Available Fall 2016 - Greater New Bedford Regional Vocational

Transcription

Greater New Bedford Voc-Tech High School
Evening Adult Education
Spring
2016
Registration Dates
Monday, Feb. 29
Tuesday, March 1
Wednesday, March 2
Monday, March. 7
Tuesday, March. 8
Wednesday, March. 9
♦
♦
♦
♦
♦
♦
5:00 - 8:00 p.m.
5:00 - 8:00 p.m.
5:00 - 8:00 p.m.
5:00 - 8:00 p.m.
5:00 - 8:00 p.m.
5:00 - 8:00 p.m.
NO LATE REGISTRATION
(DOES NOT APPLY TO LIC. RENEWAL CLASSES
Classes Begin the Week of March 28, 2016
We Serve the Community
VISIT OUR WEBSITE - WWW.GNBVT.EDU
1121 Ashley Boulevard
New Bedford, MA 02745
Telephone: 508-998-3321
Ext. 195
Fax: 508-998-4658
REGISTRATION INFORMATION
PROOF OF RESIDENCY REQUIRED
Qualified individuals with disabilities seeking
reasonable accommodations are requested to
contact the Director at the time of registration.
Classes operate on a Trimester System.
Hours of operation are 6:30-9:30 p.m. Unless
otherwise noted in Brochure
Monday through Thursday. All classes run for
8 weeks unless otherwise stated.
Registration is open to all, regardless of where
they reside.
Individuals may register for as many classes
as they desire.
Tuition will be returned if:
It is impossible to conduct a course or the
student decides to drop out of a planned
course before it begins.
NO REFUND ONCE THE COURSE HAS
STARTED.
Senior Citizens (60 or over) will receive a
$10.00 discount for all 8 week classes and
a $5.00 discount for 4 week and seminar
classes.
A school calendar that indicates holidays and
vacation periods will be distributed at the
beginning of each session.
Students must be 18 or older. Any exceptions
to this rule, must be approved by the Director.
All students will be informed of the fire drill
procedures.
GENERAL INFORMATION
District price is for the residents of Dartmouth,
Fairhaven & New Bedford.
There is absolutely NO SMOKING anywhere on
campus.
Parking is allowed in the main parking lots or
designated shop areas. Automobiles which are
illegally parked will be tagged and brought to the
attention of the police.
Generally, whenever Greater New Bedford
Regional Vocational Technical High School day
school has been cancelled for inclement weather,
evening school classes will be cancelled. Please
call our snow cancellation line, 508-998-3321
ext. 444 or listen to radio stations WBSM, WNBH,
or WSAR for information. Make-up classes will be
scheduled at the discretion of the Director of Adult
Education.
At the conclusion of the Adult Education Program,
students will be given a certificate in their
respective programs if they have attended 75% of
the required class.
It is a school policy that no one is allowed into the
building or any of the classrooms at any time
unless you are an evening student.
C.E.U.’s and P.D.P.’s are available upon request
for some courses.
Only 1 discount allowed per person.
Payments accepted by cash, check, Visa,
MasterCard and Discover Card.
There will be a $5.00 Convenience
Fee for all credit card payments.
Make checks payable to: GNB Voc -Tech
Due to scheduling constraints, make-up classes and specific class dates
may be scheduled to a different evening at the discretion of the Instructor. Days missed
due to inclement weather will be made up if possible.
We Serve the Community
Now Offering
W
W
NE
NE
Introduction to CNC Page 9
Watercolor Painting, Drawing Page 11
Couponing Page 14
Bead Weaving Page 12
Gift Certificates
for Adult Education Courses make the
Accreditation Standards
 Chapter 74 Approved Vocational Technical Programs
 New England Association of Schools and Colleges (NEASC)
 Approved School by the MA Board of Building Regulations and Standards
 Approved School by the MA State Board of Electrical Examiners
 Approved School by Commonwealth of MA Division Professional Licensure for Plumbers & Gasfitters
 Approved training courses by the MA Division of Employment and Training and MA Rehabilitation
Commission, US Department of Veteran Affairs
 Approved School by Commonwealth of MA Steam Engineering License Renewal Provider
 Approved School by Commonwealth of MA - for Continuing Education for Building Official
Certification
 Approved OSHA Training Facility
 Member of Massachusetts Restaurant Association for NRA ServSafe® Certification
 Approved Program for EPA—Section 608 Certification and Universal R-410A
 Approved testing site of the ASPT (Certified EKG Technician Exam)
NON-DISCRIMINATION POLICY
Greater New Bedford Regional Vocational Technical High School does not discriminate on the basis of race,
