Outdoor Lighting

lighting solutions for
SAFE AND VIBRANT OUTDOORS
streetlighting | floodlighting | landscape & architectural lighting
STREETLIGHTS
Modern lifestyle has impacted our schedules stretching them
way into midnight. This has increased the need for illuminating
outdoor spaces correctly and efficiently. Illuminating streets,
pathways, lanes and by-lanes, walkways has become the key
focus area for city planners in order to maintain safety as well as
vibrancy on the streets.
Wipro Lighting provides a vast range of lighting luminaires with
special features particularly designed to meet wide ranging
lighting needs. Precision optical design and uniform light
distribution to enhance safety on roads, advanced LED
technology for higher energy savings with contemporay styling
and design that blends with urban architecture.
SkylineLED
Compact and aesthetic LED streetlight
SPECIFICATIONS
•
Aluminium pressure die-cast powder coated housing
•
High efficiency, long life, LEDs
•
High purity PC fresnel diffuser with silicon gaskets for IP66 protection
•
Complete assembly with LED, driver and accessories pre-wired up to terminal block
INSTALLATION
•
Suitable for external pole dia. up to 35mm
CONTROL GEAR
•
In-built integrated electronic LED driver
DIMENSION DRAWINGS
91
325
122
60
403
10W & 20W
75
25W & 30W
All dimensions are in mm. Tolerance + 2 mm
APPLICATIONS
ELECTRICAL DATA
Cat. No.
SECONDARY
ROADS
MANUFACTURING RESIDENTIAL
PLANTS
AREAS
RESORTS
IP66
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Case Lot
(in nos)
LR02-171-XXX-57-XX
15
240
0.07
08
LR02-261-XXX-57-XX
20
240
0.09
08
LR02-291-XXX-57-XX
25
240
0.11
08
LR02-331-XXX-57-XX
30
240
0.13
08
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
SkylineLED
Energy efficient LED streetlight
SPECIFICATIONS
Aluminium pressure die-cast housing parts for long life
•
•
Pure polyester powder coated dark gray housing
•
High efficiency, long life LEDs
•
Toughened glass with silicon gaskets for IP66 protection
•
Complete assembly with LED, driver and accessories pre-wired up to terminal block
•
Driver cover designed to suit top maintenance
INSTALLATION
60W & 70W
•
Suitable for external pole dia. up to 60mm
•
3 Way 10 Amp connector provided for quick connections
CONTROL GEAR
In-built integrated electronic LED driver
•
DIMENSION DRAWINGS
486
365
M10.0 X 2nos
M10.0 X 2nos
237
191
90W, 110W & 120W
217
310
103
35W, 40W & 45W
155
60W & 70W
558
M10.0 X 3 nos
262
334.5
90W, 110W & 120W
All dimensions are in mm. Tolerance + 2 mm
APPLICATIONS
ELECTRICAL DATA
P
MAJOR ROADS
PATHWAYS
116
HIGHWAYS
CAR PARKING
Cat. No.
IP66
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Case Lot
(in nos)
LR02-391-XXX-57-XX
35
240
0.15
02
LR02-451-XXX-57-XX
40
240
0.18
02
LR02-501-XXX-57-XX
45
240
0.20
02
LR02-671-XXX-57-XX
60
240
0.26
01
LR02-781-XXX-57-XX
70
240
0.30
01
LR02-102-XXX-57-XX
90
240
0.39
01
LR02-122-XXX-57-XX
110
240
0.48
01
LR02-132-XXX-57-XX
120
240
0.53
01
150W/180W/210W options also available on request. Get in touch with Wipro team for further details.
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
IndiroadLED
High performance LED streetlight suitable for
secondary roads
SPECIFICATIONS
SECONDARY
ROADS
PATHWAYS
HIGHWAYS
CAR PARKING
•
Housing made up of die-cast aluminium with epoxy polyster powder coating
•
Flat toughened glass
•
Highly efficient, specially designed lens optics
•
High power high efficiency LEDs
•
Excellent heat dissipation through cooling fins on housing
•
Special textured dark shade of housing aids in better heat dissipation
•
IP65 protection with high quality silicon gaskets
•
Complete with LEDs, driver and accessories pre-wired up to terminal block in
connector compartment
•
Hinging with CG cover with housing provided for easy maintenance
•
Anti corrosive SS hardware facilitates maintenance
INSTALLATION
•
Luminaire is suitable for bracket diameter of 50 - 60mm
CONTROL GEAR
•
In-built electronic LED driver
DIMENSION DRAWINGS
55
P
195
APPLICATIONS
450
LR 17/16
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
Cat. No.
IP65
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
LR17-251-XXX-57-XX
25
240
0.11
1.3
01
LR16-411-XXX-57-XX
40
240
0.19
2.8
02
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
CygnusLED
High performance LED streetlight
SPECIFICATIONS
HIGHWAYS
CAR PARKING
High efficiency, long life, LEDs
•
High purity PMMA Lenses for superior performance
•
Toughened glass with EPDM gaskets for IP65 protection
•
External connector, 10A G.F.P. for ease of wiring
•
Complete assembly with LED, driver and accessories
pre-wired up to terminal block in control gear compartment
•
Integral covered control gear compartment with connector
INSTALLATION
•
Suitable for external pole dia. 40 to 50mm
CONTROL GEAR
•
In-built electronic LED driver
DIMENSION DRAWINGS
432
370
84.5
PATHWAYS
Aluminium die-cast powder coated housing and frame
•
515
454
261
MAJOR ROADS
•
84.5
P
206
APPLICATIONS
60W
90W, 120W & 150W
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
Cat. No.
IP65
Power
(A)
Rated
Voltage (V)
Approx.
