online catalog
Transcription
online catalog
42908 42905 Driveline BDL ‘Top Fuel Street Drive’ Primary Drive Kits 12 • Utilize a 14mm x 3 3/8"-wide belt which is the same as the top fuel racers use on the 600-plus horsepower machines • Kevlar clutch consists of nine 6 3/8"-diameter friction plates and eleven steel drive plates • Special pressure plate uses up to nine springs for varying spring pressure to accommodate any size motor on the market • Hub is made from 7075 aluminum and then hard anodized for superior strength • TF-1000 includes oil filter mount and side guard • TF-2000 includes everything in the TF-1000, plus a reversible outboard bearing support • Fit all Softail models 91 - 05 42905 TF-2000 42908 TF-1000 BDL 3" Belt Drive Kits with Billet Motor Plates Beefy, one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. Kits are available with an optional oil filter mount centered in the motor plate. The fanning condition set up by the spinning pulleys and belt creates extra cooling for the filter, and the kit allows the oil lines to be hidden out of the way. All of these kits include a 3"-wide belt drive unit with polished pressure plate, doublerow sealed mainshaft bearing, polished aluminum side plate and pulley covers, and a complete ‘Competitor Clutch’ with Kevlar plates. For installation in wide frame/tire applications, choose the appropriate insert to space the front pulley out for your particular frame and driveline combination. For Softail Models from 90-06 42644 Without oil filter mount For Dyna Glide Models from 91-05 612240 Without oil filter mount For Shovelhead Models with 4-Speed Ratchet Top Transmissions from 70-E79 with Starter Motor 42579 Without oil filter mount Note 1: Installation requires use of a 91-10 starter motor, and the use of a late 79-10 clutch arm (CC #18430) which must be modified to provide adequate clearance. Note 2: FX models require removal of the OEM oil tank bracket to allow proper starter fitment. Note 3: No provision is made for footpegs or floorboards with these kits. Replacement Belts 42515 Fits CC #612250, 612251, 612252, 612253, 42845, 42644, 42844, 42645, 42646 and 612240 43036 Fits CC #42508, 42579 Replacement Belt for BDL TF-1000 and TF-2000 42906 Replacement 14 mm x 33/8"-wide drive belt Replacement Clutch Plates for BDL TF-1000 and TF-2000 612260 Kevlar clutch plates (set of 9) 612261 Steel clutch plates (set of 11) Offset Pulley Inserts with Nuts* For wide rear tire applications choose appropriate offset insert. 42866 Pulley ONLY for Softail models 42868 .25" offset insert (*not applicable for TF-1000/2000) 42869 .50" offset insert (*not applicable for TF-1000/2000) 42870 .75" offset insert 42871 1.00" offset insert 42872 1.25" offset insert 612225 1.50" offset insert 612226 1.75" offset insert 612227 2.00" offset insert Primary Spacers* For wide rear tire applications choose appropriate primary spacer. 612230 .25" primary spacer 612231 .50" primary spacer 612232 .75" primary spacer 612233 1.00" primary spacer 612234 1.25" primary spacer 612235 1.50" primary spacer 612236 1.75" primary spacer (*not applicable for TF-1000/2000) 612237 2.00" primary spacer (*not applicable for TF-1000/2000) *Note: BDL Top Fuel Belt Drives use a .50" pulley offset insert as delivered. For wide tire applications, use a pulley offset insert that is .50" wider than the primary spacer. For example, to space primary 1.50", use a 2.00" offset insert and a 1.50" primary spacer. 12.04 BDL 3" Belt Drive Kit with 1 1/2" Offset Beefy, one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. This kit includes a 3"-wide belt drive unit with polished pressure plate, double-row sealed mainshaft bearing, polished aluminum side plate and pulley covers, and a complete ‘Competitor Clutch’ with Kevlar plates. 612224 Fits all Softail models from 90-99