A Spring Tool in Every Box - International Builders` Show

Spring Tools Impact Tools
Informational Package
May 2013
Overview
• Spring Tools are the most innovative spring driven
impact tools available on the market today.
•
Patented Designs, Made in the U.S.A., Precision Action up to 3500 PSI.
•
Superior design offer solutions for a wide variety of applications. Our Nail Set
products and Center Punches are guaranteed to be the best in the world.
•
Our tools are industrial grade quality are designed for the professional tool user.
•
Innovative solutions continue to be developed based on customer feedback and
market needs.
•
Every Spring Tool is warranted to be free from defects in material and workmanship
for the life of the tool under normal wear and tear, except for damage caused by
misuse or alteration.
How Spring Tools Work
•
•
•
•
All Spring Tools have a patented no pinch
design which ensures our tools are safe and
very easy to use. See following video. How
Springtools Work Video
Spring Tools have the finesse of delivering a
very small amount of energy to the target for
precision work but can also deliver a
whopping 3500 PSI to drive a large nail or
sheer a steel rivet.
Usage: The user should firmly hold tool tip
on target surface holding sure grip rings with
index finger & thumb. Rapidly pull back
other end of tool 2” to 3” inches with other
hand then release it like a rubber band while
continuing to firmly hold tip of tool on
intended target.
All Spring Tools are made in the U.S.A.
Metalworking Products
• We Offer individual tools and packaged
tool sets.
–
–
–
–
–
50X08 5 Piece Black Oxide Metal Working Set
HDID Identification and Stamping System
PPM503 4 Piece Metal Pin Punch Set
IPTS108 19 Piece Impact Fastener Kit
ACRR2 2 Piece Aircraft Rivet Removal Kit
Metalworking Tools
•
Prick Punch Center Punch 32R00-1
This Tool makes all other traditional center punches obsolete. One end operates as a prick punch to make small
accurate marks for precision layout. The other end of the tool is a center punch for deep indentations that any drill
bit can easily fit into without wandering. The impact developed by this tool is over 3500 lbs at impact and can
penetrate through a coin at full impact. Combo Prick/Center Punch Video
•
High Speed Steel Center Punch 28R45-1
The tip on this tool is machined from high speed steel and hardened to Rc65. This tool is designed to mark
hardened steel such as stainless, titanium round objects such as pipe or knock outs. Over time the tip can lose it’s
fine point but can be sharpened and will retain it’s hardness of Rc65.
•
Self Centering Transfer Punch 38R04-1
This tool has an internal piston and an outer bevel of 82.5 degrees. Through this unique design, this tool is an
ideal transfer punch or other metal on metal applications. The bevel will automatically center on the bracket hole
and the indentation will be perfectly aligned for drilling. self centing Video
•
5/16” Cold Chisel 44R10-1
This tool is designed to easily remove rivets, screw heads, & metal protrusions, burrs even weld pings. It easily
fits into tight spots and body mechanics find this tool to be very useful to remove or sheer rusted or difficult
fasteners. Cold Chisel Video
50X08 Metalworking Set
•
•
The 50X08 consists of 5 unique
black oxide tools designed for pro
applications and currently sold
through Snap-On, MAC, Cornwell
& and other mobile tool dealers.
Major Applications Include:
– Automotive & Customs
Restoration
– Layout & Design
– Building Maintenance
– Aircraft
– Body Shops
– Manufacturing Apps
– 5 Piece Set Video
HDIDS609
•
•
•
The HDIDS609 is a 39 piece metal
Identification stamping kit that
includes all alpha numeric characters
as well as key punctuation symbols
including the @, &, and period
symbol. video of HDID Stamper
Marks all mild steel metals as well as
other material. Full 5000LBS impact
without double marking. Characters
available in 1/8”, 3/16”, & ¼”
Major Applications include:
– Automotive engine teardown i.e.
pistons, rods, heads etc
– Design – marking components
for assembly
– Building Maintenance – marking
valves, keys, electrical systems,
doors etc.
