RC30 Product Description
Transcription
RC30 Product Description
Leica RC30 Aerial Camera System Overview The Leica RC30 is an aerial film camera system of top quality and performance, capable of acquiring the very best aerial photographs with black and white, color and false color aerial film. There are two lens options, with 6-inch and 12-inch focal lengths. Forward motion compensation, automatic exposure control and film data recording are provided as a standard feature. A comprehensive range of accessories includes filters, navigation sights and video intervalomers. The camera is part of an overall system, which may comprise of the Leica PAV30 gyro-stabilized mount, the Leica ASCOT Aerial Survey Control Tool, a GPS reference station, a GPS/IMU position and orientation system, and an optical window for pressurized aircraft. Product Description Key Features • PTW30 drive unit • Film Speed: PEM 32 to 600, in 12 steps • FMC Forward Motion Compensation • Filter Factor: 1x to 8x in 10 steps • PEM automatic exposure control • Exposure Correction: At 1/3 stop intervals • EDI film data recording, alphanumeric Operating Modes • RS232 interface (option ARINC 419) • SPIRAL: Serial exposures, controlled by moving spiral, with FMC; external exposure release; single exposure, with FMC; exposures controlled by Leica Geosystems ASCOT EDI Film Data Recording Internal Data: Camera status: aircraft voltage, v/h, shutter setting, aperture etc. • SINGLE: Single exposure, without FMC External Data: Mission data from ASCOT or user’s own hardware/software • INTERVAL: Serial exposures, controlled by intervalometer, with FMC Data Combined: Maximum 200 alphanumeric characters • Exposure Counter: With memory, 4-digit, externally re-settable and presettable FMC Forward Motion Compensation Motion of Pressure Plate: 1 mm/s to 64 mm/s Maximum v/h-Ratio: 0.30 rad/s for 153 mm lens cones 0.21 rad/s for 303 mm lens cones Maximum Correction: 640 µm image motion • v/h-Range: 0.006 rad/s to 0.300 rad/s • Overlap Selector: 0 to 99 percent, in 1 percent steps • Vacuum Setting Range: <100 mb (64 mb nominal) • Function Control Display: Voltage, power, fiducial marks, shutter, vacuum, overlap, image motion, FMC, PEM Operation Modes: SPIRAL, INTERVAL Camera Mount FMC Function Modes: PAV30 gyro-stabilized camera mount • Off: Exposure time limited by selected permissible image motion • Range of stabilization: • On: Automatic control of forward motion compensation based on v/h and f; FMC switches off when image motion is negligible (<1 mm/s) PEM Automatic Exposure Control Pitch (tip): –5° to +5° Roll (tip): –5° to +5° Drift: –30° to +30° Limitations for Pitch, Roll and Drift: Individually presettable Sensor • Located in lens cone • Spectral Range: 400 nm to 1000 nm • Maximum Sensitivity: Around 700 nm • Angular field covered: 80° Control Board • Located in drive unit • Microprocessor for shutter and aperture control Setting Ranges • Maximum Shutter Speed: Preselectable, 1/100 s-1/1000 s • Priority Diaphragm: f/4 to f/5.6, selectable in 1/3 stop intervals 2 Film Cassettes PKA4 film cassettes Identical Cassettes: For feed, take-up or spare Film Width: 240 mm (9 1/2 inch) Film Length: - Thin (0.08 mm, 3 mils): 219 m, 700 ft - Normal (0.11 mm, 4.5 mils):150 m, 500 ft - Thick (0.15 mm, 6 mils): 120 m, 400 ft Exposure Counter: Built in Lens Cones Option • 15/4 UAG-S lens cone with standard filters (haze 420 nm, yellow 525 nm) • NSF3-EK navigation sight, with short tube, and remote control of pitch, roll and drift Type: Wide angle Angle: 90° Calibrated Focal Length: f = 15 cm (6 inch) Aperture: f/4 – f/22 • NSF3-EL navigation sight, with long tube, and remote control of pitch, roll and drift Camera Configurations Standard Configuration, Single Camera Operation Shutter: 1/100 s – 1/1000 s, continuous • 30/4 NAT-S lens cone with standard filters (haze 420 nm, yellow 525 nm) Pilot View Type: Normal angle Angle: 55° Calibrated Focal Length: f = 30 cm (12 inch) Aperture: f/4 – f/22 