Waltco Lift Gates - C Series Flipaway Gate

SERIES
C
Flipaway Gate
1,600 lb., 2,000 lb., and 2,500 lb. Capacities
An Industry Favorite in
Medium Duty Folding
Liftgates.
Products shown may feature optional equipment.
Content subject to change without notice.
Standard C Series Advantages Include:
HALF-DIP RIDE (Standard)
■■
Rugged steel half-dip or full-dip (wedge) platform designs
■■
Low bed height application models accommodate bed heights as low as 34”
■■
Power up / gravity down hydraulic system
■■
Sturdy mid-arm design provides required strength while reducing unit weight
■■
Torsion spring assist makes the platform easy to fold and unfold
■■
Reduced MaintenanceTM Features including:
– Closed-loop hydraulic system to reduce potential for fluid contamination
Platform is level at vehicle bed then
gradually tilts down as it approaches
ground.
Reduced maintenance and original
Flipaway design means smoother,
hassle-free deliveries.
OTHER STANDARD FEATURES:
■■
All wiring and connections meet or exceed all TMC recommended practices
■■
Charge line circuit protection
■■
Power unit shipped pre-mounted from the factory
■■
Weather-protective power unit enclosure
Powder coat finish with zinc primer on key liftgate components produces
a high-quality finish that is exceptionally resistant to corrosion and abrasion
■■
C Series Gate in stowed position
www.waltcoliftgates.com
Designed Simplicity - Maximum Performance
SERIES
C
Bed Ht: 34”- 45”
Specifications
Flipway Gate
(All models but the C-25 and CW-25)
Model
Capacity
Platform
ramp
C-15 SB*
1,600 lbs.
32”x 72"
4"
C-15 SB
1,600 lbs.
32”x 84”
4”
CW-15 SB
1,600 lbs.
36”x 72”
Wedge
CW-15 SB
1,600 lbs.
36”x 84”
Wedge
C-20 SB*
2,000 lbs.
32”x 72”
4”
C-20 SB
2,000 lbs.
32”x 84”
4”
CW-20 SB
2,000 lbs.
36”x 72”
Wedge
CW-20 SB
2,000 lbs.
36”x 84”
Wedge
2,500 lbs.
36” x 72”
4”
2,500 lbs.
40” x 72”
Wedge
C-25
†
CW-25 †
Note: “CW” denotes full-dip wedge style platform models; “SB” denotes standard bed. Bed heights from 46”- 52” are available as C-15 HB
and C-20 HB models. † Denotes 42” - 52” Bed heights.
*Eligible for Waltco’s Quick-Lift Program (see details below).
OPTIONAL EQUIPMENT:
■■
Dual Controls – adds a street side raise/lower control for driver convenience
■■ Hand-Held Pendant Control allows driver to operate the liftgate from ground
or bed level
■■ Platform options available:
– Galvanized – Aluminum
Cab Mounted Power Shut-Off Switch allows operator to shut-off power to
liftgate control switch(es) to prevent unauthorized use of the liftgate
■■
■■ Super Duty Steel Dock Bumpers protect the liftgate from damage caused by
backing into loading docks
■■ Power-up / Power-down Hydraulic System for consistent performance
regardless of weather conditions or temperature
■■ Remote Mount Pump Kit allows flexibility to relocate power unit when liftgate
mounting area is limited (recommended for low bed height mounting applications)
Walk Ramp Installation Kit allows liftgate to be used in conjunction with a
slide-out walk ramp (compatible only with ramps having 26” hook spacing)
■■
Order your Liftgate
today, and We’ll ship
it Tomorrow.
The C Series is one of many liftgates in our
Quick-Lift Program – Waltco will ship up
to three C-Series liftgates by the end of the
following business day. Or we pay the freight.
■■
Snubber Kit reduces potential liftgate wear caused by road vibration during travel
■■
Bed Extension for 102” wide vehicle
■■
Customized Options – contact factory
www.waltcoliftgates.com/quicklift
T: 800.211.3074
F: 800.211.3075
Email: [email protected]
Web: www.waltcoliftgates.com
Waltco Lift Corp.
Corporate Office
United States
285 Northeast Ave.
Tallmadge, OH 44278
P: 330.633.9191
F: 330.633.1418
Waltco Lift Corp.
United States
620 S Hambledon Ave.
City of Industry, CA 91744
P: 626.964.0990
F: 626.964.0149
Waltco Lift Inc.
Canada
90 North Queen St.
Etobicoke, ON M8Z 2C5
P: 888.343.4550
© Copyright 2013 WALTCO
3.13