Weight (Kg)
Case Lot
(in nos)
LR18-641-XXX-57-XX
60
240
3.5
02
LR18-971-XXX-57-XX
90
240
7.0
01
LR18-132-XXX-57-XX
120
240
7.0
01
LR18-172-XXX-57-XX
150
240
7.0
01
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
LED ADVANTAGES
key parameters’ check list
Country of origin and Make
Quality of LEDs (Binning)
Lumen output
Colour temperature consistency
Compliant to LM80 standard
System lumens of LED luminaire
best
LED
Compatibility with electrical
environment
Multistage isolated driver
Useful system life
Protection against voltage surges
Compliance with safety and
performance standards
driver
LED luminaire
what Wipro Offers
Best-in-class LED technology
from Japan
Conforms to relevant
international standards
High lumen output of minimum
130 lm/watt
Constant Current Constant
Voltage (CCCV) driver
LM80 compliant LEDs
2/3 stage isolated drivers
Strict adherence to lumen
output and colour temperature
Good design and quality
components for a long
service life
Designed and manufactured
in India specially for Indian
power conditions
Designed for varying
ambient temperatures
Uniform and
glare free lighting
Effective heat
dissipation mechanism
Good volumetric lighting
Maintaining junction
temperature within
specified limits
thermal
management
MCPCBs for high wattage
LED luminaires for better
heat dissipation
In all products, junction
temperature is maintained
well below the maximum
specified limit
Luminaires can operate in varied
ambient conditions (upto 45º C)
Optical efficiency
optics
HET (High Efficiency
Translucence) or LGP (Light
Guide Panel) technology in most
of the indoor luminaires
Uniform and glare free lighting
experience with reduced LPD
in indoor luminaires
Volumetric distribution for
good lighting and safety
Innovative design
Latest technology
Form and function
Trusted brand
design and
aesthetics
Innovative designs aligned
with latest technology
Over 20 years of experience
and expertise in lighting
design
THE SUNSHINE LIGHT
In India, we are blessed with abundant sunshine for almost the entire year.
The advantages of solar energy applications are now well understood and are
taking precedence in every step towards green initiatives. LED streetlights powered
by solar energy offer phenomenal energy savings and help in reducing operating
costs significantly.
Wipro Lighting brings you the advantage of solar energy combined with the energy
efficiency of LED streetlights. Available in various modules this range of streetlights
is ready to take energy conservation to a all new level.
KEY ADVANTAGES
LED STREETLIGHT
SOLAR PANEL
•
High efficiency LED luminaires contribute to enhance
performance of Solar LED Street-lighting system
•
High efficiency, best-in-class solar panel comprising of mono and
multi-crystalline solar cells resulting in enhanced power generation
•
Efficient thermal management & heat sink design
ensures long service life
•
Smart MPPT (Maximum Power Point Tracking) charge controller for
effective charging from solar panel
•
Smart MPPT controller also ensures automatic dusk to dawn operation
BATTERIES
POLES
•
Tubular deep discharge batteries for maximum life
•
Smart MPPT charge controller enhances the battery service life
•
GI tubular/octagonal poles with superior surface finish
and elegant in appearance
TECHNICAL SPECIFICATIONS
Light Wattage (W)
Solar Photo Voltaic Module (W)
GEL Battery (Amp Hr)
Pole Height (Mtr)
Charge Controller (Amp)
9
45
40
4
10
11
45
75
4
10
15
75
75
5
10
18
75
100
5
10
25
100
150
6
10
30
150
150
6
20
36
150
200
6
20
40
150
200
6
20
45
225
150 x 2
6
20
60
250
150 x 2
7
20
90
450
200 x 2
8
20
•
Recommended hours of charging at full sun shine (1kW/m2 irradiance) for daily usage of 12 hours.: 5 hours/day
•
Maximum autonomy days, assuming 12 hours of usage per day (days): 2 Days
•
Maximum continuous back up (hours): 24 Hours
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology. Data given is representative and can change.
Vola
Elegant streetlight luminaire with multi-faceted,
high-performance reflector
SPECIFICATIONS
PATHWAYS
HIGHWAYS
Textured gray pure polyester pressure die-cast aluminium compact and aesthetic housing
•
Specially designed high purity pre-anodized aluminium multi-faceted
high-performance reflector
•
IP66 housing [lamp and control gear compartment] with formed toughened glass totally
sealed using silicon gasket ensuring IP and life long performance
•
Top maintainable product with hingeable top cover giving access to control gear and lamp
•
Anti corrosive stainless steel hardware to facilitate easy lamp replacement
•
External pole mounting arrangement
•
Conforms to IS 10322 Part 5/Sec 1:1987
INSTALLATION
Suitable for pole dia 45mm - 60mm max
•
ACCESSORIES
•
Heavy-duty copper wound ballast
•
PF capacitor and electronic igniter pre-wired up to terminal block
•
4 way 10 Amps GFP mains connector
•
Lamp holder base E40 porcelain body with silver contacts
DIMENSION DRAWINGS
165
MAJOR ROADS
•
278
APPLICATIONS
757
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
Cat. No.
Lamp
WST 51150
WST 51250
WSH 51250
IP66
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
1 x 150 W HPSV (T)
240
0.8
7.3
01
1 x 250 W HPSV (T)
240
1.3
8.5
01
1 x 250 W MHL (T)
240
1.3
8.5
01
Uno
IP66 die-cast aluminium with top maintainable streetlight
with curved toughened glass & pot optics reflector
SPECIFICATIONS
APPLICATIONS
HIGHWAYS
CAR PARKING
Top maintainable single toggle opening arrangement for easy maintenance
•
Optical system formed by high purity aluminium reflector for optimum beam
distribution and high efficiency
•
Anti corrosive, stainless steel quick release toggle facilitates easy opening of top cover
and gives instant access to lamp compartment
•
Variable optics arrangement to control distribution of light on street and kerb side of road
•
Special air breathing filter is provided for better heat ventilation to facilitate longer lamp life
•
Conforms to standards: IS 10322/Part 5/Sec 1:1987
INSTALLATION
•
Suitable for horizontal mounting on pole with diameter of 52mm
DIMENSION DRAWINGS
195
PATHWAYS
•
6 50
300
MAJOR ROADS
High pressure aluminium die-cast housing
Ø50
P
•
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
IP66
Cat. No.
Lamp
WSH 71150/WST 71150
1 x 150 W MHL (T) / HPSV (T)
240
0.8
4.116
02
WSH 71250/WST 71250
1 x 250 W MHL (T) / HPSV (T)
240
1.3
4.116
02
*Approximate weight is without ballast
Rated
Voltage (V)
Mains
*Approx.
Current (A) Weight (Kg)
Case Lot
(in nos)
Lumino
IP65 die-cast aluminium streetlight luminaire; suitable for
HPSV & MHL lamps
SPECIFICATIONS
•
Single piece die-cast aluminium housing in gray colour
•
Anodised aluminium pot optics reflector
•
Heat resistant toughened glass and EPDM gasket
•
Heavy duty copper wound ballast
•
PF capacitor and electronic ignitor pre-wired upto terminal block
•
Stainless steel toggles ensure IP protection
INSTALLATION
Luminaire is suitable for installation on bracket with dia of 60mm pole
•
APPLICATIONS
147
DIMENSION DRAWINGS
PATHWAYS
HIGHWAYS
PRIMARY ROADS
280
MAJOR ROADS
595
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
IP65
Cat. No.
