Hella Lighting Modules
Transcription
Hella Lighting Modules
LIGHTING MODULES www.hella.com 2 The Art of Passion The Suitable Material The Brand for Exacting Customers Cars can become works of art, when the manufacturer knows what is important. A design that attracts tastes beyond those of the masses. Sophisticated technical solutions that would be too complex and costly for largeseries production. The passion for creating a superior synthesis of vision and feasibility. The high art of development must be able to use materials that are completely suitable. Materials that not only work under harshest conditions, but also convey the superiority that corresponds to the exclusive demands of automotive aficionados. Knowing that only the best is good enough for the best cars, HELLA has developed premium functional elements for elite small series that do not simply prove their quality when used by discerning motorists, but that have already proven it under harshest conditions. After all: The best are to be found where only quality counts. Quality test 4-5 LED system technologies 6-7 Front lighting LED module 10 - 12 Modules 13 - 21 Auxiliary lights 22 - 29 Daytime running lights 30 - 37 Accessories| Indicators and position lights 38 - 39 Rear lighting 40 - 47 Side lighting 48 - 49 Electronics 50 - 51 Aston Martin Racing 52 - 53 Installation instructions 54 - 59 Product overview including weights and technical details 60 - 67 When installing and using our products in road traffic, please follow the appropriate legal requirements. 3 QUALITY TESTS: IN THE SERVICE OF RELIABILITY Lighting system are exposed to extreme stress. Not only their function is decisive, but also the conditions under which they maintain their functionality. HELLA does not accept any compromises. All products are subjected to extremely tough testing. The example of headlamps shows the required effort: Testing lab Thermal testing in 24-hour test: For 24 hours, high and low beam are alternated. Only the best material quality can survive this test. Shake and vibration test: This test simulates the behaviour of headlamps during driving. During this, the stability of the vertical and horizontal axes is checked separately. The HELLA mechanisms can withstand these requirements. Spray water test: During this test, the headlamp is continuously hit by a high-pressure water jet. Continuous moisture in the headlamp leads to corrosion and damages the inner headlight components. Only highquality headlamps pass this test. Condensation test: The switched-off headlamp is exposed to water vapour at 20 °C; this corresponds to 100% humidity in an extreme fog situation. Then the headlamp is switched in. After a short while, the condensation must have disappeared; otherwise, the headlamp is not allowed to display the HELLA logo. Light output: All HELLA headlamps are tested according to internationally agreed-on regulations. A headlamp is only a HELLA headlamp, if the standard values are clearly surpassed. The best are to be found where only quality counts. The tough lab tests pay for themselves in harsh everyday situations. Whether it is in the jungles of Borneo or on race tracks – HELLA headlamps and lights can withstand even the toughest conditions. It is not for nothing that the participants of the Land Rover Challenge and the Aston Martin Racing Team rely on proven HELLA high technology. Whoever looks for technical perfection will find HELLA brand quality. 5 LED: ATTRACTS ATTENTION QUICKLY LED SYSTEM TECHNOLOGIES: COORDINATED Flexible design Light colour similar to daylight ! excellent design solution ! First LED main headlamp by HELLA ! freely placeable LED modules ! Homogenous illumination (in the context of permitted installation measurements/regulations) ! Extremely high service life Clear optics (Reflector with pattern/lens without pattern) ! Greater efficiency ! Brilliant-finish appearance 7 FRONT LIGHTING: FASCINATING DESIGN Front lighting Main headlight modules 90 mm: Premium LED 10 - 12 90 mm: Premium 13 90 mm: Performance 14 90 mm: Classic 15 90 mm: Accessories 16 - 17 90 mm Low beam light: Illumination comparison 18 - 19 90 mm High beam: Illumination comparison 20 - 21 50 mm and 60 mm Low beam and high beam headlight modules 22 Accessories 50 mm and 60 mm headlamp modules 23 Auxiliary headlight modules Auxiliary fog light modules 24 - 25 Auxiliary high beam headlight modules 26 - 27 Cornering light Dynaview Evo2 28 - 29 Daytime running lights Daytime running lights LEDayFlex 30 - 33 LED daytime running light 34 - 35 Daytime running light with light bulbs 36 - 37 Accessories Headlight cleaning systems and ultrasonic headlight range adjustment 38 Indicator and position lights for front mounting 39 9 LED MODULE: STRONGER THAN ALL OTHERS 90 MM: PREMIUM LED Balanced Long-life Impressive The light colour, which is similar to daylight, offers more safety and comfortable, fatigue-free driving. The service life of the headlight, normally more than 15,000 real operating hours at a about a 50° operating temperature, offers major cost savings when it comes to maintenance and repair costs compared to other light systems. Exclusive automobiles distinguish themselves through their cutting-edge technology. Three white high-power LEDs function as a light source. The light is projected through the 70 mm DE lens homogeneously on the street. The HELLA LED low beam module is so high-tech that the technological advance in each turn-on action makes it clear and thus creates a visible distance to the mass market. 11 90 MM: PREMIUM LED 100% LED LED Low beam headlight Maintenance-free module expected to last for more than 15,000 operating hours at about 50°C ambient temperature. Very homogenous light and rapid start time, 35 watt power consumption, no movable parts, passive cooling system, plastic covering pane. Vehicle security system: 5A Right-hand traffic 1BL 010 820-001 Left-hand traffic 1ML 010 820-011 Carrier frame 9AH 169 580-011 (see also page 16/17) Low-beam headlight In the ECE R48 area of application, by law it is necessary to ensure failure control for a LED headlight in the vehicle's electrical system through suitable measures. 12 90 MM: PREMIUM High-end illumination. Low beam and high beam from a single headlight module, choice of Xenon or halogen technology. chnology. 70 mm DE lens. Pattern-free and hardened glass cover lens. High-quality aluminium reflector. Preinstalled adjustment-screws. Including light source. For xenon variants splashwater-proof electronic ballast. Connection using 0.5 metre shielded supply cable with detachable plug-type connection. Bi-Xenon headlight Low beam headlight and spotlight Right-hand traffic, D2S Bi-Halogen headlight Low beam headlight and spotlight 1AL 009 997-001 Right-hand traffic, H7 Left-hand traffic, D2S 1LL 009 997-011 Right-hand traffic, D2S, USA version 1AL 009 997-021 Halogen low beam headlight Ideal in combination with the matching spotlights and fog lights. 