CCD Wheel Aligner

C
MANATEC
®
. . . In Technology state of mind
CCD Wheel Aligner
CCD-Infra Red wireless technology
for data acquisition.
RF Zigbee technology for data
communication to main console.
Measures all wheel alignment parameters with
excellent range and accuracy.
PULL
PUSH
90º
90º
PULL
PUSH
CENTER
Push - Pull Runout compensation
12” - 24” rim dia wheel bracket
Compact sensor arm
RF TECHNOLOGY
Manatec RF wheel aligners are known for it's measurement accuracy, user friendly software and its ability to perform quick wheel alignment
thereby generating higher returns to customer. Its affordability and easy serviceability due to optimized design makes these
aligners to be the most preferred.
R pac Premium (6x6) PPR
R pac Premium (6x6)
R pac Premium Plus (8x6) PPR
Fully loaded Premium Aligner with 8 CCD
cameras & 6 Inclinometers, TFT Monitor,
mobile cabinet with PC & printer and space
for accommodating tools.
Economy Aligner with 6 CCD cameras &
6 Inclinometers, TFT Monitor, mobile
cabinet with PC & printer. Available with or
without Push Pull Runout (PPR) feature.
For Aligning Buses, Trucks & Other Heavy Commercial Vehicles
R pac Premium Plus (8x6) H
Fully loaded Premium Aligner with 8 CCD
cameras & 6 Inclinometers, TFT Monitor,
mobile cabinet with PC & printer and space
for accommodating tools.
Buses
Supplied with special HCV software along
with Accessories suitable for Buses & Trucks.
Capable of aligning passenger cars also.
DATA COMMUNICATION TO MAIN
UNIT THROUGH RF @ 2.4 Ghz.
WITH 100 MT. RADIUS
Zigbee is a highly reliable RF transmission
technology, which ensures 100% data
transmission upto 100 mt. radius and is superior
to Bluetooth.
Trucks
Others
Multi Axle Configuration
WIRELESS TECHNOLOGY
DATA ACQUISITION THROUGH
CCD INFRA-RED TECHNOLOGY
PULL
PUSH
90º
90º
Quick Wheel Alignment
Program
5 minutes
savings
PULL
PUSH
3 minutes
savings
CENTER
Push - Pull Runout
Quick alignment program
Runout of all four wheels are measured and displayed simultaneously in a
single Push-Pull without jacking up the vehicle. Results in 5 minutes
saving of alignment time.
Unique quick alignment procedure to reduce alignment time by
skipping through some screens, saves 3 minutes.
151 mm
31 mm
182 mm
SAVE ALIGNMENT TIME - INCREASE REVENUE
significant
savings
Spoiler Program
Adjustment of Camber in Jacked up condition
Special software for adjusting the camber in jacked up condition.
Operator can easily access the adjustment points and tighten or
loosen the bolts. Significant savings in valuable alignment time.
Unique spoiler program to perform alignment on low body vehicles upto 3º
30’ (31mm) tilt. Sensor heads can further be lowered by 128mm using wheel
bracket sliding mechanism for 24” wheel rim, useful for low chassis vehicles.
Vehicle Data
Ride height condition
International vehicle data base with more than 20000 vehicle data including
American & European data. User can also add, modify & delete data.
Technical Specifications
Measurement parameters
Special input screen for feeding Ride height
specifications, which is critical for specific
vehicles like Mercedes Benz.
Pre-loading condition
Exclusive screen for entering data on
pre-alignment set up and pre-loading position,
for specific vehicles like BMW.
Camber (Front / Rear)
Range
Accuracy
± 10° 00'
± 00° 02'
Caster (Front)
± 20° 00'
± 00° 05'
Kingpin Inclination
± 20° 00'
± 00° 05'
Toe (Front / Rear)
± 05° 00'
± 00° 02'
Total Toe
± 10° 00'
± 00° 04'
Setback (Front)
± 05° 00'
± 00° 02'
Thrust angle
± 05° 00'
± 00° 02'
± 00° 02'
Runout (Front / Rear)
± 10° 00'
Included angle
± 30° 00'
± 00° 05'
Rear Setback #
± 05° 00'
± 00° 02'
Track width difference #
± 02° 00'
± 00° 04'
Lock angle (Optional)
± 60° 00'
± 00° 20'
± 00° 20'
Toe Out on Turns (Optional)
± 60° 00'
Power supply
230V AC, 50Hz.
Power
200W
Sensor arm Battery
6V, 7.2 AH
Operating temperature
0º - 50ºC
Battery backup time
> 12 hours
# Feature not available in (6x6) models.
High Resolution Graphics
Animated Graphics
3 Color Bar Code Correction
High Resolution graphics gives a crystal clear
clarity & viewability from a long distance.
User friendly step by step alignment instructions
are given by animated 3D graphics.
On-line correction mode helps the operator
to correct the alignment with easy 3 color bar
code identification.
WHEEL ALIGNMENT PRINTOUT
3D & 2D Pictorial Printout
helps users to understand &
compare alignment results.
Standard Accessories
Measuring Heads
l
2 Pairs
l
1 Pair
of Wheel bracket (12” - 24”)
of Rotary Plate - LCV (2 ton)
l
1 Steering
l
1 Brake
l
1 PC
Lock
Pedal Lock - LCV
with TFT Monitor, Keyboard & Mouse
l
1 Wheel
Alignment & Data Manager Software
l
4 Nos
of Rotary plate arresting spacer
(Not applicable for R pac Premium (6x6))
Optional Accessories
l
1 A4
Light & sleek measuring heads with remote control membrane
key pad eliminates frequent movement of operator between
vehicle and the machine. CMOS components used in the design
to reduce power consumption.
Color Inkjet / Laser Printer
l
1 Pair
of Multimedia Speaker
l
1 Pair
of Electronic Rotary Plate (2 Ton)
l
1 Pair
of Short Rear wheel slider
l
1 Pair
l
1 Set
of Long Rear wheel slider
of Sensor arm cable
MANATEC
REGD OFFICE
: C-22 & 23, Industrial Estate, Thattanchavady, Puducherry - 605 009. INDIA.
FACTORY
: Bahour Main Road, Karikalampakkam, Puducherry - 605 007, INDIA u
& 0413 - 2664000 (100 lines) u
Fax : 0413 - 2664099
Ph : 0413 - 2248926
u
Fax : 0413
- 2243222
ZONAL OFFICES : NEW DELHI : 011 - 32984429 / 42482405
KOLKATA
: 033 - 32969202
u
Email :
[email protected]
Email : [email protected]
Email : [email protected]
MUMBAI
: 022 - 32521673 / 24030458
Email : [email protected]
CHENNAI
: 044 - 32924066 / 42328032
Email : [email protected]
Rights of design & specification changes reserved.
u
www.manatec.net
BANGALORE
KOCHI
GUWAHATI
MADURAI
INDORE
:
:
:
:
:
080 - 32908414 / 22249864
093446 43133
094351 09351
0452 - 2341151
0731 - 2551243
Email : [email protected]
Email : [email protected]
Email : [email protected]
Email : [email protected]
Email : [email protected]
Version - 1.0 October 2011