disability, color, national origin, sex, religion, sexual orientation or age in its education programs and activities,
including admission to or employment in such programs or activities.
Greater New Bedford Regional Vocational Technical High School
1121 Ashley Boulevard, New Bedford, MA 02745 508-998-3321
Inquiries concerning the application of Title IX and its implementing regulations may be referred to the
Title IX coordinators or the U.S. Department of Education Office for Civil Rights.
COMPUTER/BUSINESS CLASSES
Course # DP-04
Night: Monday or Tuesday
Introduction to Computers
0
2
ll
Course # DP-07
16
Microsoft Word 2010
This course will introduce students to basic concepts of
a computer and its capabilities, as well as the Windows
environment. Students will learn how to customize
desktop settings, create shortcut icons, manage files
with Explorer, and work with applications.
a
F
le
b
ila
Night: Wednesday
a
v
A
*Book included in price.
District Price: $125.00*
Non District Price: $150.00*
This course will introduce students to Microsoft Word
and the word processing skills necessary to write letters
and reports, create flyers and newsletters, and improve
office skills. In the hands-on course, students will learn
how to create documents, format pages and text, create
tables, envelopes and labels, edit and proof documents,
and use the mail merge feature.
6
1
0
2
l
l
a
F
e
l
b or equivalent computer
Prerequisite: Windows
a
l
i
knowledge. a
v
DistrictA
Price: $150.00
Non District Price: $175.00
Course # DP-08
Night: Tuesday
Microsoft Excel 2010
This course will introduce students to Microsoft Excel.
Students will learn how to format data and use formulas.
Students will also learn how to design charts and how to
filter/sort data. Intermediate skills such as absolute
references, conditional formatting, and linking cells are
also introduced in this session. Students will master the
basics of Excel through hands on instruction.
Prerequisite: Windows or equivalent computer
knowledge.
District Price: $150.00
Course # DP-13
Night: Tuesday
Microsoft Office Mini-Course 2010
Learn the basics of Windows, Word, Excel, PowerPoint,
and Access. This class covers introductory topics and
concepts that will assist you in gaining an understanding
of the programs and their uses. Learn the basics or update
your knowledge of Microsoft Office earlier version to the
2010 release. This course offers teaching using
demonstration, tutelage, hands-on, and take home
materials. Work smarter, not harder!
Prerequisite: Basic knowledge of computers &
keyboarding skills
COMPUTER REPAIR
Course # PC-01
Night: Monday
PC Repair & Upgrade Secrets
Tired of having to pay someone else to repair and
upgrade your Windows PC? Learn how to do it
yourself!
This course covers:
Hardware verification
CMOS setup
BIOS upgrades
Emergency startup disks (using Linux OS)
Installing a new operating system (Windows
OS)
Installing memory (RAM upgrades)
Installing software (Anti-Virus, Multimedia,
Office, etc)
Safe mode and system restore
Virus and spyware removal
Password cracking and much more!
Prerequisite: Familiarity with basic hand tools,
computer keyboards and Microsoft Windows. Students
should be able to lift and carry 30 pounds.
*** Tuition includes a Dell tower computer, complete
with Windows license, mouse, keyboard, and LCD
monitor that’s yours to keep at the end of the course.
1
PHOTOGRAPHY/WEB DESIGN CLASSES
Course # DP-11
Night: Thursday
Course # DP-10
Night: Wednesday
Introduction to Digital Photography
Web Site Design
Learn basic digital camera operation, beginner level
image composition, flash and lighting concepts. Figure
out all those fine features your camera has. Find out
how to transfer your pictures to your computer, CD and
email. Discover introductory photo editing, cropping,
resizing, adding type, and an introduction to
PhotoShop.
Bring your camera to the first class!
This course will introduce HTML as well as popular
Web authoring software to create interactive Web sites.
Students will learn to plan and develop well-designed
Web sites that combine effective navigation with the
balanced use of graphics, text and color.
Course # DP-14
COMPUTER AIDED DRAFTING
Course # TD-02
Night: Monday
Advanced Web Site Design
This course is a continuation of Web Site Design.
Students will focus more on HTML code and advanced
design and web management skills.
Night: Monday
CAD (Computer Aided Drafting)
Auto CAD 2016
This beginners course offers the use of graphic-oriented