1AL 009 998-001 Right-hand traffic, H7 1BL 009 999-001 Left-hand traffic, H7 1LL 009 998-011 Left-hand traffic, H7 1ML 009 999-011 Right-hand traffic, H9, USA version 1AL 009 998-021 Right-hand traffic, H7, USA version 1BL 009 999-021 Xenon low beam light only permitted with headlight range adjustment and lens cleaning system. 13 90 MM: PERFORMANCE Optimised illumination. Modules in enhanced quality for use on long hauls. Pattern-free and hardened glass cover lens. High-quality aluminium reflector. With splashwater-proof plug-type connector. Perfectly fitting adjustment-screws included in the scope of supply. Including light source. Halogen low beam headlight Halogen spotlight, 12 V Module headlight with 50 mm DE lens Right-hand traffic, H1 Left-hand traffic, H1 14 Module headlight with FF reflector 1BL 247 042-177 with position light, H1 1K0 247 043-117 1ML 247 042-187 without position light, H1 1K0 247 043-127 90 MM: CLASSIC Proven illumination. Low beam and high beam from one headlamp module, optionally xenon or halogen technology. Pattern-free and hardened glass cover lens. Magnesium reflector. For xenon variants splashwater-proof electronic ballast. Perfectly fitting adjustment-screws included in the scope of supply. Including light source. Low-beam headlight, Spotlight Module headlight with 50 mm DE lens Module headlight with FF reflector Xenon low beam headlight D2S D2S, USA version Xenon spotlight Halogen low beam headlight 1BL 008 194-001 1BL 008 194-041 H7, right-hand traffic H9, USA version Halogen spotlight 1BL 008 193-001 with position light 1K0 008 192-001 with position light 1K0 008 191-001 1BL 008 193-021 without position light 1K0 008 192-011 without position light 1K0 008 191-011 with position light, USA version 1K0 008 191-131 without position light, USA version 1K0 008 191-051 15 Premium LED 16 •• •• •• •• •• •• Halogen high beam H9 with pos. light 008 191 •• Halogen high beam H9 008 191 •• Halogen high beam H7 with pos. light 008 191 14 Halogen high beam H7 008 191 14 Halogen low beam H9 008 193 13 Halogen low beam H7 008 193 13 High beam Xenon with pos. light 008 192 Halogen high beam 247 043 13 High beam Xenon 008 192 Halogen low beam 247 042 13 Low beam Xenon 008 194 Halogen low beam H7 009 999 12 High beam, halogen H1 with pos. light 247 043 Low beam / high beam Bi-Halogen H9 009 998-02 Part Number Low beam / high beam Bi-Halogen H7 009 998-00/-01 •) Accessories needed for proper attachment ••) Optional accessories, tailor-made for the headlights. •**) Required for xenon low beam lights, permitted as an option for halogen and LED. ▲) Required for xenon low beam lights and in some countries according to local approval regulations . Permitted as an option for halogen and LED. Legend Accessory components Classic Low beam / high beam Bi-Xenon 009 997 Product details on page Performance Low beam 010 820 90 MM: ACCESSORIES Premium 14 15 15 15 15 15 15 15 15 15 •• •• •• •• •• •• •• •• •• • • • • • • Features Carrier frame 9AH 169 580-011 black 9AH 157 657-007 silver Caps flat for angled plugs ventilated 9GH 152 654-007 non-ventilated 9GH 152 654-012 • deep for receptacle housings ventilated 9GH 145 943-001 non-ventilated 9GH 145 943-012 • Plug (vehicle side) Surplus supply H1 / H7 / Xenon 8JD 156 151-807 20 systems Surplus supply H9 8JD 158 175-807 20 systems Parking lights 8JD 156 150-807 20 systems • • • • • • • • • • • • • • Toggle high beam AMP Supersealed, 2-pin Housing 8JA 746 184-022 10 units • • • Female contact 8KW 744 837-002 50 units • • • Strand insulation 9GD 746 185-002 50 units • • • •• •• •• Surplus supply LED AMP Supersealed, 3-pin Housing 8JA 746 184-032 10 units • Female contact 8KW 744 837-002 50 units • Strand insulation 9GD 746 185-002 50 units • Headlight range adjustment systems For halogen and LED versions 6NM 007 282-221 •• •• For xenon versions 6NM 007 282-231 Mounting set for actuator 8HG 183 586-001 Bracket for right-side mounting of actuator 8HG 138 619-007 Bracket for left-side mounting of actuator 8HG 138 620-007 Automatic headlight range adjustment •**) 8XX 010 315-001 1 Sensor Headlight cleaning system set with fixed nozzles 8WS 008 549-001 4 nozzles ▲ ▲ ▲ ▲ ▲ ▲ ▲ Headlight cleaning system set with telescoping single nozzles 8WT 008 549-101 Two single nozzles ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Two double nozzles ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ •• • • •• • • ▲ ▲ •• 1 set • •• • • • • • • • • •** •** Lens cleaning systems ▲) Headlight cleaning system set with telescoping double nozzles 8WT 008 549-201 • 3 SERIES: 1 CARRIER FRAME PREMIUM LED PREMIUM PERFORMANCE = Universal carrier frame for Premium LED, Premium and Performance modules This flexibility is unsurpassed: All series can be installed with one single carrier frame. The adjustment screws are different, fit each series exactly and are included in the scope of supply. Universal premium carrier frame 9AH 169 580-011 CLASSIC* * "„Classic" model part numbers that fit the universal premium carrier frame, on request (suitable carrier frame "classic" module, see page 16). (9AH 157 657-007) 17 90 MM LOW BEAM LIGHT: ILLUMINATION IN COMPARISON HALOGEN HEADLIGHT Premium Halogen and bi-halogen® low beam Performance Halogen low beam Classic Halogen low beam Premium halogen and bi-halogen low beam p.13| Performance halogen low beam p.14| Classic halogen low beam: P.15 18 XENON HEADLIGHT Premium Bi-Xenon® low beam Classic Xenon low beam Premium Bi-Xenon low beam: P.13 | Classic xenon low beam: P.15 19 90 MM HIGH BEAM: ILLUMINATION IN COMPARISON HALOGEN HEADLIGHT Premium Bi-halogen® high beam Performance Halogen high beam Premium Bi-halogen high beam P.13| Performance halogen high beam p.14| Classic halogen high beam: P.15 20 Classic Halogen high beam XENON HEADLIGHT Premium Bi-Xenon® high beam Classic Xenon high beam Premium Bi-xenon high beam P.13 | Classic xenon high beam: P.15 21 50 MM AND 60 MM LOW BEAM AND HIGH BEAM HEADLIGHT MODULES Low-beam headlight Low-beam headlight Spotlight including D2S Xenon bulb and electronic ballast. Installation frame for 3-point attachment, adjustable from the front and rear, including Installation frame for 3-point attachment, adjustable from the front and rear, 50 mm xenon 50 mm halogen Right-hand traffic, (12 units) 1BL 009 071-047 Right-hand traffic, H7 (1 unit) 1BL 009 071-001 Right-hand traffic, (1 unit), USA version 1BL 009 071-091 Right-hand traffic, H7 (1 unit), USA version 1BL 009 071-081 Right-hand traffic, H7 (24 units) 1ML 009 071-017 Accessories (s. page 23, Fig. 1b) including installation frame for 3-point attachment, adjustable from the front and rear, 1 50 mm xenon including D2S xenon bulb with electronic ballast. (12 units) 1F0 008 390-317 rear carrier frame not included in the scope of supply (see accessories page 23, Fig. 1a) 60 mm halogen 2 1 22 H9 (not shown) 1KL 009 486-001 2 ACCESSORIES: 50 MM AND 60 MM HEADLIGHT MODULES 1 2 a) a) b) 3 1 3 b) 4 2 Carrier frame (for 50 mm halogen high beam) Plastic cap a) without headlight range adjustment holder 9AH 161 786-017 a) for fog light a) with headlight range adjustment holder 9AH 161 784-017 Rubber cap 4 Actuator motors for headlight