FLEX EZ - Milliken Millwork, Inc.

Transcription

Your Doorway to a Beautiful Home
For more information on Milliken Millwork, Inc.
products and services, please visit:
www.millikenmillwork.com
ADJUSTABLE & FIXED STEEL DOOR FRAMES
MILLIKEN MILLWORK, INC. LOCATIONS
Michigan (HQ)
Ohio
Pennsylvania
6361 Sterling Drive North
Sterling Heights, MI 48312
586.264.0950
800.686.9218
Fax: 586.264.5430
400 Circle Freeway Drive
Cincinnati, OH 45246
513.874.6771
800.215.3770
Fax: 513.870.0242
172 Plummer Road
Sidman, PA 15955
814.487.7800
800.452.0251
Fax: 814.487.7850
E Z FLEX E Z
Steel Frame
Steel Frame
R
Part No. 110299 • 8/15
R
Installation Instructions
Why Milliken Millwork, Inc. for Light Commercial Products?
Commercial trends today require the strength and durability of commercial products but the warmth and comfort of residential styling. Our blended inventory reflects these
trends and allows us to respond quickly. Sourcing light commercial products can be complicated, time consuming and very frustrating. Our program is designed to simplify
that process.
It is driven by:
• Simplicity – Make it easy for you, your customer and Milliken Millwork
• Speed – Light Commercial Products delivered at residential speeds
• Convenience – “One Stop Shop” concept; residential and light commercial products from one, single source
Value added services are also required today to minimize errors and lower jobsite costs. Our program provides unique services to lower your costs and improve
the overall process such as:
Place header over wall,
centering header in opening.
If necessary, fasten temporarily
with nails or screws
For more information on our complete Commercial Product offering, please refer to our Commercial Doors, Frames and Hardware Brochure.
Both the EZ Flex and EZ Steel Frames are extremely durable and easy to install. Please refer to each of the frame’s specific installation instructions for more information.
Below are two cross sections breaking down the important components of each frame.
E Z Steel Framee
Specifically Designed
Tab System
Steel Casing - 22 Gauge
Alignment tab
holds miters tight
Specifically
Designed
Header
Hinge
Reinforcements
Nail/Screw Holes
Strike
Jamb
Aligns and holds
jambs in proper
position
Casing Clip Screw Holes
steel casing; aluminum,
Colonial steel or decorative
wood optional
18-gauge, two piece strike
for correct fit; ASA and
deadbolt strike available
Adjustable T-Strike
Oval Clearance Slots for
wood casing nails
Hinge
Jamb
ROUGH
OPENING
HEIGHT
Net frame height
+ 1/2"-3/4"
Finished
Floor
Hinge
Reinforcements
11 gauge plates are
welded to frame;
fits specified hinges
Universal Application
(Interior &
Exterior Application)
11 gauge plates
are welded to
frame; fits
specified hinges
Slip-On Drywall
Application
(Interior Application)
Wall Construction Wood Studs and Drywall
Recommended Fasteners:
1-1/4" (min.) Drywall Screws
Coarse thread or 6d common nails
ADJUSTABLE SPLIT-FRAME
Shipped Prehung or Knocked Down
1
ROUGH
OPENING
WIDTH
Nominal door
width + 1-1/4"
Adjustable T-Strike
Exclusive system
adjusts to a variety
of wall sizes
Using door as a template
adjust frame to door so that
clearances between door
and the frame are equal and
between 1/16" - 1/8". If a
door is not available square
and plumb the frame using a
carpenter’s square and level.
Fasten frame starting at top
of the hinge jamb with
recommended fasteners
Header
R
Casing Corner
Alignment tab
holds miters tight
steel casing standard;
aluminum, Colonial steel
or decorative wood
optional
Plate System
To apply wood casings, hold casing against frame and mark the location of each
oval nailing slot (see figure below). Then place the edge of the casing 1/4" from
the inside edge of the frame. Locate 6d finishing nails at locations marked, 1/2"
from inner edge of the scaling. This will allow nailing through the oval slot.
5
Remove nails or screws used to
hold the header. Pull down on
header so that the jambs rest on
finished floor. If the finished floor
is not installed, place a shim of
the same thickness as finished
floor, under each jamb. Insert
one screw or nail at top of hinge
jamb. Install door and close
in opening.
Closure
Casing Corner
Aligns and holds
base header
and closure
