docBostitch tools catalogue
download 
Report Transcription
Bostitch tools catalogue
Framing F33PT INDUSTRIAL FRAMING NAILER 50mm-90mm, 33º Angle Features and Benefits: • • • • • • Accepts both Paper or Wire collated 33º framing nails 1,050 inch/Ibs driving power. The industry’s most powerful framer! Fastener length 50mm-90mm Converts to an MCN Nailer with included tip Lightweight Magnesium body - weighs just 3.6kgs Patented Push-Button Depth of Drive adjustment Accepts both Paper & Wire collated SENCO® or PASLODE® angle framing nails Paper Collated Stick Specifications: Driving Power: 1,050 inch/Ibs Fastener Length: 50mm to 90mm Fastener Diameter: 2.87mm to 3.33mm Magazine Capacity: 85 nails Operating Pressure: 70 to 120 PSI Power-to-Weight Ratio: 133 Tool Weight: 3.6kg O-Ring Kit: N89-ORK Wire Weld Stick Framing F28WW INDUSTRIAL FRAMING NAILER 50mm-90mm, 28º Angle Features and Benefits: • • • • • Accepts both Paper or Wire collated 28º framing nails 1,050 inch/Ibs driving power. The industry’s most powerful framer! Fastener length 50mm-90mm Lightweight Magnesium body - weighs just 3.5kgs Patented Push-Button Depth of Drive adjustment Paper Collated Stick Specifications: Driving Power: 1,050 inch/Ibs Fastener Length: 50mm to 90mm Fastener Diameter: 2.87mm to 3.33mm Magazine Capacity: 100 nails Operating Pressure: 70 to 120 PSI Power-to-Weight Ratio: 138 Tool Weight: 3.5kg O-Ring Kit: N89-ORK Wire Weld Stick Framing N100S HIGH-POWER FRAMING NAILER 50mm-100mm, 28º Angle Features and Benefits: • • • • Accepts both Paper or Wire collated 28º framing nails Aluminium housing for jobsite durability Extruded aluminium magazine survives falls High Power engine drives nails up to 100mm (4”) Paper Collated Stick Specifications: Applications: Driving Power: 1,350 inch/Ibs Fastener Length: 50mm to 100mm Power-to-Weight Ratio: 133 Operating Pressure: 70 to 120 PSI – Wharfs, docks and boardwalks – Heavy duty pallets & crates – Exterior decks and landscaping Wire Weld Stick ANGLED FINISHING NAILER 15 GAUGE Features and Benefits: • • • • • • • • • • 15ga Oil-Free Finishing Nailer Lightweight Magnesium housing for jobsite durability Oil-Free engine requires no lubrication, leaves no oil stains on work Tool-Free removable magazine for fast cleaning and jam clearing Adjustable depth control for quick countersinking adjustments Angled magazine for maximum manoeuvrability Bypass nail pusher simplifies loading to one easy step Molded rubber comfort grip Tool-Free adjustable exhaust Kit includes No-Mar Tip, 1,000 fasteners and blow-molded carry case Specifications: Applications: Fasteners: 15ga Angled Finishing Nails (FN15 Series) Fastener Range: 32mm to 64mm Tool Weight: 1.72kg Driving Power: 400 inch/Ibs Power to Weight Ratio: 105 Operating Pressure: 70 to 120 PSI – – – – – Interior Finish & trim Exterior Finish & trim Furniture Cabinet work Staircases Finish and Trim N62FNK-2 Finish and Trim N52FN-2 ANGLED FINISHING BRADDER 16 GAUGE Features and Benefits: • 16ga Oil-Free Finishing Bradder • Lightweight Magnesium housing for jobsite durability • Oil-Free engine requires no lubrication, leaves no oil stains on work • Tool-Free removable magazine for fast cleaning and jam clearing • Adjustable depth control for quick countersinking adjustments • Angled magazine for maximum manoeuvrability • Molded rubber comfort grip • Tool-Free adjustable exhaust • Kit includes No-Mar Tip, 1,000 fasteners and blow-molded carry case Specifications: Applications: Fasteners: 16ga Angled Finishing Nails (FN16 Series) Fastener Range: 25mm to 50mm Tool Weight: 1.69kg Driving Power: 330 inch/Ibs Power to Weight Ratio: 89 Operating Pressure: 70 to 120 PSI – Medium duty structural