Document 6468678

Transcription

Document 6468678
WELDER / PIPEFITTER TOOLS
A. & B. TACK-IT From A-LINE
• Step 1: Select pipe size.
• Step 2: Insert pins in required pipe size holes & hand tighten.
• Step 3: Position tool against pipe with upward pressure to
engage “Hi-Lo” pins.
• Step 4: Align fitting on opposite side of tool, shutting it to the
spacer and resting it on the “Hi-Lo” pins.
• Step 5: Tack It.
• Step 6: Slide tool out, opposite to the tack and finish as usual.
• View Demo Video Online at www.thegangbox.com
A
Item #
344332
34418
348332
34818
Desc.
Small 3/32” gap
Small 1/8” gap
Large 3/32” gap
Large 1/8” gap
Price
$62.95
$62.95
$64.95
$64.95
B
C
D
C. ERGO SMALL BORE SPACE-IT WEDGE
#34102 . . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
• 3/4" wide x 8" long , .212" thick • 1 ½" grip & striking surface
• Double taper tip • Bright orange & high visibility
D. ERGO BIG BORE SPACE-IT WEDGE
#34101 . . . . . . . . . . . . . . . . . . . . . . . . . .$22.00
E
ON
SALE!
• 1½" wide x 8" & .212" thick • Double taper tip
• Bright orange & high visibility
SALE PRICE
E. SPACE-IT HOLSTER
#34103
Was $22.00...........................On Sale for $19.95
•
•
•
•
•
1
Safest way to carry your Space-It wedges
'No drop' safety flap belt loop fits up to 3" wide belts
Exceptional quality Top grain tanned leather
Holds 2 Space-It wedges (any combination)
Available Colors: Natural, Tan, Walnut
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
JACKETS • SLEEVES • HOODS
A. SATEEN JACKET
•
•
•
•
•
Five insulated snaps with spatter guard front closure.
Flame retardant sateen body for cool protection.
Leather sleeves for heat, flame and abrasion resistance.
Color=Blue Sateen with Tan Leather Sleeves
Resistance=Abrasion, Heat • Usage=Welding
Item #
101-1201-1-M
101-1201-L
101-1201-XL
101-1201-XXL
101-1201-XXXL
Disc.
Medium
Large
X Large
XX Large
XXX Large
A
Price
$46.00
$46.00
$46.00
$52.00
$55.00
B
B. 30” LEATHER WELDING COAT
• Made from premium side split cowhide.
• Special tanning makes the leather heat resistant, soft, pliable, and
yet very durable.
• Made with comfortable shirt collars and sleeve snaps for individual
adjustment, also has inside pockets.
• MADE WITH 67% MORE KEVLAR!
Item #
100-Q-1-M
100-Q-1-L
100-Q-1-XL
100-Q-1-XXL
100-Q-1-XXXL
Desc.
Medium
Large
X-Large
XX-Large
XXX-Large
Price
$60.00
$60.00
$60.00
$64.00
$68.00
C. LEATHER CAPE SLEEVES
•
•
•
•
•
C
Color: Brown
Split Cowhide cape Sleeves
Extra long front for maximum protection
Adjustable black snaps at wrist
4 Sizes available
Item #
650-L
650-XL
650-XXL
650-XXXL
Desc.
Large
X-Large
XX-Large
XXX-Large
Price
$68.00
$68.00
$75.00
$80.00
D
D. LEATHER HELMET-SOCK HOOD . . . . . . . . .$85.00
#750-LH
• Color: Russet • Split Cowhide • Side split leather
• Screen vents on top of helmet • Adjustable headgear
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
2
CONSTRUCTION CALCULATORS
Prices subject to change without notice
A. PIPE TRADES PRO™ #4095 . . . . . . . . . . .$89.95
Advanced Pipe Trades Math Calculator Calculates:
• Right Angles, Offsets, and Complex Rolling Offsets • Fitting
Angles, Bends, Slopes Percent Grades, Drops • Parallel Pipe
Cutbacks • Feet-Inch-Fractions and Trigonometry • Pipe Areas,
Fill Weights • Flow Rates, Velocity, Force, Volumes • Pressure
Loss for any Pipe Size, Type or Distance • Complete Building,
Plumbing and Metric Unit Conversions
Built-in Pipe Data • Choose a Pipe Material and Pipe Type and
enter Size and get Diameters, Wall Thickness, Filled Weight per
Foot, Internal Area. • Seven different Pipe Materials: Steel,
Stainless Steel, Brass, Aluminum, Cast Iron, Plastic, Copper.
A
B
B. ELECTRICALC® PRO
C
#5070 ................$99.95
Electrical Code Calculator, Compliant with 2005, 2002, 1999
and 1996 NEC®:
• Wire Sizes • Integrated Voltage Drop • Conduit Sizing
• Motor Full-Load Amps • Fuse & Breaker Sizes Service /
Equipment Grounding Conductor Sizes • Enter BTU to find
Kilowatts or Kilowatts per Hour to find BTU • Parallel
Resistance • NEC® Table Number displayed when performing
Wire Size calculations • Ohm’s Law Calculations – enter any
two values to solve for the third • Circular MILS wire sizes
C. PLUMBINGCALC® PRO
#4094 .............$69.95
Flow and Dimensional Math Calculator:
• Calculate Volumetric Flow Rates, Pressure, Force and Area.
• Select Pipe Material and Type, then enter Pipe Size and instantly display O.D., I.D., wall thickness, internal area, and weight
per foot. • Solve right-angle math with built-in Offset, Run and
Travel functions. • Get all these calculations and more on the
jobsite or in the office.
D
D. CONCRETECALC® PRO
#4225 .............$69.95
Advanced Yard, Feet-Inch-Fraction Concrete Construction-Math
Calculator:
• Work in Yards, Feet-Inch-Fractions, Area, Volume, Weight and
Loads • Automatic Square-ups and Drops • Rebar solutions
including Inset and Weight • Complete Stair Layouts; set Riser
Height & Tread Width • Equal sided Polygons • Blocks and
Footings • Circles: Arc, Column, Cone, Much More!
E. MATERIAL ESTIMATOR™
E
3
#4019 .........$39.95
Materials Estimating Calculator:
• Work in Yards, Feet, Inches, Fractions and Meters & Square &
Cubic formats. No need to convert to decimals. • Convert
between all standard building math dimensions. • Define &
store values for materials like Custom Tile, Board Width, Bags
of Concrete, Paint Coverage & more. • Calculate Board Feet and
Cost per Unit. • Quick Linear, Area & Volume answers.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
A. ULTRA MAG G3 TORPEDO LEVEL #300 . .$39.95
LASER LEVELS
A
• Neodymium Rare Earth Magnets
• Quickest, strongest holding professional torpedo level
• Available in Blue, Platinum & Red
B
B. ULTRA MINI-MAG G3 NO-DOG
TORPEDO LEVEL #303 . . . . . . . . . . . . .$36.95
• Neodymium Rare Earth Magnets • 30°, 0°, and 90° vial ports
• Thumb screw to tie onto the cut end of pipe for no- dog use
• Available in Blue, Platinum & Red
C. 880 G3 LASER LEVEL #327 . . . . . . . . . . .$98.95
C
• Allows use of all lenses with high power laser
• 4 vial G3 body
• Available in Black, Blue, Platinum, Red
D. EV 600 LASER LEVEL w/CASE #0335M.....$65.95
• Compact, Light Weight and Ergonomically Designed • Allows
use of ALL Checkpoint Lenses • Rare Earth Magnets
• Available in Blue & Red
• Discontinued Item, Supplies Limited
D
E. PROFESSIONAL U6 SERIES LEVELS W/MAGNETS
• CNC-Machined Billet Aluminum • Oversized Acrylic Vial
• Rare Earth Magnets • Lifetime Limited Warranty on Body
• Super-deep V-Groove System • Readings at 0°, 22.5°, 30°,
45°, 60° & 90° • 45 min./arc reading bubble vial
• Belt case • Compact "2.5 x 2"
• Available Colors: Black, Blue, Platinum & Red
E
• U6 V GROOVE LEVEL WITH MAGNETS #U6-G610.. $54.95
• U6 FLAT LEVEL WITH MAGNETS #U6-F600..........$38.95
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
4
LASER LEVELS AND CASES
A. SPECIAL EDITION EV-600 LASER LEVELS
Was $99.95 - On Sale for . . . . . . . . . . .$49.95
A
Supplies Limited - Once They're Gone...They're Gone!
• CNC 6061-T6 machined aluminum body • Precision alignment,
1/4" @ 100' • 45 min arch vials • Accurate from all planes
• Laser lasts up to 10k hours • Lifetime warranty on body
• 8 Limited Edition Finishes - Each sold separately
•
•
•
•
•
•
•
•
#1390
B
#392
Flame-0561
Copper Carbon-0562
Silver Carbon-0563
Monarch-0565
Psychedelic-0566
Combat Camo-0567
Desert Camo-0568
Dark Wood-0564
B. CARRYING CASES
• ULTRA MAG CASE #1390 (Fits 300 Series) . . . . . . . .$9.95
Designed to fit all generations of the Ultra Mag Torpedo Level.
Constructed of black, double layered ballistic nylon. Heavy duty
stitching for durability and fitted for easy removal and a snug fit.
Fits standard belts up to 2¾”. Level not included.
• 660 ARMOR #392 (Fits 660 Ergo) . . . . . . . . . . . . . . .$9.95
• 880 ARMOR #395 (Fits any 880 Series) . . . . . . . . .$12.95
Mag Armor Case is designed to fit any 880 & 660 series torpedo
level. Heavy duty holster fits 2" - 6" tool belts. Constructed of
black, double layered ballistic nylon with laminated high density
foam.
#395
#398
• PRESENTATION #398 . . . . . . . . . . . . . . . . . . . . . .$15.95
For the 880 series laser levels. Case has a steel shell with
rugged leather-like exterior, vacuum formed and lined interior to
fit an individual 880 series unit. Fits series 880, 880 G-3 or
880 Square.
5
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
CURV-O-MARK® by
PIPEFITTER / WELDER TOOLS CONTOUR
Prices subject to change without notice
A. PRO-MAG LEVEL #430-14777 . . . . . . . . . . . . . . .$75.00
• Stock # 8 • A lightweight, easy to use tool for determining angles
• 2 cast-in 25-pound pull magnets hold securely to any steel
surface. • Has a 360° adjustable DSL with two 90° quadrants
A
graduated in 2½° increments.
B. FITTER-WELDER PROTRACTOR #430-14778 . . . . .$80.00
• Light Weight Aluminum • This 90-degree protractor has a match-
ing locking lever to set and hold the tool at the desired angle. It is
equipped with a 5/8 in. by 10 in. tapered arm to complete finding
of angles or desired bends, or to determine any portions of elbows.
• Mounted in a 3/4-in. wide frame with a 3/8-in. by 6-in. cast-in rod.
• It comes with a 25-pound pull magnetic base for holding the protractor frame in position. The unit can be used manually or with a
magnetic base.
B
C. UNIVERSAL LEVEL #430-14796 . . . . . . . . . . . . . .$125.00
• Stock # 33
• 360º adjustable protractor dial bubble (DSL) of laterals to a
precise degree. • Designed primarily for pipefitting applications, a
C
valuable tool for any craft required to use a level or a plumb bob
for structural iron workers • 2 cast-in 25 pound pull magnets
D. RADIUS MARKERS
•
•
•
•
MINI - Up to 8 inch Radius
SMALL - Up to 20 Inch Radius
STANDARD - Up to 24 Inch Radius
JUMBO - Up to 40 Inch Radius
Item #
430-14780
430-14781
430-14782
430-14783
D
Desc.
Stock #1208-Mini
Stock #1220-Small
Stock #1224-Standard
Stock #1340 Jumbo
Price
$24.00
$34.00
$36.00
$60.00
E
E. WRAP-A-ROUNDS
Item #
430-14752
430-14753
430-14756
Size/Desc.
Medium
Large
Ex. Large
Pipe Dia.
3 - 6”
3 -10”
6 -16”
Width/Lgth
3.88” x 4’
3.88” x 6’
5.00” x 9’
Price
$16.00
$17.00
$30.00
F. STANDARD CENTERING HEAD #430-14775 . . . . . .$80.00
• Stock # 6
• Centering Heads aid in the setting of centerlines establishing angles
and marks for butt-ins, locating points inside pipes and tanks,
laying out keyways and measuring declivity.
• The standard model is used on pipe ½ inch diameter and larger.
It has a 4”, Y-type head and is fitted with an adjustable dial bubble
protractor (DSL) and a manually operated hardened centering pin.
F
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
6
CURV-O-MARK® by
PIPEFITTER / WELDER TOOLS
CONTOUR
A
A. JUMBO CENTERING HEAD #430-14776 . . . . . . . .$125.00
•
•
Stock # 7
The Jumbo Centering Head is for pipe 1” diameter and up. It has an
8” Y-type head and a DSL. A spring-loaded hardened centering pin
eliminates the need for a hammer. Just make the alignment and
press the trigger.
B. DIAL-ANGLE FLANGE LEVEL #430-14786 . . . . . . . .$99.00
Stock # 20 • Can be used as a dial degree utility level or with
attachments for two-holing flange alignment.
• Made of cast aluminum with a protective housing containing an
adjustable DSL.
• One of the nut and bolt units is stationary, while the other slides up
to 5½“ along a slot in the level to accommodate various flange bolt
hole spacings from 2 to 5½ inches.
•
B
C
C. MAGNETIC BURNING GUIDE #430-14791 . . . . . . . . $85.00
Stock # 28 • Designed for use with a burning torch or as a straight
edge • Cast of strong durable material to withstand heat and spatter.
• The base has three 30-pound pull cast-in magnets
• A 24 inch blade on a raised plane is standard.
•
D. CONTOUR MARKER #430-14771 . . . . . . . . . . . . .$155.00
Stock # 1 • Compact & time saving used to lay out pipe and structural steel joints. Laterals at any angle, tees, wyes, crosses, elbows,
etc. • Can be used to lay out pipe from 1½ to 18“ diameter or
structural steel members up to 18”.
• The Contour Marker consists of an X-shaped frame, calibrated
protractor and a triple-jointed marking arm and holder.
• The holder accepts a soapstone crayon (included), felt pen or pencil.
•
D
E PIPE FLANGE ALIGNER #430-14779 . . . . . . . . . . .$110.00
E
•
•
•
•
7
Stock # 10
Fast, accurate, self determining flange aligning tool.
The aligner inserts easily inside pipe diameter and automatically
aligns with the pipe axis.
Quickly adjustable for all types of flanges or pipe sizes ranging
from 3 to 12” diameter.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
CURV-O-MARK® by
Prices subject to change without notice
PIPEFITTER / WELDER TOOLS CONTOUR
A
A. JUMBO CONTOUR MARKER #430-14773 . .$345.00
• Stock # 4
• For use in the layout of large diameter pipe from 8 to 48“
• With its Structural Adapter, it can be used in the layout of
extremely large structural steel members up to 48” wide.
• Comes with a durable web strap that helps hold the unit in place.
• A built-up adjustable dial bubble protractor ensures
accurate centerline location.
• A soapstone crayon is included.
B. FLANGE ALIGNER BASE #430-14795 . . . . .$120.00
B
•
•
•
•
Stock # 32
Holds a square in the needed position
Notched at both ends for ease in aligning on center line of pipe
Two 25-pound pull, cast-in magnets for holding either a
flat horizontal or vertical position.
• The Base accepts either leg of a standard or combo square
and will work pipe diameters from 1” up, requiring only the
extension of the legs of the square
being used to accommodate larger diameters.
• Made from lightweight, durable aluminum. (Square not
included.)
C
C. CURV-O-MARK REPLACEMENT PARTS
• DIAL SET LEVEL #430-14797
• CENTERING PIN #430-14798
#0002
#14797
. . . . . . . . . .$30.00
. . . . . . . . . .$18.00
D. PIPEFITTERS KIT #301-4807
Was $310.00 - On Sale for . . . . . . . . . . .$275.00
Combines all the top selling layout & measuring tools into one
convenient, lockable carrying case. (For Precision Pipe Markings
and Layouts)
Comes complete with:
• #1 Contour Marker
• #7 Centering Head
• #8 Pro Mag Level
• Standard Radius Marker
• Square Soap Stone and Holder
• Heavy Duty Locking Metal Case (17⅝ x 12.5 x 4" Deep)
D
If purchased separately the Kit items would cost $420.00
Not including case!
Contour Marker #0721-0000 - $155
Jumbo Centering #0721-0006 - $125
Pro-Mag Level #0721-0007 - $75
Radius Marker Jumbo #0721-0013 - $60
Flat Soapstone Holder #0721-0024 - $5
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
8
CRAFTSMEN BELT BUCKLES
Prices subject to change without notice
CRAFTSMEN BELT BUCKLES
• Buckle Sizes: Buckles are 3 1/4" wide by 2 1/2" tall -- give or take a quarter inch or so.
