Lighting - Custom Bikes by Mike

Transcription

Lighting
5
5
For the Dealer Nearest You, Call: 800-729-3332
Lighting
Headlight & Spotlamp Housing Kits
U.S. Design Patent
#D423,126
5
Doss Custom Teardrop Headlight
Housing Kits
Hearken back to the days of yore at the beginning of the Hot Rod phenomenon. At drive-ins
and on dark two-lane blacktop roads all over
America, Rodders would meet to settle the score
on who was fastest, which car was the best looking and which one the girls liked the best. Lots of
those early Hot Rods were pre-war (WWII that is)
Fords with rowdy V-8s and distinctive Teardrop
front headlights. Jump forward to modern twowheel Hot Rods and you can easily imagine the
inspiration for the latest masterpiece by Rick Doss.
It combines the popularity of 1950’s-vintage aluminum headlight housings and the teardrop
shape of the early Ford headlight into one dynamite, bolt-on kit. Special asymmetrical reflector complete with halogen bulb was designed to put light
on the road just where you want it. Complete with all necessary components, brackets and hardware
beautifully chrome-plated and ready to add a distinctive Hot Rod look.
46534 For FL Softail® models from 1986 to present and custom bikes with late FLST front ends .$338.79
46336 For 4-speed FL models 1960 thru 1984 and custom bikes using early FL front ends . . . . . . .$314.59
46334 Retro-fit kit for FL Softail® models already equipped with the original
Doss Headlight Conversion kit (CC #26890) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$261.29
Doss V-Style Spotlamp Brackets
Tired of the ‘sagging hammock’ look of
factory spotlamp brackets? Here’s a V-stylish
alternative!
46654 Fits with Doss teardrop headlight
housing kit (CC #46534) . . . . . . . . . .$81.19
Replacement Parts
46368 Teardrop headlamp assembly
(uses H4 bulb, not included) . . . . . .$59.99
92208 Nacelle trim strip . . . . . . . . . . . . . . . . .$45.99
92163 Chrome outer trim ring . . . . . . . . . . .$39.99
Doss Custom Teardrop Headlight
and Spotlamp Kits
These complete assemblies are the easy way to
add a whole new look to any stocker or custom.
They are complete with a full teardrop headlight
housing conversion with all the hardware, a pair
of matching teardrop spotlamps with built-in
L.E.D. marker lights and a cool V-style spotlamp
mounting bracket. The marker lights can be
wired to flash with your turn signals and as a running light. These Rick Doss designed kits are the
easy and affordable way to make your scoot stick
out in a crowd.
620996 Fits FL Softail® models from 1986
to present and custom builds using
FLST front ends . . . . . . . . . . . . . . . .$605.99
620995 Fits 4-speed FL models from 1960
thru 1984 and any custom using
early style FL front ends . . . . . . . .$614.99
62412 Replacement amber LED turn signal
lamp assembly (sold each) . . . . . . .$14.99
5.02
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Headlight Housings
Apparel
Doss Headlight Conversion Kits for FL Softail® Models
• These are the original kits – still the best and most popular with builders.
Other kits on the market are but poor imitations of Custom Chrome’s
attention to detail, excellent fit and craftsmanship
• Each piece is hand-polished and chrome-plated in the USA
for unmatched quality
Includes the two-piece aluminum head lamp housing, all mounting brackets,
headlight bucket, hardware, chrome slider covers, covers for the lower triple
tree and handlebar risers. Bolts directly to the existing Original Equipment
triple trees.
Bike Kits
& Trailers
26890
Kit For FL Softail® Models
For all Heritage Softail® and Fat Boy® models from 1986 to present (except
FLSTS models). Optional Spotlamp Mounting Bar kit replaces the OEM spotlamp bar on Heritage Softail® Classic models to mount existing spotlamps
and turn signals to the headlight conversion kit.
26890 Headlight housing conversion kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .$519.99
26899 Optional spotlamp mounting bar kit (includes mounting bar,
spacers, spotlamp/turn signal clamps and chrome hardware) . .$65.89
Seats
& Bags
Foot
Controls
Hand
Controls
Replacement Parts
26892 Mounting brackets (sold each) . . . . . . . . . . . . . . . . . . . . .$7.69
26893 FL headlight mount (black) . . . . . . . . . . . . . . . . . . . . . . .$59.99
26894 FL headlight bucket (black) . . . . . . . . . . . . . . . . . . . . . . .$30.49
26895 Chrome riser cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99
26896 Chrome lower triple tree under cover . . . . . . . . . . . . .$39.99
26897 Chrome right slider cover . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
26898 Chrome left slider cover . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
26536 Chrome FL head lamp housing . . . . . . . . . . . . . . . . . . .$289.99
26526 Sealed beam retaining ring . . . . . . . . . . . . . . . . . . . . . . .$25.84
26535 Chrome outer trim ring and seal . . . . . . . . . . . . . . . . . .$22.79
12555 Spotlamp mounting bar ONLY . . . . . . . . . . . . . . . . . . . .$65.59
Lighting
Electrical
Exhaust
Note: Early style windshields and brackets should be used with aluminum
headlight kits.
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Doss Custom 7" Headlights
Innovative design by Rick Doss has interesting raised rib detail on the sides of
the housing to match up with those on the Original Equipment fork tins.
Includes mounting block and hardware for a bolt-on fit to FL Softail® models
from late 1986 to present. Also available in a smooth version to replace the
stock unit.
30120 Ribbed 7" headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99
30121 Smooth 7" headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99
Forks
& Shocks
Sheetmetal
General
5.03
Cross
Reference
Lighting
Headlights
46473
5
Doss Custom Dual Headlight Kits
The easiest way to bolt-on an eye catching custom
look in minutes. 41/2" headlights attach to a
ribbed billet aluminum mounting block with
accents. Kits are available with ribbed or smooth
41/2" dual beam headlights. For 1980 to present
FXST, FXWG and FXDWG models. Includes brackets, mounting blocks and hardware.
46473 Kit with smooth headlights . . . . . . .$216.99
46474 Kit with ribbed headlights . . . . . . . .$244.99
46474
Replacement Parts (sold each)
46475 Headlight mounts . . . . . . . . . . . . . . . . . .$9.79
62018 Headlight bracket . . . . . . . . . . . . . . . .$107.99
26400 41/2" sealed beam . . . . . . . . . . . . . . . . .$13.99
Ness-Tech® Billet Headlights
Ness-Tech® Billet Headlights
Looks sleek and mean. CNC-machined from
6061-T6 billet aluminum. Features an innovative
headlamp retaining system that means no
exposed mounting hardware to spoil the look.
Designed for 53/4" headlight applications. Will
work in most bottom mount applications.
05327 Smooth . . . . . . . . . . . . . . . . . . . . . . . .$299.95
05328 Grooved . . . . . . . . . . . . . . . . . . . . . . .$309.95
Lean, mean looks are just part of the beauty of
this Arlen Ness® design. Top-quality CNC-machined
billet also provides unique engineering that
includes a threaded headlight retaining ring to
eliminate exposed mounting hardware. Halogen
lamp not included.
05966 53/4" smooth . . . . . . . . . . . . . . . . . . . . .$359.90
05967 53/4" grooved . . . . . . . . . . . . . . . . . . . . .$370.00
05968 7" smooth . . . . . . . . . . . . . . . . . . . . . . . .$399.95
05969 7" grooved . . . . . . . . . . . . . . . . . . . . . . .$399.95
Extended Mounting Block
05769 For most Original Equipment
bottom mount triple trees . . . . . . . . .$29.95
Note: Headlight sealed beams not included
5.04
Headlights
Apparel
Bike Kits
& Trailers
08503
31008
31001
Seats
& Bags
Foot
Controls
31005
31004
Hand
Controls
Lighting
31016
31015
31014
Electrical
Custom Bottom Mount Headlight
Assemblies and Headlight Trim Rings
Our 53/4" bottom-mount headlight assemblies feature an
innovative trim ring design with a halogen sealed beam or a
precision-ground, flat lens halogen lamp with a replaceable
55/60 watt bulb. The trim ring is also available separately.
Complete Assemblies with Smooth Rims
08503 With flat lens halogen lamp . . . . . . . . . . . . . . . . . . .$90.99
08505 With halogen sealed beam . . . . . . . . . . . . . . . . . . . .$52.99
31055
31054
Exhaust
Intake
Custom Headlight Rim ONLY
For most bottom or side-mount 53/4" housings.
08501 Smooth rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
Chrome Billet Headlights
by Headwinds™
Engine
Show-quality ‘Classic’ headlights are precision-machined with recessed or visored
retaining rings. Housing designs are
‘Grooved’ with scalloped lines all the way
around the top half of the shell, and
‘Smooth.’ Each unit includes an integrated
3/4" bottom mount.
Gaskets
31050
‘Classic’ Headlights
Smooth
31001
31007
31004
31010
Tranny
& Clutch
Grooved
53/4" with recessed ring . . . .$343.34
7" with recessed ring . . . . . .$408.84
53/4" with visored ring . . . . .$405.79
7" with visored ring . . . . . . .$471.34
31002
31008
31005
31011
53/4" with recessed ring . . .$363.99
7" with recessed ring . . . . . .$457.79
53/4" with visored ring . . . . .$447.34
7" with visored ring . . . . . . .$520.24
Driveline
‘Rocket’ Headlights
The ‘Rocket’ design is similar to the ‘Classic’ smooth, but features a deeper bucket.
31054 53/4" Bradley Rocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$372.44
31055 53/4" Mariah Rocket with visor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$436.99
Wheels,
Tires
& Brakes
‘Tradewinds™’ Headlights
Chrome-plated aluminum headlights that are manufactured offshore to be a lower cost
alternative to the regular Headwinds offerings. They’re precision-machined with recessed
or visored retaining rings. Smooth or grooved styles with integrated 3/4" bottom mount.
Smooth
Grooved
31050 53/4" with recessed ring . . . .$214.99
31052 53/4" with visored ring . . . . .$222.99
31051 53/4" with recessed ring . . .$233.69
Chrome Billet Headlight Mounting Blocks
31013 For custom applications. 3/4" mount with 1" vertical offset . . . . . . . . . . . . . . . .$45.24
31014 For stock-style Wide Glide® triple trees (FXWG, FXST, FXDWG) . . . . . . . . . . . . . .$29.59
31016 For Springer Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.49
31015 For all FL Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.64
Note: Mounting block CC #31015 is required to mount CC #’s 31007 thru 31011 headlights on FL Softail® models.
Frames
Dual Halogen Headlight Kits
Chrome 4" headlight kits include lights, bracket, mounting
blocks and all necessary hardware. They feature replaceable
H4 60/55 watt halogen bulbs and low-wattage daylight
running lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99
27913 Fits Dyna Wide Glide® models from 1993 to present
and FX Softail® models from 2000 to present (except
Deuce™ models)
27914 Fits FX Softail® and 4-speed FXWG models from 1980
to present
Forks
& Shocks
Sheetmetal
General
5.05
Cross
Reference
Lighting
Headlights
5
Custom Teardrop
Headlight
661000
661001
Adds a Hot Rod look to any bike.
Includes teardrop shaped chrome
housing complete with H4 halogen
light and chrome billet mount.
Works in most bottom mount
applications. . . . . . . . . . . . . . . .$239.99
03201 DOT approved headlight
Xenon H.I.D. 7" Headlight
Chrome Headlight Assemblies
Chrome duplicates of the Original Equipment 12-volt headlights.
12499 For Sportster®, FX and FXR models 1975 thru 1989
(repl. OEM 67705-74) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99
12500 For Sportster® models from 1963 thru 1974, and FX
models from 1971 thru 1974 (repl. OEM 67733-72) $41.99
Faithful stock reproductions fitted with 12-volt
quartz halogen or standard sealed beams.
Includes a chrome mounting bracket. Easily
adapted to many universal applications or late
model triple trees for a distinctive classic look.
26477 Complete assembly with quartz
halogen 12-volt sealed beam . . . .$75.99
26473 Complete assembly with standard
12-volt sealed beam . . . . . . . . . . . . .$60.99
7" Headlight Components
The precision of our 7" headlight reproduction
allows use of component parts for restoration.
26466 7" headlight housing . . . . . . . . . . . .$48.29
26463 7" headlight inner ring . . . . . . . . . .$11.69
26464 7" headlight outer ring . . . . . . . . . .$22.14
26491 Headlight bracket . . . . . . . . . . . . . . .$15.49
93146 Retaining clip for rubber seal
(pack of four) . . . . . . . . . . . . . . . . . . . .$4.99
26420 Quartz halogen sealed beam
(12-volt) . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
15089 Standard 6-volt sealed beam . . . . .$10.99
15090 Standard 12-volt sealed beam . . . . .$8.19
High intensity discharge lighting provides unmatched lighting
performance, greatly extended life and resistance to shock
and vibration!
• Features separate bulbs for hi beam and low beam usage,
12V nominal input voltage and service life of approximately 3500 hours
• Special reflector optics utilize a Xenon bulb to produce
four times the light output and ten times the life of conventional headlight!
• Xenon bulb contains no filament which eliminates the
breakage from shock and vibration
• Produces daylight color impression, so items are more
visible and easier to recognize
• Includes waterproof headlight control module to adapt the
headlight to your current lighting system. Module can be
wired to have Xenon light ignite after bike has been started or when ignition switch is turned on
Fits in Most 7" Round Headlamp Housings
(slight modification of headlamp housing
may be required on some models)
661000 H.I.D. headlight kit . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
661001 Mounting ring kit for nacelles . . . . . . . . . . . . . . . . .$99.99
661002 Replacement H.I.D. bulb . . . . . . . . . . . . . . . . . . . . . .$214.99
661003 Replacement H8 high beam bulb . . . . . . . . . . . . . . .$21.99
Custom Chrome® 7"
Headlight Assemblies
Chrome Headlight Housing
for European Countries
Chrome Billet ‘Trim Rim’
Headlamp Assembly
Lean, clean styling in a chromeplated 53/4" headlight assembly
machined from billet aluminum
with an extra-thin rim design.
Includes the mounting block and
sealed beam.
07340 Headlight . . . . . . . . .$161.99
640088 Replacement lamp .$35.70
Permits the use of Custom Chrome® headlight
assemblies with ECE approved inserts in
European countries. Each shell comes with
mounting bracket, outer and inner ring, and
bulb socket. Sold each without inserts.
85004 7" headlight housing ONLY . . . . . .$43.99
Headlight Inserts with TÜV Approval
ECE-approved inserts for all headlights and spotlamps for use in European countries. Available
for right hand traffic also. Units do not include
the bulb. Sold each.
85795 12-volt, H4 unit . . . . . . . . . . . . . . . . .$33.49
85017 12-volt, H4 unit, right hand traffic
only, by Bosch® . . . . . . . . . . . . . . . . .$129.39
Bulb Retainer Spring
85575 Fits H4 inserts for 7" headlight
assemblies . . . . . . . . . . . . . . . . . . . . . . .$6.29
Replacement Parts
12501 Chrome rim set (repl. OEMs 67725-63, 67744-75)
sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.79
12502 Rubber seal only (repl. OEM 67719-63) . . . . . . . . . . . . .$5.79
5.06
Headlights
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
46349
Hand
Controls
46305
46306
Lighting
Doss Headlights
Great choices in custom headlights with distinctive bottom mount housings with 41/2" or 53/4" sealed beams. The
41/2" in the small shell and 53/4" in the large shell have innovative ‘Frenched’ trim rings for a super custom look.
