Domes Mirrors Convex Mirrors Camera Domes Specialty

4 page RalstonM 28909 r2_Layout 1 13-10-30 5:02 PM Page 1
Manufacturers of Safety & Security Mirrors
P.O. Box 263
Fergus, Ontario
N1M 2W8
Tel: (519) 787-1297
Fax: 1-800-669-2392
www.cansafe.com
Domes Mirrors
Convex Mirrors
Camera Domes
Specialty
Mirrors
Washroom
Accessories
A Division of
The Safety Zone (Canada) ULC
4 page RalstonM 28909 r2_Layout 1 13-10-30 5:02 PM Page 2
Domes
360° FULL DOME
· For 4-way intersections
· Comes with chains & hooks for hanging
(T-Bar clips available for drop ceilings)
· Edges protected by metal-reinforced, black
vinyl bumper trim, for extra strength and
protection of the edges.
Item No.
2000FD18
2000FD24
2000FD33
2000FD48
Description
18” 360° Full Dome
24” 360° Full Dome
33” 360° Full Dome
48” 360° Full Dome
180° HALF DOME
· For “T” intersections
· Should be fastened to wall or ceiling
(hanging requires 360° dome)
· Edges protected by metal-reinforced,
black vinyl bumper trim, for extra strength
and protection of the edges.
Item No.
2000HD18
2000HD24
2000HD33
2000HD48
Description
18” 180° Half Dome
24” 180° Half Dome
33” 180° Half Dome
48” 180° Half Dome
90° QUARTER DOME*
· For corner intersections
· Must be fastened to ceiling
(If not possible, use convex mirror instead)
Item No.
2000QD18
2000QD24
2000QD33
2000QD48
Description
18” 90° Quarter Dome
24” 90° Quarter Dome
33” 90° Quarter Dome
48” 90° Quarter Dome
* Note: Sizes indicated are for the full dome from which the quarter
dome is taken. Actual measurement of the quarter dome is therefore
smaller than indicated.
· 18”-33” domes are .118” thickness
· 48” domes are (thicker) .220” thickness for added strength and durability
Convex
INTERIOR CONVEX
· 100+ degree angle of view
· Ball & swivel plate attached directly to
mirror for lightness & economy
· Comes with telescoping arm & bracket
Item No.
1000CI12
1000CI18
1000CI26
1000CI30
1000CI36
Description
12” Interior Convex
18” Interior Convex
26” Interior Convex
30” Interior Convex
36” Interior Convex
EXTERIOR CONVEX
· 100+ degree angle of view
· Ball & swivel plate bolted to
weatherproof back
· Weatherproof metal frame
· Comes with telescoping arm & bracket
· All sizes available with a metal back for
high wind applications
Item No.
1100CE12
1100CE18
1100CE26
1100CE30
1100CE36
1100CEMB
Description
12” Exterior Convex
18” Exterior Convex
26” Exterior Convex
30” Exterior Convex
36” Exterior Convex
(size)
· CUSTOM MIRRORS AVAILABLE · SHEET · COLOUR · CUSTOM SIZES
4 page RalstonM 28909 r2_Layout 1 13-10-30 5:02 PM Page 3
Camera Domes
CAMERA DOME KITS
· Highest quality, optically pure domes for suspended ceilings
· Integral camera mounting bracket within ABS housing for easy mounting
and adjustments (complete kit in 1 box)
· Drop in panels in 2’ x 2’ x ¼” white, rigid foam, precision cut to fit dome
· Available in 6”, 8”, 10”, 12” and 18” diameters in clear, smoked or
coloured to match any decor
PENDANT DOMES - D10 Series
· Highest quality, optically pure 10” sphere in clear, smoked or coloured
acrylic to match any décor
· Complete kit in 1 box (camera mounting bracket and all hardware)
· ABS dome tops (not polystyrene) in white or black
· Ceiling or wall mount styles with “no tool” installation & adjustment
“DUMMY” DOMES
· Give the illusion of video surveillance and save $
· Available as see-through (part #: DD22-STM1) or opaque mirrored dome
· 2’ x 2’ drop-in for suspended ceilings
Specialty Mirrors
INSPECTION MIRRORS
· 8” scratch resistant
acrylic convex lens
· Tough light weight skid
plate
· Corrosion resistant arm
· A 40” long handle for
greater reach
· An adjustable, angled
head for increased
coverage
OTHER MIRRORS
“Roundtangular”
· Acrylic convex interior &
exterior mirrors trimmed
top & bottom to fit confined
spaces
· Mounting hardware included
· Rubber trim around exterior
model
Flat Mirrors
· Framed & unframed
acrylic mirrors from 12” x 12”
to 30” x 36”
· Mounting hardware included
· Chromed steel frame
· CUSTOM MIRRORS AVAILABLE · SHEET · COLOUR · CUSTOM SIZES
4 page RalstonM 28909 r2_Layout 1 13-10-30 5:02 PM Page 4
Washroom Accessory Mirrors
FIXED TILT MIRROR
Model 740 Series
· Satin finish, 20 gauge stainless steel welded frame
· Standard 6° angle to wall
· Welded corners
· Triple silver-plated ¼" float glass
740 Series Guide Specification
Fixed tilt mirror shall be framed with 20 gauge
stainless steel with 20 gauge concealed stiffeners.
Welded corners shall be polished to a uniform satin
finish. Mirror shall be of first quality ¼" float glass
guaranteed for 15 years against silver spoilage and
protected by a shock-absorbing, waterproof foam
filler with Poly-Glaze protective finish.
Back of unit shall be galvanized steel secured
to frame with concealed screws, equipped with
integral horizontal hanging brackets and separate
wall hanger for concealed mounting.
ANGLE FRAME MIRROR
Model 780 Series
· Satin finish, stainless steel angle frame
· Welded corners
· Theft resistant mounting
· Alternate reflective surfaces available
· Triple silver-plated .25” float glass
780 Series Guide Specification
Mirror shall be framed with heavy gauge, onepiece roll-formed ¾" x ¾" stainless steel angle with
double strength continuous integral stiffener.
Welded corners shall be polished to a uniform
satin finish. Mirror shall be of first quality ¼" float
glass guaranteed for 15 years against silver
Ralston Mirrors use only ‘Optically Correct’ Acrylic
and therefore offer the purest, clearest image in the
market.
Ralston Mirrors are thicker, for better strength and
durability.
A series of intricate machinery bring our mirrors to
fruition.
P.O. Box 263
Fergus, Ontario
N1M 2W8
Tel: (519) 787-1297
Fax: 1-800-669-2392
www.cansafe.com
RCS DCSM E 03/11
spoilage and protected by a shock-absorbing,
neoprene tubing with Poly-Glaze protective finish.
Back of unit shall be galvanized steel secure to
frame with concealed screws, equipped with
integral horizontal hanging brackets and separate
wall hanger for concealed mounting.