Rossi Gear Reducers, Gearmotors and Motors Product

Products
Media No. 4236
Rossi Gear Reducers,
Gearmotors and Motors
Product Overview
Habasit– Solutions in motion
Contents
2
Introduction
3
Applications
5
Worm and coaxial gear reducers and gearmotors
6
Planetary, parallel and right angle shaft gears
7
Industry gears, drive units and motion controls SR
8
Motion controls SM series and motors
9
HyCLEAN gears for corrosive, aseptic environments
10
The Habasit solution
11
Contacts
12
Product liability, application considerations
If the proper selection and application of Habasit and Rossi products are not recommended by an authorized Habasit sales specialist, the selection
and application of Habasit products, including the related area of product safety, are the responsibility of the customer. All indications / information are
recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular
applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match
product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES’ CONTROL, WE CANNOT ASSUME ANY LIABILITY
CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT /
MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.
Introduction
3
Comprehensive belting solutions
Habasit is the world’s leading manufacturer of power transmission and
conveyor belts. Our clients select from the broadest range of fabric-based
belts, plastic modular belts and power transmission belts worldwide.
By complementing these with top gear reducers and motors, we deliver
comprehensive solutions for every application.
Your solutions partner
To ensure the highest quality, and most robust and reliable gear reducers and
motors even for complex and difficult applications, Habasit selected Rossi as
our solutions partner in 2004. We integrated Rossi fully into the Habasit Group
in 2009 by taking a 100% shareholding, thus giving you the benefit of a single
partner for your entire solution.
Proven international leadership
Rossi of Modena, Italy, is an international leader in the design and production
of gear reducers, gearmotors and electric motors. With Rossi Habasit offers
one of the most comprehensive product ranges on the market. Always a
step ahead, over the past 50 years Rossi has pioneered several solutions –
including universal mounting and upgraded modular components – that are
now benchmarks in the power transmission field.
Quality, reliability – and a 3-year warranty
Every product designed and manufactured by Rossi delivers the highest levels of quality, reliability and
precision, and carries a 3-year warranty. We refer to www.rossi-group.com (select services/warranty) for
further important information.
Global service network
Through Habasit’s international network, Rossi products are available and supported worldwide. Clients
receive expert technical support and deliveries of spares (components and finished products) within 24 hours.
Proposals, data sheets and dimensional drawings also arrive within 24 hours. Technical manuals, assembly and
maintenance guides, and 3D CAD drawings, can be downloaded from www.rossi-group.com.
4
Applications
Fields of application
Rossi products are used across a broad range of applications.
Almost every industrial plant and machine operating today needs
power transmission. Thanks to its extensive product range, Rossi
serves customers in a wide variety of industries, including:
• Material handling/cranes
• Automotive
• Packaging/manufacturing
• Food/beverage
• Paper/wood
• Leather/textile
• Wind energy
• Iron/steel
• Mining/tunnelling
• Cement/ceramic
• Chemicals/rubber/plastics
• Civil construction/building
• Sewage and waste treatment
5
Worm and coaxial gear reducers and gearmotors
Worm gear reducers and gearmotors
A series
Size
14 sizes (32 ... 250)
Power
P1
0.09 ... 55 kW
Nominal torque
MN2
≤ 19,000 Nm
Transmission ratio
iN
7 ... 16,000
Worm gearmotors STANDARDFIT
AS series
Size
6 sizes (118 ... 742)
Power
P1
0.09 ... 5.5 kW
Nominal torque
MN2
≤ 670 Nm
Transmission ratio
iN
6 ... 75
Coaxial gear reducers and gearmotors
E series
Size
16 sizes (32 ... 180)
Power
P1