– Custom Fabricators
– Identification applications
– Manufacturing Applications
PPX503
•
•
The PPX503 is a 4 piece pin punch set designed
to remove fitted pins such as roll pins, clevis pins
and other pressed in pins. The 4 Piece set is
available in (long) PPL503, (Medium) PPM503
and Stubby PPS503. 3500LBS Impact Potential
on Pin.
Major Applications include:
–
–
–
–
–
–
Automotive transmissions, carburetors and brake systems.
Military Applications
Gun Smiths & Repair
Custom Fabricators
Printing Press & other machinery applications
Manufacturing Applications
PPX503 Detail
P/N
Nomenclature
48R02-1
48R03-1
48R04-1
48R05-1
48R12-1
48R13-1
48R14-1
48R15-1
48R22-1
48R23-1
48R24-1
48R25-1
Long Pin Punch
Long Pin Punch
Long Pin Punch
Long Pin Punch
Medium Pin Punch
Medium Pin Punch
Medium Pin Punch
Medium Pin Punch
Stubby Pin Punch
Stubby Pin Punch
Stubby Pin Punch
Stubby Pin Punch
Diameter x Length
1/16” x 1 5/8”
3/32” x 1 7/8”
1/8” x 2 1/4”
5/32” x 2 1/2”
1/16” x 1 1/8”
3/32” x 1 1/4”
1/8” x 1 3/8”
5/32” x 1 1/2”
1/16” x 3/4”
3/32” x 3/4”
1/8” x 7/8”
5/32” x 7/8”
Deluxe Impact Driver IPTS108
•
•
•
TOOL SET FEATURES
The Pro-Driver is unlike any other tool on the
market today. This unique patent pending design
can easily re-facing damaged, corroded or rusty
fastener heads. 5000 lbs of impact can also shock
corroded or stuck threads for easy fastener
removal.
DESCRIPTION
The Pro Driver Handle is made from the toughest
acetal material available on the market today which
makes it practically indestructible. Bits are specialty
heat treated to Rc59- Rc61 to insure maximum
strength without shattering from applied impact.
Bits included are: Torx T20, T25, T30. Square
Recess S1, S2, S3. Slotted 5-6, 8-9, 8-10. Phillips
0, 1, 2, 3. ¼” socket extension, Center punch, ¼” &
5/16” nut drivers. Tool can also be used with other
specialty hex bits.
MARKETS
Avionics, General Mechanics, Maintenance
Professionals, shops & garages.
Metal Action Shots
Mark Any Material For Drilling
Sheer Rivets with Cold Chisel
RR1005 Rivet Removal Set
• The 2 Piece Rivet Removal Set easily removes rivets and
and mandrels without damaging aluminum surface.
•Video For Rivet Removal Pak
•5/16” Cold Chisel
44R10-1
This tool is designed to easily sheer rivets, screw heads, & metal protrusions without
damaging aluminum or metal surface. This chisel can sheer both aluminum & steel rivets
and easily fits into tight spots.
•High Speed Steel Center Punch
28R45-1
Although this tool is designed to be a center punch for very hard metals such as
hardened steel & titanium, it is also very useful for removing mandrel bodies after the
rivet heads has been sheered off. This tool does an outstanding job in both removing the
mandrel as well as any other objects obstructing the rivet hole.
Carpenters Tools
• Precision Woodworking Impact Tools
–
–
–
–
32R12-1 Our top selling tool in the Line
PM407 Paint Pro Pak
CA198 3 Piece Starter Kit
WWA1105 Deluxe 5 Piece Finishing Kit
Guaranteed To Be The Best Nail set On The Planet!
•
A little history as to why painters love our products. When a painter
does his prep work he must fill all of the nail holes prior to painting.
Well painters always find brads that did not set properly from a nail
gun. Painters call these protruding brads “shiners”. Old school
painters had to find a hammer & nails set then find all the shiners to
set. This can be frustrating at best! Our tool is the size of a pen and
can easily set any nail or brad without damaging the wood. This tool
easily fit into the painters whites and most importantly saves time,
money & never damages the wood. nail set video
–
–
–
–
–
–
–
Effortlessly fixes shiners without damaging wood surface.