Lamp
WST/H 45150
1 x 150 W HPSV (T) / MHL (T)
WST/H 45250
1 x 250 W HPSV (T) / MHL (T)
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
240
0.8
4.95
01
240
1.2-1.4
4.95
01
Express
WST/WSH 24
WST/WSH 25
DIMENSION DRAWINGS
DIMENSION DRAWINGS
180
145
IP65 pot optics deep drawn aluminium streetlight luminaire; suitable for
HPSV, HPMV & MHL lamps
325
600
260
All dimensions are in mm. Tolerance + 2 mm
475
All dimensions are in mm. Tolerance + 2 mm
SPECIFICATIONS
INSTALLATION
•
Suitable for side bracket mounting on pole with
outer dia. 40-50mm (Express WSM/S 24 series)
•
Suitable for side bracket mounting on pole with outer dia.
45-55mm (Express WST/H 25 series)
•
Single piece deep drawn aluminium housing with built in
electrochemically brightened, anodised high purity
aluminium pot optics reflector
•
Die-cast aluminium pole mounting system with option of
side and bottom entry
•
Silverized finish from outside & hinged toughened
glass shield
ACCESSORIES
•
Anti corrosive SS toggles & EPDM gasket
•
Lamp holders ES (E40) porcelain E27 (WST 24)
•
Complete with heavy duty copper wound ballast,
PF capacitor
•
10 Amps G.F.P mains connector for 2.5 sq. mm
and PF improvement capacitor
•
Heat and abrasion resistant XLPE wires
•
Internal earthing terminal for 14 SW G earthing wire
•
Conforms to standards: IS 10322/Part 5/Sec 1:1987
•
Three wire electronic ignitor, super imposed pulse
type ignitor offered on request
IP65
ELECTRICAL DATA
Cat. No.
Lamp
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
WSM 24080
WSM 24125
1 x 80 W HPMV (BC Lampholder)
240
1 x 125 W HPMV (BC Lampholder)
240
0.43
4.10
01
0.66
2.240 (without ballast)
WSS 24070
1 x 70 W HPSV (E) with internal starter
01
240
0.4
2.240 (without ballast)
WSS 24071
01
1 x 70 W HPSV (E) without internal starter
240
0.4
2.240 (without ballast)
01
WST 24071
1 x 70 W HPSV (T) Lamp base E27
240
0.4
2.240 (without ballast)
01
WSH 24070
1 x 70 W MHL (E)
240
0.80
3.725 (without ballast)
01
WST/H 25150
1 x 150 W HPSV (T) / MHL (T)
240
1.30
3.725 (without ballast)
01
WST/H 25250
1 x 250 W HPSV (T) / MHL (T)
240
1.30
3.725 (without ballast)
01
Lumino series
IP66 die-cast aluminium with top maintainable streetlight
with curved toughened glass & pot optics reflector
WSF 14
WSF 14
WSP 13
Sleek and efficient IP65 FTL (T5)
streetlight
Sleek and efficient IP65 FTL (T5)
streetlight
IP65 Compact Fluorescent (CFL)
streetlight
DIMENSION DRAWINGS
DIMENSION DRAWINGS
DIMENSION DRAWINGS
35
WSP 13236
145
98
110
285
50
144
162
565
770
35
685
WSF 14214/24
WSF 14414/24
640
285
All dimensions are in mm. Tolerance + 2 mm
50
All dimensions are in mm. Tolerance + 2 mm
145
APPLICATIONS
P
MAJOR ROADS
PATHWAYS
HIGHWAYS
RESIDENTIAL
AREAS
CAR PARKING
WSP 13336
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
IP65
Cat. No.
Lamp
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
WSF 14214 SG
WSF 14224 SG
2 x 14 W FTL (T5)
240
0.13 – 0.15
1.5
04
2 x 24 W FTL (T5)
240
0.2 – 0.22
1.5
04
WSF 14414 SG
4 x 14 W FTL (T5)
240
0.26 – 0.28
3
04
WSF 14424 SG
4 x 24 W FTL (T5)
240
0.4 – 0.43
3
04
WSP 13236 SG
2 x 36 W CFL (TC-L)
240
0.3 – 0.32
1.4
04
WSP 13336 SG
3 x 36 W CFL (TC-L)
240
0.47 – 0.5
3
01
SPECIFICATIONS
WSF 14
•
•
•
•
Deep drawn aluminium housing in grey colour
Clear acrylic diffuser with EPDM high temperature withstanding capacity gasket
Pre-anodised high purity aluminium reflector
Stainless steel toggles ensure IP protection (WSF 14/13)
WSP 13
•
•
Deep drawn aluminium housing in grey colour
Clear acrylic diffuser with long life EPDM gasket
WSP 16
WSP 16
•
Secondary road CFL streetlight
•
•
•
DIMENSION DRAWINGS
INSTALLATION
•
560
•
•
115
Single piece deep drawn aluminum housing with powder coated grey housing and white
gear tray with clear ribbed acrylic cover
Aluminum black powder coated extrusion pole mounting system for side entry
Anti corrosive SS toggles & EPDM gasket
Confirms to IS 10322 Part 5/Sec 1:1987
•
Luminaire is suitable for installation on bracket with dia of 25/30mm (WSF 14)
Luminaire is suitable for installation on bracket with dia of 35/50mm (WSP 13336 SG)
Luminaire is suitable for installation on bracket with dia of 25/30mm (WSP 13236 SG)
Provision for mounting through pole with – pipe outer dia < 35mm (WSP 16)
112
ACCESSORIES (WSP 16)
•
35 Poles entry
All dimensions are in mm. Tolerance + 2 mm
•
•
•
•
•
Slim open type copper wound or electronic ballast
Sleek screw fit 4 pin CFL lamp holder
Aluminum canister type starter
3 way 5 amps G.P.F main connector for 1sq. mm incoming cable
Push fit plastic lamp supporter
All accessories are pre-wired upto terminal block
CONTROL GEAR (WSP 16)
•
Digital Ballast (suffix SG after Cat.no.)
IP65
ELECTRICAL DATA
Cat. No.