• Made of Metal or Pewter • Buckles with color are brightly colored enamel • Buckles fit a 1 1/2" belt.
CARPENTER BUCKLES
#SYA6 • $19.95
CARPENTER BUCKLE
9
#SYA6E • $19.95
#851P • $19.95
ELECTRICIAN BUCKLES
#0256E • $19.95
#2086PC • $19.95
#2086P • $19.95
#4560PC • $19.95
#SYE6 • $19.95
#SYZ40 • $19.95
#855PC • $19.95
#SYE6E • $19.95
#SYZ40E • $19.95
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
CRAFTSMEN BELT BUCKLES
Prices subject to change without notice
ELECTRICIAN BUCKLES
#4623Y • $19.95
HVAC BUCKLE
#4623P • $19.95
#SYZ8 • $19.95
HEAVY EQUIPMENT OPERATOR BUCKLES
#1804PC • $19.95
#SYM80E • $19.95
IRONWORKER BUCKLES
#1819PC • $19.95
MASON BUCKLES
#SYK89 • $19.95
MILLWRIGHT BUCKLE
#BCJ1717P • $19.95
#CJ1617E • $19.95
#D80E • $19.95
PAINTER BUCKLE
#BCJ1717FP • $19.95
#V50E • $19.95
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
10
CRAFTSMEN BELT BUCKLES
PIPEFITTER BUCKLES
#SYF8E • $19.95
PIPEFITTER BUCKLE
#1977P • $19.95
SHEET METAL BUCKLE
#SYQ92 • $19.95
#SYF8 • $19.95
#1977PC • $19.95
PLUMBER BUCKLES
#SYF6 • $19.95
#SYF6E • $19.95
WELDER BUCKLES
#1523E • $19.95
#SYC80E • $19.95
#1523 • $19.95
#SYC80 • $19.95
WELDER BUCKLES
#1803PC • $19.95
11
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
CONSTRUCTION LEVELS
A. EM81 SERIES HEAVY DUTY MAGNETIC LEVELS
• True Blue™ vials are accurate to within 0.0005” per inch in all 10 level and plumb positions
• Super strong anodized I-beam frame • Strong holding magnetic edge
• Shock absorbing end plates • Top read window
Item #
em81.24
em81.48
em81.68
Desc.
24" Mag Level w/45° vial
48" Mag Level
48" Mag level w/Case #68-048
B. DURAGUARDTM 48” LEVEL CASE
Price
$30.00
$60.00
$70.00
#68-048 . . . . . . . . . . . . . . . . . . . . .$12.00
• Protects your level from damage • Tough, high density polyethylene
C. SOFT SIDE LEVEL CASE
#68-148 . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.00
• 600 Denier poly construction w/double stitching and bar tacking • Convenient carrying handle &
adjustable shoulder strap • Heavy-duty zipper closure • 48” case also holds 9” torpedo level in inner
pocket with velcro closure
D. 9” HEAVY DUTY MAGNETIC TORPEDO LEVEL
#em81.9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.00
• True Blue™ vials are accurate to within 0.0005” per inch in all 10 level and plumb positions
• Heavy-duty extruded aluminum frame with top read window • Vials read plumb, level and 45°
• Strong holding magnetic edge • V-grooved working edge fits on pipe or conduit
E. 10” MAGNETIC TORPEDO LEVEL
#em81.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
• True Blue™ vials are accurate to within 0.0005” per inch in all 10 level and plumb positions
• Heavy-duty aluminum frame with top read window • Powerful rare earth magnets holds 10 lbs.
• V-grooved working edge fits on pipe or conduit
F. 12” MAGNETIC TOOL BOX LEVEL
#em81.12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.00
• True Blue™ vial equipped • Four vials read plumb, level, 45 degrees, and Vari-Pitch™ • V-Groove
working surface • Top Read windows for level and Vari-Pitch™ • Full length magnetic strip
• Durable aluminum construction
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
12
CONSTRUCTION LEVELS • SQUARES
A. 9” HEAVY DUTY MAGNETIC TORPEDO LEVEL #em51.9 . . . . . . . . . . .$14.00
• True Blue™ vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions
• 6061 aircraft grade aluminum chassis, top read window • Vials read plumb, level and 45°
• Strong-holding magnetic edge • V-grooved working edge fits on pipe or conduit • Dual molded
rubber endcaps for extreme shock resistance
B. em71 SERIES MAGNETIC LEVELS
•
•
•
•
True Blue™ vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions
Dual molded rubber endcaps for extreme shock resistance • 300° view top-reading level vial
Neodymium Rare Earth magnets for super-strong holding onto ferrous surfaces
24 inch em71 version features 45° vial for mechanical applications
Item #
em71.24
em71.48
em71.78
Desc.
24” Magnetic Level
48” Magnetic Level
78” Magnetic Level
Price
$60.00
$85.00
$120.00
FRAMING SQUARES
C. 16" x 24" "FAT BOY" ALUMINUM FRAMING SQUARE
#1240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.00
•
24" x 2" body, 16" x 1-1/2" tongue • 50% thicker, heavy-gauge aluminum
3/16" thick resists bending • Deep stamped inch graduations, numbers and
rafter tables for long life • Aluminum construction will not rust or corrode
• Includes 1/8" • 1/10" • 1/12" • 1/16" stamped graduations
D.16" x 24" ANODIZED ALUMINUM PROFESSIONAL SQUARE
#1190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
• 24" X 2" body, 16" x 1-1/2" tongue, 1/8" thick • Easy-reading black anodized
finish with permanently stamped white numbers • Aluminum construction
will not rust • Includes 1/8" • 1/10" • 1/12" • 1/16" stamped graduations and
rafter tables
E. 16" X 24" ALUMINUM PROFESSIONAL SQUARE
#1140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.00
• 24" x 2" body, 16" x 1-1/2" tongue, 1/8" thick • Permanently stamped numbers,
rafter tables, graduations on brushed aluminum finish • Aluminum construction
will not rust or corrode • Includes 1/8" • 1/10" • 1/16" stamped graduations
Prices subject to change without notice
13
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
SQUARES • STRAIGHT EDGES
Prices subject to change without notice
A. 16" x 24" STEEL TRADESMAN SQUARE #1110......$10.00
A
• 24" x 2" body, 16" x 1-1/2" tongue, 1/16" thick
• Permanently stamped numbers and 1/8" graduations
• Durable protective epoxy finish to prevent rust
B. POLYSTEELTM T-BEVEL #130 . . . . . . . . . . . . . . .$6.00
• Durable POLYCAST® handle with recessed hand grip
• Low profile locking nut allows for left or right hand use
• Adjustable 9" stainless steel blade
B
C. POLYSTEELTM TRY-BEVEL #120 . . . . . . . . . . . . .$10.00
•
•
•
•
•
•
C
Stainless steel blade prevents rust and corrosion
POLYCASTTM handle includes acrylic vial for level, plumb and 90°/45°
Has 1/8 inch graduations
Reads full 8" on inside and outside measurements
Reads full 200mm on inside and outside measurements
120 POLYSTEELTM Tri-Square with inch graduations
D. COMBINATION SQUARE w/STAINLESS STEEL BLADE
• Heavy-Duty Professional Combination Square
• Blade Sizes: 6", 12",16"
• Square stainless steel blade spans wider boards, 1/8", 1/16" & 1/32"
graduations
• Self-aligning drawbolt
• Hardened scriber
• Machined square head
• E-Z slide pad
Item #
E255
E250
E280
Desc.
6" stainless steel blade
12" stainless steel blade
16" stainless steel blade
D
Price
$13.00
$16.00
$17.00
E. Heavy-Duty Aluminum Straight Edges
• Easy reading inch scale graduations
• Heavy-duty aluminum straight edge
• 2" width x 1/8” thick
Item #
4002
4003
4004
E
Desc.
24” Aluminum
36” Aluminum
48” Aluminum
Price
$6.00
$8.00
$10.00
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
14
GUIDES • PROTRACTORS • TAPES
A
A. Pro's Edge Cutting Guide
#900 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.00
• 2 Heavy-duty aluminum rails joined together make straight, accurate cuts up to 8' 6"
• Includes both rails, joiner plate, 2 c-clamps
• Use with circular saw, router, utility knife, jigsaw, etc.
B
B. 48" POLYCAST¨ Bubble Stick #320 . . . . . . . . . . . . . . . . . . . . . . . . . .$10.00
•
•
•
•
POLYCAST¨ straight edge with level and plumb vials
Silk screened, easy to read graduations
Will not mar or scratch fine surfaces
Handy for wallpaper and shelving work
C
C. POLYCAST PROTRACTOR w/ MAGNETIC BASE
#36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.00
• Transfer angles to within 1 degree
• Magnetic base and back
• Built-in pitch calculator on back
D
D. SMALL ANGLE MAGNETIC PROTRACTOR
#361 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.00
• Full view acrylic MONO-VIAL®
• Dial graduated in 5 degree increments
• Magnetic base • Compact design
E. OPEN REEL FIBERGLASS MEASURING TAPE
E
•
•
•
•
Heavy-duty construction, high impact resistant ABS body
Numbers and graduations printed in black
Fiberglass tape will not rot, corrode or distort
Yellow case, white side of tape has inch markings, yellow side has
engineering scale
• Comfortable rubber hand grip
Item #
6799
6820
6830
15
Desc.
100' x 1/2" FG Tape
200' x 1/2" FG Tape
300' x 1/2" FG Tape
Price
$20.00
$30.00
$40.00
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
LED WORK LIGHTS
A
A. Rechargeable Cordless LED Extreme Lights
Extreme Light Rechargeable Cordless LED Worklight
Features and Benefits:
•
•
•
•
•
•
•
•
New wide angle LED technology with 174 Lumens
30 Super brilliant 100,000 hour floodlight style LED’s
Rugged ABS industrial grade housing and grip with lens guard
Polycarbonate high strength swivel hook
Up to 10 hour run time
NiMh battery pack has 1000 charge cycles
Indicator LED shows when battery is low
120 volt “smart” charger included
The Extreme LED lights have bright color housings that are extremely durable. It's designed with a swivel
hook that allows the light to stay on the subject, not in your eyes.
Available Colors:
Red • #EZRXL3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Fluorescent Orange • #EZRXL3000FL-O . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Fluorescent Yellow • #EZRXL3000FL-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Fluorescent Green • #EZRXL3000FL-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Fluorescent Blue • #EZRXL3000FL-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
B. Pocket LED Mini Work Light Stick
#EZRPCLED6 ...........................................................................$19.95
Now includes clip on back and magnetic base!
•
•
•
•
•
•
•
•
6 brilliant high power LEDs!
Illuminates hard to reach, tight areas.
36 Lumens and up to 11 hours run time.
Produces a floodlight effect as well as directional.
Molded clip to stay in your pocket.
Water resistant.
Rugged, made to last.
3 AAA batteries included.
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
16
PIPEFITTER / WELDER TOOLS
A. STANDARD CENTERING HEAD #53076 . . . . .$80.00
• One piece “Y” shaped body is designed to establish and
mark a centerline at any angle around the circumference
(inside or outside) on a pipe or tank.
• Use as protractor level. • Remove and use the hardened center
punch for other marking jobs.
• The easy to replace 360° vial makes it a snap to repair.
• The dial is marked in 2-1/2° increments
A
B. SMALL CENTERING HEAD #53025 . . . . . . . .$65.00
B
• 1 piece “Y” shaped body like our standard model, only smaller.
• Designed for smaller diameter pipe.
• Use it to establish and mark a centerline at any angle
around the circumference on a pipe or tank.
C. UNIVERSAL MAGNETIC TAPE HOLDER . . . .$18.00
#89754
C
• Designed with no removable parts and works with most
industrial measuring tapes. • Use as magnetic pocket level and
your third hand when working alone. • Will secure the end of
your tape while laying out close tolerance measurements from
end or the center of your material.
• Strong 25 pound pull magnet.
• Small rare earth magnets hold your measuring tape in place.
• 4” long and 5/8 of an inch square.
D. RADIUS MARKERS
D
• Precision tools made of rust proof aluminum.
• Precisely aligned spring tension arms guarantee accuracy
and rigidity.
• Holder works with flat or round soapstone and pencils.
E
Item #
72800 - Mini
72805 - Standard
72810 - Large
Desc.
11” span=22” cir.
25” span=50” cir.
50” span=100” cir.
Price
$26.00
$40.00
$60.00
E. ACCESSORY DEGREE LEVEL # L-2 . . . . . . . .$45.00
• Pocket size, combination degree level • This handy pocket level is
2 3/8” long and 11/2” wide. • Marked in 21/2” degree increments and
numbered every 10° • It has a magnet in the base for easy hands
off use and can even hold the end of a tape measure for solo use.
F. MAGNETIC BLOCKS #3-28 . . . . . . . . . . . . .$55.00
F
17
• Magnetic support blocks can be attached to any standard square
to form your own burning guide.
• Also use them to hold your square for various jobs.
• Attach to any straight edge up to 1/8" thick to form your own
burning guide.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
PIPEFITTER / WELDER TOOLS
A. MULTI-USE ANGLE BURNING GUIDE
#70001 . . . . . . . . . . . . . . . . . . . . . . . . .$120.00
• Magnetic base for use with a conventional or plasma
A
torch makes an excellent angle or straight cut every time.
• Can be used as a protractor, or multi-angle tri-square.
• Holds any standard square and most straight edges.
• Special squaring and marking jobs are a snap with this
multi-use tool.
ON
SALE!
B. TORCH TIP STANDOFF #70501 . . . . . . . . .$18.00
B
• Keeps your tip at the proper burning height at all times.
• Assists in making more uniform cuts.
• Keeps your cutting tips from being damaged
• Fits most cutting tips. Use with Magnetic Torch Guides,
Straight Edges & Clamped Guides.
C. WIZARD WRAPS
• Made from non-asbestos, heat resistant material, thick
edge for easy marking.
• SMALL #WW-16 (1”-6” Pipe) . . .
• MEDIUM #WW-17 (2”-16” Pipe) .
• LARGE #WW-17a (6”-30” Pipe) .
• X-LARGE #WW-19 (12”-48” Pipe)
. . . . . . .$14.00
. . . . . . .$20.00
. . . . . . .$30.00
. . . . . . .$45.00
C
D. MASTER MARKER w/Case #MM-501 . . . . .$285.00
• Size range is 8 to 48-inch pipe or structural steel beams.
Use for structural beam layouts and marking angles or
saddles on pipe and tubing. Magnets are built into the
main base legs to keep tool secure.
D
REDESIGNED to include these standard functions:
• Separate marking arm has 360° rotating shaft with a builtin leveling vial. Arms have spring-loaded joints and telescopes out to eliminate uneven surface problems
• Structural Adapter and Spring Buckle Strap are included
• There are no extra combination adapters to buy
• Machined from quality aluminum material then anodized
E. CIRCLE WIZ #CW-300 . . . . . . . . . . . . . . . .$55.00
• Cutting attachment for small to medium holes cuts in
E
plate or pipe.
• Handy for cutting out the holes for matching saddle cuts,
weldolets and threadolets.
• Made of solid brass and steel.
• The universal brass bushing adapts to any size/make of
cutting torch.
• Cuts holes from 5/8” diameter to 12” in diameter.
Prices subject to change without notice
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
18
PIPEFITTER / WELDER TOOLS
A. PIPE FLANGE ALIGNER with CASE
A
• All models will horizontally and vertical level the flange in one
easy step. • All come with 360° vial that “snaps” in and out for
easy replacements. Case is 16"L x 6"W x 3" deep.
• SLOTTED PINS #38240 . . . . . . . . . . . . . .$85.00
• THREADED PINS #38240-T . . . . . . . . . . .$85.00
• LARGE #38240-TL . . . . . . . . . . . . . . . .$105.00
B
B. TWO HOLE PINS
• Model # 42050 - Slotted pins w/ “friction fitting”knurled nuts.
One pin has a bubble for easier vertical leveling.
• Model # 42050-T - Has threaded pins. One pin has a bubble for
easier vertical leveling.
• Model # 42050-TL - Largest set. For holes up to 2” dia. One pin
has a bubble for easier vertical leveling.
• SLOTTED PINS #42050 . . . . . . . . . . . . . .$70.00
• THREADED PINS #42050-T . . . . . . . . . . .$70.00
• LARGE #42050-TL . . . . . . . . . . . . . . . . .$85.00
C
C. MULTI-PURPOSE CHARIOT CUTTING GUIDE
#24219 . . . . . . . . . . . . . . . . . . . . . . . . . .$75.00
D
• Will cut circles up to 39” diameter. Cut straight, irregular shapes,
circle and bevels. • Brass construction at heat stress points
• Universal bushing fits all torches.