range adjustment (50 mm) 9HD 149 253-007 b) for halogen low beam headlights 9GH 152 654-007 for fog lights (not shown) 9GH 147 009-007 Connector plug set for 12 V halogen 6NM 007 282-221 for plastic cap for 20 headlights 8JD 156 150-807 for 12 V Xenon 6NM 007 282-231 H9 plug for 20 headlights 8JD 158 175-807 Accessory set for headlight range adjustment actuator motors Brackets and articulating elements for all 90 mm and 50 mm headlights 8HG 183 586-001 23 AUXILIARY HEADLIGHT MODULES: FOG LIGHT 90 mm: Daytime running lights and fog light 90 mm: Fog light 50 mm: Micro DE Premium Edition | fog light Module headlight with pattern-free glass cover lens, 12 V with H15, 55 W / 15 W bulb, with carrier frame Minimum installation dimensions for a discreetly convincing lighting design. Aluminium reflectors with clear lens. Ideal in combination with the matching 90 mm spotlights and low beam headlights. With installation frame for 3-point attachment, adjustable from the front and rear Daytime running lights/fog light See also page 36: Daytime running light and spotlights (1F0 010 293-001) Plug set (20 units), see page 32 1N0 010 294-001 Accessories (see page 23, Fig. 1a) Halogen fog light 1N0 008 582-001 Accessories: Rubber cap for fog lights 24 with aluminium design trim (24 units) 9GH 158 051-007 1NL 008 090-317 50 mm: Micro DE Premium Edition | fog light With universal attachment bracket Individual fog light with 12 V bulb and aluminium design trim 50 mm: Micro DE fog light set 1NL 008 090-301 FF 40 with blue decorative ring 1NL 008 090-001 H8 fog lights for upright and pendant surface mounting with black decorative ring (60 units) 1NL 008 090-017 With bracket with black decorative ring (set) 1NL 008 090-821 Fog light set including professional harness 1NA 010 047-811 with universal radio remote control and black decorative ring (set) 1NL 008 090-831 Fog light 1NA 010 047-111 Caps, see page 23 With carrier frame Fog light 1NA 010 047-101 25 AUXILIARY HEADLIGHT MODULES: HIGH BEAM 50 mm: DE Xenon 50 mm: DE Xenon Premium Edition: FF 40 Ref. 17,5, 12 V, including D2S Xenon bulb and electronic ballast with black decorative ring incl. harness with relay Ref. 17.5, 12 V, black housing colour, inc. D2S Xenon bulb and electronic ballast, aluminium design trim panel Ref. 12.5, Spotlight for upright and pending surface mounting Spotlight set Individual light 1F0 008 390-801 1F0 008 390-001 Set inc. professional harness 1F0 008 390-821 With bracket Individual light with bracket for mounting in front aprons, incl. harness with relay 1F0 008 390-301 Spotlight set (Ref. 12.5) incl. professional harness 1FA 010 047-801 Spotlight (ref. 12.5) 1FA 010 047-011 With carrier frame Spotlight 26 1FA 010 047-001 SPOT LIGHT AND DAYTIME RUNNING LIGHTS 90 mm spot light and daytime running lights Module headlight with pattern-free glass cover lens, 12 V with H15, 55 W / 15 W bulb, with carrier frame Spot light / daytime running lights 1F0 010 293-001 See also page 24: Daytime running lights and fog light (1NO 010 294-001) Accessories Plug set, 3-pin 8JD 162 581-802 27 DYNAVIEW® EVO2: MORE LIGHT IN CURVES DynaView® Evo2 combines the cornering light and fog light safety functions in compact round auxiliary lights which can be universally installed in many different vehicles. 28 When the low beam is switched on, the right or left cornering light is activated automatically and immediately when the indicator is actuated or when the vehicle drives round a bend at a speed of less than 40 km/h. A yaw rate sensor measures the vehicle's angular acceleration and triggers the turn-on signal when the car drives through a curve. At the end of the curve, a dimmer softly fades the extra light. If the reverse gear is engaged, both cornering lights are switched on and ensure broad and bright illumination of the areas along the left and right front of the vehicle. CORNERING LIGHT: DYNAVIEW EVO2 Approved as a fog light according to ECE-R19 B-Series 03 and as a cornering light according to ECE-R 119. DynaView® Evo 2 inc. H7 bulb Dyna View EVO 2 incl. H7 bulb Connector plug set for DynaView® Evo2 with bracket, 12 V ECE/SAE with carrier frame ECE/SAE for 20 headlights 8JD 156 151-807 Set incl. control electronics and professional harness individual left 1NO 009 295-031 Cornering light control unit (not shown) 24 units 5DF 009 244-007 individual right 1NO 009 295-041 Harness set for cornering light (not shown) 8KB 163 160-801 1N0 009 295-801 individual left 1N0 009 295-011 individual right 1N0 009 295-021 29 DAYTIME RUNNING LIGHTS: SPACE FOR IMAGINATION AND INDIVIDUALITY DAYTIME RUNNING LIGHTS: LEDAYFLEX Design Technology Design A current trend in vehicle design is the customisation of headlight design for daytime and night-time driving. The lighting technology that we have further developed with our “LEDayFlex” daytime driving lights is the foundation for exciting design solutions. “LEDayFlex” light chains with 5 to 8 firmly connected LED light modules can be integrated into an almost infinite number of configurations in the vehicle front-end. In the process, they follow the shape of the vehicle's contours in depth. “LEDayFlex” allows for many different design options as long as they comply with legal regulations. Designs can include a powerful daylight-like light signal during the day and, if desired, in versions with the option to switch over to position lighting, also at night. This gives the designer a powerful system. Designing a vehicle-specific lens set. 31 THE WORLD'S FIRST FLEXIBLE DAYTIME RUNNING LIGHTS: LEDAYFLEX 32 5 LED light ight modules for daytime running light 2PT 010 458-801 Accessories 5 LED D light modules for daytime running light with position light 2PT 010 458-811 connector Connection cable set inc. two-way connecto 8KA 165 959-001 6 LED D light modules for daytime running light 2PT 010 458-821 Extension cable 2-pin 500 mm modules)) (Control unit and light module 8KB 178 139-001 6 LED light modules for daytime running light with position light 2PT 010 458-831 3-pin AMP matin mating connector onnector (1 se set) 8KW 744 807-801 7 LED light modules les for daytime running light 2PT 010 458-841 7 LED light modules for daytime me running light with position light 2PT 010 10 458-851 8 LED light modules for daytime me running light 2PT 01 010 458-861 8 LED light modules for daytimee running light with position lig light 2PT 010 458-871 3-pin AMP mating connector (10 sets) 8JA 746 184-032 Plug contacts (50 units) 8KW 744 837-002 Individual seals (50 units) 9GD 746 185-002 max. 1,500 mm min. 600 mm** min. 250 mm* Legislation allows different attachment variations. However, distances and radiation angles are specified. See the HELLA assembly instructions for more detailed information. Check online for more information on other legal requirements and installation regulations. ! * When used as a position light, the minimum attachment height must be 350 mm and the maximum distance from the outside edge must be 400 mm. ! ** For vehicles with a width < 1,300 mm, the distance must be at least 400 mm. ! When daytime running lights are used as position light, the standard position light must be disabled in accordance with ECE-R 48. min. max. = minimum distance = maximum distance 33 LED DAYTIME RUNNING LIGHT LED daylight running light set, rectangular LED daylight running light set, round LED daytime running light set with silver-grey aluminium housing and integrated electronics. Bracket for upright and suspended installation in or on the front apron. Power consumption: 12 V/5.5 W with integrated electronics, including harness, universal bracket, 3 highpower LED per light, multi-voltage 9–33 V Power consumption: 12 V/max. 5.5 W Set Contents: 2 lights each with 3 LEDs, professional harness with AMP supersealed plug, bracket. 