2014 Double Duty Pull Spreader Lit

DOUBLE DUTY
®
Pull Type Spreader
The GVM Double Duty spreader line offers unique control sys-
less than 15% coefficient of variation with granular fertilizer. Its
tems and the widest, most accurate spreading pattern in the indus-
wider spread pattern allows you to make fewer trips through the
try, regardless of varying terrain. Its unique spinner design and the
field, to minimize compaction and reduce fuel consumption.
ability to automate spinner speeds within three percent, the Double
Duty always maintains a constant spread pattern.
Featuring a 34 inch wide belt over chain conveyor, the Double
Duty spreader provides an even flow to the spinners with no
The Double Duty’s wide and accurate spread pattern is due to
bridging when spreading lime or litter. Its patented funnel
its patented, reverse rotating spinners and the pre-adjusted funnel,
divider allows material to flow to the spinners with pin-point
which forces material to fall directly onto the spinner disc. The
control and 24 inch computer controlled spinners maintain
Double Duty offers a guaranteed 90-105 foot spread pattern at a
consistency and accuracy.
• Single product applicator with multi-product options
• Spreads a guaranteed 90-105 ft
• Adjustable spread pattern
° Lime up to 60 ft
° Fertilizer 90-105 ft
• 34 in. belt-over-chain conveyor
• Manually controlled single gate
• PWM spinner speed control from the computer
• Tractor hydraulic pump: minimum 25-30 GPM at 2,500 PSI
• Adjustable combination hitch
• All 304 stainless steel construction
800-458-5123 • www.gvminc.com
2014_DDPull
Built to Last
DOUBLE DUTY PULL SPREADER
Hopper
Dimensions
Struck capacity
7 gauge sub frame, 4 x 2 x 3/16 stainless steel cross tubes
Construction
10 gauge, 304 stainless steel
Size
Material
Accuracy
180 count sensor, Raven or Ag Leader
Size and construction
Spread width
Spinner motors
Spinner speed
Belt control
Hilside divider
Frame
90-105 ft (27.4-32 m)
PWM controlled hydraulic system spreads down to
100 lb fertilizer/acre to 3 ton lime/acre at speeds over 8 mph
Commercial, heavy-duty gear motors with double
bearing output shafts, bottom mounted
to ¼ in. 304 stainless steel spinner nest assembly
Computer controlled hydraulic PWM valve
Rawson 6:1 reduction dual pinion spur gear drive with
two hydraulic Charlyn motors
Quick change, 304 stainless steel,
uniquely designed for lime and fertilizer
2 x 6 x ¼ in. rectangular tubing
Clearance
34 in. (0.86 m)
Hitch
Standard tires
18 ft 9 in. (5.72 m)
Features
• Toughest design in the spreading industry
• Unique control system offers special features to
control the 34 in. belt-over-chain conveyor to
ground speed, regardless of varying terrain
• Ability to automate spinner speeds within 3%
provides a constant spread pattern
• Variable rate application capabilities with a Raven
Viper DGPS controller (controller not included)
Options
25,000 lb single axle design, 120 in. centers
• Multi-product options: Fusion Insert and/or
MicroBin
Adjustable combination hitch
380/90R46
• Bin level sensors
Flotation tires
650/75R32 or 800/65R32, optional
Dimensions
5 ft x 102 in. wide, peaked ends
Hopper capacity
111 cu ft w/ Fusion Insert
• Shur-Lok Fusion Cable-Lok roll tarp with stainless
steel bows
PWM fast close drag valve with conveyor rate
sensor and bin level sensor
• Shur-Lok Fusion Electric Cable-Lok roll tarp with
stainless steel bows
Multi-Product Options
Capacity
Products
Control
MicroBin
24 in., 304 stainless steel
120 in. (3.05 m) center to center
Axle
Fusion
Insert
Twin-line with clear sight gauge tubing
Overall width
Overall length
Tires
#4, 34 in. belt-over-chain conveyor
Heavy duty pintle chain with multi-ply belt,
riveted to the crossbar, (5 rivets per crossbar)
Solid rubber sealer strips prevent material from leaking off chain
Application rate
Chassis
10 ft x 102 in. wide
Belt sealer
Chain Oiler
Spinners
250 cu ft (7.1 cu m)
Sub-frame construction
Dimensions
Conveyor
8.0 Ton
10 ft x 102 in. wide
Mounting
Construction
Capacity
• Brand of PWM control with 180 count rate sensor
and CAN node
3 ton, 95 cu ft
Simultaneously spread up to 2 products
Removable, mounts inside Double Duty after removing end gate
304 stainless steel with sight glass, vented for quick fill
1100 lb, 11 cu ft struck
Products
Spread granular micro-nutrients as a second or third product
Mounting
Removable, rear mounted
Control
Application rate
Hydraulic servo controlled metering wheel, with rate sensor
and single product control node
3-35 lb per acre
• DOT LED side marker lights, rear LED 3 light
lightbar, LED tail light kit, trailer plug, and
back-up alarm
• Raven or Ag Leader controller and GPS
• Raven ISOBUS system (compatible with John
Deere GreenStar, Case 7000 and Ag Leader
Integra controller or Raven VT terminal)
Built to Last
To find a dealer near you, please visit www.gvminc.com.