Driveline - Custom Chrome

Transcription

Driveline
Proudly Distributed by
697133
2 Inch “Shorty Drive” Belt Drive for Shovelhead
without Motor Plate
For those that want that stripped down look but still have the
convenience of a starter, BDL has you covered. This kit was designed
for electric start without using a motor plate and includes rear
pulley plate with their new “Shorty” starter housing, 2” clutch
basket, starter gear cover, rear pulley cover, front pulley with
hardware and belt.
642648 Fits all Shovelhead models 70-78��$1,087.99
696548
2 Inch Open Belt Drive for Shovelheads with
Motor Plate
BDL’s new 2” belt drives feature their beefy one piece 6061-T6 polished billet motor plate, their new shorty starter housing and starter
gear cover and their new side guard. These also include BDL’s ball
bearing lock up clutch. The Shovelhead version is also available with
a black All-Balls starter.
642646 Fits all Shovelhead models 70-78 (Comes with All-Balls starter)
�� $1,895.99
697133
697134
696548
2
Black fits all Shovelhead models 70-78�� $1,727.99
Clear Anodized fits all Shovelhead models 70-78 �� $1,727.99
Shovelhead 70-78, polished �� $1,578.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
BDL 8mm Primary Belt Drive Kits for
4-Speed Models
The 8mm belt pitch has been used for years on
primary drives and the 1 1/2"-wide kit is considered by
many to provide the best all-around combination for
dependable operation. Kits include front pulley, rear
clutch and hub/pulley . Designed for use with existing
clutch hub and clutch.
42524
40/60-tooth pulleys for electric start models from
65-78��$334.99
42525
41/61-tooth pulleys for electric start models from
80-E84��$334.99
42526
Same as CC #42525 but specifically for models
with factory rear belt drive and belt drive inner
primary��$334.99
42527
39/62-tooth pulleys for kick start models with
tapered engine shaft from 36-54��$268.99
42528
splined engine shaft from 55-64 ��$268.99
42529
42530
BDL 11 mm Primary Belt Drive Kits
1 1/2"-wide, 11 mm belt kit. For precision belt
adjustment, kits for aluminum-primary Big Twins include
a BDL idler that makes sure belt tension is correct (tin
primary models use tranny adjustment for correct
belt tension). All kits use 31-tooth engine pulleys and
47-tooth clutch pulleys.
42589
Fits 5-speed models with electric start from
80-E84��$369.99
42588
Fits 4-speed models with electric start from
65-E84��$367.99
42890
Same as CC #42588 but specifically for models
with factory rear belt drive and belt drive inner
primary��$369.99
42587
Fits splined shaft 4-speed kick start models from
65-E84��$323.99
42586
Fits splined shaft 4-speed kick start models from
55-64��$288.99
42585
Fits tapered shaft 4-speed kick start models from
36-54��$288.99
BDL 8 mm ’Bolt-In’ Belt Drive Kits
Engineered to handle the most brutal torque and horsepower demands.
Requires no primary case modifications to install. Features a cylindrical-shaped,
replaceable clutch dog capable of withstanding 1200 foot pounds of torque.
BDL’s steel hub design moves the clutch basket inward, eliminating unnecessary
weight hanging from the mainshaft. Barnett Kevlar clutch provides 70%
greater surface area than stock for maximum hook-up. Complete kit includes
front and rear pulleys, clutch, and a sealed primary bearing.
42673
Fits 5-speed Shovelhead models with chain rear drive from 80-83�� $653.99
42521
Fits 4-speed Shovelhead models with chain rear drive from 70-E84� $653.99
42674
Fits 4-speed Shovelhead models with belt rear drive from 80-E84�� $653.99
BDL 3"-Wide Primary Drive Kits for Kick Start
Applications
Eliminate gyroscopic imbalance and belt whipping found in many 3" drives
with a BDL drive kit that puts the inner hub a full inch further inboard than
most other belt drives. With the rear pulley further over the main shaft virtually
all instability in the primary drive is eliminated. The 8 mm pulleys are hard
anodized and use a special belt that traps less air than HTD belts. The rear
pulley has a double row bearing that supports a ‘Stressproof’ steel clutch hub.
Also included are a clutch and polished aluminum pressure plate. Safety guards
are always recommended with 3" drive systems.
42541
Kit with 47/76-tooth pulleys for Panhead and Shovelhead models with
splined shaft from 55-E84 ��$776.99
42542
Kit with 47/72-tooth pulleys (for less engine speed) for Shovelhead models with splined shaft from 65-early 84 ��$776.99
42540
Kit with 47/76-tooth pulleys for Panhead and Knucklehead models with
tapered shaft from 36-54��$776.99
w w w.cu sto m c h ro m e.co m
3
42534
Complete “Open Belt” Primary Drive Kit for
4-Speed Cases
Another primary drive kit from the “Jammer” Tech boys. Developed
while putting together our “Jumpin’ Bail” bike and designed to be
used in both rigid and swingarm models, this kit gives your bike an
old school look with the benefit of electric start. To be used with
4-speed transmissions or 4, 5, or 6 speed transmissions in a 4-speed
case with no modifications required. This kit includes such items as
billet bearing support, ProFlex 4 gauge black jacket cable, BDL belt,
47 tooth front & 76 tooth rear pulleys, 5-finger clutch hub and clutch
set, starter & high-output charging system, adjustable transmission
mounting plate, hardware and more. This is the kit you need to
install an “Open Belt Drive” primary to our Pandemonium or S&S
Shovelhead engines and a transmission using a 4-speed case. One
convenient kit that’ll save you time and money…sweet!
