proven on the track built street

CHP - Jan 2017 Issue
on sale 10/28
LS1, LS2, LS3 & LS6
proof #
date:
BUILT
FOR THE
Upload Due: 9/7
STREET
Engine Install Kits
PRO-TOURING
KITS ALSO
AVAILABLE FOR
CHEVY TRUCK,
FULLSIZE,
NOVA, CAMARO,
CHEVELLE
& G-BODY
APPLICATIONS
Ask for it
by name!
For Chevy Fullsize, Camaro,
Chevelle, C-10 Truck
& G-Body
1967 Camaro
Stage IV
shown
COMPLETE
STAGE IV
KIT WITH
500 SERIES
POWER
STEERING
BOX
MADE IN THE
USA
8
GR ADE
PERF OR MA NCE UP
CK AGE
PA
E
ON
IN
L
AL
S
KIT
PRO-TOURING KITS
Includes our complete 13" front Big Brake kit, complete 12" rear Big Brake kit, 500 Series™ power steering box, chrome
master cylinder & proportioning valve combo, Totally Tubular™ upper & lower control arms, dual adjustable front coil-over
conversion kit, Pro-Touring front & rear sway bars and complete rear suspension system.
$
/kit
All-In-One Package - starting at
3978
Are you ready to install a modern, dependable,
lightweight, low maintenance, high powered V8 LS
engine into your classic Chevy? CPP has exactly what
you need to finish off that engine bay with their FitRite™
LS Engine Install Kits!
• For 4.8, 5.3, 6.0 & 6.2
Liter Applications
• Fabricated engine
perches
• Slim design tubular
transmission
crossmember
• Ceramic headers
with 02 sensor
bungs installed
• POLYPLUS™
Engine Mounts
• FIT Rite™ Adjustable
Engine Brackets
These kits with powdercoated finish will work on all LS motors
(except LS7) and 2000 and newer Vortec motors. Kit contents
may vary depending on application.
$
starting at
/kit
999
LS Engine Mount Kits
CPP's FitRite™ adjustable adapter
brackets allow you to fine tune engine
placement for optimal clearance and
fitment.
without Pads-starting at $99/kit
with PolyPlus™ Pads-starting at $129/kit
LS Cast Iron Exhaust Manifolds
NEW!
Raw shown
CPP introduces its LS Iron Exhaust manifolds with the
car builder in mind. The tight-to-the-block design makes
these fit a wide range of applications. The contoured
design provides excellent performance on engines up to
500 horsepower. Includes gaskets and mating flanges.
Choose from raw, chrome, black,
black ceramic coated or
Raw - starting at $
silver ceramic coated
225/kit
CPP carries a huge selection
of LS conversion components!
CHECK OUT MORE "SHOPTALK" at
www.CLASSICPERFORM.com
*Prices subject to change without notice. Images for illustration purposes only. Please note that
kit contents and prices will vary between certain applications. Please contact CPP for details.
Chevy Hi 17 Jan.indd All Pages
TILT
STEERING
COLUMNS
STEERING
WHEELS & MORE
starting at
199/ea
starting at
$
/ea
Direct replacement for the original manual
steering box and keep perfect alignment
with the OE or aftermarket column.
Compact and lightweight.
HUB ADAPTERS starting at $55/ea
COMPLETE PACKAGE All at one low price. starting at
279/kit
$
INTERNAL
BAFFLING!
EFI FUEL INJECTION-READY
ORIGINAL STYLE FUEL TANKS
starting at
REAR
COIL-OVER
CONVERSION
SYSTEM
Adjustable ride height from
1"-7" lower your ride.
SPECIFICALLY FOR
YOUR 1964-72
CHEVELLE!
49/ea
$
STEERING
ARMS
Reproductions for Nova, Camaro,
Chevelle and Fullsize Chevy.
MADE IN THE
starting at
69/pr
$
USA
starting at $569/kit
-ON
EA SY BOLT
FOR CHEVY
•1947-87 TRUCK
Galvanized steel powdercoated silver for maximum rust •1955-66 FULLSIZE
protection. No modifications required to mount. Kits
•1962-72 NOVA
include all the necessary mounting hardware. Pumps •1967-73 CAMARO
and sending units sold separately.
