The ULTIMATE LUBER - Lube Systems of California

Comments

Transcription

The ULTIMATE LUBER - Lube Systems of California
Introducing . . .
A.T.S. ELECTRO-LUBE
The most powerful self-contained, single point luber available!
The ULTIMATE LUBER
The Next Generation
With so many innovative features, the
refillable, motor-driven MD 2000 offers
so much more than any other lubricant
dispenser.
Now custom programmable
Ask us for more details.
More Power
Up to 800 PSI lets you lubricate up to
12 bearings using a distribution block.
More Value
Refillable features saves time and
money, while reducing down time.
More Versatility
Runs off internal battery pack or
optional external power sources.
More Adaptability
Can be used in single or multi-point
configurations.
Up to
800 PSI
Single-point
Multi-point
More Sizes, More Products
in MD & Ultimate
Available in three sizes:
500cc, 250cc and 125cc
DEPENDABLE LUBRICATION
Indicator Lights:
Custom programming
for luber available.
Please inquire.
Flashing green LED indicates
proper operation
Flashing red LED indicates
problems or low battery level
Motor
Replaceable battery pack
Translucent reservoir
allows for visual indication
of lubricant level
Precise metered lubrication
Low pressure spring-loaded
piston feeds the pump.
Units can be mounted in any
position
For year round operation
factory recommends multigrade lubricant, EP1 or EPO
as well.
Remote mounting three feet or less:
1/4” I.D. minimum
Up to 20 feet, 3/8” I.D. minimum
Standard grease fitting allows
units to be refilled with grease gun
Fixed displacement pump
delivers grease up to 800 PSI
Pressure relief valve
Effectively creates a sealed bearing to keep contaminants out and
to provide a fresh supply of clean
lubricant
Adapters available to fit
any thread size
Operating temperature from -10°C to +76°C (14°F to 170°F)
Full replacement warranty for 1 year from date of purchase with the exception of power supply or misuse.
COMPARISON CHART
This chart compares the lubricant output rate of the Electro-Luber MD™ with several common manual lubrication schedules. The Electro-Luber MD™ switch settings indicated will provide comparable lubrication to that of
the manual practice shown. Do not over-lubricate bearing. Please visit website for more information.
Manual Lubrication
Schedule
MD Model 125 Setting
MD Model 250 Setting
MD Model 500 Setting
Unit Life
Switch Setting
Unit Life
Switch Setting
Unit Life
Switch Setting
Daily lubrication 3 - 4 strokes
1 month
(30 days)
1 2 3 4 5 6 7
2 months
(60 days)
1 2 3 4 5 6 7
4 months
(120 days)
1 2 3 4 5 6 7
2-3 day lubrication
3 - 4 strokes
2 months
(60 days)
1 2 3 4 5 6 7
4 months
(120 days)
1 2 3 4 5 6 7
8 months
(240 days)
1 2 3 4 5 6 7
Weekly lubrication
8 - 10 strokes
3 months
(90 days)
1 2 3 4 5 6 7
6 months
(180 days)
1 2 3 4 5 6 7
12 months
(360 days)
1 2 3 4 5 6 7
Bi-weekly lubrication
8 - 10 strokes
6 months
(180 days)
1 2 3 4 5 6 7
12 months
(360 days)
1 2 3 4 5 6 7
24 months
(720 days)
1 2 3 4 5 6 7
Monthly lubrication
8 - 10 strokes
12 months
(360 days)
1 2 3 4 5 6 7
24 months
(720 days)
1 2 3 4 5 6 7
Bi-monthly lubrication
8 - 10 strokes
24 months
(720 days)
1 2 3 4 5 6 7
Printed in Canada 05/05

Similar documents