633702 Complete “Open Belt” Primary Drive Kit for 4-Speeds �$2,695.99
43034
Replacement Belt��$53.99
688052
BDL Wide-Belt Primary Drives for Kick Start Big
Twins
The 2" and 3"-wide pulleys and clutch hubs are cast from 356-T6
aluminum and machined in BDL’s own foundry and machining
operation. These kits use the stock clutch hub and clutch, and include
76-tooth clutch basket and 47-tooth engine pulleys, 8mm-pitch belt,
and ‘Big Fix’ clutch hub roller bearings.
42534
3"-wide kit for Big Twins with splined shaft from 55-E84�� $421.99
42533
3"-wide kit for Big Twins with tapered shaft from 36-54 �� $421.99
42532
2"-wide kit for Big Twins with splined shaft from 55-E84�� $356.99
42531
2"-wide kit for Big Twins with tapered shaft from 36-54 �� $356.99
42039
Alternator Cover
Use on alternator Big Twin motors to protect your alternator and help
cool it by acting as a heat sink. Has mounting lug for our belt shroud
built in. Made of aluminum casting and highly recommended for all
open belt drive installations. Sold each.
42039
Alternator cover polished ��$32.99
688052 Alternator cover black ��$35.99
4
BDL Retro-Fit Clutch for 3" Primary Belt Drives
This complete clutch package features BDL’s advanced design that
moves weight in-board of the bearing to eliminate gyroscopicinduced vibration in the primary drive. Complete with Kevlar clutch,
polished aluminum pressure plate with springs, shoulder bolts, clutch
basket, steel clutch hub, double sealed bearing and all hardware. It is
designed to be used with existing 3" front pulley and 8mm-pitch belts
on 36-early 84 kick start models.
42543
Complete kit��$565.99
Slotted Primary Cover for Big Twins
This vented cover provides additional cooling and a custom look.
Starter bearing not included.
250703 Fits 4-speed Big Twins 70-E84 with primary belt drive��$179.99
’Diamond Grill’ Belt Drive Outer Primary Covers
Reinforced die-cast outer primaries for 4-speed Big Twins from
70-E84. FL cover has cast-in floorboard mounting tab. Show-chromed
‘Diamond Grill’ venting provides cooling for belt drive. Complete with
chrome hardware, starter shaft bearing and bearing spacers.
28060
Fits 4-speed FX models from 71-E84��$219.99
28067
Fits 4-speed FL models from 70-E84 ��$219.99
15156
Replacement derby cover with screws��$20.99
17384
17382
Motor Sprockets for Big Twins
Motor Sprocket Nut and Washer
Fits Big Twins 55-05.
250971 ��$19.99
Tapered
Fit Big Twins from 36-54.
17382
23 tooth��$20.99
17383
24 tooth��$21.99
18336
25 tooth��$20.99
Splined
Fit Big Twins from 55-84.
17384
23 tooth��$22.99
17385
24 tooth��$21.99
18337
25 tooth��$22.99
070183
070179
Magnetic Drain Plug and Washer
Primary Chain Adjuster Linings and Retainers for
Sportster Models
For Original Equipment or CC inner primaries. Fits 4-speed Big Twins 65-86.
28812
Replaces OEM 60348-65A (bag of 1)�� $24.99
070183
070179
Adjuster lining kit for Sportster models from 58-76. Includes
lining and retainer (repl. OEMs 39978-58, 39979-58A)��$9.99
Retainer ONLY for Sportster models from 58-76 (repl. OEM
39979-58A) ��$2.99
5
651328
651327
651329
28282
28281
28280
28289
Steel ‘Tin-Style’ Primaries for Electric-Start Big Twins
Chromed-steel or black powder coated, inner and outer ‘tin-style’ primaries for
4-speed Big Twins from 65-E84 with electric start and forward controls.
Note: Will not work with diaphragm clutches.
Outer Covers
28289
Fits models from 70-E84 chrome��$103.99
Inner Cover Adaptor
Permits installation of early primaries (CCI #’s 28286 or 28287) on 70-E84 models
when no electric starter is used.
28282
Chrome cover��$92.99
651327 Black cover ��$124.99
28286
28287
Steel ‘Tin-Style’ Primaries for Kickstart
Big Twins
Chrome-plated or black powder coated primaries for
4-speed Big Twins are accurate reproductions for Original
Equipment applications. Mounting hardware included.
55-69 inner primaries can only be used if aluminum
primary and electric starter is removed. 651317 may only
be use on 55-69 models without compensator.
Outer Covers
28286
36-54 chrome ��$119.99
28287
55-69 chrome ��$119.99
651317 36-64 chrome smooth��$136.99
651328 36-54 black ��$145.99
651329 55-69 black ��$145.99
Inner Covers
28281
36-54 chrome ��$87.99
28280
55-64 chrome ��$87.99
651314 65-69 chrome ��$104.99
651323 36-54 black ��$128.99
651325 55-64 black ��$114.99
651326 65-69 black ��$107.99
651316 inner primary screws (10pk) ��$11.99
6
12266
Chrome Covers for ‘Tin’ Style Outer Primary Covers
Enhance the look of your ‘tin’ style primary with these heavy-gauge covers.
12266
Inspection cover��$7.99
651331 Black dimpled inspection cover ��$16.99
651332 Black smooth inspection cover��$13.99
12267
Derby cover��$12.99
651330 Black derby cover��$22.99
651315 Derby and inspection cover screws��$15.49
Mainshaft Sprocket Spacers
Santee 5-Speed Transmission in a 4-Speed Rigid
Frame Mounting Plate
Get the proper clearance between the transmission sprocket
and case on 80-11 4-speed chain drive models, and earlier style
transmissions in conjunction with aftermarket sprockets.
12225
Spacer, sprocket (repl. OEM 35079-80) pack of 5��$12.99
The master minds at Santee have came up with a transmission
mounting plate that allows you to mount a 5-speed transmission for
Softail models in a 4-speed rigid frame. This will allow you to build
that ‘Old School’ scooter you have been thinking of but with some
‘New School’ tricks.
