PPS News 04 - Service Box

Editorial:
During 2004, we launched the 407 and the new 607. Now, early in 2005,
we are already launching two important new vehicles in the Automobiles
Peugeot range: the 1007 and the 307 which, like the 407 and the new 607,
feature an all-CAN electrical-electronic architecture, to provide a higher
level of customer service.
The year 2004 saw the general installation of the Peugeot Planet System
tool. Now, early in 2005, this new diagnostic tool is already being used by
more than 8 000 users, world-wide. In 2004, our servers were accessed
more than 1 500 000 times, including a monthly average of
20 000 diagnostic sessions using Peugeot Planet Diag. These figures have
been steadily increasing throughout the year 2004.
The challenge for 2005 is thus to do better, and to achieve this, we suggest
that you discover our latest offerings, concerning both the diagnostic and
the actual PPS tool. You can thus discover the upgraded 307 Full CAN
diagnostic, the new features of the Peugeot Planet Office,
Peugeot Planet Diag and Peugeot Planet 2000 packages, and other new
features being prepared for future distribution. Of course, you will also
find your Hints and Tips section, to help you make the best use of PPS and
to answer your questions.
Contents
• Peugeot Planet office
overview and new features
• Peugeot Planet Diag
........................
p.2
..................................
p.4
• Contents of CD 0.5 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.12
• The new 307 Full CAN
diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.14
• Hints and tips
• Glossary
..........................................
p.16
..................................................
p.18
• Quality record
.........................................
We hope you like this issue, and have a good Diag session.
Automobiles Peugeot Methods Diagnostic group
New features
• The new 307 Full CAN diagnostic
...................................................................................................
PPS News N°4 is now available online,
on the Infotec site, section Diagnostic
https://www.infotec.peugeot.com
05.A
GB
520921(1)-D
p.14
p.19
Peugeot Planet office overview and new features
Foreword
When you installed release 04.C last November,
you discovered the Peugeot Planet office diagnostic
desktop.
Many of you are already using the desktop to access
the diagnostic and repair packages.
This article provides a little more information,
supplementing that published in the previous
PPS news.
Overview
Peugeot Planet office (PPo) is a software package that enables you to intuitively access all the repair and diagnostic applications
(PP2000, PPDiag, PPmeasure, etc.), and all the documentation available on the Peugeot servers (Infotec, Diagram, E-Reca, etc.).
PPo saves your previously entered data, so that you don’t need to re-enter it when running the repair and diagnostic software.
PPo only needs one download operation to update
all the repair applications: PP2000, PPmeasure,
PPDiag.
When starting up the system for the day,
PPo asks whether you want to check that your
package is up-to-date. This operation needs an
Internet connection.
If you don’t want to check immediately,
you can still go into the configuration management
menu (press F5), to update your application.
2
New PPo features in release 05.A
PPo enables you to access the vehicle electrical
documentation, using the vehicle VIN code, for the
many models that are covered by the application.
This means that you don’t have to re-enter the
model, the engine type and all the configurations
present on the vehicle!
However, to avoid confusion on the vehicle,
a screen is displayed so that you can confirm that
the data provided by the Peugeot information
system is correct.
This link to the diagram is only present
on
vehicles
accepting
this
upgrade
(307, 407, 607, 607R, 807)
We highly recommend that you should systematically use PPo, as it makes the package much easier and more convenient to use.
To help you, from release 05.A onwards, the link to the PP2000 application will open PPo.
3
Peugeot Planet Diag
1 - Peugeot Planet Diag new HMI
Your Peugeot Planet Diag package is now available
in a new presentation.
2 - Layout of the communication board
When Peugeot Planet Diag prompts a telecoding or downloading
screen, you can use Peugeot Planet 2000 to set up or download,
without interrupting the Peugeot Planet Diag session.
You can press keys
and
(simultaneously),
to activate Peugeot Planet 2000 and you can then set up
the parameter defined by Peugeot Planet Diag
(with Peugeot Planet 2000 already running).
