Product Catalog - SASE Company Inc.

Transcription

PRODUCT CATALOG 2016
© 2016 SASECompany, Inc.
2016
Product Catalog
www.SASECompany.com│800.522.2606
Page 1
Page 2
SASE Table of Contents
BUSINESS BASICS
About SASE.................... page 2
SASE Warranty Policy.......... page 3
Transit Times................... page 4-5
DIAMOND TOOLING
Metal Bond Diamonds........
Hybrid Diamonds..............
Resin Bonds....................
Removal Tooling............
Three Inch Tooling.............
Five Inch Tooling...............
Six Inch Tooling................
SASE Galaxy System.........
Corner Tooling..................
Five Inch Cup Wheels.....
Seven Inch Cup Wheels..
Diamond Pads..................
Maintenance Pads..........
page
page
page
page
page
page
page
page
page
page
page
page
page
6-10
10-11
12
13-14
15
16
17
18
19
20
21
22-25
26
CHEMICALS & DYES
SASE Chemicals............. page 28-29
Dyes.............................. page 30-32
GRINDERS
PDG 9500 Plus..............
PDG 8000P (Propane)....
PDG R8 (Remote)...........
PDG 8000........................
PDG 6000........................
PDG 5000........................
Edge Pro 180....................
Spyder............................
Plates.............................
page
page
page
page
page
page
page
page
page
34-35
36
37
38-39
40-41
42
43
44
45-48
VACS / Dust Extractors
Bull 1250EBS.................
Bull 1250PRO (Propane).
Bull 1250.........................
Bull 300..........................
Bull 240........................
Bull 45...........................
Bull Preseparator..............
Dust Duty Preseparater........
Accessories.....................
page
page
page
page
page
page
page
page
page
49
50
51
52
53
54
55
56
57
SCARIFIERS
SC12E...............................
SC10E...............................
SC8E.................................
Cutters................................
Drums & Flail Shafts...............
page
page
page
page
page
58
59
60
61-62
63
FLOOR SCRAPERS
Lightning.............................
Hurricane............................
Cyclone..............................
Twister................................
Blades................................
Accessories
page
page
page
page
page
page
64
65
66
67
68
69
HAND TOOLS
Ractac...............................
Rapid Strip.........................
Shrouds...............................
SC70..................................
SC50..................................
Corner Polisher.....................
page
page
page
page
page
page
69
69
69
70
70
70
NEEDLE SCALERS
SC49..................................
SC28AVS............................
SC28..................................
Accessories.........................
page
page
page
page
71
71
71
72
MISCELLANEOUS EQUIPMENT
& INSTRUMENTS
Wet Burnisher..................... page
Burnisher........................... page
SC320 Scarifier / Shaver / Planner page
Gloss Meter................................. page
MOH’s Scratch Test.................... page
SWISSMEX Sprayer............... page
Rubber Squeegee.................. page
Applicator Mop...................... page
73
74
75
76
76
76
77
77
MISCELLANEOUS
Parts................................... page 78-83
Equipment Rental................... page 84
Page 3
ABOUT SASE
Sales, Service
& Distribution
2475 Stock Creek Blvd.
Rockford, TN 37853
(Knoxville)
Assembly
& Manufacturing
26423 79th Ave South
Kent, WA 98032
(Seattle)
Monday - Friday
8:00 am - 7:00 EST
P 800.522.2606
F 865.745.4110
E [email protected]
SASE accepts all major
credit cards, debit cards, wire
transfers, cash and net 30 with
approved credit.
The majority of our parcels are shipped via UPS. We offer
FedEX as requested.
Rockford truck shipments - Old Dominion & R & L Carriers
Kent truck Shipments - Holland
SASE is committed to educating and sharing our
knowledge through SASE University to our contractors
in this exciting and growing industry.
Page 4
MANUFACTURER'S WARRANTY POLICY
Included in this warranty are the following pieces of equipment:
Planetary Diamond Grinders: PDG 9500 Plus, PDG 8000, PDG 6000, PDG 5000, Edge Pro 180
Dust Extractors: Bull 1250 EBS, Bull 1250 Propane, Bull 1250, Bull 300, Bull 240, Bull 45
Scarifiers: SC12E, SC10E, SC8E
Our Commitment to our customer:
SASE Company ("SASE") equipment is warranted to be free of defects in workmanship and
materials for a period of one (1) year from original date of purchase. In the event that you
should have a claim SASE shall repair, replace or remedy the defective parts resulting from the
faulty design, materials or workmanship. Note: This warranty is only valid for equipment either
sold by SASE or by an authorized wholesaler or distributor.
Limitations:
Warranty does not apply to cosmetic
damage, damage due to lightning, electrical
surges, fire, flood or other acts of God,
accident, misuse, abuse, repair or alteration
by other than factory service (unless service
center was approved in writing by SASE),
negligence, or improper or neglected
maintenance as recommended by SASE.
Common wear parts, such as belts,
bearings, seals, filters, dust skirts, wheels,
etc., are exempt from warranty.
SASE is not responsible for loss of income
or down time as a result faulty design,
materials or workmanship.
Warranty coverage is valid once a warranty
registration card is filled out and returned to
SASE.
A $100 labor charge many be assessed
on the items returned for warranty repair
in which no fault is found. Freight charges
and associated fees will then become the
responsibility of the customer in such an
instance.
Damages which are caused during
transportation are not covered under
warranty. Such damage claims should be
filed with the freight carrier.
Claims:
In the unlikely event that you should
experience a defect please contact your
SASE representative or a SASE service
technician by calling 800.522.2606.
Please have all pertinent information
readily available such as, invoice with
date of purchase, model and serial
number, and an explanation of the
issue. SASE will respond immediately
with a corrective action.
Freight responsibility for approved
warranty claims:
If the piece of equipment was
purchased within 90 days of warranty
claim, SASE will arrange for ground
freight and will assume all ground
freight charges to send the customer
the parts required or to send the
equipment to an authorized SASE
repair center. This included inbound
and out bound ground freight and
all fees (duties, fuel surcharges)
associated with the shipments.
If the piece of equipment was
purchased beyond the 90 days and
prior to one(1) year of warranty claim,
SASE will cover 50% of all ground
freight charges, including inbound and
outbound freight and all fees (duties,
fuel surcharges) associated with the
shipment.
Page 5
SAME DAY SHIPPING
SASE ships 98% of orders the same day
R+L Carriers Ground Transit
1 Day
2 Days
3 Days
4 Days
5 Days
UPS Ground Transit Times
1 Day
2 Days
3 Days
4 Days
5 Days
6 Days
FedEx Ground Transit Times
1 Day
2 Days
3 Days
4 Days
5 Days
6 Days
7+ Days
Page 6
Fort Nelson
BRITISH
COLUMBIA
High Level
Smithers
Terrace
Prince
Rupert
Houston
Burns Lake
Fort McMurray
ALBERTA
Dawson Creek
Grande Prairie
Grande Cache
Prince George
Hinton
100 Mile House
Castlegar
Edmonton
Melfort
Helena
Lewistown
Butte
Boise
ID
Glendive
ND
Miles City
Billings
SD
Afton
Logan
Quebec
WY
ME
Fargo
Aberdeen
MN
Sioux Falls
Mason City
Traverse
City
Wausau
Oshkosh
La Crosse
Portland
Burlington
WI
Willmar
Minneapolis/
St. Paul
Rapid City
Ottawa
Duluth
Milwaukee
Grand
Rapids
MI
NY
Toronto
Saginaw
Ann Arbor
London
NH
VT
South Windsor
New Haven
Boonton
Scranton
Boston
Worcester
CT
MA
Old Dommion Freight
Transit Times
1 Day
Providence
RI
Des
Lansing
Long Island
Detroit
Rockford
Erie
Plaines
Elko
Windsor
Rock Springs
Brooklyn
PA Allentown NJ Jersey
South
IA
Cleveland
City
Reno
Bend
Cheyenne
Pittsburgh Philadelphia
Des Moines
Toledo
South Plainfield
Sacramento
Chicago
Cedar
Salt Lake City
NE
Youngstown
Harrisburg
Vernal
Rapids
New Castle
Omaha
NV
Ft. Wayne OH
Columbus
San Francisco
Baltimore
Rock La Salle
UT
CO
Dayton
Winchester
Island
Stockton
IN
Grand Island
DE
Denver
Price
Seaford
WV
St. Joseph
Manassas
San Jose
MD
Decatur
Richfield
Cincinnati
Grand Junction
Indianapolis
Waynesboro
KS
Columbia
Fresno
Topeka
Charleston
Moab
IL
VA Richmond
St. George
Colorado Springs
Salina
Louisville
Evansville
CA
Norfolk
Kansas City St. Louis
Great Bend
Lynchburg
Lexington Roanoke
Las Vegas
Bakersfield
Martinsville
MO
Durham
KY
Wytheville
Wichita
Paducah
Oxnard
Farmington
Parsons
Greensboro
Rialto
Cookeville Morristown
Springfield
NC Wilson
Nashville
Hickory
Fayetteville
Los Angeles
Charlotte
OK
Tulsa
Jackson
TN
Albuquerque
Jonesboro
Asheville
Chattanooga
Long Beach
AZ
Greenville
Wilmington
Ft. Smith
West Atlanta
AR Memphis
Oklahoma City
NM
Florence
Amarillo
Phoenix
San Diego
North Georgia Columbia
Huntsville
Tupelo
Little Rock
Birmingham
Atlanta
Charleston
Wichita Falls
Augusta SC
AL
Texarkana
GA
Tucson
MS
Lubbock
Vidalia
Macon
Savannah
Monroe
Abilene
Columbus
Fort Worth Dallas
Jackson Montgomery
El Paso
Shreveport
Dothan
Odessa
Sylvester
Mobile
Tyler
Waco
LA
TX
Jacksonville
Austin
Lafayette
FL
Beaumont
Ocala
Baton
Houston
New Orleans
Rouge
Orlando
San Antonio
Tampa
Laredo Corpus
Sarasota
Christi
West Palm Beach
Fort
Myers
Pompano Beach
Miami
Brownsville
Chico
Halifax
Walpole
Albany
Syracuse
Buffalo
P.E.I.
NOVA
SCOTIA
Montreal
Bismarck
Idaho Falls
Pocatello
NEW
BRUNSWICK
Winnipeg
MT
Bozeman
Twin Falls
ONTARIO
Regina
Sidney
Great Falls
Missoula
OR
Swift Current
Medicine Hat
Havre
Yakima
Corvallis Eugene
QUEBEC
Yorkton
Brooks
Kalispell
Pasco
NEWFOUNDLAND
Prince Albert
Saskatoon
Lethbridge
Medford
Lloydminster
Calgary
Cranbrook
WA Spokane
MANITOBA
SASKATCHEWAN
Red Deer
Revelstoke
Kamloops
Kelowna
Invermere
Vancouver
Seattle/Tacoma
Olympia
LABRADOR
La Ronge
Edson
Quesnel
Portland
OD·DOMESTIC
Fort St. John
Peace River
Chetwynd
Williams Lake
2 Days
3 Days
SERVICE TIMES
Next Day
2 Days
4 Days
3 Days
4 Days
5 Days
6 Days
5 Days
OD·GLOBAL
Container Ports
Old Dominion Service Center
North Central States Partner
6 Days
Not Serviced from Canada
FedEx Small Package Ground
Service to Canada
3 Days
4 Days
5 Days
6 Days
7 Days
11/6/2012
UPS Standard Days in Transit
to Canada
New York
DAYS
IN TRANSIT US TO CANADA - UPS STANDARD
10001
8/22/2012
St. John's
Edmonton
Vancouver
Victoria
6
6
Red Deer
6
Kelowna
5
5
4
Regina
5
Saskatoon
5
Calgary
7
Charlottetown
4
Moncto
Winnipeg
Quebec City
4
Montreal 4
Sudbury
Ottawa
Windsor
3
5
Halifax
4
4
3
London
5
4
Toronto
3
http://d-maps.com/carte.php?lib=canada_map&num_car=23179&lang=en
.
Page 7
YELLOW SERIES
Very soft bond used to grind extremely hard concrete floors.
EXTREMELY HARD
VERY HARD
HARD
MEDIUM
SOFT
VERY SOFT
ITEM
DESCRIPTION
IDEAL USE
HOL.502631QCS
HOL.502535QCS
Yellow DS 25 Grit
Yellow SS 25 Grit
Designed for exposing large aggregate or
removing or prepping for 10 mil coatings
HOL.502632QCS
HOL.502536QCS
Yellow DS 40 Grit
Yellow SS 40 Grit
Designed to hone concrete for diamond
polishing or thin mil coating application
HOL.502633QCS
HOL.502537QCS
Yellow DS 80 Grit
Yellow SS 80 Grit
Follows 40 Grit, often used as a first
step on new concrete, ideal prep for acid
staining
HOL.502634QCS
HOL.502538QCS
Yellow DS 150 Grit
Yellow SS 150 Grit
Follows the 80 Grit in polishing to leave a
smooth, even profile
GOLD SERIES
Very soft bond used to grind very hard to hard concrete floors.
EXTREMELY HARD
VERY HARD
HARD
MEDIUM
SOFT
VERY SOFT
ITEM
DESCRIPTION
IDEAL USE
HOL.502555QCS
HOL.502549QCS
Gold DS 16 Grit
Gold SS 16 Grit
Designed for exposing large aggregate