•1964-72 CHEVELLE
starting at $
/ea & EL CAMINO
229
FUEL PUMPS, SENDING UNITS & FUEL LINE KITS
Sending Units only - starting at $49/ea
Fuel Pump Kits only - starting at $190/ea
Fuel Line Kits only - starting at $235/kit
starting at
Ask for it
by Name!
CPP ADJUSTABLE
TRACTION BAR KIT
WE CARRY
ALL THE
ACCESSORIES
FOR YOUR NEW
TANK INSTALL
CLASSIC PERFORMANCE PRODUCTS, INC.
800-830-7657
714-522-2000 | Fax: 714-522-2500
ORDER OUR
CATALOG TODAY! 378 E. Orangethorpe Ave.,Placentia, CA 92870
(shown)
starting at
$1799/kit
Includes aluminum body
coil-over shocks, specially
designed conical springs
and all mounting hardware.
FOR CHEVY FULLSIZE, CHEVELLE, EL
CAMINO, G-BODY, CAMARO & NOVA
APPLICATIONS
339/kit
WRENCH AND BEARING KIT WITH
PURCHASE OF CPP FRONT COIL-OVER KIT
REAR
PRO-TOURING
Fully-adjustable, designed to provide
more ground clearance, requires no
modifications, and include all mounting
hardware for easy bolt-on installation.
These 1" diameter bars are compatible
with mono and multi-leaf applications.
starting at $299/kit
TALL SPINDLE
WHEEL BRAKE KITS
These kits utilize 13" rotors and require a minimum
17" wheel. C5 spindle is for the 1964-77 Chevelle,
1967-69 Camaro and the 1968-79 Nova. The 2nd Gen
spindle is for the 1970-81 Camaro, the first of its kind,
exclusive to CPP. Black and red calipers available.
$
EXCLUSIVE! Kit - starting at 649/kit
2ND GEN
DESIGN
C5 SPINDLES
only
starting at
269/pr
$
FOR CHEVY
FULLSIZE, CAMARO,
CHEVELLE, NOVA,
C-10 TRUCK &
G-BODY
STANDARD
FRONT
PERFORMANCE SWAY BAR KITS
1978-87
shown
279/kit
Pro-Touring-starting at $
BILLET SWAY BAR BRACKETS
Front Mounts-starting at $69/kit
Also available
separately.
Rear Mounts-starting at $89/kit
FOR CHEVY TRUCKS,
FULLSIZE, NOVA,
CAMARO, CHEVELLE,
EL CAMINO & G-BODY
Built with more ground clearance and work with most
aftermarket products. Available in black or silver powdercoated
finish and come 100% assembled with ball joints.
MADE IN THE
USA
Upper - starting at
Ask for it
by Name!
Lower - starting at
Complete Upper & Lower Set - starting at
337/pr
445/pr
$
733/kit
$
$
High quality, direct bolt-in unit puts out an amazing
1800 psi. Complete Show Stopper™ and Street
Beast™ systems
include master
cylinder, prop
Street
valve and
Beast™
hose kit.
shown
FOR CHEVY TRUCK,
CHEVY FULLSIZE,
CHEVELLE, EL
CAMINO, CAMARO,
NOVA, G-BODY &
UNIVERSAL
MADE IN THE
USA
Complete Kits-starting at $829/kit 469/ea
Bare Units-starting at $
HYDRAULIC BRAKE
ASSIST INSTALL KIT
Features an in-line filter, fitting
kit and brake bleeding syringe.
starting at $29/kit
Ask for it
by Name!
LS1, LS2, LS3 & LS6
ENGINE INSTALL KITS
Install an engine that requires no
maintenance, is super lightweight, and
puts out unbelievable horsepower and
torque. Includes oil pan, windage tray,
oil pick-up tube, engine side mounts,
engine side mount adapters, ceramic
coated headers and all mounting
hardware. Includes POLYPLUS™
Engine mounts.
