CNC Turning • Machine Capabilities o Daewoo Puma 300M With

CNC Turning
•
Machine Capabilities
o
Daewoo Puma 300M With Live Tooling (“C” Axis)
Max Turning Diameter 300mm
Max Turning Length 750mm
Ability Work Directly With .DXF Files Direct with Our CAD/CAM Software
•
Roll Tooling Manufacture
Billet Preparation, Roll Profiling Soft Turning (Internal and External), Roll Profiling Hard Turning
(Internal and External), Drilling & Tapping, Keyway
•
Rolling Mill Shaft Manufacture
Shafts Prepared With or Without Keyways to Your Specification
•
Batch Production Work
•
Marine & Gas Products
Cold Rolled Section Tooling Design
•
Using Copra ®, Bespoke Cold Rolled Section Tool Design Software, we offer the complete roll tool
design solution, including initial product development, analysis and on-site commissioning when
required.
Cold Roll Forming
•
Machine Capabilities
o
12 Pass 3” Shaft Yoda Machine
o
Cut To Length Tolerances +/-1.0
o
Product Packaged To Your Specification
Press Work
Our press shop utilises conventional power presses ranging from 10 to 100 ton capacities, facilitating a
range of work from the prototype, small batch run through to production volumes. Facilities for
assembly provide our customers with a full service whereby they can receive pre assembled products if
required.
•
Machine Capabilities
o
30 Ton Bentley Press
460mm x 700mm Bed Size with Variable Stroke
o
30 Ton Sweeney Press
560mm x 660mmBed Size with Variable Stroke
o
30 Ton Sweeney Press
570mm x 760mm Bed Size with Variable Stroke
o
50 Ton HME Press
520mm x 730mm Bed Size with Variable Stroke
o
50 Ton HME Press
640mm x 800mm Bed Size with Variable Stroke
o
70 Ton HME Press
530mm x 810mm Bed Size with Variable Stroke
o
70 Ton Butterley Press
600mm x 810mm Bed Size with Variable Stroke
o
75 Ton HME Press
600mm x 900mm Bed Size with Variable Stroke
o
100 Ton HME Press
800mm x 1000mm Bed Size with Variable Stroke
o
Coil Holder and Straightner to 1.5 Ton
Tube Bending
•
For Bathroom and Leisure Industries
Tool Making
•
Medium Size Single Operation Tools
•
Progression Tooling
•
Jigs & Fixtures
•
Rolling Mill Pre & Post Pierce Tooling (With Gags As Required)
•
Rolling Mill Single & Double Shear Tool
Lightweight Steel Framing
In recent years the use of light gauge steel frame construction has become firmly established in the UK and is
increasingly used in preference to timber, masonry and hot rolled steel structures for all types of wall and
flooring applications.
Helping Hand Brackets and Cleats
•
60mm to 400mm long
•
Mild Steel (galvanised after manufacture or painted red oxide primer).
•
Brackets and Cleats up to 10mm thick with holes or slots
•
Various extruded
Extrusions
angle
T
sections
Aluminium Fabrications
•
Aluminium Panels
•
Architectural Flashings
•
Architectural Powder Coated Aluminium
•
Anodised Aluminium
Punched Profiles
and
Z
sections
also
available
in
6
metre
lengths
•
Galvanised and Aluminium Trims from 0.7mm to 2.0mm thickness up to 12 metres in length and trims
up to 4 meters in length
•
Stainless Steel 0.7mm to 10mm thickness up to 4 metres in length
•
Helping Hand Brackets and Cleats up to 10mm thick with holes or slots, various extruded angle T
sections and Z sections also available in 6 metre lengths