and removing or prepping for 10-20 mil
coatings
HOL.5025555QCS
HOL.5025495QCS
Gold DS 25 Grit
Gold SS 25 Grit
HOL.502556QCS
HOL.502550QCS
Gold DS 40 Grit
Gold SS 40 Grit
polishing or thin mil coating preparation
HOL.502557QCS
HOL.502551QCS
Gold DS 80 Grit
Gold SS 80 Grit
Follows 40 Grit used as a first step on new
concrete, ideal prep for acid staining
HOL.502558QCS
HOL.502552QCS
Gold DS 150 Grit
Gold SS 150 Grit
Follows the 80 Grit in polishing to leave a
smooth, even profile
HOL.502559QCS
Gold DS 300 Grit
Removes 150 Grit scratch pattern and
leaves an ideal profile prior to going to a
resin bond diamond
Page 8
BLUE SERIES
Soft bond used to grind hard to medium concrete floors.
EXTREMELY HARD
VERY HARD
ITEM
HARD
MEDIUM
SOFT
VERY SOFT
DESCRIPTION
IDEAL USE
HOL.502601QCS
Blue DS 6 Grit
Designed for exposing large aggregate and
HOL.502602QCS
Blue DS 16 Grit
Designed for exposing large aggregate or removing
or prepping for 10 mil coatings
HOL.5026025QCS Blue DS 25 Grit
HOL.502603QCS
Blue DS 40 Grit
Designed to hone concrete for diamond polishing or
thin mil coating preparation
HOL.502604QCS
Blue DS 80 Grit
Designed to follow 40 Grit, often used as a first step
on new concrete, ideal prep for acid staining
HOL.502605QCS
Blue DS 150 Grit
Designed to follow the 80 Grit in polishing
applications to leave a smooth, even profile
HOL.502606QCS
Blue DS 300 Grit
Removes 150 Grit scratch pattern and leaves an
ideal profile prior to going to a resin bond diamond
HOL.502618QCS
Blue DS 25 Grit Arrow
Fast effective coatings removal and floor
preparation
RED SERIES
Medium bond used to grind medium to soft concrete floors.
EXTREMELY HARD
VERY HARD
HARD
MEDIUM
SOFT
VERY SOFT
ITEM
DESCRIPTION
IDEAL USE
HOL.502612QCS
HOL.502542QCS
Red DS 16 Grit
Red SS 16 Grit
removing or prepping for 10-20 mil coatings
HOL.5026125QCS
Red DS 25 Grit
HOL.502613QCS
HOL.502543QCS
Red DS 40 Grit
Red SS 40 Grit
HOL.502614QCS
Red DS 80 Grit
Follows 40 Grit, used as a first step on new
concrete, ideal prep for acid staining
HOL.502615QCS
Red DS 150 Grit
HOL.502616QCS
Red DS 300 Grit
Removes 150 Grit scratch pattern and leaves
an ideal profile prior to going to a resin bond
HOL.502617QCS
Red DS 25 Grit
Arrow
Fast effective coatings removal and floor
preparation
Page 9
BLACK SERIES
Hard bond used to grind soft concrete floors.
EXTREMELY HARD
VERY HARD
HARD
MEDIUM
SOFT
VERY SOFT
ITEM
DESCRIPTION
IDEAL USE
HOL.502622QCS
Black DS 16 Grit
removing or prepping for 10-20 mil coatings
HOL.5026225QC
Black DS 25 Grit
HOL.502623QCS
Black DS 40 Grit
HOL.502624QCS
Black DS 80 Grit
Designed to follow 40 Grit, often used as a first step
on new concrete, ideal to prep for acid staining
HOL.502625QCS
Black DS 150 Grit
HOL.502626QCS
Black DS 300 Grit
Page 10
ORANGE SERIES
Very hard bond used to grind very soft concrete floors.
EXTREMELY HARD
VERY HARD
HARD
MEDIUM
SOFT
VERY SOFT
ITEM
DESCRIPTION
IDEAL USE
HOL.502607QCS
Orange DS 16 Grit
removing or prepping for thin mil coatings
HOL.5026075QC
Orange DS 25 Grit
HOL.502608QCS
Orange DS 40 Grit
Designed to hone concrete for diamond polishing
or thin mil coating preparation
Orange DS 80 Grit
Designed to follow 40 Grit, often used as a first
step on new concrete, ideal prep for acid staining
HOL.502610QCS
Orange DS 150 Grit
HOL.502611QCS
Orange DS 300 Grit
HOL.502609QCS
The Orange Series Long Life Diamonds
were engineered for the most abrasive grinding applications, including rained on
concrete, spalled concrete, broom finished concrete, and shot blasted floors.
ITEM
DESCRIPTION
IDEAL USE
HOL.502808QCS
Orange Long Life
30/40 Grit
Designed for smoothing out broom finished and
heavy shot blasted concrete surfaces
HOL.502809QCS
Orange Long Life
60/80 Grit
Designed for smoothing rained on slabs,sight
shot blasted concrete and for removing thin
coatings
HOL.502810QCS
Orange Long Life
120/150 Grit
Designed for smoothing rained on slabs and
extremely soft concrete
Page 11
Metal Bond Diamond Pucks
ITEM
DESCRIPTION
HOL.800753
HOL.800740
HOL.800741
HOL.800749
5 Segment Gold 18/20 Grit
HOL.800754
HOL.800742
HOL.800743
HOL.800750
HOL.800755
HOL.800744
HOL.800745
HOL.800751
5 Segment Blue 18/20 Grit
HOL.800756
HOL.800746
HOL.800747
HOL.800752
10 Segment Blue 150 Grit
HOL.800757
HOL.800759
HOL.800761
HOL.800763
5 Segment Black 18/20 Grit
HOL.800758
HOL.800760
HOL.800762
HOL.800764
HOL.800748
Pin for Prepmaster Mounting System
3"
D Squ2red Hybrid Style Diamonds
ITEM
DESCRIPTION
IDEAL USE
HOL.200809
D2 Hybrid Diamonds
80 Grit
Followed by Xenith pads for
polishing overlays
HOL.200810
D2 Hybrid Diamonds
120 Grit
Followed by Xenith pads for
polishing overlays
HOL.400830Y
D2 Hybrid Diamonds
120 Grit
For Concrete
Page 12
3” and 2” Hybrid Diamonds
QuikCut hybrids are the perfect transition diamond as you move from metal to resin bond.
In some applications, these diamonds can be used as the initial cut, thus eliminating the
use of a metal bond.
3" & 2"
ITEM
DESCRIPTION
IDEAL USE
HOL.502832Y
3” QuikCut Hybrid
Diamond Yellow Series,
Medium Grit
For quick, aggressive cutting on
new concrete. Yellow Series for
hard concrete
HOL.502832B
3” QuikCut Hybrid Diamond,
new concrete. Black Series for
Black Series, Medium Grit
soft to medium concrete
HOL.502838Y
new concrete. Yellow Series for
Yellow Series, Medium Grit
hard concrete
HOL.502838B
new concrete. Black Series for
Black Series, Medium Grit
soft to medium concrete
3” Hybrid Pucks
These hybrid pucks are fast cutting and designed to use wet or dry.
ITEM
DESCRIPTION
HOL.400502
3” Hybrid Diamond Puck Grey 50 Grit
HOL.400503
3” Hybrid Diamond Puck Black 100 Grit
HOL.400504
3” Hybrid Diamond Puck Blue 200 Grit
HOL.400505
3” Hybrid Diamond Puck Red 400 Grit
3"
NEW
3” Hybrid Pucks Wet
New in Hybrid Tooling. These hybrid pucks are fast cutting and designed to use wet.
ITEM
DESCRIPTION
HOL.300601
3" Hybrid Puck Wet 50 Grit
HOL.300602
HOL.300603
HOL.300604
Page 13
3"
2"
ITEM
HOL.200839
DESCRIPTION
50 Grit Grey
IDEAL USE
Removal of scratches left by metal bonds
HOL.200840
100 Grit Black
Used as the first step in polishing
HOL.200841
200 Grit Blue
Typically used as the last step before dye and densifier are applied
HOL.200842
400 Grit Red
Used to remove 200 Grit profile
HOL.200843
800 Grit White
Provides high shine, last step in polishing of retail stores
HOL.200844
1500 Grit Yellow
Provides a very high shine
ITEM
DESCRIPTION
IDEAL USE
HOL.900104
3" 800 Grit White
A very high shine
HOL.900105
3" 1500 Grit Yellow
The highest shine
3"
ITEM
DESCRIPTION
IDEAL USE
HOL.300705
3" 800 Grit White
A very high shine
HOL.300706
3" 1500 Grit Yellow
The highest shine
3"
“Hockey” Puck Style
Resin Bond Diamonds
3"
ITEM
DESCRIPTION
IDEAL USE
HOL.502710
3” Puck Style Grey 50 Grit Resin
HOL.502711
3” Puck Style Black 100 Grit Resin
HOL.502712
3” Puck Style Blue 200 Grit Resin
Used for removal of 100 grit scratches
HOL.502713
3” Puck Style Red 400 Grit Resin
Used as the last step before dye and densifier are
applied
HOL.502714
3" Puck Style White 800 Grit Resin
Provides a high shine, often the last step in polishing
fo retail stores
HOL.502715
3" Puck Style Yellow 1500 Grit Resin
HOL.502716
3" Puck Style Gree 3000 Grit Resin
Provides the highest shine
Page 14
NEW
X SERIES
Removal Tools
SASE offers a complete line of PCD (poly crystalline
diamonds) and Removal Tools for fast, effective
removal of coatings and self-levelers.
WÜLF
ITEM
DESCRIPTION
IDEAL USE
HOL.200996QCS
PCD Split SS QCS
HOL.200997QCS
PCD Split DS QCS
HOL.200988 (A)
PCD ¼ Round DS with Wear
Bar (A)
For fast, effective thin mil
coatings removal
HOL.200989* (B)
PCD ¼ Round DS with Wear
Bar (B)
HOL.200993 (A)
PCD ¼ Round DS (A)
HOL.200994* (B)
PCD ¼ Round DS (B)
HOL.201012 (A)
Gold PCD Diamond Plate
270mm (A)
HOL.201013* (B)
HOL.201010 (A)
HOL.201011* (B)
NB.13.118
Removes thin to medium mil
coatings without damaging the
concrete surface. Diamond wear
bar controls the depth of the cut.
For fast, effective thick mil
coatings removal. Tears through
elastic or rubberized membranes
and compounds
Gold PCD Diamond Plate
270mm (B)
Ideal for removing medium
to thick mil coatings. 10 PCD
segments versus 6, providing
maximum removal
Silver PCD Diamond Plate
with Wear Bar, 270mm (A)
Silver PCD Diamond Plate
with Wear Bar, 270mm (B)
Removes thin to medium mil
coatings without damaging the
concrete surface. Diamond wear
bar controls the depth of the cut
while leaving a smooth profile
Screw, Flat Head Socket Cap
For use with non-plate style
PCD tooling. Requires three per
segment
Note: These are directional tools. Those marked with * go in the opposite direction.
Tungsten Scraper Squares
ITEM
DESCRIPTION
IDEAL USE
HOL.904145
Tungsten Scraper Holder
For quick and easy removal of even
the thickest and most difficult mastics
HOL.SPMW643 Tungsten Scraper Square
HOL.904150
Tungsten Holder w/ Scraper
Squares (complete unit)
HOL.900000
Screws, Flat Head Socket Cap
For use with non-plate style PCD
tooling. Requires 3 per segment
Page 15
Bush Hammer
A bush hammer is a tungsten tip tool used to remove coatings or texture concrete. The 45
pins leave an excellent profile for the bonding of coatings and overlays. This tool is also
effective at creating a non-stick profile suitable for both inside and outside environments.
ITEM
DESCRIPTION
SAS.905999
270mm Bush Hammer Complete Plate
45 Pin Roller w / Holder
SAS.905700
Roller Only
SAS.905600
Holder Only
SAS.00178
240mm Bush Hammer Complete Plate
PDG.90080.07
Bush Hammer Dust Skirt
Page 16
NEW
SAS.905800
3” Metal Flex Diamonds
The Metal Flex diamonds are ideal for removing mastics and sealers,
and to profile edges without gouging the floor. Each individual
diamond segment is 1/8” and won’t bind or close up.
3"
ITEM
DESCRIPTION
IDEAL USE
SC30.500502
3” Metal Flex Aqua 30 Grit
Aggressive cutting without gouging
SC30.500503
3” Metal Flex Grey 50 Grit
Ideal for removing sealers and as a first cut on new concrete
SC30.500504
3” Metal Flex Black 100 Grit
Removes scratches left by 50 Grit Metal Flex Pads
3” Polishing Resin Bond Diamonds
These polishing diamonds work great under
smaller, lighter weight machines, and are a
great alternative for concrete polishing. Good on
various self-leveling compounds.
3"
ITEM
DESCRIPTION
IDEAL USE
SC30.500240
3” Polishing Resin Bond Diamond Grey 50 Grit
Removal of scratches left by metal
bonds
SC30.500241
3” Polishing Resin Bond Diamond Black 100 Grit
SC30.500242
3” Polishing Resin Bond Diamond Blue 200 Grit
Used for removal of 100 Grit scratches
SC30.500243
3” Polishing Resin Bond Diamond Red 400 Grit
Typically used as the last step before
dye and densifier are applied
SC30.500244
3” Polishing Resin Bond Diamond White 800 Grit
Provides a high shine, often the last
step in polishing of retail stores
SC30.500245
3” Polishing Resin Bond Diamond Yellow 1500 Grit Provides a very high shine
SC30.500246
3” Polishing Resin Bond Diamond Green 3000 Grit
5” Metal Flex Diamonds The Metal Flex Pads are ideal for removing mastics and to
profile edges without gouging the floor. Each individual diamond
segment is 1/8” and won’t bind or close up providing an
extended life. These diamonds are for use on the SASE SC50
and other industry 5” hand grinders.
5"
ITEM
DESCRIPTION
IDEAL USE
SC50.500502
SC50.500503
SC50.500504
Page 17
5” Polishing Diamonds
These diamonds are excellent for concrete
polishing edge work. For use on the SASE SC50
and other industry 5” hand grinders.
5"
ITEM
DESCRIPTION
IDEAL USE
SC50.500240
5” Polishing Resin Bond Diamond
Grey 50 Grit
SC50.500241
Black 100 Grit
SC50.500242
Blue 200 Grit
Used for removal of 100 Grit scratches and as the