4
Repeat step 2 for the
strike jamb
R
Steel Frame
Base
Hold hinge jamb at an angle,
slide jamb over wall, positioning the door stop between
header tabs and the header
door stop.
6
Frames & Components – Easy installation
E Z FLEX
3
2
1
• Prehanging – Many light commercial and fire doors can actually be prehung
• Prefinishing – Yes, we provide residential or light commercial doors and frames painted in 25 popular paint colors
Wall Construction Metal Studs and Drywall
1-1/4" (min.) Type “S” Bugle Head
Self-Tapping Screws
FIXED FRAME
Shipped Knocked Down Only
6
1
2
Place bottom of door unit in bottom of opening. Lean top
of door away from wall. Have helper caulk bottom of sill.
Stand door upright, centered in opening and against wall.
Use a level to plumb hinge jamb.
Secure near top corner with a drywall screw.
Steel Commercial Frames from
3
Install screws in the hinge jamb, start at top,
checking for plumb as you work to bottom.
(Closed)
E Z FLEX
4
Remove prehang clip and open door. Square
header to hinge jamb. Install drywall screw in
center of header.
5
Close door and secure strike jamb using a 1/8"
spacer for a consistant gap thru bottom - Install
remaining screws in header.
8
7
Slide header closure trim into header. Adjust
vertical and header closure trims for a good
fit in top corners.
10
Clear out remaining wood with chisel. Test
depth and clearance with the plastic deadbolt
strike box.
Secure the header closure trim and jamb
closure trim near the top corners. Then install
the remaining screws.
11
Pull weatherstrip out of the kerf near sill to
allow room for caulking. Install sill extender
if required.
6
On the other side of door, slide the jamb closure
trims into the jambs, starting from bottom.
9
Prepare stud for deadbolt clearance. Bore a 7/8"-1"
hole to a depth of 1" from face of frame. Drill a 3/8"
diameter hole at corners - 1" from face of frame.
12
Allow caulk to set before reinserting weatherstrip.
Caulk outside sill and closure trim to floor. For exterior,
caulk frame to closure trim at jambs & header (as
arrow indicates).
13
Install lockset and deadbolt per manufacturer’s instructions. Install strike plate supplied with lockset. Install deadbolt strike plate and plastic dust box or blank plate
with two #8-32 x 3/8" flat head screws - and you’re ready to go.
WARNING: The 90 minute fire rating is VOID unless this frame is installed with the closure kit.
5
(Open)
R
Steel Frame
E Z Steel Framee
R
18 Gauge Steel* Adjustable Split Frame
18 Gauge Steel Fixed Frame
Our EZ Flex Steel door frame is an adjustable steel frame with a kerf for weatherstripping
designed for prehanging applications for residential or light commercial, new or remodeling
construction. The EZ Flex Steel Door Frame is also a solution for 90 minute applications for
house to garage as well as light commercial and multi-family projects where prehung door
units save time and money on installation. Other specs include:
Our EZ Steel door frame is a fixed throat prefinished standard and kerf
steel door frame designed for interior applications in new construction
and light commercial projects such as assisted living, hotel/motel, office
and residential. Other specs include:
• Warnock Hersey
neutral and positive pressure fire rated label,
wood or steel studs
• Constructed of 18 gauge galvannealed A60 steel
FIRE
FIRE
• CanRATING
be prehung
45MIN
MIN with adjustable or ADA compliant sill
RATING 45
• 3 adjustable frame sizes available**:
4-1/2"-5-1/2" 5-1/2"-6-1/2" 6-1/2"-7-1/2"
(1" adjustments, special/custom sizes are available**)
• 1-3/4" doors only
• 5/8" stop height
• Removal without damage to the existing wall
• Includes anchoring holes and nail clearance slots for wood casing
• Prefinished White or field paintable
• Hinge Prep for 4"
• 2-3/4" deadbolt prep and 2-3/4" adjustable T-strike prep
Options
• Special hinge or strike locations
• 4-7/8" ASA strike prep
• 2-1/4" Full lip strike prep
• Standard threshold prep
• Aluminum or Steel Casing
• Can be shipped prehung or knocked down
• Custom paint colors available - special order
* M
ain frames are 18 gauge and closure trim is 22 gauge for walls up to 7-1/2" walls
over 7-1/2" is 18 gauge