4
When the parameter is set up, you then go back to Peugeot Planet Diag to continue your diagnostic session.
Caution, to go back to Peugeot Planet Diag,
Peugeot Planet Interface must be green.
On Peugeot Planet Diag, when you have answered the question
that was asked, the application continues the session.
3 - Vehicle lists
The various Peugeot Planet Diag functions, for each vehicle type, are shown in the list below.
1- Configuration
check
2 - Shortcut
information
3 - Guided
Diagnostic
June 2005
June 2005
June 2005
106
107
206 Multiplexed
Available
306
307 VAN architecture
307 CAN architecture
Available
Available
March 2005
March 2005
March 2005
Available
Available
Available
Available
Available
Available
307 R
405
406 Multiplexed
407
Available
607
607R
807 VAN architecture
807 CAN architecture
1007
Available
October 2005
October 2005
October 2005
April 2005
April 2005
April 2005
Boxer
Expert
Partner
5
4 - Diagram
To read the diagram, remember that the pins on the various elements (e.g. lights, sensor, etc.) are defined in the sense
of the pictograms.
• Sidelights
• Dipped headlights
• Headlights main beam
• Direction indicator
• Heating resistor
• Oxygen probe
6
5 - Links to diagram
Peugeot Planet Diag prompts the use of the diagram
to help your diagnostic.
- When you have clicked on
the link to the diagram...
... you then have the choice of:
the layout diagram...
... or the circuit diagram for the concerned
element.
7
6 - Quitting a diagnostic and analysis session
Our personnel have a lot of work analysing your unresolved Peugeot Planet Diag sessions (fault not found) by going back through
the information feedback in a sessions history.
For this reason, it is extremely important that you should exit properly from any session that you run:
• Unresolved session:
- Click on YES
- Click on BACK
or EXIT
8
• Resolved session (e.g. defective wire):
- Click on NO
- Click on YES
9
- Click on YES
or NO
- Click on BACK
or EXIT
As you use the system and we analyse your feedback information, these analyses will enable us to provide an increasingly effective system.
Example: an unresolved session analysed + resolved assistance record = solution incorporated in Peugeot Planet Diag
10
7 - Clearing fault codes
The Peugeot Planet Diag centralised diagnostic method is based on fine modelling of the vehicle malfunctions.
To be as efficient as possible, Peugeot Planet Diag uses the entire self-diagnostic (Fault codes, measured values, configuration, etc.)
from the vehicle computers. This self-diagnostic from the vehicle computers provides a considerable diagnostic aid,
and it is therefore extremely important that any fault codes should not be cleared, and the vehicle configuration in computer
memory must not be changed until you have run a diagnostic using Peugeot Planet Diag.
And this remains true, even if you used Peugeot Planet 2000 before Peugeot Planet Diag.
8 - Replacing parts
Important:
If a Peugeot Planet Diag diagnostic session indicates that a part should be replaced,
you can replace the part without having to request confirmation from the assistance
centres.