46305 Small ribbed shell, 41/2" headlamp ‘Frenched’ trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
46349 Small ribbed shell, 53/4" headlamp standard trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.99
46306 Large smooth shell, 53/4" headlamp ‘Frenched’ trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99
26400 Replacement 41/2" sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
53/4" Headlights
Show-chrome custom 53/4" headlights are available with side
or bottom mounts. They all have high-beam indicator lights,
and include mounting hardware.
12504 12-volt bottom mount . . . . . . . . . . . . . . . . . . . . . . . . .$34.94
12497 12-volt bottom mount with halogen . . . . . . . . . . .$42.49
12506 12-volt side mount . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.94
Engine
Gaskets
Replacement Parts
12960 Outer chrome ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
12509 Outer ring nut (pack of 10) . . . . . . . . . . . . . . . . . . . . .$6.49
19643 Bottom mount hardware . . . . . . . . . . . . . . . . . . . . . . .$5.99
12520 High-beam bulb (#53) pack of 10 . . . . . . . . . . . . . . .$6.49
Custom Chrome® Headlight and Spotlamp Housings
Chrome-plated headlight and 41/2" spotlamp housings that permit the use
of Custom Chrome® headlight assemblies with ECE approved inserts in
European countries. To properly install the 41/2" spotlamp inserts, you must
also purchase one of the O-ring sets listed separately. Each housing comes
with mounting block, outer and inner ring, bulb socket and blue high-beam
indicator light. Without inserts. Sold each.
Housings ONLY
85033 41/2" headlight housing, bottom mount . . . . . . . . . . . . . . . . . . . . . .$#N/A
85036 53/4" headlight housing, bottom mount . . . . . . . . . . . . . . . . . . . . . .$23.69
85037 53/4" headlight housing, side mount . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
85034 41/2" late-style spotlamp housing . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
Exhaust
Intake
Custom Chrome® Headlight Assemblies
Custom Chrome® 41/2" Mini Lights
Designed for extra lighting on safety bars. Rated at 30 watts
with 10,000 candlepower. 12-volt with high-low beam and
indicator light. Includes swivel stud mounting bracket.
26399 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.49
26400 Replacement 12-volt sealed beam . . . . . . . . . . . . . .$13.99
Electrical
Tranny
& Clutch
12504
12506
Driveline
26399
Parts for Headlight Housings
12960 Chrome outer ring only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
12509 Chrome ring nut only (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
19643 Bottom mounting hardware only . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
Parts for Spotlamp Housings
12481 Spotlamp rim only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99
85022 O-ring set for aftermarket late-style spotlamps
TÜV approved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.49
85021 O-ring set for Original Equipment spotlamps
(TÜV approved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.49
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
5.07
Cross
Reference
Headlights
Halogen 61/2"
Springer-Style
Headlight
Lighting
A modern rendition of the headlight on Springer front ends
from 1936 thru 1954. Highpower 12-volt, 55/100 watt halogen bulb, and heavy-duty mount
with adjustable mounting block
and hardware. Fits all FXWG and
Softail® models (including
Springer Softail® models) from
1980 to present, and any custom
application where a Bates 53/4"
headlight would be used. $103.99
09754 Headlight assembly
Replacement Parts
12541 Headlight lens . . . .$14.79
12542 Headlight trim
ring with screw . . .$14.74
12529 55/100 watt bulb . .$12.99
12527 55/60 watt bulb . . . .$8.64
5
Springer Headlight for Early Models
Exacting 61/2"-diameters replicas of the stock headlamps used
from 1936 thru 1954. Perfect fit of the complete unit, or use
any of the replacement parts for restoration. Chrome or
black-painted finishes with chrome bezels.
Chrome Headlight Assemblies
12537 12-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19
12538 6-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19
Black Headlight Assemblies
12539 12-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19
12540 6-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19
Replacement Parts
12541 Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.79
12542 Headlight trim ring with screw . . . . . . . . . . . . . . . . .$14.74
12545 Headlight lamp reflector . . . . . . . . . . . . . . . . . . . . . .$12.49
12543 12-volt replacement bulb . . . . . . . . . . . . . . . . . . . . . . .$6.49
12544 6-volt replacement bulb . . . . . . . . . . . . . . . . . . . . . . . .$6.49
Note: Will not fit Springer Softail® models from late 1988 thru 2003.
Use CC #09754 instead.
Teardrop Headlight for Big Twins
Chrome teardrop headlight features a smooth contoured retaining ring and a unique
domed shape that enhances the front fork area. Available with standard or high output
halogen sealed beams. Choose from a stock replacement for FXSTS models from 1993 to
present or custom version with Bates style tabs and mounting block for use on FXWG,
FXDWG and Softail® models from 1980 to present.
53/4" for FX Springer Softail® Models from 1993 to Present
330130 Chrome shell assembly (complete less bulb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.49
330132 Headlight assembly with standard sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99
330133 Headlight assembly with halogen sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.54
‘Spearpoint’ Chrome Headlight Housing Kit
Features a ‘Spearpoint’ trim strip that covers the seam on top
of the housings, and includes new die cast aluminum,
chrome-plated housings to replace the polished Original
Equipment parts, as well as a new chrome riser cover. Fits 4speed FL models from 1960 thru 1984. . . . . . . . . . . . . . . . .$299.99
26747 Complete kit
5.08
53/4" for FXDWG, FXST and FXWG Models from 1980 to Present
and FX Springer Softail® Models from 1988 thru 1992
330134 Headlight assembly with standard sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99
330135 Headlight assembly with halogen sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99
330131 Chrome shell assembly (complete less bulb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99
Headlights
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Chrome Billet Headlight Kit
with Tri-Bar Lens Cover
Slightly larger than comparable Tradewinds headlight, this
chrome over billet aluminum beauty has unique features that
set it apart from the crowd. The headlight shell has a Tri-Bar
lens cover that allows the billet look to flow continuous from
front to rear. The lens cover comes with a smooth bezel; an
optional lens cover with a knurled bezel is available for a
more aggressive look. This headlamp also comes to a sharp
point at the rear of the housing, which gives it a more
streamlined appearance. Comes complete with 60/55 watt
H-4 Halogen bulb. Accepts 3/4" mounting post. . . . . . .$328.49
330300 53/4" headlight assembly with smooth bezel
Electrical
Kodlin ‘Elypse’ Hi-Beam Billet Headlight
A show-chromed hi-beam billet headlight assembly from one of Europe’s premier
customizers that breaks new ground in hi-tech styling.
86501 Fits all Wide Glide® front ends from 1980 to present . . . . . . . . . . . . . . . . . . . . . .$779.09
640089 Replacement lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$60.50
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Chrome 4" Halogen Light
with Running Lamp
Frames
Trick, small-diameter light can be used as a headlight or as
an auxiliary light. Great for custom bike builds, especially for
dual light conversions. Features a replaceable H4 60/55 watt
halogen bulb and low wattage daylight running lamp.
Includes chrome hardware for bottom mount
applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.69
27912 Sold each
Forks
& Shocks
‘Snake’ Custom Headlight Unit
Universal gel-coated GFK headlight unit for the ultimate performance look. Approved
and marked with an ‘E1’-mark. Includes 12V, H4 35/35W bulbs, inserts and all mounting
hardware. Ready to sand and paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$432.49
85439 ‘Snake’ headlight unit assembly
Sheetmetal
General
5.09
Cross
Reference
Adjure Headlights
Chrome Headlight Housings by Adjure
Lighting
634006
with
61233
Finish off your ride with these affordable chrome headlight housings. We have 53/4" and 7" diameter housings in smooth and
flamed styles to appeal to any taste, and a wide variety of custom
lamp assemblies for a clean, cool look (see page 5.12 for photos
of lens styles). The lamp assemblies include a standard 55/60 watt
H4 halogen bulb.
634006 Smooth 53/4" housing ONLY . . . . . . . . . . . . . . . . . . . . . .$279.99
634007 Flamed 53/4" housing ONLY . . . . . . . . . . . . . . . . . . . . . .$302.49
634008 Smooth 7" housing ONLY . . . . . . . . . . . . . . . . . . . . . . . .$250.00
634009 Flamed 7" housing ONLY . . . . . . . . . . . . . . . . . . . . . . . .$290.00
53/4" Lamp Assemblies ONLY
61233 Ice-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.95
61235 Trillient style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95
634060 Black Dot Tri-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95
634059 Skull-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95
7" Lamp Assemblies ONLY
15719 Ice-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.54
15721 Trillient style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
634062 Black Dot Tri-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
634061 Skull-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
5
634007
with
61233
Mini Headlight Assemblies by Adjure
These 41/2"-diameter headlight assemblies are DOT-approved
and feature H4 halogen bulbs mounted in our popular ‘Black
Dot Tri-Bar’ lamp assemblies for the ultimate in cool.
634002 Complete headlight assembly
with smooth housing . . . . . . . . . . . . . . . . . . . . . . . .$240.00
634003 Complete headlight assembly
with flamed housing . . . . . . . . . . . . . . . . . . . . . . . .$270.00
634058 Replacement lamp assembly
with H4 halogen bulb . . . . . . . . . . . . . . . . . . . . . . . .$69.95
5.10
Headlights
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
30123
Lighting
Electrical
Exhaust
30124
Intake
CCE Aluminum Headlight with TÜV
Bottom mount aluminum headlight by Custom Chrome® with H3 dual filament bulb. Available in black
or polished aluminum. Sold each.
Engine
686370 Black
686369 Polished
Gaskets
Tranny
& Clutch
12721
85857
Driveline
Custom Scalloped Headlights
Creative designs have built-in visors in the
headlight rim and decorative scallops in the
chrome-plated stamped steel bodies. Bottom
mount brackets are included for most FXWG,
FX Softail® (except FXSTS), and Dyna Wide Glide®
models from 1980 to present as well as many
custom applications. The 61/2" and 53/4" lights
include 55/60 watt H-4 halogen bulbs. Also
available in a 41/2" mini-headlight for use in
dual headlight applications. Sold each.
30123 53/4" headlight . . . . . . . . . . . . . . . . .$114.19
30124 61/2" ‘Springer’ headlight . . . . . . .$134.99
12721 41/2" mini-headlight with 12-volt
hi-lo sealed beam for use in
North American countries . . . . . . .$68.49
85857 41/2" mini-headlight with 12-volt
35/35W Bilux insert for use in
European countries
(TÜV approved) . . . . . . . . . . . . . . . .$115.99
Replacement Parts
26400 Replacement 41/2" 30/30W
sealed beam for CC #12721 . . . . . .$13.99
85019 Replacement 41/2" 35/35W Bilux insert
for CC #85857 (TÜV approved) . . . .$70.39
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
F. Kodlin ‘Mini Square’ Headlight with TÜV
Sheetmetal
After the success of his popular ‘Elypse’ headlight, Fred Kodlin made this new TÜV approved ‘Mini
Square’ version. It comes with two bulbs and the front lens has a blue tint, while the housing is
hand-polished and show chromed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$690.39
686320 Sold each
General
5.11
Cross
Reference
Lighting
Headlamps & Bulbs
5
15073
Halogen Headlamps and Bulbs
Sealed Beams
Fit all Custom Chrome® or Original Equipment
headlight housings. Sold each.
12508 53/4" 12-volt . . . . . . . . . . . . . . . . . . . . .$13.99
26425 53/4" 12-volt halogen . . . . . . . . . . . .$23.94
12507 53/4" 6-volt . . . . . . . . . . . . . . . . . . . . . .$18.49
15089 7" 6-volt . . . . . . . . . . . . . . . . . . . . . . . .$10.99
15090 7" 12-volt . . . . . . . . . . . . . . . . . . . . . . . .$8.19
26420 7" 12-volt halogen . . . . . . . . . . . . . . .$16.99
Dual-filament halogen 55/60 watt H-4 bulb with a
precision-ground lens. 12-volt.
12525 7" (repl. OEM 67755-81T) . . . . . . . . . . . . . . . . . . . . . .$33.25
12526 53/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99
12527 55/60W H-4 halogen bulb only
(repl. OEM 67697-81T) . . . . . . . . . . . . . . . . . . . . . . . . . .$8.64
12529 55/100W H-4 halogen bulb only . . . . . . . . . . . . . . .$12.99
Ice
H3 Halogen Bulbs
Improve the look and the light of
your auxiliary lighting with these
55 watt H3 bulbs. . . . . . . .$0.89 ea.
15073 Gold tint 55 watt H3
halogen bulb (box of 10)
15071 Blue tint 55 watt H3
halogen bulb (box of 10)
Trillient
High Intensity H4 Bulbs
An easy way to improve your night
time visibility with a simple plug-in
upgrade. Sold each.
Skull
Headlight and Spotlamp Inserts
ECE-approved inserts for all headlights and spotlamps for use in European countries. Available
for right hand traffic also. Units do not include
the bulb. Sold each.
For 41/2" Spotlamps and Headlights
85019 12V, 35/35W Bilux unit . . . . . . . . . . .$70.39
85018 12V, H3 Fog Light unit . . . . . . . . . . .$53.09
85020 12V, H3 High Beam unit . . . . . . . . .$54.69
85022 O-ring set for aftermarket
late-style spotlamps . . . . . . . . . . . . . .$5.49
85021 O-ring set for Original Equipment
spotlamps . . . . . . . . . . . . . . . . . . . . . . .$10.49
For 53/4" Headlights
84838 12V, H4 unit . . . . . . . . . . . . . . . . . . . . .$29.99
85016 12,V H4 unit, right hand traffic only,
by Bosch® . . . . . . . . . . . . . . . . . . . . . . .$75.09
For 7" Headlights
85795 12V, H4 unit . . . . . . . . . . . . . . . . . . . . .$33.49
85017 12V, H4 unit, right hand traffic only,
by Bosch® . . . . . . . . . . . . . . . . . . . . . .$129.39
Bulb Retainer Spring
85575 Fits 53/4" and 7" H4 inserts . . . . . . . .$6.29
Black Dot Tri-Bar
‘Jeweled’ Lamp Assemblies by Adjure
Great looks and safer lighting make these DOT approved
lamps a logical upgrade. The 55/60 watt H4 bulb with the
‘diamond cut’ or ‘wave cut’ reflectors deliver powerful illumination. The ‘Ice-style’ has a smooth, clear lens, and is also
available in a ‘Skull’ version. The Trillient-style has a tri-bar
with a blue dot, and the Black Dot Tri-Bar model features a
‘wave cut’ reflector (except 41/2" model).
7" Headlamp Assemblies
Fit all FL Softail®, FLT, FLHT, FLHS and Road King® housings
and CC #’s 26477, 26473 headlights. They’re also perfect for
the Adjure headlight housings elsewhere in this section.
15719 Ice-style with ‘diamond cut’ reflector . . . . . . . . . .$69.54
15721 Trillient style with ‘diamond cut’ reflector . . . . . .$99.95
634062 Black Dot Tri-Bar with ‘wave cut’ reflector . . . . .$99.95
634061 Skull-style with ‘diamond cut’ reflector . . . . . . . .$99.95
53/4" Headlamp Assemblies
Fit all FX, FXR, Sportster® and Dyna Glide models, as well as
any of Custom Chrome’s 53/4" headlight assemblies. They’re
also perfect for the Adjure headlight housings elsewhere in
this section.