D. MAGNETIC CIRCLE LAYOUT & CUTTING GUIDE
#28439 . . . . . . . . . . . . . . . . . . . . . . . . . .$85.00
E
• A circle layout tool w/sliding soapstone holder and 360° scale on
the magnetic base. • Cut circles up to 30' diameter. Bolt circles,
holes locations, baffle plate placement and circle sectioning.
• As a circle burning guide use this same tool to cut a round plate.
• The magnet is strong enough to support the weight of your torch.
E. POCKET PRO LEVEL #PP-200 . . . . . . . . . .$70.00
F
• Extra strong magnet • 2 stationary vials are placed at 90° angles
of each other and can be easily replaced if broken. • The dial is in
21/2 ° increments with spring tension. • 9” long and 11/2” wide for
easy handling and storage.
F. MAGNETIC TORCH GUIDE #23040 . . . . . . .$80.00
Has adjustable holding blocks and cutting rail extensions available
that allow you to add all the length you need for those special
cutting jobs. • Cutting guide is stainless steel and works with
conventional or plasma torches.
• 24" in. length with two adjustable magnetic holding blocks.
• 24" Extension. Each extension comes complete with one
5" long magnetic connector block.
19
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
PIPEFITTER / WELDER TOOLS
A. LIL’ WIZ CASE #8915 . . . . . . . . . . . . . . .$195.00
This is a great kit for anyone who burns holes (5/8” to 10" dia.)
in pipe, plate or structural steel
Case (13"L x 8"W x 3" Deep) includes:
• 1 Circle Wiz # CW-300
• 1 Combo Degree Level #L-2 (pocket size, magnetic, with 2-1/2°
increments)
• 1 Small Magnetic Centering Head # 53025-M (marks
degree around circumference of a bar or pipe)
• 1 Magnetic Tape Holder # 89754 • 1 - Flange Wizard Tools Catalog
• 1 - FREE BONUS Vial Repair Kit # 5102
A
B. MAGNETIC MITER MARKER #63803 . . . . .$185.00
New & Improved!!
• Completely redesigned and includes a magnetic base, making
structural beam layouts and marking angles or saddles on pipe and
tubing a snap. (Structural Adapter is included)
• No extra combo adapters to buy!
• Unique design allows telescoping out over existing welds to layout
angles or change angles of pipe fittings
• Marking arm is completely separate from main body and has it's
own 360° rotating shaft with built in leveling vial
• Arms have spring loaded joints for smooth & precision operation
• Size range: 1½ to 12" pipe and up to 12" structural beams
• NEW "Sight Unseen" magnets built right into the main base legs
• Sturdy snap latch polypropylene case included!
SALE PRICE
C. PIPE MAGICIANS CASE #8905
Was $275.00 On Sale . . . . . . . . . . . . . .$255.00
B
C
ON
SALE!
A person who works with pipe needs the finest tools available and a
way to protect them when not in use. The four (4) quality tools in
this case are a must when working with pipe.
Case (15"L x 10"W x 3-1/2" Deep) includes:
• 1 Pipe Flange Aligner # 38240-T
• 1 Standard Magnetic Centering Head # 53076-M
• 1 Pocket Pro Level # PP-200
• 1 Small Wizard Wrap # WW-16
• 1 FREE BONUS Vial Repair Kit # 5102
SALE PRICE
D. WIZARD BURNING GUIDES #8910
Was $225.00 On Sale . . . . . . . . . . . . . .$205.00
Case (15"L x 10"W x 3-1/2" Deep) includes:
• 1 Chariot Cutting Guide #24219-11 (will cover straight and radius
cuts along with hole burning from 5/8" to 30" diameter.
• 1 Magnetic Base w/Straight Pin #3105 (for larger holes/radiuses)
• 1 Magnetic Blocks #3-28 (great for clamping on squares and
straight edges)
• 1 Magnetic Tape Holder #89754 (third hand when working alone)
• 1 FREE BONUS Torch Tip Standoff #70501 (protects torch tip end
by controlling the distance from the material)
D
ON
SALE!
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
20
PIPEFITTER / WELDER TOOLS
New!
A. MULTI-HOLE IMAGER
#65007 . . . . . . . . . . . . . . . . . . . . . . . . .$265.00
• The Multi-Hole Imager is Flange Wizard®'s newest layout
tool. The strong "on and off" magnet makes positioning on a
round, flat, or irregular surface easy. A "bull's eye" circular leveling vial is built in the main tower of the Multi-Hole Imager to
assist in leveling the tool as required. The Multi-Hole Imager
will layout round or elongated holes (ellipse) on flat material or
pipe to match laterals at compound angles or at 90°. The main
arm is adjustable and notched to keep it centered with the
tower for true layouts.
A protractor, with adjustable shaft and sliding marking arm, fits
in the main arm of the Imager allowing for layout of elliptical
holes in header pipe for matching compound pipe laterals coming in to the header. It will layout matching holes in pipe for 90°
saddle branches. The Imager is great for round holes in plate or
elongated holes when coming in at an angle. The Multi-Hole
Imager is sold in a sturdy polypropylene case (p/n 8903) for
protection between jobs. A Spring Buckle Strap (p/n 5010) is
available to hold Imager in position for non-magnetic surfaces.
Marks 3/4' to 20' holes in plate with vertical shaft at 90°.
Marks 3/4' to 16' saddle holes in pipe with vertical shaft at 90°
Has a 150 pound holding magnet with a "on and off" switch.
New!
B. EXTRA LARGE THREADED TWO HOLE PINS w/CASE
#42050-TXL . . . . . . . . . . . . . . . . . . . . . $170.00
• Extra large and designed to be light weight for easier handling.
•
•
•
•
Extensions are included to accommodate thicker flanges.
Works with flange holes 5/8” to 3.0” dia.
Comes in sturdy polypropylene lockable case
Machined from hardened steel to make a very sturdy and lasting
tool. Threaded models have fast double lead threads.
• TXL model fits flanges with hole sizes to 2-7/8" in diameter.
21
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
WELDERS TOOLS
All Gauges Precision Made
from Stainless Steel
A. HI-LO WELDING GAUGE #GAL-1 . . . . . . . .$110.00
• Measures internal alignment of pipe after fit-up/alignment, cuts
radiographic rejects.
• Measures internal misalignment of pipe before and after tacking.
• Measures scribe lines, crown height & weld fillet.
• New Slim design is 30% lighter!
• Measurements read in standard on one side & metric on opposite.
A
B
B. SINGLE PURPOSE HI-LO GAUGE #GAL-2 . .$40.00
• Checks Rootweld Space & Internal Misalignment
• 1/32 or Zero Line • Eliminates rejects & improves productivity
• Standard/English Gauge
C. ADJUSTABLE FILLET WELD GAUGE #GAL-3 .$85.00
• Measure fillet welds from 1/8” to 1” (with ± 1/32” accuracy) with
one economical, simple to understand gauge.
• Uses an offset arm that slides at a 45° angle to make fillet weld
length measurements.
• The gauge is calibrated to 32nds, with metric equivalents given, so
you get more accurate readings.
• Four screws hold the offset arm in position for future adjustments.
• This gauge also measures weld throat thickness to 1/16th”
• It’s 2¼” x 3” slim, weighs only 1½ oz & fits easily into a pocket.
D. BRIDGE CAM GAUGE #GAL-4 . . . . . . . . . .$120.00
• The following measurements are possible either in inches or
millimeters with the Bridgecam Gauge:
• Angle of preparation, 0º to 60º • Excess weld metal (capping size)
• Depth of undercut • Depth of pitting • Fillet weld throat size
• Fillet weld length • Misalignment (high-low)
C
D
E
E. POCKET BRIDGE CAM GAUGE #GAL-4A . . .$135.00
• The following measurements are possible either in inches or
millimeters with the Bridgecam Gauge:
• Angle of preparation, 0º to 60º • Excess weld metal (capping size)
• Depth of undercut by 1/32 • Depth of pitting 1/32 • Fillet weld
throat size1/64 or .5mm • Fillet weld length • Misalignment (highlow)
F
F. V-WAC WELD GAUGE #GAL-5 . . . . . . . . . .$35.00
• Checks Undercut, Crown Height, Porosity & Pits
• Metric or English
G. A.W.S WELD GAUGE #GAL-6 . . . . . . . . . .$35.00
• Pocket sized • Used to determine size of a fillet weld
• Checks permissible tolerance of convexity, concavity, & underfill
• Checks permissible tolerance of reinforcement
G
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
22
WELDERS TOOLS
Prices subject to change without notice
All Gauges Precision Made
from Stainless Steel
GAUGE
A A. WTPS
#GAL-7 . . . . . . . . . . . . . . . . . . . . . . . . . .$65.00
B
• Measure Undercut. Undercut will be no more than .010 deep
when the weld is transverse to the primary stress in the part that
is undercut.
• Precision Made from Stainless steel
• All markings & dimensions are laser engraved
• Gauge set comes with a precision ground calibration block,
ground to .0005 tolerance for accuracy
B. FILLET WELD GAUGE SET (7 pcs.)
#GAL-8A . . . . . . . . . . . . . . . . . . . . . . . . .$45.00
C
• Quality stainless steel construction
• Knurled nut holds set together
• Allows fast accurate measurement of (11) different fillet weld
sizes-concave or convex
• Sizes and numerals are etched into both sides for easy reading.
C. PRE-INSPECTION POCKET FILLET WELD GAUGE
SET (3 pcs.)
#GAL-10 . . . . . . . . . . . . . . . . . . . . . . . . .$26.00
D
•
•
•
•
Pocket size - Measures 8 Size Fillets
Checks leg length, throat size, plus allowable convexity
All increments permanently engraved (Standard & Metric)
Handy key chain holds set together.
D. INSPECTION KIT W/ POUCH #GAL-12-P . . .$140.00
• Inspection Tool Kit with Wrap-Around Pouch Includes:
• Hi-Lo gage • Telescoping Oval Mirror • Flashlight
• Fillet Weld Gauges • Chrome Rule
E. MINI FILLET WELD KEYS #GAL-16 . . . . . . . .$55.00
E
• Pocket size- Handy key chain holds set together
• Measures Fillet Weld Leg
• Measures Fillet Weld Throat
• 11 Different Sizes (Standard & Metric)
• All Gauges Stainless Steel
F. PIPE IT GAGE #GAL-17 . . . . . . . . . . . . . . .$80.00
F
23
•
•
•
•
Range is 0 to 1/2” in 1/16” & .020 increments
Arm can be locked in place at any dimension
Gauge fits in shirt pocket, come with Pocket Protector
Handy formulas on front & Decimal Equivalents on back
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
WELDERS TOOLS
A. MEDIUM SIZE TOOL KIT
#GAL-12-MED . . . . . . . . . . . . . . . . . . . . .$395.00
New!
• Measures: 13" X 8" X 3"
Tools Included:
• V-WAC Gage
• Magnifier
• AWS Type Gauge
• Hi-Lo Gage
• Micrometer w/ Ball
• Telescoping Mirror
• 6" Starrett Scale
B. AMERICAN WELDING SOCIETY (AWS) TOOL KIT
#GAL-12-AWS . . . . . . . . . . . . . . . . . . . . .$220.00
A
New!
Tools Included:
• 0-150mm Dial Caliper
• 6" Scale w/ Clip
• 0-1" Micrometer
• 2" Reading Glass
• 7 Piece Fillet Weld Set
• V-WAC Gage
• AWS Type Gauge
B
C. BRIEF CASE TYPE TOOL KIT/LOCK & KEY
#GAL-12-BCK . . . . . . . . . . . . . . . . . . . . .$874.00
• Measures: 18" X 12 1/2" X 3"
Tools Included:
• V-WAC Gage
• Fillet Weld
• WTPS Gage
• Bridge Cam
• Single Purpose
• 6" Starrett Scale
• Telescoping Mirror
• Micrometer w/ Ball
• Hi-Lo Gage
• Skew-T Fillet Weld w/ Calc
• AWS Type Gauge
• ADJ Fillet Weld
• Magnifier
New!
C
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
24
ELECTRICIAN TOOLS
A
ON
SALE!
A. 5-PIECE SCREWDRIVER SET #0153-01C SALE PRICE
Was $42.00 . . . . . . . . . . . . . . . .On Sale $37.00
•
•
•
•
•
•
B
ON
SALE!
C
Prices subject to change without notice
Heavy-duty construction • Handle marked for easy identification
Precision machined, durable black phosphate tips
High-grade, rust resistant, chrome-plated finish
Soft, cushioned grip
Exceeds ASME/ANSI specifications • Lifetime limited warranty
Note: This is not an insulated tool • (Contains: 3/16" x 6" Cabinet,
1/4" x 4" Keystone, 1/4" x 6" Cabinet, 5/16" x 6" Keystone & #2 x 4"
Phillips)
SALE PRICE
B. 7-PIECE NUT DRIVER SET #0253-01C
Was $52.00 . . . . . . . . . . . . . . . .On Sale $45.00
• Rugged hollow shaft for screw clearance • Handle marked for easy
ID of nut driver size • Precision heads • High-grade, rust resistant,
satin chrome-plated finish • Soft, cushioned grip
• Exceeds ASME/ANSI specifications • Lifetime limited warranty.
• Note: This is not an insulated tool
• Set Includes: (3" Shank): Sizes 3/16" • 1/4" • 5/16" • 11/32" • 3/8"
• 7/16", & 1/2"
C. 7-PIECE COMBINATION RATCHETING WRENCH SET
#0354-01 . . . . . . . . . . . . . . . . . . . . . . . .$70.00
•
•
•
•
•
•
D
"Five-degree" ratcheting design for ease of use in tight spaces
Polished chrome finish for superior corrosion resistance
Precision heads for accurate fastener fit
Exceeds ASME/ANSI specifications
Lifetime limited warranty
Set Contains: 1/4" • 5/16" • 3/8" • 7/16" • 1/2" • 9/16" & 5/8"
D. STUBBY SCREWDRIVERS
#0153-28C FLAT BLADE . . . . . . . . . . . . . .$8.00
#0153-32C PHILLIPS TIP . . . . . . . . . . . . .$8.00
• Precision-machined tips for exact fit • Cushioned handle marked for
easy ID of screwdriver size • Strong, durable black phosphate tips
• Exceeds ASME/ANSI specifications • Lifetime limited warranty
• Note: This is not an insulated tool • Round Shank 1/4" x 1-1/4"
Flat Blade Screwdriver Overall Length: 3-1/8"
E
E. 9-PIECE FOLDING HEX-KEY OR BALL-END SET
#0254-11 (Hex Key) . . . . . . . . . . . . . . . .$10.00
#0254-12 (Ball Key) . . . . . . . . . . . . . . . . .$14.00
• Includes sizes 5/64" • 3/32" • 7/64" • 1/8" • 9/64" • 5/32" • 3/16"
& 7/32"& 1/4")
• One-piece, powder-coated handle/case for corrosion resistance
• Heat-treated and tempered for extra strength and durability
• Exceeds ASME/ANSI specifications • Lifetime limited warranty.
25
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
INDUSTRIAL PRODUCTS
A. 5 PIECE LOCKING PLIER SET WITH KIT BAG
#VGP538KB . . . . . . . . . . . . . . . . . . . . . . .$63.95
• Fast Release™ is 2x easier to open, has a non-trigger release, and
offers one hand operation
• The no-slip ProTouch™ grip provides comfort and leverage while
reducing vibrations and hand fatigue
Set includes One Each:
10R - 10" Straight jaw locking pliers. Allows for max contact on flat,
square or hex work. Use for safer grinding or as a portable vise
10CR - 10" Curved jaw locking pliers. Involute jaw curve permits
tremendous pressure on four points of any style nut or bolt head.
7WR - 7" Curved jaw locking pliers w/ wire cutters. Wire cutter cuts
up to a 1/4" bolt. Involute jaw curve permits tremendous pressure on
four points of any style nut or bolt head
6LN - 6" Long nose locking pliers. Wire cutter cuts up to a 1/4" bolt.
Long straight nose allows for use in narrow spaces. Use to clamp or
tighten bolts or to extract items in hard-to-reach places.
5WR - 5" Locking pliers. Curved jaw locking pliers w/ wire cutters.
Wire cutter cuts up to a 1/4" bolt. Involute jaw curve permits user to
put tremendous pressure on four points of any style nut or bolt head.
A
B. 5 PIECE LOCKING PLIERS SET W/CANVAS TOOL BAG
#VGP2077704 . . . . . . . . . . . . . . . . . . . .$66.95
• Constructed of high grade heat treated alloy steel.