2PT 009 496-801 Set for surface-mounting 2 lights including harness and universal bracket Individual light with PO function with attached cable and 3-pin AMP plug 2PT 009 496-007 Accessories Harness and mating connector, see page 32 2PT 009 599-811 Individual light without bracket, left 2PT 009 599-111 without bracket, right 2PT 009 599-121 without bracket, with PO function, left 2PT 009 599-131 without bracket, with PO function, right 2PT 009 599-141 Accessories 34 Mounting plate, front screw connections 9AH 165 968-001 Bracket for suspended mounting, 3-pin plug, see page 32 8GH 165 967-001 LED DAYTIME RUNNING LIGHT LED daytime running lights LEDayLine® LED daytime running light set with integrated electronics in black plastic housing and attachment springs for mounting in the front apron. Set includes: two lights each with 5 LEDs, professional harness with AMP Supersealed connector, fastening springs. Power consumption: 12 V/max. 9 W. Daytime running light set with position light, 12 V incl. professional harness 2PT 010 043-801 Daytime running light with position light, 12 V, left 2PT 010 043-011 Daytime running light with position light, 12V, right 2PT 010 043-021 Accessories Harness for 2 lights, see page 32 Plugs for individual lights, see page 32 35 DAYTIME RUNNING LIGHT WITH LIGHT BULBS 36 90 mm daytime running lights and spot light 90 mm daytime running lights and fog light Module headlight with pattern-free glass cover lens, 12 V with H15, 55 W / 15 W bulb, with carrier frame Module headlight with pattern-free glass cover lens, 12 V with H15, 55 W / 15 W bulb, with carrier frame Spot light / daytime running lights 1F0 010 293-001 Fog light / daytime running lights 1N0 010 294-001 Accessories Plug set, 3-pin 8JD 162 581-802 Accessories Plug set, 3-pin 8JD 162 581-802 90 mm daytime running lights and LED position light Daytime running lights FF 40® Headlight with pattern-free glass cover lens, 12 V with P21W Longlife bulb and Kartoval LED Daytime running lights set for particularly narrow installation spaces. Set includes: two lights incl. P21W bulbs, professional harness, relay with daytime running light/position light 2BE 010 102-101 With bracket Accessories Daytime running lights set 2PT 010 047-821 Mounting plate, front screw connections 9AH 165 968-001 Daytime running light, single 2PT 010 047-211 Accessories Plug set, 3-pin 8JD 162 581-802 With carrier frame Daytime running light, single 2PT 010 047-201 37 HEADLIGHT CLEANING SYSTEMS AND ULTRASONIC HEADLIGHT RANGE ADJUSTMENT Control unit Adjustment cable Rear sensor Parking lights Ground opt. front sensor H/L actuator Ultrasonic headlight range adjustment (LWR) with fixed nozzles 8WS 008 549-001 with telescopic individual nozzles with telescopic double nozzles 8WT 008 549-101 as 8WS 008 549-001, but with longer pipes 8WT 008 549-201 The ultrasonic system is a headlight range adjustment system for 50 mm and 90 mm headlight modules for original equipment and upgrading vehicles with xenon headlights. The system sensor measures the distance from the underside of the vehicle to the road surface and forwards the signal to the central control unit, which then achieves optimum setting of the Xenon headlights via the setting motors. For more detailed information, see assembly instructions. 8WS 008 549-011 Headlight range adjustment system with one sensor (for cars) 8XX 010 315-001 These headlight cleaning systems are ECE type-approved for the following HELLA headlight series when installed in accordance to the enclosed assembly instructions. In some countries, legislation prescribes the use of a lens cleaning system when Xenon low beam headlights are used, according to local approval regulations. (Permitted as an option for halogen and LED.) 38 HELLA cleaning systems work according to the water jet principle, which manages without wipers and brushes by using the kinetic energy from the thick water drops to loosen and rinse away dirt particles from the lens. Ø 50 mm Ø 90 mm Ø 90 mm 1BL 009 071-… 1KO 008 191-... 1LL 009 997-... 1ML 009 071-… 1KO 008 192-... 1BL 010 820-... 1F0 008 390-… 1BL 008 193-... 1ML 010 820-... 1BL 008 194-... 1BL 247 042-... 1AL 009 997-... 1ML 247 042-... INDICATOR AND POSITION LIGHTS FOR FRONT MOUNTING 90 mm indicators 60 mm Premium lights 60 mm Premium position lights t Headlight with pattern-free glass cover lens, 12 V with silver-coloured P21W Longlife bulb and Kartoval LED with clear lens Signal colour white Indicator/position light 2BE 010 102-001 Mounting plate, front screw connections 9AH 165 968-001 2BA 009 001-071 with 12 LEDs 2PF 009 001-421* 2BA 009 001-201 with bulb (not shown) 2PF 009 001-081 Connector plug set for 20 lights Accessories Plug set, 3-pin Indicator with amber bulb with silver-coloured bulb Accessories Connector plug set 8JD 156 150-807 for 20 lights 8JD 156 150-807 8JD 162 581-802 *Please note the information on page 59 39 REAR LIGHTING Rear lighting 60 mm Premium circular rings and ring modules 42 60 mm LED lights 43 60 mm Premium lights for rear installation 44-45 Premium lights for rear surface-mounting 46 Rear lights and safety stoplights 47 41 LOTS OF COMBINATIONS: 60 MM PREMIUM LIGHTS AND RING MODULES Combination examples: Circular module without lighting function The optimal program addition for the 60 mm Premium lights is the ring module. This ring module can be used in many ways and is offered with taillight and brake light function (with 16 LEDs), as reflector or as a decorative light without lighting functions. It is available with a choice of clear or red cover lens. The rear brakelight ring module is equipped with a 3-pin waterproof Superseal connection plug. The optimal installation of the 60 mm Premium lights with the ring module allows for a rear-side screw attachment with an adapter ring. In addition, it is possible to mount this combination on the outside of the vehicle. This is made possible by an installation adapter equipped with a bayonet system (part number on request). 60 MM PREMIUM LED LIGHTS Combination examples with reflector ring LED combination rear light Innovative lights with cutting-edge lighting technology through the use of 12 high-power LEDs. Further highlights are the clear, non-patterned cover lens and the possibility to combine it with all modules of series 009 001 and 009 362. The slim design height of 42.2 mm opens up possibilities for new installation positions in particularly cramped conditions. 