61233 Ice-style with ‘diamond cut’ reflector . . . . . . . . . .$59.95
61235 Trillient style with ‘diamond cut’ reflector . . . . . .$77.95
634060 Black dot Tri-bar with ‘wave cut’ reflector . . . . . .$77.95
634059 Skull-style with ‘diamond cut’ reflector . . . . . . . .$77.95
41/2" Headlamp Assemblies
Fits most custom 41/2" mini headlight housings.
634058 Black dot Tri-bar with ‘diamond cut’ reflector . .$69.95
5.12
German Rally Bulbs
Standard replacement bulbs
available with up to 130 watt high
beam output for unbelievable
night time visibility.
15135 55/60 watt . . . . . . . .$16.39
15136 80/100 watt . . . . . . .$16.39
15137 90/100 watt . . . . . . .$14.99
15138 100/130 watt . . . . . .$22.99
Clear Replacement Bulbs
12527 55/60 watt . . . . . . . . .$8.64
12529 55/100 watt . . . . . . .$12.99
Xenon Boosted Bulbs
Xenon boosted bulbs provide a
cleaner, whiter light.
15139 55/60 watt . . . . . . . .$15.39
15125 55/100 watt . . . . . . .$17.54
Gold Multi-Layer
Dichoric Bulb
Gold multilayer dichoric coating
provides a full spectrum color
beam.
15140 55/60 watt . . . . . . . .$25.99
‘Rainbow’ Coated Bulb
Increases visibility in all weather
conditions due to its full-spectrum
glass tint.
15112 55/60 watt . . . . . . . .$19.99
Headlamps & Bulbs
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
‘Diamond Cut’ Halogen Headlight Assembly
Custom Halogen Light Unit
These light units have a replaceable bulb, and have been designed to fit
into any existing 41/2" light assembly with no modifications necessary. Threebladed design gives a nostalgic streamliner look to your current headlight
basket. 12 volt 60/55 watt halogen bulb included. Will now accept a P43T
base halogen bulb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.99
330246 Gloss black center dot. H3-55 watt. Fits all 41/2" OEM and aftermarket shells, including Headwinds and Tradewinds styles
These 7"-diameter sealed beams are designed with high-performance
cyclists in mind. Engineered for both low and high-speed riding, the 55/60
watt halogen bulb projects a strong white beam of light directed by a
unique gemstone-inspired reflector which utilizes a centered reverse
reflector to eliminate the dark center usually associated with halogen
lamps. DOT approved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.94
330231 Fits 7" headlight housings
Electrical
Exhaust
Intake
Replacement Halogen
Spotlamp Sealed Beams
12-volt halogen sealed beams fit
most 41/2"-diameter spotlamp and
mini-light housings, and have
screw terminal wire attachments.
Sold each. . . . . . . . . . . . . . . . . .$16.99
15085 Single beam, 37.5 watt,
70,000 candlepower
(clear non-fluted lens)
15086 Single beam, 50 watt,
110,000 candlepower
(clear non-fluted lens)
Hi-Low Beam Relay
*Note: The high power requirements of
these bulbs may cause excessive drain on
charging systems. May not be legal in
your state, check local regulations before
installation.
Special 12-volt relay allows control of the hi-low
beam from one wire using a momentary (horn
type) button. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.99
17729 Sold each
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
‘Rainbow Strobe’
Lens Cage for H4 Bulbs
Screw Terminal Type
Three-panel filter cage allows motorcycle to be
better seen when driving. For use with headlights with H4 halogen bulbs. . . . . . . . . . . .$29.99
15077 Sold each
Sheetmetal
General
5.13
Cross
Reference
Headlight Housings
Lighting
Headlamp Housing Kit
for FL Models
5
This kit features chrome-plated components
that are accurate reproductions of the polished Original Equipment parts fitted to
most 4-speed FL models from 1960 thru
1984. It is also a natural for customizing any
bike fitted with an early FL-style front end.
Top-quality components make the kit a snap
to install, with all needed hardware and a 7inch halogen sealed beam that’s included.
26531 Fits 4-speed FL models with Original
Equipment or Custom Chrome triple
trees from 1960 thru 1984 (handlebar clamp cover is for non-damper
models) . . . . . . . . . . . . . . . . . . . . .$429.99
Replacement Parts
26536 Set of left and right chrome-plated
housings (repl. OEMs 67847-60,
67848-60) . . . . . . . . . . . . . . . . . . .$289.99
26535 Chrome outer trim ring with
rubber seal and four retaining
clips (repl. OEMs 67712-60A,
67716-60A and 67779-60) . . . . .$22.79
26526 Retaining ring for sealed beam
(repl. OEM 67765-60) . . . . . . . . .$25.84
26893 Inner headlight mount with two
adjusting screws for FL models from 1960 thru 1969
(repl. OEM 67702-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
26894 Outer headlight bucket for FL models from 1960 thru 1984
(repl. OEM 67766-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49
25234 Set of left and right chrome slider covers
(repl. OEM 45964-49T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.59
26537 Chrome handlebar clamp cover for use with steering damper
(repl. OEM 58589-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.49
26538 Chrome handlebar clamp cover for use without steering
damper (repl. OEM 58590-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49
160097 Wiring plug fits all 3 prong headlights, spotlights and custom
driving lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
160095 Adjusting screw (repl. OEM 67767-60) . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99
330071 Top Spring, fits all FL, FLT models 1960 up with 7" headlight
(repl. OEM 67778-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
330072 Bottom Spring, fits all FL, FLT models 1960 up with 7"
headlight (repl. OEM 67780-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
‘Square’ Headlights
‘Wave’ Headlights
Bottom mount headlight with two
H3 12V/55W bulbs. The housings
are hand polished and chromed.
They are E1 approved for high
beam and fog lamp! Measure
152mm x 70.4mm x 60.6mm.
Sold each . . . . . . . . . . . . .Call for price
686772 Blue lens headlight
686774 Clear lens
headlight
5.14
‘Wave’ Headlights
Headlight for bottom or top
mount (long holes) with two H3
12V/55W bulbs. Fit in fairings or
naked bikes. E1 approved for high
beam and fog lamp! Measure
152mm x 70.4mm x 60.6mm.
686775 Clear lens headlight
‘Square’ Headlights
Headlight for bottom or side
mount with two H3 12V/55W
bulbs. Fit in fairings or on naked
bikes. E1 approved for high beam
and fog lamp! Measure 150mm x
51mm x 71mm.
Headlight for bottom or upper
mount with two H3 12V/55W
bulbs. Fit in fairings or on naked
bikes. E1 approved for high beam
and fog lamp! Measure 150mm x
51mm x 71mm.
Spotlamps
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
41/2" Mini Light
Our chrome 41/2" mini light assembly features a
12 volt dual element sealed beam (high/low)
with 10,000 candlepower, adjustable mounting
block, extra long wiring harness and a built-in
high beam indicator. Sold each.
330090 Mini light assembly . . . . . . . . . . . . . .$39.99
330091 Shell ONLY (bulb not included) . . .$22.99
Hand
Controls
Lighting
Chrome Early Style
Spotlamp Assemblies
Chrome reproductions of the early 1938-1961
style spotlamp assemblies. Available with 6 or
12-volt bulb and original style clamp bracket
for 1938-1961 models and custom applications.
These units duplicate the original design with
separate bulb, lens and reflector components
and are ideal for restorations. Replacement
parts are also available and can be interchanged
with original equipment spotlights. Sold each.
12471 Complete assembly with 12-volt bulb
(repl. OEM 68649-64) . . . . . . . . . . . .$40.99
Chrome 41/2" Mini Driving Light
Our chrome 41/2" mini light features a TÜV
approved 12 volt 55 watt bulb, adjustable
mounting block and built-in blue indicator light.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49
330092 Mini light assembly
Replacement Parts
12476 6V bulb (repl. OEM 68715-49) . . . . .$6.49
12477 12V bulb (repl. OEM 68715-64) . . . .$6.49
19239 Turn signal mounting kit – includes
one of CC #’s 19237 and 19238
(repl. OEM 68518-68) . . . . . . . . . . . .$11.59
330102 Clear glass lens ONLY
(repl. OEM 68660-38) . . . . . . . . . . . . .$7.54
330105 Lamp reflector ONLY
(repl. OEM 68676-38) . . . . . . . . . . . .$12.49
Doss Custom Teardrop Spotlights
with Marker Lights
Designed to match perfectly with our teardrop
headlights these new spotlights also work in
OEM applications as well. They use stock style
spotlamps and feature a slick looking L.E.D.
marker lamp built right in below the spotlamp.
The marker light can be wired to flash along
with your turn signals. They mount to to the
OEM spotlight bars on all models and look even
better when used with the custom Doss V-style
spotlight brackets. OEM turn signals will have to
be relocated. Designed by Rick Doss. Sold in
pairs.
62406 Fits all Big Twin models with OEM
type spotlights . . . . . . . . . . . . . . .$199.95
62412 Replacement amber LED turn signal
lamp assembly (sold each) . . . . . .$14.99
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Custom Ribbed 41/2" Mini
Driving Light
These 41/2" mini driving lights are
designed to match our custom ribbed
headlights (see page 5.11).
330190 Mini light with dual filament
halogen bulb . . . . . . . . . . . .$65.99
330196 Chrome shell assembly
(complete less bulb) . . . . . .$55.49
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Custom 31/2" Mini Driving Light
These 31/2" mini driving lights are chromed steel
and come with 12volt, 60/55W halogen bulb.
Available with visor or without visor.
330198 Mini light with visor . . . . . . . . . . . . .$59.99
330199 Replacement lens with reflector .$24.99
Sheetmetal
General
5.15
Cross
Reference
Lighting
Spotlamps & Brackets
5
Doss V-Style Spotlamp Brackets
Tired of the ‘sagging hammock’ look of factory spotlamp brackets? Here’s a V-stylish
alternative designed by master customizer, Rick Doss, that bolts-on quickly and easily to
replace its Original Equipment counterpart. A matching rear turn signal mounting bar
is also available and can be found on page 5.65 of this catalog section! . . . . . . . . . . .$78.49
46632 Fits FL Softail® models from 1986 to present (repl. OEM 58082-87)
46633 Fits all Road King® models from 1994 to present (repl. OEM 68712-94)
46654 Fits with Doss teardrop headlight housing kit (CC #46534)
Doss Custom Teardrop Spotlights
with V-Style Brackets
These exclusive Doss teardrop spotlights offer a great new look to any stock or custom
motorcycle. They feature a teardrop housing with slick built-in L.E.D. marker light that
doubles as an extra turn signal. They use any stock spotlamp and come complete with
the Doss V-style mounting brackets for the ultimate in custom styling.
620999 Fits FLST Softail® models from 1986 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . .$259.95
620998 Fits Road king® models from 1994 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . .$259.95
620997 Fits with Doss teardrop headlight kits 46534, 46336 and 46334 . . . . . . . . . .$259.95
Spotlamps with Custom Housing
and Visor Trim Ring
Easy-to-install custom spotlamps have chrome-plated,
stamped steel housings with decorative scallops and onepiece trim ring with a built-in visor. They use the same sealed
beams as standard spotlamps. Matching 53/4" and 61/2" headlights are available on page 5.11 of this catalog section for a
coordinated custom look. Sold each. . . . . . . . . . . . . . . . . . .$59.99
12744 Fits all spotlamp-equipped models from 1968
to present
Ness-Tech® Radius Spotlight Bars
Curvaceous flowing designs
make this chrome plated billet
aluminum spotlight mounting
bar an eye-catching addition.
Available with or without
super-bright LED turn signals.
They accept Ness-Tech®,
Headwinds, Original
Equipment or our popular
Custom Chrome® spotlights.
Note: Designed as supplemental lighting ONLY, and should not be used to
replace Original Equipment running lights or turn signals.
Fits FLHT and Road King® and FLHTC Models
from 1994 to Present
04910 Bar with LED turn signals . . . . . . . . . . . . . . . . . . . . .$369.95
Fits Heritage Softail® Models from 1986 to Present
04911 Bar with LED turn signals . . . . . . . . . . . . . . . . . . . . .$369.95
Spotlamp Mounting
Brackets
Custom Spotlamp Bracket
by Motherwell Products
Solid steel construction, hand polished
and chromed to a show quality finish.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.49
37476 Fits all FL Softail® models from 1986
to present
5.16
Mount spotlamps or other auxiliary lighting to the front forks.
For FL models 1949 thru 1984
(repl. OEMs 68603-62, 68604-62).
12517 Sold in pairs . .$36.49
Apparel
Bike Kits
& Trailers
Seats
& Bags
15330
Foot
Controls
Trillient
Bullet
Hand
Controls
Black Dot
Lighting
15467
Spotlamp Kits by National Cycle
Add extra lighting capacity to your bike by
installing these kits directly to either the fork
tubes, or the lower triple tree. Includes spotlamps, turn signals and all required hardware
and clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.94
15330 Fits all FX Softail®, Dyna Wide Glide®
and 4-speed FXWG models with 41mm
forks from 1980 to present
15467 Fits all FXR, Sportster® and Dyna Glide
models (except Dyna Wide Glide®
models) from 1988 to present
‘Jeweled’ Spotlamp Lenses
by Adjure
These DOT approved lamps feature halogen H3
35 watt bulbs, and reflectors with ‘diamond cut’
or ‘wave cut’ reflectors to deliver powerful illumination. The ‘Ice-style’ is not shown but has a
smooth, clear lens, but no bulb reflector. All of
the spotlamps will fit most Original Equipment
and aftermarket housings. Sold in pairs.
634054 Ice (diamond-cut reflector) . . . . . . .$89.90
634055 Trillient (diamond-cut reflector) .$129.90
634056 Black Dot Tri-Bar (wave-cut) . . . . .$129.90
634057 Bullet (diamond-cut reflector) . . . .$99.90
Chrome Spotlamp Housings
by Adjure
Finish off your ride with these affordable
chrome 41/2" spotlamp housings that are available in smooth and flamed styles to appeal to
any taste. A wide variety of custom spotlamp
lenses are also available for a clean, cool look
(see elsewhere on this page for photos of lens
styles). Sold each.
634004 Smooth housing ONLY . . . . . . . . . .$149.90
634005 Flamed housing ONLY . . . . . . . . . .$173.40
Spotlamp Lenses (sold in pairs)
634054 Ice (diamond-cut reflector) . . . . . . .$89.90
634055 Trillient (diamond-cut reflector) .$129.90
634056 Black Dot Tri-Bar (wave-cut) . . . . .$129.90
634057 Bullet (diamond-cut reflector) . . . .$99.90
12555
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
12469
Chrome Spotlamp Mounting Bars
Accurate reproductions of the stock bars.
12555 Fits all 4-speed FL models from 1968
thru 1984 (repl. OEM 68780-68) . .$65.59
12469 Fits all FL Softail® models from 1986 to
present (repl. OEM 58082-87) . . . .$63.84
32356 Chrome 17/32" hole plugs
for spotlamp bar (pack of 10) . . . .$10.99
Driveline
Halogen Spotlamps
These are Original Equipment parts. The 35 watt
lamps feature clear lenses and distinctive reflective inner domes for a bright balanced light to
complement your halogen headlight. Fit all
Original Equipment and aftermarket spotlamp
housings from 1968 to present. . . . . . . . . .$132.29
75564 Replaces OEM 68208-98 (sold in pairs)
Universal Toggle Switch
Handles 6 or 12-volt applications up to 35
amps. It was used for the spotlamps on
4-speed FL models from 1962 thru 1984 and
Heritage Softail® Classic models from 1987
to present. . . . . . . . . . . . . . . . . . . . . . . .$6.49
26097 Replaces OEMs 67844-70, 67858-89
Wheels,
Tires
& Brakes
Halogen Spotlamp Sealed Beams
41/2" clear non-fluted 12-volt halogen sealed
beams throw lots more light than the stock
22,000 candlepower and 30 watts.