• Turn screw to adjust pressure and fit work; stays adjusted for
repetitive use.
• Guarded release trigger quickly unlocks and protects from
accidental release.
• Hardened teeth are designed to grip from any angle.
Set includes:
10" curved jaw locking pliers with cutter (10WR)
10" straight jaw locking pliers (10R)
7" curved jaw locking pliers with cutter (7WR)
6" long nose locking pliers (6LN)
5" curved jaw locking pliers with cutter (5WR)
A soft side tool organizer bag
C. 3 PIECE GROOVELOCK PLIERS KIT
#VGP2078711 . . . . . . . . . . . . . . . . . . . . .$60.95
• Press and slide button quickly adjusts lower jaw
• Jaw grips on round, flat, square and hex shapes
• Groove positions provide optimum hand location for a better grip
• ProTouch™ grips provide extra comfort and reduces hand fatigue
• Ratcheting action allows GrooveLock to be adjusted from the open
position up to the work piece by pushing the handle up - no need to
press the button
• Set includes: 8", 10" and 12" GrooveLock pliers • Roll Up Kit Bag
B
C
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
26
INDUSTRIAL PRODUCTS
D
E
D. 8 PIECE GROOVELOCK PRO PLIERS SET
#VGP2078712 . . . . . . . . . . . . . . . . . . . .$109.95
•
•
•
•
•
Press and slide button quickly adjusts lower jaw
All purpose jaw grips on round, flat, square and hex shapes
Groove positions provide optimum hand location for better grip
ProTouch™ grips provide extra comfort, reduce hand fatigue
Ratcheting action allows GrooveLock to be adjusted from the open
position by pushing the handle up - no need to press the button
• Anti-pinch design prevents handles from pinching.
Set includes one each:
8", 10", 12" GrooveLock Pliers
10" Adjustable Wrench
8" Long Nose Plier
8" Linesman’s Plier
6" Diagonal Cutter
6" Slip Joint Plier
Roll Up Kit Bag
E. 5 PIECE GROOVELOCK & TRADITIONAL PLIERS SET
#VGP1802536 . . . . . . . . . . . . . . . . . . . . .$86.95
5 Piece Set Contains:
6" GrooveLock V-Jaw
8" Long Nose Plier
8" Angled Diagonal Head Cutter
9.5" Linemans Plier
10" GrooveLock Straight Jaw
Roll Up Kit Bag
F
F. 7 PIECE TRADITIONAL & LOCKING PLIERS SET
#VGP1802537 . . . . . . . . . . . . . . . . . . . .$105.95
Set includes:
6" GrooveLock V-Jaw
8" Long Nose Pliers
8" Angled Head Diagonal Cutting Pliers
9.5" Linemans Plier
10CR Vise-Grip Fast Release
9LN Vise-Grip Fast Release
10" GrooveLock Straight Jaw
Roll Up Kit Bag
G
27
G. 11" QUICK ADJUSTING PIPE WRENCH
#VGP274001 . . . . . . . . . . . . . . . . . . . . . .$39.95
•
•
•
•
•
The Quick Adjusting Pipe Wrench
One handed operation enhances user's speed and convenience
Ratchets quickly to work surface • Smooth release
43% less weight than standard 14" cast iron pipe wrenches
Jaw capacity: 2-1/4"
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
IRONWORKER TOOLS
Klein Tools
A. ADJUSTABLE SPUD WRENCH #3239 . . . . . .$85.00
•
•
•
•
•
Versatile wrench fits all nuts and bolts to 11/2”.
Eliminates the need for carrying several fixed-size wrenches.
Drop-forged from select alloy steel with continuous-taper handle.
Industrial black finish.
15” length.
B. 1/2” DRIVE RATCHET
SPUD WRENCH #3238 . . . . . . . . . . . . . . .$85.00
•
•
•
•
Accepts 1/2” square-drive hex socket.
Reversible ratchet.
Eliminates the need for carrying several fixed size wrenches.
Drop forged from select alloy steel with continuous taper handle
for aligning bolt holes.
• Industrial black finish.
A
C. ERECTION WRENCHES
• Drop forged from select alloy steel to withstand high-leverage
and heavy loads.
• Extra-heavy-duty head area gives maximum strength and durability.
• Wrenches 141/2 to 1711/16” in length. American Bridge Design.
Item #
3210
3211
3212
3213
3214
Desc.
US Heavy
US Heavy
US Heavy
US Heavy
US Heavy
Bolt Size
1
/2”
5
/8”
3
/4”
7
/8”
1”
Price
$38.00
$42.00
$46.00
$58.00
$65.00
B
D. BROAD HEAD BULL PINS
• Drop-forged, heat treated, bull pin which increases efficiency by
providing a larger striking surface.
• Design of head also reduces chance of pin slipping from the hand
when aligning holes. Standard Bull Pins also available.
Item #
3255
3256
Desc. Top & Pt.
Dia.
11/4”-5/16”
11/16”-1/4”
Length
Price
13”
10”
$22.00
$22.00
C
E. BARREL-TYPE DRIFT PINS
•
•
•
•
Machined from forge-quality alloy steel.
Tapers are uniform and blend into body diameter.
Tough, drop forged steel will properly end-pein in use.
Heat-Treated.
Item #
3260
3261
3262
3263
Desc. Max &
Pt. Dia.
11
/16”-5/16”
13
/16”-7/16”
15
/16”-1/2”
1
1 /16”-9/16”
Length
Price
7.5”
8”
8”
8”
$12.00
$12.00
$12.00
$16.00
D
E
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
28
Klein Tools
IRONWORKER TOOLS
Prices subject to change without notice
A.- D. CONNECTING / SLEAVER BARS
A
B
• Provide extra leverage when positioning steel members and
aligning bolt holes.
• These drop-forged fit-up bars are pointed on one end, the chisel
end is available straight or at 15o angle to give greater leverage.
• Hexagonal or round.
C
D
A & B - HEXAGONAL
Item #
3240
3242
3243
3244
Desc. / Dia. / Lgth.
3
/4”-30”str. chisel
end3/4”-30”
7
/8”-36”
3
/4”-24”
Item #
3245
3246
3247
3248
3241
Desc. / Dia. / Lgth.
3
/4”-30”
7
/8”-36”
3
/4”-24”
7
/8”-30”
3
/4”-30”str. chisel end
Price
$45.00
$45.00
$65.00
$40.00
C & D - ROUND
Price
$45.00
$56.00
$40.00
$56.00
$45.00
E. 9” TORPEDO LEVEL #931-9RE . . . . . . . . .$30.00
• Heavy duty magnets.
• Allows hands-free measurements on iron or steel surfaces
(level, plumb, and 45°),
• Rare Earth magnets and vials framed with E-Z- See™
glow-in-the-dark material.
• Handy V-grooved edge for pipe or conduit work.
E
F
F. HIGH-LEVERAGE NE-TYPE SIDE CUTTERS w/FISH
TAPE PULLING GRIP #D213-9NETP . . . . . .$40.00
• Has special groove at the hinge for gripping and pulling flat fish
tapes. • Design provides a quick, sure grip and minimizes pulling
effort without damaging the fish tape. • Plastic dipped handles.
G. STANDARD SIDE CUTTERS for
REBAR WORK #D201-7CST . . . . . . . . . . .$40.00
G
• Designed and sharpened for cutting soft annealed tie wire.
• Special, heavy knurled jaws. • Hook bend in one handle for nonslip grip. • Coiled spring holds jaws open. • Plastic dipped handles.
H. 93/8” FISH TAPE PULLING PLIERS
#J2000-9NETP . . . . . . . . . . . . . . . . . . . .$60.00
H
29
• Cuts ACSR, screws, nails and most hardened wire.
• Quickly/easily pulls 1/8" or 1/4" flat steel fish tape without damage.
• High-leverage design. Rivet closer to the cutting edge for 46%
greater cutting and gripping power than other plier designs.
• Streamlined design, Sure-gripping, cross-hatched knurled jaws.
• Induction-hardened cutting knives for long life. • Hot-riveted joint
ensures smooth action and no handle wobble.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
IRONWORKER TOOLS
A. SQUARE NOSE SIDE CUTTERS
#D201-9 . . . . . . . . . . . . . . . . . . . . . . . .$45.00
Klein Tools
A
• The original Klein side-cutting pliers for general purpose use.
• Squared nose and knurled jaws.
• Plastic dipped handles.
B. HIGH-LEVERAGE DIAGONAL CUTTERS
w/ANGLED HEAD #D248-9ST . . . . . . . . . .$30.00
• High-leverage, heavy-duty with head angled for easier work in
confined areas.
• Standard bevel cutting knives.
• Plastic dipped handles.
B
C. HIGH-LEVERAGE SIDE CUTTERS for REBAR WORK
#D213-9ST . . . . . . . . . . . . . . . . . . . . . . .$40.00
• High-leverage design for easier cutting of soft annealed tie wire.
• Provides a 46% greater mechanical cutting and gripping
advantage than other pliers of this type.
• Knurled jaws.
• Hook bend in one handle for non-slip grip and coiled spring.
• Plastic dipped handles.
C
D. INSULATED HIGH-LEVERAGE
NE-TYPE SIDE CUTTERS w/CRIMPING DIE
#D213-9NE-CR-INS . . . . . . . . . . . . . . . . .$90.00
• High-leverage design provides a 46% greater cutting and
gripping power than regular side cutters of the same size.
• Has smooth, streamlined nose with knurled jaws.
• Has crimping die at the hinge for crimping sleeve connectors.
• 8½” length, insulated.
D
E. INSULATED UNIVERSAL SIDE CUTTERS
w/CRIMPING DIE #12098-INS . . . . . . . . . .$85.00
•
•
•
•
•
•
Pliers with knurled front jaws.
Toothed pipe grip.
Side cutting knives.
Wire cutters on both sides.
Crimping die for sleeve connectors behind hinge.
8½” length, insulated.
F. 9” IRONWORKER'S WORK PLIERS - HIGH-LEVERAGE
#D2000-9ST . . . . . . . . . . . . . . . . . . . . . .$55.00
• Twists and cuts soft annealed rebar tie wire.
• Rivet is closer to the cutting edge for 46% greater cutting and
gripping power.
• Hook bend handle. Spring-loaded action for self-opening.
• Heavy-duty knurled jaws.
• Features combination polished and black-oxide finish.
E
F
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
30
Klein Tools
A
IRONWORKER TOOLS
A. COMBINATION KNIFE & SCISSOR SHARPENER
#48036 . . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
• High-grade, tungsten carbide inserts sharpen both sides of
the blade at the same time.
• Restores knife edge in three or four strokes.
• To sharpen scissors, place the sharpener flat on its side, and with
a few quick strokes, draw the scissors blade through the slot.
• Built-in finger guard helps to protect your hand.
• Lightweight, compact size for easy carrying and storage.
• Sharpens electrician’s scissors, pocket knives, retractable-blade
utility knives, razor blade knives and serrated knives.
B
B. POCKET-SIZED KNIFE SHARPENER
#44151 . . . . . . . . . . . . . . . . . . . . . . . . . .$25.00
• A rugged, versatile sharpener with a unique design.
• Blade unscrews and stores in handle for convenient carrying in
tool box, pouch, or pocket.
• Blade is precision-cut, hard-chromed steel for accurate,
consistent sharpening and long life.
• Magnetized to trap metal particles when sharpening.
• Handle is high-visibility orange color with handy pocket clip.
C
C. MULTI-PURPOSE SHARPENING STEEL
#44150 . . . . . . . . . . . . . . . . . . . . . . . . . .$50.00
• A knife sharpener – and a lot more.
• Tungsten-carbide bonded to fine, medium, and rough sharpening
surfaces, effectively sharpens any knife.
• Chisel point makes tool useful for hacking, prying, scraping,
splitting, cutting sheet metal or other rough jobs that would
harm a knife.
• Leather lanyard holds tool in sheath and secures it to belt or ring.
D. GRIP-IT© STRAP WRENCH
D
• Completely adjustable strap wrench.
• Urethane-covered, high-strength belting attached to lightweight,
I-beam handle.
• Cam-action design permits uniform, high-torque application.
• Under normal conditions will not scratch, damage or deform
polished pipe and fittings, plastic pipe and fittings
• Also works on alternator belts, flywheels, and propeller assemblies.
#S-6H (6” Handle) . . . . . . . . . . . . . . . . .$20.00
#S-12H (12” Handle) . . . . . . . . . . . . . . . .$30.00
#S-18H (18” Handle) . . . . . . . . . . . . . . . .$90.00
31
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
IRONWORKER / ELECTRICIAN TOOLS
Klein Tools
A. SPUD WRENCH HOLDER
• Leather wrench holders have tool-slots for 2 SPUD wrenches.
#5459T . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
1
• Has a tunnel loop to fit belts up to 3 /2” wide or to slide over
D-rings, buckles & other accessories.
A
#5459T
#5461T
#5460
#5460 . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
• Slotted to fit on a 2” wide belt.
#5461T . . . . . . . . . . . . . . . . . . . . . . . . .$22.00
• Cotton web tunnel loop and leather • Fits belts up to 2"
B. BULL PIN HOLDER
#5417
B
• Leather holders for Klein bull pins. Attaches to belt.
#5417 . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
#5417T
• Slotted to fit on a 2” wide belt.
#5417T . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
• Has a tunnel loop to fit belts up to 31/2” wide or to slide over
D-rings, buckles & other accessories.
C. LEATHER TAPE RULE HOLDER
•
•
•
•
Cut-out sides for easy access to tape.
Slotted for attaching to belts up to 2½ inches wide.
Holds most 20”, 25” and 30” tapes.
Nominal overall size 4½” x 7”.
REGULAR #5195 . . . . . . . . . . . . . . . . . . .$14.00
LARGE #5196 . . . . . . . . . . . . . . . . . . . . .$16.00
C
D. LEATHER SNAP LOOP #5458 . . . . . . . . . . .$14.00
• Loop with snap hook for carrying an adjustable wrench, welder’s
igniter or other tool with hang hole.
• Slides on belts up to 4” wide.
D
E. LEATHER PLIERS HOLDER #5112 . . . . . . . .$22.00
• Bottom is vented to prevent collection of dirt & water.
• Slotted to fit belts up to 2” wide.
• Made of leather.
E
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
32
Klein Tools
IRONWORKER / ELECTRICIAN TOOLS
A. ULTRA-HYDETM BELT PADS
A
B
• Leather pad is 4" wide.
• 3 snap-open straps permit easy, secure attachment to any belt
up to 2" wide.
• Economical, rugged, durable and highly comfortable belt pad.
• When sizing a belt to fit this pad, add 1"- 2" to the belt waist size.
Item #
87900
87902
Desc.
22”
30”
Price
$18.00
$20.00
B. LEATHER SUSPENDERS #5413 . . . . . . . . .$60.00
• Soft chrome-leather. • Adjustable loops at the end of the 3 straps
to permit use on any Klein belt.
C. LEATHER /SYNTHETIC WOOL SHOULDER PADS
#87918 . . . . . . . . . . . . . . . . . . . . . . . . . .$40.00
C
• Shoulder pads are removable and attach w/ leather straps.
• Pads can be easily positioned for maximum comfort.
• The surface that contacts the user’s body is covered with
synthetic lamb’s wool, providing a soft cushion for shoulders and
absorbing moisture for greater comfort. • Sold in pairs only.
#5416L
#5416
#5416T
D. BULL PIN and BOLT BAG
•
•
•
•
•
D
Item #
5416
5416T
5416L
E
F
Bolt bag with bull-pin loop on each side.
Made of No. 4 canvas with double bottom.
3” belt loops or tunnel loop.
Bag is 5” x 9” x 10” deep, fits belts up to 3 “ wide.
Also available in leather.
Desc.
Canvas-3” belt loops
Canvas w/tunnel loop
Leather w/ tunnel loop
Price
$20.00
$24.00
$50.00
E. CANVAS ROD POUCH #5471 . . . . . . . . . . .$20.00
• Bag is tough No. 4 canvas with heat resistant hard-leather bottom
• Height in front is 12”, Back is 15½”
• Web loop for sliding over belt.
F. CANVAS ZIPPER BAG #5139 . . . . . . . . . . .$14.00
• No. 10 canvas bag with strong zipper. • Convenient storage for
pliers, wrenches and other tools.
• Pouch size 7” high by 121/2 long
G
ON
SALE!
33
SALE PRICE
G. TAPE MEASURE POUCH #5712
Was $20.00 . . . . . . . . . . . . . . . .On Sale $16.00
•
•
•
•
Part of the Klein PowerLineTM Series • Fits belts up to 21/4" wide
Holds most 35-foot tape measures, fasteners, nails, or wire nuts.