43 60 MM PREMIUM LIGHTS FOR REAR INSTALLATION in function 12 Power LEDs Macro reflector 12 V, with clear lens red Tail-stoplight 2SB 009 001-401* Indicator 2BA 009 001-411* Indicator with failure pulse 2BA 009 001-431* * Please see the notes on page 59 regarding LED indicators and LED indicator failure check. 44 8RA 009 001-031 a) b) c) 60 mm Premium lights Design ring Ø 71.6 mm with installed bulbs 12 V suitable for 60 mm Premium lights (Part number... 009 001-... except for LED versions), perfect high-sheen finish with one “click” Red lens Taillight 2SA 009 001-041 Stop light 2DA 009 001-051 Tail/stoplight 2SB 009 001-061 Rear fog light 2NE 009 001-021 a) Premium silver 9HB 164 168-002 b) High-sheen chrome-plated 9HB 161 122-012 c) Silver 9HB 161 122-007 Grey lens Direction indicator 2BA 009 001-001 Reversing light 2ZR 009 001-011 Indicator with silver-coloured bulb 2BA 009 001-191 45 PREMIUM LIGHTS FOR REAR SURFACE-MOUNTING Combination example for a combination rearlight with design ring Ø 71.6 mm high-sheen chrome-plated Circular modules ... 009 001-... 9HB 161 122-012 Adapter ring screw connection (for mounting frontally or in the circular module) for premium lights Ø 60 mm (with and without function) available with a choice of clear or red cover lens, 12 V Bulb-based version Tail light/stop light, red 2SB 009 362-041* black Combined tail/stop light, clear 2SB 009 362-021* for the attachment of LED lights or the reflector Reflex-reflector, red 8RA 009 362-001 black (not shown) 9XD 161 119-007 9XD 161 119-017 For surface-mounting identical decorative lights 46 Red lens 8XU 009 362-101 Clear lens 8XU 009 362-111 * Please see the notes on page 59 regarding LED indicators and LED indicator failure check. REAR LIGHTS AND SAFETY STOPLIGHTS Design ring Ø 118 mm (not for SAE version) Combined tail-stop-indicator light SAE LED safety brake lamp suitable for circular module 009 362 perfect high-sheen finish with one “click” 12 V / 4.8 W current consumption ca. 0.4 A , for rear flush-mounting, clear lens, with 24 red LEDs, suitable for the light series 009 362-..., 009 001-... for horizontal flush-mounting, with 12 red LEDs and connected cable and 2-pole AMP plug high-sheen chrome-plated 9HB 163 085-012 silver 9HB 163 085-001 2SD 009 362-201* 12 V, red lens 2DA 959 071-537* 12 V, clear lens 2DA 959 071-037* 12 V/2 W 47 SIDE MARKER LIGHTING Side marker lights set Side marker lights set LED auxiliary indicator for horizontal flush-mounting, for retrofitting to passenger cars < 6 m, with LED technology for horizontal and vertical flush-mounting, 4 units each, with amber 12 V / 5 W bulb, incl. connecting cable Side marker lights, amber (4 units) 2PS 008 138-801* in arrow design for horizontal flush mounting, category 5, simple gluing into prepared mirror, can also be used as a universal auxiliary indicator; 12 V/0.7 W, fixed 2-pin cable Side marker lights, black (4 units) 2PS 008 138-811* Side marker lights, silver (4 units) 2PS 008 138-821* 2PS 008 541-801 2BM 008 771-001* 12 V/0.7 W, fixed 2-pin cable * Please see the notes on page 59 regarding LED indicators and LED indicator failure check. 49 INTELLIGENCE IN THE WORKPLACE: ELECTRONICS The assignment of vehicle functions to the electronic centres of the car is not a trivial matter. No, this requires a profound knowledge of the mutual interactions and the protection against external interference effects. 50 It becomes increasingly possible to replace mechanical components with superior electronic ones. HELLA plays a pioneering role in this trend. The advantages of new technologies prove their power and endurance particularly in premium cars: High precision and minimal wear – a strong argument for HELLA electronics. 3 2 4 5 1 1 Pedal sensors Suspended Pedals: Contact-less, precise measuring system of the HELLA sensor with extremely low mechanical wear and high electromagnetic interference immunity Intelligent Battery Sensor (IBS) Actuators The IBS precisely measures current, voltage and ambient temperature of the battery and determines the charge state and ageing of the battery. The direct mounting at the standard battery pole using the integrated shunt at the sensor allows for a simple plug-and-play installation. Assortment of electromotive actuators tried and tested a million times – can be universally used for numerous locking and unlocking applications (High, Medium and Low Force) 6PV 009 591-011 6PK 010 842-001 ) 70.9 (R170 Force application point: Kraftangriffspunkt: 2 IBS control complete set 3 High Force 6NW 009 424-791 4 Medium Force 6NW 009 203-421 5 Low Force 6NW 863 330-011 Complete set, including sensor, display (flush-mounting variant) and harness for simple integration and retrofitting of an active energy management system 6PY 178 103-831 Idling: Leerlauf: 225 17° You can find the complete HELLA sensor/actuator product line on the internet: www.hella.com/sensors-actuators 51 WINNING WITH HELLA LIGHTING SYSTEMS 52 Demanding motorists are not content with large-series production technology. They demand something special and strive for technical perfection. HELLA is aware of its responsibility and equips the Aston Martin Racing Team with lighting technology for the Le Mans Series. There are hardly any tougher conditions for headlamps than the continuous stress during the long nights at Le Mans. HELLA congratulates the Aston Martin Racing Team, as it has impressively proven that the perfect results of HELLA headlamps in the testing lab are as impressively duplicated on the race track. There can be no failures, as otherwise the whole effort would be in vain. Aston Martin's decision for HELLA was correct: In 2009, the team was the overall winner. 53 THE FRONT: AS IT SHOULD BE. 54 Type Quantity Colour Front LB 2/2 white required LB = Low beam HB 2/4 white required UB = High beam FF 2/2 white or amber permitted FF = Fog light PO 2/2 white required PO = Position light DI 2/2 white required DI = Direction indicator = Daytime running lights = Cornering light DRL 2/2 white required DRL CL 2/2 white required CL Type Quantity Colour Vehicle categories DI 1 per side amber Valid for front, rear and side SML front 1 per side amber M1 SML rear 1 per side amber or red up to 3.5 t/9 persons 55 THE REAR: AS LAWS REQUIRE 56 Type Quantity (min./max) Colour Front DI 2/2 amber required SL 2/4 red required RPO 2/2 red required RF 1/2 red required CHS 1 red permitted RR 2/- white required RL 1/2 white required LP 1/- white required DI = Rear indicator SL = Stoplight RPO = Taillight RF = Rear fog light CHS = High-mounted stop lamp RR = Rear reflectors RL = Reverse light LP = number plate light 57 LED LIGHTING: FAILURE CONTROL AND ELECTRICAL CONNECTION 58 E Operation of LED lights / LED headlights with AC voltage or synchronised DC voltage is not permitted. In the ECE R48 area of application, by law, it is necessary to ensure failure control for LED lights / LED headlights in the vehicle's electrical system through suitable measures. As checking of the indicators is required by law, we recommend operating the light only in conjunction with the indicator control unit, HELLA part no. 5DS 009 552-... . Due to the low power consumption of LED lights, which are distinctly different from a bulb version, the proper functioning of bulb failure control must be checked when they are integrated into vehicle electrical systems. 