Shutter: 1/100 s – 1/1000 s, continuous NSF3 ASCOT RC30 Viewfinders and Navigation Sight NSF3-E Navigation Sight for navigation and camera control Standard Configuration, Dual Camera Operation • Oblique view • Control of camera cycle Magnification: 0.5x Pilot View Field of View: 110° Angle of View: Oblique Forward: 85° Aft: 25° Reticles for: 88, 153, 213, 303 mm; PEM Camera Remote Control: Pitch (tip): -5° to +5° Roll (tilt): -5° to +5° Drift: -30° to +30° Camera Cycle Control: Moving spiral, intervalometer Exposure Counter: 3 digits Standard • NSF3-EM navigation sight, with medium tube, and remote control of pitch, roll and drift 3 Installation Diagrams For detailed specifications, please contact [email protected] and ask for complete installation drawings. NSF3 RC30 with 15/4 UAG-S (in PAV30 mount) PAS12 mount for NSF3 (with pitch/roll/drift control) DIRECTION OF FLIGHT 4 System Components Viewfinder/Navigation Sight RC30 Camera System 5 Optional Equipment On Request 419 513 Digital camera cycle display • Red filter, 600 nm 664 744 Distributor box RC30/PAV30 for simultaneous connection of up to 3 or 4 options to PTW30/PAV30 • Infrared filter, 705 nm 506 297 Circular level for PTW30 drive unit • Set of false-color filters, 520 nm, with filter for IR Transmission 100 percent/80 percent/60 percent for Kodak Aerochrome Infrared Films 563 777 Dual camera control for RC30(20)/RC30(20) Electrical Data 555 623 Dual camera control for RC30(20)/RC10 Power Supply: Aircraft battery 662 773 Spacer for PAV30, for alternate use of SAGA-F and other lens cones Operating Voltage: 23.5 V to 29.5 V DC 704 779 PAV30 — External control panel 664 746 PAV30-RS232 Communication Option, ComOp Maximum Permissible Residual Surge: 2 V pp Power Consumption: At 28 V and 20°C (68°F) (peak/peak) Single-Camera: 12 A, peak (<0.3 s) 15 A 872 050 PAV30 PosOp to accept data from Applanix POS Dual-Camera: 24 A 850 020 PAV30 external drift reference input vix ACU30 On Request • Interface to aircraft navigation system • Control of PAV20 (slave) through PAV30 • Analog Drift Reference for PAV30 Environmental Data Operating Temperature: RC30 Camera System: -40°C to +50°C Head of Viewfinder: -25°C to +50°C PAV30: -25°C to +50°C Filters For 15/4 UAG-S: Maximum Relative Humidity: 95 percent 332 681 Haze filter, 420 nm, AV 2 Maximum Ambient Vacuum: ICAO standard atmospheric pressure, altitude 50,000 ft/15,200 m 332 689 Dark yellow filter, 525 nm, AV 2 Weights: 332 809 Sandwich color filter, 400 nm, AV 2 for additional use of gelatin filters 367 220 Sandwich false-color filter, 520 nm, AV 2 for additional use of gelatin filters For 30/4 NAT-S: 367 212 Haze filter, 420 nm 367 213 Dark yellow filter, 525 nm 367 211 Sandwich color filter, 400 nm for additional use of gelatin filters 180 980 Sandwich false-color filter, 520 nm for additional use of gelatin filters 6 Net Weight without Case PTW30 drive unit, including cables 31.5 kg PAV30 camera mount, including cables 39.0 kg 15/4 UAG-S lens cone with 1 filter 58.0 kg 30/4 NAT-S lens cone with 1 filter 58.0 kg PKA4 film cassette 5.5 kg Film (150 m) on spool 5.5 kg Gross Weight with Case PTW30 drive unit, including cables 52.5 kg PAV30 camera mount, including cables 67.0 kg 15/4 UAG-S lens cone with 1 filter 80.5 kg 30/4 NAT-S lens cone with 1 filter 79.0 kg PKA4 film cassette 12.5 kg Viewfinders and Navigation Sights: Net Weight without Case NSF3-EM, including cables: 19.0 kg NSF3-EL, including cables: 19.5 kg NSF3-EK, including cables: 18.5 kg Gross Weight with Case NSF3-EM, including cables: 39.0 kg NSF3-EL, including cables: 39.5 kg NSF3-EK, including cables: 38.5 kg Information subject to change without notice. Copyright © 2002 Leica Geosystems. All rights reserved. Other brand and product names are the properties of their respective owners. Part No. RC30PD cc 10/02 Leica Geosystems GIS & Mapping Division 2801 Buford Highway Atlanta, Georgia 30329, USA Phone +1 404 248 9000 Fax +1 404 248 9400 gis.leica-geosystems.com