TCX625HD Heavy-Duty Tire Changer

Comments

Transcription

TCX625HD Heavy-Duty Tire Changer
TCX625HD Heavy-Duty Tire Changer
Optimized for over-the-road truck tires
Key features at a glance
TCX625HD shown
Tulip-Style Clamp
Bead-Breaking Rollers
✔✔ Clamps quickly and easily
✔✔ Quickly and easily break
✔✔ No damage to the wheel
tire beads
✔✔ Drop roller saves time
✔✔ No wheel damage
Hydraulic-Powered Carriage
All-In-One Controls
✔✔ Eases wheel clamp
✔✔ Houses all user operations
positioning
✔✔ High speed for fast service
✔✔ Pivots to allow flexibility
Size Variety
Reduce Risk
✔✔ Service standard truck tires
✔✔ No lifting tires
as well as super-singles
✔✔ Steel or aluminum rims
easily serviced
✔✔ No tire load
✔✔ No hammers
Fast & Easy demounting...
✔✔ Roll the wheel onto the carriage
and move the carriage inward
✔✔ Loosen the beads using the rollers and lube.
✔✔ No hammers needed!
✔✔ Quickly slide the carriage and spin the tire,
rolling both beads off of the rim. It’s that easy.
Demounting takes as little as 55 seconds.
...and mounting.
✔✔ Easy mounting shown
using optional lever
✔✔ Use standard aluminum or steel rim clamps to
assist mounting.
✔✔ For many standard tires, super-fast double
bead mounting is possible.
Mounting takes as little as 30 seconds.
Safety comes standard
NO HAMMERS
NO BARS
NO LIFTING
The TCX625HD functions close to the
ground to keep heavy tires at a safe height.
Effortless clamping design
The innovative tulip-style clamp expands and contracts quickly for fast mounting of wheels of all sizes.
Makes match-mounting easy!
When combined with the ForceMatch® HD wheel balancer
(right), the TCX625HD provides match-mounting capability
for achieving the smoothest possible ride.
Optional HammerHead ®, printer and shelf shown.
Provides fast service of specialty wheel assemblies
Use the standard hook attachment to mount and demount tubed
or sharp edged wheels, or other more difficult assemblies.
Specifications
Max 52 in.
Min. rim-center hole diameter:
Max. rim diameter:
(132.08 mm)
4.8 in. (122 mm)
14.5 - 24.5 in. (368 - 622 mm)
Wheel assembly
40 in.
Max. diameter:
(101.6 mm)
55 in. (1,397 mm)
Max. width:
27 in. (686 mm)
Max. weight
1,545 lbs. (700 kg)
Operating voltage:
208 - 230V, 1ph, 60Hz, 20A
Rotation speed:
86 in.
28 in.
(2184.4 mm) front to rear total
(165.1 mm)
7 rpm CW & CCW
Torque:
Max 65 in.
1,250 ft-lbs.
Shipping weight:
(165.1 mm) with pivoting controls
1,168 lbs. (530 kg)
Ordering Information:
The TCX625HD is designed to service truck-type tires with angled
bead seats. Passenger car and light-truck tires cannot be serviced
on this changer even if they are in the listed clamping range.
TCX625HD – 220V (Nominal), 1 Phase
TCX625PHD - TCX625 Plus, includes mounting lever, 2 ramps, aluminum jaw covers and pocket v cover.
Accessories
A
B
C
D
E
F
A. Aluminum Wheel Clamp D. Hook & Hook Pin
B. Steel Wheel Clamp
E. Roller
C. Tire Paste & Brush
F. Lever
A
Mounting Lever
RP11-8-12100177
A.Spare Inserts
for lever (5)
RP11-8-12100178
Speeds outside bead
mounting. Includes 3 inserts.
Single Ramp
RP11-8-12100040
Pocket V Cover
RP11-8-12100039
Ease rolling tire onto changer
(one included)
Dress up cover for carriage
Centerless adaptors
RP11-8-12100176
Aluminum jaw covers
RP11-801254494
Grips inboard edge
centerless wheels
Prevent center-bore damage on
aluminum wheels
Because of continuing technological advancements, specifications,
models and options are subject to change without notice.
0316EAP4M.50
ForceMatch and HammerHead are registered trademarks of Hunter Engineering Company.
Copyright © 2016, Hunter Engineering Company
w w w. h u n t e r. c o m
Form 6837-T, 03/16
Supersedes 6837-T, 09/15

Similar documents

technical service bulletin

technical service bulletin The ROYAL R IDE is a new tool that has been made available to the aftermarket only after extensive testing both in the field and by the automobile manufacturers. It will solve the "Smooth Road" vib...

More information