0.09 ... 75 kW
Nominal torque
MN2
≤ 10,000 Nm
Transmission ratio
iN
4 ... 6,300
Coaxial gearmotors STANDARDFIT
ES series
Size
8 sizes (0 ... 7)
Power
P1
0.09 ... 11 kW
Nominal torque
MN2
≤ 900 Nm
Transmission ratio
iN
4 ... 200
6
Planetary, parallel and right angle shaft gears
Planetary gearmotors (coaxial and right angle)
EP series
Size
14 sizes (001…085)
Power
P1
0.18 … 90 kW
Nominal torque
MN2
9 … 85,000 Nm
Transmission ratio
iN
9 ... 3,000 (coax)
iN
9 ... 2,500 (right angle)
Slewing drives
EPS
Size
13 sizes (100 … 10,000)
Nominal torque
MN2
1,500 … 125,000 Nm
Transmission ratio
iN
50 … 1,000
Wind drives – yaw and pitch
EPW
Size
15 sizes (100 … 10,000)
Nominal torque
MN2
1,600 … 125,000 Nm
Transmission ratio
iN
42.5 … 3,150
Parallel and right angle shaft gear reducers and
gearmotors G series (standard and long)
Size
18 sizes (40 ... 360)
Power
P1
0.09 ... 160 kW
Nominal torque
MN2
≤ 71,000 Nm
Transmission ratio
iN
2.5 ... 12,500
Parallel and right angle shaft gear reducers and
gearmotors for extruders GX series
Size
16 sizes (100 ... 451)
Power
PN2
≤ 1,710 kW
Nominal torque
MN2
≤ 132,200 Nm
Transmission ratio
iN
6.3 ... 28
7
Industry gears, drive units and motion controls SR
8
Industry parallel shaft gear reducers
H series
Size
10 sizes (400 ... 631)
Nominal power
PN2
16 ... 3,650 kW
Nominal torque
MN2
≤ 400,000 Nm
Transmission ratio
iN
8 ... 315
Drive units on swing base
RE series
Gear reducer size
140 ... 631
Motor size
132 ... 400
Nominal torque
MN2
≤ 400,000 Nm
Worm, coaxial, parallel, and right angle
shaft servo gears without motor
SR series
Worm
Coaxial
Right angle shaft with coupling
Parallel
Right angle
Worm
7 sizes (32 ... 81)
Accelerating torque MA2
36 … 747 Nm
Transmission ratio
7 … 239
i
Coaxial
11 sizes (32 … 101)
Accelerating torque MA2
31.5 … 2,000 Nm
Transmission ratio
4 … 118
i
Parallel
8 sizes (40 … 125)
Accelerating torque MA2
64 … 3,000 Nm
Transmission ratio
6.41 … 110
i
Right angle
8 sizes (40 … 125)
Accelerating torque MA2
66 … 3,000 Nm
Transmission ratio
6 … 124
i
9
Motion controls SM series and motors
Low backlash planetary gears without motor
(coaxial) SM series
Size
5 sizes (57 ... 181)
Nominal torque
M N2
≤ 1,200 Nm
Accelerating torque
M A2
≤ 1,750 Nm
Emergency torque
M E2
≤ 2,800 Nm
Transmission ratio
i
3 ... 50
Low backlash planetary gears without motor
(right angle shaft) SM series
Size
3 sizes (84 ... 143)
Nominal torque
M N2
≤ 418 Nm
Accelerating torque
M A2
≤ 698 Nm
Emergency torque
M E2
≤ 1,250 Nm
Transmission ratio
i
3.4 ... 50
Asynchronous three-phase standard and brake motors
TX series (IE2-IE3)
Size
Power
63 ... 280
PN
Polarity
0.06 ... 90 kW
2, 4, 6, 8 poles
Heavy duty roller table motors
S series
Size
Peak torque polarity
Polarity
132 ... 250
Mk
≤ 1,670 Nm
4, 6 poles
HyCLEAN gears for corrosive, aseptic environments
HyCLEAN GUARD protection
Coating type
HC1 - HC2
Protection degree
IP55, IP66
Complying with
USDA
HyCLEAN SHIELD protection
Coating type
HC3 - HC4
Protection degree
IP66, IP68
Complying with
NSF
10
11
The Habasit solution
Customers first
At Habasit we understand that our success depends
on your success. This is why we offer solutions, not
just products; partnership, not just sales.
Since our foundation in 1946, Habasit has brought
this understanding of customer needs to life every
day and for every application. That’s why we’re the
No. 1 in belting today. Worldwide.
Learn more on www.habasit.com
Committed to innovation
Habasit is strongly committed to the continuous
development of innovative, value-added solutions.
Over 3% of our staff are dedicated exclusively to
R&D, and our annual investment in this area exceeds
8% of turnover.
Certified for quality
We deliver the highest quality standards
not only in our products and solutions,
but also in our employees’ daily work
processes. Habasit AG is certified
according to ISO 9001:2000.
Worldwide leading product range
Habasit offers the largest selection of belting, conveying, processing and complementary products in the
industry. Our response to any request is nothing less than a specific, tailor-made solution.