assembly Finish and Trim FN16250K-2 OIL-FREE C-BRADDER 16 GAUGE Features and Benefits: • Oil-Free engine prevents oil stains on work • Lightweight Magnesium body for job site durability • Zero Lock-Out™ feature prevents cycling when the magazine is empty • Adjustable Depth of Drive for quick countersinking adjustments • Open nose design for easy clearing if a jam occurs • Ultra quiet rear exhaust • Over molded rubber grip for added comfort • Storage for No Mar Tip on the tool • Heavy Duty blow-molded case with fasteners and No Mar Tips included! Bostitch® C-Series Brads Specifications: Applications: Fastener Range: 25mm to 64mm Fasteners: 16ga (1.54mm) C Series Brads Tool Weight: 1.5kg Driving Power: 290 inch/Ibs Power to Weight Ratio: 88 Operating Pressure: 70 to 120 PSI – – – – Interior finish and trim Exterior finish and trim Cabinet work Staircases Finish and Trim BT200K-2 STRAIGHT FINISHING BRADDER 18 GAUGE Features and Benefits: • Lightweight Magnesium housing for job site durability • Oil-Free engine • Open drive channel for easy jam clearing • Narrow nose for accurate fastener placement in hard to reach areas • Molded long-lasting rubber comfort grip • Tool-Free depth control • Convenient and quiet rear exhaust • Adjustable exhaust deflector • Kit includes C-1 brads and blow-molded carry case Specifications: Applications: Fastener Range: 16mm to 50mm Fasteners: 18 Gauge (1.30mm) C-1 Series Brads Tool Weight: 0.95kgs Driving Power: 170 inch/Ibs Power to Weight Ratio: 81 Operating Pressure: 70 to 100 PSI – – – – Cabinets Interior and Exterior Trim Panelling Crafts STRAIGHT FINISHING BRADDER 18 GAUGE Features and Benefits: • Lightweight Magnesium housing for job site durability • Oil-Free engine • Open drive channel for easy jam clearing • Narrow nose for accurate fastener placement in hard to reach areas • Molded long-lasting rubber comfort grip • Tool Free depth control • Convenient and quiet rear exhaust • Adjustable exhaust deflector • Kit includes C-1 brads and blow-molded carry case Specifications: Applications: Fastener Range: 16mm to 32mm Fasteners: 18 Gauge (1.30mm) C-1 Series Brads Tool Weight: 0.86kgs Driving Power: 145 inch/Ibs Power to Weight Ratio: 76 Operating Pressure: 70 to 100 PSI – – – – Decorative moldings Fine trim work Drawer pinning Dovetail joins Finish and Trim BT125K-2 Finish and Trim SB1842BN STRAIGHT FINISHING BRADDER 18 GAUGE Features and Benefits: • Aluminium housing for jobsite durability • Adjustable depth control for quick counter-sinking adjustments • Rubber grip for added comfort • Tool-Free adjustable deflector conveniently directs exhaust • No Mar Tip protects the work surface • Fastener view window provides a quick view of remaining fasteners • Kit includes oil, carrying case and 1,000 brads Specifications: Applications: Fastener Range: 16mm to 40mm Fasteners: 18 Gauge (1.30mm) C-1 Series Brads Tool Weight: 1.09kgs Driving Power: 135 inch/lbs Power to Weight Ratio: 56 Operating Pressure: 70 to 100 PSI – – – – – Interior Finish and Trim Furniture Cabinet work Panelling Crafts FINISH & TIM STAPLER KIT 18 GAUGE, LIGHT DUTY Features and Benefits: • Lightweight Aluminium housing for extreme durability • Bottom load magazine for fast loading and jam clearing • Narrow nose for accurate fastener placement in hard to reach areas • No Mar Tip protects the work surface • Molded long-lasting rubber comfort grip • Kit includes 18ga staples, tool oil and blow-molded carry case Specifications: Applications: Fastener Range: 12mm to 38mm Fasteners: 18 Gauge SX Series Staples Tool Weight: 1.18kgs Driving Power: 135 inch/Ibs Power to Weight Ratio: 52 Operating Pressure: 70 to 100 PSI – High production