Lamp
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
WSP 16136 NS
WSP 16136 SG
1 x 36 W CFL (TC-L)
240
0.37
1.265
06
1 x 36 W CFL (TC-L)
240
0.41
0.865
06
FLOODLIGHTS
Beautifully lit cities, facades and buildings attract shoppers,
sellers and tourists. Urban planners find it necessary to
accentuate the outdoors to maintain the right level of illumination
that facilitates orientation in dark and meet the basic
requirements of the residents and tourists.
We provide a wide range of floodlights that are functional,
reliable, durable and highly energy efficient that save operating
costs. Options of wide and narrow beam distribution gives a
distinctive atmosphere by amazingly illuminating the architectural
structures and landmarks.
CygnusLED
High performance and rugged LED floodlight
SPECIFICATIONS
P
PORTS
INDUSTRIAL FACADE
OUTDOORS
MONUMENT CONSTRUCTION
LIGHTING
SITE
CAR PARKING
•
Aluminium die-cast powder coated housing and frame
•
High efficiency, long life LEDs
•
High purity PMMA Lenses for superior performance
•
Toughened glass with EPDM gaskets for IP65 protection
•
Loop in loop out connector, 10A G.F.P. for ease of wiring
•
Complete assembly with LED, driver and accessories pre-wired
up to terminal block in control gear compartment
•
Integral covered control gear compartment with connector
INSTALLATION
•
External cradle adjustable mounting arrangement suitable for mounting with
2 nos. M10 bolts.
CONTROL GEAR
•
In-built integrated electronic LED driver
DIMENSION DRAWINGS
75 75
Ø12
3 Nos
Connector box
261
454
APPLICATIONS
118
320
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
Cat. No.
IP65
Power
(W)
Rated
Voltage (V)
Approx.
Weight (Kg)
Case Lot
(in nos)
LR18-641-XXX-57-XX
60
240
3.5
02
LR18-971-XXX-57-XX
90
240
7.0
01
LF08-132-120-57-XX
120
240
7.0
1
LF08-172-120-57-XX
150
240
7.0
1
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
RevoLED
High efficiency LED floodlight
SPECIFICATIONS
INDUSTRIAL FACADE
OUTDOORS
MONUMENT CONSTRUCTION
LIGHTING
SITE
CAR PARKING
High efficiency, long life, Chip On Board (COB) LEDs
•
Pressure die-cast aluminium housing with fins for efficient heat dissipation (150W)
•
Exruded aluminium housing with fins for efficient heat dissipation (180W)
•
Highly efficient, specially designed glass lens optics
•
Constant current LED driver, operating voltage range from 90VAC ~ 305 VAC
•
Operating power factor > 0.95
•
Complete assembly with LED, driver and accessories pre-wired in driver compartment
INSTALLATION
•
Mounting with 2 nos., of bolts on cradle
CONTROL GEAR
•
In-built integrated electronic LED driver
DIMENSION DRAWINGS
135
235
Driver Box
200
PORTS
•
200
P
370
APPLICATIONS
313
370
101
150W
180W
All dimensions are in mm Tolerance ± 2mm
ELECTRICAL DATA
Cat. No.*
IP65
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
LF07-152-060-65-XX
150
240
0.7
6.2
01
LF07-152-090-65-XX
150
240
0.7
6.2
01
LF07-202-060-65-XX
180
240
0.8
8.2
01
LF07-202-090-65-XX
180
240
0.8
8.2
01
*60 and 90 indicates beam angle in degrees.
210W & 415W options also available on request. Get in touch with Wipro team for further details.
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
Vivo
IP65 integral floodlight with symmetric wide beam distribution
suitable for HPSV and MHL lamps
APPLICATIONS
SPECIFICATIONS
P
PORTS
FACADE
MONUMENT CONSTRUCTION
LIGHTING
SITE
•
Die-cast aluminium stove enameled housing with adjustable mounting cradle
•
High purity anodized aluminium reflector with bright hammered finish for wide beam
light distribution
•
Anti corrosive stainless steel toggles
•
Heat resistant hingeable toughened glass and EPDM gasket assembly
•
IP65 - dust, water and insect proof
•
Heavy duty copper wound ballast and all accessories pre-wired upto terminal block
•
Conforms to IS 10322/Part 5/ Sec 1:1987
CAR PARKING
ACCESSORIES
•
Lamp holder E40 base porcelain
•
10 Amps GFP mains connector for 2.5 sq. mm cable
•
PF improvement capacitor
•
Standard engineering plastic cable gland
•
Three wire electronic ignitor
DIMENSION DRAWINGS
418
142
Ø11
430
505
24
11
118
MOUNTING DETAILS
All dimensions are in mm Tolerance ± 2mm
ELECTRICAL DATA
Cat. No.
Lamp
WFT 53250
WFH 53250
IP65
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
1 x 250 W HPSV (T)
240
1.3
7.2
01
1 x 250 W MHL (T)
240
1.3
7.2
01
WFT 53400
1 x 400 W HPSV (T)
240
2.1
8.3
01
WFH 53400
1 x 400 W MHL(T)
240
2.1
8.3
01
WFZ 42
IP65 non-integral symmetric floodlight with wide beam reflector
suitable for HPSV and MHL lamps
SPECIFICATIONS
P
PORTS
FACADE
MONUMENT CONSTRUCTION
LIGHTING
SITE
CAR PARKING
•
Die-cast aluminium painted black housing with mounting cradle along with protractor
•
High purity anodized aluminium reflector with bright hammered finish
•
Toughened glass permanently fixed to housing using silicon sealant
•
Narrow beam distribution can be offered on request
•
Conforms to IS 10322/Part 5/Sec 1:1987
INSTALLATION
•
Mounting with 3 Nos. M-12 bolt on mounting cradle
Note: Distance of control gear box from Iuminaire should be less than 30 mtrs. for
proper re-ignition
ACCESSORIES
OPTIONAL FEATURES
•
Lamp holder base GES (E 40)
•
Epoxy painting
•
2 way 10 Amps GFP mains connector for
2.5 sq. mm incoming cable
•
External earthing terminal
•
Earthing terminal for 14 SWG earthing wire
•
Suitable for 19 mm ET cable entry
•
Lamp holder is pre-wired upto terminal block
•
Silicon insulation internal wiring
DIMENSION DRAWINGS
Ø15
300
APPLICATIONS
CTC 77.5 CTC 77.5
3 nos.
77.5
145
137
410
All dimensions are in mm Tolerance ± 2mm
IP65
ELECTRICAL DATA
Cat. No.