last step before concrete dye in some applications
SC50.500243
Red 400 Grit
Typically used as the last step before dye and
densifier are applied
SC50.500244
White 800 Grit
Provides a high shine, often the last step in
polishing of retail stores
SC50.500245
Yellow 1500 Grit
SC50.500246
Green 3000 Grit
Provides the highest shine
5” SURE CUT Copper Bond Diamonds
These copper bonded diamonds provide improved longevity and
elimination of swirl marks. These diamonds are for use on the SASE
SC50 and other industry 5” hand grinders.
IDEAL USE
5"
ITEM
DESCRIPTION
SC50.500400
5” SURE CUT Copper Polishing Diamond Often used in place of the 50 Grit metal bond
Aqua 30 Grit
for removal of thin mil coatings and sealers
SC50.500401
5” SURE CUT Copper Polishing Diamond Often used in place of the 100 Grit metal bond
Grey 50 Grit
SC50.500402
5” SURE CUT Copper Polishing Diamond Often used to reduce scratches left from 50 Grit
Black 100 Grit
metal bond
5” Backer Pads
ITEM
DESCRIPTION
IDEAL USE
SC50.900901
5” Rigid Backer Pad 5/8” Arbor
Preferred use with 5” Metal Flex
SC50.900902
5” Flexible Backer Pad 5/8” Arbor
Preferred use with 5” Resin Polishing Pad
Page 18
5"
6” Metal Flex Diamonds
The Metal Flex Pads are ideal for removing mastics and
to profile edges without gouging the floor. Each individual
diamond segment is 1/8” and won’t bind or close up
providing an extended life. Designed for use on the SASE
Edge Pro 180.
6"
ITEM
DESCRIPTION
IDEAL USE
SC60.500249
6” Metal Flex Yellow 16 Grit
Very Aggressive cutting without gouging
SC60.500250
SC60.500251
SC60.500252
6” SURE CUT Copper Bond Diamonds
These copper bonded diamonds provide improved
longevity and elimination of swirl marks. Designed for use
on the SASE EDGE PRO 180.
6"
ITEM
DESCRIPTION
IDEAL USE
SC60.500110
6” SURE CUT Copper Polishing Diamond
Aqua 30 Grit
Often used in place of the 100 Grit metal bond
SC60.500111
Grey 50 Grit
Often used in place of the 100 Grit metal bond
SC60.500112
Black 100 Grit
Often used to reduce scratches left from 50
Grit metal bond
6” Polishing Diamonds
Excellent for concrete polishing edge work,
these diamonds are designed to be used on
the SASE EDGE PRO 180.
6"
Item
Description
Ideal Use
SC60.500240
6” Polishing Resin Diamond Grey 50 Grit
SC60.500241
6” Polishing Resin Diamond Black 100 Grit
SC60.500242
6” Polishing Resin Diamond Blue 200 Grit
Used for removal of 100 Grit scratches
SC60.500243
6” Polishing Resin Diamond Red 400 Grit
Typically used as the last step
before dye and densifier are applied
SC60.500244
6” Polishing Resin Diamond White 800 Grit
Provides a high shine, often the last step in
retail stores
SC60.500245
6” Polishing Resin Diamond Yellow 1500 Grit Provides a very high shine
SC60.500246
6” Polishing Resin Diamond Green 3000 Grit Provides the highest shine
Page 19
SASE BEE Line Honeycomb Pads
Description
Ideal Use
SC50.500340
5" Honeycomb Pads, 50 Grit
Aggressive cut, quick & fast
SC50.500340
SC50.500340
SC50.500340
5"
NEW
Item
SASE Galaxy System
Carrier pads available in 27”, 21” & 20”
TECHNICAL DATA
27"
Item Number:
SSP.279002
Diameter
27”
Capacity
Holds Fifteen 3” (7.5 cm) Diamond Polishing Pads
TECHNICAL DATA
21"
Item Number:
SSP.219023
Diameter
21”
Capacity
Holds Ten 3” (7.5 cm) Diamond Polishing Pads
TECHNICAL DATA
20"
Item Number:
SSP.209034
Diameter
20”
Capacity
Holds Ten 3” (7.5 cm) Diamond Polishing Pads
GALAXY 3" Polishing Pads
Page 20
SC30.500240
Grey 50 Grit
SC30.500241
Black 100 Grit
SC30.500242
Blue 200 Grit
SC30.500243
Red 400 Grit
SC30.500244
White 800 Grit
SC30.500245
Yellow 1500 Grit
SC30.500246
Green 3000 Grit
Corner Polishing Metal Bond Diamonds
These corner polishing pads are ideal for
corners and tight areas and are designed to
be used on the SASE Corner Polisher.
Item
Description
Ideal Use
HOL.502901
Corner Metal Bond Diamond Green 60 Grit
Removal of cream and sealers
HOL.502902
Corner Metal Bond Diamond Black 120 Grit
Removal of 60 Grit metal bond scratches
HOL.502903
Corner Metal Bond Diamond Red 200 Grit
Readies corners for polishing
HOL.502904
Corner Metal Bond Diamond Yellow 400 Grit
First polishing step of corners
Corner Polishing Resin Bond Diamonds
These corner polishing pads are ideal for corners
and tight areas and are designed to be used on the
SASE Corner Polisher.
Item
Description
Ideal Use
HOL.502905
Corner Resin Bond Diamond White 500 Grit
Creates a high shine
HOL.502906
Corner Resin Bond Diamond Blue 1000 Grit
Creates a high shine
HOL.502907
Corner Resin Bond Diamond Orange 3000 Grit
Creates the highest shine
ItemDescription
SAS.FMM0510
Pad, 2pk Corner Polisher
Page 21
5" Hybrid Cup Wheels
Our newest advanced technology 3 step edge wheel polishing system with
outstanding finishes. This system will reduce your time by up to 50% compared
with conventional methods.
5"
ITEM
DESCRIPTION
IDEAL USE
SC50.900702C
5” QUIKCUT Edge Wheel
Coarse Grey
For stock removal of concrete and mastics,
rubbers, epoxies, and other coatings
SC50.900701M
Medium Blue
SC50.900700F
Fine Yellow
Aggressive removal of thin to medium coatings
5” Cup Wheels
The 5” cup wheels are excellent for coatings removal and aggregate exposure
of concrete surfaces, and are used on the SASE SC50 and all other industry
5” hand grinders.
5"
ITEM
DESCRIPTION
IDEAL USE
SC50.900608
5” 18 Segment Cup Wheel
Threaded
SC50.900609
5” T-Segment Cup Wheel
Threaded
SC50.900610
5” Arrow Segment Cup Wheel
Threaded
SC50.900810
5” Hybrid Resin Filled Coarse
Threaded
Ideal for light surface prep or for polished
concrete edge work to expose minimal
aggregate, while leaving a smooth profile and
blending edges
SC50.900811
5” Hybrid Resin Filled Medium
Threaded
Ideal for light surface prep or for polished
concrete edge work, leaving a smooth profile
and blending edges
SC50.900812
5” Hybrid Resin Filled Fine
Threaded
Ideal for polished concrete edge work, leaving
a smooth profile and blending edges
SC50.900711
5” Diamond Cluster Cup Wheel
Medium Grit
Fast aggressive removal of paints, epoxies
and glue
Page 22
7" Hybrid Cup Wheels
Our newest advanced technology 3 step edge wheel polishing system with
outstanding finishes. This system will reduce your time by up to 50% compared with
conventional methods.
7"
ITEM
DESCRIPTION
IDEAL USE
SC70.850802C
Coarse Grey
SC70.850801M
Medium Blue
SC70.850800F
Fine Yellow
7” Cup Wheels The 7” cup wheels are excellent for coatings removal and aggregate
exposure of concrete surfaces. They are designed to be used on the
SASE SC70 and other industry 7” hand grinders.
7"
Item
Description
Ideal Use
SC70.900613
7” 6 PCD Segment Wulf Series
Non-Threaded
Removal of thick mil
coatings and self levelers
SC70.900614
SC70.900615
7” 10 Segment Arrow Configuration,
Non-Threaded
7” 10 Segment Arrow Configuration,
Threaded
Fast, aggressive thin
to medium mil coatings
removal
SC70.900605
SAS.7TSEGWHEEL
7” 14 Segment T Configuration
Non-Threaded
7” 14 Segment T Configuration
Threaded
SC70.900600
SAS.07TCW24PRN
7” 24 Segment Turbo
Non-Threaded
7” 24 Segment Turbo Threaded
Prep
SC70.900603
SAS.TAW07TCW12
7” 12 Segment Turbo
Non-Threaded
7” 12 Segment Turbo Threaded
Aggressive prep
7” 12 Segment Single Row
SC70.900601
Non-Threaded
SAS.07TCWPSRWN
7” 12 Segment Single Row Threaded
Light prep work
Aggressive prep
SC70.900602
7” 24 Segment Double Row
Non-Threaded
Prep
SC70.900604
7” 18 Segment 9 Long, 9 Short
Non-Threaded
Thin mil removal
SC70.900714
7” Diamond Cluster Cup Wheel
Medium Grit
Fast aggressive removal
of paints, glue & epoxies
Page 23
LINE
PADS
MAINTENANCE & REPAIR
Advanced Diamond Coated Pad Technology
11"
ITEM
DESCRIPTION
HOL.400880
50 Grit Xenith MR Pad
HOL.400881
HOL.400882
HOL.400883
HOL.400884
HOL.400885
HOL.400886
Page 24
11" Xenith MR pads for use on
SASE Tri-Force 3 head polisher
Ideal for polishing concrete and overlays. Designed to prevent scratching while
polishing concrete.
ITEM
DESCRIPTION
HOL.200811
50 Grit Xenith Pad
HOL.200812
100 Grit Xenith Pad
HOL.200813
200 Grit Xenith Pad
HOL.200814
400 Grit Xenith Pad
HOL.200815
800 Grit Xenith Pad
HOL.200816
1500 Grit Xenith Pad
HOL.200817
ITEM
DESCRIPTION
HOL.200833
50 Grit Xenith Pad
HOL.200834
100 Grit Xenith Pad
HOL.200835
200 Grit Xenith Pad
HOL.200836
400 Grit Xenith Pad
HOL.200837
800 Grit Xenith Pad
HOL.200838
HOL.200839
ITEM
DESCRIPTION
HOL.300850
50 Grit Xenith Pad
HOL.300851
100 Grit Xenith Pad
HOL.300852
200 Grit Xenith Pad
HOL.300853
400 Grit Xenith Pad
HOL.300854
800 Grit Xenith Pad
HOL.300855
HOL.300863
5"
5" Xenith pads for use on SASE
SC50 and other 5" hand grinders
6"
6" Xenith pads for use on
SASE Edge Pro 180
8"
8" Xenith Pads for use on SASE
PDG 5000, PDG 6000 and other
industry grinders
Page 25
Ideal for polishing concrete and overlays. Designed to prevent scratching while
polishing concrete.
9"
ITEM
DESCRIPTION
HOL.300864
50 Grit 9" Xenith Pad
HOL.300865
100 Grit 9"Xenith Pad
HOL.300866
HOL.300867
HOL.300868
HOL.300869
HOL.300870
ITEM
DESCRIPTION
HOL.300871
50 Grit Xenith Pad
HOL.300872
100 Grit Xenith Pad
HOL.300873
200 Grit Xenith Pad
HOL.300874
400 Grit Xenith Pad
HOL.300875
800 Grit Xenith Pad
HOL.300876
HOL.300877
ITEM
DESCRIPTION
HOL.300878
50 Grit Xenith Pad
HOL.300879
100 Grit Xenith Pad
HOL.300880
200 Grit Xenith Pad
HOL.300881
400 Grit Xenith Pad
HOL.300882
800 Grit Xenith Pad
HOL.300883
HOL.300884
11"
17"
9" Xenith Pads for use on the 500 and
other industry grinders
11" Xenith Pads for use on the SASE PDG
8000, 800 series, 820, G320, 3200 and other
industry 32" grinders
17" Xenith Pads for use on PDG 9500 Plus
Page 26
These pads will mount to a high speed
burnisher to restore shine or burnish in guard.
Use our TRIFECTA pads for a full rejuvenation
of a polished concrete floor & remove
imperfections left by the polishing process.
ITEM
DESCRIPTION
®
IDEAL USE
Sold 2 per box
27"
SSP.27.40100
27” TRIFECTA PAD 100 Grit
Used for burnishing and restoration under 27” burnishers
SSP.27.40400
SSP.27.40800
SSP.27.41500
27” TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 27” burnishers
SSP.27.43000
ITEM
DESCRIPTION
IDEAL USE
24"
SSP.24.30100
SSP.24.30400
SSP.24.30800
SSP.24.31500
SSP.24.33000
ITEM
DESCRIPTION
IDEAL USE
20"
SSP.20.20100
SSP.20.20400
SSP.20.20800
SSP.20.21500
SSP.20.23000
ITEM
DESCRIPTION
IDEAL USE
17"
SSP.17.10100
SSP.17.10400
SSP.17.10800
SSP.17.11500
SSP.17.13000
Page 27
ITEM
DESCRIPTION
IDEAL USE
SAS.00013
13" Sapphire Pad
Used to clean floor between polishing
SAS.00014
14" Sapphire Pad
SAS.00016
16" Sapphire Pad
SAS.00017
17" Sapphire Pad
SAS.00020
20" Sapphire Pad
ITEM
DESCRIPTION
SSP.27HEAT
Used on floors where a matte finish is
27" SureShine Pad
desired. For use on SASE 27" high speed
(5 per pack)
burnisher
Sold 5 per box
IDEAL USE
Sold 5 per box
ITEM
DESCRIPTION
IDEAL USE
SSP.27.005
27" White Burnisher Pad
steps and after applying SASE Protect
(5 per pack)
Plus or polish guard under 27" burnishers
Sold 5 per box
Page 28
NEW
Page 29
ITEM
DESCRIPTION
SAS.SFS.D1
SASE SFS D1 is a water-based low VOC
(1g/L), premium-hybrid multi-silicate densifier
that increases surface hardness, reduces
dusting, and improves stain resistance for
new or existing concrete and cement terrazzo
floors. Unlike typical densifiers, SASE SFS
D1 penetrates concrete surfaces at different
levels ensuring hardening of the wear surface
regardless of porosity.
Coverage Sq. ft.
500 Min. - 750 Max
(per gallon)
Densifer
Low Solids
ITEM
DESCRIPTION
SAS.SFS.D2
SASE SFS D2 is a water-based low VOC
(1g/L), premium-hybrid multi-silicate densifier
that increases surface hardness, reduces
dusting, and improves stain resistance for new
or existing concrete and cement terrazzo floors.
