TRSI
Transcription
TRSI
MD.1 TRSI_10 EN Cross-cut saws – Automations Push feed cross-cut saws series TRSI AP-OL-E • Cursal introduces the | MONOBLOCK INCORPORATED PUSHER Equipped with a compact structure that makes the installaon rapid and simple without the need of on-site intervenon of the installers C 512 Push-feed system: strategical choice Depending on your needs, the TRSI can be provided for -FIXED LENGTH CUTTING -OPTIMIZATION and it can be used in several fields | PACKAGING cung to size for single plank or in packages, also perfect for cung squares | DOORS/WINDOWS opmizing and selecng qualies and defects | FURNITURE the precision allows it to cut semi-finished with finished cung C 519 Features • AUTOMATIC, CHEAP, SIMPLE AND INTUITIVE TECHNOLOGY, (it does not need of skilled staff) • High quality of materials and normalized components • Complete soware 100% made in Cursal, interface with any PC, via standard network, USB and modem • Specific safety measures THE RANGE OF CURSAL PROFESSIONAL PUSH FEED CROSS-CUT SAWS ARE THE SOLUTION TO INCREASE PRODUCTION FACTORY, GREATLY REDUCING TIMES AND COSTS • Modular accessories • Possibility of exclusive customisaon for dedicated producons Pushers next generation Cursal.com CURSAL | SERIES TRSI CURSAL | SERIES TRSI • Ergonomic parts with rounded edges • The rapid movement of the pusher takes place on (even internally for maintenance) re-circulang ball steel guide with sliding double carriage by means of brushless motors SERIES TRSI AP l OL l E versions for an universal use CUTTING OF SINGLE PLANKS AND PACKAGES INCREASED STRENGTH = MORE PRECISE SLIDING a SOLID CUTTING UNIT TO HANDLE PACKAGES AND MOULDINGS WITH MAXIMUM SPEED AND PRECISION h f • Robust aligner with incorporated and silenced blower • Pneumac clamp with movement on re-circulang ball linear carriages and guides d C 521 • TRSI uses the same line of industrial NC, which is used for Cursal opmizing cross-cut saws, top of the range b b g e c PERFECT 90° CUTS • Mulple dampened rubberised wheels and wet-type clutch to avoid skidding MECHANICAL PROTECTION BY OPTICAL BARRIERS CLASS 2 C 521-B C 513 WIDE RANGE OF ACCESSORIES TO EQUIP THE TRSI DEPENDING ON EMPLOYMENT FIELD a b SAFETY STANDARDS FOR THE ENTIRE RANGE OF THE TRSI Cursal provides greater security to company! a Total protecon air lubricator. Keeps the oil from nebulizing in e Drop breathable air door to parts in moon, that is protected b Access by safety micro switch with forced opening c Cylinders with rubber sineblok to reduce noise f Safety limit switch that protects the total opening pipe at the rear of the machine that does g Exhaust not allow the access to the blade h Total protecon panel steel d Motor blade with quick shutdown (less than 10 sec.) Employment fields Cross-cut saws series TRSI max 6000 FIXED CUTTING LENGTH a: TRSI E opmizing cross-cut saw version used for selecon of qualies and defects b: TRSI AP fixed length cung with non-stop loading by vacuum system (Cursal Automaons) TURBO RANDOM LENGTH CUTTING FULL OPTIMIZATION AP OL E Packaging (from squares to small planks) Semi-finished for furniture Semi-finished with finished cutting Structures and external decorations Dedicated specific productions Max. precision production Window and door frames, skirting, frames, construction Laminated panels, blockboard, structures Cursal software features: FIXED LENGTH CUTTING for cutting to size of single planks or packages without defect removal FIXED LENGTH CUTTING PROCESSING TYPE Full optimization Random length cutting PLANKS SECTION Fixed length cutting TRSI TRSI AP Defect removal X X X 3000 3000 Initial Tavolaplank iniziale 725 725 725 725 Misure costanti di taglio Fixed cutting measures 1200 300 700 300 400 Measures sequence OPTIMIZED CUT Complete software for a full optimization, for the optimal use of the resource timber PROCESSING TYPE Full optimisation Random length cutting OPTIMIZED CUT TRSI OL X TRSI E PLANKS SECTION Fixed length cutting X X X X Defect removal X X X X X OL Random length cutting. The pusher during the over elevated return on planks, reads the length of the single plank or package and transmits the data to the NC which processes (according to the cutting list) the best solution in real time without waiting E Full optimization. Each plank is coded - by chalk marking - and cut-off according to the data set out on the selected page 1-9 1/5 qualities with operator’s marking Up to 45 working pages in-line 1/9 widths worked simultaneously, with different destinations Printer handling, for marking codes on semi-finished Recoveries for finger-joint with different qualities Different optimization priorities • Price priority • Waste priority • Quantity priority • Length priority • Mixed Recoveries • Recoveries on previous and following piece • Waste recovery for semi-finished of low quality • Corrective size in case of incorrect marking Wastes • Programming of head and tail wastes • Centering of the semi-finished between wastes • Waste fragmentation • Cutting order change if wastes are not respected Power Blade Working height surface Ø Dust outlet Compressed air consumption Average noise level on operator Max. forward speed (KW) mm. mm. mm. nl/min DBA mt./min. sec. H mm. 3/4/5,5 Ø 500 Ø 35 Z/120 900 ±20 150 < 80 100 ÷ 250 0,5 ÷ 1,5 140 Standard technical data of the TRSI 120 + 80 Cutting time Cutting height on the guide The reported data may vary depending on the customisaons required Ejector series E60 (opt.) Full set of accessories in charge - discharge Ink-printer (opt.) Loaders-unloaders (opt.) Buffer by chains (opt.) C 486-G C 486-U NC rapid ejector (2/100 of sec.) Contact-less ejector for small pieces Water-based printer (or label printer) for the classificaon of sized pieces C 522 Feeder by vacuum system for loading single plank with the creaon of the package C 521-C Horizontal buffer by chains with singularizaon device, usable for both single planks and packages TRSI Ø500 200 175 150 125 100 75 50 25 THE BASIC CROSS-CUT SAW SERIES TRSI, COMES WITH LOADING SUPPORT BRACKETS AND AN UNLOADING SURFACE, BUT IT CAN BE EQUIPPED WITH ALL THE ACCESSORIES THAT CURSAL PRODUCES FOR SAWS LIKE: - SOFTWARE FOR INTEGRATED MANAGEMENT WITH CUSTOMERS’ SYSTEMS WITHOUT ADDITIONAL INTERFACES - INTERNET ON-LINE SERVICE, ETC... 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 The manufacturer reserves the right to make changes without prior noce. This brochure cancels and replaces the previous ones. Cursal s.r.l. via Bradolini, 38/a 31020 San Fior (TV) Italy tel. +39 0438 400963 - fax +39 0438 401851 www.cursal.com - [email protected] Dealer