Fabric based conveyor
and processing belts
HabaFLOW®
Plastic modular belts
HabasitLINK® /KVP®
Positive drive conveyor
and processing belts
Habasit CleandriveTM
Power transmission
belts
HabaDRIVE®
Timing belts
HabaSYNC®
Chains (slat and
conveyor chains)
HabaCHAIN®
Machine tapes
Round belts
Seamless belts
Profiles, Guides,
Wear strips
HabiPLAST®
Fabrication tools
(joining tools)
Gearmotors
Electric motors
Motion control
Austria
Habasit GmbH, Wien
Phone: +43 1 690 66
www.habasit.at
Belgium
Habasit Belgium N.V., Zaventem
Phone: +32 2 725 04 30
www.habasit.be
Canada
Habasit Canada Ltd., Oakville
Phone: +1 905 827 4131
www.habasit.ca
China
Habasit East Asia Ltd., Hong Kong
Phone: +852 2145 01 50
www.habasit.com.hk
Habasit (Shanghai) Co., Ltd.
Shanghai
Phone: +8621 5488 1228
Phone: +8621 5488 1218
www.habasit.com.hk
France
Habasit France S.A.S., Mulhouse
Phone: +33 389 33 89 03
www.habasit.fr
Germany
Habasit GmbH
Eppertshausen
Phone: +49 6071 969 0
www.habasit.de
India
Habasit-Iakoka Pvt. Ltd., Coimbatore
Phone: +91 422 262 78 79
www.habasitiakoka.com
Italy
Habasit Italiana SpA
Customer Care:
Phone: 199 199 333
For int. calls: +39 0438 911444
www.habasit.it
Japan
Habasit Nippon Co. Ltd., Yokohama
Phone: +81 45 476 03 71
www.habasit.co.jp
Netherlands
Habasit Netherlands BV, Nijkerk
Phone: +31 33 24 72 030
www.habasit.nl
New Zealand
Habasit Australasia Ltd., Hornby
Phone: +64 3348 5600
www.habasit.co.nz
Norway
Habasit Norge A/S, Oslo
Phone: +47 81 55 84 58
www.habasit.no
Spain
Habasit Hispanica S.A.,
Barberà del Vallès
Phone: +34 93 719 19 12
www.habasit.es
Sweden
Habasit AB, Hindas
Phone: +46 301 226 00
www.habasit.se
Switzerland
Habasit GmbH, Reinach
Phone: +41 61 577 51 00
www.habasit.ch
USA
Habasit America
Conveyor belts, power
transmission belts, gearmotors
Suwanee, Georgia
Phone: +1 800-458-6431
www.habasitamerica.com
Habasit America
Seamless belts, timing belts
Middletown, Connecticut
Phone: +1 860 632 2211
www.seamlessbelts.com
www.habasync.com
Taiwan
Habasit Rossi (Taiwan) Ltd.
Taipei Hsien
Phone: +886 2 2267 0538
www.habasit.com.tw
Turkey
Habasit Kayis San. Ve Tic. Ltd. Sti.
Yenibosna - Bahcelievler - Istanbul
Phone: +90-212-654 94 04
www.habasit.com.tr
Poland
Habasit Polska Sp. zo.o.,
Dàbrowa Górnicza,
Phone: +48 32 639 02 40
www.habasit.pl
Ukraine
Habasit Ukraina, Vinnica
Phone: +38 0432 58 47 35
www.habasit.ua
Russia
OOO Habasit Ltd., St. Petersburg
Phone: +7 812 325 40 82
www.habasit.ru
United Kingdom and Ireland
Habasit Rossi (UK) Ltd., Silsden
Phone: +44 870 835 9555
www.habasitrossi.co.uk
Rossi is one of Europe’s largest
manufacturers of gear reducers,
gearmotors, inverters, standard
and brakemotors, and is a
member of the Habasit Group.
Rossi S.p.A.
Via Emilia Ovest 915/A
41123 Modena – Italy
Phone: +39 059 33 02 88
www.rossi-group.com
[email protected]
Singapore
Habasit Far East Pte. Ltd.,Singapore
Phone: +65 6862 55 66
www.habasit.com.sg
Headquarters
Habasit AG
Römerstrasse 1
CH-4153 Reinach, Switzerland
Phone +41 61 715 15 15
Fax +41 61 715 15 55
E-mail [email protected]
www.habasit.com
Registered trademarks
Copyright Habasit AG
Subject to alterations
Printed in Switzerland
Publication data:
4236BRO.VPR-en1011HQR