computer software for designing and drafting operations.
Prerequisite: Students should be familiar with
standard drafting grammar/procedures and have basic
computer knowledge.
Are you, or someone you know, interested in teaching a Craft or Trade here
at Greater New Bedford Voc-Tech as
part of our Adult Evening School
Program?
If so, please forward a letter of intent
with your qualifications or resume to:
Director of Adult Education
Greater New Bedford Regional
We now accept Visa, MasterCard
Voc-Tech High School
and Discover Card.
There will be a $5.00 Convenience Fee
for all credit card transactions
.
2
TRADE CERTIFICATIONS
LANGUAGES
Course # LG-02
Night: Tuesday
Course # CP-05
Conversational Spanish
Massachusetts Building Code
This introduction course in the Spanish language will
enable the student to speak, as well as understand,
common expressions.
This course will prepare students planning to take the
Construction Supervisor's licensing exam.
“Understanding the MA State Building Code” is B.B.R.S.
approved for 10 continuing education credits for certified
building officials.
Course # LG-03
Night: Monday
*Current Editions of MA Commercial Code, 1 & 2
Family Code, Int’l Building Code and Energy Codes are
included in the price.
**Tuition subject to change based on cost of textbooks.
Night: Tuesday
Advanced Conversational Spanish
This class is a continuation of the Beginner Class.
Course # CP-12A & CP-12B
Night: Tuesday
12-Hour MA Construction Supervisors
License Renewal
CP-12A will run the first four Tuesdays. (Mar. 29 - Apr.
26)
Course # LG-04
Night: Wednesday
CP-12B will run the last four Tuesdays. (May 3 - May
24)
Conversational Portuguese
This introduction course in the Portuguese language will
enable the student to speak, as well as understand,
common expressions.
Anyone holding a MA General Contractor’s License is
required to take 12 hours of continuing education for that
cycle. This course has been approved by the Massachusetts Board of Regulations and Standards for 12 hours of
continuing education requirements.
*Code books will be available for additional fees.
Non-District Price: $175.00
Course # LG-06
Night: Thursday
Advanced Conversational Portuguese
This class is a continuation of
the Beginner Class.
3
Course # CU-01
Day: Tuesday Afternoon
Course # OSHA-01
NRA—National Restaurant Association
Night: Friday & Saturday
10-Hour OSHA Construction and
®®
6
1
0
l2
ServSafe Certification*- 6 Sessions
Safety Course
15 hour Classroom Preparation followed by Exam
This 10 hour program is intended to provide a variety of
instruction on construction industry safety and health
standards to entry level workers.
GNB Voc-Tech OSHA Certified Trainers will provide
instruction.
Dates: TBD
al
F
le
b
ila
Time: 4:00 - 7:00 PM
*Price includes book, class and exam
a
Av
Course # IWT-01
Night: Tuesday
Industrial/Municipal Wastewater Training
This twelve week survey course will introduce the
student to the physical and chemical processes associated
with water quality, pollution, and treatment of liquid
wastes, as they pertain to Municipal and Industrial
Operations. The student will be exposed to the function
of related equipment and support systems and the
environmental responsibilities required to safely and
properly operate, maintain and manage a Wastewater
Treatment Facility. Topics covered include wastewater
flow, wastewater characteristics, collections systems,
regulations, mathematics, laboratory and various
treatment processes. The course will concentrate on
preparing the student to take a Massachusetts Industrial,
Municipal or Combined Wastewater Certification Exam
Grades 1-5.
STEAM ENGINEERING
6
1
0
2
l
l
a
F
le
b
ila
a
v
A
*Books available for additional fees.
LICENSE RENEWALS
Course # SE-06
Night: Monday
6 - Hour Special License Renewal
6
1
0
2
l
Individuals licensed to operate boilers under a special
license shall demonstrate completion of 6 hours of continuing education at or through an institution or organization approved by the commissioner, in consultation with
the chief inspector, during each 5-year period proceeding
each license renewal.
al
F
le
b
ila
a
Av
Course # SE-30
6
1
0
Night: Monday
Mandatory License Renewal - 30 hours
2
l
l
a
F
le
b
ila
All individuals licensed to operate boilers shall
demonstrate the completion of 30 hours of continuing
education before each license renewal.
a
Av
10 Weeks
4
PLUMBING
Course # PL-03, PL-04, PL-05
Course # PL-7
6:00 to 9.30 pm
IAPMO MA Licensed Plumbers & Gas