650139 Raw steel mounting plate��$69.99
Note: This conversion will require you to update your 4-speed primary and starter to those
fitted to 5-speed Softail models. Additionally, if you use a 86-89 Softail transmission, you will
need to use a 86-89 clutch hub, and if you use a 90-99 transmission, you will need to use a
matching clutch hub.
Offset Sprocket Kits for 4-Speed Big Twin
Models
Steel Offset Transmission Mounting Plates
Permit you to put 5-speed transmissions for Softail models in 4-speed
rigid frames. Made from 3/16" steel plate and are machined, not
stamped. Offset versions are available for wide tire applications.
Made in the USA by Motorway.
632009 Stock with no offset ��$69.99
632010 1/4" offset��$69.99
632011 1/2" offset��$69.99
632012 3/4" offset��$69.99
632013 1" offset��$69.99
632014 1 1/4" offset ��$69.99
Note: This conversion will require you to update your 4-speed primary and starter to those
fitted to 5-speed Softail models. Additionally, if you use a 86-89 Softail transmission, you will
need to use a 86-89 clutch hub, and if you use a 90-99 transmission, you will need to use a
matching clutch hub.
The perfect answer for problems posed by the mounting of custom
wide rear tires or wheels. Includes offset transmission sprocket,
precision machined rear sprocket spacer plate and hardware.
25657
Kit with 22-tooth sprocket ��$32.99
25598
25599
Replacement Sprockets
Specifically for the kits listed above.
18385
22-tooth��$19.99
18386
23-tooth��$14.99
18387
24-tooth��$14.99
Note: Designed to ease problems encountered on some custom applications. 1979
through 1985 FX models require substantial modifications including changeover to
a Prestolite starter. Custom Chrome will happily provide a detailed instruction sheet
before your purchase so that you can better determine its benefits for your particular
application.
612385
612383
Vulcan Engineering
Offset Sprockets
Offset Transmission Plates
These 1-inch offset mounting plates for 5-speed Softail transmissions,
make assembly of Wide Drive swingarm or extra wide rigid-framed
customs a snap. The hot set-up for building that extra-wide ride.
17285
Chrome mounting plate ��$19.99
17286
Raw steel mounting plate��$15.49
Machined from 4140 tool steel
bar stock. Fits 5-speed Big Twin
models from 85-06.
.250” Offset Sprockets
612382 21-tooth sprocket
612369
��$106.99
612372
612373
23-tooth sprocket
��$119.99
24-tooth sprocket
��$119.99
23-tooth sprocket
24-tooth sprocket
612375
��$106.99
612368
612382
��$119.99
��$119.99
��$119.99
24-tooth sprocket
��$119.99
1.00” Offset Sprockets
612370
23-tooth sprocket
612376
24-tooth sprocket
612377
��$106.99
612371
��$119.99
��$119.99
��$106.99
23-tooth sprocket
��$119.99
24-tooth sprocket
��$119.99
7
1954-E1979
XL MODELS
1936-1979
4-SPEED
L1979-E1984
XL MODELS
1980-1985
4-SPEED
L1984-1990
XL MODELS
1980-1984
5-SPEED
Premium Transmission Sprockets
Precision-machined American-made transmission sprockets are plated
for corrosion resistance and fully hardened for maximum service and
performance.
For Big Twins from 36-79
26418
22 tooth (repl. OEM 35203-36)��$22.99
12226
23 tooth (repl. OEM 35212-73)��$22.99
12227
24 tooth��$22.99
12228
25 tooth��$21.99
12229
26 tooth��$21.99
For Big Twins with 4-Speed Transmissions from 80-85
12220
22 tooth (repl. OEM 33338-83)��$21.99
12221
23 tooth (repl. OEM 33337-83)��$22.99
12223
24 tooth��$21.99
12224
25 tooth��$21.99
For Sportster and K Models 54-79
080119 19 tooth (repl. OEM 35197-52)��$26.99
12230
21 tooth (repl. OEM 35205-52A) ��$28.99
12231
22 tooth��$28.99
18334
23 tooth��$28.99
18335
24 tooth ��$28.99
For Sportster Models from 79-84
18340
21 tooth (repl. OEM 35205-79A) ��$28.99
18341
22 tooth ��$28.99
18342
23 tooth ��$28.99
18345
21 tooth (repl. OEM 35208-84) ��$28.99
18346
22 tooth ��$28.99
18347
23 tooth ��$28.99
For 5-Speed Evolution Sportster Models from 91-92
18355
21 tooth (repl. OEM 37709-89) ��$35.99
18356
22 tooth ��$35.99
18357
23 tooth ��$35.99
8
Belt to Offset Sprocket Conversion Kit for
5-Speed Big Twins
Install 150-series tires on 5-speed Big Twin models by converting
from belt to chain drive. Offset 24-tooth front sprocket and spacer
moves the rear drive chain away from the tire. The stock final drive
ratio on 5-speed models is 2.1875. Installation in conjunction with a
51-tooth rear sprocket will change the ratio to 2.125, with a 48-tooth
rear sprocket it will lower to 2.000 which is ideal for stroker motors.
Fits Softail models from 86-05 when used with 73-85 4-speed rear
sprockets, and FXR models from 85-94 when used with rear sprockets
originally for FXR’s.
25658
Heavy-Duty Transmission Sprockets
High-quality imported transmission sprockets provide a lower-cost
alternative to our American-made Premium transmission sprockets.
Plated for corrosion resistance and fully hardened for maximum service.