Lamp
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)*
Case Lot
(in nos)
WFZ 42250
WFZ 42400
1 x 250 W HPSV (T) / MHL (T)
240
1.3
3.280
01
1 x 400 W HPSV (T) / MHL (T)
240
2.1
3.280
01
*Approx. weight is without ballast
WFZ 32
IP65 non-integral heavy duty floodlight with symmetric
circular narrow beam reflector suitable
for 1 x 250/400 W HPSV (E/T) / MHL (T) lamps
SPECIFICATIONS
APPLICATIONS
•
P
•
PORTS
FACADE
MONUMENT CONSTRUCTION
LIGHTING
SITE
CAR PARKING
•
•
•
DIMENSION DRAWINGS
WGS/H 56
•
Ø534
570
•
•
C/C101
Ø9.5(2Nos)
Ø12.5
Mounting holes details of cradle
Die-cast aluminium stove enamel painted lamp holder housing with cooling fins,
spun high purity anodised aluminium parabolic reflector
Heat resistant toughened glass and EPDM gasket
Anti corrosive stainless steel toggles for lamp replacement
Mounting cradle along with protractor
Conforms to IS 10322 Part 5/Sec 1:1987
•
•
•
Compact and sturdy die-cast aluminium housing fitted with heavy duty copper wound
ballast, PF capacitor and mains and lamp connectors
2 nos. S.S. toggles are provided for easy maintenance and error free closing of cover
All external changes fasteners of S.S./brass
Suitable for 3/4” cable gland plugged with EPDM rubber plugs
Heat and HV resistant XLPE internal wiring
Conforms to IS 10322 Part 5/Sec 1 1: 1987
All dimensions are in mm. Tolerance + 2 mm
WGS/H 56 | Control gear box
INSTALLATION (WFZ 32)
•
Mounting with 3 nos. of M8 bolt on mounting cradle
ACCESSORIES (WFZ 32)
•
•
•
•
•
•
DIMENSION DRAWINGS
SLOT TO SUIT
M6 OR 1/4”
BOLT, 2 NOS.
(WGS/H 56)
•
335
•
312 c/c
110
175
All dimensions are in mm. Tolerance + 2 mm
Lamp holder base GES (E 40), porcelain
2 way 10 amps G.F.P. mains connector for 1.5 sq.mm incoming cable
XLPE internal wiring with class ‘H’ insulation
Earthing terminal for 14 SWG earthing wire
Polyamide cable gland suitable for 9/11 mm cables
Lamp holder is pre-wired upto terminal block
•
•
•
•
OPTIONAL FEATURES
Heavy duty copper wound ballast (to be ordered
separately)
4 way 10 Amps. G.F.P. mains connector for
2.5 sq.mm.incoming cable, loop-in loop-out wiring.
2 way 10 Amps. G.F.P. lamp connector
Earthing terminal for 14 SWG earthing wire
P.F. improvement capacitor
Impulser type electronic ignitor (for HPSV/MHL
lamps only)
All accessories are pre-wired upto terminal block
•
Re-wireable/HRC type fuse
•
Superimposed pulse type ignitor
ELECTRICAL DATA
Cat. No.
Lamp
WFZ 32250
WFZ 32400
IP65
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
1 x 250 W HPSV / MHL (E/T)
240
1.3
4.5
01
1 x 400 W HPSV / MHL (E/T)
240
2.1
4.5
01
WGS 56250
1 x 250 W HPSV
240
1.30
1.5 (w/o ballast)
04
WGS 56400
1 x 400 W HPSV
240
2.10
1.5 (w/o ballast)
04
WGH 56250
1 x 250 W MHL
240
1.30
1.5 (w/o ballast)
04
WGH 56400
1 x 400 W MHL
240
2.10
1.5 (w/o ballast)
04
WFZ 68
IP65 non-integral symmetric wide beam floodlight
suitable for 2 x 250/400 W HPSV (T) & MHL (T) lamps
SPECIFICATIONS
APPLICATIONS
•
P
PORTS
FACADE
MONUMENT CONSTRUCTION
LIGHTING
SITE
CAR PARKING
•
•
•
•
•
DIMENSION DRAWINGS
Specially designed die-cast aluminium housing in grey colour
Pre-anodised super high purity aluminium reflector
Heat resistant toughened glass and EPDM gasket
Stainless steel toggles ensure IP protection
Mounting cradle with protractor
External double compression cable gland
WGS/H 59
•
Ø15
CTC 82.5 CTC 82.5
350
170
•
165
725
•
•
•
Die-cast aluminium housing in grey colour suitable for 2 nos. of 250W/400 W
HSPV (T)/MHL(T) lamps
2 nos. of heavy duty copper wound ballasts (to be ordered separately)
PF capacitors and ignitors pre-wired up to terminal block
Heat resistant EPDM gasket ensures IP protection
External double compression cable glands
All dimensions are in mm. Tolerance + 2 mm
WGS/H 59 | Control gear box
INSTALLATION
•
•
Mounting with 2 nos., M10 bolts on cradle (WFZ 68)
Mounting with 4 nos., M8 bolts on cradle (WGS/H 59)
DIMENSION DRAWINGS
106
Ø4
276
Ø10
Top view
276
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
Cat. No.
Lamp
WFZ 68250
2 x 250 W HPSV (T) / MHL (T)
WFZ 68400
2 x 400 W HPSV (T)/ MHL (T)
WGS 59250
IP65
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
240
2.6-2.8
8.5
01
240
3.98-4.1
8.5
01
2 x 250 W HPSV (T)
240
2.5 – 2.6
3.5
04
WGH 59250
2 x 250 W MHL (T)
240
2.5 – 2.6
3.5
04
WGS 59400
2 x 400 W HPSV (T)
240
4.1 – 4.2
4.0
04
WGH 59400
2 x 400 W MHL (T)
240
4.1 – 4.2
4.0
04
Poles
Poles are the backbone of efficient street
lighting applications and urban city
beautification projects. Wipro Lighting offers
a wide range of products right from 5m-12m
poles with different bracket options.
Town planners and urban developers today
require poles which blend with modern city
landscapes and provide a distinguished
look to the area.
SWAGED POLES / TUBULAR POLES
Swaged poles are the most popular streetlighting poles, even today. We offer the
entire range of these poles with specifications confirming to IS2712: Part II.
DECORATIVE POLES
This category of poles is the favourite of all designers. We offer a wide variety of
customized options to suit your design creations. Please contact our lighting
experts to explore more on this range.