Fitters Session #6 License Renewal Course
248 CMR Tier Program for Licensure of Plumbers
PL-7C will run Mon. & Tue. March. 28 & 29
PL-7D will run Mon. & Tue. April 25 & 26
MA master plumbers and gas fitters, journeyman plumbers and
gasfitters, and LP installers are required by CMR 11.00 to
compete Session #6 prior to license renewal. This class will
utilize IAPMO course curriculum materials which include
Board updates, chimney and venting updates, appliance
installation requirements, tool and product news, related
industry issues, administrative topics, code compliant
installation methods, alternative plumbing technologies, and
business items that currently effect all licensees. Students need
to sign up for both courses and need their license number to
register.
Gas Fitters (3 Hours)
Plumbers (6 Hours)
$60
Night: Tue & Thu
6
1
0
l2
PL-03: Tier 3 program for the licensed apprentice
plumber. PL-01 and PL-02 or equivalent required.
Course consists of 110 class hours along with a final
exam. Licensees must pass tier 3 final exam before
continuing to PL-04. Minimum registration required for
course commencement.
al
F
le
b
la for the licensed apprentice
i
PL-04: Tier a
4 program
plumber. v
APL-01, PL-02 and PL-03 or equivalent
required. Course consists of 110 class hours along with a
final exam. Licensees must pass tier 4 final exam before
continuing to PL-05. Minimum registration required for
course commencement.
6
1
0
2
PL-05: Tier 5 program for the licensed apprentice
plumber or the Journeyman Plumber seeking to obtain a
master plumber license. PL-01, PL-02, PL-03, and PL04 or equivalent, or a Journeyman plumber license
required. Course consists of 110 class hours. Minimum
registration required for course commencement.
$100
ll
a
eF
l
b
ila
aPL-03, PL-04, and PL-05
v
A
District Price: $750
Non District Price: $850
PLUMBING
Course # PL-06:
Night: TUE & THU
Time: 6:30 to 9:30 PM
This class runs for 30 hours, 2 nights per week for 5 weeks
MA License test prep course for Journeyman and Master Plumber & Gas Fitter.
This course is an intense and comprehensive study course, designed to assist candidates in preparation for the
Massachusetts State Plumbing and Gas Fitting Journeyman and Master Plumbers Exam. The program curriculum is a compilation and series of extensive and challenging questions and answers that provides an overview
of the Commonwealth of Massachusetts Fuel Gas and Plumbing Code. Topics include in the series, formulas
needed to solve basic and complex math problems, installation practices, blueprint reading, the science of systems, water piping systems, storm drains and other related areas associated with the plumbing and gas fitting
trade.
THESE HOURS CANNOT BE USED TOWARD MASSACHUSETTS STATE REQUIRED HOURS
Non-District Price: $700
5
EKG TECHNICIAN
Course # EKG-01
OPHTHALMIC ASSISTANT
Nights: Tuesday & Thursday
10 weeks - 35 hour session
Course # OA-01
6:00 - 9:30 p.m.
Night: Monday
Learn to do eye exams!
The objective of this course is to gain experience as an
EKG technician using the following skills:
The Ophthalmic Medical Assistant Program is a
certificate program to help answer the need for qualified
assistants in ophthalmology practices.
Properly obtaining EKG including lead placement
Trouble shooting and artifacts
Heart Anatomy and Physiology
Diseases of the heart
Operating and adjusting of EKG monitors
Holter Monitors
Pacemaker Rhythms
Reading and Interpretation of EKG recordings
Communication with Physicians and Medical Staff
Loose fitting clothing a must
This program is designed to teach the basic skills needed
to perform eye exams and prepare the patient for the
ophthalmologist.
With a combination of classroom teaching and a
hands-on clinic in a local ophthalmology office
(Advanced Eye Center, 500 Faunce Corner Rd.) this
program is designed to give the student a basic
foundation of ophthalmic knowledge.
Bilingual ability is a plus in the medical field. Also, this
course does require some knowledge of basic algebra.
This course will prepare the student to take a Certified
EKG Technician Exam certified by the American Society
of Phlebotomy Technicians (for an additional fee).
Our students will have the mandatory 6 month work
requirement waived.
PHARMACY TECHNICIAN
Course # PT - 01
Night: Monday
This course runs 14 weeks.
This course will prepare participants for employment within both the clinical and retail pharmacy practice. Focus will
be placed on medical terminology, pharmaceutical calculations, inventory systems, and regulations affecting pharmacy