For Big Twins from 36-79
18360
22 tooth (repl. OEM 35203-36) ��$14.99
18361
23 tooth (repl. OEM 35212-73) ��$14.99
18362
24 tooth ��$14.99
18363
25 tooth ��$14.99
18364
26 tooth ��$14.99
18365
22 tooth (repl. OEM 33338-83) ��$14.99
18366
23 tooth (repl. OEM 33337-83) ��$14.99
18367
24 tooth ��$14.99
18368
25 tooth ��$14.99
For Big Twins with 5-Speed Transmissions from 80-84, and 5in4
18369
22 tooth (repl. OEM 33336-83) ��$14.99
18370
Transmission chain sprocket, 23 tooth (repl. OEM 33336-83)
��$14.99
18371
24 tooth ��$14.99
For Sportster and K Models 54-79
18382
20 tooth ��$20.99
18378
21 tooth (repl. OEM 35205-52A) ��$20.99
18379
22 tooth ��$20.99
18380
23 tooth ��$20.99
18381
24 tooth ��$21.99
18372
21 tooth (repl. OEM 35205-79A) ��$21.99
18373
22 tooth��$21.99
18375
21 tooth (repl. OEM 35208-84T) ��$14.99
18376
22 tooth ��$14.99
18377
23 tooth ��$14.99
19519
080406
Sprocket Covers for Sportster Models
These aluminum sprocket covers are available with your choice of a
polished or a chrome finish and are accurate reproductions of the
Original Equipment parts.
Fit 4-Speed Models from 82-90
19519
Chrome��$39.99
19520
Polished (repl. OEM 34911-81TB)��$35.99
Fit 4-Speed Models from 71-76 with Kick and/or Electric Start
080406 Chrome��$49.99
080400 Polished (repl. OEM 34871-71)��$40.99
‘Flat’ and ‘Domed’ Derby Covers
Chromed or black heavy-gauge flat-steel or die-cast domed derby
covers. Fit all Big Twin models from 70-98.
15148
Chrome flat derby cover (repl. OEM 52573-77T)��$13.99
25230
Chrome domed derby cover (repl. OEMs 60668-84A, 25392-84T)
��$22.99
688055
Black domed derby cover (repl. OEMs 60668-84A, 25392-84T)
12266
��$21.99
Chrome Covers for ‘Tin’ Style Outer Primary
Covers
Enhance the look of your ‘tin’ style primary with these heavy-gauge
covers.
12266
Inspection cover��$7.99
12267
Derby cover��$12.99
9
‘Sinister 8’
RevTech Belt Pulleys
Year
Touring Models
Width
07
FLHT/FLHR/FLTR Models
1"
66-Tooth
04-06
1 1/8"
70-Tooth
00-03
1 1/2"
70-Tooth
84-99
1 1/2"
70-Tooth
84-99
1 1/2"
65-Tooth
Year
FLST Softail Models
07-11
FLST Models with 150 tire*
1"
66-Tooth
07-11
FLSTF Fatboy Models w/ 200 tire*
20mm
66-Tooth
00-06
FLST Models
1 1/8"
70-Tooth
84-99
FLST Models
1 1/2"
70-Tooth
84-99
FLST Models
1 1/2"
65-Tooth
Year
FXST Softail Models
07-11
FXST Models with 200 tire
20mm
66-Tooth
08-11
FXCW/C Models*
20mm
66-Tooth
06
20mm
70-Tooth
00-05
1 1/8"
70-Tooth
84-99
FXST Models
1 1/2"
70-Tooth
1 1/2"
65-Tooth
84-99
FXST Models
Year
Dyna Models
07-11
All FXD Models*
1"
66-Tooth
00-06
All FXD Models
1 1/8"
70-Tooth
84-99
All FXD Models
1 1/2"
70-Tooth
84-99
All FXD Models
1 1/2"
65-Tooth
Year
FXR Models
00-11
All FXR Models
1 1/8"
70-Tooth
84-99
All FXR Models
1 1/2"
70-Tooth
84-99
All FXR Models
1 1/2"
65-Tooth
* These models require an additional pulley spacer (sold separately) for proper installation.
10
Tooth
‘Speed Star’
‘Super Charger’
Sinister 8
Chrome
Price
Sinister 8
'Midnight
Series'
Price
Super
Charger
Chrome
Super Charger
Price 'Midnight
Series'
Price
SpeedStar
Chrome
Price
SpeedStar
'Midnight
Series'
Price
603143
$469.99
603118
$469.99
602888
$469.99
602865
$469.99
602840
$469.99
602817
$469.99
603142
$469.99
603117
$469.99
602890
$469.99
602867
$469.99
602842
$469.99
602819
$469.99
603140
$469.99
603115
$469.99
602892
$469.99
602869
$469.99
602844
$469.99
602821
$469.99
603140
$469.99
603115
$469.99
602892
$469.99
602869
$469.99
602844
$469.99
602821
$469.99
603141
$469.99
603116
$469.99
602897
$469.99
602896
$469.99
602895
$469.99
602894
$469.99
FLST Softail Models
603143
*
$469.99
603118
* $469.99
602888
$469.99
602865
$469.99
602840
* $469.99
602817
*
603145
*
*
$469.99
$469.99
603120
* $469.99
602889
$469.99
602866
$469.99
602841
* $469.99
602818
603142
$469.99
603117
$469.99
602890
$469.99
602867
$469.99
602842
$469.99
602819
$469.99
603140
$469.99
603115
$469.99
602892
$469.99
602869
$469.99
602844
$469.99
602821
$469.99
603141
$469.99
603116
$469.99
602897
$469.99
602896
$469.99
602895
$469.99
602894
$469.99
$469.99
FXST Softail Models
603145
*
$469.99
603120
* $469.99
602889
$469.99
602866
$469.99
602841
* $469.99
602818
*
603145
*
*
$469.99
$469.99
603120
* $469.99
602889
$469.99
602866
$469.99
602841
* $469.99
602818
603144
$469.99
603119
$469.99
602891
$469.99
602868
$469.99
602743
$826.99
602820
$469.99
603142
$469.99
603117
$469.99
602890
$469.99
602867
$469.99
602842
$469.99
602819
$469.99
603140
$469.99
603115
$469.99
602892
$469.99
602869
$469.99
602844
$469.99
602821
$469.99
603141
$469.99
603116
$469.99
602897
$469.99
602896
$469.99
602895
$469.99
602894
$469.99
$469.99
Dyna Models
603143
$469.99
603118
* $469.99
602888
$469.99
602865
$469.99
602840
* $469.99
602817
603142
*
$469.99
603117
$469.99
602890
$469.99
602867
$469.99
602842
$469.99
602819
$469.99
603140
$469.99
603115
$469.99
602892
$469.99
602869
$469.99
602844
$469.99
602821
$469.99
603141
$469.99
603116
$469.99
602897
$469.99
602896
$469.99
602895
$469.99
602894
$469.99
603142
$469.99
603117
$469.99
602890
$469.99
602867
$469.99
602842
$469.99
602819
$469.99
603140
$469.99
603115
$469.99
602892
$469.99
602869
$469.99
602844
$469.99
602821
$469.99
603141
$469.99
603116
$469.99
602897
$469.99
602896
$469.99
602895
$469.99
602894
$469.99
*
$469.99
FXR Models
* These models require an additional pulley spacer (sold separately) for proper installation.
