Leap Work Lounge Chair User Guide

Transcription

Leap Work Lounge Chair User Guide
Upholstery Care
In keeping with the tradition of finely tailored furniture,
the Leap WorkLounge Ottoman is upholstered in high
quality leathers and fabrics.
To give you the highest degree of comfort and touch,
leathers have been treated with only a slight surface
protection so they may darken if exposed to oil or grease.
If leather becomes damp, allow it to air dry away from
any heat source. Direct sunlight may cause fading.
For fabrics, regular use of a vacuum cleaner and
periodic professional dry cleaning is recommended.
Do not steam clean.
Polished Aluminum Care
The Leap WorkLounge Ottoman features lightweight
die-cast aluminum that is buffed to a lustrous sheen. To
keep it clean, simply hand rub with a soft, dry cloth. Over
time, the aluminum will develop its own natural patina.
Part #: LP-00054 ©2002 Steelcase Inc. All rights reserved. All specifications subject to change without notice. Printed in U.S.A. on recycled paper E
800.333.9939
steelcase.com
LEAP WORK LOUNGE
OTTOMAN
The Leap WorkLounge™ Ottoman/Table
®
Adjustment
The unique Leap WorkLounge Ottoman gives you a place
to put your feet up... or even a place to seat your guests.
And with a simple pull of a lever, it becomes a work
or side table for light duty office work. So you can
change from feet-up to writing mode instantly.
Order it as a companion to Leap WorkLounge
or as a complement to any chair.
(a)
Simply pull the lever (a) toward you to disengage the lock,
allowing the surface to be tilted up or down. Release the
lever to re-engage the lock.
Features
• Cushioned footrest surface
• Tilt-up work table 16"w x 14"d x 25"h
• Matching Leap WorkLounge chair
may be ordered separately.
CAUTION
Do not sit on worktable in upright position,
this may result in personal injury.
Upholstery Care
In keeping with the tradition of finely tailored furniture,
the Leap WorkLounge is upholstered in high quality
leathers and fabrics.
To give you the highest degree of comfort and touch,
leathers have been treated with only a slight surface
protection so they may darken if exposed to oil or grease.
If leather becomes damp, allow it to air dry away from
any heat source. Direct sunlight may cause fading.
For fabrics, regular use of a vacuum cleaner and
periodic professional dry cleaning is recommended.
Do not steam clean.
Polished Aluminum Care
The Leap WorkLounge features lightweight die-cast
aluminum that is buffed to a lustrous sheen. To keep it
clean, simply hand rub with a soft, dry cloth. Over time,
the aluminum will develop its own natural patina.
LEAP WORK LOUNGE
Part #: LP-00052 ©2002 Steelcase Inc. All rights reserved. All specifications subject to change without notice. Printed in U.S.A. on recycled paper E
800.333.9939
steelcase.com
Recline, Unwind, Create
How to adjust the Leap WorkLounge
to fit you
Congratulations on choosing Leap® WorkLounge™, the
beautifully crafted, first-ever, working lounge chair.
Shift positions. Recline deeply, or sit up straight and
work at the Ottoman/Table. The luxurious Leap
WorkLounge, with its patented Leap technology,
Upper Back Force
Turn knob forward
(clockwise) to increase
resistance.
will support your back in a wide range
of healthy positions.
Back Stop
Set recline angle
by rotating paddle to
any of the 5 positions.
Seat Height
Lift paddle to raise or
lower seat height.
Features
•
•
•
•
Extra-cushioned seat and deeper recline
Large headrest with flip-up pillow
Leap’s Live Back™ and Natural Glide System™
Standard with glides, optional with casters: hard wheels
for use on carpet, soft wheels for use on hard floors
• Matching Ottoman can be ordered separately
Lower Back Firmness
Turn knob forward
(clockwise) to increase
firmness.

Similar documents