59 Fl us h ro va l m ar k m ou nt Su in r fa g ce m Un ou ive nt in rs g al y te ch no lo g n gh tin g fu nc tio gh tin g gh t/u ni t Vo lta ge un it LB LED E13/59 ECE 90 mm: LED Low beam headlight 1ML 010 820-011 12 Left-hand traffic 1 Multi-voltage 1,100 g LB LED E13/60 ECE Carrier frame (accessory) 9AH 169 580-011 12 Carrier frame 1 Bi-Xenon headlight Low beam headlight and spotlight 1AL 009 997-001 13 Right-hand traffic, D2S 1 12V 1288 g LB + HB Xenon E1 2484 / E1 2485 ECE • • Bi-Xenon headlight Low beam headlight and spotlight 1LL 009 997-011 13 Left-hand traffic, D2S 1 12V 1288 g LB + HB Xenon E1 2484 / E1 2485 ECE • • Bi-Xenon headlight Low beam headlight and spotlight 1AL 009 997-021 13 Right-hand traffic, D2S 1 12V 1288 g LB + HB Xenon SSB 557/ SAE, DOT USA • • Bi-Halogen headlight Low beam headlight and spotlight 1AL 009 998-001 13 Right-hand traffic 1 12V 820 g LB + HB Halogen H7 E1 2484 / E1 2485 ECE • • Bi-Halogen headlight Low beam headlight and spotlight 1LL 009 998-011 13 Left-hand traffic 1 12V 820 g LB + HB Halogen H7 E1 2484 / E1 2485 ECE • • Bi-Halogen headlight Low beam headlight and spotlight 1AL 009 998-021 13 Right-hand traffic 1 12V 820 g LB + HB Halogen, H9 SSB 557/ SAE, DOT USA • • Te Se Ap p 1,100 g st Multi-voltage Li 1 Li Right-hand traffic W ei 12 t Si Pa ck Va ri a nt Pa rt de ag in g r Nu m be en ce er 1BL 010 820-001 Re f 90 mm: LED Low beam headlight 90 mm: Premium LED 100 g • • • • • 90 mm: Premium Halogen low beam headlight 1BL 009 999-001 13 Right-hand traffic 1 12V 687 g LB Halogen H7 E1 2486 / E1 2487 ECE • • Halogen low beam headlight 1ML 009 999-011 13 Left-hand traffic 1 12V 687 g LB Halogen H7 E1 2486 / E1 2487 ECE • • Halogen low beam headlight 1BL 009 999-021 13 Right-hand traffic, USA version 1 12V 687 g LB Halogen H7 SSB 558/ SAE, DOT USA • • 90 mm: Performance Halogen low beam headlight 1BL 247 042-177 14 Right-hand traffic 36 12V 513 g LB Halogen, H1 E1 2397 ECE • • Halogen low beam headlight 1ML 247 042-187 14 Left-hand traffic 36 12V 513 g LB Halogen, H1 E1 2398 ECE • • Halogen spotlight 1K0 247 043-117 14 with position light 36 12V 288 g HB + PO Halogen, H1 E1 2397 ECE • • Halogen spotlight 1KO 247 043-127 14 without position light 36 12V 281 g HB Halogen, H1 E1 2397 ECE • • 1BL 008 194-001 15 Right-hand traffic D2S 1 12V 1046 g LB Xenon E1 917 ECE • • Xenon low beam headlight 1BL 008 194-041 15 D2S, USA version 1 12V 952 g LB Xenon SSB 448/ SAE, DOT USA • • Halogen low beam headlight 1BL 008 193-001 15 Right-hand traffic 1 12V 475 g LB Halogen H7 E1 917 ECE • • Halogen low beam headlight 1BL 008 193-021 15 USA version 1 12V 448 g LB Halogen, H9 SSB 448/ SAE, DOT USA • • Xenon spotlight 1K0 008 192-001 15 with position light, D2S 1 12V 872 g HB Xenon E1 917 ECE • • Xenon spotlight 1K0 008 192-011 15 without position light 1 12V 794 g HB Xenon E1 917 ECE • • Halogen spotlight 1K0 008 191-001 15 with position light 1 12V 302 g HB Halogen E1 917 ECE • • Halogen spotlight 1K0 008 191-011 15 without position light 1 12V 253 g HB Halogen E1 917 ECE • • Halogen spotlight 1K0 008 191-131 15 with position light, USA 1 12V 311 g HB Halogen SSB 449/ SAE, DOT ECE/SAE • • Halogen spotlight 1K0 008 191-051 15 without position light, USA 1 12V 291 g HB Halogen SSB 449/ SAE, DOT ECE/SAE • • Xenon low beam headlight 1BL 009 071-047 22 Right-hand traffic, D2S, with aluminium design trim panel 12 12V 462 g LB Xenon, D2S E1 1903/ E1 1904 ECE • • Xenon low beam headlight 1BL 009 071-091 22 Right-hand traffic, D2S, USA, with aluminium design trim panel 1 12V 462 g LB Xenon, D2S USA • • 90 mm: Classic Xenon low beam headlight Spotlight 15 50 mm and 60 mm Low beam and high beam headlight modules 90 mm accessories can be found on page 16 60 Fl us h Ap p ro va l m ar k st Te gh tin g m ou nt Su in r fa g ce m Un ou ive nt in rs g al y te ch no lo g n ag in g fu nc tio Li 22 gh tin g 1ML 009 071-017 Li Halogen low beam headlight gh t/u ni t Right-hand traffic, USA, with aluminium design trim panel W ei 22 t 1BL 009 071-081 Vo lta ge un it Halogen low beam headlight Se 22 Pa ck Si de Pa rt Va ri a nt r Nu m be en ce er 1BL 009 071-001 Re f Halogen low beam headlight still for 50 mm and 60 mm: Low beam and high beam headlight modules Right-hand traffic, with aluminium design trim panel 1 12V 462 g LB Halogen H7 E1 1903/ E1 1904 ECE • • 1 12V 462 g LB Halogen H7 USA • • Left-hand traffic, with aluminium design trim panel 24 12V 462 g LB Halogen H7 E1 1903/ E1 1904 ECE • • 1 12V 750 g HB Xenon D2S E1 1120/ TF 40 SAE ECE/SAE • • 1 12V 662 g HB Halogen, H9 SSB 509/ SAE, DOT ECE/SAE • • Xenon spotlight 1F0 008 390-317 22 50 mm D2S with aluminium design trim panel Halogen spotlight 1KL 009 486-001 22 60 mm with aluminium design trim panel Carrier frame (not for halogen spotlights) 9AH 161 786-017 23 without LWR holder 1 102 g • Carrier frame (not for halogen spotlights) 9AH 161 784-017 23 with LWR holder 1 137 g • Actuator motors for headlight range adjustment 6NM 007 282-221 23 for 12 V halogen 1 12V 85 g Actuator motors for headlight range adjustment 6NM 007 282-231 23 for 12 V Xenon 1 12V 103 g Plastic cap 9HD 149 253-007 23 for fog lights Rubber caps 9GH 152 654-007 23 for halogen low beam headlight Rubber caps 9GH 147 009-007 23 for fog lights 1 21 g Connector plug set 8JD 156 150-807 23 for plastic cap for 20 headlights 20 10 g Connector plug set 8JD 158 175-807 23 H9 plug for 20 headlights 20 180 g Accessory set for headlight range adjustment actuator motors 8HG 183 586-001 23 Brackets and articulating elements 1 13 g 1N0 010 294-001 24 with daytime running light/fog light 1 Plug set (accessories) 8JD 162 581-802 24 3-pin 20 Fog light 90mm 1N0 008 582-001 24 Halogen fog light 1 Accessories: rubber cap 9GH 158 051-007 24 for fog lights 36 Fog light 1NL 008 090-317 24 50 mm Halogen 12 V H3 Micro DE Premium Edition: Fog light 1NL 008 090-301 25 Micro DE fog light set 1NL 008 090 001 25 with blue decorative ring 1 Micro DE fog light set 1NL 008 090 017 25 with black decorative ring (60 units) 60 Micro DE fog light set 1NL 008 090 821 25 with black decorative ring 1 Micro DE fog light set 1NL 008 090 831 25 with universal radio remote control and black decorative ring (set) FF40 Fog light set with bracket 1NA 010 047-811 25 FF40 Fog light set with bracket 1NA 010 047-111 25 FF40 Fog light set with carrier frame 1NA 010 047-101 25 Accessories: 50 mm headlight module 160 49 g 1 25 g Auxiliary headlight modules: Fog light 90 mm daytime running lights and fog light Halogen, H15 E1 2681 ECE • • FF Halogen H7 E1 1342 SAE • • 380 g FF Halogen H3 E1 877 ECE/SAE • • 12V 380 g FF Halogen H3 E1 877 ECE/SAE • • 12V 337 g FF Halogen H3 E1 877 ECE/SAE • • 12V 245 g FF