Two inside elastic loops fit screwdrivers, pencils, markers, etc.
Made of double layered 1000 denier Dupont Cordura Plus Nylon.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Klein Tools
IRONWORKER / ELECTRICIAN TOOLS
A. TAPE MEASURE HOLDER #5707 . . . . . . . . .$10.00
•
•
•
•
•
Part of the Klein PowerLineTM Series
Holds most tape measures with belt clips.
Rust-resistant metal clip riveted for strength.
Fits belts up to 21/4" wide
Made of double layered 1000 denier Dupont Cordura Plus Nylon.
A
B. MULTI-PURPOSE HOLDER #5708 . . . . . . . .$15.00
•
•
•
•
Part of the Klein PowerLineTM Series
Holds a flashlight, cellular phone, or electrical tester.
Fits belts up to 21/4" wide
Made of double layered 1000 denier Dupont Cordura Plus Nylon.
B
C. UTILITY KNIFE HOLDER #5716 . . . . . . . . . .$14.00
•
•
•
•
Part of the Klein PowerLineTM Series
Holds standard utility knife or other small tools.
Fits belts up to 21/4" wide
Made of double layered 1000 denier Dupont Cordura Plus Nylon.
SALE PRICE
D. CLOSEABLE POUCH #5714
Was $20.00 . . . . . . . . . . . . . . . .On Sale $18.00
•
•
•
•
C
Part of the Klein PowerLineTM Series
Closeable pouch helps protect supplies and tools.
Fits belts up to 21/4" wide
Made of double layered 1000 denier Dupont Cordura Plus Nylon.
E. CAMOUFLAGE CORDURA ZIPPER BAG
#5139C . . . . . . . . . . . . . . . . . . . . . . . . . .$15.00
®
D
ON
SALE!
®
• Constructed of 1000-denier Cordura Plus with Realtree
Advantage™ camouflage pattern, with leather Klein Logo.
• Nylon-stitched for durability.
• Exceptional resistance to abrasion, punctures, and tearing.
• Pouch size 7” high by 121/2 long
E
Prices subject to change without notice
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
34
Klein Tools
IRONWORKER / ELECTRICIAN TOOLS
A
A. LEATHER BOTTOM BUCKET
•
•
•
•
•
This Klein bucket is more widely used by public utilities than any other.
Made of No.1 canvas with Cycolac top ring.
Bottom is covered with leather reinforcement extending 3” up the sides.
Inside pocket measures 8” x 8”.
Polypropylene rope handle is reinforced with leather where it is spliced
around top ring.
• Top and bottom diameter is 12”, Height is 17”.
Item #
5104
5104S
Desc.
Reg. Bucket
Bucket w/ swivel snap
Price
$80.00
$90.00
B. WIDE OPENING STRAIGHT WALL CANVAS BUCKETS
B
• All of these durable straight-wall buckets are made of heavy-duty
No. 6 Canvas with Cycolac top rings.
• Molded bottoms.
• Polypropylene rope handle is reinforced with leather where it is spliced.
• #5109: 12” DIA. x 15” H
• #5109P: Same as #5109 but with 8”x 8” inside pocket.
• #5109S: Same as #5109 but with swivel snap.
• #5106PS: Same as #5109P but with swivel snap.
Item #
5109
5109P
5109S
5109PS
Desc.
12” DIA. x 15” H
W/Pockets
W/Swivel Snap
Swivel & Pockets
Price
$45.00
$55.00
$55.00
$65.00
C. STRAIGHT WALL CANVAS BUCKETS
C
• All of these durable straight-wall buckets are made of heavy-duty
No.6 Canvas with Cycolac top rings.
• Molded bottoms.
• Polypropylene rope handle is reinforced with leather where it is spliced.
• #5106: 9” DIA. x 14” H
• #5106P: Same as #5106 + two 7”x7” inside pockets.
• #5106S: Same as #5106 but with swivel snap.
Item #
5106
5106P
5106S
35
Desc.
9” DIA. x 14” H
W/Pockets
W/Swivel Snap
Price
$48.00
$60.00
$60.00
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
IRONWORKER / ELECTRICIAN TOOLS
A. LEATHER HAMMER HOLDERS
#5456-Slotted (Fits belts up to 2½" wide) . . . . . . .$15.00
#5456T-Tunnel (Fits belts up to 4" wide) . . . . . . .$18.00
Klein Tools
# 5456
A
# 5456T
• Leather construction. • Heavy-metal hammer loop riveted to
panel. • Riveted and stitched for extra durability.
• Holds all hammers except lineman's.
B. LEATHER HAMMER HOLDER TUNNEL LOOP/SNAP
#5456TS . . . . . . . . . . . . . . . . . . . . . . . . .$20.00
B
• Tunnel loop belt connection • Fits up to 4" belt
• Overall Size: 4¾" x 10" • Leather construction • Heavy-metal
hammer loop riveted to panel • 2 Snap-on positions holds small
and large hammers • Hold-down strap, unsnaps with downward
pressure • Riveted and stitched for extra durability • Holds all
hammers except lineman's
C. PLIERS, FOLDING RULE, SCREWDRIVER AND
WRENCH HOLDER #5118C . . . . . . . . . . . . .$70.00
C
• Leather construction. • Nickel plated alloy snap • No exposed
rivets in back • Riveted to assure long life • Pockets for 7", 8",
and 9" side-cutting pliers, most screwdrivers, 6' folding rules, and
open end wrenches from 9/16" to 13/16".
D. PLIERS AND SCREWDRIVER HOLDER
#5118S . . . . . . . . . . . . . . . . . . . . . . . . . .$32.00
•
•
•
•
Slotted belt connection • Fits up to 2" belt
Overall size: 4¼" x 10¾" • Leather construction
Riveted to assure long life.
Pockets for 7", 8", or 9" side-cutting pliers and most
screwdriver sizes.
D
E
E. FLASHLIGHT HOLDER #5129 . . . . . . . . . . .$14.00
•
•
•
•
Slotted belt connection • Fits up to 2¼" belt
Overall size: 3" x 9½" • Leather construction.
Designed for a standard two-cell flashlight.
Riveted to assure long life.
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
36
Klein Tools
IRONWORKER / ELECTRICIAN TOOLS
A. SLOTTED TOOL POUCH #5119 . . . . . . . . . .$22.00
A
•
•
•
•
•
•
4 Pockets
Fits up to 2" belt
Overall Size- 6½"x 8½"
Leather construction
Riveted and stitched for extra durability
Includes Knife Snap
B. 5-Pocket Tool Pouch #5126 . . . . . . . . . . .$35.00
•
•
•
•
•
B
Slotted belt connection
Leather construction
Overall Size: 6" x 8¾"
Riveted to assure long life
Knife snap included
C. 5 POCKET TOOL POUCH #5150
•
•
•
•
•
•
•
C
. . . . . . . . .$20.00
Slotted belt connection
Fits up to 2¼" belt
Size: 8½" x 9¼"
Leather construction
Curved to fit the hip for added comfort
Riveted to assure long life
Knife snap included
D. 5 POCKET CANVAS TOOL POUCH #5125 . . .$45.00
•
•
•
•
Looped belt connection • Fits up to 2¼" belt
Size: 7½" x 8½" • General -purpose pouch
Constructed of #4 canvas, leather back, pockets and loops.
Slotted-leather tape thong (allows easy removal of
1" I.D. tape rolls)
• Riveted and stitched for extra durability
• Leather tape thong included
D
E. 5 POCKET LEATHER TOOL POUCH #5125L . .$65.00
•
•
•
•
Looped belt connection • Fits up to 2¼" belt
Size: 7½" x 8½" • General -purpose pouch
Leather construction
Slotted-leather tape thong (allows easy removal of
1" I.D. tape rolls)
• Riveted and stitched for extra durability
• Leather tape thong included
E
37
Prices subject to change without notice
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
WORK SHIRTS
9 OZ. FLAME RETARDANT SHIRTS
Khaki Indura Flame Retardant Shirts
9 oz, 100% Heavy-weight Khaki Indura
shirt with pearl snaps. Guaranteed flame
resistant for the life of the garment.
“Indura FR” tag visible at bottom
edge of pocket.
#LAPS-INK (Khaki)
#LAPS-INN (Navy Blue)
Med - Large - X-Large = $46.95 • X-Large+ - XX-Large & XXX-Large = $51.95
7 OZ. FLAME RETARDANT SHIRTS
7 oz.100% Cotton Fire-Retardant Fabric from Westex w/plastic black snaps.
Compliant with: NFPA 70E • HRC 2 • ASTM F1506 • ARC RATING (ATPV) 8.7 • NFPA 2112
#LAP-IKH7
Khaki
#LAP-IRO7
Royal Blue
#LAP-IGR7
Grey
#LAP-INV7
Navy Blue
#LAP-IRE7
Red
#LAP-IMB7
Med. Blue
Med - Large- X-Large = $39.95 • XX-Large - XXX-Large = $42.95
HEAVY WEIGHT SOLID SHIRTS
BLUE DENIM
10 oz, 100%
cotton denim w/
Pearl Snaps.
# LAP-1000
KHAKI
10 oz, 100%
cotton khaki twill
w/Pearl Snaps.
# LAP-950
Med - Large - X Large = $36.95
X-Large+ - XX-Large & XXX-Large = $38.95
7 OZ. FLAME RESISTANT SHIRTS
KHAKI BROWN
7oz, 100% cotton
khaki with 12 oz.
Brown Duck Sleeves
is Flame Resistant
with buttons
# LAP-IKB7
Med - Large-X Large = $45.95
X-Large+ - XX-Large & XXX-Large = $49.95
KHAKI/CAMO
SLEEVES
7oz, 100% cotton
Khaki with Camo
Sleeves is Flame
Resistant with
buttons
# LAP-IKCS7
Med - Large-X Large = $44.95
X-Large+ - XX-Large & XXX-Large = $53.95
* Attention Contractors: We now offer the perfect Safety or Incentive awards for your craft personnel.
Your company logo or project information embroidered on any of our stylish Lapco work shirts.
Call 1-800-849-4821 for pricing.
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
38
WORK SHIRTS
Prices subject to change without notice
HEAVY WEIGHT 2-TONE WORK SHIRTS
10oz, 100% Brushed Cotton Khaki Twill or Denim shirts with 100% cotton collar, yokes,
pocket flaps and cuffs with pearl or black snaps.
KHAKI /BROWN DUCK
# LAP-9510B
KHAKI / BLACK
# LAP-9510BLK
KHAKI / GREEN
# LAP-9510G
Med - Large - X-Large = $38.95 • X-Large + - XX-Large & XXX-Large = $40.95
2-TONE CAMOUFLAGE SHIRTS
• 10oz -100% Brushed Cotton Khaki Twill Shirt
• 9oz - 100% Cotton True Timber Camo on the
collar, yokes, pocket flaps,
sleeves, or cuffs.
• Stainless Steel Black Snaps
KHAKI / CAMO
KHAKI / CAMO
# LAP-KCS
# LAP-9509C
Med - Large - X-Large = $38.95
X-Large + - XX-Large & XXX-Large = $40.95
FLAME RESISTANT STONE WASHED DENIM JEANS
# P-IND
4½ oz. 100% cotton flame resistant denim • Relaxed fit, boot cut
• Bar tack on stress points • A non conductive button closure, and 5 pockets.
• Sizes: Waist 30-44 - Length 30-37 = $45.00
• Sizes: Waist 46-50 - Length 30-37 = $50.00
*** All Flame Resistant Pants are “Drop Shipped” Directly from LAPCO and
have their own separate shipping costs.
If you are purchasing additional items along with the Flame Resistant Pants, Please call
800-849-4821 Monday-Friday 9 am-5 pm Eastern Standard Time before placing your order
for correct shipping & handling costs.
SIZES
Med
Large
X-Large
X-Large+
XX-Large
XXX-Large
39
NECK
15
16 ½
17 ½
18
19
20
SLEEVE
33
34
35
35
36
36
* Extra Shipping May Apply *
Be sure to use the Item #, Size, Description
& Price on your order.
Call 1-800-849-4821 for Pricing on
Sizes Not Listed.
Call today and have your info ready!
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
WORK SHIRTS & COVER-ALLS
#FRT-HEN-KHA
6.25 OZ HENLEY T-SHIRT
• 6.25oz 55% Modacrylic and 45% Cotton Henley T-Shirt.
• Meets requirements of performance: NFPA 70E, HRC 2, ASTM F1506
• Compliant With: ARC Rating ATPV 9.8
• Lapco fabric is guaranteed flame resistant for the life of the garment.
• The FR tag is visible on the garments.
• Available in Khaki or Navy Blue
#FRT-HEN-NVY
Med - Large - X-Large = $45.95
XX-Large & XXX-Large = $50.95
7 OZ FLAME RESISTANT COVERALLS
Lightweight for comfort but durable enough to work in.
• Made from 7oz 100% cotton twill fabric from Carolina
Performance. • Features triple needle stitching on the inseam,
outside seam, and arm seams for extra reinforcement, elastic
on the waist, and hidden snaps on the cuff and pant legs. •
There is a pencil pocket on the left arm and a zipper front
pocket and zipper left back pocket to keep items secure. • All
fabric is guaranteed flame resistant for the life of the garment
• ATPV 8.6 cal/cm2 HRC2 • NFPA 70E • NFPA 2112
Available in:
Gray #CVFRD-7GY • Khaki #CVFRD-7KH
or Navy Blue #CVFRD-7NY
Order Regular or Tall
Med (40) - Large (44) - X-Large (48) = $60.00
XX-Large (52) & XXX-Large (56) = $70.00
See the Lapco page on our website for exact sizing charts.
*** All Flame Resistant Cover-Alls are “Drop Shipped” Directly from LAPCO and have their own separate shipping costs.
If you are purchasing additional items along with the Flame Resistant Cover-Alls, Please call 800-849-4821 Monday-Friday
9 am-5 pm Eastern Standard Time before placing your order for correct shipping & handling costs.
LAPCO’s Oilfield Collection
Camouflage features oilfield items, such as drills, rigs, and helicopters.
Travel Bag 300 D-PVC
Material
11 x 10 x 22”
6 Panel Ball Cap Velcro Closure
18 Oz. Heavy Duty
Vinyl Bag
12 x 12 x 30
Item #
Lap-OFTB -Travel Bag
Lap-OGBC -Ball Cap
Lap-BVOFC1230 - Vinyl Bag
Price
$34.95
$8.50
$48.00
Weatherproof Vinyl Bag 12 x 12 x 30”
#Lap-BV1230...........................................$45.00
Useful for many purposes, Lapco’s rectangular bags are
made of waterproof leather-like 18 oz vinyl in a variety of
colors: Black, Camo, Grey, Navy, Red, or Royal.
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
40
WELDING LEATHERS
Prices subject to change without notice
A
A. HELMET BIB #LAP-HB . . . . . . . . . . . . . . .$10.00
• With adhesive backed Velcro© to be fixed to the inside of the helmet
and matching Velcro© sewn onto the leather.
• Helmet bibs are one-piece sewn with Kevlar© thread.
B
B. PATENTED LEATHER ARMPADS
• LAPCO’s original product, armpads provide protection from heat
and support the arm.
• Insulated with high-quality foam, and tapered to provide protection
above the elbow.
• Order for Left or Right arm.
LEFT ARMPAD #LAP-IAL . . . . . . . . . . . . . .$30.95
RIGHT ARMPAD #LAP-IAR . . . . . . . . . . . . .$30.95
C
C. ELBOW PAD #LAP-EP . . . . . . . . . . . . . . . .$18.00
• Similar to the armpad, but without the protective wrap-around flap.
• Elbow pads are held securely in place by two 2” straps.
D
E
D. SINGLE ROD HOLDER #LAP-RH . . . . . . . . .$12.00
• Double-bottom construction for long lasting use.
• Special top attachment allows the weight to be supported by your
belt.
E. DOUBLE ROD HOLDER #LAP-DRH . . . . . . .$20.00
• Double-bottom construction for long lasting use.
• Special top attachment allows the weight to be supported by your
belt.
• Features two pockets to keep your rods separate or use one
side to keep your rod stubs.
F
F. NECK BIB #LAP-NB . . . . . . . . . . . . . . . . .$16.00
• Attaches around the neck with Velcro©.
• Neck bibs eliminate the weight/bulkiness of helmet bibs.
• Protects the neck and chest during overhead welding.
41
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
SLEEVES • CAPS • PADS
A. ELASTIC SINGLE SLEEVES
A
• Sold as pairs, these 20 inch sleeves are held securely on the arm by
1½” elastic, available in:
• 100% cotton 10oz. Blue Denim or
• 12oz Brown Duck fabric
Item #
LAP-BDSE
LAP-DKSE
Desc.