OCTAGONAL POLES / CONICAL POLES
Modern octagonal poles are sleek, elegant and aesthetic. They provide a low
maintenance, long life solutions for streetlighting applications.
POLES GENERAL SPECIFICATIONS
Poles
(in Mtr.)
Top Dia
(in mm)
Bottom Dia
(in mm)
Thickness
(in mm)
Base Plate
(in mm)
Single Arm Bracket
(in mm)
Double Arm Bracket
(in mm)
3
70
130
3
200x200x12
1000
NA
3
70
130
3
200x200x12
NA
1000
4
70
130
3
200x200x12
1000
NA
4
70
130
3
200x200x12
NA
1000
5
70
130
3
200x200x12
1000
NA
5
70
130
3
200x200x12
NA
1000
6
70
130
3
200x200x12
1000
NA
6
70
130
3
200x200x12
NA
1000
7
70
135
3
225x225x16
1000
NA
7
70
135
3
225x225x16
NA
1000
8
70
135
3
225x225x16
1000
NA
8
70
135
3
225x225x16
NA
1000
9
70
155
3
260x260x16
1000
NA
9
70
155
3
260x260x16
NA
1000
9
70
175
3
275x275x16
1000
NA
9
70
175
3
275x275x16
NA
1000
10
70
175
3
275x275x16
1000
NA
10
70
175
3
275x275x16
NA
1000
10
70
200
3
290x290x16
1000
NA
10
70
200
3
290x290x16
NA
1000
11
70
210
3
320x320x20
1000
NA
11
70
210
3
320x320x20
NA
1000
12
70
230
3
325x325x20
1000
NA
12
70
230
3
325x325x20
NA
1000
High Mast Lighting
High Mast lighting is currently the most efficient and
cost effective way of illuminating large outdoor areas
such as highways, railway yards, dock yards, parking
lots, shopping centers, power plants, coal mines,
warehouses, toll plazas and road junctions.
High Masts can be mounted at considerable heights,
thus rendering uniform illumination to the entire area.
It also enables easier installation and maintenance of
luminaires due to motorized controls that lowers and
raises the luminaires. The sleek high masts lighting is
also aesthetically superior to the conventional lattice
structures or lower height poles.
Wipro Lighting offers comprehensive range of solutions
in High Masts. The range is available in standard
heights,12/16/20/25/30 metres. All these options
support various luminaire combinations depending on
lighting design requirements.
HIGH MAST ASSEMBLY
The assembly is housed in a chassis and is secured axially. The pulley is made of non corrosive
material and runs on self-lubricating bearings with stainless steel spindles. This complete
assembly is hot dip galvanized.
WINCHES
The double drum winch driven by a single speed reversible power tool is a self sustaining
mechanism which does not get affected by weather or moisture. It is designed as a self
lubricating winch by using oil bath.
LANTERN CARRIAGES
The lantern carriage is made of durable steel tube and serves the dual purpose of carrying
luminaires as well as acts as an electrical conduit. It is provided with rubber gaskets
internally which allows easy movement and avoids scratches on the Mast surface
during movement.
ACCESSORIES
Flexible marine grade stainless steel wire ropes (AISI SS316) are used in 7/19 construction in
the Mast assembly. Accessories like trailing cable, cable connections, lightning arrester,
power tool, feeder pillar box and aviation obstruction luminaire are provided with the Mast.
HIGH MAST GENERAL SPECIFICATIONS
High Mast Height
(in Mtr.)
Top Dia
(in mm)
Bottom Dia
(in mm)
Thickness
(in mm)
Base Plate
(in mm)
12
150
310
3
445 x 25
12
150
360
3
520 x 25
12.5
150
310
3
445 x 25
12.5
150
360
3
520 x 25
16
150
360
4, 3
520 x 25
16
150
460
4, 3
670 x 25
20
150
410
4, 3
570 x 25
20
150
460
4, 3
670 x 25
25
150
460
5, 4, 3
670 x 30
25
150
510
5, 4, 3
730 x 32
25
150
540
5, 4, 3
730 x 32
30
150
540
5, 4, 3
730 x 32
30
150
610
6, 4, 4
840 x 32
30
150
610
6, 5, 4
840 x 32
LANDSCAPE AND
ARCHITECTURAL
LIGHTING
Lighting for outdoors is a mean for enhancing an architectural
design well beyond its walls and sculptures by creating interesting
patterns of light. Good lighting for landscape is all about
beautifully lit up pathways, shimmering wall lights
& gorgeous bushlighting that exhilarates the environment.
Our range of luminaires has helped landscape designers /
architects to create magical and stunning effects, in the outdoors.
LED Bollard
LED Bollard light suitable for landscape lighting
SPECIFICATIONS
APPLICATIONS
PATHWAYS
ENTRANCE AREAS
TOWNSHIPS
GARDENS
•
MS housing 2mm wall thickness & black matt powder coated
•
Special translucent PMMA milky tube for better light transmission
•
High luminous flux imported LEDs for better light output
•
Product is designed for IP65 protection
•
Electronic control gear duly wired up to the terminal block
•
Designed and manufactured to comply with IS 10322 part 5/Sec 1 1987
INSTALLATION
•
Designed to install directly on wall with the help of 4 screws
CONTROL GEAR
•
In-built integrated electronic LED driver
DIMENSION DRAWINGS
104
43
144
800/500
All dimensions are in mm Tolerance ± 2mm
ELECTRICAL DATA
Cat. No.
IP44
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
CRLA11008HP27-08
8
240
0.037
3
01
CRLA11008HP57-08
8
240
0.037
3
01
CRLA11008HP27-05
8
240
0.037
2
01
CRLA11008HP57-05
8
240
0.037
2
01
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
LED Post Top
High efficiency LED floodlight
SPECIFICATIONS
RESIDENTIAL AREA
PARKS & GARDENS
CAMPUS
P
CAR PARKING
ENTRANCE AREAS
RESORTS
•
Die-cast aluminum housing in pure Polyster UV resistant powder coated grey finish.
•
Top maintainable product with top opening die-cast cover
•
Anti-corrosive stainless steel screws & silicon gasket
•
HET PMMA diffuser
•
IP65 protection.
•
Driver duly wired up to terminal block.
•
Conforms to IS 10322 Part 5 / Sec 1 : 1987
INSTALLATION
•
Luminaire is suitable for pole diameter of 65-75mm. (Pole is not in Wipro's scope)
•
Cable entry through pole from bottom.