practice.
6
1
0
2
l
l
a
le toFsit for the PTCB (Pharmacy Technician Certification
b
Upon completion of this course, studentsa
will
be
prepared
a
l
i
v
Aprovide them with a CPHT (Certified Pharmacy Technician) license.
Board) exam which would
6
ELECTRICAL
Course # EL-01
Night: Monday or Wednesday
Course # EL-07
Night: Mon. & Wed.
Basic Electricity for the Homeowner
MCE MA Electrical License Renewal
The purpose of this course is to provide the student
with an understanding of basic home wiring.
Discussed are areas such as electrical terminology,
conductor size, cable types, splicing, Outlet boxes,
proper termination of receptacles, fixtures and panels.
Mandatory 15 Hr. Code Review for 2014 Electrical
Code Changes. (MA & RI Licenses only)
Session 2: Mar. 30, April 4, 6, 11, 13
Session 3: May 2, 4, 9, 11, 16
Based on 2014 Massachusetts and
National Electrical Code
*Price includes materials.
ELECTRICAL JOURNEYMAN/MASTER LICENSE PREPARATION
If you are an apprentice and want to become licensed as a Journeyman Electrician, then this is the course for you.
An apprentice is defined as one who is working and studying under the direct supervision of an appropriate licensed
individual. The MINIMUM qualifications are as follows: An apprentice must be supervised for 8,000 hours and such
supervision must be for a period of not less than 4 years. As well as 4 years of employment, and 8,000 hours as an
“apprentice” under the direct supervision of a licensed journeyman, you will need to SUCCESSFULLY complete 600
total hours (75 hours per module - 8 modules required) of this program.
016
2
l
l
a
F
le
Availab
Fall 2016 Part 1 (14 weeks)
Winter 2017 Part 2 (14 weeks)
Course
Hours
Course
Hours
EL-J-1A
0-75 HOURS
EL-J-1B
75-150 HOURS
EL-J-2A
150-225 HOURS
EL-J-3A
EL-J-4A
EL-M-A
le
b
a
l
i
vaHOURS
A450-525
300-375 HOURS
0-75 HOURS
6
01
2
l
l
Fa
EL-J-2B
225-300 HOURS
EL-J-3B
375-450 HOURS
EL-J-4B
525-600 HOURS
EL-M-B
75-150 HOURS
*Books are included in price.
Night: Tuesday and Thursday
Students will be offered 84 hours of instruction and must complete 75 hours for credit. Students will be
placed in class sections based on total classroom hours completed and approved by the Commonwealth
STUDENTS MUST TAKE MODUAL A BEFORE TAKING MODUAL B.
7
CARPENTRY
Course # CP-01
CARPENTRY
Night: Monday
Course # CP-04
Night: Monday or Tuesday
Basic Carpentry
Millwork
This course will introduce woodworking basics; specific
skills in measurement, layout, and the proper use of hand
tools. Students will be required to make a few small
projects with step-by-step procedures and instruction. The
basics are vital knowledge needed to better understand
more advanced woodworking techniques. Safety is
stressed throughout.
The use of power equipment and its safety makes up this
program. Students are required to do a project that
involves the use of circular saw, jointer, radial saw,
planer, shaper, and small power tools.
Prerequisite: CP-01 or previous carpentry training
Course # FW-01
Course # CP-07
Night: Thursday
Night: Tuesday
Fine Woodworking
Basic Carpentry II
Prerequisite: CP-01 or previous carpentry training
This course will continue with woodworking basics;
specific skills in light power tool equipment, basic joinery,
and cabinet basics. Students will be required to make a
few small projects with step-by-step procedures and
instruction. Knowledge gained will assist students in
furthering their skills in woodworking. Safety is stressed
throughout.
If you have some experience in woodworking and would
like to take the next step in creating a turn of the century
piece, take the challenge. This course includes complete
step by step instruction in creating a one of a kind piece
such as a Queen Anne step stool and true hand cut dovetail
blanket chest, using typical hand tools and modern
machined techniques.
Prerequisite: Basic Carpentry/previous carpentry
training
FURNITURE REFINISHING
Course # CP-03
Night: Tuesday
Course # PA-01
Night: Thursday
Residential Housing Technology
Furniture Refinishing Fundamentals
This course is designed for the future or present
homeowners that are contemplating building, renovating, or
repairing their own homes along with general home
maintenance. Classes will cover building terminology,
replacement windows, code requirements, and drawing
techniques to obtain a building permit. Shop instruction
will include use of hand and power tools, rafter and stair
layout using a framing square.
If you have a piece of furniture that needs a face lift, this is