Blue Denim (10oz)
Brown Duck (12oz)
Price
$12.00
$12.00
B. WELDING CAPS
• Fully reversible, these preshrunk 100% cotton caps are available in a
variety of colors, but also in solid black and solid white. Sizes range
from 6 1/2 through 8.
SOLD BY THE DOZEN - ALL THE SAME SIZE
Item #
LAP-C
LAP-CC
LAP-CW
LAP-CB
Desc.
12 Assort. Caps
12 Camouflage Patterned
12 Solid White Caps
12 Solid Black Caps
B
Price
$65.00
$65.00
$65.00
$65.00
C. SINGLE SLEEVES w/ PATENTED REMOVABLE ARMPAD
• Padded sleeve is two piece construction with a built-in pocket from
which a piece of high-quality foam can be inserted, removed or
replaced.
Item #
LAP-SLP23
LAP-SRP23
LAP-SLP25
LAP-SRP25
Desc.
23” Left
23” Right
25” Left
25” Right
C
Price
$31.95
$31.95
$35.95
$35.95
SALE PRICE
D. LEATHER KNEEPADS #LAP-KP
Was $18.00 . . . . . . . . . . . . . . . . .On Sale $14.95
• Oversized to provide complete coverage, our kneepads attach securely
with 2" elastic straps and Velcro©. A leather flap above the kneepad
also protects the knee from sparks while kneeling.
D
E. COOL PADS
• Designed to wear over your gloves to reflect heat and to resist sparks
and slag. • Available in single, double and triple layers Made of
Silvaprene© coated glass cloth • Will withstand temps up to 1100°
• Triple cool pads feature two layers of Silvaprene© plus a layer of 1/9"
high temperature insulation.
Item #
Desc.
Price
LAP-CPS
Single
$8.00
LAP-CPD
Double
$10.00
LAP-CPT
Triple
$12.00
LAP-CPAD
Aluminized Double
$8.00
LAP-CPAT
Aluminized Triple
$12.00
ON
SALE!
E
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
42
WORK UNBRELLAS
Prices subject to change without notice
A. 5' YELLOW VINYL UMBRELLA
#LAP-UM5VY . . . . . . . . . . . . . . . . . . . . .$75.00
A
5 ft. style comes with:
• Light aluminum frame
• Reinforced seams sewn with binding
• Comes in Yellow vinyl only
• Stand & Case Not included
B. 7' VINYL WORK UMBRELLA
#LAP-UM7V . . . . . . . . . . . . . . . . . . . . . .$115.00
B
C
7 ft. style features:
• NEW Heavy-Duty powder coated black aluminum frame
• Reinforced seams sewn with a binding
• Comes with a sturdy LAPCO Umbrella carrying case.
• Available in: Red, Blue & Yellow
• Stand Not included
C. 7' ACRYLIC COATED CANVAS UMBRELLA - CAMO
#LAP-UM7ACC . . . . . . . . . . . . . . . . . . . .$145.00
7 ft. style features:
• NEW Heavy-Duty powder coated black aluminum frame
• Reinforced seams sewn with a binding
• Comes with a sturdy LAPCO Umbrella carrying case.
• Available in CAMO only
• Stand Not included
D. 7' 9.5oz FIRE RETARDENT CANVAS UMBRELLA
#LAP-UM7FRP . . . . . . . . . . . . . . . . . . . .$180.00
D
7 ft. style features:
• NEW Heavy-Duty powder coated black aluminum frame
• Reinforced seams sewn with a binding
• Comes with a sturdy LAPCO Umbrella carrying case.
• Available in ORANGE only
• Stand Not included
E. UMBRELLA ALUMINUM TRIPOD STAND
#LAP-UMST . . . . . . . . . . . . . . . . . . . . . .$120.00
Stand features:
• Umbrella stand is made from heavy-duty aluminum
• Has a set screw to keep the umbrella from turning.
E
*** All Lapco Work Umbrellas are “Drop Shipped” Directly from LAPCO and have their own separate shipping costs.
If you are purchasing additional items along with a work umbrella, Please call 800-849-4821 Monday-Friday 9 am-5 pm
Eastern Standard Time before placing your order for correct shipping & handling costs.
43
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
PIPEFITTER TOOLS
A. COMBINATION PIPE PATTERNS
• Solve your pipe joining problems easily • 2-piece 90° • orange peel • 45° reducer • 3-piece 90°
• eccentric reducer • concentric reducer • risers • saddles
• bull plug
• Made for pipe 2" through 24".
• Sets available: Small, Medium, and Large.
• LEE's MAGNA PATTERNS #CPM-1: Made of the same rugged heat
resistant material as the Magna Raps. These magnetic patterns will
cling to the pipe like magic. Made for pipes 2" through 8".
Item #
CP-1
CP-2
CP-3
CPM-1
Desc.
2” thru 8” Small set
10” thru 18” Med. set
20” thru 24” Lg. set
2” thru 8” sm. mag. set
Price
$24.00
$25.00
$30.00
$28.00
B
B. STEP PINS
•
•
•
•
•
A
Hard chrome surface prevents wear and corrosion.
Unique step-tapered design for precise fit up.
#B-101 - Hex - Bolt Sizes: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8"
#B-102- Bolt Sizes: 3/4", 7/8", 1", 1-1/8", 1-1/4"
#B-103- For smaller flanges - Bolt Sizes: 3/8", 1/2", 5/8", 3/4"
Item #
B-101
B-102
B-103
Desc.
Lg. Step Alignment Pins
Med. Step Align. Pins
Sm. Step Align. Pins
Price
$55.00
$51.00
$45.00
C. TAPERED PINS #T-250 . . . . . . . . . . . . . . .$30.00
C
• For fabricating pipe with flange fittings.
• For bolt sizes 1/2" thru 1-1/4"
• Molded from high impact nylon
D. TWO HOLE PINS
• 'Quick Release Knob' eliminates tedious turning.
• Also available in threaded knob model TRP.
Item #
QRP
TRP
Desc.
Quick Release Pins
Threaded Release Pins
D
Price
$65.00
$65.00
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
44
PIPEFITTER TOOLS
Prices subject to change without notice
A. RAPAROUND
A
*printed
layout on
R-12 &
R-18
ONLY
No printed
layout
• Can be used as a straight edge, square and scale. Precision cutting gives a
smooth, clean, long-lasting edge for marking.
• Made of rugged, heat-resistant material, all printing in dense black.
• It has layouts for 3, 4, 5, & 6 piece 90 degree elbows, decimal equivalents,
protractor and other useful info. Applies to R12 & R18 only.
• Little Helper: 4" x 60" (10 x 152 cm). Standard & Metric rulers.
• Master Helper: Made of heavy gauge material, heat resistant, thicker and
more durable. 5 3/4" x 60" (15 x 152 cm). Standard & metric rulers included.
* R12 & R18 are the only wraps with printed layouts and other useful info.
Item #
R-6 (med. gauge)
R-12* (med. gauge)
R-18* (heavy gauge)
R-24 (heavy gauge)
R-36 (heavy gauge)
R-48 (heavy gauge)
R-60 (heavy gauge)
Desc.
Mini 2.5” x 48”
Little 4” x 60”
Master 5.75” x 60”
Big Inch 7” x 90”
Big Inch 7” x 120”
Big Inch 7” x 150”
Big Inch 7” x 190”
Price
$10.00
$14.00
$16.00
$18.00
$22.00
$24.00
$30.00
B. MAGNA RAPAROUNDS
• Magna Raps: Flexible magnetic Raparounds for use with pipe up to 48"
New high-tech material is self-aligning and "hugs" the pipe.
B
Item #
M-6
M-12
M-18
M-24
M-36
M-48
Desc.
Mini Mag 3” x 48”
Magna Helper 4” x 60”
Magna Master 6” x 60”
Mag Big Inch 6” x 90”
Mag Big Inch 6” x 120”
Mag Big Inch 6” x 150”
Price
$12.00
$18.00
$20.00
$25.00
$28.00
$35.00
C. RAPATEMP
• Engineered and pre-cut for easy layout of most common miter & saddle cuts.
• RapaTemps are full circumference guides with self-locking velcro tabs. Tough,
durable, heat-resistant material means years of use.
• Available for each pipe size 2" thru 10", every set contains 3 miter
templates (22 1/2°, 45°, 90°) & two saddle templates (45°, 90°).
C
Item #
RT-2
RT-2.5
RT-3
RT-4
RT-6
RT-8
RT-10
Desc.
2” Rapatemp set
2.5” Rapatemp set
3” Rapatemp set
4” Rapatemp set
6” Rapatemp set
8” Rapatemp set
10” Rapatemp set
Price
$22.00
$25.00
$25.00
$28.00
$32.00
$33.00
$35.00
Desc.
2”- 4” Sm Saddle set
6”-10” Lg. Saddle set
Price
$18.00
$20.00
SADDLE SETS
Item #
SS-1
SS-2
45
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
WELDER / PIPEFITTER TOOLS
5A.
Q. C. WELDERS GAUGE
• Measures inside “Hi-Lo” and welding gap.
• Available in Metric and English
A
ENGLISH #D253E . . . . . . . . . . . . . . . . . . .$35.00
METRIC #D253M . . . . . . . . . . . . . . . . . . .$35.00
B
B. PIT DEPTH GAUGE #D254 . . . . . . . . . . . . .$18.00
• This accessory gauge mounts on the Q.C. Gauge.
• Measures pit depth, weld height, and “Hi-Lo”.
• Q.C. Gauge sold separately.
C. SMALL PROTRACTOR 18"/457mm
#DK-239 . . . . . . . . . . . . . . . . . . . . . . . . .$55.00
• Has a base arm measuring 12” (305mm) and an adjustable arm
measuring 18” (457mm).
• The 12” arm has one side etched with 0”- 12” ruler graduated in
1/16” & the other side etched in millimeters to 10 centimeters.
• One side of the 18” arm is etched with a 0”- 18” ruler graduated in
1/16” & the other side etched in millimeters to 15 centimeters.
• Made of Stainless Steel
C
D
D. MINI PROTRACTOR #DXX-250 . . . . . . . . . .$20.00
• Measures angles and features a four-inch scale.
• Ideal for measuring bevel angle on pipe ends.
E. SPACING WEDGES
• The spacing wedges spreads pipe to set welding gap.
• All sizes have maximum thickness of 1/4” & tapers to a knife edge.
• Made of spring steel, hardened to “40’42” “RC”.
E
8 x 11/2 x 1/4 #D271 . . . . . . . . . . . . . . . . . .$25.00
31/2 x 11/2 x 1/4 #D272 . . . . . . . . . . . . . . . .$20.00
F. EZ-FIT PORTABLE CLAMPS
Designed for the welder who needs to align but not reform the pipe.
• FAST EASY SET-UP - Clamp can be slid onto the end of the pipe
and the handle turned for fast easy alignment.
• NO TRAINING - Clamp requires no training to operate.
• ADAPTABLE - Can be used on stainless, specialty alloy
pipe or tubing.
• “HI-LO” - Wing screws turn in/out to adjust pipe alignment.
Item #
E-z12ss
E-z2ss
E-z4ss
E-z8ss
Pipe Size Range
9-12” / 229-305mm
1-2.5” / 25-64mm
2.5-5” / 64-114mm
5-8” / 127-203mm
F
Price
$590.00
$225.00
$250.00
$375.00
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
46
WELDER / PIPEFITTER TOOLS
Prices subject to change without notice
A. FLANGE LINE UP PINS (FLUPS)
• A pair of Flange Line Up Pins and a spirit level will set precise
two-hole horizontal alignment for welding flange assemblies.
• Cone shaped end piece automatically centers on the bolt holes.
• Expansion springs allow pins to give as flanges expand during
heating.
• 2 STYLES - COME IN PAIRS:
A
SLIDELOCK LOCKING SET #05-0100-000 . .$140.00
WOBBLE NUT SET #05-0100-010 . . . . . . .$140.00
B. PIPEFITTERS SQUARE #D248 . . . . . . . . .$120.00
• Marked with information to make or measure arcs, angles,
tangents, saddles, miters, diagonal joints and Y joints.
• Use it to determine pipe center line, bolt length for flanges,
number of required bolt holes for flanges, and pipe
circumference.
• Measure drop of inches per foot for pipe angle in degrees.
• Square is 15-1/2”x24” Complete with operating manual.
B
C. FRAMING SQUARE
• Blade lengths 8-12”, made from Stainless Steel.
• Used to measure squareness and angles.
• Used with a level, these squares can measure drop per foot to
determine degrees, squareness of one point to another, and pipe
centerline.
• Measurement is in 1/8” increments.
SMALL SQUARE #D256 (Stainless) . . . . . .$40.00
C
D. MINI FIT CLAMP #D230 . . . . . . . . . . . . . .$360.00
D
47
(Fits 1/4" to 4" pipe)
Mathey Dearman’s Mini Fit Clamp is the fledgling son of the Chain
Clamp design family. Modeled after its sibling the Single Jackscrew
Chain Clamp, the Mini Fit is the perfect tool for aligning small
diameter tubes, pipes, and fittings.
• The clamp is extremely lightweight and easy to set up and adjust
(no special tools required).
• Brass jackscrews are designed to avoid pipe marking and
scarring and stainless steel versions are also available.
• Add or remove chain and jackbars as needed for larger or
smaller pipes.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
SAFETY GLASSES
Prices subject to change without notice
TRI-WEAR® SERIES FROM CREWS
180 Degrees Of Clear Vision • Single Aspheric Lens Design • Lifetime Frame Warranty
• Bayonet Temple Design • Gel Nose Piece • Filters 99% of U.V. Radiation • Meets or Exceeds ANSI Z87.1 Safety
Standards • Each TriWear® comes standard inside a soft silk carrying case.
T1117
T11150
T1119AF
T1148B
T1149AF
T114G
Item #
135-T1117
135-T11150
135-T1119AF
135-T2112AF
135-T1148B
135-T1149AF
135-T114G
135-T114R
Frame Type
ONYX Frame
ONYX Frame
ONYX Frame
ONYX Frame
STEEL Frame
STEEL Frame
STEEL Frame
STEEL Frame
T2112AF
T114R
Desc.
Silver Mirror
IR5.0 Green Lens
Clear Anti-Fog
Grey Anti-Fog
Blue Diamond Lens
In/Out Clear Mirror
Emerald Lens
Fire Lens
Price
$12.00
$14.00
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
HARLEY-DAVIDSON® SAFETY EYEWEAR FROM BACOU DALLOZ
• Impact resistant polycarbonate lenses. • 99.9% UV protection • Scratch resistant hardcoat
• Made in the USA • Meets ANSI Z87.1 safety standards.
B
A
D
E
H
F
J
I
L
A.
B.
C.
D.
E.
F.
G.
#883-HD100
#883-HD101
#883-HD102
#883-HD103
#883-HD503
#883-HD604
#883-HD800
C
. . . . . . . . . . . . . . . . .$18.00
. . . . . . . . . . . . . . . . .$10.00
. . . . . . . . . . . . . . . . .$12.00
. . . . . . . . . . . . . . . . .$14.00
. . . . . . . . . . . . . . . . .$20.00
. . . . . . . . . . . . . . . . .$14.00
. . . . . . . . . . . . . . . . .$18.00
G
K
M
H.
I.
J.
K.
L.
M.
#883-HD801 . . . . . . . . . . . . . . . . .$18.00
#883-HD802 . . . . . . . . . . . . . . . . .$18.00
#883-HD1000 . . . . . . . . . . . . . . . .$20.00
#883-HD1001 . . . . . . . . . . . . . . . .$16.00
#883-HD1002 . . . . . . . . . . . . . . . .$18.00
#883-HD1003 . . . . . . . . . . . . . . . .$20.00
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
48
SAFETY GLASSES
SMITH & WESSON® CODE 4 SAFETY EYEWEAR
• Scratch Resistant polycarbonate lens • Ribbed, non-slip rubber nose cushion
• Contoured temple tips for precise fit • Hinge stops help to prevent lens damage
• Lightweight - weighs less than an ounce
624-3011685
624-3011687
#624-3011685 . . . . . . . . . . . . . . . . . . . .$16.00
#624-3011687 . . . . . . . . . . . . . . . . . . . .$12.00
624-3011688
624-3011690
#624-3011688 . . . . . . . . . . . . . . . . . . . .$16.00
#624-3011690 . . . . . . . . . . . . . . . . . . . .$12.00
SMITH & WESSON® EQUALIZER™ SAFETY SPECTACLES • Soft rubber nose pads
• Sport grip temples • Dual lenses with 8-base curve for wrap-around protection • Lens options include
anti-scratch or anti-fog coating • Micro-fiber carry pouch • High performance polycarbonate lens provides
99.9% UV protection • Exceeds the "High Impact" level of the ANSI Z87.1+ safety standards
624-3016307
624-3016308
624-3016309
624-3016310
Item #
624-3016307
624-3016308
624-3016309
624-3016310
624-3016311
624-3016311
Frame Type
GUNMETAL Frame
GUNMETAL Frame
GUNMETAL Frame
RED Frame
BLUE Frame
Desc.