•
In- built electronic LED driver.
•
2 way 10Amps GFP mains connector
DIMENSION DRAWINGS
410
349
APPLICATIONS
All dimensions are in mm Tolerance ± 2mm
ELECTRICAL DATA
Cat. No.
LP02-501-XXX-57-XX
IP65
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
Case Lot
(in nos)
45
240
0.2
0
01
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
GardeniaLED
IP67 integral LED bushlight
SPECIFICATIONS
APPLICATIONS
PARKS & GARDENS
Die-cast aluminium, compact, aesthetic, pure polyester powder coated housing
•
IP67, optically sealed housing with toughened glass totally sealed using silicon
gasket ensuring IP and lifelong performance
•
High efficiency COB LEDs mounted on black anodised aluminium heat sink for
effective heat dissipation
•
Special high efficiency optical grade UV stabilized engineering plastic reflector
•
Available in 10, 24, 36 & 55 deg. beam angle
•
Inbuilt 2 stage, IP67, CCCV electronic driver with 2kV (DM) surge protection
•
Front maintainable with vandal resistant toughened glass giving access to driver and LED
•
Anti corrosive stainless steel hardware facilitates maintenance
•
Conforms to IS 10322 Part 5/ Sec.1:1987
•
Complete with LEDs and driver pre-wired up to terminal block
•
2 way 10Amps GFP mains connector
RESORTS
INSTALLATION
•
Cradle mounting
ACCESSORIES
•
Directional shield, Wipro Cat no. FFX 511
•
Earth spike in die-cast aluminum, Wipro Cat no. FFX 512
DIMENSION DRAWINGS
15
Ø1
2
16
93
RESIDENTIAL AREA
•
Ø16
Ø5.5
(2Nos.)
82
=40=
All dimensions are in mm Tolerance ± 2mm
ELECTRICAL DATA
Cat. No.
IP65
Power
(W)
Rated
Voltage (V)
Approx.
Weight (Kg)
Case Lot
(in nos)
Beam
Angle (deg)
LF05-450-010-27-XX
6
240
0.990
4
10
LF05-450-024-27-XX
6
240
1.5
4
24
LF05-450-036-27-XX
6
240
1.5
4
36
LF05-450-055-27-XX
6
240
1.5
4
55
LF05-600-010-27-XX
8
240
1.5
4
10
LF05-600-024-27-XX
8
240
1.5
4
24
LF05-600-036-27-XX
8
240
1.5
4
36
LF05-600-055-27-XX
8
240
1.5
4
55
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
MoonLED &
MoonLED SQ
Circular/square LED wall/ceiling light
SPECIFICATIONS
PATHWAYS
ENTRANCE AREAS
TOWNSHIPS
GARDENS
•
High efficacy and long life LEDs
•
Housing made of ABS plastic with white finish
•
CRCA with white powder coated finish
•
High Efficiency Translucence (HET) diffuser
•
Outer rim is made of ABS plastic and white finish
•
Easy to mount on true ceiling and quick to service
•
Driver duly wired up to the terminal block
•
Designed and manufactured to comply with IS 10322 part 5/Sec 1 1987
INSTALLATION
•
Suitable for surface/wall mounting
DIMENSION DRAWINGS
88
270
77
Ø210
270
APPLICATIONS
LW01
LW02
All dimensions are in mm Tolerance ± 2mm
ELECTRICAL DATA
Cat. No.
IP65
Power
(W)
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (Kg)
LW01-101-XXX-60-XX
13
LW02-101-XXX-60-XX
13
240
0.06
1.25
10
240
0.057
1.5
10
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
Case Lot
(in nos)
FormzLED
IP20 and IP65 non-integral flexible LED strip light
SPECIFICATIONS
APPLICATIONS
COVE LIGHTING
DOME LIGHTING
PERIMETER LIGHTING
•
Solid state high brightness SMD LED chips
•
Available in LED power of 4.8W per meter and 14.4 per meter versions
•
Can be cut at marked intervals to suit desired lengths
•
LS06 series with IP20 is suitable for indoor applications and LS26 series with
IP65 rating is suitable for outdoor applications
•
Long life span of LEDs
•
View angle of 120 degree
INSTALLATION
•
Designed for installation by adhesive back peel for easy installation
ACCESSORIES
•
Suitable driver to be ordered separately
ELECTRICAL DATA
IP65
Cat. No.
Power (W)
Supply Voltage (V)
LED Qty/meter
Length*
Color
LS06-005-120-WH-50 / LS26-005-120-WH-50
4.8W per meter
12
60
5
White
LS06-005-120-WW-50 / LS26-005-120-WW-50
4.8W per meter
12
60
5
Warm White
LS06-005-120-BL-50 / LS26-005-120-BL-50
4.8W per meter
12
60
5
Blue
LS06-015-120-WH-50 / LS26-015-120-WH-50
14.4W per meter
12
60
5
White
LS06-015-120-WW-50 / LS26-015-120-WW-50
14.4W per meter
12
60
5
Warm White
LS06-015-120-BL-50 / LS26-015-120-BL-50
14.4W per meter
12
60
5
Blue
Each unit is of 5 mts
DRIVER SPECIFICATIONS
Cat. No.
Input/Output Voltage
IP Rating
LG40-024
240V AC/12V
IP20
LG40-078
240V AC/12V
IP20
Output Wattage/Output Current
Dimension in mm (LxBxH)
Suitability
24W/2Amps
95 x 61 x 41
1 unit for 1no. of LS06/LS26-005
78W/6.5Amps
185 x 90 x 54
1 unit for 1no. of LS06/LS26-015
Order driver separately. Driver is for indoor use only. Single driver for 1 unit (5 meters) of FormzLED
LED is an ever improving and evolving technology. Wipro is committed to bring you the best in LED technology.
Data given is representative and can change.