Superb in tight spaces or in areas where a nail gun won’t fit.
Can easily drive & set a brad without bending it.
Will not mar wood surfaces or leave dents in wood.
Precision & control opposed to traditional nail set & hammer
3500lbs of impact so can easily set nails in hard woods.
Available in 1/32” & 2/32” Combo And 3/32” & 4/32” Combo
The Paint Pro Pak PM407 A Painters Best Friend
•
The PM407 Paint Pro Pak was specifically
designed for the painter. It includes the
32R12-1 and a door removal tool. Painters
do not like to carry bulky hammers on the
jobsite and using a hammer to remove a
door often damages trim & molding. This
solution is carried in Sherwin Williams stores
nationwide. Paint Pro Video
–
–
The Paint Pro Pak is the ideal solution
for the painter who needs to remove
doors without damaging door molding
and the nail set easily sets any
protruding nail or brad.
This solution allows the painter to
easily remove and replace pins with a
single tool that is light and easy to use.
The Product Merchandiser
•
The merchandiser is an ideal point of
purchase display unit that encourages
your customer to try out the tools.
Once the unit is deployed it becomes a
product vending machine.
•
The unit is free of charge when
purchased with a box of ten tools.
Recommend to be loaded with 5 paint
pro paks and 5 single nail sets.
P/N PMW5K5
Deluxe Finish Carpenters Set
•
•
The WWA1105 consists of 5
woodworking tools and is
invaluable for the carpenters and
other woodworking professionals.
5 PieceWood Video
Major Applications include:
–
–
–
–
–
–
Finish carpenter work
Cabinets & flooring
Building Maintenance
Furniture makers
DIY Market
Contractor Supply
WWA1105 Detail
•
Combination Center Punch and 2/32” nail set
This tool is ideal for precision center punching in wood & starting wood screws etc. The other end of the tool is a
2/32” nail set. nail set video
•
Combination Nail Starter and 2/32” nail set
This tool is designed to start small nails & brads that are difficult to hit with a hammer. This tool can effortlessly start
nails & brads at any awkward angle without ever touching the wood surface. Once brad is started finish it with the
2/32” nail set on the other end. combo nail starter & nail set
•
Counter Sinking Brad Setter
This unique tool is designed to uniformly countersink small finish nails ¼” below the surface of the wood material
without actually touching or marring the surface. Ideal on fine woods to hide nail holes etc.
•
Self Centering Center Punch
This tool is ideal for mounting brackets & hinges. The tool automatically finds dead center on the mounting
surface with 82.5 degree bevel and puts a guide hole perfectly centered for the mounting screw.
•
Wood Chisel
The wood chisel is designed to mortise excess material around doors & windows etc. This tool is perfect in hard to
Reach areas or areas where new hardware is mounted and wood material must be removed for perfect fit.
Woodworking Action Shots
Installing brackets & hinges
With self centering Center
Punch.
Countersinking nails in fine
wood.
Other Carpenter Sets
•
CA198 3 Piece Starter Set
–
–
–
–
•
Combination center punch & nail Set
Nail Starter Tool
Wood Chisel
MSRP $29.95
WC1005 Deluxe Wood Chisel Set
–
–
–
–
–
5/16” Square Chisel
¼” Sweep Gouge
90 Degree 3/16” V parting Chisel
5/16” #9 Sweep Gouge
MSRP $48.95
Spring Tool Packaging
•
Our products are available in industrial
packaging as well as retail packaging
•
We also offer OEM packaging for selected
customers
Paint & Hardware Product Merchandiser
•
PMW01 merchandiser unit is free with
any purchase of a box of 10 single
tools.
•
We also deploy the POP unit free for
industrial supply companies and
mobile tool jobbers to promote our
metal working tools. The unit comes
with a cold rolled steel plate on one
side and an aluminum plate on the
other.
THANK YOU
For more information please contact:
Eric Joel Thun
GM & Owner
509-926-0557
[email protected]