finish & trim – Frame assembly corner blocks & stretchers Finish and Trim SB150SX Finish and Trim SX150K-1 OIL-FREE FINISH & TRIM STAPLER KIT 18 GAUGE, INDUSTRIAL GRADE Features and Benefits: • • • • • • • • Lightweight Magnesium housing for extreme durability Oil-Free motor prevents oil stains on work Bottom load magazine for fast loading and easy jam clearing Rubber grip for added comfort Adjustable exhaust deflector No Mar Tip protects the work surface View window provides clear view of remaining fasteners Kit includes 1,000 staples and blow molded carry case Specifications: Applications: Fastener Range: 12mm to 38mm Fasteners: 18 Gauge SX Series Staples Tool Weight: 1.13kgs Driving Power: 170 inch/Ibs Power to Weight Ratio: 68 Operating Pressure: 70 to 100 PSI – – – – Interior finish & trim Exterior finish & trim Furniture Floor underlay & carpet installation – Staircases Specialty Construction N75C-1 INDUSTRIAL COIL NAILER 38mm-75mm, 15º Angle coil nails Features and Benefits: • Accepts both plastic and/or wire collated coil nails! • Lightweight Magnesium assembly • Tool-Free Depth-of-Drive adjustment • Tool-Free exhaust adjustment • Over-molded grip for comfortable use • Heavy Duty blow-molded case Plastic Collated Coil Wire Collated Coil Specifications: Applications: Fastener Length: 38mm to 75mm (15º angle coil nails) Fastener Diameter: 2.33mm to 3.33mm Tool Weight: 2.2kg Driving Power: 630 inch/Ibs Power to Weight Ratio: 129 Operating Pressure: 70 to 120 PSI Magazine Capacity: 300 nails – Light duty framing – Fencing – Decking Specialty Construction N66C-1 INDUSTRIAL COIL NAILER 32mm-64mm, 15º Angle coil nails Features and Benefits: • Accepts both plastic and/or wire collated coil nails • Lightweight Magnesium assembly • Tool-Free Depth-of-Drive adjustment • Tool-Free exhaust adjustment • Over-molded grip for comfortable use • Heavy Duty blow-molded case • Storage for No Mar Tip on the tool Plastic Collated Coil Wire Collated Coil Specifications: Applications: Fastener Length: 32mm to 64mm (15º angle coil nails) Fastener Diameter: 2.1mm to 2.5mm Total weight: 1.99kgs Driving Power: 500 inch/Ibs Power to Weight Ratio: 114 Operating Pressure: 70 to 120 PSI Magazine Capacity: 300 nails – Fencing – Decking – Timber-to-Light Gauge Steel applications Specialty Construction SB150SLBC-1 BOSTITCH BUTTON CAP STAPLER 19mm-38mm Features and Benefits: • Increases productivity when installing sisalation & insulation • Fast, easy loading of caps & staples • Flip-open nose for one-step jam clearing • Lightweight, durable Aluminium housing • Uses 8mm Crown (5/16”) SL Staples • Tool free adjustable exhaust • Kit includes heavy duty carry case, tool oil, hex key and 1,000 caps Specifications: Fastener Range: 19mm to 38mm Tool Weight: 2.14kgs Driving Power: 300 inch pounds Power to Weight Ratio: 64 Magazine Capacity: 160 staples & 100 caps Operating Pressure: 70 to 120 PSI Bulk pack of Staples and Caps also available! Item Code: CAPPAK1 Specialty Construction MIIIFS SECRET FLOORING STAPLER 32mm-50mm, 15ga-16ga Features and Benefits: • The Original and the Best! • 15ga & 16ga flooring stapler with Aluminium housing • High speed mallet actuated pneumatic operation • Extra-Wide base plates included for 12mm and 20mm Hardwood flooring • New Graphite Mallet included! NOW WITH NEW GRAPHITE MALLET AND EXTRA WIDE FOOT KIT New 15.5ga Handy 1,000 Packs now available! Item Codes: BCS1512-1M and BCS1514-1M Specifications: Fasteners: 15ga & 16ga Heavy Duty Staples Fastener Range: 32mm to 50mm Tool weight: 5.08kgs Driving Power: 420 Magazine Capacity: 92 Operating Pressure: 70 to 100 PSI CORRUGATED FASTENER TOOL 9mm, 12mm & 15mm Features and Benefits: • Easy fastener set lets you change fastener lengths with the push of a button • Drives 25mm wide corrugated fasteners at 9mm, 12mm and 15mm lengths • Precision balanced for reduced re-coil • Ergonomically designed with the consumer in mind • Over-molded comfort grip for maximum tool control Specifications: Applications: Tool Weight: 2.85kgs Magazine Capacity: 108 Fastener Length: 9mm to 15mm Driving Power: 433 inch/Ibs Power to Weight Ratio: 69 Fasteners: CF375-2000 and CF500-1750 Operating Pressure: 70 to 120 PSI – Cabinet frames – Pallet repair – Crates, Gates and specialty pallets – Truss construction – Stud-to-Stud connections – Furniture Butt Joints – Door and Window frames Specialty Construction CF15-2 Specialty Construction HP118K 23ga HEADLESS PINNER KIT 12mm, 19mm & 25mm Features and Benefits: • Adjustable high/low power switch for depth control and longer tool life • Over-molded comfort grip • Ultra quiet rear exhaust directs air away from the user • Side load magazine that houses 200 pins • Kit includes 500 each of the 12mm, 19mm and 25mm length 23ga pins • Lightweight, durable aluminium housing with rugged Bostitch industrial design Specifications: Applications: Tool Weight: 1.90kgs Magazine Capacity: 200 Fastener Length: 12mm, 19mm and 25mm Fasteners: 23ga Micro-pins Operating Pressure: 70 to 120 PSI – Delicate finish & trim or glue up assembly – Fine moldings – Woodworking HEAVY DUTY BCS2 SERIES STAPLER 12mm-38mm Features and Benefits: • Patented jam-free magazine • Power control valve adjusts power by 30% • Aggressive wear guards and skid resistant pads • Carbide inserts in tip for long tool life • Molded rubber comfort grip Specifications: Applications: Tool Weight: 2.13kgs Driving Power: 230 inch/Ibs Power to Weight: 49 Fasteners: 16ga (S2 Series) Staples Fastener Length: 12mm to 38mm Magazine Capacity: 160 staples Operating Pressure: 70 to 120 PSI – Lattice & Trellis – House Wrap – Timber-to-Light Gauge Steel applications Specialty Construction 438S2R-1 Specialty Construction BOSTITCHPAK-2 BOSTITCH DECKING COMBO PACK Kit includes: • F33PT Framing Nailer • 75mm x 3.06mm Paper Tape Framing Nails (3,000 pack) • N75C-1 Coil Nailer • Dome Head Decking Nails SS Ring Shank • 2.0hp Bostitch Air Compressor complete with 8m hose & fittings Kit includes: • F33PT Framing Nailer • N75C-1 Coil Nailer • Dome Head Decking Nails SS Ring Shank • 2.0hp Bostitch Air Compressor complete with 8m hose & fittings • 75mm x 3.06mm Paper Tape Framing Nails (3,000 pack) Specialty Construction BOSTITCHPAK-3 BOSTITCH CONSTRUCTION PACK Kit includes: • F33PT Framing Nailer • FN16250K-2 16ga Oil-Free C Bradder • 38mm C Brads • 75mm x 3.06mm Paper Tape Framing Nails (3,000 pack) • 2.0hp Bostitch Air Compressor complete with 8m hose & fittings Kit includes: • F33PT Framing Nailer • 38mm C Brads • FN16250K-2 C-Bradder • 2.0hp Bostitch Air Compressor complete with 8m hose & fittings • 75mm x 3.06mm Paper Tape Framing Nails (3,000 pack) Pallet and Crate N89C-1 PALLET COIL NAILER 50mm - 89mm, Serrated Tip Features and Benefits: • Heavy Duty Industrial Coil Nailer • Magnesium housing • Steel guards with anti-skid rubber inserts • Adjustable exhaist with steel backer plate • Patented Push-Button depth of drive adjustment • Serrated Tip version! Wire Collated Coil Serrated Tip Specifications: 1,050 inch/Ibs driving power Fastener Length: 50mm to 89mm Fastener Diameter: 2.50mm to 3.75mm 15º Angle Wire Collated Coil Nails Tool Weight: 3.7kgs Magazine Capacity: 225-300 Power to Weight Ratio: 129 Operating Pressure: 70-120 PSI Serrated Tip inlcuded Pallet and Crate N89C-1P COIL NAILER 50mm - 89mm, Plain (Smooth) Tip Features and Benefits: • Heavy Duty Industrial