Teledyne TSS Saturn Gyrocompass Brochure

A Teledyne Marine Product Datasheet
Fibre optic gyrocompass and
attitude reference system
The Saturn fibre optic gyrocompass unit is built upon more
than a hundred years’ experience that Teledyne TSS have in
marine navigation. This experience and industrial innovation
has enabled the TSS engineering team to integrate the
latest solid state technologies to offer a user-friendly,
highly accurate and cost-effective gyrocompass solution for
demanding marine environments.
Ideal for any type navigation application, the MED Wheelmark
Approved Saturn products have impeccable specifications and
significant qualities ensuring suitability for many navigation
applications.
A member of Teledyne Marine
A Teledyne Marine Product Datasheet
Fibre Optic Gyrocompass
The Saturn fibre optic gyrocompass has been designed and
engineered to fulfil the primary navigation need. The fully
IMO Certified device is a strap-down attitude and heading
reference system (AHRS), resulting in a maintenance
free unit. A lightweight, compact and highly reliable
gyrocompass that provides flexibility making it suitable
for any size of vessel. The accurate and purpose driven
specification ensures that Saturn is the solution for many
navigation and control applications.
Integration is key to a successful navigation system and
importantly, the Saturn is offered with a range of repeaters
and ancillary devices. The unit is fully compatible with an
extensive range of receiving equipment, delivering a variety
of proprietary data formats at a fast rate.
All Saturn variants are provided with GPS and speed
log interfaces, and provide full attitude and heading
capabilities. Three heading accuracy variants are offered;
designated Saturn 10, Saturn 30 and Saturn 50, giving 0.1°,
0.3° and 0.5° accuracy respectively.
Saturn 10
Saturn 30
Saturn 50
PRODUCT FEATURES AND BENEFITS
• Exceptionally high dynamic accuracies
• Wheelmark Approved to Marine Equipment Directive
• Complete integration with a range of repeaters and ancillaries
• for a customisable full gyro system
• Full inertial positioning capability
• Compact, one-box solution
• GPS & speed log aiding and system integration
• Fast alignment time
Saturn Fibre Optic Gyrocompass Repeaters
Bearing Repeater
Power Supply Unit 18 - 36Vdc (15W)
1 x IEC 61162 (NMEA 0183)
Signal Inputs
1 x step (5 - 70Vdc)
1 x IEC 61162 (NMEA 0183)
Signal Outputs
Meets or exceeds IEC 60945 weather
Environmental
exposed equipment
and EMC
Dimensions: 287mm x 388mm x 388mm
Physical
Rate of Turn Indicator
Power Supply
Signal Inputs
Outputs
Environmental
and EMC
Physical
18 - 32Vdc (6W)
1 x IEC 61162 (NMEA 0183)
External Alarm Loop (optional)
Meets or exceeds IEC 60945
Dimensions: 200mm x 87mm x 166mm
(Bulkhead mounted)
Step Retransmission Unit
Power Supply
Signal Inputs
Signal Outputs
Environmental
and EMC
Physical
18 - 36Vdc (100W)
1 x step (5Vdc) 6 steps per degree
4 x step (24V, 35V, 50V or 70V)
1 x step (5Vdc)
1 x alarm relay (voltage free contacts)
Meets or exceeds IEC 60945
Dimensions: 400mm x 300mm x 120mm
Digital Repeater
Power Supply Unit 18 - 36Vdc (10W)
Signal Inputs
1 x IEC 61162 (NMEA 0183) Heading
1 x IEC 61162 (NMEA0183) Magnetic
correction
1 x step (5 - 70Vdc)
Signal Outputs
1 x IEC 61162 (NMEA 0183)
Environmental