Unlike typical densifiers, SASE SFS D2
penetrates concrete surfaces at different
levels ensuring hardening of the wear surface
regardless of porosity.
Coverage Sq. ft.
750 Min. - 1,000 Max
(per gallon)
Densifer
ITEM
DESCRIPTION
SAS.SFS.PROPLUS
SFS Protect Plus is a low VOC (5g/L) premiumhybrid copolymer, film forming protective treatment
water-based sealer that enhances sheen and
stain resistance for concrete and cement terrazzo
floors. The product can be burnished quickly for a
high shine, resists scuffing and surface abrasion,
and provides water and stain resistance.
Coverage Sq. ft.
2,000 Min. - 2,250 Max
(per gallon)
Guard
Page 30
ITEM
DESCRIPTION
SAS.SFS.R3
SASE SFS SPR3 is a premium-hybrid
solvent-borne low VOC (5g/L), clear
penetrating oil and water repellent. SASE
SFS SPR3 penetrates untreated or densified
concrete and hard surfaces, such as marble
and stone, without leaving topical residues.
Coverage Sq. ft.
3,000 Min. - 3,500 Max
(per gallon)
Penetrating Sealer
(Solvent Based)
ITEM
SAS.SFS.R3WB
Coverage Sq. ft.
1,250 Min. - 1,500 Max
(per gallon)
DESCRIPTION
SASE SFS SPR3 WB is a premiumhybrid water-borne low VOC (39g/l), clear
penetrating oil and water stain inhibitor.
SASE SFS SPR3 WB penetrates untreated
or densified concrete and hard surfaces,
such as marble and stone, without leaving
topical residues.
Penetrating Sealer
(Water Based)
ITEM
DESCRIPTION
SAS.FLOCLE.05G
SASE Cleaner is a low VOC maintenance
dirt, grease and other contaminants while
preserving the concrete surface
Cleaner
ITEM
Page 31
SASE LIQUID CONCENTRATE
Dye Colors
LEMON
RAW SIENNA COYOTE BROWN BEACH
BURNT SIENNA RUST
MAHOGANY
RED
TUSCAN RED
SEDONA
RED WOOD
LIGHT BROWN MEDIUM BROWN DARK BROWN GREY
WINE
PLUM
BAHAMA SEA
ROYAL BLUE
CHARCOAL
EMERALD
TEAL
EVERGREEN
STEEL BLUE
BLACK
COLOR
ITEM NUMBER
COLOR
ITEM NUMBER
LEMON
SAS.LEM1G (5G)
DARK BROWN
SAS.DAB1G (5G)
RAW SIENNA
SAS.RAS1G (5G)
GREY
SAS.GRE1G (5G)
COYOTE BROWN
SAS.CBR1G (5G)
WINE
SAS.WIN1G (5G)
BEACH
SAS.BEACH1G (5G)
PLUM
SAS.PLU1G (5G)
TUSCAN RED
SAS.TUR1G (5G)
BAHAMA SEA
SAS.BAS1G (5G)
BURNT SIENNA
SAS.BUS1G (5G)
ROYAL BLUE
SAS.ROB1G (5G)
RUST
SAS.RUS1G (5G)
CHARCOAL
SAS.CHA1G (5G)
RED
SAS.RED1G (5G)
EMERALD
SAS.EME1G (5G)
SEDONA
SAS.SED1G (5G)
TEAL
SAS.TEA1G (5G)
RED WOOD
SAS.REW1G (5G)
EVERGREEN
SAS.EVE1G (5G)
MAHOGANY
SAS.MAH1G (5G)
STEEL BLUE
SAS.STB1G (5G)
LIGHT BROWN
SAS.LIB1G (5G)
BLACK
SAS.BLA1G (5G)
MEDIUM BROWN
SAS.MEDB1G (5G)
Page 32
stocked colors
NEW
SASE POWDER Dye Colors
LEMON
RAW SIENNA
COYOTE BROWN BEACH
TUSCAN RED
BURNT SIENNA
RUST
SEDONA
RED WOOD
MAHOGANY
LIGHT BROWN
DARK BROWN
WINE
PLUM
BAHAMA SEA
ROYAL BLUE
EMERALD
TEAL
EVERGREEN
STEEL BLUE
CHARCOAL
COLOR
ITEM NUMBER
LEMON
SAS.PLEM1G (5G)
RAW SIENNA
SAS.PRAS1G (5G)
COYOTE BROWN
SAS.PCBR1G (5G)
BEACH
SAS.PBEACH1G (5G)
TUSCAN RED
SAS.PTUR1G (5G)
BURNT SIENNA
SAS.PBUS1G (5G)
RUST
SAS.PRUS1G (5G)
SEDONA
SAS.PSED1G (5G)
RED WOOD
SAS.PREW1G (5G)
MAHOGANY
SAS.PMAH1G (5G)
LIGHT BROWN
SAS.PLIB1G (5G)
stocked colors
BLACK
COLOR
ITEM NUMBER
DARK BROWN
SAS.PDAB1G (5G)
WINE
SAS.PWIN1G (5G)
PLUM
SAS.PPLU1G (5G)
BAHAMA SEA
SAS.PBAS1G (5G)
ROYAL BLUE
SAS.PROB1G (5G)
CHARCOAL
SAS.PCHA1G (5G)
EMERALD
SAS.PEME1G (5G)
TEAL
SAS.PTEA1G (5G)
EVERGREEN
SAS.PEVE1G (5G)
STEEL BLUE
SAS.PSTB1G (5G)
BLACK
SAS.PBLA1G (5G)
Page 33
Classic Dye Colors
Water Based
Stock
COLOR
ITEM NUMBER
COLOR
ITEM NUMBER
PENETRATING AGENT AP.MP1
PATRIOT BLUE
AP.ABABL5G
BLACK
AP.ABBLAC5G
RAM SIENNA
AP.ABRASI5G
BURNT SIENNA
AP.ABBUSG
SADDLE BROWN
AP.ABSABR5G
CARMEL
AP.ABBBUSG
TERRA COTTA
AP.ABTERR5G
MAHOGANY
AP.ABBMAHOG
TURQUOISE
AP.ABBMAHOG
MIDNIGHT BLACK
AP.ABBMIBL5G
WALNUT
AP.ABWALN5G
BLACK
SAS.BLA1G (5G)
stocked colors
•
Acetone (powder) stocked in 1 and 5 gallon units
•
Un-stocked colors will drop ship same day (order before 3:30pm est.)
Page 34
Page 35
SASE PDG 9500 Plus
The SASE PDG 9500 Plus is the newest addition to the SASE line of concrete
grinding and polishing machines. Designed with a low profile and expanded grinding
head that allows you to grind under toe kicks and retail store shelving.
PDG 9500 Plus
PDG9000.03
Required Circuit
3Ø
460 V
40 AMP
Motor Output 15 kw 20 HP
Variable Speed
600 - 1750 RPM
Grinding Pressure
(without weights)
660 lbs
299 kg
Grinding Width
36 in
76.2 cm
Weight
(with two 50 lbs removable weights)
1265 lbs
574 kg
Dimensions
86 x 32 x 47 in
(L x W x H)
218 x 81 x 119 cm
(L x W x H)
• Low profile expanded grinding head allows you to grind under toe kicks and retail store shelving
• Removable shroud allowing it to be converted back to standard 32" grinder
• Unit ships with interchangeable (3) standard 11" QCS plates and (3) 17" QCS plates
• Connects to SASE Bull 1250 dust extractor for dust-free operation
Page 36
NEW
ITEM NUMBER
RECOMMENDED ACCESSORIES
PDG.80286.00
Rubber dust skirt for PDG 9500 Plus
SAS.200141
17" Velcro Plate for 3" Pucks
SAS.100231
17" Xenith Plate Assembly
17" Xenith Pads - 50, 100, 200, 400, 800, 1500, 3000 Grits
Page 37
SASE PDG 8000P (Propane)
The SASE PDG 8000P is the newest addition to the SASE line of concrete grinding
and polishing machines. It contains a powerful 31 horsepower Kawasaki propane
motor. This allows the operator to operate without the hassles that come with using
power cords. With three perfectly balanced grinding heads it allows for easy operation
while following the contour of the floor.
ITEM NUMBER
PDG.8A10000
Front wheel assembly kit
PDG 8000P (Propane)
PDG8000.04
Kawasaki propane 31 HP
Variable Speed
600 - 1750 RPM
Grinding Pressure
(without weights)
660 lbs
299 kg
Grinding Width
30 in
76.2 cm
Weight
1265 lbs
574 kg
Dimensions
86 x 32 x 47 in
(L x W x H)
218 x 81 x 119 cm
(L x W x H)
• Powerful 31 HP Kawasaki motor
• Built for low maintenance
• Operator friendly control panel
• Includes both metal bond QCS and resin flex plates
• Includes two 50 lbs removable weights
Page 38
SASE PDG R8 WITH REMOTE CONTROL
Is the most perfectly balanced, quiet, easy to operate and smoothest running grinder
on the market. With three powerful, flexible heads, it has three points of contact to
follow the contour of the floor with precision.
PDG R8 Remote Control
PDG8100.03
Required Circuit
3Ø
460 V
30 AMP
Variable Speed
850- 2000 RPM
Grinding Pressure
(without weights)
755 lbs
342kg
Grinding Width
30 in
76.2 cm
Weight
1265 lbs
574 kg
Dimensions
86 x 32 x 47 in
(L x W x H)
218 x 81 x 119 cm
(L x W x H)
• Includes a wireless remote that controls all functions, including maneuvering
• Wireless remote has backup wired tether cord
• Powerful 20 HP motor
• Built for low maintenance
• Operator friendly control panel
• Includes two 50 lbs removable weights
Page 39
SASE PDG 8000
Is the most perfectly balanced, quiet, easy to operate and smoothest running grinder on
the market. With three powerful, flexible heads, it has three points of contact to follow
the contour of the floor with precision.
ITEM NUMBER
PDG.8A11000
Front wheel assembly kit
PDG.80028.02
Aluminum bottom plate
PDG.80027.02
Aluminum top plate
PDG.80029.60
Aluminum stationary sheave
PDG 8000
PDG8000.01 (230 V)
PDG8000.03 (460 V)
PDG8000.02 (380 V - European version)
Required Circuit
3Ø
3Ø
3Ø
230 V
460 V
380 V
60 AMP
40 AMP
40 AMP
European version
Variable Speed
600 - 1750 RPM
Grinding Pressure
(without weights)
660 - 760 lbs
299 - 345 kg
Grinding Width
30 in
76 cm
Weight
1180 lbs
535 kg
Dimensions
84 x 32.5 x 72 in
(L x W x H)
213 x 83 x 183 cm
(L x W x H)
• Powerful 20 HP motor
• Perfectly balanced and built for low maintenance
• Includes QCS plates
• Connects to SASE BULL 1250 dust extractor for dust-free operation
• Three powerful and flexible heads provide three points of contact to best follow the contour of the floor
• Serpentine belt systems with belt tensioner
• Smart hose design and coupling provide greater suction
• Completely sealed head; stands up to the toughest jobs, even with excessive dust or slurry
• 50’ power cord; one end consisting of a pig tail, the other end contains a female twistlock plug
Page 40
EQUIPMENT
PACKAGE
ITEM
DESCRIPTION
QUANTITY
PDG.8000.03
SASE PDG 8000 Grinder 460 V
1
VAC.BULL1250.440.SS
SASE BULL 1250 Dust Collector 460 V
1
SAS.300104
SASE Flexplate
3
AIW.6X4CORD
100’ Extension Cord (Special Order)
1
COATINGS REMOVAL
PACKAGE
ITEM
DESCRIPTION
QUANTITY
HOL.201010
Plate, 270mm with PCD & Wear Bar
3
HOL.201012
Plate, 270mm with PCD
3
HOL.200997QCS
WÜLF Series PCD Split DS
9
HOL.904150
WÜLF Tungsten Scraper Holder w / Scraper Squares
9
HOL.502602QCS
Metal Bond Diamond Blue 16 Grit DS QCS
9
HOL.5026025QCS
9
CONCRETE POLISHING
PACKAGE
ITEM
DESCRIPTION
QUANTITY
HOL.502603QCS
9
HOL.502604QCS
9
HOL.502605QCS
9
HOL.200840
Triton Resin Bond Diamond Black 100 Grit
36
HOL.200841
Triton Resin Bond Diamond Blue 200 Grit
36
HOL.200842
Triton Resin Bond Diamond Red 400 Grit
36
HOL.200843
Triton Resin Bond Diamond White 800 Grit
36
HOL.200844
Triton Resin Bond Diamond Yellow 1500 Grit
18
ADDITIONAL
ACCESSORIES
ITEM
DESCRIPTION
QUANTITY
HOL.905218
Flex Plate System Complete, 3” Puck Style
3
SSP.118100
11” Trifecta SPT 3 Yellow Pad
6
PDG.80082.00
Plate, QCS Diamond Carrier Steel, 270mm
3
SAS.300104
SASE Flex Plate
3
PDG.80067.00
Dust Skirt, Rubber
1
SAS.SCRATCH Concrete Hardness Scratch Test
1
SAS.METER01
Gloss Meter
1
SAS.CS8365C
Twistlock 50A, 230 v 3P Male
1
SAS.CS8165C
Twistlock 50A, 460 v 3P Male
1
SAS.PIGTAIL
Reverse Polarity Pigtail *this is for the Bull 1250 and 460v
1
Page 41
SASE PDG 6000
A highly versatile 25” floor grinder that is
small enough to maneuver in more confined
spaces, yet powerful enough to provide
superior performance for concrete polishing
and surface prep.
PDG 6000
PDG6000.01 (230 V)
PDG6000.03 (460 V)
Required Circuit
3Ø
3Ø
3Ø
230 V
460 V
380 V
40 AMP
40 AMP
30 AMP
European version
Motor Output 7.5 kw 10 HP
Variable Speed
600 - 1750 RPM
Grinding Pressure
(without weights)
267 - 330 lbs
121 - 150 kg
Grinding Width
25 in
63.5 cm
Weight
546 lbs
248 kg
Dimensions
53 x 26 x 44 in
(L x W x H)
132 x 66 x 112 cm
(L x W x H)
• Ideal for o
pen or confined spaces
• Perfectly balanced and built for low maintenance
• Includes two 33 lbs removable weights and will accept up to four 33 lbs weights
• Connects to SASE BULL 300 dust extractor for dust-freeoperation
• No special tools are required to perform routine maintenance
• Serpentine belt systems with belt tensioner
• Low profile handle
• Smart hose design and coupling provide greater suction
Page 42
EQUIPMENT
PACKAGE
ITEM NUMBER
DESCRIPTION
QUANTITY
PDG.6000.03
SASE PDG 6000 Grinder 460V
1
VAC.BULL300
SASE BULL 300 Dust Extractor 110V
1
SPECIAL ORDER
100’ Extension cord
1
COATINGS REMOVAL
PACKAGE
ITEM NUMBER
DESCRIPTION
QUANTITY
HOL.200988
WÜLF PCD Quarters DS with Wear Bar
9
HOL.200993
WÜLF PCD Quarters DS
9
HOL.200997QCS
WÜLF Series PCD Split DS
9
HOL.904150
WÜLF Tungsten Scraper Holder w / Scraper Squares
9
HOL.502602QCS
9
HOL.5026025QCS
9
CONCRETE POLISHING
PACKAGE
ITEM
DESCRIPTION
QUANTITY
HOL.502603QCS
9
HOL.502604QCS
9
HOL.502605QCS
9
HOL.200840
Triton Resin Bond Diamond Black 100 Grit
36
HOL.200841
Triton Resin Bond Diamond Blue 200 Grit
36
HOL.200842
Triton Resin Bond Diamond Red 400 Grit
36
HOL.200843
Triton Resin Bond Diamond White 800 Grit
36
HOL.200844
Triton Resin Bond Diamond Yellow 1500 Grit
18
ADDITIONAL
ACCESSORIES
ITEM
DESCRIPTION
QUANTITY
PDG.60076.00
Plate, QCS Diamond Carrier Complete, Steel, Rigid
3
PDG.60062.00
Dust Skirt, Rubber
1
SAS.SCRATCH
Concrete Hardness Scratch Test
1
SAS.METER01
Gloss Meter
1
SAS.CS8365C
Twistlock 50A, 230 v 3P Male*
1
SAS.CS8165C
Twistlock 50A, 460 v 3P Male*
1
HOL.905193
Foam Riser, 200MM velcro PDG6k
3
PDG.60071.02
