Home Monitoring and Control Kit Quick Start Guide

Home Monitoring and Control Kit
Quick Start Guide
Home Monitoring and Control Kit
Included Devices
INSTEON Hub
Dimmer
Modules
Motion
Sensor
Open/Close
Sensor
WiFi
Camera
View the Quick Start Guides for all of
your devices.
INSTEON Hub
Status LED
Factory Reset
Idle / Linking
Unlinking
Power
Ethernet Port
Ethernet
Cable
Power
Cable
Setup Your Hub
1
Connect the Hub to power and your
internet router using only the cables
provided.
X
Avoid power strips and switched outlets
2
Download and install the latest INSTEON
for Hub App from the Apple App Store,
Google Play or Amazon App Store.
insteon for hub
X
INSTEON for Hub
INSTALL
Don’t feel like searching? Scan the
QR Code and tap your store.
3
Join the the same WiFi network to which
the INSTEON Hub is connected and
launch the App. Create a new account.
INSTEON Login
New Account
Existing Account
Remote Access
You can monitor and control your devices
when away if you setup Remote Access. You
can even see your IP Camera from anywhere
in the world.
!
We’re here to help. Call us, chat with
us online or visit insteon.com/kits
If you need help setting up the Hub and/or
camera for remote access, give our support
team a call.
866.243.8022
5AM - 7PM M-F, 6AM - 3PM SAT Pacific Time
Gathering the following information will help
speed up the process:
Router IP Address
_________________
Router User Name (if any) _________________
Router Password
_________________
Wi-Fi Network Name
_________________
Wi-Fi Password
_________________
Add Devices
4
Follow the on-screen instructions to
add your INSTEON devices. Quick Start
Guides are included for your convenience.
Add Device
Plug-In Module
Wired In
LED Bulb
Thermostat
You’re done configuring your
INSTEON Hub.
Create a Schedule
Schedules can be set for individual devices
or entire scenes. Go to the device or scene
properties and tap Schedule.
12 1
10
2
11
9
3
5
8
4
6
7
Time of Day
Sunset
Sunrise
Configure Alerts
Receive an email or text message alert every
time a sensor or device is activated. Enable
alerts by visiting the device properties and
tapping Alerts.
!
!
Trigger a Scene
Sensors can activate scenes. To setup a
trigger, simply add a sensor to a scene.
INSTEON Support
For the video tutorials, product support and
more, visit: insteon.com/kits
MANUAL
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2013 INSTEON
RAW-1323 Rev 08.05.14