TCS1800 - TCS Audio
Transcription
TCS1800 - TCS Audio
TCS1800 SPECIFICATIONS DESCRIPTION The TCS1800 is a dedicated subwoofer loudspeaker system ideally suited for near to far throw applications. Having a common (to TCS1500/TCS2500) trapezoidal shape, it cab be easily stacked or flown to create accureate system arrays. The TCS1800 features a font loaded 18” woofer for maximum low frequency response. APPLICATIONS Used for permanent installations or portable touring systems. For use in: Live Music Clubs Large Worship Centers Concert tours Festivals Indoor and Outdoor Live Performance Venues FEATURE DATA NOMINAL AND PHYSICAL SPECS Model Number TCS1800 System Configuration Dedicated Subwoofer System Connections 2 x Neutrik NL4 LF system 18" Front Loaded Frequency Response ±3dB 25Hz - 120Hz Cabinet Type Trapezoidal Useable Low Frequency -10dB @ 21Hz Enclosure Structure 13 ply and 26 ply Baltic Birch Sensitivity (1 W/1 M) LF: 103 dB External Coating Duratex Max SPL (1 M) 137 dB SPL Grille Material Impedance LF: 8 ohms Foam backed 14 Ga. powder coated perforated steel Power Handling LF: 700 Wrms 1400 Wprogram Suspension Hardware 10 position flytrack 2 each top and bottom 3/8-16 flypoints - 4 each Dimensions: Height Width (front) Width (rear) Depth Weight 12.5 deg. per side Trapezoid Angle Replacement Parts 31 inches 27.75 inches 16.5 inches 25.5 inches 140 lbs. LF 1 ea. B&C Speakers 18PZB40 Due to continuous improvements, TCSaudio reserves the right to change any or all specifications without notice ARCHITECTURAL SPECIFICATIONS The TCS1800 shall be a dedicated subwoofer loudspeaker system and shall consist of one (1) front loaded 18-in. LF transducer. Frequency response shall be no more than ±3dB 25Hz - 120Hz on axis. The loudspeaker shall be capable of producing a maximum SPL of 137dB at 1 meter. The LF section shall handle a minimum of 1400 Watts with a nominal impedance of 8 ohms. The loudspeaker shall incorporate two (2) Neutrik NL4 connectors wired in parallel to enable chaining of multiple loudspeakers. The cabinet construction shall be of 13-ply Baltic Birch plywood on all sides with the baffle being 26-ply Baltic Birch plywood and shall incorporate extensive internal bracing. The cabinet shall be of a trapezoidal shape and consist of four (4) 10 position flytracks 2 each top and bottom and four (4) fly points to accept 3/8"-16 eyebolts. The cabinet shall be finished with DuraTex˙ finish. The transducers shall be protected with a foam backed Plastikote˙-finished 14 ga. perforated steel grill. TCSAUDIO.COM 1-800-403-4484 TCS1800 TOP NOTE: TOP DIMENSIONS MIRROR BOTTOM DIMENSIONS FRONT SIDE BACK TCS 31.00 27.50 27.75 25 ° CL 2.25 7.00 11.00 1.750 16.50 BOTTOM 1 NOTES: 2 3 STATUS: CURRENT PRODUCTION 1. MATERIAL IS TO BE 13 / 26 -PLY BALTIC BIRCH APPROVALS 2. WEIGHT IS TO BE APPROX. 140 LBS. SYMBOL t TITLE: Drawn: 3. DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED. LEGEND: SYMBOL SYMBOL DATE CRH 08/25/03 CRH 08/25/03 CABINET / FINISHED BLACK DURATEX – TCS1800 – Verified: Des. Eng.: INDICATES RUBBER FOOT. INDICATES MOUNTING POINT 3/8-16 THREADED HOLE (NUT PLATE) 12340 World Trade Drive San Diego, CA 92128 858-487-1600 FAX 521-6032 [ MECHANICAL DRAWING ] Mfg. Eng.: INDICATES FOOT CUP. INDICATES 10 POSITION FLYTRACK. Revision: Date Revised A Processor Settings TCS1800 Lo Shape Lo Frequency Hi Shape Hi Frequency Low Mid High Butterworth -24dB N/A 22 Hz N/A N/A N/A Butterworth -24dB N/A 80 Hz - 100 Hz N/A N/A N/A Recommended processor settings are based upon the use of BSS FDS-336/334 MINIDrive TCSaudio.com 1-800-403-4484