15085 70,000 candlepower/37.5 watts.
Beam spread is 7° horizontal
and 4° vertical . . . . . . . . . . . . . . . . . . .$16.99
15086 110,000 candlepower/50 watts.
Beam spread is 7° horizontal
and 5° vertical . . . . . . . . . . . . . . . . . . .$16.99
Frames
Note: May cause excessive charging system drain, and may
not be legal in all states.
Sheetmetal
Forks
& Shocks
Chrome Lamp Insert
Classic "Tri-Bar" lamp insert adds a custom look
to spotlights. Chrome steel construction. Bolt on
installation. Sold each. . . . . . . . . . . . . . . . . . . .$15.49
330240 Fits 41/2" spotlamps
General
5.17
Cross
Reference
12485
12483
12480
Lighting
12557
12524
12489
12486
12484
12482
Chrome Spotlamp and Mounting Bar Kits
5
We’ve taken our complete spotlamp assemblies and combined them with
our chrome mounting bars to produce these complete kits. They’re available with or without dual filament turn signals and your choice of four different styles of sealed beams. Each kit includes all required wiring and
connectors and a toggle switch.
Kits with Turn Signals for 4-Speed FL Models 1968 thru 1984
12556 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$169.99
12557 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$204.49
12592 With clear non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . . .$199.99
Kits without Turn Signals for 4-Speed FL Models 1968 thru 1984
Kits with Turn Signals for Heritage Softail® and Fat Boy® Models
12594 With amber non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . .$190.99
Kits without Turn Signals for Heritage Softail® and Fat Boy®
Models from 1986 to Present
Late Model Spotlamps and Sealed Beams
Choose from a variety of chrome-plated reproductions of the late-model
spotlamps with your choice of four different 12-volt sealed beams.
Replacement sealed beams for Original Equipment and aftermarket spotlamps are also available. Mounting clamps available separately. Sold each.
Spotlamp Assemblies
12483 With amber fluted sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.99
12480 With clear fluted sealed beam (repl. OEM 68667-78) . . . . . . . .$34.99
12485 With amber non-fluted sealed beam . . . . . . . . . . . . . . . . . . . . . . .$38.99
12591 With clear non-fluted sealed beam (not shown) . . . . . . . . . . . .$42.49
Replacement Sealed Beams
12482 Fluted amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
12524 Fluted clear (repl. OEM 68674-69) . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
12484 Non-fluted amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
12590 Non-fluted clear (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.64
Replacement Parts
12481 Spotlamp rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99
19238 Spotlamp housing mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . .$5.39
Replacement Parts
12481 Spotlamp rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99
26097 Toggle switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
Chrome 4" Halogen Light with Running Lamp
Universal Headlight Bracket with TÜV Approval
Trick, small-diameter light can be used as a headlight or as an auxiliary
light. Great for custom bike builds, especially for dual light conversions.
Features a replaceable H4 60/55 watt halogen bulb and low wattage
daylight running lamp. Includes chrome hardware for bottom
mount applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.69
27912 Sold each
Polished billet aluminum dual headlight mounting bracket with decorative
grooves for most models and aftermarket triple trees, as well as for many
Japanese cruisers. Tapped with metric threads.
85039 Universal dual headlight bracket . . . . . . . . . . . . . . . . . . . . . . . . . .$122.19
5.18
Headlight Brackets
Apparel
Bike Kits
& Trailers
46921
Seats
& Bags
12519
46923
Foot
Controls
46922
Hand
Controls
12536
46920
Chrome Billet Headlight Brackets
A wide variety of brackets by Custom Cycle Engineering make easy work of mounting headlights to
Custom Cycle Engineering triple trees.
46920 For 53/4" headlight, standard position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.00
46921 For 53/4" headlight, recessed position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.00
46922 For mounting headlight on 1993 thru 2003 Springer models . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.50
46923 For mounting of 7" headlights (also requires CC #26491 bracket, not included) . . . . . . . . . .$52.50
Lighting
Chrome Bottom Mount
Headlight Brackets
Custom brackets for a sharp clean installation.
12519 For Sportster®, FX and FXR models
1971 thru 1987 (except FXLR and
FXRS Sport Edition models) . . . . . .$14.99
12536 Custom bottom-mount bracket fits
all 4-speed FL models 1949 thru 1984
with 53/4" headlight assemblies . .$13.99
Electrical
Exhaust
Intake
Engine
26491
Gaskets
26476
7" Headlight Mounting Brackets
Chrome Headlight Brackets
Universal fit for most 35mm fork tubes. . .$14.39
12516 Sold in pairs
Headlight Lowering Kits
for Springer Softail® Models
Chrome billet mounts from Badlands move the
headlight to the bottom of the Springer shock.
Includes all hardware and acorn nuts to match
the other fastener on the front end. . . . .$119.95
36930 For Springer Softail® models
from 1993 to present
36929 For Springer Softail® models
from 1988 thru 1992
Chrome Headlight
Lowering Bracket
Lowers the headlight 21/2" on
late 1988 thru 1992 Springer
Softail® models. . . . . . . .$53.95
18026 Sold each
Chrome brackets for mounting 7” headlight
assemblies to Wide Glide® front ends.
26476 Fits FX Softail®, Dyna Wide Glide®
and 4-speed FXWG models from
1980 to present . . . . . . . . . . . . . . . . . .$16.99
26491 Fits 4-speed FL models
from 1949 thru 1984
(repl. OEM 67810-48) . . . . . . . . . . . .$15.49
Note: CC #26476 requires removal of lower tree cover, and
drilling and tapping lower tree on models from late 1985
thru 2003.
3/4" Headlight
Mounting Block
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Polished aluminum 3/4"
headlight mounting block
with 3/8"-16 threads for
bottom mount installations.
634010 Sold each . . . . .$7.95
Forks
& Shocks
Universal Headlight Brackets
with TÜV Approval
Sheetmetal
Aluminum mounting brackets for both, single
and dual headlight applications. CNC-machined
from 5mm thick aluminum and highly-polished.
They fit most Original Equipment and aftermarket triple trees. Sold each.
85859 Dual headlight bracket . . . . . . . . . .$67.79
85860 Single headlight bracket . . . . . . . . .$62.59
General
5.19
Cross
Reference
Headlight & Spotlight Visors
BEFORE
Lighting
AFTER
5
‘Frenched’ Headlamp Trim Rings
Customize your stock headlight with these easy to install trim rings and covers. The extended depth adds a distinctive look. Replaces the Original Equipment
trim rings or installs over them depending on model.
15548 Fits FXST, FXSTB, FXSTC, FXLR and Dyna Glide models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99
15549 Fits FXSTS models from 1993 to present, FXSTSB models from 1995 thru 1997, XL1200C and 883C Sportster® models from 1996
thru 2003, FLSTS models from 1997 to present, FXR models from 1999 to present and Softail® Deuce™ models from 2000 to present . . . . . . . . . . . . .$23.99
15550 Fits Sportster® models (except XL1200C and 883C) from 1963 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99
15551 Fits FLSTC, FLSTF and FLSTN models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
15552 Fits FLHT, FLHS and Road King® models from 1983 to present and FLST models with aluminum accessory headlight nacelle
from 1986 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
‘Frenched’ Passing Lamp Trim Rings
Made with the same “frenched” look as the headlamp trim ring covers. Replaces the Original Equipment trim rings and includes
chrome hardware. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99
15547 Fits all models from 1962 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99
Chrome One-Piece Trim Rings with Integral Visors
Improve the look of your bike with these easy to install one-piece trim rings
with integral visors for headlights and spotlamps.
Complete Sets
Includes a trim ring/visor for the headlight and a pair for the spotlamps.
15458 Fits 4-speed FL models with fork tins and late-style spotlamps
from 1949 thru 1959 (includes CC #’s 15453) . . . . . . . . . . . . . . . . . . . . .$63.99
Headlight Trim Ring and Visor (sold each)
15457 Fits most Original Equipment and aftermarket aluminum
headlight housings or single-headlight fiberglass fairings . . . . . . . .$40.09
15453 Fits the 7" headlight on 4-speed FL models from 1949
thru 1959 and Custom Chrome® reproduction headlights . . . . . . . . .$34.99
5.20
Headlight & Spotlight Visors
Apparel
Bike Kits
& Trailers
12620
Seats
& Bags
12621
Foot
Controls
12618
Hand
Controls
30106
Chrome Headlight Visors
Die-cast ‘eyebrows’ include appropriate holes for indicator lights on models
thru 1991.
12618 With four holes for Sportster®, FXR and Dyna Glide models
from 1986 thru 1991 (repl. OEMs 67805-86A, 67863-90) . . . . . .$29.04
12620 With two large indicator light holes (repl. OEM 67809-75) . . .$42.54
12621 Without light holes (repl. OEMs 67809-70, 67805-86) . . . . . . . .$27.10
Lighting
Chrome 7" Headlight Trim Rings with Built-In Visors
These visors look like they were designed in and not added on. Styled to
follow the contours of the headlight housing. These pieces are sure to
Electrical
give your bike a fresh, unique look. Offered in two versions, Smooth Top
or with a Raised Pointed Tip to blend in as a matching highlight on OEM
type 1960 thru 1984 FLH housings. Also looks great on FLHT and FLHS
models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.19
30106 Raised Pointed Tip version for 1960 thru 1984 FLH, CC #26536
Exhaust
housings and 1980 to present FLHT and FLHS models
30107 Smooth Top version for 1960 thru 1984 FLH, CC #26536 housings and
1980 to present FLHT ,FLHS and Road King® models
from 1994 to present (not shown)
Intake
Headlight ‘Eyebrow’
Adapters
‘Eyebrow’ Covers
Riser bolt-mounted adapters make
it easy to use Sportster® or FXRstyle headlight visors (eyebrow)
with a Custom Cycle Engineering
billet triple tree. . . . . . . . . . . .$38.00
46918 For rubber-mount risers
46919 For rigid-mount risers
Chrome-plated, stamped steel
covers for Sportster®, FX, FXR and
Dyna Glide headlight brackets
(eyebrows). Available with or
without cutaway for warning
lamps. . . . . . . . . . . . . . . . . . . . . .$15.24
19641 Without cutaway
19642 With cutaway
Engine
330040
15222
Gaskets
330041
Tranny
& Clutch
15221
330042
Driveline
330032
Headlight Visors
Chrome-plated headlight visors are easily installed on our
7" headlight assemblies (CC #’s 26473, 26477) as well as
53/4" bottom and side mount headlights. . . . . . . . . . . . . . . . . . . . .$7.84
15163 7" headlight visor (repl. OEM 67752-77T)
15190 53/4" headlight visor (repl. OEM 67750-88T)
Wheels,
Tires
& Brakes
Embossed Eagle Visors
These chrome steel visors feature a highly detailed embossed
eagle emblem. Available in choice of all chrome or with gold
accented eagle.
7" Headlight Visors
Fits aluminum or steel FL headlights. Sold each.
15222 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.09
330040 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.97
Chrome Light Visors
Smartly designed and easy to install.
15165 41/2" spotlamp visor. Sold in pairs . . . . . . .$7.99
53/4" Headlight Visors
Fits FX, FXR, XL, and Softail® models with 53/4" headlight.
Sold each.
15221 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
330041 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
41/2" Spotlight Visors
Fits FL, FLT, and Softail® models with 41/2" spotlights.
Sold in pairs.
330032 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49
330042 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
5.21
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Taillight & License Plate Kits
Lighting
47600
Taillight
47618
47610 with
47613 mount
5
‘Fluid Style’ Billet Aluminum LED Taillights
and License Frames by Paul Yaffe Originals®
Ultra bright dual intensity LED taillight and brake light combination with
plate illumination and stepped billet aluminum license frames have hidden
hardware for a clean look. Available in horizontal and vertical mount.
Vertical Mount Light and Frame
47628 Vertical side mount, use CC #’s 47611 thru 47617 chrome
billet aluminum mounts for specific applications . . . . . . . . . . . .$467.99
47611 Axle mount adapter for Softail® models . . . . . . . . . . . . . . . . . . . .$114.99
47612 Primary case mount adapter for Softail® models . . . . . . . . . . . . . .$64.49
47613 1" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49
47614 11/8" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49
47615 Peg mount adapter for Softail® models . . . . . . . . . . . . . . . . . . . . .$121.99
47616 Shock mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.99
47617 Mount adapter for Pro-Street frames . . . . . . . . . . . . . . . . . . . . . . . .$81.99
Horizontal Mount Light and Frame
47629 Horizontal side mount, use CC #47630 chrome billet
aluminum mounts for specific applications . . . . . . . . . . . . . . . . . .$447.99
47630 Axle mount for Softail® models from 1984 thru 1999 . . . . . . . .$142.99
47632 Shock mount for FXR, FXD and Sportster® models . . . . . . . . . . .$114.99
Vertical Taillight/License Mounts
by Paul Yaffe Originals
Hot-looking license plate and Cateye taillight
mount. Add the chrome-billet LED Cateye
47619
taillight for the ultimate look.
47600 LED Cateye taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.99
47610 License plate mount with ‘Cateye’ LED taillight . . . . . . . . . . . . .$393.99
47618 License plate mount with illumination light . . . . . . . . . . . . . . . .$239.99
47619 License plate mount with square LED taillight . . . . . . . . . . . . . .$379.99
47601 License plate mount only with ‘Cateye’ mount . . . . . . . . . . . . . .$179.99
47611 Axle mount adapter for Softail® models . . . . . . . . . . . . . . . . . . . .$114.99
47612 Primary case mount adapter for Softail® models . . . . . . . . . . . . .$64.49
47613 1" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49
47614 11/8" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49
47615 Footpeg mount adapter for Softail® models . . . . . . . . . . . . . . . .$121.99
47616 Shock mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.99
47617 Mount adapter for Pro-Street frames . . . . . . . . . . . . . . . . . . . . . . . .$81.99
Note: Installation of these accessories may be in violation of FMVSS Standard #108
47237
47236
Sidemount License Plate Frames for Softail® Models
Heartland USA™ Billet License Plate Holder
Machined from billet aluminum. Features show quality chrome finish,
hi-intensity LED taillight and channeled wiring. Both versions mount in
place of the outer axle spacer for a clean installation. Fit all 5-speed Softail®
models from 1986 thru 1999. Made in USA. . . . . . . . . . . . . . . . . . . . . . .$379.39
47236 Horizontal mount
47237 Vertical mount
Chrome billet license plate holder comes with a side-mounted LED for a
more modern look and better visibility while riding at night. It attaches to
the footpeg mounting point on the left-side of the bike. Use the 3/8" bolt
adaptor kit for when installing this kit on Softail® models from 2000 to
present.
23571 Complete kit for Softail® models from 1986 thru 1999 . . . . . . .$399.99
23572 Adaptor kit for models from 2000 to present . . . . . . . . . . . . . . . . .$19.99
Note: Installation of this accessory may be in violation of FMVSS Standard #108.