11
T-5
Velocity
Year
07
04-06
00-03
84-99
84-99
Year
07-11
07-11
00-06
84-99
84-99
Year
07-11
08-11
06
00-05
84-99
84-99
Year
07-11
00-06
84-99
84-99
Year
00-11
84-99
84-99
Touring Models
FLHT/FLHR/FLTR
FLHT/FLHR/FLTR
FLHT/FLHR/FLTR
FLHT/FLHR/FLTR
FLHT/FLHR/FLTR
FLST Softail Models
FLST with 150 tire*
FLSTF with 200 tire*
FLST
FLST
FLST
FXST Softail Models
FXST with 200 tire*
FXCW/C*
FXST with 200 tire
FXST with 150 tire
FXST
FXST
Dyna Models
FXD*
FXD
FXD
FXD
FXR Models
FXR
FXR
FXR
$469.99
T-5
‘Midnight
Series’
603826
603828
603830
603830
603825
603848
$469.99
603849
$469.99
603850
$469.99
Velocity
Chrome
603368
603370
603372
603372
603900
603826
$469.99
603368
$469.99
603827
$469.99
603369
$469.99
$469.99
603828
$469.99
603370
$469.99
603852
$469.99
603830
$469.99
603372
$469.99
603899
$469.99
603825
$469.99
603900
$469.99
66
66
70
70
70
65
603849
$469.99
603827
$469.99
603369
$469.99
603849
$469.99
603827
$469.99
603369
$469.99
603851
$469.99
603829
$469.99
603371
$469.99
603850
$469.99
603828
$469.99
603370
$469.99
603852
$469.99
603830
$469.99
603372
$469.99
603899
$469.99
603825
$469.99
603900
$469.99
1”
1 1/8”
1 1/2”
1 1/2”
66
70
70
65
603848
$469.99
603826
$469.99
603368
$469.99
603850
$469.99
603828
$469.99
603370
$469.99
603852
$469.99
603830
$469.99
603370
$469.99
603899
$469.99
603825
$469.99
603900
$469.99
1 1/8”
1 1/2”
1 1/2”
70
70
65
603850
$469.99
603828
$469.99
603370
$469.99
603852
$469.99
603830
$469.99
603372
$469.99
603899
$469.99
603825
$469.99
603900
$469.99
Width
1”
1 1/8”
1 1/2”
1 1/2”
1 1/2”
Tooth
66
70
70
70
65
1”
20 mm
1 1/8”
1 1/2”
1 1/2”
66
66
70
70
65
20 mm
20 mm
20 mm
1 1/8”
1 1/2”
1 1/2”
T-5
Chrome
603848
603850
603852
603852
603899
Price
$469.99
$469.99
$469.99
$469.99
Price
$469.99
$469.99
$469.99
$469.99
* These models require an additional pulley spacer (sold seperatly) for proper installation. Please add part# of the right hand column to the wheel order!
12
Price
$469.99
$469.99
$469.99
$469.99
$469.99
‘Meridian’
‘RevPro’
Velocity
‘Midnight
Series
603346
603348
603350
603350
603345
Price
Need
Pulley
Spacer
Price
$469.99
$469.99
$469.99
$469.99
$469.99
603346
$469.99
603750
$31.99
603347
$469.99
603749
$31.99
603348
$469.99
603350
$469.99
603345
$469.99
603347
$469.99
603749
$31.99
603347
$469.99
603750
$31.99
603349
$469.99
603348
$469.99
603350
$469.99
603345
$469.99
603346
$469.99
603348
$469.99
603350
603345
$469.99
603348
$469.99
603350
603345
$469.99
603751
$31.99
Meridian
RevPro
Chrome
Price
Chrome
$469.99 603732
603717
$469.99 603731
603716
$469.99 603730
603715
$359.99 603609
603639
$359.99 603608
603638
FLST Softail Models
$469.99 603732
603717
$469.99 603734
603719
$374.99 603607
603637
$359.99 603609
603639
$359.99 603608
603638
FXST Softail Models
$469.99 603734
603719
$469.99 603734
603719
$469.99 603733
603718
$374.99 603607
603637
$359.99 603609
603639
$359.99 603608
603638
Dyna Models
$469.99 603732
603717
$374.99 603607
603637
$359.99 603609
603639
$359.99 603608
603638
FXR Models
$374.99 603607
603637
$359.99 603609
603639
$359.99 603608
603638
Price
$359.99
RevPro
602783
602785
602787
602787
602898
$469.99
602783
$469.99
603750
$31.99
$469.99
602784
$469.99
603749
$31.99
$374.99
602785
$469.99
$359.99
602787
$469.99
$359.99
602898
$469.99
$469.99
602784
$469.99
603749
$31.99
$469.99
602784
$469.99
603750
$31.99
$469.99
602786
$469.99
$374.99
602785
$469.99
$359.99
602787
$469.99
$359.99
602898
$469.99
$469.99
602783
$469.99
603751
$31.99
$374.99
602785
$469.99
$359.99
602787
$469.99
$359.99
602898
$469.99
$374.99
602785
$469.99
$359.99
602787
$469.99
$359.99
602898
$469.99
$469.99
$469.99
$469.99
$359.99
Price
Need
Pulley
Spacer
Price
$469.99
$469.99
$469.99
$469.99
$469.99
13
19350
Rear Brake Drum Sprocket and Rivet Kits
Includes sprocket, rivets, and dowel pins.