Plate, Tooling Lippage/PDG6K
3
SAS.PIGTAIL
Reverse Polarity Pigtail *this is for the Bull 1250 and 460v
1
Page 43
SASE PDG 5000
A highly versatile 20” floor grinder with a compact, yet
powerful design. This allows it to fit easily through all
standard doorways. The head and motor are detachable,
allowing it to be transported up stairways in two easy to
carry pieces.
PDG 5000
PDG5000.01 (230 V)
Required Circuit
1Ø
3Ø
230 V
230 V
30 AMP
30 AMP
European version
Motor Output 3.7 kw 5 HP
Variable Speed
850 - 2000 RPM
Grinding Pressure
(without weights)
218 lbs
99 kg
Grinding Width
20 in
51 cm
Weight
372 lbs
169 kg
Dimensions
54 x 21 x 34 in
(L x W x H)
137 x 53 x 86 cm
(L x W x H)
• Compact design is easily maneuverable for retail and residential spaces
• Includes magnetic QCS plates
• Connects to SASE BULL 300 dust extractor for dust-freeoperation
• The head and motor can easily be removed from the frame for easier transportation
• Locking adjustment for angle of handle, no pins to lose
• Can achieve almost 90° tilt back
• No special tools are required to perform routine maintenance
• Uses same base plates as the PDG 6000 (200mm or 7 3/4”)
• Includes two 26 lbs weights
Page 44
Edge Pro 180
Is an aggressive, sleek, upright edge grinder made to
grind and polish around corners, edges, and tight areas.
With a 6” grinding path and extreme versatility, this
machine can do it all. SASE offers a full line of 6” metal
bond, resin bond, and copper bond tooling to meet all
your needs.
ITEM NUMBER
DG1492
Velcro plate
DG1492
Disc velcro plate
NB.13.109
Screw for velcro plate attachment
Edge Pro 180
DG.EDG180.02
Required Circuit
110 V
3.8 AMP
Motor Output 1 HP
Variable Speed
0 - 1200 RPM
Grinding Pressure
(without weights)
53 lbs
24 kg
Grinding Width
6 in
15 cm
Weight
120 lbs
54 kg
Dimensions
55 x 15 x 43 in
(L x W x H)
140 x 38 x 109 cm
(L x W x H)
• Variable speed control
• Heavy-duty steel frame construction
• Directional motor control keeps head against the wall
• Pivoting rear wheels allows grinding parallel to the wall
• Weights are positioned directly over grinding head for maximum down pressure
• 6” Grinding path for quick and effective polishing or grinding
• Comes with two 16 lb weights
• Connects to the SASE Bull 45 for dust free operation
Page 45
SASE SPYDER
An affordable edge solution for smaller surface prep jobs. Simplifies working with
edges which saves time and it is designed to operate while standing, avoiding wear
on your knees and back.
Edge Pro 180
DG.EDG180.02
Required Circuit
110 V
Motor Output 1 HP
Variable Speed
8,500 RPM
Weight
46 lbs
21 kg
Dimensions
28 x 21.5 x 38 in
(L x W x H)
71 x 55 x 96.5cm
(L x W x H)
• Ideal for surface prep on edges and in confined spaces
• Aggressive upright floor prep machine
• Guide handle allows control and pressure application to the center of the tool
• Halogen headlight
• Exclusive floating mechanism for maneuverability over uneven surfaces
• An affordable stand up edge grinder
• Includes your choice of 7" Diamond Cup Wheel
• Connects to the SASE Bull 45 for dust free operation
• Hinged Convertible 7" shroud allows for grinding right to vertical surfaces
Page 46
ITEM
DESCRIPTION
IDEAL USE
SAS.2000121
Xenith complete plate
assembly, 11" or 270mm
For PDG 8000
SAS.300104
Plate, Flex Plate
270mm (10 5/8")
For resin bond diamonds; flexibility of
plate allows you to reach low spots when
polishing. Fits SASE PDG 8000, 800 series,
G320, 3200 & other industry 32" grinders
PDG.80082.00
Plate, QCS Diamond Carrier
Steel, 270mm (10 5/8”)
Use with QCS for mounting metal bond
diamonds fits SASE PDG 8000
PDG.80183.10
Plate, Magnetic QCS Adapters Fits SASE PDG 8000
HOL.905210
Plate, QCS Diamond Carrier
Aluminum, 270mm (10 5/8")
HOL.906312
Plate, Magnetic QCS Adapters Fits HTC 800
HOL.905218
Plate, Flex Plate System
Complete 270mm (10 5/8")
For mounting 3" puck style resin bonds. Fits
SASE PDG 8000, 800 series, G320, 3200 &
other industry 32" grinders
HOL.905160
Plate, Bolt On Metal Bond
Aluminum, 270mm (10 5/8")
Use to mount bolt-on style metal bond
diamonds. Fits SASE PDG 8000, 800 series,
G320, 3200 & other industry 32" grinders
HOL.905125
Plate, Diamond carrier
Aluminum 270mm (10 5/8”)
For mounting 3” puck style
diamonds using the Flex Plate System (see
Item HOL.905218)
HOL.905192
Foam Riser with Velcro
270mm (10 5/8")
Replacement foam riser with velcro for Flex
Plate System (see Item HOL.905218)
HOL.905196
Plate, Aluminum Base
270mm (10 5/8")
Replacement base plate for Flex Plate
System (see HOL.905218)
HOL.906216
Complete Xenith Flex Plate
Assembly 270mm (10 5/8”)
For mounting 11” Xenith pads to SASE
PDG 8000, 800 series, G320, 3200 & other
industry 32" grinders
HOL.905130
Plate, Diamond Carrier
Aluminum, 270mm (10 5/8”)
For mounting puck style diamonds fits SASE
PDG 8000 & 800 series grinders
diamonds. Fits 800 series, G320, 3200 &
other industry 32" grinders
Page 47
ITEM
DESCRIPTION
IDEAL USE
HOL.905220
Plate, Flex Plate System
Complete, 240mm (9 3/8")
Fits Diamatic 780
HOL.902240
Plate, Aluminum Base 230mm
(9")
Replacement base plate for Flex Plate
System (see HOL.905221)
HOL.905221
Flex plate system, 3" puck style
230mm
Fit 650*
HOL.905020
Plate, Aluminum Recessed 3"
Puck Style 240mm (9 3/8")
For mounting 3" puck style resin bonds.
Fits Diamatic 780
HOL.905214
Plate, QCS Metal Bond 240mm
(9 3/8")
Use with Quick Change System for
mounting metal bond diamonds. Fits
Diamatic 780
HOL.907830
Plate, QCS Magnetic Adapters
Fits Diamatic 780
HOL.901240
Plate, Bolt-On Metal Bond
240mm (9 3/8")
Use to mount bolt-on style metal bond
diamonds. Fits Diamatic 780
HOL.905212
Plate, QCS Diamond
Carrier, Aluminum 230mm (9")
Use with Quick Change System for
mounting metal bond diamonds. Fits 500,
650, other industry 24-25" grinders
HOL.907315
for HTC
Fits HTC 500 & 650
HOL.905180
Plate, 230mm (9")
Fits 500 and 650. For mounting 2” post
and puck style resins
HOL.905191
Foam Riser 230mm (9")
HOL.905216
Plate, Diamond Carrier 185mm
(7 ¼")
diamonds. Fits Diamatic 535 & 580
HOL.907340
for Diamatic
Fits Diamatic 535 & 580
HOL.905010
Plate, Aluminum Recessed 3"
Puck Style 185mm (7 ¼")
For mounting 3" puck style resin bonds.
Fits Diamatic 535 & 580
HOL.901185
Plate, Bolt-On Metal Bond
185mm (7 ¼")
For mounting bolt-on metal bond or PCD
Diamonds. Fits Diamatic 535 & 580
Page 48
Fits 500 & 650
ITEM
DESCRIPTION
IDEAL USE
PDG.50040.00
Plate, QCS Diamond Carrier Steel,
200mm (7 3/4")
Use With Quick Change System for
mounting Metal Bond Diamonds to
SASE PDG 6000 & PDG 5000
PDG.50160.20
Plate, with Magnetic QCS Adapters
Fits SASE PDG 6000 & PDG 5000
PDG.50015.00
Base Plate for PDG 6000 3" Flex
Plate System 200mm (7 3/4")
HOL.905193
Foam Riser for PDG 6000
200mm (7 3/4")
PDG.60071.02
Top Plate for PDG 6000 Foam Flex
System 200mm (7 3/4" )
HOL.905234
Plate, Xenith Pad
SAS.238100
Plate, QCS for Husqvarna
Fits PG 820
SAS.259000
Plate, QCS Magnetic Adapters for
Husqvarna
Fits PG 820
SAS.268700
Plate, QCS Magnetic Adapters for
Husqvarna
Fits PG 680 & PG 530
SAS.249200
Plate, QCS Adapters for Husqvarna Fits PG 680 & PG 530
HOL.2000148
Plate, COMBIFLEX
Fits SCANMASKIN 800
SAS.800955
Plate, COMBIFLEX with Magnetic
QCS Adapters
Fits SCANMASKIN 800
HOL.2000146
Plate, COMBIFLEX
Fits SCANMASKIN 650i
SAS.800745
Plate, COMBIFLEX with Magnetic
QCS Adapters
Fits SCANMASKIN 650i
Page 49
ITEM
DESCRIPTION
IDEAL USE
PDG.HA001.20
Flexhead with red spring
Fits HTC 800 Classic & 950 RX
HOL.200099
Frankfort Style Diamond Tool
Holder for Eagle Machine
Fits Eagle machine
HOL.905227
Adapter, for Lavina to SASE
QCS
Fits Lavina machine
HOL.904132
Adaptor, Universal QCS
Metal Bond
Mounts to most diamond carrier plates,
allows for use of QCS on most machines
SAS.904175
Adaptor, Universal QCS
Magnetic
Mounts to most diamond carrier plates,
allows for use of QCS on most machines
HOL.902120
Adaptor, Assembled tear drop For mounting post style or 2" mini puck
adapter with velcro plate
resin bond diamonds to QCS plate
SAS.500117
Adaptor replacement,
Vulcanized velcro 2" flex
plate
Mounts to SASE flex plate & tear drop
adapter
SAS.LIPADP
Adaptor, Assembled with
Vulcanized velcro plate QCS
lippage 3" puck holder
Mounts to 3" puck style resins, SC30
SAS.10017
Adaptor replacement
Mounts to 3" puck adaptor
HOL.904143
Holder, 3" QCS
For mounting 3" puck style resins, SC30
SAS.ADPNON
Adapter, 3" hockey puck
without lippage, velcro
For mounting 3" puck style resins
HOL.905197
3" Foam Riser
For mounting 3" puck style resins
NB.13.127
Screw
For use with velcro plate & 2" flex plate
NB.04.08
Screw
For use with velcro plate with tear drop
Page 50
SASE Bull 1250EBS
The SASE Bull 1250EBS is a three phase dust extractor with an elongated bag system.
The EBS consists of a 60' continuous bagging system. This allows for the easy and
environmentally smart disposal of the concrete dust. Like the standard Bull 1250 it is
constructed of heavy gauge steel making it the
most durable dust extractor in the industry. For
maximum performance SASE recommends that
you use a Bull preseparator to create a three
phase filtration system. This dust extractor is
powerful enough to handle the work load of any
industry 3 or 4 head grinder.
SASE Bull 1250EBS
VAC.BULL.1250.460V
VAC.BULL.1250.230V
VAC.BULL.1250.380V
Required circuit
3Ø
3Ø
3Ø
460 V
230 V
380 V
Air Flow 388 CFM
Lift
132 in
335 cm
Weight
500 lbs
227 kg
Dimensions
48.5 x 27 x 70 in
(L x W x H)
122 x 69 x 178 cm
(L x W x H)
• Elongated bags with over 42 sq/ft of filter area
• Quiet - only 78 dB
• Manual filter shaker system
• 8.5 HP regenerative motor
• Soft Start
• Constructed of 14 gauge steel for longevity in industrial use
Page 51
SASE Bull 1250PRO
The SASE Bull 1250PRO is the newest of dust extractors to the SASE Bull line.
This is a propane powered dust extractor. This allows the operator to operate
without the use of the hassles of
using power cords. Like the other
Bull 1250's it too is constructed of
heavy gauge steel making it the most
durable dust extractor in the industry.
This dust extractor is powerful
enough to handle the work load of
any industry 3 or 4 head grinder.
SASE Bull 1250PRO (Propane)
VAC.BULL.1250.PRO
Motor Kawasaki 603cc FS Series
Air Flow 388 CFM
Lift
132 in
335 cm
Weight
696 lbs
315.7 kg
Dimensions
62 x 30 x 71 in
(L x W x H)
157.5 x 76x 180 cm
(L x W x H)
•
•
•
•
•
•
Over 62 sq/ft of filter area
Secondary HEPA filtration
Manual filter shaker system which is extremely durable, dependable and easy to use
For use anywhere that power is not available or where power cords are not permitted
Low emissions EPA & CARB
3-way catalytic muffler lowers CO, HC and NOx emissions
Page 52
SASE Bull 1250
A heavy-duty industrial vacuum, designed for
containment of large quantities of fine concrete dust.
It is one of the largest, most effective dust conctrol
vacuums in the concrete industry.
ITEM NUMBER
VAC.NZ2WAND 2" Vac wand
VAC.NZ2TOOL
2" Vac floor nozzle
VAC.NZ2.0IRD
2" Vac wand and floor nozzle
VAC.HS3.00060 3" Hose clear with yellow, sold by the foot
VAC.4436BAG
4-Mil bags
SASE Bull 1250
VAC.BULL.1250.440.SS
VAC.BULL.1250.220.SS
3Ø
3Ø
3Ø
Required Circuit
460V
230V
380V
40 AMP
60 AMP
60 AMP
Air Flow 388 CFM
Lift
132 in
335 cm
Weight
570 lbs
258.5 kg
Dimensions
53 x 30 x 71 in
(L x W x H)
134.5 x 76 x 180 cm
(L x W x H)
• Designed specifically for use with diamond grinders
• Over 62 sq ft of filter area
• Quiet - only 75 dB
• Secondary HEPA filtration
• Easy to clean, shaker type filters
• 8.5 Hp regenerative motor
• Built-in soft start feature
• Distribution box integrated into vac
• Oversize dust bin uses optional heavy mil plastic bags for easy emptying (sold separately)