5.22
Taillights & License Plate Kits
‘Radius’ Side Mount Brake Caliper
and Taillight/License Plate Mounts
Contoured to conform to the wheel and brake rotor on the
right-side of your bike for a totally custom look. Chrome billet aluminum caliper mount and license plate frame have hiIntensity LED taillights. Smooth design features hidden
mounting hardware and special channels milled into the
bracket to hide wiring. For use with 18" wheels
ONLY and RevTech® or PM 4-piston calipers and
7"-wide x 4"-tall license plates. . . . . . . . . . .$789.99
47642 For Softail® models from 1986 thru 1999
(right-side mount)
47644 For FXR models 1984 thru 1994 (rightside mount)
47643 For custom rigid frames with 111/2" rear
rotors (right-side mount)
Apparel
Bike Kits
& Trailers
47644
Seats
& Bags
Foot
Controls
47642
Hand
Controls
47642
Universal Taillight/License Plate Mount
Similar to the kits above but without the integral caliper mount. Mounts
to the left-side on most models and clears the 70-tooth belt pulley.
47645 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$789.99
47647 Billet clamp for 1"-diameter frame tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.99
47648 Billet clamp for 11/8"-diameter frame tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.99
Lighting
Electrical
‘The Answer’ LED Oval
Taillight by
Paul Yaffe Originals
Features raw aluminum billet bezel
that is designed for a flawless flush
mount installation. Can be lit with
the outer ring, center ring or both
at the same time! This permits many
turn signal and brake light combinations. Works with hard saddlebags,
fenders and other custom applications. Made in USA. Sold each.
47691 Large Answer LED lamp
(measures approximately
8" x 5") . . . . . . . . . . . .$299.99
47697 Small Answer LED lamp
(measures approximately
4.75" x 3.5") . . . . . . . .$286.99
Note: Bolts must be trimmed for
your application.
Universal Flat Surface
Mount by Paul Yaffe
Originals
Originally designed for the PYO
‘Phantom’ frame because there
wasn’t anywhere to install one
of our traditional sidemount
brackets on such an exotic
frame. Requires two 1/4" x 20
holes to be drilled and tapped
and will work with any of our
vertical sidemounts. Machined
from 6061-T6 billet aluminum
and chrome-plated. Mounting
hardware included. . . . . . .$96.99
600042 Flat surface mount
bracket
Exhaust
Intake
Engine
Gaskets
‘Soon-2B-Copied’ Sidemount License Plate Frame
Sketched on a cocktail napkin during a plane ride home from the Indy
show, Paul Yaffe came up with the most radical sidemount design he had
ever conceived. It’s filled with dozens of super bright LED’s and even has
the exclusive strobing brake light for safety. Works with all PYO vertical
sidemount brackets. Machined from 6061-T6 billet aluminum and then
flawlessly chrome-plated. Mounting brackets sold separately. . . . . . . .$407.99
600041 Sidemount license plate frame
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Laydown Tubing Mounts
An addition to the sidemount bracket collection, this laydown configuration fits 1" or 11/8"-diameter tubing. Created for use on the swingarm section of hardtail or Softail® models, this “drill-and-mount” bracket really
rakes the plate holders to almost parallel to the tube it’s mounted on.
Works great with ‘Soncy’ sidemount or with any Paul Yaffe vertical plate
holders. Requires drilling and tapping of two 1/4" x 20 holes. Machined
from 6061-T6 billet aluminum and then chrome-plated for quality.
600043 For 1" tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99
600044 For 11/8" tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99
5.23
Sheetmetal
General
Cross
Reference
Lighting
05579
86-313
5
Doss Taillight Adaptor Bracket for Deuce™ Models
Chrome adaptor bracket from the mind of master customizer Rick Doss,
will permit you to adapt many of CC’s three hole mounting license
brackets to Deuce™ models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.49
62567 Fits the rear fender of all Deuce™ models from 2000 to present
05627
Note: Recommended for use with the following license brackets; CC #’s 05579, 65255, 86313,
65111 and 47853.
Ness-Tech® ‘Laydown’ License Plate Mount
Recessed to protect your license plate. CNC-machined from 1/4"-thick billet
aluminum. Include the mounting block and all necessary hardware. Fit
most models from 1973 to present (except Touring models, V-Rod® models,
and Big Twin models equipped with Fat Bob rear fenders).
05627 Chrome backing plate without light mount . . . . . . . . . . . . . . . . .$59.95
05579 Chrome backing plate for Cateye taillight . . . . . . . . . . . . . . . . . . .$74.95
Folding Side Mount License Plate Frame
Chrome billet license mount folds out of the way using a unique
spring-loaded mechanism. Mounts to left passenger footpeg. . . . . . .$224.99
28375 Fits Softail® models 1984 thru 2003 or custom mount
Universal Taillight/License
Plate Assembly
611220
240209
Custom License Plate Frames with Taillights
by Choppers Inc.
Unique aluminum license frames with an artistic flair. Manufactured out of
6061-T6 billet aluminum with highly-polished finishes. They feature a
groove behind the tag to hide the wires and are available in a Dice or Iron
Cross design. The milled frame is recessed to accommodate the license plate
while providing a flush seam on the edges. Designed to mount on the
fender or a a side-mount unit. Both styles have license plate illumination
and feature red plastic lens inserts and standard 1157 bulbs.
240209 License plate frame with dice . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$579.99
611220 License plate frame with Iron Cross . . . . . . . . . . . . . . . . . . . . . . . .$429.99
5.24
• Made to mount on the left or right
side of your custom
• Features 11/8" frame tube adaptor
• Bracket mount fits custom
applications only
• Includes taillight
695394 Sold each . . . . . . . . . . . . . .$205.49
Apparel
Bike Kits
& Trailers
Seats
& Bags
12775
Foot
Controls
12760
Hand
Controls
Reverse Detail
46686
Lighting
46685
License Frame
not included
Electrical
12755
Doss Sidemount Taillight and License Plate Bracket
Complete with a Rick Doss designed taillight and hardware, or with provisions for a universal taillight of your choice, this unique design permits a
more stable frame-mounting on either the left or right-side where they
clamp to the swingarm pivot axis tube. They’re available in standard bulb
or LED versions to fit most Softail® models from 1984 to present. The LED
unit features 60 individual LED’s and is substantially brighter than the standard unit.
Exhaust
Intake
For Softail Models from 1984 thru 1999
46685 Complete kit with standard taillight . . . . . . . . . . . . . . . . . . . . . . . .$223.39
46852 Complete kit with LED taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$302.09
46686 Side-mount bracket ONLY for universal taillight . . . . . . . . . . . . .$82.49
®
For Softail® Models from 2000 to Present
99052 Complete kit with standard taillight . . . . . . . . . . . . . . . . . . . . . . . .$223.89
46851 Complete kit with LED taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$295.69
99053 Side-mount bracket ONLY for universal taillight . . . . . . . . . . . . .$82.49
Engine
12757
Gaskets
Tranny
& Clutch
12756
Driveline
Hinged Side-Mount License System
Keep your side-mount license plate from getting knocked off by folding it
closed when parking close to other bikes. Hinge has detents in the open
and closed positions. Your choice of chrome billet backing plates offer the
option of running with side taillight or not.
47335
47356
Chrome Axle-Mount License and Taillight Brackets
These CNC-machined chrome-plated beauties are big and beefy. Verticalmount left-side bracket includes mount for ‘Cateye’ taillight. Horizontal
bracket for the right side. Fit Softail® models 1986 thru 1999.
47356 Complete left-side kit with mount and taillight . . . . . . . . . . .$202.99
47334 Complete left-side kit without taillight . . . . . . . . . . . . . . . . . . .$187.49
47335 Right-side horizontal license mount only . . . . . . . . . . . . . . . . . .$174.99
Hinge Kits
12755 Hinge, bracket and hardware for left or right-side on Softail®
models from 1986 thru 1999 (will not fit with saddlebags) . .$149.95
12756 Hinge and mounting hardware for all models with lower
through-bolt on rear shocks. Mounts on left or right-side . . .$104.95
12757 Universal mounting kit with hinge, hardware and weld-on
frame tab to locate hinge where desired . . . . . . . . . . . . . . . . . . .$109.95
License Backing Plates
Backing plates drilled with dual pattern to mount close to bike or 1"
further out for clearance. Ball milled detail on back, and fit 7" x 4"
license plates.
12760 Backing plate and license plate trim ring for Cateye taillight
(not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.95
12775 Backing plate with license illumination light
with license plate trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$184.95
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
5.25
Cross
Reference
Lighting
Radial
Chrome Billet Extra-Wide
Taillights by Pro-One™
Horizontal
5
Racetrack
Ness-Tech Chrome Taillights
®
Fit all custom 8" and 9"-wide Fat Bob rear
fenders, and are available with or without
built-in amber turn signals. Also feature
license plate lights with frosted lenses.
Measure 65/8"-wide, 3"-tall and 115/16"thick. Sold each.
65527 Without turn signals . . . . .$157.95
65528 With turn signals . . . . . . . . .$162.95
Three unique designs from Arlen Ness® that give your bike a distinctive look. They are all CNC-machined from
billet aluminum and chromed. The ‘Stock’ versions fit the Original Equipment taillight mounts on all fenders
from 1973 thru 1998 as well as on 1999 Softail® models (except FLSTS and models with Fat Bob fenders). The
‘Custom’ versions are for use in all other fender applications. All of the taillights are available with conventional bulb illumination or with LED illumination.
Conventional Taillights
LED Taillights
Regular bulb lighting with 12-volt bulbs and all
Increase your visibility while adding style. Includes
required wiring and hardware. . . . . . . . . . . . . .$219.95
mounting hardware. . . . . . . . . . . . . . . . . . . . . . . . .$299.95
Stock
Custom
Stock
05631 05719 Horizontal design
05632 05718 Radial design
05633 05717 Racetrack design
Custom
05943 05947 Horizontal design
05942 n/a
Radial design
05941 05945 Racetrack design
Note: Installation of these accessories may be in violation of FMVSS Standard #108. 1998 and later models with Original Equipment ’Circuit
Board Taillight’ rear fenders require CC #46642 taillight adaptor bracket.
19375
ZCB Taillight
and License Plate Bracket
This custom assembly has an eye-catching
shape and is made from heavy-duty ABS
plastic to insure it’s durability. The lens
has an ‘E-Mark’ . . . . . . . . . . . . . .Call for price
86313 Bolts to the top of most
custom fenders
87028 Replacement lens
Taillight and Bracket Kits
Easy-to-install kits combine our most popular taillights with
our top-quality custom license plate brackets for a clean,
under-the-fender installation on all FX Softail®, Dyna Wide
Glide® (FXDWG) and 4-speed FXWG models. Kits are also
available for the CC QuickBob™ fender conversion on 4-speed
FX models.
‘Cateye’ Taillight Kits
19756 Fits Fat Bob rear fenders on FX Softail® and
4-speed FXWG models . . . . . . . . . . . . . . . . . . . . . . . . .$56.49
19375 Fits Fat Bob rear fenders on Dyna Wide Glide®
models from 1993 thru 1998 . . . . . . . . . . . . . . . . . . .$77.99
19758 Fits QuickBob™ rear fenders . . . . . . . . . . . . . . . . . . . .$57.99
Note: Installation of these accessories may be in violation of FMVSS
Standard #108.
5.26
RBS License Plate Kit with
Turn Signals and Taillight
with TÜV
Universal aluminum taillight assembly
comes with billet aluminum housing,
license plate and turn signals. Includes an
electronic resistor for brake light circuit.
Has ‘E’ mark on the taillight and turn signal lenses. Available in natural or black
finish.
86636 Polished aluminum kit
with turn signals
86057 Polished aluminum kit
without turn signals
86637 Black aluminum kit
with turn signal
86066 Replacement taillight lens
Apparel
Bike Kits
& Trailers
42925
Seats
& Bags
Foot
Controls
44579
44580
Hand
Controls
Chrome Derby Cover and Sidemount License by Accutronix
A new idea for many Big Twin models, this domed derby cover incorporates a stylish sidemount license
frame ... or vice-versa.
For Big Twin Models from 1999 to Present
For Big Twin Models from Late 1984
44579 Derby cover and license frame . .$249.95
thru 1998
44593 Derby cover and license frame . .$249.95
44580 Derby cover and license frame
with taillight . . . . . . . . . . . . . . . . . . .$419.95
44594 Derby cover and license plate
with taillight . . . . . . . . . . . . . . . . . . .$419.95
Lighting
42927
Electrical
Exhaust
42925
42926
Intake
12284
Engine
42927
Gaskets
15237
Chrome Side Mount
License and Light Mount
The plate holes are 53/4" x 35/8"
center-to-center.
12284 License plate
holder . . . . . . . . . . . . .$9.99
15237 Bracket for side
mount . . . . . . . . . . . . .$6.99
42925
42926
Tranny
& Clutch
Perewitz Side Mount License
Plate Brackets
RST Aluminum Side Mount License Plate
Billet aluminum, axle-mounted, license plate mounting bracket with license plate illumination. Available in black or polished versions.
686535 Polished for Softail® models from 1984 thru 1999
686536 Black for Softail® models from 1984 thru 1999
686537 Polished for Twin Cam 88® Softail® models
686538 Black for Twin Cam 88® Softail® models
A classic custom design has been updated by
custom builder Dave Perewitz for improved
strength and a hot look. Kits include our top
selling chrome-plated die-cast Cateye taillight.
42927 For all 5-speed Softail® models
from 1986 thru 1999 . . . . . . . . . . . .$166.49
42925 For all Dyna Glide models
from 1991 to present . . . . . . . . . . .$172.49
42926 For all FXR models from late
1987 thru 1999 . . . . . . . . . . . . . . . . .$156.99
Driveline
Wheels,
Tires
& Brakes
Frames
Swingarm-Mounted Billet License Plate Bracket
Three-piece design permits mounting on either left or right-side of the swingarm. Will accept
a standard Cateye taillight (not included) or any custom taillight with Cateye bolt pattern. The
backing plate is also available separately. Fit all Softail® models from 1984 to present. . .$149.99
14113 Fits Original Equipment Softail® swingarms (11/4" frame diameter)
14093 Fits 11/8"-diameter aftermarket swingarms
14098 Fits 1"-diameter aftermarket swingarms
Components
14114 License backing plate with Cateye mount ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99
14092 Mount ONLY for 11/8"-diameter swingarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99
5.27
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Lighting
Taillights & Adapters
5
Doss ‘Tombstone’ Taillight Kit
for Late Full-Fender Models
Doss ‘Wide Tombstone’ Taillight
A larger, restyled version of the 1947 thru 1954 Original Equipment taillight
specially-designed to fit the 1973 thru 2003 Original Equipment fenders
and mounts. Turn signals mounted on light bars will need to be relocated.
Includes block off plugs for light bar holes. Fits with stock or universal
laydown license plate brackets.
46400 Fits all models from 1973 thru 1998 as well as 1999 Fat Boy®
and Heritage Softail® models (except FLSTS) . . . . . . . . . . . . . . .$101.69
46409 Fits all Sportster®, Dyna Glide and Touring models from 1999
to present and all Fat Boy® and Heritage Softail® models from
2000 to present (except FLSTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$113.99
46214 Rubber spacer required for use with CC #13199 laydown
license plate kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.19
Hot look for Fat Boy® and other models with
full rear fenders. The adapter bolts to and
covers the stock late-model taillight mount,
while our popular die-cast ‘Tombstone’ taillight bolts to the adapter. Kit includes taillight, heavy-duty chrome-plated stamped
steel adapter, gaskets and hardware. Fits
Fat Boy® models without modification from
1990 to present. Also fits 4-speed FL models,
5-speed FLT, FLHT, FLHS and Road King®
models to present, and Heritage Softail®
models from 1973 to present when turn signals are relocated and turn signal light bar
removed.