Meets or exceeds IEC 60945
and EMC
Physical
Dimensions: 96mm x 192mm x 145mm
Dial Repeater
Power Supply
Signal Inputs
Environmental
and EMC
Physical
18 - 32Vdc (4W)
1 x IEC 61162 (NMEA 0183)
Meets or exceeds IEC 60945
Also available in Weatherproof version
Dimensions: 144mm x 144mm x 100mm
including connector
Weight: 1.25kg
Connector: 15-way subminature plug
(2.5m cable supplied)
Dial marking: 1°, 5°, 10°, 45°
Heading Repeater
Power Supply
Signal Inputs
Signal Outputs
Environmental
and EMC
Physical
18 - 36Vdc (15W)
2 x IEC 61162 (NMEA 0183)
1 x Step (5 - 70Vdc)
1 x Synchro (option)
1 x IEC 61162 (NMEA 0183)
Meets or exceeds IEC 60945
Dimensions: 144mm x 228mm x 130mm
Data Repeater
Power Supply Unit 18 - 36Vdc (8W)
1 x IEC 61162 (NMEA 0183)
Signal Inputs
1 x step (5 - 70Vdc)
1 x IEC 61162 (NMEA 0183)
Signal Outputs
Meets or exceeds IEC 60945
Environmental
and EMC
Dimensions: 96mm x 192mm x 145mm
Physical
Dial Repeater (Twin Speed)
Power Supply
Signal Inputs
Environmental
and EMC
Physical
18 - 32Vdc (6W)
1 x IEC 61162 (NMEA 0183)
Meets or exceeds IEC 60945
Dimensions: 235mm x 78mm x 22mm
Mounting: Bulkhead or Panel mounted
Connections: 1 x data cable to 15-pin
D-dub plug
Data Distribution Unit
Power Supply
Signal Inputs
Signal Outputs
Environmental
and EMC
Physical
18 - 32Vdc (main / standby supplies)
2 x IEC 61162 (NMEA 0183)
9 x IEC 61162 (NMEA 0183)
Meets or exceeds IEC 60945
Dimensions: 254mm x 254mm x 70mm
Mouting: M6 Fixings on 220mm
sq’ centres
Connectors: Multicore cable through
M20 watertight gland to internal screw
terminals
GPS
SMART GNSS ANTENNA
Power Supply Voltage
Power Consumption
Dimensions
Mounting
Channel Configuration
Horizontal Position Accuracy
Time Accuracy
Velocity Accuracy
Velocity Range
Measurement Precision
9 - 36Vdc
<3W
90mm (h) x 116mm (w) x 116mm (d)
Masthead via supplied adaptor and brackets
14 channels, GPS L1, GLONASS L1, SBAS
1.5m (single point L1), 0.6m (SBAS)
20ns RMS
0.50m/s RMS
515m/s
5cm (L1 C/C code)
Uninterruptible Power Supply
Input Voltage
Input Frequency
Output Voltage
Output Power
Output Support Time
Alarm Signals
Dimensions
Weight
85 - 264V A.C.
47 - 63Hz
24Vdc
250W (maximum)
240 min. at 50W, 30 min. at 250W
Voltage free relay contacts: Input fail, charge fail and low battery
400mm (h) x 400mm (w) x 200mm (d)
32kg
Data Rate
Time to First Fix (typical)
Default TSS configuration
1Hz
<50s (cold start), <35s (hot start)
NMEA VTG, GGA, ZDA, 4800 baud, 1 HZ
Saturn Gyrocompass Control & Display Unit
Display Capabilities
Input Voltage
Power Requirement
Dimensions
Weight
Operating Temperature
Storage Temperature
Heading, roll, pitch, latitude, longitude, speed, status and alarms
+24Vdc
<10W
96mm (h) x 192mm (w) x 60.4mm (d)
0.5kg (CDU only), 1.1kg (including bracket)
-15°C to +55°C
-30°C to +80°C
Changeover System
SIGNAL INTERFACE UNIT
Power Supply
Input
Signal Inputs
Primary Power
Supply
Standby Power
Supply
Connected Heading
Devices
Data inputs From
Each Heading Device
Illumination
Physical
Dimensions
Power Outputs Repeater Power
Signal Outputs Serial Data (heading
and rate of turn)
Rate of Turn
Alarm and Status
VDR
Alarm
CONTROL AND DISPLAY UNIT(S)
18 - 36Vdc
18 - 36Vdc
4 x Gyrocompasses or THD
4 x IEC 61162-1 or IEC 61162-2 data channels
(THS, HDT, HDG, HDH, ROT sentences)
(Input 1 requires heading)
1 x Analogue rate of turn (±10Vdc)