Frame rail mount and heim design for aggressive performance
driving. Many front and rear applications available for Chevrolet
cars and trucks. Comes with billet mount
Standard-starting at $189/kit
upgrades.
TUBULAR
CONTROL ARMS
HYDRAULIC
ASSIST SYSTEMS
& BARE UNITS
*1962-67 NOVA KIT
FRONT COIL-OVER
CONVERSION
SYSTEMS
$
$
$
PUMP BRACKETS
39
1069/kit
starting at $
1489/kit
starting at $
For your leafspring car! From
daily driven cars to 8-second
outlaw cars, this system
starting at $449/kit
performs!
FOR A LIMITED TIME GET A FREE SPANNER
starting at
POWER
STEERING BOXES
Shown with
optional
upgrades
Convert your classic Chevelle to power
disc brakes with our brake package.
Retain a stock ride height with this
kit. Simple bolt-on installation with no
modifications required. Available
in 7", 8", 9" and 11" boosters.
379/pr
CALTRACS TRACTION BARS
629/kit
$
379/ea
POWER STEERING
PULLEYS starting at $32/ea
$
A-F-X COMPLETE STOCKPOR
DR O
FRONT & REAR
DISC BRAKE PACKAGE
SPLIT-LEAF SPRINGS
starting at
STEERING WHEELS
Ask for it
by Name!
These kits come with
crossmember, coil
springs, spindles,
performance brakes,
gas shocks, upper &
lower control arms, new
power rack & pinion, forged
hubs, and our Big
Bore™ calipers, plus
mounting hardware.
Available in 4.5 and 4.75,
5x5, 5x5.5, and 6 lug
patterns. Specify
manual or power
steering and stock or dropped spindles.
For most cars and light-duty
trucks. Substantially
lighter than
multi-leaf springs
for unsprung
weight savings.
FOR CHEVY TRUCKS, CHEVY
FULLSIZE, A, F, & X BODY
HUGE SELECTION OF
STEERING ACCESSORIES
TRACK
S
R
NE W POWOER E
M
R ACK &
Shown with
optional
upgrades
UPGRADES AVAILABLE: WILWOOD
CALIPERS, COIL-OVERS & AIR BAGS
14:1 SPOR T
R AT IO
Stainless steel adjusting
tilt columns in 28", 30",
32" and 33" lengths in plain,
chrome and black finishes.
Key, floor and shift columns also available.
starting at
MOR E TIR EE
C L E A R A NC
Upload Due: 9/7
E
11¾" TRUR
OTORS,
E
C
N
PER FORMA
WAY BAR ,
MUSTANG II IFS
INDEPENDENT
SUSPENSION SYSTEM
ON THE
ONLY
CROSSMEMBERS starting
at $209/kit
New billet aluminum cap
provides better clearance
& fitment. Kit includes
steering box, pump,
pump bracket, hoses and
necessary hardware.
289/ea
HORN
BUTTONS
PROVEN
POWER STEERING
CONVERSION KITS
starting at $
on sale 10/28
FOR CHEVY • 1937-59 TRUCKS • 1937-54 FULLSIZE • 1962-67 NOVA*
Ask for it
by Name!
Ask for it
by Name!
CHP - Jan 2017 Issue
Install Kits
starting at $
/kit
LS
ENGINE
LS CAST IRON EXHAUST MANIFOLDS
MOUNT KITS
Tight-to-the-block design makes these fit a wide range of
999
Raw shown
applications. Contoured design provides excellent performance
on engines up to 500 horsepower. Include gaskets and mating
flanges. AVAILABLE IN RAW, CHROME, BLACK AND BLACK
OR SILVER CERAMIC
Raw - starting at $225/kit
COATED FINISHES.
NE W!
Fine tune your
engine placement
for optimal
clearance and fit.
Shown
with
pads.
starting at $
99/kit
DON'T SEE WHAT YOU'RE LOOKING FOR? CONTACT US TODAY!
LET'S GET SOCIAL!
classicperform.com
Prices subject to change without notice. Please note that kits and prices may vary between certain applications.
9/19/2016 10:14:51 AM