Hague Maximizer 7180 Brochure

Transcription

Hague Maximizer 7180 Brochure
7180
The right solution...
for your water
Full Size Performance In Compact Design
From our computerized solid-state control to our exclusive
directional flow screens, only the most advanced manufacturing
processes and materials have been used to build the Hague
Maximizer 7180.
• Built-in, Salt and Water Saving Technology
• Convenient Easy-Fill Salt Cabinet
• Quality Materials and Components
• Multi-Function Controller - Operates By Demand Mode or
Time Forced Regeneration
• Patented Capacity Guard - Never Run Out Of Treated Water
• Low Maintenance - Just Fill With Salt As Necessary
• Our Patented Packed Bed Mineral Tank Eliminates The
Need For A Second Tank
Model 7180
Up to 120 Minutes
18 min
2.5 kg (5.5 lb)
0.5 kg (1.1 lb)
400L (105 gal)
42 L (11 gal)
7180
Other Water Softeners
7180
1
BLENDING BYPASS VALVE
Our full 1 inch valve features 1 inch porting throughout
to maximize the water flow and a blending facility to
enable you to choose the degree of softness you prefer.
2
SYSTEM CONTROLLER
Operates in three languages and retains cycle settings
indefinitely, even through power failures. The time of
day setting remains in memory for up to seven days
without power.
3
WHOLE HOUSE, BUILT-IN,
SELF CLEANING FILTER
Filters dirt and sediment down to 20 microns - smaller
than the human eye can see. Plus, there’s never any
cartridges to change and no maintenance is required.
4
SAFETY SHUT-OFF SYSTEM
Incorporated into our unit to help prevent the
possibility of any overflows – just the kind of
detail you would expect from us.
5
FINE MESH RESIN
Our patented mineral tank with its screened
distributor system allows us to pack more resin
in the tank and backwash our unit with clean
soft water, therefore eliminating the need for
a second mineral tank.
6
PATENTED DIRECTIONAL FLOW SCREEN
7180
D i m e n s i o n s
650mm
292mm
470mm
S p e c i f i c a t i o n s
Max Hardness removed
Media
Salt used per regeneration
Regeneration time
Plumbing connections
Valve size
Salt storage
Electrical requirements
Max water temperature
Pressure range (min, max)
Footprint
Height
Clearance required above for
salt filling
Shipping weight
1426g
20.3L + 1kg ultrafil
variable 0.5kg - 5.4kg max
variable 18 minutes - 41 minutes max
1" BSP Male
1"
40kg
220 VAC, 50 Hz to 12V transformer
49 degrees C
1.4 - 8.3 bar
292mm x 470mm
650mm
270mm
39kg
Contact your local dealer:
Comprehensive Limited Warranty:
10 years on tank and cabinet. All mechanical parts
including electronic controls are covered for 3 full years
w w w. h a g u e w a t e r s o f t e n e r s . c o . u k