Coil Nailer • Magnesium housing • Steel guards with anti-skid rubber inserts • Adjustable exhaist with steel backer plate • Patented Push-Button depth of drive adjustment • New Bostitch Smart Trigger™ • Plain (smooth) Tip version! Wire Collated Coil Plain Tip Specifications: 1,050 inch/Ibs driving power Fastener Length: 50mm to 89mm Fastener Diameter: 2.50mm to 3.75mm 15º Angle Wire Collated Coil Nails Tool Weight: 3.7kgs Magazine Capacity: 225-300 Operating Pressure: 70-120 PSI Power to Weight Ratio: 130 Pallet and Crate N71C-1 PALLET COIL NAILER 38mm - 70mm Features and Benefits: • Durable cast Aluminium frame and cap • Fast, dependable engine design • New canister design fully opens, making re-loading faster there is no bottom lip to catch nail points • Durable fixed front exhaust Wire Collated Coil Specifications: 757 inch/Ibs driving power Fastener Length: 38mm to70mm 15º Angle Wire Collated Coil Nails Tool Weight: 5.8kgs Power to Weight Ratio: 96 Operating Pressure: 70 to 120 PSI Pallet and Crate N80CB-1ML INDUSTRIAL COIL NAILER 38mm-83mm Features and Benefits: • Aluminium housing for job site durability • Magazine canisiter holds up to 300 nails for high production applications • Quick-open composite canister survives falls • Rubber grip for added comfort • Aggressive toe-nailing teeth grip timber for slip-free nailing • Adjustable deflector conveniently directs exhaust away from the user Wire Collated Coil Specifications: Applications: Fastener Length: 38mm to 83mm Accepts 15º angled wire collated coil nails Tool weight: 3.81kgs Driving Power: 880 inch/Ibs Power to Weight Ratio: 105 Operating Pressure: 70 to 120 PSI Magazine Capacity: 300 nails – – – – – – Pallets and Crates Sheathing Strapping Fencing Exterior Decks Bridging Pallet and Crate N400C-1 HIGH-POWER COIL NAILER 57mm-100mm Features and Benefits: • Heavy Duty Industrial Coil Nailer • Aluminium Housing • Steel Wear guards • Fixed front exhaust • Secondary handle & Protective Shroud Wire Collated Coil Specifications: Applications: 1,450 inch/Ibs driving power Fastener Length: 57mm to 100mm 15º Angle Wire Collated Coil Nails Fastener Diameter: 2.50mm to 3.80mm Tool Weight: 6.3kgs Operating Pressure: 70 to 120 PSI – – – – – – Pallets and Crates Sheathing Strapping Fencing Exterior Decks Bridging POWERSLAM POWERCROWN HAMMER TACKER Features and Benefits: • Long reach Knuckle-Saver™ handle • Die-cast frame and hardened components for extreme durability • High capacity bottom load magazine • Jam-Free design • Extra-wide foot plate • Uses Bostitch PowerCrown staples - 6mm, 10mm & 12mm Specifications: Applications: Tool Weight: 0.99kgs – Roofing – Insulation – Sisaltion Manual Fastening PC2K Manual Fastening PC4000ML HEAVY DUTY POWERCROWN TACKER Features and Benefits: • All steel construction • Patented, easy squeeze design • Quick-load magazine • Jam-Free design • Integrated pusher spring - no loose parts • Ergonomically designed comfort grip • Double wall nose plate construction for extra durability Specifications: Applications: Tool Weight: 1.00kgs Magazine Capacity: 85 staples Fastener Range: 6mm-14mm Uses Bostitch PowerCrown (STCR5019) Series Staples – – – – – Carpet Underlay Mesh Insulation Sisalation Moisture wraps Upholstery POWERCROWN HAMMER TACKER Features and Benefits: • Quick-load magazine • Clear staple jams without the use of tools • Powerful, compact design • Jam-Free design Specifications: Applications: Tool Weight: 0.82kgs Magazine Capacity: 85 staples Fastener Range: 6mm-14mm Uses Bostitch PowerCrown (STCR5019) Series Staples – – – – Insulation Plastic sheeting Roofing paper Moisture wrap Manual Fastening H30-8 Manual Fastening P6C-8 HEAVY DUTY POWERCROWN