Tel: 01473 832223

Drill Masters
DRILLING SAWING CHASING GRINDING
CONCRETE REPAIRS JOINT CUTTING AND SEALING
Tel: 01473 832223
Range of Services
Diamond Drilling up to
650mm diameter
Floor sawing to depth
of 520mm
Wall Sawing to
depth of 500mm
Ringsawing to depth
of 270mm
Drill Masters provides the following Diamond Drilling and Concrete Cutting services:Diamond Drilling
Floor Sawing
Wall Sawing
Core Samples
Wall/Floor Chasing
New Opening
Bursting and Crunching
Fixings
Diamond Grinding
Joint Sealing
Structural Repairs
Up to 6500mm dia to depth of 2M in concrete and asphalt
To depth of 520mm in reinforced concrete and asphalt
Up to 50mm thick
Materials tested to latest standards
Cables for security and electrical installation
For lifts, doors, conveyors and elevators
Removal of concrete in confined or sensitive areas
Installation of dowels, holding down bolts, starter bars and hand
rails
Floors cleaned, ground and polished
Cutting and Mastic sealing
Resin Injection, Cementitous and epoxy repairs
www.drillmasters.co.uk
Exceeding Customer Expectations
We are focused on obtaining repeat business by
exceeding our customers expectations by:



Having highly qualified staff who care
We are committed to excellence in Health and
Safety and safe method of our operations
Being a Constructionline and CHAS approved
contractor
Continual communication throughout the project
to understand the larger project picture



Being polite and prompt ALWAYS and ensuring we
work efficiently and tidily
Making sure each customer is 100% satisfied with
our work upon completion

Public Liability Insurance £5,000,000

Employer Liability Insurance £10,000,000
www.drillmasters.co.uk
New Drillers
Wayne Youngs
Wayne, 28 joined in 2012 from the roofing and cladding
industry. He holds a full CSCS card and is in his second
year of the NVQII in Drilling and Sawing. Away from
work he likes spending time with his family and playing
FIFA on the PS3.
Blaine Burgess
Blaine is 26 and joined in May 2013 from a bricklayer contractor where he was a labourer. He holds
a full CSCS card and will start his NVQII in Jan 2014.
He enjoys playing football on a Saturday and
beating Wayne at FIFA
Recent Projects
A summary of some of the drilling and cutting works we have undertaken
Suffolk Highways, Hartest—Diamond drill holes for retaining bolts
Lagan Construction, Gt Blakenham—Diamond drill holes for steel frame at Energy For
Waste development
Galliford Try, Ipswich—Floor sawing concrete slab on Anglian Water site
Morgan Sindall, Cambridge—Diamond drill holes for student
accommodation block refurbishment.
Mixbrow, Colchester—Floor Sawing in food production warehouse
Skola School, Bawdsey —Hydraulic Ringsawing 2.2M x 2.2M opening
through 400mm RC wall to create infinity view.
A Selection of Our Customers
Customer Testimonials Drill Masters are safe, efficient, reliable, proactive with best solution
discussions and competitive on price. We would certainly use them
again—Jeff Townsend, Project Manager, Graham Construction
Drill Masters have always provided a fast and reliable service. Their
operatives are experienced and well equipped to deal with all onsite
queries and problems. This is backed up by their attentive and helpful
office staff. I wouldn't hesitate to recommend them for all of your
diamond drilling, sawing and cutting needs—Gareth Godfrey, Godfrey
& Hicks Builders Ltd
From concept to completion the legalities, equipment and
manpower was of the best standards. With no hesitation, I
would reuse their services and recommend Drill Masters to
others within the industry—Joe Sarrou, Workplace UK Ltd
Drill Masters Ltd
Limekiln House, 147a Paper Mill Lane, Bramford,
Ipswich, IP8 4BY Tel: 01473 832223 Fax: 01473 831790
Email: [email protected]