** Stock sizes may vary between distribution centers
*** Hinge prep may vary between distribution centers
• Warnock Hersey
neutral and positive pressure fire
rated label, wood or steel studs
FIRE
FIRE frame sizes available**:
• 2 Fixed
45MIN
MIN
RATING
RATING 45
4-5/8" 4-7/8"
(10 other sizes varying from 4" to 7-3/8" are available as well
as special/custom sizes**)
• Available for both 1-3/8" and 1-3/4" doors
• Removable without damage to existing wall
• Hinge preps: 4" and 4-1/2"***
• 2-3/4" adjustable T-strike prep
• Prefinished Brown or field paintable
• Prefinished steel casing to match frame (1-1/2" width)
Options
• Non-standard wall size
• 2-3/4" deadbolt prep
• Kerf fixed throat frame option
• Prefinished aluminum casing to match frame (1-1/2" width)
• Prefinished colonial casing to match frame (1-3/4" width)
• Shipped knocked down only
2
EZ Flex & EZ Steel Frame Profiles
Commercial Steel Frame Warranty
(Adjustable Split-Frame)
(Fixed Frame)
The Warranty for Milliken Millwork, Inc. Commercial Steel Frames is to the original consumer purchaser to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase. All warranties for commercial use are limited to one (1) year from the date
of purchase.
5/8"
1-9/16"
1-29/32"
VARIES UNDER
4-3/4" WALL
2-3/32"
VARIES
1-29/32"
15/32"
5/8"
CLOSED
4-1/2" Wall
1-7/8"
7/16"
RO.050
Milliken Millwork, Inc. Commercial Steel Frame Warranty
OPEN
0.039-0.045" main jamb
MAIN JAMB
1" Adjustment
1-25/32"
CLOSURE TRIM
CLOSURE TRIM
RETAINER
44-5/8"
5/8”
or
4 7/8”
or 4-7/8"
VARIES
1.94" to 4.94"
This warranty is applicable only when the product(s) covered by it have been installed in accordance with the recommended written installation
instructions of Milliken Millwork, Inc. and with established building practices, have been accorded treatment which is considered good practice
in the building industry regarding handling, storage and maintenance, and have been subject to only normal use. Because Milliken Millwork, Inc.
cannot control the manner in which its products are handled after leaving its premises, this warranty does not apply to the accessories of any
product whatsoever. We exclude from this warranty any lock mechanisms or closer hardware, or other miscellaneous hardware, or any other door
attachments, or doors which we do not manufacture or furnish. The warranty covers normal usage and excludes a product: with scratches or
abrasions; that has been altered, improperly installed, abused or misused; that has been damaged by acts of nature; or that has undergone
normal wear and tear.
ANY AND ALL IMPLIED WARRANTIES HERETO ARE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE.
WALL
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
1-9/16"
22 gauge or 18 gauge Closure Trim
walls up to 7-1/2" - 22 gauge
walls over 7-1/2" - 18 gauge
In the event the original consumer purchaser of any Milliken Millwork, Inc. Commercial Steel Frame product believes that the frame or any parts thereof
covered by this warranty are defective, a letter outlining the alleged defect should be sent postage prepaid to the following address:
Milliken Millwork, Inc.
Attn: Warranty Division
Opening Sizes & Commercial Door Handings
Commercial Door Handings
(Viewed from Keyed Side of Door)
Any Milliken Millwork, Inc. Commercial Steel Frames, or any parts thereof covered by this warranty which, upon inspection by an authorized
representative of Milliken Millwork, Inc., are found by said representative to be defective will be repaired, replaced or, at the option of Milliken
Millwork, Inc., the purchase price of the frame or part will be refunded and does not include labor, installation costs, finishing costs, or indirect or
consequential damages of any nature. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
INSWING
LEFT HAND
RIGHT HAND
LEFT HAND ACTIVE
RIGHT HAND ACTIVE
LEFT HAND REVERSE
RIGHT HAND REVERSE
LEFT HAND REVERSE ACTIVE
RIGHT HAND REVERSE ACTIVE
OUTSWING
Opening Sizes for Steel Frames
Door Size
2/8 x 6/8
33"
3/0 x 6/8
37"
3/0 x 7/0
37"
3
Door Size
ROUGH OPENING
Width
Height
(Standard Sill)
81-1/8"
81-1/8"
85-1/8"
UNIVERSAL APPLICATION
(Interior and
Exterior Application
2/8 x 6/8
3/0 x 6/8
3/0 x 7/0
6/0 x 6/8
6/0 x 7/0
ROUGH OPENING
Width
Height
33-1/4"
37-1/4"
37-1/4"
73-1/4"