19660 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$107.99
Note: Installation of these accessories may be in violation of FMVSS Standard #108. 1999 and
later models with Original Equipment ’Circuit Board Taillight’ rear fenders require CC #46642
taillight adaptor bracket.
Doss Taillight Adapter Bracket
for ‘Circuit Board Taillight’ Rear
Fenders
Tired of being stuck with the stock taillight on your
1998 and newer model, because of the way the
OEM rear fender is made? Well, here’s the fix. The
Doss taillight adapter permits the use of virtually
any custom taillight, such as the Aurora or Doss
wide Tombstone, on 1999 and later models
equipped with ‘circuit board’ taillights.
46642 Taillight adaptor bracket . . . . . . . . . . . . $24.69
5.28
Taillights
Apparel
Aurora™ Taillight and Lighting Accessories
27000
design by john reed
U.S. Design Patent #422,721
27002
27021
• Hot, Custom Look
• Hidden Lens Mounts
• Uses Aurora™ or Original Equipment Turn Signals
An exclusive Custom Chrome® lighting system that blends taillight, stop light
and turning indicators into one gleaming sculpture. Matching front turn
indicators provide a total custom look that makes your bike stand out in a
crowd. Die-cast, chrome-plated taillight is available with or without turn
signals. Fits all models with stock taillight mounts from 1973 to present
(except Fat Bob fenders or late ‘Dresser’ models with stock saddlebags).
Easily adapted to smooth custom fenders.
27000 Complete taillight and turn signal kit with single filament
turn signals and red lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$203.09
27001 Taillight with arms ONLY (uses 1986 to 1998 FXR/Sportster®
model turn signal units) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.09
27002 Taillight assembly without arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
27009 Replacement gasket for taillight lens . . . . . . . . . . . . . . . . . . . . . . . . .$20.59
698564 Replacement ‘thick’ base gasket for CC #27000 . . . . . . . . . . . . . . . . .$9.49
688271 Replacement ‘thin’ base gasket for CC #27000 . . . . . . . . . . . . . . . . .$6.29
27003 Replacement taillight lens for CC #’s 27000 thru 27002 . . . . . . . .$20.19
688273 Replacement lens attachment screw for CC #’s 27000
thru 27003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
27005 Clear Aurora™ taillight lens ONLY for Original Equipment
taillights from 1973 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.49
27004 Red Aurora™ taillight lens ONLY for Original Equipment
taillights from 1973 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Note: 1999 and later models with Original Equipment ’Circuit Board Taillight’ rear fenders
require CC #46642 taillight adaptor bracket.
Aurora™ Turn Signals
The perfect complement to Aurora™ taillights or a great custom look by
themselves. Bolt directly to Original Equipment turn signal stalks from 1973
to present (except FL-style). Twin circuit, two filament bulbs for both running
and turn signals. Sold in pairs.
27020 Aurora™ turn signal set with red lenses . . . . . . . . . . . . . . . . . . . . . . .$84.79
27021 Aurora™ turn signal set with amber lenses . . . . . . . . . . . . . . . . . . . .$84.79
27008 Replacement red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.89
27029 Replacement amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
Aurora™ Marker Light Sets
A perfect match to the Aurora™ line or for a original custom look. Chrome
housing, universal mounting, 12 volt, single filament bulb and lead wire.
Sold in pairs.
27023 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
27024 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99
Replacement Lens
For Aurora™ markerlite sets (CC #’s 27023, 27024) sold each.
27027 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.69
27028 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.89
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
Doss LED Triple Light Kit
Consists of a Doss ‘Wide Tombstone’ taillight (CC #46400) and a set of our
popular LED bullet marker lights (CC #47664). Completely assembled with
the chrome stand-offs already installed. . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.99
62390 Fits all models from 1973 thru 1998 as well as 1999 Softail® models
(except FLSTS and models with Fat Bob fenders)
General
Note: Installation of this accessory may be in violation of FMVSS Standard #108. The marker
lights are designed as supplemental lighting ONLY, and should not be used to replace
Original Equipment running lights or turn signals.
5.29
Cross
Reference
Lighting
Laydown Taillight & License Bracket
09714
09710
5
27376
Laydown License Bracket
for Touring Models
by Darrell Hayes Custom Concepts
‘Laydown’ Taillight Lenses
Maintain your fender’s flowing lines by simply bolting on one of these lenses. They look great
when combined with one of our popular Laydown License Frames, and fit most models from
1973 to present. Installation of the clear lens requires the use of one of our ‘Super Hi-Intensity’
red taillight bulbs.
For all
09710
09818
09714
15141
Models from 1973 thru 1998 and 1999 Softail® Models
Red lens ONLY (replaces OEMs 68034-77, 68033-90) . . . . . . . . . . . . . . . . . . . . . . . . .$26.19
Red ‘Blackout’ lens ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.79
Clear ‘Blackout’ lens ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.79
Super Hi-Intensity red taillight bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99 ea.
For most Models from 1999-Early 2003
Will not fit Deuce™ or FLSTS models. Uses the Original Equipment bulb socket assembly.
27376 Red lens with reflector (replaces OEM 68140-99) . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69
For most Models from Late 2003 to Present
Will not fit Deuce™ or FLSTS models. Mates to the 4-pin AMP connector.
627383 Red lens with reflector (replaces OEM 68369-03) . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
627384 Red ‘Blackout’ lens with reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
Dramatically improve rear styling on Touring models
with the angled license bracket and rear fender brace
assembly. It moves the license plate both closer to the
fender and angles it for a smoother, flowing look
(brackets do not work with luggage rack or oversize
license plates).
Angled License and Rear Fender Brace Assembly
15669 Fits all Touring models from 1997 to present
(repl. OEMs 53422-97, 53376-97) . . . . . . .$107.89
15668 Fits Road King® and FLHS models from 1993
thru 1996; FLT and FLHT models from 1995
thru 1996 (repl. OEM 47400-92) . . . . . . . .$107.89
Replacement Parts
15667 Angled license mounting plate ONLY.
Fits Road King® models from 1997 to
present (repl. OEM 53376-97) . . . . . . . . . . .$48.99
Note: The Original Equipment fender brace is longer than that in the
kits. When installed on the stock brace, the plate extends further to
the rear and larger plates may contact the taillight.
Note: Installation of these accessories may be in violation of FMVSS Standard #108.
‘Laydown’ Taillight Lenses with LED Lights
Do wonders for your bike by adding one of these stylish taillight lenses.
• Combine with a Laydown license frame for a great look
• Most lenses feature ‘blacked-out’ outside walls for a
dimensional look
09723
• Equipped with LED lights and “pig-tail” plug-in
or 4-pin AMP connectors for an easy installation
• Fit most models with Original Equipment taillights
Red
Taillight and
Turn Signal
Bulbs
For all Models from 1973 thru 1998
and 1999 Softail® Models
These lenses plug into the stock taillight bulb socket
(replace OEM 68034-77 and 68033-90 taillight lenses).
09723 Clear ‘Blackout’ lens . . . . . . . . . . . . . . . . . . .$73.99
09728 Red ‘Blackout’ lens . . . . . . . . . . . . . . . . . . . .$73.99
Standard Bulb
Red-coated light
bulb is ideal for use with clear
lenses. 12-volt dual element bulb
replaces 1157R. . . . . . . . . .$3.79 ea.
15184 Box of 10
For most Models from 1999 to Present
These lenses plug into the Original Equipment 4-pin AMP
connector on the fender (replace OEM 68140-99 and
68369-03 taillight lenses).
627380 Red laydown lens . . . . . . . . . . . . . . . . . . . . . .$68.99
627381 Red ‘Blackout’ laydown lens . . . . . . . . . . .$73.99
627382 Clear ‘Blackout’ laydown lens . . . . . . . . . .$73.99
Super High-Intensity Bulb
This red-coated light bulb is recommended for use with our clear
lenses. The 12-volt dual element
bulb is rated at 50/14 candlepower
instead of the standard 32/3 candlepower and replaces
an 1157R. . . . . . . . . . . . . . .$5.99 ea.
15141 Box of 10
Standard #108.
Note: There are two different styles of reflecting patterns on the lenses.
CC #’s 09723 and 09728 have a square reflector pattern.
CC #’s 627380, 627381 and 627382 have a vertical reflector pattern.
5.30
627381
627382
627380
Taillights
12951
Apparel
12950
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Black-Out and Custom Taillight Lenses
Our blacked-out taillight lenses provide a striking new look with smaller
license plate illumination windows. Custom lenses are the same, but without the black-out feature. Fits all models from 1973 thru 1998 as well as
1999 Softail® models (except FLSTS models).
12950 Blackout lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99
12951 Blackout lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
12824 Custom lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99
12825 Custom lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
Replacement LED Taillight Assembly
Hand
Controls
Chrome die-cast taillight assembly comes complete with a high-tech LED
array and all required hardware to replace the Original Equipment unit
fitted to many models since 1973 and in custom applications. . . . . . . .$64.49
46848 Fits all models from 1973 thru 1998 as well as 1999 Softail® models
Lighting
Electrical
Exhaust
Intake
Engine
Diamond LED Taillight for Cateye Mounts
Aurora™ Taillight Lens
An exclusive Custom Chrome look. Matching turn signals and marker lights
are also available elsewhere in this section. Sold each. . . . . . . . . . . . .$18.99
27004 Fits all models with Original Equipment taillights from 1973 thru
1998 as well as 1999 Softail® models (except FLSTS models)
Attractive chrome billet aluminum housing has LED array with two brightness levels for taillight and brake light. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$273.99
47620 Fits standard Cateye mounts
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Original Style Taillight
Chrome reproduction of the Original Equipment part
used on most models from 1955 thru 1972.
12511 Taillight (repl. OEM 68010-64B) . . . . . . . . .$34.49
12952 Red plastic replacement lens . . . . . . . . . . . . .$4.99
26236 Red glass replacement lens . . . . . . . . . . . . .$16.99
12966 Red plastic lens with blue dot . . . . . . . . . . . .$9.49
26237 Red glass lens with blue dot . . . . . . . . . . . .$22.99
12510 White plastic replacement license
plate lamp lens . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19
19481 Lens gasket (pack of 10) . . . . . . . . . . . . . . . .$15.49
19482 Fender gasket (pack of 10) . . . . . . . . . . . . . .$16.99
19773 Chrome 2-hole license bracket . . . . . . . . . .$21.49
19770 Chrome 3-hole license bracket . . . . . . . . . .$19.99
Forks
& Shocks
Maltese Cross II Taillight by Paul Yaffe Originals
If you thought the original Maltese Cross taillight was cool, check out the Maltese Cross II!
Features sequential turn signals in the right and left arms. Mount this taillight on or in your
rear fender and the turn signals are built right in. Superbright LED’s and exclusive PYO strobing brake light along with waterproof solid state circuitry, makes for safety. Machined from
6061-T6 billet aluminum and flawlessly chrome-plated. Steel shadow box
is available for a frenching applications (sold separately).
600046 Maltese cross II taillight with turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$591.99
600079 Flush mount shadow box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99
Sheetmetal
General
Note: Load equalizer for bikes with self-cancelling functions required.
5.31
Cross
Reference
Lighting
Taillights
5
Beehive Taillight
Custom Dual Taillight
Reproduction of the taillight used on many
models from 1939 thru 1946. Universal fender
mounting for most applications. Includes
chrome license mount, black rubber mounting
gasket and 12-volt bulb.
26357 Complete taillight (plastic lens)
replaces OEM 68002-47 . . . . . . . . .$49.69
26358 Plastic red lens . . . . . . . . . . . . . . . . . .$7.99
26359 Plastic clear lens . . . . . . . . . . . . . . . . .$6.49
26360 License bracket . . . . . . . . . . . . . . . . . .$7.99
26361 Mounting gasket (sold each) . . . . .$3.99
Not approved as a license plate light!
85863 Taillight with ‘E’-mark . . . . . . . . . .$83.39
84970 Replacement bulb, 12V21W
(box of 10) . . . . . . . . . . . . . . . . . . . . . .$2.01 ea.
84856 Replacement bulb, 12V5W
(box of 10) . . . . . . . . . . . . . . . . . . . . . .$5.79 ea.
Measures only 60mm diameter and license plate
light, mounted onto a 150mm wide aluminum
plate to fit aftermarket Fat Bob rear fenders.
Note: Limited lens surface area does not meet modern
DOT standards. CC does not recommend these taillights
on vehicles newer than 1954.
LED Taillight Conversion Kit by Adjure
Make sure they notice you with this LED kit that converts your
stock incandescent taillight into a brighter, longer lasting, LED
taillight. It includes a new taillight lens and a 39 LED PC-board
that plugs right into the original bulb socket on models from
1973 thru 2002, or plugs right into taillight connector socket
on models from 2003 to present. Installs in minutes with no
wire splicing.
634063 Fits all models from 1973 thru 2003 and Softail® models from 1973 thru 1999(except FLSTS models) .$99.95
634064 Fits all models from late 2003 to present
(except Deuce™ models) . . . . . . . . . . . . . . . . . . . . . .$107.00
Tombstone Taillight
Superbly crafted chrome die-cast replica of the
taillight used from 1947 thru 1954. Includes a
chrome license mount, black rubber mounting
gasket and 12-volt bulb.
19644 Complete taillight (plastic lens)
replaces OEM 68003-47 . . . . . . . .$33.49
19645 Plastic red lens with gasket . . . . .$5.29
12965 Plastic red lens with blue dot
and gasket . . . . . . . . . . . . . . . . . . . . .$9.49
19670 Plastic clear lens . . . . . . . . . . . . . . . .$4.99
19671 Chrome red lens bezel . . . . . . . . . .$7.99
19654 Fender mounting gasket
(sold each) . . . . . . . . . . . . . . . . . . . . .$3.49
19646 License bracket . . . . . . . . . . . . . . . . .$6.49
19668 Red lens gasket (pack of 10) . . .$10.99
19669 Clear lens gasket (pack of 10) . .$10.99
Note: Limited lens surface area does not meet modern
DOT standards. CC does not recommend these taillights
on vehicles newer than 1954.
Note: Load equalizer not required
686367
Tombstone Taillight with TÜV
686368
LED Mini Taillight with EG ABE
Available either in polished billet aluminum or steel. The aluminum version has two threaded holes on
the back to be mounted directly to the fender. The steel version can be welded onto or into the fender
and then painted. Does not include license plate illumination. Mounting hardware is included. All
parts are sold separately.
686366 LED mini taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.69
686367 Billet aluminum housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$137.39
686368 Steel weld-in housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.59
5.32
A 12-volt replacement for the Original Equipment part that includes the license plate bracket,
hardware and mounting gasket. . . . . . . . . .$66.99
84588 Replaces OEM 68003-47T
Taillights & License Plate Mounts
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
86058
86059
Mini and Micro Cateye Taillights with License Plate Bracket and TÜV
ABS Cateye taillights with aluminum license plate
brackets to mount on the fender. Available in
two sizes. The Micro Cateye measures 65mm
wide x 42mm tall. The Mini Cateye measures
80mm wide x 55mm tall. Made of heavy-duty
ABS plastic to last for years. The taillights are also
available separately in black or chrome.