1 x Alarm and acknowledge relay interface
1 s Status relay
1 x IEC 61162-1
400mm (h) x 540mm (w) x 120mm (d)
6 x 18 - 36Vdc
Power Supply Input
Redundant Power Supply
18 - 36Vdc (supplied from SIU)
Communications
Communication with SRU 1 x RS422
Display
Display Type
7” widescreen colour TFT touch panel
Physical
Dimensions
Weight
144mm (h) x 196mm (w) x 100mm (d)
1.6kg
15 x IEC 61162-1 or IEC 61162-2
(depending on input)
1 x Analogue (±10Vdc)
1 x Alarm and acknowledge interface to central alarm panel (for active heading device), 2 x Alarm (for active heading device),
2 x Status (for active heading device), 4 x Alarm (1 x relay for each connected heading device),
4 x Status (1 x relay for each connected heading device), 2 x Auto changeover, 1 x Heading comparison alarm, 1 x Standby PSU alarm,
1 x General system alarm
1 x IEC 61162-1
1 x IEC 61162-1 alarm and acknowledge interface to central alarm panel
A Teledyne Marine Product Datasheet
The Full Saturn Fibre Optic Gyrocompass System
COMPANY WITH
MANAGEMENT SYSTEMS
CERTIFIED BY DNV
= ISO 9001 =
= ISO 14001 =
= OHSAS 18001 =
Specifications subject to change without notice.
© 2016 Teledyne TSS Ltd. All rights reserved.
www.teledyne-tss.com
Email: [email protected]
Head Office
Aberdeen
Houston
1 Blackmoor Lane,
Croxley Green Business Park,
Watford, Hertfordshire
WD18 8GA, UK
Tel: +44 (0)1923 216020
Fax: +44 (0)1923 216061
Silverfield House
Claymore Drive,
Bridge of Don,
Aberdeen,
AB23 8GD, UK
Tel: +44 (0)1224 706655
10661 Shadow Wood Drive,
Houston, TX 77043, USA
Tel: +1 713 461 3030
Fax: +1 713 461 3099
SG1/0216/V2
A Teledyne Marine Product Datasheet
Fibre Optic Gyrocompass
TECHNICAL SPECIFICATIONS
Saturn 10
Performance
Position
Power
Heading accuracy
Roll & pitch accuracy
Heave accuracy
Alignment time
Angular rate
Operating latitude
GPS aiding
DVL aiding
USBL / LBL aiding
No aiding
Power supply
Power consumption
Interface
Physical Characteristics
Environmental and EMC
Options
Compliance
Data formats
Dimensions
Weight in air
Weight in water
Rating
Operating temperature
Storage temperature
Environmental
EMC
MTBF
Standards
Export
Warranty
UK
USA
Saturn 30
Saturn 50
<0.1° secant latitude RMS
<0.3° secant latitude RMS
<0.5° secant latitude RMS
0.01° RMS
0.05° RMS
0.05° RMS
5cm or 5%
5cm or 5% (delayed heave)
5cm or 5% (delayed heave)
<10 minutes
>300°/s
>500°/s
>500°/s
± 80°
factor of 3 improvement
N/A
N/A
0.2% DT
N/A
N/A
factor of 3 improvement
N/A
N/A
1nm / hour
N/A
N/A
18 - 36Vdc
16W
14W
14W
4 x configurable bi-directional RS-232 / RS-422
4 x configurable transmit only RS-232 / RS-422
1 x Ethernet
Status / Alarm relay contacts
NMEA 0183 / IEC61162, TSS proprietary and industry standard
179.5mm (h) x 165mm (w) x 366mm (d)
7.0kg
5.9kg
5.9kg
N/A
N/A
N/A
IP66
IP64
IP64
-20°C to +55°C
-30°C to +70°C
Meets or exceeds IEC 60945
Meets or exceeds IEC 60945
30,000 hours
An extensive range of gyrocompass repeaters and ancillaries available
IMO A424(XI), IMO A821(19), IMO A694(17), MSC 191(79), ISO 8728, ISO 16328, IEC 60945,
IEC 62288, IEC 61162, US Coast Guard MRA
ECCN 7A003d (EAR re-export regulations do not apply outside of the USA)
ECCN 7A003d
12 months international warranty including parts and labour
Specifications subject to change without notice.
© 2016 Teledyne TSS Ltd. All rights reserved.