11
Contents of CD 05.A
407
307 CAN
N°
Computers
1
AAS
X
2
ABS 8
X
3
ADDGO
X
4
AIRBAG
X
5
ALARM
X
6
BSI
X
7
BTE
X
8
BVA
X
9
CCD
(CD loader)
X
10
CDPL
X
11
AIR
CONDITIONING
X
12
MM6LP
(EW10 J4S)
X
13
MM6LPB
(EW10A)
X
14
MM6LP
(ET3 J4)
X
15
SID 803
(DW10 BTED4)
X
16
ME745
(TU5 JP4)
X
17
EDC16C3
(DV6 ATED/TED4)
X
18
COM 2003
(HDC)
X
12
307 VAN
206 Mux
Partner
607 CAN
1007
407
307 CAN
N°
Computers
19
MULTI-FUNCTION
COMPUTER
X
20
EDP
X
21
EMF A+
X
22
EMF C-
X
23
ESP 8
X
24
GEP
X
25
MAE
X
26
RD4
X
27
RT3
(Telematics)
X
28
TO
X
29
EMF C-
30
EDC16C3
(DV6TED4)
31
BDM
32
MULTI-FUNCTION
COMPUTER
33
RT3
(Telematics)
34
BSI
Telecoding upgrade
35
ESP TRW
Incorporate “Spare parts”
menu Incorporate “Retrofit”
menu Add AMVAR field in
telecoding
307 VAN
206 Mux
Partner
607 CAN
1007
NEW
NEW
Delete “BDM saved input”
MPs Add “headrest” TA
MP upgrade
Delete call self and manual test Delete telediagnostic intervals less than 600 miles
Telecoding upgrade
13
The new 307 full CAN diagnostic
The new 307 full CAN features:
- a 407 type key,
- two zone air conditioning with new front panel,
- the diagnostic socket is now positioned centrally, in front of the gear lever
(remove the ash tray for easy access).
The 307 full CAN diagnostic
After the 407 and the 607, the 307 adopts an architecture using the full CAN protocol. In terms of electronics architecture,
this upgrade paves the way for the launching of the new 307 R, in a few months time.
The Intelligent Ancillaries Unit (BSI) centralises and processes data from 3 networks:
- CAN HS I/S: 500 Kbps, linking the BSI to the dynamic computers in the engine compartment.
- CANS LS CONF : 125 Kbps, linking the BSI to the comfort network computers.
- CAN LS CAR : 125 Kbps, linking the BSI to the bodywork network computers.
The Peugeot Planet System diagnostic package incorporates the upgrades
of the 307 full CAN.
The 307 is equipped with a new, latest generation, BSI, of the same type as that of the new 607.This new unit provides enhanced
fault diagnosis, as its coverage has been broadened and its response time is much less than on the previous 307.
Computers layout diagram
14
Multiplexed architecture diagram
List of elements
0004
1282
1320
1630
5007
6031
6032
6570
6811
7020
7122
7215
multi-function computer
fuel additive computer
engine monitoring computer
automatic gearbox computer
rain/luminosity sensor computer
passenger sequential window up/down
unit + motor
driver sequential window up/down
unit + motor
airbag and belt tensioner
computer
pulsed sun roof motor computer
ABS computer
PAS electric pump unit
computer
multi-function screen
7500 parking aid computer
7800
7804
8025
8080
8410
8415
8480
8602
BSI1
BSR1
C001
CV00
PSF1
stability control computer
stability control accelerometer
gyrometer
RF air conditioning computer
RFTA air conditioning computer
(RD4) car radio computer
compact disc loader computer
telematics computer (RT3)
volumetric alarm unit
computer
intelligent ancillaries unit
trailer ancillaries unit
diagnostic connector (under ash tray
and accessible with ash tray removed)
under steering wheel switching module
computer (COM 2000)
engine compartment fuse box
15
Hints and Tips
Antivirus:
To determine whether your terminal is infected by a virus, simply run the antivirus, click on analyse, select your drive C:
and run the disk scan. If your terminal is infected, your antivirus will clean or isolate the infected file.
Deactivation code:
When you activate PP2000, you must carefully keep the deactivation code shown on the screen.
This is best done by printing the screen page, or copying and saving it.
Keeping records:
When you return your PPI or order a new element (following theft or loss) don’t forget to keep a record
of your shipment.
Internet Explorer:
Tool bars (google, yahoo, msn, etc, search bars) prevent Peugeot applications from running and must not be installed on
PPS terminals.
Setting up PPo using a proxy:
The LAN advanced parameters for using a proxy, in the Internet Explorer properties, are automatically recovered by PPo.
PPo has to be set up to use a proxy.