• Constructed of 14 gauge steel for longevity in industrial use
• Includes 50' of 3" hose and 100' of heavy duty power cord (wand & floor nozzle sold separately)
Page 53
SASE Bull 300
The most powerful 110 Volt vacuum available in the
polished concrete and surface prep industry.
ITEM NUMBER
VAC.NZ2WAND
2" Vac wand
VAC.NZ2TOOL
2" Vac floor nozzle
VAC.NZ2.01RD
2" Vac wand and floor nozzle
VAC.HS3.00060
3" Hose clear with yellow, sold by the foot
VAC HS2.00000
2" Hose yellow flexible, sold by the foot
SAS.300.SURGE
Surge Protector for Bull 300
SASE Bull 300
VAC.BULL300.02 (2" hose)
VAC.BULL300.03 (3" hose)
Required Circuit
110 Volt
Air Flow 320 CFM
Lift
70 in
177 cm
Weight
165 lbs
75 kg
Dimensions
29 x 20 x 64.5 in
(L x W x H)
73.5 x 51 x 163 cm
(L x W x H)
• The industry’s most powerful 110 volt vacuum
• Continuous duty operation
• Secondary backup filtration system (HEPA)
• 320 CFM, utilizing 37 sq ft of filter area
• Primary filters exceed industry standards
• Filters can be cleaned by simply pulling the filter cleaning lever
• 20 gallon equalized pressure container uses optional standard trash liners for dust containment
Page 54
SASE Bull 240
The Bull 240 is a powerful single phase dust
extractor with an elongated bag system. The dust
extractor has a manual jet pulse cleaning system
along with two HEAP filters and seven Teflon coated
sock filters. Attached it to the SASE Dust Duty
preseparator for a three stage filtration system to
provide maximum performance. The ideal dust
extractor to connect to a smaller grinder or for doing
edge work.
SASE Bull 240
VAC.BULL240
Required Circuit
1Ø
120 Volt
Air Flow 240 CFM
Lift
132 in
240 cm
Weight
93 lbs
42 kg
Dimensions
22 x 31.5 x 44 in
(L x W x H)
56 x 80 x 112 cm
(L x W x H)
• Dual filtration at an economical price
• Continuous elongated bagging system
• Quiet - only 65dB
• Primary Teflon with 7 sock filtration
• Secondary filtration with 2 HEPA filters
• Easy to operate purge handle
• Includes 28' of 2" hose, vacuum wand with floor tool
Page 55
SASE Bull 45
A small, compact vacuum designed to perform under the rigorous conditions imposed
when grinding concrete. It is ideal to use with hand tools when grinding concrete,
preparing concrete surfaces and removing coatings.
ITEM NUMBER
SAS.45HEPA
Bull 45 hepa filter assembly with gasket
SAS.45BAG
Replacement paper filter
SAS.45WHEEL
Caster wheel for Bull 45
SAS.45NCBAG
Replacement never clog cloth filter bags
SASE Bull 45
VAC.BULL45
Required Circuit
2 Hp
110 Volt
Air Flow 110 CFM
Lift
70 in
117.8 cm
Weight
38 lbs
15 kg
Dimensions
18 x 18 x 39 in
(L x W x H)
46 x 46 x 99 cm
(L x W x H)
• HEPA filtration
• 10 Gallon dry vac only
• Quiet operation
• Ideal for use with hand tools
• For use with the Edge Pro 180, SASE hand tools SC50, SC70 and SASE SC8E Scarifier
• Included accessories; 10ft of 1.5” crush proof hose, 48’ cord, 14” floor brush, 3” round dusting brush, 2
piece metal wand, 17” crevice tool
Page 56
The BULL Preseparator
A cyclonic action that will capture up to
80% of the dust particles prior to traveling
on to the dust extractor, thus reducing the
frequency of emptying and increasing the
filter life on the dust extractor.
When used with the Bull 1250, it
becomes a 3-stage filtration system.
Bull Preseparator
NWA.10100
Weight
159 lbs
72 kg
Dimensions
43 x 29 x 68 in
(L x W x H)
109 x 74 x 173 cm
(L x W x H)
• Connects between the grinder and the vac to add a third stage filtration process
• Cyclonic action traps up to 80% of the dust particles before they reach the filters
• Extends the dust extractor filter life
• Uses the SASE elongated vacuum bag (continuous bagging system)
• Grounding chain to reduce static electricity
• Heavy-duty casters
• Minimizes down time to clean the filters and remove the dust for increased productivity
• Constructed of 14 gauge steel for durability
• Low to ground hose connections to prevent the unit from tipping over
• Comes with 3” hose and Camlock fittings
Page 57
Dust Duty Preseparator
A cyclonic action that will capture up to 90% of the dust
particles prior to traveling on to the dust extractor, thus
minimizes down time to clean the filters & remove the
dust for increased productivity. Connects to the Bull 240
or Bull 45 Vacuums.
ITEM NUMBER
DESCRIPTION
SAS.PS.4500
Preseparator for Bull 240 and Bull 45
Connects between the SC50 and vac to add a
3-stage filtration system.
Vac Nozzles
ITEM NUMBER
DESCRIPTION
VAC.NZ2.TOOL
2” Floor Nozzel with Brush and Squeegee
VAC.319183
Rubber Squeegee Blade Strip Set 20”
VAC.319186
Brush Strip Set 20”
SAS.WALETALE
Attaches to any 2” vac hose to eliminate dust on the job
site when pouring and mixing cementitious products
Vacuum Bags
ITEM NUMBER
DESCRIPTION
IDEAL USE
VAC.4436BAG
4-mil Bags
Bull 1250
SAS.0009510
SASE Elongated Vacuum Bag (4 per box)
Bull Preseparator, T-75, & 86D
Page 58
Hose Cuffs
ITEM NUMBER
DESCRIPTION
VAC.CF3.00000
Cuff, 3" Hose To 3" Tool
VAC.CF2.0HOSE
Cuff, 2" Hose To 2" Hose
VAC.CF2.0TOOL
Cuff, 2” To 1.5" Tool
VAC.CF2.00000
Cuff, 2" to 2" tool
VAC.CF1.50200
Cuff, 1.5" threaded to 2" slip for Bull 45
Camlock Accessories
ITEM NUMBER
DESCRIPTION
VAC.101150.1
Plug, Machine Dust 3", for the Bull 300
VAC.10121
Splitter, 3x2x2
VAC.10117
Camlock, 3” Female x 3” Hose Shank Aluminum
VAC.10111
Camlock, 3" male x 3” hose shank for PDG8000 & PDG6000
VAC.10127
Camlock, 3” Male x 2” Hose Shank Aluminum
VAC.10113
Camlock, 3" Female x 3” Hose Shank Plastic
VAC.10125
Camlock 3” Female x 2” Hose Shank Aluminum
VAC.10123
Camlock 3” Male x 3” Male Aluminum Coupler
VAC.10116
Gasket For Female Coupler 3”
VAC.10115
Dust Plug For Female Camlock
VAC.10114
Camlock, 3” Dust Cap Male
VAC.10112
Camlock, 3” Plastic Male Coupler
Vac Connectors & Reducers
ITEM NUMBER
DESCRIPTION
VAC.WRD3.020
3" x 2" Hose Reducer
VAC.CPL3x3
3” x 3” Locking Coupler
Vac Y Adaptors
ITEM
DESCRIPTION
VAC.YAD3x3x3
3" x 3" x 3" Y Adaptor
VAC.YAD3x2x2
3" x 2" x 2" Y Adaptor
Page 59
SC12E Scarifier
SC12E Scarifier
SC.12.041 (460 V)
SC.12.040 (230 V)
SC.12.020 (Gas)
Required Circuit
3Ø
3Ø
Gas
460 V
230 V
5 Hp
5Hp
13 Hp
30.5 cm
Max Working Width
12 in
Distance to Vertical Surface
3 in
8 cm
Weight
350 lbs
159 kg
Dimensions
52 x 22 x 45 in
(L x W x H)
132 x 56 x 114 cm
(L x W x H)
• The industry’s most durable and productive scarifier
• Side access drum assembly for quick and easy cutter changes
• Heavy-duty hex shaft
• Sealed bearings and no exposed moving parts
• Equipped with an emergency stop safety cord
• Connects to SASE BULL 300 vac for dust-free operation
SC12E / VA30S (4-Shaft Drum)
ITEM NUMBER
DESCRIPTION
630.LT8.64/196
DRUM W/TCT CUTTERS (64/196)
630.LT12.72/180
DRUM W/TCT CUTTERS (72/180)
630.LRM.12/208
DRUM W/MILLING CUTTERS (12/208)
630.LRM.16/160
630.LRM.20/120
800.LT8.64/196
CUTTER SET OF TCT (64/196)
800.LT12.64/196
CUTTER SET OF TCT (64/196)
800.LRM.12/208
CUTTER SET OF MILLING (12/208)
800.LRM.16/160
800.LRM.20/120
Page 60
SC10E Scarifier
SC10E Scarifier
SC.10.040 (230 V)
SC.10.042 (230 V)
SC.10.044 (460 V)
SC.10.020 (Gas)
230 V
230 V
460 V
5 Hp
5 Hp
13 Hp
9 Hp
Max Working Width
10 in
25 cm
2.5 in
6 cm
Weight
240 lbs
109 kg
Dimensions
39 x 18 x 45 in
(L x W x H)
99 x 46 x 114 cm
(L x W x H)
Required Circuit
1Ø
3Ø
3Ø
Gas
• Ideal for small spaces, yet powerful enough for larger projects
• Compact for easy handling and transportation
SC10E / VA25S
(w / 9/16" Flail Shafts)
ITEM NUMBER
ITEM DESCRIPTION
800.MS.189/00
SET OF STEEL (189/00)
652.0U.MS.189/00
DRUM OF STEEL (189/00)
800.MT8.81/108
SET OF TCT (81/100)
652.0U.MT8.81/108
DRUM OF TCT (81/100)
800.MRM.27/81
SET OF MILLING (27/100)
625.0U.MRM.27/81
DRUM OF MILLING (27/100)
Page 61
SC8E Scarifier
SC8E Scarifier
SC.08.040 (110 V, 1Ø)
SC.08.042 (230 V, 1Ø)
SC.08.044 (230 V, 3Ø)
SC.08.046 (460 V, 3Ø)
SC.08.020 (Gas)
110 V
230 V
230 V
460 V
2 Hp
3 Hp
3 Hp
3 Hp
5 Hp
Max Working Width
8 in
20 cm
2 in
5 cm
Weight
92 lbs
42 kg
Dimensions
47 x 14 x 34 in 119 x 36 x 86 cm
(L x W x H)
(L x W x H)
1Ø
1Ø
3Ø
3Ø
Gas
Required Circuit
• Uncompromising performance in a small size
• Compact for easy handling and transportation
SC8E / FR200
Page 62
ITEM NUMBER
DESCRIPTION
800.SS.260/00
SET OF STEEL (260/00)
625.SS.260/00
DRUM OF STEEL (260/00)
800.ST5.72/100
SET OF TCT (72/100)
625.ST5.72/100
DRUM OF TCT (72/100)
800.SRM.20/100
SET OF MILLING (20/100)
625.SRM20/100
DRUM OF MILLING (16/160)
Scarifier Steel Cutters
For removal of coatings for surface prep without damaging the
underlying surface and road markings removal.
ITEM
DESCRIPTION
ID
OD
THICKNESS
FITS MACHINES
615.01.02
Angle Cutter
16mm
(5/8”)
41.12mm
(1 5/8”)
3.13mm
(1/8” )
SC8E, FR200, FS200
615.01.04
Small
16mm
(5/8”)
41.13
(1 5/8”)
3.25mm
(1/8” )
SC8E, FS200, FR200,
644.04.06
Large
15.6mm
(5/8”)
50.13mm
(1 31/32”)
3.83mm
(9/64” )
SC10E, VA25S,
CPM10, SPS10
CHS.30.01 Large tooth
26.4mm
(1 3/64”)
75.5mm
(2 31/32”)
4.8mm
(3/16” )
CHS.30.02 Large Tooth
29.8mm
(1 11/64”)
75mm
(2 61/64”)
4mm
(5/32”)
SC12E, Truck
Grinders, VA30S
SC12E, Truck
Grinders, VA305
Rotary
Replacement cutter for most walk-behind and skid steer rotary grinders.
ITEM
DESCRIPTION
FITS MACHINES
681.01.18
Individual Cutter 48 pins
TLR7, PM Eraser, LNX8, SCR7, and X3 Triple
Head Eraser
681.01.15
Set of 3 144 pins
TLR7, PM Eraser, LNX8, SCR7, and X3 Triple
Head Eraser
Page 63
Scarifier Tungsten Cutters
Used for surface prep and concrete grinding applications for the removal of
hard coatings.
ITEM
DESCRIPTION
ID
OD
THICKNESS
FITS MACHINES
615.01.07
Small 5pt
16mm
(5/8” )
40mm
(1 9/16”)
6mm
(15/64”)
SC8E, FR200, FS200,
CPM8, SPS8
615.01.14
Small 6pt
15.2mm
(19/32” )
44mm
(1 47/64”)
6mm
(15/64”)
SC8E, FR200, FS200,
CPM8, SPS8
615.08.31
Medium 8pt
18.3mm
(23/32” )
56.37mm
(2 7/32” )
6mm
(15/64”)
SC10E, VA25S, CPM10,
SPS10
615.08.30
Medium 8pt
(special order)
25.2mm
(63/64” )
55.6mm
(2 3/16”)
6mm
(15/64”)
RM320
620.01.13
Large 8pt
30mm
(1 3/16” )
81mm
(3 3/16” )
7.8mm
(5/16” )
SC12E, VA30S
620.01.14
Large 12pt
26mm
(1 1/32” )
80mm
(3 9/64” )
8mm
(5/16” )
Truck Grinder, SC12E,
VA30S
630.03.10
Large 12pt
30.16mm
(1 3/16” )
77.79mm
(3 1/16” )
7.94mm
(5/16” )
Truck Grinder
630.03.13
Large 12pt
33.02mm
(1.30” )
80mm
(3 9/64” )
7.84mm
(5/16” )
Truck Grinder
Scarifier Milling Cutters
Used for the removal of thick to thin mil coatings.
ITEM
DESCRIPTION ID
OD
THICKNESS
FITS MACHINES
615.01.11
Small
16mm
(5/8” )
40
(1 9/16” )
22.23mm
(7/8” )
SC8E, FR200, FS200
644.01.13
Medium
18mm
(23/32” )
57mm
(2 1/4”)
20mm
(25/32”)
VA25S, SC10E, CPM8,
CPM10, SPS10
630.03.08
Large
29.5mm
(1 5/32”)
80mm
(3 9/64”)
40mm
(1 9/16”)
SC12E, VA30S
630.03.09
Large thin
29.5
(1 5/32”)
80mm
(3 9/64”)
20mm
(2 5/32 ”)
SC12E, Truck Grinder,
VA30S
Page 64
We carry a full line of drums and flail shafts for most
walk-behind and truck grinders.
8” Scarifier Drums
Item Number
SC.08.500
8” Drum for FR200.SC8E Scarifier
Item Number
65051
8” Drum for CPM8/SPS8 Scarifier
Item Number
SC.10.505
10” Drum for VA25S/SC10E Scarifier
Item Number
64251
10” Drum for CPM10/SPS10 Scarifier
Item Number
SC.12.505
12” Drum for VA30S/SC12E Scarifier
8” Flail Shafts
Item Number
SC.08.510
8” Drum Flail Shaft
Item Number
20150
1/2” Diameter Flail Shaft for CPM8/SPS8 Drum
Item Number
90150
9/16 Diameter Flail Shaft for CPM8/SPS8 Drum
10” Flail Shafts
Item Number
SC.10.510
10” Drum Regular Flail Shaft
Item Number
SC.10.520
10” Drum Super Flail Shaft
Item Number
21490
CPM10/SPS10 Drum Flail Shaft
12” Flail Shafts
Item Number
SC.12.500
12” Drum Flail Shaft
Spacers
ITEM
FITS MACHINES
625.06.09A
SC8E Drums
625.06.916
SC10E Drums
630.03.06
SC12E Drums
625.07.916
SPS/CPM
