Morphuse Framing Solutions Ltd tel: fax: email: web: 0208 432 28

Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
Introduction
Established since 2006, Morphuse Framing Solutions is the vision of two contractors
with over 15 years of experience in the construction industry and seeing the
opportunity of Light Steel Framing (SFS) being widely specified by Architects and
Engineers in both residential and commercial sectors, decided to concentrate in this
field and achieving approval from Metsec Ltd and Hadley Framing Systems the market
leaders in SFS supply became approved installers of their systems.
With time, as a result of both, our Clients request and Morphuse's aim of giving a
more complete in house solution, Morphuse branched to other trades, and is now a
specialist in most internal partitions, ceilings and plastering methods.
OBJECTIVE:
To offer a very high standard service from indicativve to a detailed design for site
installation by our qualified teams we aim to assist our clients in any requirement
concerning our fields of expertise in any stage of the works, Morphuse Framing
Solutions assists throughout from tender to installation stage, working with the client
to achieve successful completion of its projects.
SERVICES:
Design - whether it is concept design or detailed working drawings, Our Team is set out
to help Architects, Structural Engineers and Contractors with any aspect of design,
all of our Design works are covered with Proffesional Indemnity insurance.
Value Engineering - Morphuse Framing Solutions realizes the Importance of Costing
and Programming to our clients and we offer our services and assistance in deciding on
the best on-site route to incorporate our clients needs
Installation - our specialist Teams and management are committed to ensure the
successful completion of our projects, over time we have developed our own in-house
quality management systems and control, making sure the end product
meets our clients expectations.
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
Health And Safety
Morphuse Framing Solutions are committed to providing a safe and
healthy workplace. We carry out work in accordance with the relevant
statutory provisions and take all reasonably practicable measures to
protect the safety and health of our employees and others who may be
affected by our work. We give priority to health and safety when
planning and supervising work.
The directors of Morphuse Solutions Ltd have appointed a senior
member of staff responsible for the company’s health and safety
management system which supports all our operations. While overall
responsibility for health and safety rests with the board of directors,
every employee from general labourers to project mangers on site are
trained to CSCS skill cards and management to SSSTS and SMSTS
standards.
To maintain and improve our high standards of safety we provide
employees with appropriate training with regular Tool Box talks and
employ independent safety professionals to monitor our performance
and reported to directors and to clients.
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
Systems & Products
We use a wide variety of different systems and products to suit.
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
External works
S.F.S
Metsec & Hadley
Load bearing walls
Free standing buildings
Infill walls
Finish to S.F.S
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
STO external insulation system
STO render system
STO rain screen cladding system
Trespa facades
Cement particle board
Versa panel
Kingspan
Celotex
Plywood
Sand and cement render
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
Internal works
S.F.S
Metsec & Hadley
Internal load bearing walls
Flooring system
Partition walls
British Gypsum & Knauf
Fire rated walls
Acoustic rated partitions
Impact resistant partitions
Water resistant partitions
Moisture resistant partitions
Independent wall liner
Gypliner system walls
Dot and dab adhesive system
Suspended ceilings
Metal
Armstrong
S.A.S
Burgess
Mineral fibre
Armstrong
Ecophon
Rockfon
USG
Treetex
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
Open cell
S.A.S
Tech ceiling
Armstrong
Plaster board
British Gypsum
CEP
Knauf
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk
Contacts @ Morphuse
Director
Elad Farkash:
02084322828
[email protected]
Estimating and Quantity surveying
Kulwinder S Lall:
02084322828
07584146779
[email protected]
Project management
Carl Gray:
02084322828
07565962784
[email protected]
Morphuse Framing Solutions Ltd
Unit 2, Sayer House
Oxgate Lane
London
NW2 7JN
tel:
fax:
email:
web:
0208 432 28 28
0208 150 65 58
[email protected]
www.morphusefs.co.uk