Late Hydraulic Sprocket Kit
19350
Fits 67-72 FL and FX (replaces OEM 41470-67)��$35.99
19322
Rivet and dowel set for CC #19350 (1.020" x .190" rivets) ��$3.99
Early (Cast) Hydraulic Sprocket Kit
19514
Fits 62-66 FL and FLH models (replaces OEM 41470-62)��$38.99
19321
Rivet and dowel set for CC #19514 (.630 x .195 rivets)��$3.99
Mechanical Sprocket for Big Twin, Sportster Models
51-tooth sprocket with rivets and dowels. Fits 30-E58 OHV Big Twins
and 54-78 Sportster and K models.
19349
Black. Sprocket kit (replaces OEM 41470-30) ��$36.99
19320
Rivet and dowel set for CC #19349��$4.99
09772
Chrome-Plated Rear Sprockets with Cutouts
Match your 84-91 stock brake rotors with these brilliant chrome,
oval cutout sprockets. Features the rugged durability that Custom
Chrome sprockets are known for.
Fits 4-speed Big Twins from 73-85 and Sportster models
from 79-81.
09772
51 tooth (repl. OEM 41470-78)��$51.99
09771
49 tooth��$50.99
09770
48 tooth��$51.99
Fits FXR models (except FXRT and FXRP) with rear chain
drive from 82-85.
09773
48 tooth��$52.99
Fits Sportster models from 82-85.
09774
48 tooth (repl. OEM 41470-82)��$52.99
Fits Sportster models from 86-92.
09775
48 tooth (repl. OEM 41470-86)��$52.99
FXR
FX/XL
Rear Sprockets for Disc Brake Models
Top-quality rear sprockets in a variety of sizes. Available plain or
chrome-plated
Fit 4-Speed Big Twins 73-85,
and Sportster Models 79-81
Plain (offset 6mm)
25644
48 tooth�� $34.99
25639
49 tooth�� $34.99
15912
51 tooth (repl. OEMs
41470-73 and 4147078T)�� $35.99
Chrome
84372
25692
25693
25694
(offset 6mm)
47 tooth�� $49.99
48 tooth�� $49.99
49 tooth�� $49.99
51 tooth (repl. OEMs
41470-73 and 4147078T)�� $49.99
Chrome Sprockets for
Sportster Models from 82-85
(offset 2mm)
09783
47 tooth�� $51.99
25696
48 tooth (repl. OEM
41470-82T)�� $50.99
09784
49 tooth�� $50.99
14
Chrome Sprockets for
Sportster Models from 86-92
(Flat)
85134
46-tooth, chrome$49.99
09785
47 tooth (repl. OEM
41493-90T)�� $51.99
09786
48 tooth (repl. OEM
41470-86T)�� $49.99
09787
49 tooth (repl. OEM
41492-90T)�� $50.99
85138
51 tooth�� $49.99
Chrome Sprockets for FXR
Models (offset 12mm)
Fits 82-85 FXR models (except
FXRT, FXRP) with chain rear
drive.
25653
46 tooth�� $49.99
25654
47 tooth�� $49.99
25651
48 tooth (repl. OEM
40954-81)�� $49.99
25652
51 tooth (repl. OEM
40954-83)�� $49.99
Chrome-Plated Rear Sprockets
Features mirror chrome finish and the rugged durability that Custom
Chrome sprockets are known for. Fit 4-speed Big Twins 73-85 and
Sportster models 79-81.
09794
51 tooth��$51.99
09796
49 tooth��$51.99
09795
48 tooth��$50.99
XLO Chain
The XLO series chain is a
full 40% stronger than
standard chain and features permanent O-ring
lubrication that seals in
lubricant yet keeps out
contaminants. These top
of the line chains provide extra load-carrying
capability and have a
service life that averages four times that of a
standard chain. Requires
less maintenance than
standard chains and
due to less stretching,
fewer adjustments are
required.
Motor Factory Heavy Duty Drive Chains
We offer a complete line of quality drive chains to
meet your needs. If you are on a tight budget then we
recommend the Motor Factory Standard Drive Chains
that are made exclusively for Motor Factory. Or if you are
looking for a top of the line U.S. quality made chain then
you need Motor Factory Chains by Diamond. Diamond
Chain Company has been manufacturing chains for over
100 years. Diamond Chain Company was the first to
develop and manufact0ure the dual roller chain. With
over 100 years of innovation and manufacturing world
quality chains, your choice is Motor Factory Chains by
Diamond.
Heavy Duty
A high quality chain produced through a superior
manufacturing process. Excellent for most applications at
an economical price.
XDL Chain
Duralube chain with special oil impregnation process
for the pin bushing areas for extended life and better
lubrication than standard chain.
