forest - FAE Group Land Clearing

Comments

Transcription

forest - FAE Group Land Clearing
FOREST
FOREST
Forestry Mulchers and Universal Forestry
Mulchers
Designed with passion and realized adopting particular constructive clever devices, the FOREST
product range’s machines stand out for their excellent robustness and reliability. Due to the use
of highly wear-resistant steels they are suitable to carry out particularly heavy tasks.
While the forestry mulchers are conceived for shredding trees, bushes, forestry cutting waste
and heaps of brushwood, the universal forest mulchers are suitable for cutting and crushing tree
stumps and roots, deep underground in uncultivated lands.
Versatile and efficient, these machines are available in two versions: a rotor with fixed tools or
with mobile hammers. Due to these characteristics, they can meet the specific requirements of
any kind of work. Coupled to tractors with power take-off and creeper gears, these machines
guarantee optimal performances.
1
The importance to details
The FAE machines are designed and
manufactured so as to ensure the highest
operability over the years. Only an extreme
attention to each construction detail, the use
of high quality materials and technologically
advanced components enable to attain the
exceptional performance standards which
characterize the machines with the FAE
trademark.
The guarantee of the original
In order to maintain these performances and
attain the highest efficiency after years of
use, FAE advises you to use its own original
spare parts exclusively, supplied on request.
In fact, the quality of the results is due to
the special design of the patented tools and
the availability of inserts in hard metal that
boost the resistance to wear and tear. The
replacement of the parts, both of fixed teeth
and free swinging hammers is done very
quickly and is extremely easy.
Only if you address to the FAE Service can
you be certain of the FAE original quality and
warrantee.
FOREST
UML/LOW
Forestry mulcher with fixed
teeth rotor for tractors
between 60 and 110 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids.
Options: hydraulic top link, special skids to go underground, pushing frame, possibility to have the rotor equipped with tooth type
“C/SD” or “D”.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
Especially developed for tractors with low three
point hitch (e.g. crawler tractors).
UML/LOW
Model
min
Tractor HP
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
C+C/SS
UML/LOW 150
60
100
540
1580
1840
930
200
32+2
UML/LOW 175
70
110
540
1820
2080
1060
200
36+2
UML/LOW 200
80
110
540
2060
2380
1190
200
42+2
The data refers to the machine without options.
Tooth type C (standard)
Tooth type C/SD (option)
Tooth type D (option)
Tooth type C/SS (side scraper)
3
FOREST
UML/SS
Forestry mulcher with fixed
teeth rotor for tractors
between 60 and 110 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.
Options: hydraulic top link, special skids to go underground, pushing frame, possibility to have the rotor equipped with
tooth type “C/SD” or “D”.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UML/SS
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall width
mm
UML/SS 150
60
110
540 o 1000
1580
1840
UML/SS 175
70
110
540 o 1000
1820
UML/SS 200
80
110
540 o 1000
2060
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
C+C/SS
970
200
32+2
2080
1040
200
36+2
2380
1110
200
42+2
The data refers to the machine without options.
Tooth type C (standard)
Tooth type C/SD (option)
Tooth type D (option)
Tooth type C/SS (side scraper)
4
FOREST
FML/SS
Forestry mulcher with
swinging hammers rotor
for tractors between
60 and 110 HP.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood.
Options: hydraulic top link, pushing frame.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
FML/SS
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
FML/SS 150
60
FML/SS 175
FML/SS 200
Overall
width mm
Weight
Kg
110
540 o 1000
70
110
80
110
1580
1840
950
200
24
540 o 1000
1820
2080
1020
200
28
540 o 1000
2060
2380
1090
200
32
The data refers to the machine without options.
Hammer Type FML
Grinding diameter
mm (max)
Teeth q.ty/type
FML
5
FOREST
UML/ST
Forestry mulcher with fixed
teeth rotor for tractors
between 50 and 110 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.
Options: hydraulic top link, special skids to go underground, pushing frame, possibility to have the rotor equipped with
tooth type “C/SD” or “D”.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UML/ST
