Gesamt-Katalog KrollundZiller - target
Transcription
Gesamt-Katalog KrollundZiller - target
G-ST-P/KN similar to ASME B 16.21 for ASME B 16.5 flanges G-ST-P/KN for non-load bearing flange joints Class 150 Ibs - 900 Ibs Dimensions in mm Class NPS 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 150 300 400 600 900 d1 d4 d4 d4 d4 d4 s1/s2 22 27 34 43 49 61 74 90 102 115 141 169 220 274 325 356 407 458 508 610 47 57 66 76 85 104 124 136 162 174 196 222 279 339 409 450 514 549 606 717 53 66 73 82 95 111 130 149 165 180 215 251 307 362 422 485 539 596 654 774 53 66 73 82 95 111 130 149 162 177 212 247 304 358 419 482 536 593 647 768 53 66 73 82 95 111 130 149 162 193 241 266 320 400 457 492 565 612 682 790 63 69 79 88 98 142 165 168 5/3 5/3 5/3 5.5/3.5 5.5/3.5 5.5/3.5 5.5/3.5 5.5/3.5 8/5 8/5 8/5 8/5 8/5 8/5 8/5 8/5 8/5 10/6.5 10/6.5 10/6.5 Available materials EPDM NBR-DUO FPM-S Thrust Ring Stainless Steel 1.4301 / AISI 304 other materials on request 22 Low Carbon Steel 1.0038/ St 37 zincplated and galvanized 206 247 289 358 434 498 520 574 638 698 838 G-ST-P/HTB VP 401/DIN EN 682 G-ST-P/HTB G-ST-Profile Gaskets Designed for steel flange joints in Fire – Safe pipesystems as well as connected fire fighting systems. DVGW approved up to 5 bar according to VP 401 Thrust ring style ”Kammprofil“ , 1.4571/AISI 316 Ti, layers of expanded graphite on both faces. Sealing lip made of NBR-DUO. Nominal Diameter DN 25 32 40 50 65 80 100 125 150 200 200 250 Nominal Pressure Class PN Dimensions in mm d1 x d2 x s1/s2 10-40 10-40 10-40 10-40 10-40 10-40 10-16 10-16 10-16 10-16 25 16 34 43 49 61 77 89 115 141 169 220 220 273 x x x x x x x x x x x x 71 82 92 107 127 142 162 192 218 273 284 329 x x x x x x x x x x x x 5.5/4.5 5.5/4.5 5.5/4.5 5.5/4.5 5.5/4.5 5.5/4.5 8/6 8/6 8/6 8/6 8/6 8/6 23 G-ST-P/OE G-ST-P/OE G-ST-P/OE-Profile Gaskets Profiles available currently Due to their innovative design, profile gaskets are the first choice to provide reliable sealing for flange joints with low static capacity. For example, the construction of an apparatus and containers will often combine slim flange faces with a small amount of bolts. Those and similar applications are perfectly covered by the type G-ST-P/OE. We will match your request through the right combination of elastomerlips and stainless steel inserts. Profiles Elastomerlips 18 10 8 10 1,5 Available materials EPDM NBR-DUO FPM-S Steel insert made of 1.4301/AISI 304 Others on request 25 Minimum inner diameter = 200 mm 8 2 10 13,5 25 10 2 12 13,5 35 2 10 2,5 10 12 23,5 45 12 33,5 24 G-ST-P/GR G-ST-P/GR G-ST-P/GR-Profile Gaskets in accordance with directive FDG - 0389 to suit flange joints with soft/hard rubber lining. Nominal Diameter Dimensions in mm DN d1 x d2 x d3 x s1 / s2 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000 1200 28 37 43 54 70 82 107 132 159 207 260 310 341 392 494 595 695 800 895 1000 1200 x x x x x x x x x x x x x x x x x x x x x 74 85 95 110 130 145 165 195 221 276 330 380 440 491 596 698 813 920 1020 1127 1344 x x x x x x x x x x x x x x x x x x x x x 54 64 70 82 102 114 140 163 192 240 293 342 373 430 532 635 735 840 940 1040 1245 x x x x x x x x x x x x x x x x x x x x x 3.5 3.5 3.5 4.5 4.5 4.5 4.5 5.5 5.5 5.5 5.5 5.5 8 8 8 8 9 9 9 9 9 / / / / / / / / / / / / / / / / / / / / / 3 3 3 4 4 4 4 5 5 5 5 5 7 7 7 7 8 8 8 8 8 25 G-ST-Wedge Ring G-ST-Wedge Ring Outer diameter according to DIN 2632, ASME B 16.5 PN 10 Wedge Ring infinitly variable Nominal Diameter Dimensions in mm weight DN d2 x d1 x s at 0° 40 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 89 102 127 142 162 192 218 273 328 378 438 490 595 695 810 917 1015 x x x x x x x x x x x x x x x x x 45 58 71 89 108 133 163 216 267 318 368 420 520 622 710 808 910 x x x x x x x x x x x x x x x x x 23 24 25 27 27 30 33 37 41 45 53 57 66 73 84 92 100 G-ST-Wedge Ring Class 150 s at 8° 29 31 34 37 38 43 48 56 64 71 84 91 108 120 141 156 171 kg 0.6 0.8 1.4 1.7 2.0 3.2 4.1 5.4 7.7 9.7 17.6 19.3 32.1 40.3 76.0 99.0 121.0 NPS 2“ 2 1/2“ 3“ 4“ 6“ 8“ 10“ 12“ Dimensions in mm weight d2 x d1 x s at 0° s at 8° 102 121 133 171 219 276 337 406 x x x x x x x x 55 68 84 110 163 214 268 320 x x x x x x x x 24 27 28 29 35 39 43 49 31 35 37 41 50 58 67 77 kg 0.92 1.39 1.54 2.61 3.89 6.16 9.50 15.90 Material: Carbon steel (1.0037), galvanized, electro-coated with epoxy polyester powder coating (potable water approval), colour acc. to RAL 5010, blue. 26 The Kroll & Ziller G-ST wedge ring is ideally suited for solving alignment problems during assembly or for filling large gaps in installation. The shell structure with inner elastomeric flat gasket - combined into one unit with pins - provides the posibility to solve misalignments from 0° to 8° without steps. The ideal combination with G-ST-P gaskets is approved for gas and drinking water and is a must for the practical engineer. Time is saved during assembly and flanges can be reliably sealed for service. Wedge Ring infinitly variable Nominal Pipe Size The quick answer to sealing problems The companies within the ZILLER-Group NILOS® HANS ZILLER GMBH & CO. KG Conveyor belt - equipment Conveyor belts and connections, vulcanising equipment, cold bonding adhesives TOPGUM, NILOS friction, reflex and wear protection coatings, knife-cleaning devices, moulded articles, sieve floors, sieve machines with new processing technology, planning and supply of complete conveyor belt repair workshops. ZILLER GMBH & CO. KG Roller bearing gaskets NILOS rings for ball and roller bearings, Z and RS bearings, labyrinth gaskets NILOS ring LSTO, spacer rings. KROLL & ZILLER GMBH & CO. KG G-ST flange and profile gaskets, other flange gaskets and packings Ask for the complete brochure. ple o e p t aske g e h T 27 Stand: 04/2003/GB KROLL & ZILLER GmbH & Co. KG Reisholzstrasse 15 D-40721 Hilden/Germany Telefon: +49 (0) 2103-951-500 Fax Inland/domestic: +49 (0) 2103-951-508,509 Fax Ausland/Export: +49 (0) 2103-951-510 eMail: [email protected] http://www.Kroll-Ziller.de ople e p t e ask The g