PLIER STAPLER Features and Benefits: • Case hardened steel components for extreme durability • Ergonomically designed and patented easy squeeze bearing system • Top loading Specifications: Applications: Tool Weight: 0.45kgs Magazine Capacity: 85 staples Fastener Range: 6mm-14mm Throat Size: 63.5mm Uses Bostitch PowerCrown (STCR5019) Series Staples – – – – Packing & parcels Corrugated paper Plastic Canvas HEAVY DUTY POWERCROWN PLIER STAPLER Features and Benefits: • Bearing system allows an easy squeeze action across entire operting sequence creating a quicker, tighter clinch with less strain • P-Pointed blade version to penetrate cartons to clinch staple • Coated top load magazine permits faster, smoother staple loading P-POINTED BLADE TO PENETRATE CARTONS AND CLINCH THE STAPLE Specifications: Applications: Tool Weight: 0.45kgs Magazine Capacity: 85 staples Fastener Range: 6mm-9mm Throat Size: 9mm 63.5mm Uses Bostitch PowerCrown (STCR5019) Series Staples – – – – Header cards to plastic bags Box closing Corrugated assembly Dry Cleaning Manual Fastening P6C-8P Manual Fastening P3-CHROME HEAVY DUTY - LIGHT WIRE STAPLING PLIER Features and Benefits: • Case hardened steel components for extreme durability • Ergonomically designed for ease of use • Jam-Free design for maximum productivity • Quick-load magazine Specifications: Applications: Tool Weight: 0.23kgs Magazine Capacity: 85 staples Fastener Range: 6mm (1/4”) Throat Size: 63.5mm Uses Bostitch SP19 - 1/4” Staples Colour: Chrome – – – – Packing & parcels Corrugated paper Plastic Canvas 71 SERIES UPHOLSTERY TACKER Features and Benefits: • Lightweight, well-balanced housing • Dual action magazine release • Moulded rubber grip for added comfort • Anti-Jam magazine • Rear exhaust • Noise muffler • Low air consumption • Durable for both indoor and outdoor use Specifications: Applications: Tool Weight: 0.85kgs Driving Power: 42-52 inch/Ibs Magazine Capacity: 196 staples Fastener Range: 6mm to 14mm Operating Pressure: 70 to 100 PSI – Securing fabric to wood frame – Pre-upholstery spring up operation attach cardboard, webbing and propex to the frame Furniture TU-216-71 Furniture TU-216-71A 71 SERIES AUTO-FIRE UPHOLSTERY TACKER Features and Benefits: • Lightweight, well-balanced housing • Dual action magazine release • Moulded rubber grip for added comfort • Anti-Jam magazine • Rear exhaust • Noise muffler • Low air consumption • Durable for both indoor and outdoor use • 2 Function trigger - light squeeze for single fire mode. Full squeeze for auto fire mode • Allows adjustment from 0 to 30 staples per second • A Trigger-Free Play adjustment enables fine tuning of the trigger’s position AUTO FIRE VERSION Specifications: Applications: Tool Weight: 0.87kgs Driving Power: 42-52 inch/Ibs Magazine Capacity: 196 staples Fastener Range: 6mm to 14mm Operating Pressure: 70 to 100 PSI – Securing fabric to wood frame – Pre-upholstery spring up operation attach cardboard, webbing and propex to the frame 80 SERIES UPHOLSTERY TACKER Features and Benefits: • Lightweight, well-balanced housing • Dual action magazine release • Moulded rubber grip for added comfort • Anti-Jam magazine • Rear exhaust • Noise muffler • Low air consumption • Durable for both indoor and outdoor use • Use Bostitch 80 Series Staples. Also available in Stainless Steel. Specifications: Applications: Tool Weight: 0.85kgs Driving Power: 42-52 inch/Ibs Magazine Capacity: 196 staples Fastener Range: 6mm to 14mm Operating Pressure: 70 to 100 PSI – Securing fabric to wood frame – Pre-upholstery spring up operation attach cardboard, webbing and propex to the frame – Ideal for boat seats use Stainless Steel staples Furniture TU-216-80