Chrome Taillight Assemblies
86058 Assembly with micro taillight . . . .$22.79
86059 Assembly with mini taillight . . . . . .$22.79
84985 Micro taillight ONLY . . . . . . . . . . . . .$13.19
19377 Mini taillight ONLY . . . . . . . . . . . . . .$24.49
Hand
Controls
Chrome Taillight Assemblies with TÜV
686601 Assembly with micro taillight
686602 Assembly with mini taillight
686603 Micro taillight ONLY
686604 Mini taillight ONLY
Lighting
Black Taillights with TÜV
686605 Micro taillight ONLY
686606 Mini taillight ONLY
Electrical
47625
Exhaust
47627
Intake
Engine
LED Snake Eye Taillight
Features 60 LED’s for maximum light intensity
inside a durable chrome ABS housing and clear
lens for license plate light. Mounting holes are
spaced at 2" center-to-center using a 1/4"-20
mounting stud. Taillight measures 61/8"-long,
11/2" x 2"-high and 2"-deep. 30" wire harness
with sheathing. . . . . . . . . . . . . . . . . . . . . . . . . . .$97.99
600206 Sold each
340306
19899
Gaskets
Complete Taillight Assemblies
with LED Elements
Include our Custom Chrome® taillights with special high-intensity LED arrays in place of the traditional bulb. Arrays include rear-facing red
LEDs and clear LEDs pointed toward license illumination window.
47625 1955 thru 1972 OEM-style . . . . . . .$144.99
47627 Custom Fat Bob taillight
with chrome bracket . . . . . . . . . . . .$186.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
‘Sparto’ Taillights with TÜV
These early 1950’s “chopper” style taillights
feature die-cast construction and are available
with a 12-volt bulb or a high-output LED. The
taillight is also available with powder coated
black, chrome or polished finishes.
Not DOT approved.
340306 Powder coated black . . . . . . . . . . . .$43.99
19899 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
686599 Chrome with TÜV approval
340308 Polished . . . . . . . . . . . . . . . . . . . . . . . . .$37.99
46847 LED Taillight . . . . . . . . . . . . . . . . . . . . .$52.49
Forks
& Shocks
‘Snake Eye’ Taillight
Wide and sleek custom taillights with a polished
aluminum bracket to mount on all fenders
(except Fat Bob fenders). Made from heavy-duty
chrome ABS plastic. Taillight measures approximately 160mm x 40mm.
86060 Taillight with bracket . . . . . . . . . . . .$27.69
19380 Taillight ONLY . . . . . . . . . . . . . . . . . . .$27.49
686600 Taillight with bracket with TÜV
686607 Taillight ONLY with TÜV
Universal Taillight
Includes 12-volt bulb and mounting screws.
12512 Taillight . . . . . . . . . . . . . . . . . . . . . .$15.49
12513 Lens only . . . . . . . . . . . . . . . . . . . . . .$6.49
12523 Replacement dual filament bulb
(box of 10) . . . . . . . . . . . . . . . . . . . . .$1.55 ea.
Sheetmetal
General
Note: Installation of these accessories may be in violation of
FMVSS Standard #108.
5.33
Cross
Reference
Lighting
5
340466
19939
Oval Taillight Kits with Brackets
for Fat Bob Fenders
Diamond Taillight and License
Bracket Kits
A new look for bikes with Fat Bob fenders is
available in this taillight kit from Custom
Chrome®. Includes the new Oval taillight with
license illumination window and chrome-plated
custom-style bracket. . . . . . . . . . . . . . . . . . .$147.84
19374 Fits Fat Bob fenders on Dyna Wide
Glide® models from 1993 to present
The Diamond taillight is matched with a chrome
fender bracket for these great, easy-to-install
kits. The taillight lens looks great when lit.
Includes license illumination window. Chrome
die-cast construction. . . . . . . . . . . . . . . . . . . . .$63.99
19939 Fits Fat Bob fenders on FX Softail® and
4-speed FXWG models from 1980 to
present. Also fits CC stock replacement
Fat Bob fenders
19941 Fits Fat Bob fenders on Dyna Wide Glide®
models 1993 to present
19940 Fits QuickBob™ fender kits on 4-speed FX
and Sportster® models
Component and Replacement Parts
19372 Oval taillight assembly . . . . . . . . . .$50.99
19371 Replacement red lens with blue
dot ONLY . . . . . . . . . . . . . . . . . . . . . . .$17.49
19905 Bracket for FX Softail® and
4-speed FXWG models
with Fat Bob fenders . . . . . . . . . . . .$56.09
19370 Bracket for Dyna Wide Glide®
models . . . . . . . . . . . . . . . . . . . . . . . . .$61.69
Component and Replacement Parts
19884 Diamond taillight assembly
(Cateye mount) . . . . . . . . . . . . . . . . .$33.49
19938 Replacement red lens . . . . . . . . . . . . .$6.49
19757 Bracket for FX Softail® and 4-speed FXWG
models with Fat Bob fenders . . . . .$40.99
models . . . . . . . . . . . . . . . . . . . . . . . . . .$61.69
19759 QuickBob™ mounting bracket . . . .$45.49
340466
Custom Taillight/Turn Signal
Contoured to fit bobtail fenders on FXST and
FXWG models 1980 to present (except newer
models with “circuit board” taillight), this custom taillight features a unique lighting system
which incorporates both the brake light and
turn signals into one unit. It also features a slotted lens cover for a truly custom look. Bracket
sold separately, Uses common light bulbs.
340466 Taillight/turn signal assembly . . .$105.99
Mini Cateye Taillight
Snake Eye Taillight Kits
for Fat Bob Fenders
Unique variation of the classic Cateye design.
The wide design will set your bike apart at any
stoplight. Available in conventional and LED versions. Made of heavy-duty, chromed ABS plastic
to last for years. Mounting holes are spaced at
2" center-to-center using a 1/4"-20 mounting
stud.
FMVSS Standard #108
Taillights with Brackets
19381 For FX Softail® and 4-speed FXWG
models from 1980 to present . . . .$57.99
647530 Same as CC #19381 but with LED
taillight . . . . . . . . . . . . . . . . . . . . . . . .$133.20
19382 For CC QuickBob fenders on FX
4-speed models . . . . . . . . . . . . . . . . . .$59.49
Replacement Parts
19380 Taillight ONLY . . . . . . . . . . . . . . . . . . .$27.49
19364 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
19363 Lens gaskets (pack of 10) . . . . . . .$1.25 ea.
5.34
Unique variation of the classic
Cateye design. The design will set
your bike apart at any stoplight.
Made of heavy-duty, chromed ABS
plastic. Mounting holes are spaced
at 2" center-to-center using a
1/4"-20 mounting stud.
19377 Taillight ONLY . . . . .$24.49
Replacement Parts
19366 Red lens . . . . . . . . . . . .$5.79
19365 Lens gaskets
(pack of 10) . . . . .$1.25 ea.
Apparel
Bike Kits
& Trailers
19900
Seats
& Bags
Foot
Controls
19762
85861
Hand
Controls
Custom Taillight
and Bracket Kits
for Fat Bob Fenders
Lighting
Fills the entire area on most
Fat Bob rear fenders, (except
Dyna Wide Glide® models) and is
available with a chrome Original
Equipment-style bracket or a
chrome-plated custom bracket.
Fit FX Softail® and 4-speed FXWG
models with Fat Bob rear fenders
19907
from 1980 to present, and CC #’s
26433, 13206 and 13204 Fat Bob
rear fenders.
19900 Kit with Original Equipment-style bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
19907 Kit with custom bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.49
19903 Red lens with jeweled blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
Electrical
340305
Exhaust
Intake
Replacement Parts
19904 Taillight assembly ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.99
19902 Original Equipment-style bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
19905 Custom bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.09
19901 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
Engine
86061
Cateye Taillights with TÜV
Flush Mount
Teardrop Taillights
Add smooth, street-rod styling to
your custom fender installation
with this clever design. The available recessed teardrop bucket
makes installation easy.
65307 Taillight with
red lens . . . . . . . . . .$47.95
65308 Taillight with
blue dot lens . . . . .$52.95
65309 Bucket for
mounting
taillights . . . . . . . . .$29.95
Gaskets
The most popular taillight on the market with TÜV approval!
Available with chrome-plated die-cast or black anodized aluminum housings, 12 volt bulb, and built-in license plate illumination. Mounting studs are spaced 2"
center-to-center for a variety of applications. Sold each.
19762 Chrome die-cast taillight . . . . . . . . . . . . . . . . . . . . . .$27.49
340305 Chrome die-cast taillight with blue dot lens . . .$27.49
85861 Chrome die-cast taillight with TÜV . . . . . . . . . . . .$29.99
86061 Black-anodized aluminum taillight with TÜV .$205.79
12522 Replacement bulb for CC #19762 (box of 10) .$1.10 ea.
12968 Red lens with jeweled blue-dot . . . . . . . . . . . . . . . . .$10.99
19763 Replacement red lens for CC #19762 . . . . . . . . . . .$7.99
19764 Replacement white license plate lens . . . . . . . . . .$4.99
Note: Check available clearance between
tire and fender before mounting. Depth
can be trimmed slightly.
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
Extra-Wide Fat Bob Taillight by Pro-One™
Extra-wide taillight fits most brackets for 8" to 9"-wide
Fat Bob rear fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.95
65474 Sold each
5.35
General
Cross
Reference
Lighting
Taillights
‘Speed’ LED Mini Taillight
with E-Mark
New taillight for 2004. Includes brake and taillight and license plate illumination in a chromed
ABS plastic housing.
686823 ‘Speed’ LED
Mini Taillight . . . . . . . . . . . . . . .Call for price
LED Mini Taillight
with E-Mark
New taillight for 2004. Includes brake and taillight with aluminum housing, but does not have
license plate illumination . . . . . . . . . . .Call for price
686822 Chrome housing
686820 Polished housing
686821 Matt black housing
5
Horizontal
Taillight ONLY
Angled Fender
Mount Taillight
Ness-Tech® Cateye Taillights
Ultra-slim, chrome billet taillights measure a paltry 1"-thick. They have top grooves for license plate
illumination, and are available with or without a custom mount for smooth rear fenders. The taillights
ONLY may be mounted on any flat surface and have the same bolt pattern as regular Cateye taillights.
All taillights are available with conventional bulb illumination or with LED illumination.
Late Taillight
Original-style taillight for all models from 1973
thru 1998 as well as 1999 Softail® models (except
FLSTS and models with Fat Bob fenders).
26100 Taillight (repl. OEM 68008-73A) . .$37.99
26110 Replacement lens . . . . . . . . . . . . . . . . .$6.49
12962 Taillight lens with blue dot . . . . . . .$15.49
09700 Lens trim ring . . . . . . . . . . . . . . . . . . .$15.49
09699 Chevron grill . . . . . . . . . . . . . . . . . . . .$14.84
09695 Chevron grill with red plastic
lens and blue dot installed . . . . . . .$25.94
19483 Fender mounting gasket
(pack of 10) . . . . . . . . . . . . . . . . . . . . . .$9.99
19770 3-hole license bracket . . . . . . . . . . . .$19.99
Replacement Parts for Late Taillights
26039 Lens screws (repl. OEM 68026-73)
pack of 10 . . . . . . . . . . . . . . . . . . . . . . . .$9.99
26040 Lens gaskets (repl. OEM 68025-73)
pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$27.49
26041 Mounting speed nuts
(repl. OEM 7501) pack of 10 . . . . . . .$4.84
FMVSS Standard #108. 1998 and later models with Original
Equipment ’Circuit Board Taillight’ rear fenders require
CC #46642 taillight adaptor bracket.
Conventional Taillights
Regular bulb lighting with 12-volt bulbs and all required wiring and hardware.
Angled
Horizontal
05659 05660 Taillight with mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.95
05661 05662 Taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.95
LED Taillights
Increase your visibility while adding style. Includes mounting hardware.
Angled
Horizontal
05863 05864 Taillight with mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.95
05861 05862 Taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.95
Replacement Parts
These items are for the Conventional Taillights.
05239 10 watt and 5 watt bulb kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
05238 Replacement lens kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.95
Maltese Cross Taillight
Custom Oval Taillight
for Fat Bob Fenders
Fits Custom Chrome® Fat Bob brackets for
custom taillights. Or create a custom mount
for other applications. Includes license illumination window and 12-volt bulb.
19372 Taillight assembly . . . . . . . . . . .$50.99
19371 Replacement red lens ONLY
with blue dot element . . . . . .$17.49
19371
19372
5.36
Complete with 12-volt bulb. Universal mount.
19649 Taillight . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
19650 Lens only . . . . . . . . . . . . . . . . . . . . . . . . .$5.79
Chrome Fender Brackets
19905 Bracket for FX Softail®
and FXWG models with
Fat Bob fenders . . . . . . . . . . . . .$56.09
models . . . . . . . . . . . . . . . . . . . . .$61.69
Taillights
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
High-Visibility Taillight by Velocity Motorcycle
The Velocity taillight uses Ultra Bright LED technology to increase your
visibility and safety. These LED's were developed specifically for use in
taillights, and emit light at a specific wavelength that is not “washed out”
by light from the sun. This taillight has superior performance to LED
upgrades in existing taillights. Unlike stock style lenses designed for single
bulb “point” source lighting, the Velocity taillight lens is designed to utilize
the LED array for maximum effect. Estimated 100,000-hour bulb life.
Die cast chrome plated construction, includes built in license plate light.
Not DOT approved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99
340400 Fits all models 1973 to present
Lighting
Electrical
Bullet Style Universal Taillight
This die-cast metal taillight assembly has the look and feel of the heavy
chrome accessories of years past. Chrome plated and featuring thick rubber Exhaust
mounting gaskets. Custom mounting required, universal mounting hardware included. All use standard 1157 dual filament bulbs, and have plastic
lenses. Not D.O.T. approved.
Universal taillight uses a custom base and license plate bracket to transform
a turn-signal housing and lens into a unique taillight assembly. The red lens Intake
features a clear window at the bottom for license plate illumination.
340480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
Engine
Gaskets
Tranny
& Clutch
Driveline
’Lucas’ Taillight
with TÜV
The TÜV-approved version
includes a chrome license
mounting bracket.
86205 Taillight assembly
with TÜV (chrome bracket) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.24
84866 Taillight assembly without TÜV (polished bracket) . . . . . . . . . . . .$25.79
19647 Taillight ONLY without TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99
86206 Replacement lens with TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.29
19648 Replacement lens without TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
12959 Lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
85874 Replacement lens gasket only (sold each) . . . . . . . . . . . . . . . . . . . . .$2.49
Wheels,
Tires
& Brakes
‘39’ Style Taillight with L.E.D.
Frames
Take a trip down memory lane by adding a
classic touch of 1939.
• Great match with 39’ style marker lights
(CC #27042, page 5.65)
• Equipped with red L.E.D.’s
• Fits most Harley-Davidson® models from 1973
thru 1998 with OEM style fender and models
from 1999 to present with (CC #46642) adapter
bracket (except Fatbob fenders)
27040 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$107.89
Forks
& Shocks
Sheetmetal
General
5.37
Cross
Reference
Lighting
Taillight Covers & Visors
5
Louvered Taillight Visor by KüryAkyn™
Louvered and chrome-plated visor is made of a durable composite
material. It fits the late-style taillight on all models from 1973 thru
1998 as well as 1999 Softail® models (except FLSTS and models with
Fat Bob fenders). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
48021 Chrome taillight visor
Chrome Die-Cast Cateye Taillight Cover
Die-cast chrome grill that fits over the existing lens for an easy instant
custom look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.99
78504 Sold each
Taillight Visor
Fits all Harley® models from 1973 to present (except FXWG and FXST).