Halogen H3 E1 877 ECE/SAE • • • 12V 950 g FF Halogen H3 E1 877 ECE/SAE • • 1 • 12V 950 g FF Halogen H3 E1 877 ECE/SAE • • Set inc. professional harness 1 • 12V 340 g FF Halogen, H8 E1 2529 ECE • • single 1 12V 340 g FF Halogen, H8 E1 2529 ECE • • single 1 12V 201 g FF Halogen, H8 E1 2529 ECE with installation bracket, aluminium design trim panel 12V 450 g 12V 383 g 24 12V 1 DRL + FF 10 g 33 g • • • 61 m ou nt Su in r fa g ce m Un ou ive nt in rs g al ro va l y m ar k te ch no lo g n gh tin g fu nc tio E1 1120 ECE/SAE DE Xenon Premium Edition 1F0 008 390-821 26 with silver Premium housing, gas discharge lamps and ballast 1 • 12V 1130 g HB Xenon E1 1120 ECE/SAE • • DE Xenon Premium Edition 1F0 008 390-301 26 1 unit with bracket for front apron installation 1 12V 1130 g HB Xenon E1 1120 ECE/SAE • • DE Xenon Premium Edition 1F0 008 390-001 26 1 unit with black decorative ring 1 • FF40 Spotlight set with bracket 1FA 010 047-801 26 (Ref. 12.5) inc. professional harness 1 FF40 Spotlight with bracket 1FA 010 047-011 26 (Ref. 12.5), individual FF40 Spotlight set with carrier frame 1FA 010 047-001 26 1F0 010 293-001 Dyna View Evo2 incl. H7 bulb with bracket Te Re f Fl us h Xenon Ap p HB st 1100 g Li 12V Li • W ei Vo lta ge 1 t Se gh tin g ng Pa ck ag i with black decorative rings, gas discharge lamps and ballast Va ri a nt 26 de Si gh t/u ni t un it r Nu m be Pa rt en ce 1F0 008 390-801 er DE Xenon Auxiliary headlight modules: High beam • • 12V 1130 g HB Xenon E1 1120 ECE/SAE 12V 340 g HB Halogen, H11 E1 2529 ECE/SAE • • 1 12V 340 g HB Halogen, H11 E1 2529 ECE/SAE • • (Ref. 12.5), individual 1 12V 340 g HB Halogen, H11 E1 2529 ECE/SAE • • 27 with daytime running light/high beam 1 450 g DRL + FF Halogen, H15 E1 2680 ECE/SAE • • 1N0 009 295-801 29 incl. control electronics (with bracket) 1 12V 1285 g CL Halogen H7 E1 1951 ECE/SAE Dyna View Evo2 incl. H7 bulb with bracket 1N0 009 295-011 29 individual, left 1 12V 770 g CL Halogen H7 E1 1951 ECE/SAE • • Dyna View Evo2 incl. H7 bulb with bracket 1N0 009 295- 021 29 individual, right 1 12V 770 g CL Halogen H7 E1 1951 ECE/SAE • • Dyna View Evo2 incl. H7 bulb with carrier frame 1N0 009 295-031 29 individual left 1 12V 388 g CL Halogen H7 E1 1951 ECE/SAE • • Dyna View Evo2 incl. H7 bulb with carrier frame 1N0 009 295-041 29 individual, right 1 388 g CL Halogen H7 E1 1951 ECE/SAE • • Connector plug set for Dyna View EVO2 8JD 156 151-807 29 for 20 headlights 1 Dyna View Cornering light control unit 5DF 009 244-007 29 Cornering light control units 24 Dyna View Harness set 8KB 163 160-801 29 for cornering light 1 • LEDayFlex Daytime running lights 2PT 010 458-801 32 5 LEDs 1 • Multivoltage 646 g DRL LED E24 5852 ECE/SAE • • LEDayFlex Daytime running light with position light 2PT 010 458-811 32 5 LEDs 1 • Multivoltage 646 g DRL + PO LED E24 5852 ECE/SAE • • LEDayFlex Daytime running lights 2PT 010 458-821 32 6 LEDs 1 • Multivoltage 696 g DRL LED E24 5852 ECE/SAE • • LEDayFlex Daytime running light with position light 2PT 010 458-831 32 6 LEDs 1 • Multivoltage 696 g DRL + PO LED E24 5852 ECE/SAE • • LEDayFlex Daytime running lights 2PT 010 458-841 32 7 LEDs 1 • Multivoltage 746 g DRL LED E24 5852 ECE/SAE • • • • (High beam) and daytime running lights 90 mm daytime running lights and spot light Cornering light and fog light • • • • 11 g Multivoltage 504 g Daytime running lights: LEDayFlex and accessories 62 m ou Su nt r fa in g ce m ou Un nt ive in rs g al Fl us h m ar k ro va l y te ch no lo g n gh tin g fu nc tio gh tin g gh t/u ni t Vo lta ge un it DRL + PO LED E24 5852 ECE/SAE • • LEDayFlex Daytime running lights 2PT 010 458-861 32 8 LEDs 1 • Multivoltage 796g DRL LED E24 5852 ECE/SAE • • LEDayFlex Daytime running light with position light 2PT 010 458-871 32 8 LEDs 1 • Multivoltage 796g DRL + PO LED E24 5852 ECE/SAE • • Connection harness 8KA 165 959-001 32 including mating connector 1 Extension lead 8KB 178 139-001 32 2-pin 500 mm 1 3-pin AMP mating connector (1 set) 8KW 744 807-801 32 1 3-pin AMP mating connector (10 sets) 8JA 746 184-032 32 10 3g Plug contact 8KW 744 837-002 32 50 0.34 g Individual seals 9GD 746 185-002 32 50 0.6 g LED daylight running light set, rectangular 2PT 009 496-801 34 3 LEDs per light Set / 2 units LED daylight running light set, rectangular 2PT 009 496-007 34 3 LEDs per light 1 LED daylight running set, round 2PT 009 599-811 34 with bracket 1 12/24V 627 g DRL LED ECE/SAE LED daytime running light, round 2PT 009 599-111 34 without bracket, left 1 12/24V 250 g DRL LED ECE/SAE • • LED daytime running light, round 2PT 009 599-121 34 without bracket, right 1 12/24V 250 g DRL LED ECE/SAE • • LED daytime running light, round 2PT 009 599-131 34 without bracket, with PO function, left 1 12/24V 250 g DRL LED ECE/SAE • • LED daytime running light, round 2PT 009 599-141 34 without bracket, with PO function, right 1 12/24V 250 g DRL LED ECE/SAE • • Mounting plate (accessories) 9AH 165 968-001 34 Front screw connections 1 62 g Bracket (Accessories) 8HG 165 967-001 34 or suspended mounting with screws 1 114 g LED daytime running lights LEDayLine 2PT 010 043-801 35 with position light, incl. professional harness 1 LED daytime running lights LEDayLine 2PT 010 043-011 35 with position light, left 12V 260 g DRL + PO LED E 1 2578 ECE/SAE • • LED daytime running lights LEDayLine 2PT 010 043-021 35 with position light, right 12V 260 g DRL + PO LED E 1 2578 ECE/SAE • • 90 mm daytime running lights and spot light 1F0 010 293-001 36 with daytime running light/high beam 1 450 g DRL + FF Halogen, H15 E1 2680 ECE R87/ R112 • • 90 mm daytime running lights and fog light 1N0 010 294-001 36 with daytime running light/fog light 1 450 g DRL + FF Halogen, H15 E1 2681 ECE R19/ B02 + B03 • • Plug set (accessories) 8JD 162 581-802 36 3-pin 20 1 DRL + PO P21W/LED E1 2586 ECE/SAE Te Li Si Ap p 746 g st Multivoltage Li • W ei 1 t Se ag in g 7 LEDs de 32 Pa rt Pa ck Va ri a nt r Nu m be en ce er 2PT 010 458-851 Re f LEDayFlex Daytime running light with position light 275 g 24 g • 10 g Daytime running lights: LED • • • 12V 750 g DRL LED E1 2344 ECE/SAE • • 12V 750 g DRL+PO LED E1 2344 ECE/SAE • • 12V 815 g • • • • DRL + PO LED E 1 2578 ECE/SAE • • • • Daytime running light with light bulbs 90mm daytime running light with LED position light 2BE 010 102-101 37 with daytime running light/position light Mounting plate (accessories) 9AH 165 968-001 37 Front screw connections 1 Plug set (accessories) 8JD 162 581-802 37 3-pin 20 12V • 10 g 12V 205 g 62 g • • • • • 10g 63 12V 990 g DRL Bulb E1 2529 ECE 1 12V 322 g DRL Bulb E1 2529 ECE 1 12V 322 g DRL Bulb E1 2529 ECE with fixed nozzles 1 12V 1501 g as 8WS 008 549-001, but with longer pipes 1 12V 1513 g 38 with telescopic individual nozzles 1 12V 1489 g 38 with telescopic double nozzles 1 12V 1712 g 38 Ultrasonic headlight range adjustment system with 1 sensor 1 12V 1050 g 12V 205 g P21W/LED E1 2586 ECE/SAE m ou nt Su in r fa g ce m Un ou ive nt in rs g al Fl us h 8XX 010 315-001 ro va l Ultrasonic headlight range adjustment (LWR) Ap p 8WT 008 549-201 m ar k te ch no lo g y 8WT 008 549-101 Headlight