Size
530 x 100
530 x 102
530 x 104
530 x 106
530 x 110
530 x 112
530 x 120
Master link each
Master link 20 pk
Spares kit
Heavy
Duty
33001
33002
33003
33004
33005
33045
33014
33006
33025
33038
Price
XDL
Size
530 x 102
Standard
081102
530 x 104
n/a
530 x 106
081106
530 x 110
081110
530 x 112
081112
530 x 120
081120
Master link ea
081119
Master link 10 pk
081121
Spares kit
Price
$157.99
XLO Chrome
$164.99
$169.99
$172.99
$184.99
$6.99
$67.99
601342
601340
601341
n/a
601343
601344
601345
601346
601347
Price XLO Gold
Price
$195.99
n/a
$199.99
n/a
$199.99
n/a
$209.99
n/a
$214.99
n/a
$239.99 601353
$239.99
$7.99 601354
$7.99
$17.99
601355
$16.99
Spares Kits
Spares kits include one master link, lubricant, four o-rings and one connecting
link. See charts for applications and part numbers.
Price
$67.99
$69.99 601356
$98.99
$71.99 601357
$99.99
$72.99 601358
$102.99
$75.99 601359
$107.99
$77.99 601360
$108.99
$82.99 601361
$132.95
$2.49 601362
$2.99
$32.99
$17.49
Steel Rear Wheel Pulley and Sprocket
Spacer
Used on Big Twin models from 80-85 to properly space
the rear belt pulley to the wheel. Also used to space
the rear sprocket on chain applications. Measures .200"
thick. Sold each.
19722
Replaces OEM 40932-81��$10.49
Motor Factory Standard Drive Chains
These chains are designed, tested and manufactured exclusively for Motor
Factory to comply with the performance demands of Harley-Davidson
motorcycles. Engineered to exacting standards to guarantee long life and
smooth operation. Aligned and seated pitches eliminate initial stretch and early
wear. Tight precision assembly withstands high impacts and resists kinking.
Shaved plate holes eliminate tapering and hairline cracks, ensuring even
distribution of stress. Made with case hardened pins, wide side plates, and
premium bushings.
MTF O-Ring Chains
20,000 mile Limited Warranty against
defects in materials or workmanship.
17405
530 x 102�� $139.99
17406
530 x 104�� $142.99
17407
530 x 106�� $145.99
17408
530 x 110�� $151.99
17409
530 x 112�� $153.99
17410
530 x 120�� $164.99
MTF Heavy-Duty Chains
One Year Warranty against defects in
materials or workmanship.
17490
530 x 102�� $41.99
17491
530 x 104�� $42.99
17492
530 x 106�� $43.99
17495
530 x 110�� $44.99
17496
530 x 112�� $45.99
17497
530 x 120�� $48.99
Master Link
17411
O-Ring clip-style master link
(sold each)��$5.49
Master Links
Master links are sold each.
17498
Heavy-Duty clip-style master
link ��$2.99
Note: Because O-Ring chains are wider than
standard drive chains, it is imperative that chain
clearance to engine and frame components are
checked after installation.
15
Motion Pro Chain Press Tool
This tool will press on press fit side plates on
all 520-530 size drive chain including O-ring
types.
5008066 Complete tool��$52.99
5008067 Press kit only��$13.99
Master Link Installation Tool
Turns the chore of installing press-fit master
link plates into an easy job. Works equally
well on both standard and O-ring chains.
20274
Sold each��$21.99
Diamond Chain Breaker
Compression screw uses a heat-treated steel
tip to press out chain pins. It’s recommended
that pins be ground off flush to avoid damaging the chain bushing.
33037
Replaces OEM 94480-89T��$84.99
Motion Pro Jumbo Chain Tool
Kit
• Ultra heavy duty tool for breaking and
riveting roller chain
• Fits all 520, 525, 530 and 630 standard or
O-ring chains, plus industrial chains from
#50-#80
• Pushes the pin completely through the
chain link and rivets the same size chain
with the included rivet adapter
• Tool body may be mounted to a work
bench for production work, held in a vise
or by the handle
• When bolted to a surface, an air or electric wrench may be used to break chain
• Body bolt requires a 13⁄16" (21 mm)
wrench and extractor pin uses a 9⁄16" (14
mm) wrench or socket
5008135 Chain tool ��$139.99
5008935 Replacement pin ��$8.99
Motion Pro Masterlink Pliers
• Simplifies installation and removal of cliptype masterlinks
• One tip is shorter and notched to be
placed on the pin while the other is longer to easily push the clip
5008230 Sold each��$21.99
12310
Motion Pro Quad Stake Chain
Rivet Kit
Use in conjunction with the Motion Pro
Jumbo Chain Tool. This rivet kit will quad
stake chain, so it looks like a factory job.
5008142 Complete kit��$22.99
Chrome ‘Full Dress’ Chain
Guards
Motion Pro Chain Breaker Tool
A tough tool designed for shop use, also
makes a perfect tool kit item. Properly
used, the tool will break hundreds of chain
links without failure. Pushes chain link pin
completely through link. Handle folds to fit
small tool pouch. Replaceable pin is heat
treated and hardened for long life. For shop
use, tool may be used with an air or electric
impact wrench.
5008001 Fits all 420 to 630 chains ��$26.99
5008002 Replacement pin ��$3.99
16
Motion Pro Mini Chain Press
Tool
Tool box size and budget priced tool for the
installation of press-fit side plates. Very easy
to use, and easily fits into tool kit. Hex key
wrench is included.
5008070 Fits all 520 to 530 chains ��$9.99
Chrome reproductions of classic ‘Dresser’
rear chain guards for 4-speed FL models
from 63-84. Bolts directly onto 4-speed,
chain drive models (except Softail models)
71-85. Accurate to the original with heavygauge construction, fully rolled edges,
inspection cover relief and front mount
bushing.
12310
Standard chain guard (repl. OEM
60302-63T)��$55.99
25548
Rubber grommet with a steel insert
for use in mounting Fat Bob tanks.
Helps to isolate the tanks from
vibration. Pack of 10 (repl. OEM
11411)��$6.49
Chain Guards for Hardtails and Rigid Frames
With mounting tabs for quick bolt-up adaptation to most hardtails
and custom rigid frames.