the course to take. The first class will be an orientation to
evaluate piece, and an overview of different types of
finishes and solvents. Students are responsible for all
materials, solvents, and finishes needed. Reconstruction
is held to a minimum.
8
MACHINE TECHNOLOGY
Course # MA-01
MACHINE TECHNOLOGY
Night: Tuesday
Course # MA-03
NE
Night: Wednesday
Basic Machine Shop Training
Introduction to CNC
This course is a self-paced learning environment in which a
student can complete one or more projects in any one session.
Total progress per session will undoubtedly depend upon prior
experience and/or individual’s ability to perform the
operations as instructed.
This is a Basic CNC course. Students will learn the
codes of CNC language, basic programming and to
program parts using a HAAS simulator. Once parts
have been programmed students will learn basic setups and run a part in the HAAS machine.
Related Subjects—Measure and measurements, shop sketches
and blueprint reading, review related math, shop problems and
safety.
Prerequisite: Basic Machine Technology 1 & 2 or
Lathe Operations—External operations include plain turning,
threading, taper turning, also use of lathe chucks. Internal
operations include drilling, reaming and threading. Drill press
work is also included in the program.
W
3 years experience in Basic Machinery
W
NE
Non-District Price: $225
Price includes material fee
*Price Includes Material Fee
Course # MA-02
AUTOMOTIVE
Night: Tuesday
Course # AT-03
Night: Mon. or Tues.
Basic Machine Shop Training II
Collision Repair
This course will continue with Machine Shop Basics. Students
will be required to make a few small projects with step by step
procedures and instructions. Knowledge gained will assist
students in furthering their skills in Machine Shop Technology
Milling Operations.
This course emphasizes the application of basic skills
needed to perform tasks involved in the repair of
automobile bodies. Each student will have the
opportunity to work with the tools, instruments, and
equipment necessary to perform the tasks set forth.
le
b
a
l
i
Ava
6
01
2
l
l
Fa
This course will show students how to setup milling machines, District Price: $150.00
proper use of milling machines, and milling machine operaNon District Price: $175.00
tions. Students will be required to make a piece by piece project on a milling machine. Safety is stressed throughout this
course.
Prerequisite: Basic Machine Shop/Machine Shop Experience
DIESEL MECHANICS
Course # DM-01
Night: Wednesday
Diesel Mechanics
We now accept
Visa & MasterCard & Discover.
The students will be taught basic diesel maintenance and
service repairs focusing on the most common sub-units of
a diesel engine. They will then perform tasks following
safe and professional work habits at industry standards.
There will be a $5.00 Convenience Fee for all
credit card transactions.
9
WELDING
STEAM ENGINEERING
Course # WD-01
Course # SE-01
Arc Welding
Night: Tuesday
016
Shop instruction on the operation, care, maintenance, and
safety in machine operation, blueprint readings, welding
symbols, voltages, amperages, and rod selection. Use of
welding machine for beading, butt, flat, vertical, pipe, and
overhead welding are covered in this course.
MA State 2nd Class Fireman’s License Prep
all
F
le
b
a
il $375.00
District Price:
a
v
NonA
2
Two Semesters - Fall/Winter - 18 Weeks
Covers the basic requirements such as boiler
construction, pumps, and safe-boiler operation.
Course # SE-02
6
1
0
l2
Night: Wednesday
al
F
Covers traps, pumps,le
steam end, heaters, and code
requirements. ab
ail $300.00
District
Price:
v
ADistrict Price: $350.00
Non
MA State 1st Class Fireman’s License Prep
Course # SE-03
Night: Mon. or Tues.
Night: Wednesday
6
1
0
Covers the joints, valve settings of pumps
2 and simple
l
l
engines, turbines, and condensers.
a
F
District Price: $300.00e
l
b
Non District Price:
$350.00
a
l
ai
v
A
MA State 3rd Class Engineer’s License Prep
Course # WD-02
Night: Monday
Gas Welding
Shop instruction on the operation, care, maintenance, and
safety of acetylene and oxygen welding equipment are
covered. Related classroom instruction includes principles,
methods, and techniques of blueprint reading, welding
symbols, practical use of equipment
in
beading, fusing, brazing, cutting, and
safety.
Course # WD-03
Night: Wed. or Thurs.
MIG-TIG Welding
This is an introductory program involving the feeding of a
consumable wire through a shielding gas and also tungsten