cleaning system st Headlight cleaning system Te 38 fu nc tio n 38 8WS 008 549-011 gh tin g 8WS 008 549-001 Headlight cleaning system Li Headlight cleaning system gh tin g with bracket Li with installation frame 37 gh t/u ni t 37 2PT 010 047-211 • Vo lta ge 2PT 010 047-201 Daytime running lights FF40 Se Daytime running lights FF40 Set/ 2 units t ng Daytime running lights set Pa ck ag i Va ri a nt Si de Pa rt 37 W ei un it r Nu m be en ce er 2PT 010 047-821 Re f Daytime running lights FF40 • • • • • • Headlight cleaning systems and ultrasonic headlight range adjustment 60 mm indicator and position lights for front mounting 90 mm indicator 2BE 010 102-001 39 with daytime running light/position light 1 Mounting plate (accessories) 9AH 165 968-001 39 Front screw connections 1 BL + PO 62 g • • • • • Plug set (accessories) 8JD 162 581-802 39 3-pin 20 60 mm Premium lights with clear lens 2BA 009 001-071 39 Indicator with amber bulb 1 12V 10 g 80g BL Bulb E4 6546 ECE • • 60 mm Premium lights with clear lens 2BA 009 001-201 39 Indicator with silver-coloured bulb 1 12V 80g BL Bulb E4 6546 ECE • • Position light, for flush-mounting, with 12 LEDs 2PF 009 001-421 39 Signal colour white 1 12V 65g PO LED E4 12390 ECE • • Position light for installation with bulb 2PF 009 001-081 39 Signal colour white 1 12V 80g PO Bulb E4 7613 ECE/SAE • • Plug set (accessories) 8JD 156 150-807 39 20 10 g 60 mm Premium lights for rear installation 2BA 009 001-431 44 Signal colour amber with failure pulse 1 12V 65g BL LED E4 12390 ECE • • for surface-mounting at the front, 12 V / 3 current consumption approx. 0.25 A 2SB 009 001-401 44 Clear lens 1 12V 65 g SB LED E4 12390 ECE • • for surface-mounting at the front, 12 V / 3 current consumption approx. 0.25 A 2BA 009 001-411 44 Clear lens 1 12V 65 g BL LED E4 12390 ECE • • Macro reflector 8RA 009 001-031 44 red 1 80 g R ECE/SAE • • 60 mm Premium lights with installed bulbs, red lens 2SA 009 001-041 45 Taillight 1 12V 80 g S Bulb E4 12390 ECE • • 60 mm Premium lights with installed bulbs, red lens 2DA 009 001-051 45 Stop light 1 12V 80 g B Bulb E4 12390 ECE • • 60 mm Premium lights with installed bulbs, red lens 2SB 009 001-061 45 Tail-/stoplight 1 12V 80 g SB Bulb E4 12390 ECE • • 60 mm Premium lights with installed bulbs, grey lens 2BA 009 001-001 45 Direction indicator 1 12V 80 g BL Bulb E4 6445 ECE • • 60 mm Premium lights with installed bulbs, with silver bulb 2BA 009 001-191 45 Direction indicator 1 12V 80 g BL Bulb E4 6445 ECE • • Position light, for flush-mounting, with 12 LEDs 64 Ap p Fl us h ro va l m ar k st Te m ou nt Su in r fa g ce m Un ive oun tin rs al g y te ch no lo g n Li Li gh tin g fu nc tio gh tin g gh t/u ni t W ei Vo lta ge un it t Se Pa ck Va ri a nt de Si ag in g r Nu m be Pa rt en ce er Re f still for 60 mm: Premium indicator and position lights 60 mm Premium lights with installed bulbs, red lens 2NE 009 001-021 45 Rear fog light 1 12V 80 g NES Halogen E4 3917 ECE/SAE • • 60 mm Premium lights with installed bulbs, grey lens 2ZR 009 001-011 45 Reversing light 1 12V 80 g ZR Bulb E4 23255 ECE/SAE • • Design ring Ø 71.6 mm 9HB 161 122-012 45 Design ring Ø 71.6 mm high-sheen chrome-plated 1 20 g Design ring Ø 71.6 mm 9HB 161 122-007 45 Design ring Ø 71.6 mm silver 1 20 g Design ring Ø 79.1 mm 9HB 164 168-002 45 Design ring Ø 79.1 mm Premium silver 1 23 g Circular module 2SB 009 362-041 46 Red lens 1 12V 144 g SB LED E4 7747 • • Circular module 2SB 009 362-021 46 Clear lens 1 12V 144 g SB LED E4 7747 • • Circular module 8RA 009 362-001 46 Red lens 1 69 g R E4 3302 • • Circular module (for surface-mounting, light units with identical design) 8XU 009 362-101 46 Red lens 1 140 g • • Circular module (for surface-mounting, light units with identical design) 8XU 009 362-111 46 Clear lens 1 140 g • • • • Combination rearlights Adapter ring screw connection (for mounting frontally or in the circular module) 1 Bulb-based version 9XD 161 119-007 44 black 1 25 g for the attachment of LED lights or the reflector in the circular module 9XD 161 119-017 44 black 1 22 g Design ring Ø 118 mm suitable for circular module 009 362 perfect high-sheen finish with one “click” 9HB 163 085-012 49 Design ring Ø 118 mm high-sheen chrome-plated 1 29 g Design ring Ø 118 mm suitable for circular module 009 362 perfect high-sheen finish with one “click” 9HB 163 085-001 47 silver 1 29 g Combined tail light, stop light, indicator 2SD 009 362-201 47 for rear installation 1 LED safety brake lamp 2DA 959 071-537 47 Red lens 1 12V 120 g CHMSL LED E4 7547 • • LED safety brake lamp 2DA 959 071-037 47 Clear lens 1 12V 120 g CHMSL LED E4 7547 • • Side marker lights set 2PS 008 138-801 49 Side marker lamp set - amber 1 (ME/ VE: 4) • 12V 357 g SML LED E4 9110 ECE/SAE • • Side marker lights set 2PS 008 138-821 49 Side marker lamp set - silver 1 (ME/ VE: 4) • 12V 357 g SML LED E4 9110 ECE/SAE • • Side marker lights set 2PS 008 138-811 49 Side marker lamp set - black 1 (ME/ VE: 4) • 12V 357 g SML LED E4 9110 ECE/SAE • • Side marker lights set 2PS 008 541-801 49 in arrow design 4-unit set • LED auxiliary indicator 2BM 008 771-007 49 for horizontal installation, 1 12V 174 g SBBL LED SAE / DOT Side marker lights and auxiliary indicator 12V 277 g SML Halogen E1 1223 ECE • • 12V 27 g ZBL LED E1 1423 ECE/SAE • • 65 6PV 009 591-011 51 Suspended Pedal 1 5V Intelligent Battery Sensor (IBS) 6PK 010 842-001 51 Intelligent Battery Sensor 1 12V 125 g E1 10R-036177 IBScontrol complete set 6PY 178 103-831 51 Incl. sensor, display (flushmounting variant ) and harness 1 12V 563 g E1 10-035985 Actuator 6NW 009 424-791 51 High Force 1 12V 181 g Actuator 6NW 009 203-421 51 Medium Force 1 12V / 24V 90 g Actuator 6NW 863 330-011 51 Low Force 1 12V 54 g Explanations 66 LB Low beam HB High beam FF Fog light PO Position light DI Direction indicator DRL Daytime running lights CL Cornering light DI Rear indicator SL Stoplight RPO Taillight RF Rear fog light CHMSL High-mounted stop light RR Rear reflectors RL Reverse light SML Side marker light ZBL Auxiliary indicator m ou nt Su in r fa g ce m Un ou ive nt in rs g al Fl us h Ap p m ar k st Te Pedal sensors ro va l y te ch no lo g n Li gh tin g fu nc tio gh tin g Li gh t/u ni t Vo lta ge Se t ng Pa ck ag i Va ri a nt de Si Pa rt W ei un it r Nu m be en ce er Re f HELLA Electronics NOTES 67 HELLA KGaA Hueck & Co. Rixbecker Straße 75 59552 Lippstadt, Germany Tel.: +49 2941 38-0 Fax: +49 2941 38-7133 Internet: www.hella.com HELLA Asia Singapore Pte Ltd Regional Headquarters Asia Pacific Independent Aermarket 2 International Business Park #02-12 The Strategy Singapore 609930 Tel: +65 6854 7300 Fax: +65 6854 7302 E-mail: [email protected] Internet: www.hella.com.sg © HELLA KGaA Hueck & Co., Lippstadt 9Z2 999 131-423 KB/10.11/1.3 Printed in Germany Subject to technical and price modifications.
Similar documents
90 mm modules general overview
* In areas where the ECE-R48 regulation applies, vehicles registered in accordance with ECE-R48, series 05 must incorporate suitable measures to safeguard active failure monitoring of an LED headl...
More information