Clear Anti-Fog Lens
Smoke Anti-Fog Lens
Indoor/Outdoor Clear Lens
Amber Lens
Blue Mirror Lens
Price
$10.00
$10.00
$10.00
$10.00
$10.00
SMITH & WESSON® ELITE SAFETY SPECTACLES • Dual lenses with an 8-base curve that
provides wrap-around protection • Lens options Anti-Scratch or Anti-Fog coating • Micro-fiber carry
pouch • High performance polycarbonate lens provides 99.9% UV protection • Exceeds the "High Impact" level
of the ANSI Z87.1+ safety standards
624-3016312
Item #
624-3016312
624-3016313
624-3016314
624-3016315
624-3016316
49
624-3016313
624-3016314
Frame Type
BLACK Frame
BLACK Frame
BLACK Frame
BLACK Frame
BLACK Frame
624-3016315
Desc.
Clear Anti-Fog Lens
Smoke Anti-Fog Lens
Amber Lens
Indoor/Outdoor Clear Lens
Blue Mirror Lens
624-3016316
Price
$10.00
$10.00
$10.00
$10.00
$10.00
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
SPECIALTY TOOLS - NO DOGS - BOILER BUCKET
A. TWO HOLE PINS (Set of 2 Pins)
Available in Stainless Steel or Brass
• Standard Size Fits Flanges up to 30" & Fits hole sizes up to 1½"
• Mini Pins Fit Flanges up to 6" & Fits hole sizes up to 1"
• Made in the USA
Item #
PD2HPL-S
PD2HPL-B
PD2HP-S
PD2HP-B
Desc.
SS 2 Hole Pins
Brass 2 Hole Pins
Mini-SS 2 Hole Pins
Mini-Brass 2 Hole Pins
A
Price
$70.00
$70.00
$55.00
$55.00
B. NO DOG OFFSET LEVEL #ND6 . . . . . . . . . . .$16.00
• This handy device eliminates “dog legs” in offsets and saddles.
• Precision tool made from lightweight, durable aluminum,
heat treated for extra strength.
• Compact - can be carried in any pocket or clamped to your hardhat, tool pouch or clothing. • Measures 1/2” x 1” x 2”
• Can be used for a spacer with multiple runs of conduit.
• Comes in Blue, Gold, Silver, Green, Red, Orange, Purple & Black
• Color choice based on availability.
B
C
C. NO DOG 6” LEVEL
• Machined from 6061 aluminum bar stock.
• Unique pocket conduit bending level houses 5 precisely handset
acrylic vials. Each level contains level and plumb, plus 3
commonly used bending angles and their multipliers.
• Comes in Blue or Red
45o, 30o, 15o LEVEL #ND7 . . . . . . . . . . . . . .$45.00
D
SPX
D. OTC CHROME “JIMMY BAR”
• OTC Round Jimmy Bars are forged from chrome alloy steel and
heat-treated to resist bending and breaking.
Item #
OTC7166
OTC7167
OTC7168
Desc.
5/8” dia - 18” long
3/4” dia - 24” long
7/8” dia - 30” long
Price
$28.00
$35.00
$40.00
E
E. Custom Aluminum Diamond Plate Boiler Bucket
#BB-1..............................................$199.95
• 11.5” x 11.5” x 18” D - Fits thru Boiler Manholes!
• Made from .063 Diamond Plate Aluminum Sheet,
corrosion resistant, light weight & extremely durable
• Stainless steel keyed lock!
• Water resistant in upright position
• Square design offers two seat heights
For more info on this item visit our website: www.thegangbox.com
Due to the large size of
this item:
Please call 800-849-4821
M-F, 9am-5pm EST before placing
your order for correct shipping
& handling costs.
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
50
FLASHLIGHTS
LED and C4® LED
Streamlight Takes LED Technology To A Whole New Level
Streamlight has played a major role in adapting LED technology to portable lighting tools. Basic LEDs provide a
number of significant advantages:
• LEDs use less power so the batteries last longer • Have an almost infinite life - between 50,000 and 100,000
hours • Are virtually unbreakable since there is no glass or filament.
C4 LED produces brilliant, powerful, blinding light that is brighter than a high-intensity LED. Our Streamlightengineered reflector creates an intense beam that pierces the darkness. You get the long run times and
indestructibility of an LED combined with an increased level of brightness that leaves other LEDs in the dark.
Strion LED Rechargeable Flashlight with AC/DC
• 3 levels of lighting: High, Medium, Low plus Strobe function
• Run times vary from 2 hours up to 7.5 hours
• Produces up to 160 lumens
• Fully charged in just 3 hours
Ultra-compact, rechargeable flashlight featuring a super bright C4 LED.
LED has a 50,000 hour lifetime and is impervious to shock. Constructed of
machined aluminum with grooved barrel and unbreakable polycarbonate
lens. Rechargeable up to 300 times. Clamp style charger holder with digital
control circuit prevents overcharge. Charges in just 3 hours.
Lithium Ion battery. 5.9" L.
Strion LED Flashlight
Strion LED Flashlight
Strion LED Flashlight
Strion LED Flashlight
Strion LED Flashlight
Purple #STL74349 ....................$149.95
Orange #STL74347 ....................$149.95
Green #STL74345 .....................$149.95
Blue #STL74343 .......................$149.95
Red #STL74341 ........................$149.95
Strion LED Rechargeable Flashlight with AC/DC Holder (Pink)
Same great features as the other Strion LED Rechargeable Flashlights
but, For every Pink Strion LED sold, Streamlight will donate $5 to
the Breast Cancer Research Foundation®
• Strion LED Flashlight Pink #STL74350 ......................$149.95
Stylus Pro LED Penlights
• Compact, waterproof, durable construction
• LED has a 30,000 hour lifetime
• Micro Optical System (MOS) for optimized output & 7.5 hour run time
• Shock proof, drop test verified above the standard industry of 6 feet
• Unbreakable pocket clip and key ring for easy storage/attachment
Stylus™ Pro LED Penlight features an internal polymer body liner and
shock proof switch housing. Unbreakable polycarbonate lens and Type II
MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum body.
Includes (2) AAA alkaline batteries and a holster. 5.3" in length and weighs
1.64 oz. Limited lifetime warranty.
Stylus Pro LED Penlight Orange #STL66128 ...................$26.95
Stylus Pro LED Penlight Lime Green #STL66129 .............$26.95
Stylus Pro LED Penlight Silver #STL66121 ....................$26.95
Stylus Pro LED Penlight Blue #STL66122 ......................$26.95
Stylus Pro LED Penlight Black #STL66118 .....................$26.95
51
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
FLASHLIGHTS
Twin Task 3C UV Titanium Flashlight
• Durable, anodized machined aluminum flashlight featuring 5 white LEDs,
Xenon and Laser lighting
• Xenon/Laser mode provides adjustable focus
• Push button switching, knurled grip and lanyard are standard
• The five 100,000 hour LEDs deliver up to 21 lumens for up to 100 hours
• The Xenon/Laser mode delivers up to 5 hours
• Useable laser range is 100+ yards and up to 100ft in laser/xenon position.
• Uses 3 "C" Alkaline batteries. • 9.02 in. L; 1 lb.
• LEDs never need replaced - saves money on not having to replace bulbs.
• Twin Task 3C UV Titanium Flashlight #STL51018 .....................$49.95
Nano Light - Micro Miniature LED Light
• Micro miniature size - easy to use on key ring, coat zipper or D-ring
• LED never needs replaced - 100,000 hour lifetime
• LED delivers up to 10 lumens - bright for its small size
• Parabolic shaped LED area optimizes beam performance
• Easy to use rotating "on-off" head
• Nano Light BLACK Flashlight #STL73001 ...............................$9.95
• Nano Light BLUE Flashlight #STL73001 ...............................$10.95
For every Blue Nano Light sold, Streamlight will donate $1 to
“Concerns of Police Survivors, Inc.”
Ultra-Small Streamlight Jr. Luxeon-LED #71500 . . . . . . . . .$35.00
• The ultra-small, lightweight with a Luxeon LED. • The brightness of
an incandescent bulb, plus an LED that runs 50,000 hours. • Machined aluminum construction,
unbreakable polycarbonate lens
STINGER ACCESSORIES
12 Volt DC (car) Cigarette Lighter Charge Cord #22051 . . . . . . . . . . . . . . . . . . . . . . . .$12.00
• 12 volt DC (car)Charge Cord fits all Streamlight rechargeable cradles, holders & sleeves
120 Volt AC (home) Charger Cord #22311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.00
• 120 volt AC (home)Charge Cord fits all Streamlight rechargeable cradles, holders & sleeves
Replacement Battery Stick #75175 . . . . . . . . . . . . . . . . . . . . . . .$18.00
• Replacement Battery Stick (Fits Streamlight Stinger, Stinger HP, Stinger XT & Stinger XT HP
Stinger Piggyback Charger Holder #75275 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.00
• Stinger Piggyback charger holder • Extra battery • Charges flashlight/extra battery at the same
time • Piggyback charger is sold w/o charger cords • AC 120v & DC 12v cords sold separately
Stinger Replacement Bulb #75914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.00
• Fits Stinger, Stinger XT & PolyStinger
Stinger Lens/Reflector Assembly #75956 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.00
• Fits Stinger, Stinger XT & SuperStinger
Stinger Upgrade HP Kit #78004 . . . . . . . . . . . . . . . . . . . . . . . . . .$30.00
• Increases candlepower from 15,000cp to 40,000cp
Stinger Deluxe Nylon Holster #76090 . . . . . . . . . . . . . . . . . . . . . . $15.00
• Fits the Stinger, Stinger XT & Poly Stinger
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
52
TILLMAN
TM
WELDER GEAR
Prices subject to change without notice
A
A. WELDING JACKET
•
•
•
•
•
We Weld America Saluting America's Welders.
30" length, Green 9 OZ Westex Proban FR-7A Cotton Fabric
Protects from sparks, light molten splash & sudden flame exposure
Cool comfortable and washable
Vibrant "We Weld America" Design logo on the back
Medium: 42-44 • Large: 46-48 • X Large: 46-48
XX Large: 50-52 • XXX Large: 54-56
Item #
Till-9030-M
Till-9030-L
Till-9030-XL
Till-9030-2XL
Till-9030-3XL
Disc.
Medium
Large
X Large
XX Large
XXX Large
Price
$26.00
$26.00
$26.00
$28.00
$30.00
B. WELDERS GEAR & HELMET BAG
#Till-520 . . . . . . . . . . . . . . . . . . . . . . . . .$14.00
• Made from tough 600 denier coated polyester
• Large capacity main compartment with drawstring closure, holds
all welding helmets including safety shields
• Front pocket with hook and loop closure, 2 mesh side pockets
can hold welding gloves up to 14" or water bottles
• Adjustable shoulder strap
B
C. LEATHER ROD BAG #Till-525 . . . . . . . . . . . .$8.00
• Made of side split cowhide
• Reinforced bottom • Spring clip
• Sewn with Kevlar® for extra strength • 14" H x 3½" W
D
E
D. FOAM KNEE PADS #Till-565....................$19.95
• Polypropylene cap • Velcro® elastic straps
E LEATHER KNEE PADS #Till-562................$14.00
• Leather knee pads with heavy rubber insert.
F
F. PIGSKIN SWEATBAND #Till-569 ................$6.00
G
#560
• Pigskin Leather • 8½" x 3¼"
G. SHEEPSKIN HEADGEAR PAD
#Till-560 (6 ¾" Wide x 4 ¼" High) .....................$6.00
#Till-561 (7" High x 5" Wide Ratchet Adjustor Hole) ....$6.00
#561
53
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
FLAME RETARDANT JACKETS & SLEEVES
TILLMAN
Jackets Maintain Flame Resistance for up to 50 Home Washings!
Medium: 40-42 • Large: 44-46 • X Large: 48-50
XX Large: 52-54 • XXX Large: 56-58
TM
A
A. FLAME RETARDANT COTTON JACKET
#Till-6230V • Color: Green
• 30" Length • Velcro® Closure
• 12 oz., 100% Cotton, Fire Retardant fabric with Proban® FR7A®
Item #
Till-6230V-S
Till-6230V-M
Till-6230V-L
Till-6230V-XL
Till-6230V-XXL
Till-6230V-XXXL
Disc.
Small
Medium
Large
X Large
XX Large
XXX Large
Price
$24.00
$24.00
$24.00
$24.00
$28.00
$30.00
B. WELDING SLEEVES #Till-6217 . . . . . . . . . .$8.00
• 18" length, 9 oz., green firestop cotton sleeves with 2 ½"
elastic at both ends.
• Made from flame retardant, 100% cotton Proban® FR7A®
• Washable.
• Offers protection from sudden flame exposure, light
molten splash and sparks.
B
C
C. LEATHER HELMET BIB
#Till-566 (Attaches w/Metal Clips) .....................$6.00
#Till-567 (Attaches w/Velcro ) ........................$5.00
®
• Cowhide Split Leather • 8" High x 8" Wide
F. Elkskin Welding Gloves #Till-750 .............$18.00
D
• 14" Length • Straight thumb, for best gun grip
• Top grain premium pearl elkskin stays soft even when hot.
• Welted fingers protect stitching • Foam lined back, unlined
palm. • Lock stitched with Kevlar® thread for added
strength.
Sizes Small - X-Large = $18.00 • 2X-Large = $20.00
G. HERITAGE SERIES WELDING GLOVES
#Till-850 ...........................................$20.00
E
• 14" length • Reinforced thumb • Foam back, unlined palm
• Premium top grain gold elkskin stays soft even when hot
• Welted fingers protect stitching
• Locked stitched with Kevlar® thread for added strength
Sizes: Small, Med., Large & X-Large
Prices subject to change without notice
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
54
TRADE BOOKS & TRAINING MANUALS
ELECTRICIAN BOOKS
A. ELECTRICIAN’S GUIDE TO CONDUIT BENDING
#EL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95
• (By Richard A. Cox) -This is the most complete book on conduit bending
published to date. It’s written like a textbook with example, sample problems and
over 150 photographs and illustrations. The book includes sections on EMT, rigid
steel aluminum, IMC and PVC conduit. All bending methods: hand, mechanical,
hydraulic (segment and concentric) and heat bending PVC are covered.
A
B. ELECTRICIAN’S GUIDE TO AC MOTOR CONTROLS
#EL3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95
B
• (By Richard A. Cox) -Second Edition. This Edition contains 18 chapters (265 pgs)
of fully illustrated diagrams and charts that explain practical approaches and theory
needed to understand basic AC motor controls. Charts and sections of the 2005
National Electrical Code are used along with standard electrical symbols, troubleshooting guide and an index.
C. UGLY’S ELECTRICAL REFERENCE BOOK #EL1 . . . . . . . . .$19.95
• (By George V. Hart)) - This book is designed to be used as a quick on-the-job
reference guide in the electrical industry. We have tried to include the most commonly required information in an easy to read format. The book is pocket size, spiral
bound. The book is written on high quality glossy paper to prevent dirt, grease &
water stains.(Complete Ugly’s Electrical Series available online at: www.thegangbox.com)
C
HEAVY EQUIPMENT BOOKS
D. Mobile Cranes- Fifth Edition #MNL11 . . . . . . . . . . . . . .$29.95
• (By James Headley) - The most up-to-date publication available on mobile cranes.
Topics include: conditions that reduce lifting capacities, understanding load charts,
pre-op inspection, crane setup, working around power lines, operating procedures,
hoisting personnel, and more. A training program in itself. Excellent preparation for
operators taking licensing and certification exams.
D
E. Forklifts - Second Edition #MNL21 . . . . . . . . . . . . . . . .$20.95
E
55
• (By James Headley) - This pocket-size guide provides operators, managers and
safety professionals with the tools to identify and control lift truck hazards. Details
training requirements, physical principles, lifting, moving, and placing loads in various operating environments. In addition, this handbook provides sample safety
checklists for pre-operational inspection and lift planning.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
TRADE BOOKS & TRAINING MANUALS
INSTRUMENTATION BOOKS
A. PURDY’S INSTRUMENT HANDBOOK #IT1 . . . . . . . . . . . .$14.95
• (By Ralph Dewey) - This book represents years of instrument experience and
know-how. It contains notes, examples, procedures, hook-up drawings and tables.
The author’s purpose was to make a quick reference field book, rather than a text
book.