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
C+C/SS
UML/ST 125
50
110
540 o 1000
1340
1630
840
200
26+2
UML/ST 150
60
110
540 o 1000
1580
1840
900
200
32+2
UML/ST 175
70
110
540 o 1000
1820
2080
970
200
36+2
UML/ST 200
80
110
540 o 1000
2060
2380
1040
200
42+2
The data refers to the machine without options.
Tooth type C (standard)
Tooth type C/SD (option)
Tooth type D (option)
Tooth type C/SS (side scraper)
6
FOREST
FML/ST
Forestry mulcher with
swinging hammers rotor
for tractors between
50 and 110 HP.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood.
Options: hydraulic top link, pushing frame.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
FML/ST
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
FML/ST 125
50
FML/ST 150
60
FML/ST 175
FML/ST 200
Overall
width mm
Weight
Kg
100
540 o 1000
110
540 o 1000
70
110
80
110
1340
1630
820
200
20
1580
1840
890
200
24
540 o 1000
1820
2080
950
200
28
540 o 1000
2060
2380
1020
200
32
The data refers to the machine without options.
Hammer Type FMM
Grinding diameter
mm (max)
Teeth q.ty/type
FMM
7
FOREST
UML/DT
Forestry mulcher with fixed
teeth rotor for tractors
between 80 and 130 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, “Anti
dust” machine body.
Options: hydraulic top link, mechanic or hydraulic pushing frame, special skids to go underground, possibility to have the rotor
equipped with tooth type “C/SD” or “D”.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UML/DT
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
UML/DT 200
80
130
1000
2060
UML/DT 225
90
130
1000
2300
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
C+C/SS
2380
1290
250
42+2
2620
1400
250
46+2
The data refers to the machine without options.
Tooth type C (standard)
Tooth type C/SD (option)
Tooth type D (option)
Tooth type C/SS (side scraper)
8
FOREST
FML/DT
Forestry mulcher with
swinging hammers rotor
for tractors between
80 and 130 HP.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood, adjustable skids, “Anti dust” machine body.
Options: hydraulic top link, mechanic or hydraulic pushing frame.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
FML/DT
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
FMM
FML/DT 200
80
130
1000
2060
2380
1350
250
32
FML/DT 225
90
130
1000
2300
2620
1460
250
36
The data refers to the machine without options.
Hammer Type FMM
9
FOREST
UMM
Forestry mulcher with fixed
teeth rotor for tractors
between 90 and 180 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, self ranging
system of the PTO drive shaft gearbox (NOT for UMM/ST 175), completely closed “Anti dust” machine body.
Options: mechanic or hydraulic pushing frame, special skids to go underground, raker teeth on hydraulic hood
(only for 200, 225 and 250), possibility to have the rotor equipped with tooth type “C/SD” or “D”.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UMM
Model
Tractor HP
min
max
PTO
rpm
UMM/ST 175
90
110
540 o 1000
UMM/DT 200
100
180
UMM/DT 225
110
UMM/DT 250
120
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
C+C/SS
1830
2110
1450
300
38+2
1000
2070
2490
1830
300
42+2
180
1000
2310
2730
1910
300
46+2
180
1000
2550
2970
1990
300
52+2
The data refers to the machine without options.
Tooth type C (standard)
Tooth type C/SD (option)
Tooth type D (option)
Tooth type C/SS (side scraper)
10
FOREST
FMM
Forestry mulcher with
swinging hammers rotor
for tractors between
90 and 180 HP.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood, adjustable skids ,completely closed “Anti dust”
machine body.
Options: hydraulic top link, mechanic or hydraulic pushing frame.
Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
FMM
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Teeth q.ty/type
FMM
FMM/ST 175
90
110
540 o 1000
1830
2110
1390
300
28
FMM/DT 200
100
180
1000
2070
2490
1650
300
32
FMM/DT 225
110
180
1000
2310
2730
1780
300
36
FMM/DT 250
120
180
1000
2550
2970
1920
300
40
The data refers to the machine without options.
Hammer Type FMM
11
FOREST
UMM/S
UMM/S/HP
Forestry mulcher with fixed
teeth rotor for tractors
between 130 and 300 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, hydraulic top
link, third line counter blades, self ranging system of the PTO drive shaft/gearbox. UMM/S/HP stronger transmission for tractors up to
280 HP.
Options: mechanic or hydraulic pushing frame, special skids to go underground, raker teeth on hydraulic hood, possibility to have the
rotor equipped with tooth type “B” or “B/SR”, tooth type “C” or “C/SD”.