inert gas welding.
NOTE: There is no
prerequisite to take any welding class. You
may take them in any order you wish
10
ART CLASSES
AUTOMOTIVE
Course # FCT-01
Course # EP-04
Night: Thursday
Night: Tuesday
Fuel Cell Technology - Beginner
Canvas Painting
Tired of waiting for Detroit to deliver a gasoline-hydrogen
hybrid vehicle? Just add a hydrogen-on-demand fuel cell to
your existing car! Benefits of this emerging technology
include:
Oil and acrylics for hobbyists as well as experienced
artists. Come join the fun with Debbie Macy!
More horsepower (a lot more horsepower)
Better fuel mileage (10% - 20% improvement)
Dramatically reduced emissions
A cooler, quieter running engine
Professional mechanics welcome!
Course # EP-03
Prerequisite: Students must have their own hand tools
and should be comfortable under the hood.
*Tuition includes a proven, hydrogen-on-demand fuel cell
that you will assemble from parts and get to keep/install in
your own vehicle at the end of the course.
Course # FCT-02
Please pick up material list upon registering.
Night: Wednesday
Watercolor Painting
Watercolor painting with Andrea Favret. This course is
for all levels of watercolorist. A wide variety of
techniques for the beginner to the advanced will be
covered. Emphasis will be placed or color & design
assisting each student to create unique expressions of
thought and emotion.
Night: Wednesday
Fuel Cell Technology - Advanced
Complete your hydrogen fuel-cell installation with EFIEs
(electronic fuel injection enhancers). Learn how to tune your:
Oxygen sensor(s)
Manifold absolute pressure sensor
Mass air flow sensor
Intake air temperature sensor
Coolant temperature sensor
Course # EP-02
Night: Monday Afternoon
Drawing
3 to 6 PM
Drawing with Andrea Fevret. This popular
Throttle position sensor with an ELM-327 OBD II (laptop
computer) scanner and realize typical fuel savings of 33% to
50%!
Prerequisite: Successful completion of FC-01 or permission
of the instructor. You must be driving an HOD (hydrogenon-demand) hybrid vehicle to benefit from this course.
*Tuition includes a dual-edge MAP/MAF sensor enhancer kit
that you’ll build from parts, and install in your car to complete
the fuel-cell installation.
drawing class is for every level of artist who wants
to practice the fine art of drawing. Every week a
new technique or subject will be covered. Start
with the basics of line, shape, value and progress
at your own pace to see and think like an artist.
You will be amazed as your skill level rapidly
improves in this relaxed and easy to learn
environment.
W
NE
11
FLORAL DESIGN
Course # FD-01
GARDENING
Night: Monday
Floral Design
Course # GA-01
This class will enable participants to create many floral
projects such as wreath making and decorating; how to
care and condition cut and dried flowers; making
centerpieces; corsages and boutonnieres; Oriental
designs; arrangements of different shapes, modern and
traditional; wedding bouquets and many more fun uses
for flowers. Students will take home all the projects they
make during the class. Enjoy the art of floral design for
many years to come with the processes learned in this
class.
Gardening Skills
Course # JM-01
This 8-week session will cover a wide variety of topics
relating to the home gardener such as garden tools, soil and
environmental conditions, pruning, garden design,
perennials, annuals, herbs and veggies, container and raised
bed gardening, caring for indoor plants and seed starting.
Night: Wednesday
Course # SG-01
Bead weaving - Beginners
Night: Tuesday
Basic Stained Glass
Learn the basics of Needle and Thread Stitching with
beads. Jewelry projects will include all basic stitches of
bead weaving.
Tools and kits are available for purchase at each
class.
Course # JM-02
Night: Tuesday
Stained glass isn’t just for windows anymore!
Night: Wednesday
Bead weaving - Intermediate
Take your bead weaving basic skills to the next level.
Improve your knowledge of bead weaving with these new
innovative jewelry projects.
Tools and kits are available for purchase at each
class.
*TOOLS & KITS AVAILABLE AT
EXTRA COST*
12
You will learn the copper foil method to create your
own stained glass projects. We will cover safety issues
associated with working with glass and the various tools
and supplies. We will learn how to cut glass. We will
also cover some decorative soldering techniques used to
enhance your projects. Discover how to use all your
glass scraps to create mosaic masterpieces for your
home and garden. Like BLING? You can use those