73-1/4"
81"
81"
85"
81"
85"
SLIP-ON DRYWALL
(Interior
Application
4
EZ Flex & EZ Steel Frame Profiles
Commercial Steel Frame Warranty
(Adjustable Split-Frame)
(Fixed Frame)
The Warranty for Milliken Millwork, Inc. Commercial Steel Frames is to the original consumer purchaser to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase. All warranties for commercial use are limited to one (1) year from the date
of purchase.
5/8"
1-9/16"
1-29/32"
VARIES UNDER
4-3/4" WALL
2-3/32"
VARIES
1-29/32"
15/32"
5/8"
CLOSED
4-1/2" Wall
1-7/8"
7/16"
RO.050
Milliken Millwork, Inc. Commercial Steel Frame Warranty
OPEN
0.039-0.045" main jamb
MAIN JAMB
1" Adjustment
1-25/32"
CLOSURE TRIM
CLOSURE TRIM
RETAINER
44-5/8"
5/8”
or
4 7/8”
or 4-7/8"
VARIES
1.94" to 4.94"
This warranty is applicable only when the product(s) covered by it have been installed in accordance with the recommended written installation
instructions of Milliken Millwork, Inc. and with established building practices, have been accorded treatment which is considered good practice
in the building industry regarding handling, storage and maintenance, and have been subject to only normal use. Because Milliken Millwork, Inc.
cannot control the manner in which its products are handled after leaving its premises, this warranty does not apply to the accessories of any
product whatsoever. We exclude from this warranty any lock mechanisms or closer hardware, or other miscellaneous hardware, or any other door
attachments, or doors which we do not manufacture or furnish. The warranty covers normal usage and excludes a product: with scratches or
abrasions; that has been altered, improperly installed, abused or misused; that has been damaged by acts of nature; or that has undergone
normal wear and tear.
ANY AND ALL IMPLIED WARRANTIES HERETO ARE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE.
WALL
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
1-9/16"
22 gauge or 18 gauge Closure Trim
walls up to 7-1/2" - 22 gauge
walls over 7-1/2" - 18 gauge
In the event the original consumer purchaser of any Milliken Millwork, Inc. Commercial Steel Frame product believes that the frame or any parts thereof
covered by this warranty are defective, a letter outlining the alleged defect should be sent postage prepaid to the following address:
Milliken Millwork, Inc.
Attn: Warranty Division
Opening Sizes & Commercial Door Handings
Commercial Door Handings
(Viewed from Keyed Side of Door)
Any Milliken Millwork, Inc. Commercial Steel Frames, or any parts thereof covered by this warranty which, upon inspection by an authorized
representative of Milliken Millwork, Inc., are found by said representative to be defective will be repaired, replaced or, at the option of Milliken
Millwork, Inc., the purchase price of the frame or part will be refunded and does not include labor, installation costs, finishing costs, or indirect or
consequential damages of any nature. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
INSWING
LEFT HAND
RIGHT HAND
LEFT HAND ACTIVE
RIGHT HAND ACTIVE
LEFT HAND REVERSE
RIGHT HAND REVERSE
LEFT HAND REVERSE ACTIVE
RIGHT HAND REVERSE ACTIVE
OUTSWING
Opening Sizes for Steel Frames
Door Size
2/8 x 6/8
33"
3/0 x 6/8
37"
3/0 x 7/0
37"
3
Door Size
ROUGH OPENING
Width
Height
(Standard Sill)
81-1/8"
81-1/8"
85-1/8"
UNIVERSAL APPLICATION
(Interior and
Exterior Application
2/8 x 6/8
3/0 x 6/8
3/0 x 7/0
6/0 x 6/8
6/0 x 7/0
ROUGH OPENING
Width
Height
33-1/4"
37-1/4"
37-1/4"
73-1/4"
73-1/4"
81"
81"
85"
81"
85"
SLIP-ON DRYWALL
(Interior
Application
4
1
2
Place bottom of door unit in bottom of opening. Lean top
of door away from wall. Have helper caulk bottom of sill.
Stand door upright, centered in opening and against wall.
Use a level to plumb hinge jamb.
Secure near top corner with a drywall screw.
Steel Commercial Frames from
3
Install screws in the hinge jamb, start at top,
checking for plumb as you work to bottom.
(Closed)
E Z FLEX
4
Remove prehang clip and open door. Square
header to hinge jamb. Install drywall screw in
center of header.
5
Close door and secure strike jamb using a 1/8"
spacer for a consistant gap thru bottom - Install
remaining screws in header.
8
7
Slide header closure trim into header. Adjust
