MotorUP Marine Engine Treatment

Comments

Transcription

MotorUP Marine Engine Treatment
MO
OT
TO
OR
RUP M
Ma
arriin
ne
e
ENGINE TREATMENT
100% Synthetic
• Ultra-Corrosion Protection & Performance
•
•
•
•
800 Extreme Pressure Protection
Improves Power and Performance
Prevents Corrosion inside engine
Dry Start Protection
With water absorbing agents and corrosion inhibitors
M otor UP Marine Engine Treatment , fully synthetic engine treatment
is designed to protect an engine from the two most destructive forces encountered at
sea, corrosion and dry starting. Oxidation and corrosion contributes 10,000 times more,
to engine wear than friction. Loaded with active extreme pressure agents, water
absorbing and corrosion inhibitors, it avoids premature aging of the engine. Displacing
water, cleaning the surface, and chemically bonding to the metal, creates a long lasting
ultra-strong microscopic protective layer. Reducing corrosive wear, extends the usable
life of bearings and other sensitive engine components.
Contains MotorUP’s unique extreme pressure and anti-wear properties. A chemical film
prevents intrusion of salt and moisture and continues to provide lubrication protection at
start up until the oil in the oil pan can fully circulate.. Plus, M otor UP Marine
Engine Treatment improves power and performance. Reduces emissions,
maintains engine compression and prolongs engine life. Quietens noisy engines.
Reduces engine operating temperature.
- Protect your marine engine from oxidation, rust and corrosion.
- Feel instant boost in acceleration and horsepower.
- Less friction and wear prolongs engine life.
Join millions of satisfied MotorUP customers around the world, now!
For use on boats, ships, water-jets, watercrafts, snowmobiles, dirt bikes and any engine
in water and salt environments. Diesel, Petrol and turbo charged engines. Compatible
with synthetic and mineral oil.
NO NEED TO WAIT FOR AN OIL CHANGE – JUST POUR IT IN AND GO
Compatibility
Gasoline
Diesel
Synthetic - Mineral Oil
New/Old cars
Turbo Charged Engines
yes
yes
yes
yes
yes
Frequency of Use
Dosage
Every oil change
5% a 10%
of oil volume
We recommend 10%
on first application
1x 8oz, 240ml bottle will treat all vehicles with an oil volume of up to 1.5gals or 5ltrs
MotorUP Marine Engine Treatment complies with ILSAC GF4 and CG4 regulations for catalytic converters.
Contains no PTFE, MOS2, Cl paraffin, Zn, P or S.
Directions of use: Simply pour the entire contents of the bottle into the oil crankcase. Does not require an oil change
before adding. MotorUP Marine bonds to the metal in your engine, and continues to be effective even after you
change the oil. Continue to follow the manufacturer’s recommended service schedule.
.
Size:
-
240 ml
1 liter
4 liters
Fabricado en USA

Similar documents