A
B. DEWEY’S INSTRUMENT TROUBLESHOOTING HANDBOOK
#IT2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.95
• (By Ralph Dewey) -This pocket-sized spiral book contains startup and checkout
pointers and fundamentals, tricks of the trade, instrument failsafe considerations,
plenty of troubleshooting techniques, safety tips and examples of case histories.
B
C. PURDY’S INSTRUMENT HANDBOOK 2 #IT3 . . . . . . . . . .$14.95
• (By Ralph Dewey) - The Companion Book to #IT1. "Quick Reference" information.
Additional notes, Examples, Drawings, Formulas, Loop Designs,Educational material
and other references
C
IRONWORKER / RIGGER BOOKS
D. BOB’S RIGGING & CRANE #B-2 . . . . . . . . . . . . . . . . . . .$24.00
• (By Bob De Benedictis) - Primarily developed for the construction industry, this
handbook contains: Rigging Information • Crane Operations • Wire Rope Data •
Sling Details • Inspection Criteria • OSHA Regulations • Industry Standards • Weight
Calculations • Center of Gravity Determinations • Critical Lift Parameters • Plus
Much More • Pocket Size: 4.5” x 6”
D
E. RIGGING #MNL12 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.00
• (By James Headley) - This handbook contains the latest up-to-date information on
wire rope, rigging hardware, slings, and includes capacity tables and charts. This is
a must have handbook for anyone who works with cranes and rigging. An excellent
text that is practical, organized and has great illustrations that makes it easy to
understand and apply.
E
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
56
TRADE BOOKS & TRAINING MANUALS
Prices subject to change without notice
IRONWORKER / RIGGER BOOKS
A. Wire Rope Users Manual #MNL06 . . . . . . . . . . . . . . . .$52.95
A
• Written and published by the Wire Rope Technical Board, this manual is the most
comprehensive and in-depth discussion on wire rope published. Topics include:
basic components, handling and installation, operation, inspection and maintenance
of wire rope. In addition, capacity charts for all commonly used types of wire rope
are included.
B. Wire Rope Sling Users Manual #MNL05 . . . . . . . . . . . .$52.95
B
• Written and published by the Wire Rope Technical Board, this companion volume
provides a thorough treatment of the following areas: glossary of wire rope sling
terms, useful guidelines for riggers, turning loads with slings, capacity charts for all
types of wire rope slings, rigger's checklist, crane hand signals, and how to care for
wire rope slings. Both books are a must for anyone whose job involves the use of
wire rope and wire rope slings.
MILLWRIGHT BOOKS
C
C. THE HANDBOOK OF TECHNICAL SKILLS FOR MILLWRIGHTS AND
MECHANICS #MW1 ...............................................$14.95
• (By Bill Bettison) - The handbook of technical skills for industrial millwrights
and machinists. The book contains rim & face formulae, plotting board methods
double reverse formulae, self leveling instruments, electronic theodolites, slope /
intercept methods, thermal growth formulae in conjunction with double reverse
introduction to vibration and much more. The “bible” of technical information for
anyone interested in learning more about the trade.
• NEW!! Book PLUS Companion Disc of Mathematic Formulae
#MW2 (Book & CD) ..............................................$19.95
#MW3 (CD Only- You must have Xcel to use this disc) ......$9.95
PIPEFITTER BOOKS
D
D. THE PIPEFITTERS BLUEBOOK #PBB1 . . . . . . . . . . . . .$25.00
• (By W.V. Graves) - This is the most commonly used pipe book in the trade
today. It’s a pocket size book with a water resistant cover for durability. Known as
the pipe bible, this book illustrates: solving rolling offsets, centers of 15o, 221/2o &
60o butt weld elbows cut from 90 degree elbows. It also contains layout for True
“Y” layout, common pipe angles & solutions, special offsets and solutions,
mitered pipe cuts, multipiece mitered turns and more...
E. THE PIPE FABRICATOR’S BLUEBOOK #PBB2 . . . . . . . .$25.00
E
57
• (By W.V. Graves) - This book is the companion to the Blue Book with the
same water resistant cover and is also pocket size. Contains ordinates for schedule 10 & 20 risers, standard weight risers, extra strong risers, concentric tee
ordinates STD & XS & dummy leg support on 90 degree L.R. Elbows.
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
Prices subject to change without notice
TRADE BOOKS & TRAINING MANUALS
PIPEFITTER BOOKS
A. THE PIPE FITTER’S & PIPEWELDERS HANDBOOK
#PBB3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.00
• (By T.W. Frankland) - Clearly written and well illustrated, this hip-pocket,
ready reference contains information needed by both the student and the worker
in the field. This handy book is organized into four major sections: Basic Trade
Mathematics, Pipe Fitting Calculations, Pipe Welding Layout, Reference Table.
A
B. PIPE TRADES POCKET MANUAL #PBB4 . . . . . . . . . . .$26.00
• (By T.W. Frankland) - This pocket sized reference contains complete calculation tables for pipe bends, pipe offsets, miter turn fittings, welding elbows offsets and fabricating odd-angle offsets. It also explains how to solve angles with
a steel square and with a watch. A section on basic mathematics and seven
reference tables are included.
B
C. PIPE TEMPLATE LAYOUT #PBB5 . . . . . . . . . . . . . . . . $26.00
• (By T.W. Frankland) - Detailed guide to making templates used in cutting
pipes including drawing practice, dividing lines, angles, circles and the use of
irregular curves. Instruction for making pipe templates for 15 different variations
of cuts are included.
C
D. ORDINATES FOR 1000 PIPE INTERSECTIONS
#PBB6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.00
• (By S.D. Bowman) - Contains tables of cut back lengths for 100 schedule 20
schedule and 40 schedule 80 pipe intersections of the following types: 90°, 45°,
30° and 221/2 degree as well as eccentric and back of elbow intersections.
D
E. MODERN METHODS OF PIPE FABRICATION
#PBB7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.00
• (By S.D. Bowman) - Contains ordinates for 250 pipe intersections. Right triangle applied to piping offsets, solutions of rolling offsets and special offsets.
How to figure and lay out miter cuts, dimensions of commonly used pipe fittings, 100 abbreviations used in piping trade, formulas and other information
useful to the pipefitter in his everyday work.
E
F. SELECTED PIPING PROBLEMS #PBB8 . . . . . . . . . . . . .$15.00
• (By S.D. Bowman) - This book is for those who want to know a little more
about piping offsets and intersections. The book contains information on solving
offsets with degree of elbows unknown, solving 45 degree rolling offsets,
solving special rolling offsets, solving special tank offset and much more.
F
G. OFFSETS MADE EASY #ULT1 . . . . . . . . . . . . . . . . . . .$29.95
• (By R.L. “Bulldog” Eisenbarth) - Was designed to simplify angles and offsets to
where the beginner as well as the novice will understand how easy it is to layout
and understand offsets. It contains chapters on:
• Methods for Squaring Up a 7.5 .thru 90° Turn • Methods for Mitering Pipe
in Quarters for 7.5 thru 90° Turn • Methods for Mitering Pipe in Eights for
7.5 thru 90° Turn • Methods for Known and Unknown Angles • Plus More!
G
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
58
TRADE BOOKS & TRAINING MANUALS
PIPEFITTER BOOKS
A. TEMPLATE & LAYOUT PATTERN BOOK #ULT2 . . . . . .$59.95
• (By R.L. “Bulldog” Eisenbarth) - Bulldog created this book with over 10,000
formulas to create over 1,600 templates that simplify the everyday tasks of pipe fabrication. Book over 500 pages, comb bound to open and lay flat! • The front of each
section shows you the formulas for figuring that type of template.
• Span Distance Chart for Dummy Legs • Pipe Data by Wall Thickness & Weight
• $59.95 + $8.50 S&H
A
B. TEMPLATE & LAYOUT PATTERN BOOK #ULT3 . . . . . . . .$19.95
• (By R.L. “Bulldog” Eisenbarth) - For pipefitters and welders to simplify angles and
offsets so the beginner and the novice will understand how easy it is to layout and
understand offsets. Contains all of the charts for fittings, flanges, gaskets, etc. up to
42" and 48" that you should need. Designed to assist pipefitters & welders with all the
information they need in a handy pocket book.
B
SAFETY BOOKS
C. Construction Foreman's Safety Handbook #MNL07 . . .$45.00
• (By George Kennedy) - This book was written to help managers, supervisors
and foremen understand the basic components of a safety program and what
they can do to prepare for a very important part of their job - accident prevention!
C
D. Hoisting & Rigging Safety Manual #MNL13 . . . . . . . .$59.95
• This manual identifies the basic hazards in rigging and hoisting, explains the
safeguards necessary to control or eliminate these hazards, and spells out other
safety requirements.
D
E. Scaffolding Safety #MNL16 . . . . . . . . . . . . . . . . . . . .$24.95
• (By The Crane Institute of America) - This handbook presents OSHA's
scaffolding regulations in a clear, understandable format. Illustrations provide
the knowledge to erect frame scaffolding in compliance with federal regulations.
Describes major types of metal frame scaffolding and their use; details potential
hazards associated with scaffolding erection and provides remedies. Safety
checklists and scaffolding exercises are included to use in scaffold training.
TAX LOG BOOK
E
F. TAX LOG BOOK #TLB-1 . . . . . . . . . . . . . . . . . . . . . .$12.00
F
• Our Logbook is heavy duty, spiral bound, easy to use. Keep track of ALL your
job related expenses on a daily basis. Mileage, tools, work clothes, hotel, tolls,
etc. Accurate records = tax deductions!
TRAINING DVD
G
G. PIPE FITTING & FABRICATION TRAINING DVD
#PFDVD-1 (DVD) . . . . . . . . . . . . . . . . . . .
. . . . . .$19.95
• For Pipe Fitters, Helpers, Students, Apprentices, or Anyone Wanting to Learn
More About Pipe Fitting. This hands on video is sure to enhance your skills!
• 90 Degree Lateral Offset • Socket Welds • Buttwelds • Miter Cuts • Saddles
• Drawings • 45 Degree Lateral Offsets
Trade Schools - This video is excellent for training and skill enhancement!
The Perfect Companion to our Pipe Fitter Tools & Books!
59
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
WELDING INSPECTION MIRRORS & MAGNETS
A. MAGNETIC PICK UP TOOL #758-9 . . . . . . .$6.00
B
• Made of insulating polypropylene • Virtually unbreakable
• Powerful life-long Alinco V Magnet • Pencil shaped, 6" long
A
B. POCKET TELESCOPIC MAGNETIC PICK-UP TOOL
#758-4T . . . . . . . . . . . . . . . . . . . . . . . .$10.00
• Alnico V Magnets and Molded Nylon Heads
• Extends to 19 ½" yet closes to 4 ½" pocket size
C. FLEX NECK MAGNETIC PICK-UP TOOL
#758-6F . . . . . . . . . . . . . . . . . . . . . . . .$14.00
• Tightly wound flexible shaft of spring tempered steel links
• High power permanent Alinco V Magnet provides lifetime
pulling power • Over length: 17 ½"
C
D
D. MAGNETIC PICK-UP TOOL #758-1SR . . . .$14.00
• The original all-angle magnetic retrieving tool with Molded
Nylon Heads and Alnico V Magnets
• Telescopes 16 ¾" to 26 ¾"
E
E. OVAL POCKET MIRROR #758-B2 . . . . . .$10.00
• 1”x 2” mirror • 8 ½” length overall • Double ball-joint links
swivel mirrors 360º • Made from tempered spring steel
• Original All- Angle Ball Joint Mirrors with brushed stainless
mirror backs
F. RECTANGULAR TELESCOPING MIRROR
#758-K2 . . . . . . . . . . . . . . . . . . . . . . . .$10.00
F
• 2 1/8" x 3 ½" mirror • 8 ½” length overall • Double ball-joint
links swivel mirrors 360º • Made from tempered spring steel
G. CIRCULAR TELESCOPING MIRROR
#758-C2 . . . . . . . . . . . . . . . . . . . . . . . .$10.00
G
• 2 ¼” diameter mirror 10” length - extends to 14”
• Double ball-joint links swivel mirrors 360º • Made from
tempered spring steel • Brushed stainless steel mirror backs
Prices subject to change without notice
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
60
WELDING INSPECTION MIRRORS & MAGNETS
H. MAG BASE INSPECTION MIRROR
#758-MX . . . . . . . . . . . . . . . . . . . . . . . .$30.00
H
• Heavy duty • Extra powerful magnetic base • Mounts and
adjusts in seconds • Quick change 2 1/8" x 3 1/2" replaceable
mirror encased in a rugged stainless steel case
I. LED LIGHTED TELESCOPING INSPECTION MIRROR
#758-HTC-2LT . . . . . . . . . . . . . . . . . . . .$20.00
• 2 3/8" mirror diam • Telescopes 61/2" to 363/8" • Illuminating LED
light • All-angle ball joint holds mirror head firmly • Stainless
steel handle • Two round lithium batteries included
I
J. 24 LED ROTATING MAGNETIC WORK LIGHT
#ULLRT-2LT . . . . . . . . . . . . . . . . . . . . . .$19.95
J
• Sturdy aluminum housing with 24 high intensity LED lights
• Aluminum Lighted Head rotates to adjust beam to needed angle
• Strong magnetic base attaches to any ferrous metal surface
instantly
• Bridges a work light with a high quality flashlight
• Comes with three Energizer AAA batteries
K. 48 LED ROTATING MAGNETIC WORK LIGHT
#ULLRT-48LT.....................................$34.95
K
L
• 48 High Intensity LED's
• Sturdy aluminum red housing
• Rotates 360 degrees and housing pivots to direct light to
desired angle
• Strong magnetic base attaches to any ferrous metal surface
instantly
• Includes (3) AA Batteries
• This work light needs no tools to replace the batteries
L. 24 LED RECHARGEABLE ROTATING MAGNETIC
WORK LIGHT
#ULLRT2-LTCH ..................................$43.95
•
•
•
•
24 High Intensity LED's
Sturdy Aluminum Red Housing that rotates 360 Degrees
Strong Magnetic base attaches to ferrous metal instantly
Rotating head pivots360 degrees to direct light to any desired
angle
• Includes a 110 volt charger
61
Call The Gangbox Toll Free 1-800-849-4821 • Order Online at: www.thegangbox.com
SLEDGE & BALL PEIN HAMMERS
A. WORLD'S MOST DURABLE BALL PEIN HAMMER!
•
•
•
•
•
Unbreakable™ Handle Technology: Steel core design prevents breaking during overstrikes
Hi-Vis green easily identifiable on jobsite and flat head to stand upright for easy reach
Safety plate locks head firmly to handle eliminating head dislodging
Non-slip grip textured handle and Lanyard hole to safely secure sledge to your wrist
Anti-vibe neck ergonomically designed to prevent injury from repeated jobsite use
24oz Head - $45.95
#WIL32414
Length - 16 inch
Net Weight - 2 pound
Handle Length - 14 "
Head Weight - 1½ Lbs
32oz Head - $50.95
#WIL33214
Length - 14 inch
Net Weight - 2.5 pound
Handle Length - 14 "
Head Weight - 2 Lbs
40oz Head - $55.95
#WIL34014
Length - 15.5 inch
Net Weight - 3 pound
Handle Length - 14 "
Head Weight - 2½ Lbs
B. THE WILTON B.A.S.H (Bad Ass Sledge Hammer)
The Wilton BASH Unbreakable Sledge Hammer is the toughest sledge ever built.
With molten steel bars reinforcing the handle, and a locking steel plate holding the
head to that handle, the BASH will hold up when you need it most.
Tested to 25,000 overstrikes, the BASH puts traditional wood and fiberglass
hammers to shame!
• Unbreakable™ Technology: Steel core design prevents breaking during
overstrikes
• Hi-Vis Green Head: Adds instant identification under any job site conditions
• No-Slip Grip: Textured handle for secure grip while striking
• Safety Plate: Locks head firmly to handle eliminating dislodging
• Flat Head: Conveniently designed to stand upright for easy reach
• Anti-Vibe Neck: Designed to prevent injury from repeated job site use
• Lanyard Hole: Safely secure sledge hammer to your wrist
2.5 lb. Head - $46.00
#825- 20212
Hardness - 46HRC
Handle Length - 12"
Head Weight - 2½ Lbs
4lb. Head - $60.00
#825-20416
Hardness - 46HRC
Handle Length - 16"
Head Weight - 4 Lbs
8 lb. Head - $80.00
#825-20836
Hardness - 46HRC
Handle Length - 36"
Head Weight - 8 Lbs
12 lb. Head - $120.00
#825-21236
Hardness - 46HRC
Handle Length - 36"
Head Weight - 12 Lbs
1-800-849-4821 or Fax Order to 813-265-0331 • Order Online: www.thegangbox.com
62