19386
Fits rigid framed Big Twins ��$29.99
650327
650325
Black Belt Guards for 5-Speed Sportster Models
Tired of chrome? Want to make your own dark custom? These
black belt guards are a start. Combine them with many other
blacked out parts to finish the job.
650325 Black belt guard 91-99 XL ��$47.99
650326 Black drilled belt guard 91-99 XL��$47.99
650327 Black drilled belt guard 04-12 XL��$55.99
650328 Black belt guard 04-12 XL ��$55.99
605601
605602
605600
28242
12639
605603
Chrome or Black Belt Guards for 5-Speed Sportster Models
Made of heavy-gauge stamped steel, these guards keep your belt clean and your bike looking good. Fits all 5-speed Sportster models from
91-12.
605601 Chrome upper Guard XL 04-12�� $65.99
605600 Chrome upper guard XL 00-03�� $57.99
12639
Chrome upper guard XL 91-99�� $45.99
28242
Chrome lower guard XL 91-03�� $38.99
605603 Chrome lower guard BigTwin 06-12�� $55.99
605602 Lower guard BigTwin 00-05 �� $55.99
17
12315
632257
12309
12306
12311
12318
632258
12317
632259
Chrome Chain Guards for Swingarm Models
Stock replacement and custom chain guards are precisely engineered
to bolt-on in minutes.
For FL and FX Models
12306
Custom chain guard for swingarm 4-speed Big Twins (except
Softail models) from 73-85 ��$36.99
12309
Stock replacement for 4-speed FX models (except Softail models) from 73-85 (repl. OEM 60302-73T)��$42.99
12317
Stock replacement chain guard for Softail models from 84-85
(repl. OEM 60639-84) ��$52.99
For Sportster Models
12311
Stock replacement chain guard for 83-87 Sportster models
except 87 Hugger models (replaces OEMs 60375-83, 91777-85)
Universal Chainguards
These chrome plated universal fit chainguards come with mounting
brackets. Available for left or right hand drive fitment as well as a
chainguard made specifically for use with the Paughco rigid Sportster
frames we offer. Made in USA by Paughco.
632257 Universal chain guard w/brackets. Left side ��$60.99
632258 Universal chain guard w/brackets. Right side��$60.99
632259 Chain guard for use with Paughco XL rigid frames ��$43.99
��$43.99
12318
Stock replacement chain guard for 88-90 Sportster models and
87 Hugger models (replaces OEMs 60365-87, 60405-87)��$49.99
For FXR Models
12315
Stock replacement chain guard for 82-84 FXR models (except
FXRT) and 86 FXR Super Glide models (replaces OEMs 60640-86,
60607-81A) ��$41.99
These fine Jammer products are found in
the 2013 Custom Chrome Catalog
18
General Warnings
Motorcycle riding is a dangerous activity. The only way to be sure to avoid
injury is not to ride! Even if you use the finest and best-maintained equipment,
wear a helmet and protective clothing, and take all possible precautions, it
is not possible to avoid every risk. Motorcycle accidents frequently result in
serious injury, including death. Please do not operate a motorcycle or other
motor vehicle when you are tired or under the influence of alcohol or drugs,
or when your perception is impaired for any other reason. At all times, please
wear a helmet, ride carefully and within posted speed limits, and obey all other
traffic regulations and instructions from law enforcement personnel.
Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson® and
other brands. If you do not have the necessary experience and skill, please have
a qualified mechanic install any new or replacement part on your motorcycle.
The failure to install properly and test any new or replacement component
could adversely affect your motorcycle’s operation and result in an accident,
including a fatal accident.
Federal and state laws and regulations impose restrictions on modifying the
engine, ignition, exhaust and other components of a motorcycle intended
for on-road use. In addition, these laws and regulations impose requirements
on windshields, brake components, lighting, and other equipment on your
motorcycle. Accordingly, certain parts in this catalog are for competition or
display purposes only. In general, those parts are indicated by a “Competition”
mark: a checkered flag in a yellow oval.
If you are a retail customer, you are responsible to know the laws and
regulations that govern the modification of your motorcycle. Custom Chrome is
not responsible if you modify your motorcycle or any component in violation of
law. If you have any questions regarding a particular component, please consult
your dealer or a qualified motorcycle mechanic.
The following is additional information relating to components for sale in
various sections of this catalog. This information is not exclusive – if you have
any questions regarding the installation or use of any component, please
contact your dealer, a qualified mechanic, or Custom Chrome’s customer
service department.
© COPYRIGHT 1982-2013 BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC.
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED,
STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY
ANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR
OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER.
Any “add-on” or “modified” emissions-related parts contained in this brochure that are subject to anti-tampering laws may or may not have been evaluated and/or
exempted by CARB. As a distributor, Custom Chrome makes no representation or warranty with respect to whether the emissions-related parts in this brochure are
legal for sale, installation or use in any state unless the part is installed in a vehicle used only for closed-course competition. Consult with the manufacturer as to any
such exemptions before purchasing any add-on or modified emissions-related parts for non-competition use in California or elsewhere.
19
World’s Finest Products For Harley-Davidsons
Service
Maintenance
Customization Repair
Performance
18225 Serene Drive | Suite 150 | Morgan Hill, CA 95037 | Printed in USA
20

Driveline - Custom Chrome

Transcription

Similar documents

Tsubaki SMART TOOTH

August1

Driveline - Custom Chrome

what`s the going rate for a tooth in america?

Teeth and Nothing But… - FamilyDentistsInGurnee.com

Flexite ad Aug06 - PRO-ART Dental Laboratory Toronto

Cracked Tooth Syndrome

KlipHanger BARS FOR 08

THE saber tooth tiger is a very deadly animal. FOR example,the