Notes: For their correct usage, creeper gear transmission and reversible driving console
are recommended.
UMM/S
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight with rotor
Grinding diameter
Teeth q.ty
type C Kg type B Kg
mm (max)
type B+C/SS type C+C/SS
UMM/S 200
130
240
1000
2060
2490
2660
2970
350
80+2
44+2
UMM/S 225
140
240
1000
2300
2730
2780
3090
350
88+2
50+2
UMM/S 250
150
240
1000
2540
2970
2900
3210
350
102+2
56+2
Tractor HP
min
max
PTO
rpm
Working
width mm
UMM/S/HP
Model
Overall
width mm
Weight with rotor
Grinding diameter
Teeth q.ty
type C Kg type B Kg
mm (max)
type B+C/SS type C+C/SS
UMM/S/HP 200 130
300
1000
2060
2490
2710
3200
350
80+2
44+2
UMM/S/HP 225 140
300
1000
2300
2730
2830
3140
350
88+2
50+2
UMM/S/HP 250 150
300
1000
2540
2970
2950
3260
350
102+2
56+2
The data refers to the machine without options.
Tooth type B
Tooth type C
Tooth type B/SR (option)
Tooth type C/SD (option)
Tooth type C/SS (side scraper)
12
FOREST
UMH
UMH/S
Forestry mulcher with fixed
teeth rotor for tractors
between 110 and 390 HP.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids,
hydraulic top link, third line counter blades, self ranging system of the PTO drive shaft/gearbox.
Options: mechanic or hydraulic pushing frame, special skids to go underground, raker teeth on hydraulic hood, possibility to
have the rotor equipped with tooth type “C/SD” or type “A/SR”.
Notes: For their correct usage, creeper gear transmission and
reversible driving console
are recommended.
UMH
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
UMH 150
110
UMH 175
Weight with rotor Grinding diameter
Teeth q.ty
type C Kg type A Kg
mm (max)
type A+C/SS type C+C/SS
150
1000
1600
2070
2730
3050
400
60+2
32+2
130
150
1000
1840
2310
2910
3230
400
70+2
36+2
UMH 200
160
280
1000
2080
2550
3340
3690
400
78+2
40+2
UMH 225
180
280
1000
2320
2790
3520
3870
400
88+2
44+2
UMH 250
200
280
1000
2560
3030
3700
4050
400
96+2
48+2
PTO
rpm
Working
width mm
Overall
width mm
UMH/S
Model
Tractor HP
min
max
Weight with rotor Grinding diameter
Teeth q.ty
type C Kg type A Kg
mm (max)
type A+C/SS type C+C/SS
UMH/S 225
180
390
1000
2320
2790
3760
4010
400
88+2
44+2
UMH/S 250
200
390
1000
2560
3030
3910
4270
400
96+2
48+2
The data refers to the machine without options.
Tooth type A
Tooth type C
Tooth type A/SR (option)
Tooth type C/SD (option)
Tooth type C/SS (side scraper)
13
FOREST
SFL
Forestry mulcher and stone
crusher for tractors between
120 and 160 HP,
with mulching diameter
and maximum
working depth of 15 cm.
Standard equipment: PTO drive shaft with cam clutch, gearbox with free wheel, penetration skids, hydraulic rear hood, adjustable
counter knives, mechanic pushing frame, dosing blade.
Options: hydraulic top link, hydraulic pushing frame, road kit or hydraulic support roller.
SFL
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
kg
Grinding diameter Working Teeth q.ty/type
mm (max)
depth mm STCL + CSS
SFL 150
120 - 160
540 - 1000
1590
1900
1450
150
150
34 + 2
SFL 175
120 - 160
540 - 1000
1830
2150
1600
150
150
38 + 2
SFL 200
120 - 160
540 - 1000
2070
2380
1750
150
150
42 + 2
The data refers to the machine without options. *540 rpm for stone crushing – 1000 rpm for mulching
Tooth type STCL
Tooth type C/SS (side scraper)
14
FOREST
SSL Speed
Forestry tiller for tractors
between 100 and 220 HP
with a max grinding
diameter of 30 cm.
Standard equipment: gear transmission, PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.
Options: hydraulic top link, hydraulic support roller for height adjustment, self-levelling guard frame, stronger PTO drive line (W2600) (only
for DT-models).
Notes: for their correct usage, a creeper gear transmission is recommended
SSL Speed
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter Working depth Teeth q.ty/type
mm (max)
mm (max)
B+C/SS
SSL Speed 150
100 - 160
1000
1580
1880
2000
300
300
44 + 4
SSL Speed 175
110 - 160
1000
1820
2120
2160
300
300
50 + 4
SSL/DT Speed 200
120 - 220
1000
2060
2360
2600
300
300
58 + 4
SSL/DT Speed 225
130 - 220
1000
2300
2600
2810
300
300
66 + 4
SSL/DT Speed 250
140 - 220
1000
2540
2840
3030
300
300
74 + 4
The data refers to the machine without options.
Tooth type B (standard)
Tooth type B/SR (option)
Tooth type G (option)
Tooth type C/SS (side scraper)
15
FOREST
SSL
Forestry tiller for tractors
between 100 and 220 HP
with a max grinding
diameter of 30 cm.
Standard equipment: gear transmission, PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.
Options: hydraulic top link, hydraulic support roller for height adjustment.