vertical and header closure trims for a good
fit in top corners.
10
Clear out remaining wood with chisel. Test
depth and clearance with the plastic deadbolt
strike box.
Secure the header closure trim and jamb
closure trim near the top corners. Then install
the remaining screws.
11
Pull weatherstrip out of the kerf near sill to
allow room for caulking. Install sill extender
if required.
6
On the other side of door, slide the jamb closure
trims into the jambs, starting from bottom.
9
Prepare stud for deadbolt clearance. Bore a 7/8"-1"
hole to a depth of 1" from face of frame. Drill a 3/8"
diameter hole at corners - 1" from face of frame.
12
Allow caulk to set before reinserting weatherstrip.
Caulk outside sill and closure trim to floor. For exterior,
caulk frame to closure trim at jambs & header (as
arrow indicates).
13
Install lockset and deadbolt per manufacturer’s instructions. Install strike plate supplied with lockset. Install deadbolt strike plate and plastic dust box or blank plate
with two #8-32 x 3/8" flat head screws - and you’re ready to go.
WARNING: The 90 minute fire rating is VOID unless this frame is installed with the closure kit.
5
(Open)
R
Steel Frame
E Z Steel Framee
R
18 Gauge Steel* Adjustable Split Frame
18 Gauge Steel Fixed Frame
Our EZ Flex Steel door frame is an adjustable steel frame with a kerf for weatherstripping
designed for prehanging applications for residential or light commercial, new or remodeling
construction. The EZ Flex Steel Door Frame is also a solution for 90 minute applications for
house to garage as well as light commercial and multi-family projects where prehung door
units save time and money on installation. Other specs include:
Our EZ Steel door frame is a fixed throat prefinished standard and kerf
steel door frame designed for interior applications in new construction
and light commercial projects such as assisted living, hotel/motel, office
and residential. Other specs include:
• Warnock Hersey
neutral and positive pressure fire rated label,
wood or steel studs
FIRE
FIRE
• CanRATING
be prehung
45MIN
MIN with adjustable or ADA compliant sill
RATING 45
• 3 adjustable frame sizes available**:
4-1/2"-5-1/2" 5-1/2"-6-1/2" 6-1/2"-7-1/2"
(1" adjustments, special/custom sizes are available**)
• 1-3/4" doors only
• Removal without damage to the existing wall
• Includes anchoring holes and nail clearance slots for wood casing
• Prefinished White or field paintable
• Hinge Prep for 4"
• 2-3/4" deadbolt prep and 2-3/4" adjustable T-strike prep
Options
• Aluminum or Steel Casing
• Can be shipped prehung or knocked down
* M
ain frames are 18 gauge and closure trim is 22 gauge for walls up to 7-1/2" walls
over 7-1/2" is 18 gauge
** Stock sizes may vary between distribution centers
*** Hinge prep may vary between distribution centers
• Warnock Hersey
neutral and positive pressure fire
rated label, wood or steel studs
FIRE
FIRE frame sizes available**:
• 2 Fixed
45MIN
MIN
RATING
RATING 45
4-5/8" 4-7/8"
(10 other sizes varying from 4" to 7-3/8" are available as well
as special/custom sizes**)
• Available for both 1-3/8" and 1-3/4" doors
• Removable without damage to existing wall
• Hinge preps: 4" and 4-1/2"***
• 2-3/4" adjustable T-strike prep
• Prefinished Brown or field paintable
• Prefinished steel casing to match frame (1-1/2" width)
Options
• Non-standard wall size
• 2-3/4" deadbolt prep
• Kerf fixed throat frame option
• Prefinished aluminum casing to match frame (1-1/2" width)
• Prefinished colonial casing to match frame (1-3/4" width)
• Shipped knocked down only
2
Why Milliken Millwork, Inc. for Light Commercial Products?
Commercial trends today require the strength and durability of commercial products but the warmth and comfort of residential styling. Our blended inventory reflects these
trends and allows us to respond quickly. Sourcing light commercial products can be complicated, time consuming and very frustrating. Our program is designed to simplify
that process.
It is driven by:
• Simplicity – Make it easy for you, your customer and Milliken Millwork
• Speed – Light Commercial Products delivered at residential speeds
• Convenience – “One Stop Shop” concept; residential and light commercial products from one, single source
