TRV 1200L TRV 1600L
Transcription
TRV 1200L TRV 1600L
Esempio di installazione con multilame TRV 1200L - TRV 1600L.1 EN Esempio di installazione con multilame Example of installation with multi-rip saw CROSS-CUT SAWS – OPTIMIZING SYSTEMS – LOAD/UNLOAD TRONCATRICI - OTTIMIZZATRICI - AUTOMAZIONI CARICO/SCARICO AUTOMATIONS Standard technical data Model Power Blade Working height surface Dust outlet Ø Compressed air consumption Average noise level on operator Max. forward speed Cutting height on the guide (KW) mm. mm. mm. nl/min. DBA mt./min. H mm. TRV 1200L 550 4 Ø 500 Ø 35 Z/120 900 ±20 140 + 100 320 < 80 5 ÷50 variable 70 TRV 1600L 700 11 Ø 700 Ø 40 Z/80 950 ±20 5 ÷50 variable 95 TRV 1200L Ø550 Cross-cut saws - Automations 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 DESCRIZIONE DISEGNO: SCHEMA SEZIONE DI TAGLIO CODICE DISEGNO: 637013 520 < 80 CURSAL srl Via Bradolini, 38-A – 31020 SAN FIOR (TV) italia Tel +390438400963 Fax +390438401851 [email protected] www.cursal.com TRV 1600L lama - blade Ø 700 CURSAL srl Via Bradolini, 38-A – 31020 SAN FIOR (TV) italia Tel +390438400963 Fax +390438401851 [email protected] www.cursal.com 200 175 150 125 100 75 50 25 LAMA Ø 550 Cross-cutting solutions for the solid wood industry 140 + 100 TRV 1600L Ø700 Cross-cutting solutions for the solid wood industry TRV 1200L lama - blade Ø 550 TRONCATRICE SERIE: TRV 1200L Cross-cut saws - Automations 225 200 175 150 125 100 75 50 25 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600 Disegno protetto a norma di legge. Ogni riproduzione e utilizzo deve essere autorizzata da nostra dichiarazione scritta. Cursal si riserva il diritto di apportare modifiche alle dimensioni e alle caratteristiche tecniche senza preavviso TRONCATRICE SERIE: TRV 1600L LAMA Ø 700 DESCRIZIONE DISEGNO: SCHEMA SEZIONE DI TAGLIO CODICE DISEGNO: 648013 Disegno protetto a norma di legge. Ogni riproduzione e utilizzo deve essere autorizzata da nostra dichiarazione scritta. Cursal si riserva il diritto di apportare modifiche alle dimensioni e alle caratteristiche tecniche senza preavviso The manufacturer reserves the right to make changes without prior notice. This brochure cancels and replaces the previous ones Optimizing cross-cutting saws and plants - www.cursal.com CROSS-CUT SAWS automaTIONS SPECIAL CROSS-CUT SAW series TRV 1200L TRSI TRV 1600L For LATERAL STRIPS FROM MULTI-RIP SAW • SLABS FROM BAND SAW • FIREWOOD • TRONCATRICI - OTTIMIZZATRICI - AUTOMAZIONI CARICO/SCARICO INGG TTIN T T U U SS-CC S CRO UTIONlid SOL he so stry t u for od ind wo Agent www.cursal.com - [email protected] Cursal s.r.l. via Bradolini, 38/a - 31020 San Fior (TV) Italy tel. +39 0438 400963 - fax +39 0438 401851 In solid wood field, the massive quantity of lateral waste strips from the multi rip saw or slabs from the band saw become a problem: normally they need to be stacked, transported and stored. Cursal since a lot of years has been developing a range of dedicated crosscut saws to be placed in line with other machineries. They are suitable for cutting to size the wastes of the production, automatically discharging them in boxes or sending them to the grinder. Theese professional lines are studied for resisting to extreme treatment: > pieces can be loaded “by fall down” without damaging the belt conveyors. >pieces can be loaded overlapping randomly without paying attention (a normal cutting system would stop working immediately in the described conditions). The high speed of this machine allows application in companies principally engaged in the production of firewood. It is available in 3 sizes with blades Ø500 to Ø700 mm. Safety standards for the entire range of the TRV 1200L – TRV 1600L • Wooden strips and wastes are loaded randomly on a low wear belt conveyor, damped on the bottom side, to avoid damaged caused by the sharp edges of the wastes • A system of clamps, which work independently, allow to process overlapped pieces different in thickness and shape a) Access door to parts in motion, that is protected by safety micro switch with forced opening. Unique lead covered key, that cannot be copied on the market b) Protection tunnel equipped with safety microswitch with lead covered key, against forced removal c) Blade motor with rapid shutdown (less than 10 sec.) d) Thick casing to protect the blade for total blocking any splinters e) Drop air lubricator. Keeps the oil from nebulizing in breathable air.