Notes: For their correct usage, a creeper gear transmission is recommended.
SSL
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Working depth
mm (max)
Teeth q.ty/type
B+C/SS
SSL 150
100
160
1000
1580
1880
2080
300
300
58+4
SSL 175
110
160
1000
1820
2120
2260
300
300
70+4
SSL 200
120
220
1000
2060
2360
2620
300
300
78+4
SSL 225
130
220
1000
2300
2600
2810
300
300
86+4
SSL 250
140
220
1000
2540
2840
2990
300
300
100+4
The data refers to the machine without options.
Tooth type B (standard)
Tooth type B/SR (option)
Tooth type G (option)
Tooth type C/SS (side scraper)
16
FOREST
17
SSM
SSM/HP
Forestry tiller for tractors
between 150 and 300 HP with
a grinding diameter of 50 cm.
Standard equipment: double side gear type transmission, PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear
hood. In addition, for the SSM/HP model: stronger transmission for tractors up to 300 HP.
Options: hydraulic top link, hydraulic support roller for height adjustment, adjustable dosing blade, possibility to have the rotor equipped
with tooth type “A/SR”.
Notes: For their correct usage, a creeper gear transmission is recommended.
SSM
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Working depth
mm (max)
Teeth q.ty/type
A+MH
SSM 200
150
250
1000
2080
2410
3090
500
400
76+4
SSM 225
170
250
1000
2320
2650
3340
500
400
88+4
SSM 250
190
250
1000
2560
2890
3590
500
400
102+4
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Working depth
mm (max)
Teeth q.ty/type
A+MH
SSM/HP
Model
Tractor HP
min
max
SSM/HP 200
150
300
1000
2080
2410
3140
500
400
76+4
SSM/HP 225
170
300
1000
2320
2650
3390
500
400
88+4
SSM/HP 250
190
300
1000
2560
2890
3640
500
400
102+4
The data refers to the machine without options.
Tooth type A (standard)
Tooth type A/SR (option)
Tooth type F (option)
Side scraper Type MH
FOREST
SSH
Forestry tiller for tractors
between 160 and 350 HP
with a max grinding
diameter of 70 cm.
Standard equipment: double side gear type transmission, PTO drive shaft with cam clutch, gearbox with freewheel,
hydraulic rear hood.
Options: hydraulic top link, hydraulic support roller for height adjustment, adjustable dosing blade, possibility to have the rotor
equipped with tooth type “A/SR”.
Notes: For their correct usage, a creeper gear transmission is recommended.
SSH
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Grinding diameter
mm (max)
Working depth
mm (max)
Teeth q.ty/type
A+MH
SSH 150
160
280
1000
1600
1980
3670
700
500
58+4
SSH 175
180
280
1000
1840
2220
3920
700
500
68+4
SSH 200
200
350
1000
2080
2460
4250
700
500
78+4
SSH 225
220
350
1000
2320
2700
4580
700
500
88+4
SSH 250
240
350
1000
2560
2940
4850
700
500
98+4
The data refers to the machine without options.
Tooth type A (standard)
Tooth type A/SR (option)
Tooth type F (option)
Side scraper Type MH
18
FOREST
SCH
SCH/GT
Stump cutter for tractors
between 130 and 350 HP
with a max working depth
of 60 cm.
Standard equipment: SCH 45 and SCH 55: PTO drive shaft with cam clutch, hydraulic side shifting, belts transmission.
SCH/GT 65: PTO drive shaft with cam clutch, hydraulic side shifting, gear transmission.
SCH/GT 75: PTO drive shaft with cam clutch, gear transmission.
Options: hydraulic top link, possibility to have the rotor equipped with tooth type “A/SR”.
Notes: For their correct usage, a creeper gear transmission is recommended.
SCH with hydraulic side shifting
Model
Tractor HP
min
max
PTO
rpm
Working
width mm
Overall
width mm
Weight
Kg
Working depth mm
(max)
Teeth q.ty/type
A+MH
SCH 45
130
180
1000
520
1800
1970
500
30+4
SCH 55
160
280
1000
630
1800
2690
500
36+4
PTO
rpm
Working
width mm
Overall
width mm
SCH/GT
Model
Tractor HP
min
max
Weight
Kg
Working depth mm
(max)
Teeth q.ty/type
A+MH
SCH/GT 65*
180
300
1000
730
1800
2900
500
28+4
SCH/GT 75
200
350
1000
810
1280
3200
600
34+4
The data refers to the machine without options. * with hydraulic side shifting
Tooth type A (standard)
Tooth type A/SR (option)
Tooth type F (option)
Side scraper Type MH
19
AGRICULTURE
ROAD
HYDRAULIC
PRIME MOVER
RECYCLING
Technical datas on this catalogue can be modified without notice. DP030001 - 07/2013
FOREST
Authorized dealer
FAE GROUP S.p.A. Zona Produttiva, 18 - P. O. Box 61 38013 Fondo (TN) Italy
tel. +39 0463 840 000, fax +39 0463 840 099, [email protected], www.fae-group.com

Similar documents

forest - Special

forest - Special product range machines stand out for their excellent robustness and reliability. Due to the use of highly wear-resistant steels they are suitable for carry out particularly heavy tasks. While the f...

More information