O Floodlight
Integral floodlight luminaire with circular reflector
PATHWAYS
•
Textured gray pure polyester pressure die-cast aluminum compact and aesthetic cylindrical housing
with stylized propeller back
•
Independent lamp and gear compartments
•
Heat dissipation fins between lamp and gear compartment
•
High purity pre anodized aluminum reflector with options of wide beam and narrow beam distribution
•
IP 65 optically sealed lamp compartment with flat toughened glass with EPDM gasket
ensuring IP and lifelong performance
•
Front access lamp compartment for ease of lamp replacement without changing aiming angle
•
Rear access control gear for easy of maintenance
•
Rugged pure polyester powder coated aluminum mounting bracket
•
Anti corrosive stainless steel hardware
•
PG 11 cable gland to ensure IP 65 cable entry
•
Anti-glare matt black powder coated visor options: Cylindrical, conical, cross louver,
Directional shield
•
Conforms to IS 10322 Part 5/ Sec.1:1987
INSTALLATION
•
External cradle adjustable mounting arrangement suitable for mounting with
2 Nos. M10 bolts.
ACCESSORIES
•
Heavy-duty copper wound ballast
•
PF capacitor and electronic igniter pre-wired up to terminal block
•
4way 10Amps GFP mains connector.
•
Lamp holder base Rx7s porcelain body with silver contacts
DIMENSION DRAWINGS
Ø12
3 nos. holes
250.5
= 150 =
PARKS & GARDENS
SPECIFICATIONS
Ø200
315.5
APPLICATIONS
258
All dimensions are in mm. Tolerance + 2 mm
ELECTRICAL DATA
Cat. No.*
Lamp
WFH 20070N
WFH 20150N
IP65
Rated
Voltage (V)
Mains
Current (A)
Approx.
Weight (kg)
Case Lot
(in nos)
70 W MHL (HIT-DE)
240
0.41
6.5
01
150 W MHL (HIT-DE)
240
0.80
7.5
01
WFH 20070W
70 W MHL (HIT-DE)
240
0.41
6.5
01
WFH 20150W
150 W MHL (HIT-DE)
240
0.80
7.5
01
*Suffix N stands for narrow beam reflector and W stands for wide beam reflector
Fantasy Series
Fantasy | FBP 32
Fantasy | FWP 42/47
Fantasy | FPH 68
Die-cast aluminum pathway light,
Die-cast aluminium bollard with UV
Wall or ceiling light in reinforced
suitable for 70W/150W
stabilized polycarbonate diffuser,
theroplastic housing &
MHL (HIT-DE) lamps
suitable for18W/26W CFL (TC-D) lamps vandal resistant polycarbonate
diffuser, suitable for 18W/26W CFL (TC-D)
FDQ 45 & 46
Fantasy | FFQ 51
Decorative driveover with housing in
die-cast aluminium, clear toughened
glass, (FDQ 46-stainless steel ring)
suitable for 50W PAR 20 mains voltage
halogen lamps
Symmetrical bush light with housing
in die-cast aluminium with clear
toughened glass, suitable for 50W
PAR 20 halogen lamps
LAMPS & ACCESSORIES
Compact Fluorescent Lamp (CFL)
Fluorescent Tubular Lamps (FTL T5)
Fluorescent Tubular Lamps (FTL T8)
Available in 36w
Available in 14w/24w/28w
Available in 36W
High Pressure Mercury
Vapour HPMV (E)
High Pressure Sodium
Vapour HPSV (E)
High Pressure Sodium
Vapour HPSV (T)
Available in 80/125/250/400W
Available in 70/150/250/400W
Available in 150/250/400W
Metal Halide Lamps (E)
Metal Halide Lamps (T)
Metal Halide Lamps (DE)
Available in 70/150/250/400W
Available in 70/150/250/400W
Available in 70/150W
WBM 15 / WBS 20
WBS/H 56 & 57
WEH 24/29/35/45
Ballast for HPMV lamps
Open Construction Ballasts
Ignitor
Suitable for WBM 15 80/125/250/400W HPMV lamps
WBS 20 - 70/150/250/400W HPSV
lamps
Suitable for 70W/150W/250W/400W
HPSV & MHL lamps
Suitable for HPSV/MHL LAMPS
WIPRO LIGHTING LEDEDGE
Innovative lighting solutions for outdoor applications through:
• Energy saving solutions with latest international technologies
• Capability to service multi-locational accounts
• Service commitment: 35 branches and over 400 dedicated stockists
• Ease of contact through website
• Trustworthiness and reliability of Wipro
Wipro Design
India’s First
App on
Ligh ng Design
Design Office and Industry Spaces
Create and mail BOQs
View how designed spaces would look like
View latest offerings from Wipro
Download for free from
iOS and Google Play Store
Business Office:
Wipro Lighting, 5th floor, Godrej Eternia - C, old Pune-Mumbai road, Shivajinagar, Pune 411 005. India.
Tel.: 020-66098700, Fax: 020-66098777. E-mail: [email protected]
Registered Office:
Wipro Enterprises (P) Limited
‘C’ Block, CCLG Division, Doddakannelli, Sarjapur Road, Bangalore – 560035, India.
New Delhi: 011-41708121/29/91580 00353/8800300855/9999058768, Mumbai: 022-67213755/98206 09712, Bangalore: 080-41503260/
41503268/9880100588/8197730123, Chennai: 044-32518016/24769653/9903015566/91769 00666/9047297979, Kolkata: 033-44045886/
44045887/8420102239, Pune: 020-25510583/25535081/9822192284/9765410521, Hyderabad:040-27176082/27178906/
27178905/9000102233, Chandigarh: 0172-5018734/2660714/9814350562/9216108102, Ludhiana: 9814350562, Karnal: 9814350562/
9216108102, Dehradun: 9814350562/9216108102, Lucknow: 0522-2434352/9425072138, Patna: 8420102239, Guwahati: 8420102239,
Jaipur: 0141-2280289/077-42725365/98980 01521, Ahmedabad: 079-40073546/9898001521, Baroda:0265-2395830/35/36/41/45/
9898001521/9099924867, Surat: 9898001521/9099924867, Rajkot: 9898001521, Raipur: 0771-3265725 / 9425072138,
Indore:0731-3299668/9425072138, Bhopal: 9425072138, Jabalpur: 9425072138, Jamshedpur: 8420102239, Bhubaneshwar: 8420102239,
Vishakhapatnam: 9618456143, Nagpur: 0712-2569878/9425072138, Aurangabad: 9822192284/9765410521, Goa: 9822192284/
9765410521, Hubli: 9822192284/9765410521, Mangalore: 9961464188, Cochin: 9961464188, Coimbatore: 9961464188/9789779179,
Madurai: 9961464188
Innovation and Improvement are a way of life at Wipro. All rights reserved. Reproduction of this data in part or in whole
without permission is prohibited. Care has been taken to ensure that the information content within is correct. We
reserve the right to modify the product without prior intimation. Imitation of Registered Designs is a punishable offence.
www.wiprolighting.com