scraps for jewelry too!
Supply list available at registration desk.
ARTS & CRAFTS
Course # EP-06
Night: Wed. or Thurs.
Upholstering
Welt seam, naugahyde, refinishing, etc. Bring your
piece of furniture the first night of class. (No Couches
or Loveseats)
Supply list available at registration desk.
Any evening school student who decides to leave
his/her furniture overnight on our premises does so
at their own risk.
Course # EP-05
Night: Tuesday
Chair Recaning
Learn how to recane and/or rush your own chair.
Please bring your chair the first night of class.
DOMESTICS
Course # EP-07
Nights: Monday or Thursday
Tue or Wed, Afternoon
Domestic Sewing
Too big, too small, need it for a special occasion. Sign up
for Domestic sewing and fix them all. You don’t have to
know how to sew, only have the will to go. Beginners are
welcome, bring your own projects.
Course # EP-13
Nights: Monday or Tuesday
Knitting/Crochet
Beginners and advanced. All types of patterns, swatches,
fancy knits and garments.
Course # WC-01
Night: Thursday
Woodcarving
This course will cover basic and advanced carving
depending on the individual’s ability. You will learn
to carve in relief, in the round and several other styles.
We will discuss safety, tools, sharpening, woods and
finishes. Materials will be provided for the first class.
Students will assume additional costs thereafter.
We now accept Visa, MasterCard
and Discover Card.
There will be a $5.00 Convenience Fee
for all credit card transactions.
13
QUILTING
Course # EP-16
CULINARY ARTS
Course # EP-22
Power Machine Quilting
Night: Thursday
Nights: Mon, Tues, Wed, or Thurs
Everyday Cooking the Culinary Way
This streamline quilting course is perfect for those of you
who always wanted to make a quilt but don’t have a lot of
time. Learn the latest techniques in rotary cutting, block
construction, paper piecing, etc. Come join the fun, make
new friends, and create great quilts. These classes fill fast!
Register early!
Combine your love for food with a passion for knowledge.
This course will cover the basic and advanced preparation
of appetizers, stocks, sauces, soups, meats, seafood and
poultry. Combined with sanitation and proper knife
handling skills, together we will embark upon a tasteful
journey full of flavors and techniques. Come and learn
new skills you will use in everyday situations.
*All food included in price.
Beginners Welcome on Mondays
Prerequisite: Sewing Experience
Course # CD-01
Night: Thursday
Cake Decorating I
This hands-on course will provide the fundamentals
necessary to create any special occasion cake from
whimsical to elegant designs. Cupcake fillings and designs
will also be covered. Learn how to make shell borders,
drop flowers, sweet peas, leaves, vines, timeless roses, and
use star fill-in techniques. This course will also focus on
how to make the perfect icing consistency using basic and
butter cream icing. Please bring a small cake to class with
you every week.
MONEY SAVER
Course #
Night: Tuesday
*Material list provided.
Couponing
The purpose of taking a class like this is to save the
shopper money. Learn how to stack coupons, accumulate knowledge of store coupons policies. Become familiar with coupon lingo and to use coupons in the correct manner. At the end of this class you will have
gained valuable knowledge to save money on items
used in our home daily.
Course # CD-02
Night: Monday
Cake Decorating II
6
1
0
Why stop at decorating cakes with just icing? Extend the
excitement and fun from basic cake decorating in this
class where you will learn how to work with fondant.
You’ll be amazed at how easy it really is. This class shows
you how to cover cakes in fondant and the different
decorating options like cutouts, figures, and flowers to
make gorgeous cakes for friends and family for years to
come.
2
l
l
a
F
le
b
ila
a
v
A
*Material list provided
14
Greater New Bedford Regional
Vocational Technical High School
NON-PROFIT ORG.
U.S. POSTAGE PAID
NEW BEDFORD, MA
PERMIT NO. 318

Available Fall 2016 - Greater New Bedford Regional Vocational

Transcription

Similar documents

Giuliana Rancic - Stephanie Stephens

March - West Branch District Library

Get on the Tropicana Train

BIGGEST LOSER participant journal

Knox Talks

TEDYou at TEDActive 2012

The Scholar - Our Lady`s Assumption School

2015 Issue 1 - Queechy High School

Jefferson Journal - Jamestown Public Schools

Wandsworth Movie Calendar Summer 2016

fall brochure - Greater New Bedford Regional Vocational Technical