29892 VUR 18DC-14DC Instr. Sheet4_bck

Vu Ryte
VUR 18DC and VUR 14DC
(Easel 18” wide)
(Easel 14” wide)
Your Vu Ryte has been uniquely designed to meet all of your support needs!!!.
Your Vu Ryte can be in the VERTICAL position between your monitor and keyboard...
Or, Y our Vu Ryte can be HORIZONTAL to your monitor... Or anywhere in your life!
VERTICAL
(Between the monitor and keyboard)
Supports all kinds of stuff.
HORIZONTAL
(Adjacent to monitor... in kitchens...
anywhere!!!)
WAIT A MINUTE... There’s More...
Check out these features of the patented Vu Ryte design:
✔ ANGLE ADJUSTABILITY....
✔ HEIGHT ADJUSTABILITY....
✔ AVAILABLE IN EASELS 14" AND 18" WIDE
✔ ADJUSTABLE LINEGUIDE AND
DOCUMENT CLIP....
www.vu-ryte.com
Wow! I need a Vu-Ryte!
Installation Instructions - Vu Ryte Model VUR 18DC and VUR14DC
Let’s begin by describing the components to your Vu-Ryte
Model VUR 18DC or Model VUR 14DC.
Additional Contents:
Plastic Bag Containing: 4 Rubber Bumpers;
2 Easel Screws with Nuts
Also: Line Guide Tracer
Note: The Clip attached on the bottom lip will
slide horizontally to any position on the easel.
If clip detaches, it may be reattached by placing
the clip groove over the easel lip and “snapping”
or “rolling” it on.
Let’s Get Started... This Won’t Be Difficult...we promise!!
A. Let’s begin by turning the “Base” over and applying the 4 Rubber
Bumpers to the bottom side of Base walls. We recommend that you
attach them at the identified location. See “Step A”. It is very
important that these bumpers rest on the work surface.
Step A
B. Taking the Easel, you will note the Vertical Adjustment Slots in the
Easel. Line up with slots with the holes in Face of the Base. Insert
screws through the front of the Base and through the Face of the
base. Tighten screws from back side of Easel. See “Step B.” This
would also be a good time to slide the clip to the desired location.
Step B
C. Note the Angle Adjustment Screws... by loosening and tightening
them you can adjust the angle of the Easel... Pretty cool,huh?? If
desired, this might be a good time to readjust the height of the Easel.
Step C
D. Place slot in LINE GUIDE TRACER over the protruding portion of the LINEGUIDE SLIDE. As you press down, you
will hear a “notching” sound. This allows you to maintain a straight line for different depths of documents. To move
TRACER, grip end and slide up or down.
Copyright© Vu Ryte, Inc. 2015 - All Rights Reserved Patented. All of our Products are Proudly Designed and Made in the U.S.A. Customer Service: 903-593-4666
This product is sold on an “as it stands” and “with all faults” basis. Vu Ryte, Inc. disclaims any implied warranties with respect to the product and makes no warranty of merchantability
or fitness for any express or particular purpose. Vu Ryte, Inc. shall not be liable for consequential or incidental damages occurring from any product defect.