615.08.80
Truck Grinders
Page 65
SASE Lightning
The most cost effective ride-on floor scraper on the market! Weighing in at
1,950 pounds and powered by a robust 25 HP Kohler engine, this machine is
a real workhorse.
At only 26” wide and 51.5” long, the Lightning is small enough to fit into the
tightest of places.
SASE Lightning
OEM.LIGHTNING
Kohler propane 25 HP
Speed
330 ft per min
100.5 meters per min
Weight
1950 lbs
885 kg
Removalbe weights
670 lbs
304 kg
Dimensions
51.5 x 26 x 51 in
(L x W x H)
131 x 66 x 130 cm
(L x W x H)
• Most powerful and cost effective floor scraper in its class
• Triple blade action to maneuver, angle and pivot the scraper blade
• Compact design for tight spaces
• Powerful 25 HP Kohler propane engine
• Single joystick control for speed, steering and direction
• Ideal for the removal of VCT, hardwood and carpet
Page 66
SASE Hurricane
Ride-on floor scraper offers the most versatility of all the machines we sell. It is compact
enough to get into the smallest of rooms and elevators, yet heavy and powerful enough
to handle all removal jobs.
If you are looking for durability and performance, try this little powerhouse on your next
flooring removal or surface prep job.
SASE Hurricane
OEM.HURRICANE
Kohler propane 25 HP
Speed
440 ft per min
134 meters per min
Weight
2800 lbs
1270 kg
Removalbe weights
1494 lbs
678 kg
Dimensions
58 x 25 x 51 in
(L x W x H)
147 x 63.5 x 130 cm
(L x W x H)
• Compact design maneuvers through hallways with ease
• Powerful 25 HP Kohler propane engine
• Single joystick control for speed, steering, and direction
• Ideal for the removal of VCT, hardwood, laminates, rubberized coatings and carpet
Page 67
SASE Cyclone
The battery powered ride-on floor scraper that was developed to meet the demands
of today’s contractor. The cyclone offers all of the power and production of a
propane powered machine, yet it runs quieter with zero emissions and fumes.
Weighing in at 2,800 pounds and travel speeds up to 350 ft per minute, the SASE
Cyclone will remove virtually all floor covering materials in a single pass. The
Cyclone comes standard with a 230 volt charger.
SASE Cyclone
OEM.CYCLONE
Battery powered engine
Speed
350 ft per min
107 meters per min
Weight
2800 lbs
1270 kg
Removalbe weights
720 lbs
326 kg
Dimensions
51.5 x 24.5 x 55 in
(L x W x H)
131 x 62 x 140 cm
(L x W x H)
• Most efficient battery powered floor scraper
• Triple blade action to maneuver, angle & pivot the scraper blade
• Fits through standard doorways and on elevators
• Comes standard with 230 volt charger
• Single joystick control for speed, steering & direction
• Up to 12 hour run time on a single full charge
• Ideal for the removal of VCT, laminates and carpet
• Remove up to 6 batteries at 120 lbs ea to transport unit. Replace batteries before starting the unit
Page 68
SASE Twister
The most productive ride-on floor scraper in the industry. When it comes to tough removal
jobs or the need for speed, there simply is no machine that will compare.
The SASE Twister is built with ample horsepower and weighs over 4,200 lbs.The
hydrostatic drive system combined with a patented blade positioning mechanism make
this floor scraper a flooring removal powerhouse.
SASE Twister
OEM.TWISTER
Ford propane 58 HP
Speed
500 ft per min
152.5 meters per min
Weight
4200 lbs
1905 kg
Removalbe weights
2017 lbs
915 kg
Dimensions
62 x 26 x 72 in
(L x W x H)
157 x 66 x 183 cm
(L x W x H)
• Ideal for heavy-duty flooring removal
• Compact design maneuvers through hallways with ease
• Powerful 58 HP Ford 1.6 liter propane engine
• Single joystick control for speed, steering, and direction
• Ideal for the removal of VCT, hardwood, laminates, ceramic tile, rubberized coatings, carpet and more
Page 69
Flat Blades
For removal of VCT and thin floor
coverings.
Heavy Duty Blades
For removal of thicker coatings,
rubberized coverings, and VCT.
Carpet Blades
For removal of carpet.
Page 70
ITEM
DESCRIPTION
XTFBL04
Flat Blade, 4"
XTFBL06
Flat Blade, 6"
XTFBL08
Flat Blade, 8"
XTFBL09
Flat Blade, 9” Made to order
XTFBL10
Flat Blade, 10"
XTFBL12
Flat Blade, 12"
XTFBL13
Flat Blade, 13”
XTFBL14
Flat Blade, 14"
XTFBL15
Flat Blade, 15"
XTFBL16
Flat Blade, 16”
XTFBL18
Flat Blade, 18"
XTFBL20
Flat Blade, 20"
XTFBL24
Flat Blade, 24"
XTFBL26
Flat Blade, 26” Made to order
ITEM
DESCRIPTION
XTHDB04
Heavy Duty Blade, 4"
XTHDB06
XTHDB08
XTHDB10
XTHDB12
XTHDB14
Heavy Duty Blade, 14" Made to order
XTHDB15
XTHDB20
XTHDB24
ITEM
DESCRIPTION
XTCBL06
Carpet Blade, 6"
XTCBL08
Carpet Blade, 8"
XTCBL09
Carpet Blade, 9”
XTCBL10
Carpet Blade, 10"
XTCBL12
Carpet Blade, 12"
XTCBL13
Carpet Blade, 13"
XTCBL15
Carpet Blade, 15"
XTCBL16
Carpet Blade, 16”
XTCBL18
Carpet Blade, 18"
XTCBL20
Carpet Blade, 20"
XTCBL24
Carpet Blade, 24" Made to order
XTCBL26
Carpet Blade, 26” Made to order
XTCBL28
Carpet Blade, 28” Made to order
Scraper Accessories
For use on SASE Floor Scrapers.
ITEM
DESCRIPTION
FITS MACHINE
OEM.00TT2
Tile Tooth
SASE Cyclone, Twister,
Lightning*, Hurricane*
OEM.00TTA
Tile Tooth Holder
Lightning*, Hurricane*
OEM.TWA001
Travel Dolly
(Special Order)
Lightning, Hurricane
* The recommended machines for the removal of tile are the Twister and
Cyclone only
Racatac
ITEM NUMBER
DESCRIPTION
SAS.RACATAC
Work with both hands, while supporting your back and knees.
Fully adjustable seat and chest support
Rapid Strip
ITEM NUMBER
DISC SIZE
DESCRIPTION
SAS.04015
5”
Coarse wheel used to sand structural
polyurethane off of polished concrete
Hand Grinder Shrouds
ITEM
DESCRIPTION
FITS MACHINES
SC70.900918
SASE 7“ Convertible Shroud
SC70 and other industry 7”
hand grinders
SC50.900900
5” Shroud, Complete Assembly
hand grinders
SC50.900001
Shroud, Clear Hard Plastic
hand grinders
SC51.900004
Shroud, 5” Universal Clear Dust Shroud
hand grinders
Page 71
HAND TOOLS
SC70 7" hand held grinder
SC70.900000
110 V
15 AMP
RPM 8500
7" DISC SIZE (18 CM)
22" TOOL LENGTH (56 CM)
• Hand held dustless grinder
• Ideal for edge work
• Removes mastics & coatings
• Hinged convertible shroud
• Vacuum port
• Loop handle
• Hooks to Bull 45 Vacuum
SC50 5" hand held grinder
SC51.800104
110 V
15 AMP
RPM 600-3,000
5" DISC SIZE (13 CM)
18.5" TOOL LENGTH (47 CM)
• Hand held dustless grinder
• Ideal for edge work
• High torque for maximum production without motor burn out
• Removes mastics & coatings
• Hinged convertible shroud
• Includes 5" rigid back up pad
• Hooks to Bull 45 Vacuum
Corner Polisher
SAS.FMM250
110 V
15 AMP
RPM 10,000 - 19,500
3" TRIANGLE DISC SIZE (13 CM)
12" TOOL LENGTH (30 CM)
• Ideal for finishing corners, around doorways, and
stairways on your polished concrete job
• Variable-speed triangular sanding pad
• Oscillates between 10,000 RPM& 19,500 RPM
• Smooth, quiet operation
• Includes carrying case for corner polisher
Page 72
NEEDLE SCALERS
SC49 Pneumatic Needle Scaler
SAS.SC49CS (3MM)
SAS.SC49CS4 (4MM)
Air powered 75 - 100 PSI
Size
14.7" length 5.5 CFM
37 cm lengh 14 cm CFM
Weight
11 lbs
5 kg
Needles
49 medium (3mm) optional 35 coarse (4mm)
• Heavy-duty scaler works quickly for the toughest jobs
• Various needle sizes & configurations
• Optional shroud available
SC28 Pneumatic Needle Scaler
SAS.SC28CS2 (2mm)
SAS.SC28CS (3mm)
SAS.SC28CS4 (4mm)
3500 BPM
Size
Weight
6.5 lbs
3 kg
Needles
28 medium (3mm)
19 course (4mm)
Optional 65 fine (2mm)
• Lightweight but powerful to quickly clean & resurface metal & concrete
• Various needle sizes & configurations
• Optional shroud available
SC28 AVS Pneumatic Anti-Vibration Needle Scaler
SAS.SC28AVS2 (2mm)
SAS.SC28AVS (3mm)
SAS.SC28AVS4 (4mm)
2930 BPM
Size
Weight
7.5 lbs
3.4 kg
Needles
28 medium (3mm)
19 course (4mm)
Optional 65 fine (2mm)
•
•
•
•
Lightweight but powerful to quickly clean & resurface metal & concrete
Anti-vibration for less operator fatigue
Various needle sizes & configurations
Optional shroud available
Page 73
Scaler Needles
ITEM
DESCRIPTION
FITS MODEL
SAS.SC.036
Needles, 2mm Blunt End, 65/Set 34B and 28
SC28, SC28AVS, 34B, NP34
SAS.SC.037
Needles, 3mm Chisel Point 28/Set 34B and 28
SAS.SC.038
Needles, 4mm Chisel Point 19/Set 34B and 28
SAS.SC.039
Needles, 3mm Chisel Point, 49/Set 45B and 49
SC49, 45B
SAS.SC.040
Needles, 4mm Chisel Point, 35/Set 45B and 49
SC49, 45B
Needle Holders
ITEM
DESCRIPTION
FITS MODEL
SAS.SC.018
Holder, 2mm Needle 34 and 28 Series
SAS.SC.019
SAS.SC.020
SAS.SC.031
SC49, 45B
SAS.SC.053
SC49, 45B
Needle Shrouds
ITEM
DESCRIPTION
FITS MODEL
554.00.VC
Shroud Complete, 34 and 28 Series
515.00VC
Shroud Complete, 45 and 49 Series
SC49, 45B
ITEM
DESCRIPTION
FITS MODEL
550.00.00
Brush, Long Vacuum 23
SC28, SC28AVS, 34B, B/NP
550.00.01
Brush, Short Vaccumm 23
SC28, SC28AVS, 34B, B/NP
550.00.02
Brush, Vacuum
SC49, 45B
Needle Brushes
Page 74
MISCELLANEOUS
EQUIPMENT & INSTRUMENTS
27" High Speed WET Burnisher
SAS.WET.27BURNISHER
18 HP Kawasaki
12 V Battery Starter
1800 RPM
Burnishing Width
27 in Pad Size
65.5 cm
Dimensions
36 x 50 in
(L x W)
91 x 127 cm
(L x W)
Weight
355 lbs
161 kg
• Ultra low profile: 3 ¾"
• Solid steel body
• Minimal dust without a vacuum
• Hose connects to SASE Bull 45
• Two 13 lb. weights provide additional head pressure & heat generation
• Emissions monitor shuts down engine if CO levels rise
Page 75
27" High Speed Burnisher
27" High Speed Burnisher
SAS.27BURNISHER
18 HP Kawasaki
12 V Battery Starter
1800 RPM
Burnishing Width
27 in Pad Size
65.5 cm
Dimensions
29 x 53 in
(L x W)
73.5 x 134.5 cm
(L x W)
Weight
240 lbs
109 kg
• Ultra low profile: 3 ¾"
• Solid steel body
• On-board dust control
• Hose connects to SASE Bull 45
• Two 13 lb. weights provide additional head pressure & heat generation
• Emissions monitor shuts down engine if CO levels rise
• Metal pad holder for heat deflection & flatter pad
Page 76
SC320 Scarifier / Shaver / Planner
The industry’s largest and most aggressive concrete floor scarifer / shaver / planner.
*The standard recommended blade configuration is:
64 blades 63 3mm spacers 1 1mm spacer
*Scarifier configuration special order
ITEM
DESCRIPTION
SC.12.520
Diamond Drum w/no spacers or blades
SC.12.530
SC.12.540
SC.12.550
Diamond Blade 300mm or 12”
(blades sold individually)
3mm Spacer 64 Drum
(spacers sold individually)
1mm Spacer 1-2 Drum
(spacers sold individually)
SAS.320BELT Red Belt
SC.12.560
Scarifying Drum
SC.12.570
Scarifying Drum Shaft (6 per drum)
620.01.13
TCT Cutters (1 set = 128 cutters)
SC320 Scarifier / Shaver / Planner
SC.12.300
Required Circuit
3Ø
460 V
17.5 kw 25 Hp
Dimensions
45 x 26 x 116 in
(L x W x H)
114 x 66 x 295 cm
(L x W x H)
Weight without drum
569 lbs
258 kg
Weight with drum
779 lbs
353 kg
• Easy change polarity at machine
• Vibration dampened handle and electrical controls to ensure reduced operator fatigue
• Lockable front caster for ease of movement around job site
• Floating side debris guards and automatic belt tensioner
• Max cutting width 12” using 64 blades
• Self-propelled 1” cutting depth
Page 77
Horiba IG320 Gloss Meter
Provides instant readings for the gloss performance of your
polished floor. No calculations are required. Simply take
multiple readings and use the “Average” button to get your
overall gloss reading.
Horiba IG320 Gloss Meter
SAS.METER01
Measurement Area
12 x 6 mm oval
Measurement Range
0 mm - 100.0 mm
Display Range
0 mm - 199.9 mm
Continual Use Time
15 + hours
• A must have for most new construction and retail work - gloss measurements are required in most
technical data's
• Lightweight, compact body makes the unit easily transportable
• Provides real-time numerical displays of gloss levels using only the sample measurement
• Detects even the lowest levels of gloss