Value added services are also required today to minimize errors and lower jobsite costs. Our program provides unique services to lower your costs and improve
the overall process such as:
Place header over wall,
centering header in opening.
If necessary, fasten temporarily
with nails or screws
For more information on our complete Commercial Product offering, please refer to our Commercial Doors, Frames and Hardware Brochure.
Both the EZ Flex and EZ Steel Frames are extremely durable and easy to install. Please refer to each of the frame’s specific installation instructions for more information.
Below are two cross sections breaking down the important components of each frame.
E Z Steel Framee
Specifically Designed
Tab System
Alignment tab
holds miters tight
Specifically
Designed
Header
Hinge
Reinforcements
Nail/Screw Holes
Strike
Jamb
Aligns and holds
jambs in proper
position
Casing Clip Screw Holes
steel casing; aluminum,
Colonial steel or decorative
wood optional
Adjustable T-Strike
Oval Clearance Slots for
wood casing nails
Hinge
Jamb
ROUGH
OPENING
HEIGHT
Net frame height
+ 1/2"-3/4"
Finished
Floor
Hinge
Reinforcements
11 gauge plates are
welded to frame;
fits specified hinges
Universal Application
(Interior &
Exterior Application)
11 gauge plates
are welded to
frame; fits
specified hinges
Slip-On Drywall
Application
(Interior Application)
Wall Construction Wood Studs and Drywall
1-1/4" (min.) Drywall Screws
Coarse thread or 6d common nails
ADJUSTABLE SPLIT-FRAME
Shipped Prehung or Knocked Down
1
ROUGH
OPENING
WIDTH
Nominal door
width + 1-1/4"
Adjustable T-Strike
Exclusive system
adjusts to a variety
of wall sizes
Using door as a template
adjust frame to door so that
clearances between door
and the frame are equal and
between 1/16" - 1/8". If a
door is not available square
and plumb the frame using a
carpenter’s square and level.
Fasten frame starting at top
of the hinge jamb with
recommended fasteners
Header
R
Casing Corner
Alignment tab
holds miters tight
steel casing standard;
aluminum, Colonial steel
or decorative wood
optional
Plate System
To apply wood casings, hold casing against frame and mark the location of each
oval nailing slot (see figure below). Then place the edge of the casing 1/4" from
the inside edge of the frame. Locate 6d finishing nails at locations marked, 1/2"
from inner edge of the scaling. This will allow nailing through the oval slot.
5
Remove nails or screws used to
hold the header. Pull down on
header so that the jambs rest on
finished floor. If the finished floor
is not installed, place a shim of
the same thickness as finished
floor, under each jamb. Insert
one screw or nail at top of hinge
jamb. Install door and close
in opening.
Closure
Casing Corner
Aligns and holds
base header
and closure
4
Repeat step 2 for the
strike jamb
R
Steel Frame
Base
Hold hinge jamb at an angle,
slide jamb over wall, positioning the door stop between
header tabs and the header
door stop.
6
Frames & Components – Easy installation
E Z FLEX
3
2
1
• Prehanging – Many light commercial and fire doors can actually be prehung
• Prefinishing – Yes, we provide residential or light commercial doors and frames painted in 25 popular paint colors
Wall Construction Metal Studs and Drywall
1-1/4" (min.) Type “S” Bugle Head
Self-Tapping Screws
FIXED FRAME
Shipped Knocked Down Only
6
For more information on Milliken Millwork, Inc.
products and services, please visit:
www.millikenmillwork.com
ADJUSTABLE & FIXED STEEL DOOR FRAMES
MILLIKEN MILLWORK, INC. LOCATIONS
Michigan (HQ)
Ohio
Pennsylvania
586.264.0950
800.686.9218
Fax: 586.264.5430
400 Circle Freeway Drive
Cincinnati, OH 45246
513.874.6771
800.215.3770
Fax: 513.870.0242
172 Plummer Road
Sidman, PA 15955
814.487.7800
800.452.0251
Fax: 814.487.7850
E Z FLEX E Z
Steel Frame
Steel Frame
R
Part No. 110299 • 8/15
R

FLEX EZ - Milliken Millwork, Inc.

Transcription

Similar documents

“Over 125 Years of Quality” Double Acting Spring Hinges

Zak McKracken – Mayan Maze Map

kik-step®

kik-step®

kik-step®

1335BT - ADP Lemco

NARSTCO Steel Ties Give Short Lines Longer Life.

Heavy Duty Concealed Magnetic Catch suitable for full size doors

ZIMA 126-CS-Fabrication.indd

5000mc door machine