In PPo, click on F5 and then on “setting up proxies”, enter the login and password of a proxy user and check that all
the options are selected.The proxy address, port and exceptions (localhost, etc...) are already entered.
PPD:
If the message “diagnostic server connection impossible” is displayed:
• Click on F2 in PPo and check that the Peugeot Planet Diag application is available.
Also check that the Internet Explorer connection is operating properly.
16
PPi:
For any problem concerning communication between the PPi and Peugeot applications, check that the PPi connector is firmly
assembled and connected.
PPo :
If the message “Peugeot Planet interface is not connected to the PC” is displayed, restart the PPS terminal with the
PPI disconnected.
If you have problems when using PPo, press F12 to display a user guide.
If the PPS stops suddenly due to a discharged battery:
The following messages are displayed “Resuming windows”, “for troubleshooting press F8…”
Press the “Power” button until the PPS restarts.
Confirm on the “enter” button, to confirm the “delete restoration data” line.
The PPS then restarts normally.
Windows:
Don’t forget to completely cycle the battery (complete charge/discharge cycle) at least once per month, to ensure maximum
battery life.
When the battery is charged to around 100%, it must be disconnected from mains power.
17
Glossary
PPS
Peugeot Planet System, the Automobiles Peugeot diagnostic system that runs on a portable PC
and comprises a package of applications: PPD, PP2000, PPm, etc.
PPD
Peugeot Planet Diag: the Peugeot diagnostic software.
PP2000
Peugeot Planet 2000:, the Peugeot repair software.
PPi
Peugeot Planet interface: the interface between a PC
and a vehicle, enabling certain values measured on the vehicle to be accessed
and also provides a dialog facility with the onboard computers.
PPm*
Peugeot Planet measure: supplements PPS and is used to measure physical values.
This tool notably provides dual-probe oscilloscope multimeter functions (voltmeter, ohmmeter,
ammeter and LED test, etc.). In addition to these tools, PPm includes specific diagnostic programs,
such as reference graphs, test and simulation of O2/Lambda probes, etc.
PPo
Peugeot Planet office: diagnostic package that enables data recovered from the vehicle
to be distributed to other applications.
Modem
Modulator, demodulator: Communication interface that enables
digital data to be transferred between computers through a switched telephone network
(e.g.: Internet).
Router
Performs multi-directional data routing between the various hardware units.
Wifi
Wireless fidelity: technical term meaning data transmission by hertzian link.
WRS
Workshop Resource System: server used to activate or deactivate the various releases
of the PP2000 software.
DCS
Dealer Communication System: A PSA internal computerised communication network.
Users of DCS machines cannot install installations themselves.
On these machines, PP2000 is installed by PSA and must not be updated by CD-ROM.
This also applies to the SIR2001 application.
VIN
Vehicle Identification Number. Identifies the specific vehicle.
DAM
Date Application Method, (Built code number) indicates the day on which the vehicle was
manufactured. For Peugeot Planet 2000, this enables the right menus and programs to be displayed
that correspond to the vehicle.
DDV
Vehicle Description.
OS
Operating System.
In this case, Microsoft Windows XP Pro or Windows 2000 for DCS terminals.
HMI
Human-Machine Interface.
*PPm is in the process of being commercially released.
18
QUALITY RECORD
PP 2000
Diag 2000
Schématique
Send by e-mail to: [email protected]
or by fax: 01 46 90 65 95
Originating site:
Record completed by:
Date:
Tel.:
e-mail:
Fax:
Release
PP 2000:
Diag 2000
Vehicle:
DAM N°:
VIN code:
Computer
name:
Hardware P/N:
Software P/N:
Supplementary N°
for BSI
Number and release of COM 2000 if message
when downloading BSI 307:
Path followed (names of the successive menus):
Description of problem:
Answer to your question: (reserved for our group)
Thank you for your feedback,
Diagnostic Quality group
DTAV/PRME/MTEE/MPDE
Meudon - January 2005
520924(1)-B
19
DTAV