• No warm-up, one-touch test readings
• Measurement angle from 20 degrees to 60 degrees
Moh's Scratch Test
SAS.SCRATCH
• Use to determine concrete hardness
• Allows for proper tooling selection
• Kit includes 4 two-sided picks, a grinding stone & glass hardness plate with magnet for calibrating
SWISSMEX 2.4 Gallon Sprayer
SAS.ACE.SPRAY
Flow Rate
(Depends on tip size)
4.2 - 12.6
gal/hr
16 - 47.5
liters/hr
40 MAX PSI
• Sprayer comes with grey tip
• SASE also stocks a variety of sprayer tips
• Heavy duty construction grade
• Designed specifically for applying acetone based formulations, most alcohol & ammonia based products
Page 78
30" Heavy Duty Foam Rubber Squeegee
SAS.MOPPOLE
70" Telescope Pole
SAS.SQUEEGEE
30" Heavy duty foam rubber squeegee
• Effectively moves fine dust on concrete floors
• Use on troweled ground & smooth surfaces
• Move wet slurry for fast pick up
• Great for pushing water off of rain soaked slabs
• Cleans dust & dirt on finished floors
*Each item sold separately
ITEM NUMBER
DESCRIPTION
SAS.MOPPOLE
70" Telescope Pole
SAS.36MOP.FRAME
36" Mop Frame
SAS.36.MOPPAD
36" Microfiber Velcro Backed Pad
SAS.MOPFRAME
20" Mop Frame
SAS.20.MOPPAD
20" Microfiber Velcro Backed Pad
Page 79
Belts
ITEM
DESCRIPTION
FITS MACHINES
PDG.80286.00
Belt, Rubber Skirt
PDG 9500 +
PDG.83226.00
Belt, 3/3VP 450 GATES
PDG 8000P (propane)
PDG.80039.00
Belt, PK21 Bottom
PDG 8000
PDG.80040.00
Belt, PK6 Middle
PDG 8000
PDG.80041.00
Belt, PK10 Upper
PDG 8000
PDG.60056.00
Belt, PK12 Bottom
PDG 6000
PDG.60057.00
Belt, PK6 PTo Middle
PDG 6000
PDG.60058.00
Belt, PK8 Top Belt
PDG 6000
HG.10300
950 & 800 HDX Upper Belt
950 HDX 800
HG.10301
950 RX Lower Belt
950 HDX
HG.10302
800 HDX Upper Belt
800 HDX
HG.10304
800 Classic Upper Belt
800 Classic
HG.10305
800 Classic Lower Belt
800 Classic
HG.10306
800 HD&E Upper Belt
800 HD&E
HG.10307
800 HD Lower Belt
800 HD
HG.10308
800 E Lower Belt
800 E
HG.10309
800 Old Upper Belt
800
HG.10310
800 Old Lower Belt
800
HG.10313
650 Upper Belt
650
HG.10314
650 Lower Belt
650
HG.10315
500 Upper New Hub
500
HG.10321
130 V Belt
130
HOL.U11928
535 Lower belt
Diamatic 535
HOL.U11904
Belt, Middle
Diamatic 535, 580, 720
HOL.U11924
Belt, Upper
Diamatic 535, 580, 720 and 780 Pro
HOL.U11952
Belt, Middle
Diamatic 780 Ultra
HOL.800403
Belt, Lower
Diamatic 780 Ultra, 780 Pro
HOL.U11905
Belt, Lower
Diamatic 720, 580
HOL.U11980
Belt, Middle
Diamatic 780 Pro
*Belts are special ordered items
Page 80
SKF Bearings
ITEM
DESCRIPTION
NUMBER
REQUIRED
FITS MACHINES
HG.10200
6312 2RS-C3 800 HD
6
800 HD
HG.10201
6314 2RS-C3 800 HD
1
800 HD
HG.10202
6207 2RS-C3 800/650/950
5
800 HD, 650, 950
*HG.10203
6205 2RS-C3 500 old style
8
500
*HG.10204
6010 2RS-C3 500/800 old style
3
500, 800 HD
*HG.10205
6005 2RS-C3 500 hub style
3 (Hub Style) or
4 (Old Style)
500
HG.10206
6012 2RS-CS 500 main, both style
1
500
*HG.10207
6017 2RS-C3 800 CLASSIC HDX
2
800 Classic
HG.10208
6004 2RS-C3 130
2
*special order item
Seals
ITEM
DESCRIPTION
NUMBER
REQUIRED
FITS MACHINES
HG.10209
VA-25 800 HD
3
800 HD
HG.10210
20 By 35 By 7 TC 800 HD
3
800 HD
HG.10211
60 By 75 By 8 TC 800 HD
3
800 HD
HG.10212
20 By 47 By 7 TC 800 HD
3
800 HD
ITEM
DESCRIPTION
NUMBER
REQUIRED
FITS MACHINES
HG.10400
800 HD & E Spring Set Kit 3 Hole
3
800 HD, 800 E
HG.10401
800 Classic Spring Set Kit 1 Hole
4
950 RX, 800 HDX
HG.10409
800 Ultra Thick Spring Set Kit 3 Hole
3
800 HD, 800 E
HG.10410
800 Ultra Thick Spring Set Kit 1-Hole
3
800 CLASSIC
ITEM
DESCRIPTION
NUMBER
REQUIRED
FITS MACHINES
HG. 10501
800 HD Shaft Journal
3
800 HD
Spring Sets
Shaft Journals
Page 81
Dust Skirts
ITEM
DESCRIPTION
FITS MACHINES
PDG.90080.07
Dust Skirt, Bush Hammer Rubber
PDG 8000
PDG.80067.00
Dust Skirt, Rubber
PDG 8000
PDG.60062.00
Dust Skirt, Rubber
PDG 6000
PDG.50082.00
Dust Skirt, Rubber
PDG 5000
HOL.U118941
Dust Skirt, Rubber
Diamatic 780
HOL.780125
Dust Skirt, Brush
Diamatic 780
HOL.U11925
Dust Skirt, Rubber
Diamatic 535
HG.10405
Dust Skirt For 800 Grinder
800,G320
HG.10406
Dust Skirt For 500 Grinder
500,G240
HG.10407
Dust Skirt For 650
650
HG.10408
Dust Skirt For 950
950
Power Cords
ITEM
DESCRIPTION
AIW.6X4CORD
8/4 Cord for 230 V 3-Phase Grinders and Dust Extractors
AIW.8X4CORD
6/4 Cord for 460 V 3-Phase Grinders and Dust Extractors
AIW.4X4CORD
4/4 Cord for distances >200’ connections from the Grinder to the Dust Extractor
Plugs/Cord Ends
ITEM
DESCRIPTION
SAS.HBL2621
Plug, Male 230 V Single Phase
SAS.HBL2623
Plug, Female 230 V Single Phase
SAS.CS8365C
Plug, Male 230 V Three Phase
SAS.CS8364C
Plug, Female 230 V Three Phase
SAS.CS8165C
Plug, Male 460 V Three Phase
SAS.CS8164C
Plug, Female 460 V Three Phase
Vacuum Filters
ITEM
DESCRIPTION
FITS MACHINES
VBR.84671111
Pre-Filter, Bull 50
Bull 50
VBR.84671098
Pre-Filter, Bull 250
Bull 250
NWA.00093
Inline Filter, Bull 300
Bull 300
NWA.00090
Sock Filter, Bull 300
Bull 300
NWA.80010
Bull 1250
VBR.84675006
HEPA Filter, Bull 50
Bull 50
VBR.84675007
Bull 250
NWA.80020
Bull 1250
NWA.800EBS
HEPA Filter, Bull 1250EBS
Bull 1250EBS
SAS.90048
Bull 240
SAS.90052
Bull 240
SAS.45BAND
Rubber Band, Bull 45 Never Clog Bag
Bull 45
SAS.NCBAG
Bag Filter (cloth), Bull 45 Never Clog Bag
Bull 45
SAS.45HEPA
Filter, Cloth
Bull 45
SAS.45BAG
Bag, Paper Filter, Bull 45
Bull 45
Page 82
Misc Grinder Parts
ITEM
DESCRIPTION
FITS MACHINES
PDG.20104.25
Spin Lock Assembly
PDG 8000, PDG 6000
PDG.20106.00
Rubber Post 70 Duro (HARD)
PDG 8000, PDG 6000
PDG.20106.01
Rubber Post 60 Duro (SOFT)
PDG 8000, PDG 6000
NB.13.216
Screw, M8-1.25x16 Flat Head Socket Cap
PDG 8000, PDG 6000
HOL.009640
Bushing, Rubber Plate for Rigid System
Diamatic 780
HOL.900014
Morflex Coupler
Diamatic 780
HOL.00963802
Jack Hydraulic
Diamatic 780
TEL.ZB4BW823743
On/Off Switch
Diamatic 780
TEL.ZBE101
On/Off Contactor, Emergency Stop Contactor
Diamatic 780
TEL.ZBE102
On/Off Contactor, Emergency Stop Contactor
Diamatic 780
TEL.ZB4BD2
Switch, Forward/Reverse
Diamatic 780
TEL.ZB4BS54
Switch, Emergency Stop
Diamatic 780
HOL.800708
Plug, Male Blue 230 V
Diamatic 780
HOL.800732
Plug, Male Black 460 V
Diamatic 780
HOL.800709
Plug, Female Blue 230 V
Diamatic 780
HOL.800733
Plug, Female Black 460 V
Diamatic 780
HOL.78019015
Bushing, Hard
Diamatic 780
HOL.50019015
Bushing, Soft
Diamatic 535
TEL.ZB5AD5
Switch, On and Left/Right
Diamatic 535
TEL.ZENL1111
Switch, On Contactor
Diamatic 535
TEL.ZB5AS44
Switch, Emergency Stop
Diamatic 535
HOL.E6056
Time Delay
Diamatic 535
Edge Pro 180
ITEM
DESCRIPTION
DG.1313
Coupler, Flex Lovejoy
DG.1398
Bearing, Tapered Roller Timken 30303
DG.1399
Seal, Lip 50x30x8
DG.1420
Pulley, M8 20mm Wide, 38 Tooth
DG.1404
Sleeve
DG.1446
DISC
DG.1492
DISC with Volcanized Velcro - NEW
DG.1444
Motor Controller KBVF-26DGFCI
DG.1358
Controller Enclosure
Page 83
Floor Scraper Belts
ITEM
DESCRIPTION
FITS MACHINES
OEM.LE024
Belt, Set of 3, Lightning
SASE Lightning
OEM.HUE035
Belt, Set of 3, Hurricane
SASE Hurricane
OEM.LE044
Belt, Set of 2, Lightning
SASE Lightning
Misc Needle Scaler Parts
ITEM
DESCRIPTION
FITS MACHINES
SAS.SC.054
Plate, Needle Holder 3mm
SC28, SC28AVS
SAS.SC.017
Spring, Return 34B, NP34
SC28, SC28AVS
SAS.SC.027
Spring, Rear NP 34
SC28, SC28AVS
SAS.SC.034
Spring, Return 45B
SC49
SAS.SC.052
Seal, Piston NP 34/MH
SC28AVS
SAS.SC.010
Body, Pistol 34B SC28
SC28
SAS.SC.011
Tube, Round Front 34
SC28, SC28AVS
SAS.SC.013
Cover, Screwed
SC28
SAS.SC.014
Ring, Internal Retaining M 34 x 1.5
SC28
SAS.SC.015
Screw, Socket Head Cap 5/16-18 x 1.0
SC28, SC28AVS, SC49
SAS.SC.016
Anvil, 34 Series
SC28, SC28AVS
SAS.SC.021
Body, Complete Valve 23-45
SC28, SC28AVS, SC49
SAS.SC.022
Grip, Rubber Handle
SC28, SC28AVS, SC49
SAS.SC.051
Ring, Internal Retaining M37 x 1.5
SC49
SAS.SC.050
Cover, Screwed
SC49
SAS.SC.032
Tube, Round Front 45 Series
SC49
SAS.SC.033
Anvil, 45 Series
SC49
SAS.SC.035
Piston, 45B
SC49
SAS.SC.030
Body, Pistol 45B
SC49
ITEM
DESCRIPTION
FITS MACHINES
70-24-11-57
Belt CT 320
SC320
70-10-47-01-H
Rubber Sealing Rear
SC320
70-10-47-01-V
Rubber Sealing Front
SC320
70-25-02-50
Dust hose 50mm D Black
SC320
61-63-10-2RS
Bearing Right
SC320
61-20-63-07-2
Bearing Drive Side
SC320
90-24-16-10-42
Taperlock Motor
SC320
SC320 Parts
Page 84
Scarifier Shafts, Belts, Bearings, and other Parts
ITEM
DESCRIPTION
FITS MACHINES
SC.08.510
Flail Shaft, 12mm
SC8E, FR200
SC.10.510
Flail Shaft, 9/16” for 10” Ultra Drum
SC10E, VA25S
633.04.02
Flail Shaft, 12mm
VA25S
SC.12.500
Flail Shaft, 20mm for 4 Shaft Drum
SC12E, VA30S
SC.08.500
Drum w/o cutters
SC8E, FR200
SC.10.505
Drum w/o cutters
SC10E, VA25S
SC.12.505
Drum w/o cutters
SC12E, VA30S
SC.08.119
Belt, Toothed
SC8E, FR200, 640 Gas
SC.10.117
Belt, Toothed
SC10E, VA25S, 880 Gas
SC.12.117
Belt, Toothed
SC12E, VA30S, 1040 Gas
SC.08.604
Bearing, Endplate
SC8E, FR200, 6006-2RS
SC.10.604
Bearing, Endplate
SC10E, VA25S, SC12E, VA30S, 6210-2RS
SC.08.404
Bearing, Driveside
SC8E, FR200, 6303-2RS
SC.10.404
Bearing, Driveside
SC10E, VA25S, 6207-2RS
SC.12.404
Bearing, Driveside
SC12E, VA30S, 6307-2RS
SC.08.401
Shaft, Hexagonal
SC8E, FR200
NB.70.111
Key, Woodruff for Hexagonal Shaft
SC8E, FR200
SC.10.401
Shaft, Hexagonal
SC10E, VA25S
NB.70.115
SC10E, VA25S
SC.12.401
Shaft, Hexagonal
SC12E, VA30S
SC.12.407
SC12E, VA30S
SC.08.901
Wheel, Front
SC8E, FR200
SC.10.901
Wheel, Front
SC10E, VA25S, SC12E, VA30S
SC.08.803
Wheel, Rear
SC8E, FR200
SC.10.803
Wheel, Rear
SC10E, VA25S, SC12E, VA30S
SC.08.115
Pulley, Upper for gas models
SC8E, FR200
SC.10.156
SC10E, VA25S
SC.12.156
SC12E, VA30S
SC.08.203
Pulley, Lower
SC8E, FR200
SC.10.403
Pulley, Lower
SC10E, VA25S
SC.12.403
Pulley, Lower
SC12E, VA30S
SC.10.121
Pulley, Tightening
SC10E, VA25S
SC.12.121
Pulley, Tightening
SC12E, VA30S
SC.12.808
Plate, Joint
SC12E, VA30S
NB.20.112
Nut, Shaft
SC8E, FR200
NB.30.218
Washer, Safety
SC8E, FR200
SC.08.118
Guard, Belt
SC8E, FR200
SC.10.206
Guard, Belt
SC10E, VA25S
SC.12.118
Guard, Belt
SC12E, VA30S
Page 85
Need more grinding/scraping/cutting power?
Our Equipment Rental Services:
SASE offers rental services in Rockford (Knoxville) TN and Kent (Seattle) WA. We rent diamond grinders
for coatings removal and concrete polishing; floor scrapers for the removal of tile, VCT, and other hard
surface flooring products; scarifiers for trip hazard removal and stock removal of concrete; and dust
extraction systems. Contact one of our offices or your local sales representative for rates and availability
in your area.
PDG 8000 Package:
PDG 8000 Grinder, Bull 1250, Hose, Power
Cords, 3 QCS Plates and 3 Flex Plates
Daily Rate: $1,100
Weekly Rate: $3,300
PDG 5000 Package:
PDG5000 Grinder, Bull 300, Hose, Power
Cords, 3 QCS Plates and 3 Flex Plates
Daily Rate: $600
Machine
Daily Rate Weekly Rate
SC10E Electric or Gas
$300.00
$900.00
SC12E Electric or Gas
$300.00
$900.00
27” Propane Burnisher
$200.00
$600.00
Bull 1250 Dust Extractor $400.00
$1,200.00
Bull 300 Dust Extractor
$200.00
$600.00
Hurricane Floor Scraper
$700.00
$2,100.00
SC320 Shaver
$450.00
$2,200.00 (Plus $575 per
MM blade wear)
Machine Only Rentals
Page 86
Weekly Rate: $1,800
Page 87
Sales, Service, & Distribution
2475 Stock Creek Blvd. Rockford, TN 37853
Assembly & Manufacturing
26423 79th Ave.
S. Kent, WA 98032
www.SASECompany.com│800.522.2606
Page 88

Product Catalog - SASE Company Inc.

Transcription

Similar documents

Annonce S1

InterMail has a strong standing within digital and mail

OL396 Gunwharf Quay

Big data Web sites: 40 billion indexed web pages Youtube: 100 hrs

July 10, 2016 - Church of St. Joseph

July-August 2016 - Dallas Fort Worth Metro Golden Retriever Club

LOVE GOD, LOVE OTHERS, SERVE THE WORLD

Press Kit

Judge denies Bevin`s request to close Lexington

The Daily Bull