protected] | www.lavi.com