WaltCo FSL Flipaway Liftgate

SERIES
FSL
Flipaway Gate
2,500 lb. and 3,000 lb. Capacities
The Industry’s Original
Low Profile Level-Ride
Platform Liftgate
Standard FSL Series Advantages Include:
■■
Large, low-profile, level-ride platforms
■■
Power up / gravity down hydraulic system
■■
Rugged wide-arm design provides greater load handling stability
■■
Torsion spring assist makes the large flipaway platform easy to fold and unfold
■■
Greaseable pins at key pivot points
■■
All wiring and connections meet or exceed all TMC recommended practices
■■
Charge line circuit protection
The FSL Series Flipaway features a
low-profile platform that minimizes
ramp incline allowing operators to
wheel carts and pallet jacks onto the
platform with ease.
SLIMLINE LEVEL RIDE (Standard)
Platform remains level from vehicle bed
to the ground.
OTHER STANDARD FEATURES:
■■
Weather-protective power unit enclosure
■■ Snubber Kit reduces potential liftgate wear caused by road vibration
during travel
■■ Powder coat finish on key liftgate components produces a high-quality finish
that is exceptionally resistant to corrosion and abrasion
FSL Series Gate in stowed position
Products shown may feature optional equipment.
Content subject to change without notice.
www.waltcoliftgates.com
Designed Simplicity - Maximum Performance
SERIES
FSL
FSL25 Bed Ht: 42”- 54”
FSL30 Bed Ht: 46”- 55”
Specifications
Flipway Gate
Model
Capacity
Platform
ramp
FSL-25
2,500 lbs.
38" x 72"
4”
FSL-25
2,500 lbs.
42” x 72”
12”
FSL-30
3,000 lbs.
48” x 80”
12”
OPTIONAL EQUIPMENT:
■■
Dual Controls – adds a street side raise/lower control for driver convenience
■■ Hand-Held Pendant Control allows driver to operate the liftgate from ground
or bed level
■■ Cab Mounted Power Shut-Off Switch allows operator to shut-off power to
liftgate control switch(s) to prevent unauthorized use of the liftgate
■■ Heavy Duty Steel Dock Bumpers protect the liftgate from damage caused by
backing into loading docks
Power-up / Power-down Hydraulic System for consistent performance
regardless of weather conditions or temperature
■■
■■
12-Inch Folding Ramp with 90° lock for load retention
■■ Remote Mount Pump Kit allows flexibility to relocate power unit when liftgate
mounting area is limited
■■ Rear Underride Guard Kit compliant with FMVSS 223 and 224 (available on
FSL-30 models)
T: 800.211.3074
F: 800.211.3075
Email: [email protected]
Web: www.waltcoliftgates.com
■■
Bed Extension for 102” wide vehicle
■■
Customized Options – contact factory
Waltco Lift Corp.
Corporate Office
United States
285 Northeast Ave.
Tallmadge, OH 44278
P: 330.633.9191
F: 330.633.1418
Waltco Lift Corp.
United States
620 S Hambledon Ave.
City of Industry, CA 91744
P: 626.964.0990
F: 626.964.0149
Waltco Lift Inc.
Canada
90 North Queen St.
Etobicoke, ON M8Z 2C5
© Copyright 2013 WALTCO
2.13