TRUCK HOPPER LINER.qxd

RHINO HYDE
High Mount
Truck Hopper &
Chute Liners
Mixing concrete can be a difficult process, and is especially taxing on your mixing
equipment. In recent years, the value of lining equipment has become readily
apparent; however, if you’re not using the proper lining materials, lining your equipment can cause excessively long shut-downs. The Rhino Hyde Products group
knows this, and for that reason, we have developed our High Mount Truck Hopper
Liners (contoured and non-contoured) and Main Chute Liners.
FEATURES:
One-piece, seamless design.
Specially-formulated Rhino
Hyde resists wear & sticking.
MOLDED
CONTOURED
HOPPER LINER
FOR
McNEILUS
TRUCKS
3/8” thickness for extended
wear-life.
Light-weight: about 50 lbs.
Easy installation: complete
job completed in an hour.
NON-CONTOURED LINERS ARE
AVAILABLE FOR BOTH HIGH MOUNT
HOPPERS AND FOR LOWER MAIN
CHUTES. THESE ECONOMICAL LINERS FIT ALL MAKES OF CONCRETE
TRUCKS, INCLUDING LONDON,
MCNEILUS, ADVANCE & OTHERS.
RHINO HYDE PRODUCTS. SINCE 1965.
INSTALLATION - High Mount Hoppers
The contoured hopper liner slides directly into the hopper because
it’s made specifically for the McNeilus hopper. Once in place, the
liner is secured through bolting or riveting in the following manner: 4
bolts (rivets) evenly spaced along the upper angle and 2 bolts (rivets) placed across from one another on the sides of the lower part
of the intake chute. Some drilling may be required.
Proven Applications.
Proven Products.
Cement Mixer Liners
Saddle Blocks
Cyclone Liners
The non-contoured hopper liners and main chute liners have a fabric-backing. These liners are installed by applying caulking along
the back-side perimeter of the liner and then securing with bolts &
nuts (not supplied) every 10” to 12” along the perimeter.
Should you have any difficulties during the installation process, we
invite you to call our on-site technical staff, who are able to troubleshoot your problem right over the phone, free of charge!
Filter Sectors
Classifier Shoes
Sizing Screens
Rollers
Belt Wipers
HISTORY OF RHINO HYDE
The first Rhino Hyde polyurethane liners were developed in the
early 1960’s by a grain company to solve its own abrasion problems
in chutes, spouts and hoppers.
In 1987, Tandem Products acquired the Rhino Hyde Products
Group, and began using the original formulation for new applications such as chemicals, aggregates, cement, concrete, mining and
other industrial material handling situations.
Through the years, we have developed additional formulations so
that we are able to offer our customers the best urethane component for your specific application.
Today, we are known for our high quality products, our exceptional
customer service and innovation, best demonstrated by our ability
to introduce new products to the market on a yearly basis.
We invite you to call or fax us today to find out more about our long
standing commitment to solving abrasion problems.
Deburring Tub Liners
Wheel Chocks
Elbows
Urethane Skirting
Impellers & Diffusers
Truck Bed Liners
Impact Pads
Uramic™ Panels
Salt Spreaders
Spout Liners
Drag Flights
Spray Defectors
Reli-A-Sense™ Level Sensors
Rhino Hyde Urethane Liners
Rhino Hyde Products, a division of Tandem Products, Inc.
3444 Dight Avenue South,Minneapolis, MN 55406
Toll Free: 800.533.0509 Tel: 612.721.2911
Fax:612.721.1009
E-mail: [email protected]
Web-site: www.tandemproducts.com