340276 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
Chrome Visor
for Tombstone Taillight
Precision-formed steel visor installs in minutes
and is held firmly in place between the lens
and the bezel. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
15179 Fits all Tombstone taillights
Note: Installation of this accessory may violate FMVSS Standard #108
330043
Turn Signal Visors
Fits FL style turn signals from 1963 thru 1984. Sold in pairs.
330043 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
Fits front FLHT and FLST models from 1986 to present. Sold in pairs.
330035 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.34
330045 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
5.38
Taillight Covers & Visors
Apparel
Bike Kits
& Trailers
15164
15165
Seats
& Bags
Foot
Controls
15166
15167
Inferno Taillight Trim Kit
Includes precision laser-cut stainless steel Inferno insert, clear
lens cover and chrome-plate trim ring for a hot look.
09720 Fits stock-style taillights on all models from 1973 thru
1998 as well as 1999 Softail® models (except FLSTS
and models with Fat Bob fenders) . . . . . . . . . . . .$45.49
09722 Replacement clear lens cover . . . . . . . . . . . . . . . . . . .$6.49
Hand
Controls
Chrome Light Visors
Smartly designed and easy-to-install chrome visors for most models.
15164 Taillight visor for 1955 thru 1972 taillights (repl. OEM 68014-88T)
sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
15165 Spotlamp visor (repl. OEM 67783-78T) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
15166 Bullet light visor – 13/4" (repl. OEM 67785-78T) sold in pairs . . . . . . . . . . . . . . . . .$2.59
Turn Signal Visors
Sold in pairs.
15175 Fits the front of FLHT, FLHTC, FLHS, Road King® and FLSTC models
from 1986 to present (repl. OEM 67734-88T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.04
15176 Fits the front of FLTC 1988 thru 2003; rear on FLTC, FLHT, FLHTC,
FLHS, Road King®, FLST, FLSTC, FXRD and FXRT models 1986
to present (repl. OEM 67737-88T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.54
15167 Fits the front of all 4- and 5-speed FL and FLHT models from
1963 thru 1985 or the rear of all 4-speed FL and 5-speed FXRT
models from 1963 thru 1985 (repl. OEM 67786-86T) . . . . . . . . . . . . . . . . . . . . . . . .$6.79
Lighting
Electrical
Exhaust
Intake
Engine
15222
Gaskets
Chrome Skull Taillight Cover
Dress-up your ‘Tombstone’ taillight with one of these beautiful chrome-plated die-cast covers. give your Tombstone the
‘Skull’ treatment (taillight not included). . . . . . . . . . . . . . .$36.49
98649 Skull cover
Tranny
& Clutch
15220
Note: Cover will not fit stock ‘Tombstone’ taillight on FLSTS models.
Installation of these accessories may be in violation of FMVSS Standard #108.
Driveline
Wheels,
Tires
& Brakes
15223
15221
Frames
‘Live To Ride’ Embossed Visors
Chrome Taillight Visors
Features a cut-out for license plate illumination. Fits the
late-style taillight on all models from 1973 thru 1998 as well
as 1999 Softail® models (except FLSTS and models with Fat
Bob fenders). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.59
12299 Plain (replaces OEM 68006-83T)
Chrome-plated steel visors feature an embossed eagle carrying a banner which says
‘Live to Ride’.
15220 Taillight visor for all models from 1973 thru 1998 as well as 1999
Softail® models (except FLSTS and models with Fat Bob fenders) . . . . . . . . . .$13.19
15221 Headlight visor for all 53/4" bottom and side-mount headlights . . . . . . . . . . . . .$9.49
15222 Headlight visor for 7" headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.09
15223 Turn signal visors for the front of all 4- and 5-speed FL and FLHT
models from 1963 thru 1985 or the rear of all 4-speed FL and
5-speed FXRT models from 1963 thru 1985 (sold in pairs) . . . . . . . . . . . . . . . . . .$11.29
5.39
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Lighting
License Plate Frames
Ness-Tech® Radius License Frame
Curved lines give a great modern look. Does not
expose mounting hardware. CNC-machined
from 6061-T6 billet and finished in chrome. Full
radius frames will work for most license plate
installations. Sold each. . . . . . . . . . . . . . . . . . .$49.95
05580 Fits 7"-wide x 4"-tall license plates
5
Polished ‘Skull’ License Plate Frame
Deluxe Chrome License Plate Frame
Three-dimensional die-cast frame with emblem
and border design. Fits license plates that measure 7" x 4" with plate hole dimensions measuring 53/4" x 23/4". . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.64
19760 Sold each
Sand cast in aluminum from a hand-carved mold
and polished, this frame has impressive detail.
Fits the standard 7" x 4" license plate used in
most states. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.79
37857 Sold each
Ness-Tech® License Frames
with Lights
BackOFF® LED
License Plate Frame
Loaded with 16 dual circuit LED’s, this license
plate frame doubles as auxiliary running and
brake lights. Simple three wire, color-coded
installation takes only minutes. Ultra-bright
LED’s have a 20,000 hour life span. Fits license
plates up to 73/16" x 41/4". . . . . . . . . . . . . . . . .$58.94
240195 Sold each
‘Whiskers’ Marker Lights
Custom License Plate Frames with Lights
Milled from 6061 billet aluminum. Available
with vertical marker lights (shown) or
with the lenses in horizontal orientation
(backing plate and hardware not included).
36921 ‘Whiskers’ license plate kit
with vertical lenses (shown) . . . . .$139.95
36945 ‘Whiskers’ license plate kit
with horizontal lenses . . . . . . . . . . .$139.95
05867 Replacement halogen bulb (5 watt)
sold each . . . . . . . . . . . . . . . . . . . . . . . .$10.99
12890 Replacement halogen bulb (10 watt)
sold each . . . . . . . . . . . . . . . . . . . . . . . .$10.49
Chrome-plated billet license frames with custom
built-in marker lights. The light mounting surface machined at a 45° angle for side visibility.
Fit standard plates (7" x 4"). . . . . . . . . . . .$119.95
05208 Amber
05210 Red
Note: Marker lights designed to be used as supplemental
lighting only.
Replacement Parts
Sold each.
05215 Amber replacement lens . . . . . . . . .$3.94
05214 Red replacement lens . . . . . . . . . . . .$3.94
05216 Replacement light bulb . . . . . . . . . .$1.95
Note: Use as supplemental lighting only. Not to replace stock
running lights or turn signals.
Chrome License Plate Trim Kit
This chrome license plate frame measures
71/4" x 41/4". Mounting holes measure
53/4" x 23/4" center-to-center. . . . . . . . . . . . .$15.49
240136 License plate trim set (includes frame,
backing plate and mounting screw set)
Ace Metal License Plate Frames
Chrome License Bracket
by Pro-One™
License Mounting Screws
240130 Mounting screw set. Includes 4 screws,
acorn nuts and washers . . . . . . . . . . .$4.19
5.40
Billet bracket mounts the license plate to
the left-side upper and lower belt guard tabs
of most Softail® frames. Can be used with
all standard three hole fender mount
license frames. . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95
65468 Billet license bracket
Jewelry-grade conchos decorate these CNCmachined billet aluminum parts. The Iron Cross
and 8-Ball are glossy baked ceramic on a heavy
metal base. The 3-D Skull is a polished nickel
casting with a dark background. Each concho is
handmade in the USA. Sold each. . . . . . .$71.99
06050 3-D Skull
06051 8-Ball
06052 Iron Cross (not available in Europe)
License Plate Frames
Apparel
Bike Kits
& Trailers
623401
18935
18936
Seats
& Bags
Foot
Controls
623400
Hand
Controls
19106
19105
Polished ‘Skull’ Chain Link and Maltese Cross
Plate Frame
Sand cast in aluminum from a hand-carved mold and polished, this frame
has impressive detail. Fits the standard 7" x 4" license plate used in most
states. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.14
623400 Chain Link
623401 Maltese Cross (not available in Europe)
Lighting
‘Live To Ride’ License Plate Frames
These frames match our other ‘Live To Ride’ covers, and fit most license
plates measuring 7"-wide x 4"-tall whose mounting hole dimensions are
53/4" x 23/4".
18935 Chrome ‘Eagle Spirit’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99
19105 Chrome ‘Live To Ride’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.59
18936 Gold ‘Eagle Spirit’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99
19106 Gold ‘Live To Ride’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.14
19157
Electrical
Exhaust
Intake
19155
Engine
Gaskets
Doss License
Plate Frames
Hot looking design by
master-customizer Rick
Doss. Chrome-plated die-cast
construction for 7"-wide x 4"-tall license
plates. Frame only or with license plate illumination
light to keep the law looking elsewhere. Includes chrome hardware.
46056 Frame with illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49
46055 Frame without light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.89
Eagle License Plate Frames
Feature soaring eagles at the base of these die-cast frames. They fit license
plates measuring 7"-wide x 4"-tall whose mounting hole dimensions are
53/4" x 23/4".
19157 Chrome and gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.49
19155 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99
Note: These frames may not be compatible with the license bracket on 5-speed FLT, FLHT, FLHS
and Road King® models, or with CC #’s 13199, 14199 custom license brackets.
Chrome-plated billet frames fit the most common
7" x 4" license plates and come complete with stainless
mounting screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.95
65066 Ball milled
65067 Smooth
Chrome-plated license frame has a
unique feature ... a scrolling text message that lights up in red LEDs. It
comes with a programmable remote
that can store up to four different
messages, and at the click of a button,
can upload one of the messages to the
license frame display. The message
lights up in full when when your
brakes are first applied, and scrolls
your message after they’re released.
Fits all models with license plates that
measure 7" x 4" (except Road King®
and ‘Touring’ models). . . . . . . . .$240.70
699991 Complete kit
Driveline
Wheels,
Tires
& Brakes
StreetWavez™
Programmable License
Plate Frame
Chrome License Plate Frames by Pro-One™
Tranny
& Clutch
Frames
Forks
& Shocks
Sheetmetal
General
5.41
Cross
Reference
License Plate Frames & Accessories
Lighting
13682
5
13684
Motorcycle License Plate Frames
‘Fluid Stepped’ License
Frames with L.E.D.’s
• Designed with sharp pointed
corners along with a ‘fluid
stepped’ pattern, giving the
ultimate custom touch
• Made of CNC-machined billet
aluminum and chrome-plated
• Features a strip of white
L.E.D.’s for both horizontal and
vertical plates
• Both plates measure 7" x 4"
• Fits motorcycle license plates
measuring 7" x 4"
• Sold each
600024 Vertical plate with 3" L.E.D. strip . . . . . . . . . . . . .$229.99
600025 Horizontal plate with 6" L.E.D. strip . . . . . . . . . .$243.89
Inspection Tag Bracket
Provides a place to display inspection tags required by many states
including Virginia. Attaches under
the front axle nut. . . . . . . . . .$17.99
20310 Fits most models
American-made frames for license plates measuring 7"-wide x 4"-tall whose mounting hole
dimensions are 53/4" x 23/4". . . . . . . . . . . . . .$15.99
13682 Chain
13684 Twisted
Chrome License Plate
Bolt Kit
Kit includes four buttonhead bolts,
nylon-inserted lock nuts, washers
and wrench. . . . . . . . . . . . . . . . .$6.29
19768 Complete kit
License Plate Reflectors
19885
15954
They measure 3/4" across the face and are ideal
for mounting license plates. A 5/8"-long stud
with a tension spring and wing nut holds the
plate firmly in place.
19778 Blue (display tub of 150) . . . . . . . . .$63.24
19780 Blue (display tub of 40) . . . . . . . . . .$16.89
19779 Red (display tub of 150) . . . . . . . . . .$63.24
19781 Red (display tub of 40) . . . . . . . . . . .$16.89
85159
36024
Chrome License Plate Accessories
19496
85023
Backing Plate
19885 Fits plates measuring 7"-wide x 4"-tall
whose hole dimensions are 53/4" x 23/4" . . . . . . . .$7.14
Plate Frame
15954 Fits plates measuring 7"-wide x 4"-tall
whose hole dimensions are 53/4" x 23/4" . . . . . . . .$5.49
Colony Chrome Mounting Hardware Kit
Features rubber insulators to eliminate vibration.
36024 Stove bolt-style with acorn nuts
for all slotted brackets . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
72065 Flathead sockethead screws with
countersunk washers and locknuts . . . . . . . . . . . . . .$9.99
72066 Buttonhead sockethead screws
with flat washers and locknuts . . . . . . . . . . . . . . . . .$4.99
5.42
19495
Billet Aluminum ‘Documate’
This handy unit mounts on the back of your
license plate bracket to hold registration, insurance forms, and any other important documents
you need while on the road. Includes knurled
end caps with water resistant O-rings. Available
in laydown or upright styles. . . . . . . . . . . . . .$61.49
19495 Fits ‘Upright’ license brackets
19496 Fits ‘Laydown’ license brackets
Custom Mini
License Plate Lights
CNC-machined from aluminum
with plain or grooved caps. Ideal
for side-mounted license plate
brackets or for bikes with limited
space. These units won’t rust and
resist vibration due to the highstrength material. Includes a bulb,
wire and mounting hardware.
Sold each.
85023 Plain . . . . . . . . . . . . . .$38.39
85159 Grooved . . . . . . . . . .$42.09
License Plate Kits & Brackets w/Lights
Apparel
Bike Kits
& Trailers
Seats
& Bags
LED License Plate with
Clear Lens
Foot
Controls
Chrome plated die cast aluminum
frame features brilliant red LED
stop/tail light with a clear lens,
designed to have a white look
when not in use. Also features
license plate illumination. Not DOT
approved. . . . . . . . . . . . . . . . . . . .$65.99
240095 Sold each
Chrome Pro-Fat License Bracket
by Pro-One
Ness-Tech® Light/License Plate Kit
Chrome-plated backing plate is machined from billet aluminum to accept most custom taillights. The 30° bend permits
installation onto almost all custom rear fenders.
84377 Includes a rubber mounting block
$173.99
Made of chrome-plated steel, this extra-wide
plate holder fits 81/2" and 9" Fat Bob fenders.
Has mounting points for CC #65474 custom
Fat Bob taillight. . . . . . . . . . . . . . . . . . . . . . . . .$109.99
65428 For 81/2"-wide fenders
65424 For 9"-wide fenders
Hand
Controls
Lighting
Electrical
340470
28376
Exhaust
License Plate Illumination
Small chrome billet light mounts
to upper belt guard tab to
illuminate the license
plate mount. . . . . . . . . . . . . . . .$72.99
28376 Fits Softail® models 1984 to
present or custom mount
Intake
240213
240212
Donnie Smith Signature Series Taillights
Designed exclusively for Custom Chrome by Hall of Fame bike
builder - Donnie Smith, this side-mount taillight has a unique
eyebrow shaped lens and concealed license plate retainer system. The high-output, high-intensity LED design consumes
less power, lasts longer and outperforms most conventional
bulbs. Chrome billet construction. Available in vertical or
horizontal versions. Fits left side on Softail® models from
1987 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99
240212 Horizontal
240213 Vertical
Engine
Taillight/License Plate
Side Mount Kits
Universal style brackets available for side mount.
The kit works for either right or left side mount- Gaskets
ing. Works with Lucas or universal style taillight.
340470 Bracket kit with Lucas style light . .$42.99
340341 Bracket kit ONLY . . . . . . . . . . . . . . . . .$29.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Side Mount Taillight
Universal side mount bracket
made in the USA by National
Cycle. Each kit includes a DOT
approved 12-volt taillight. . .$53.99
19888 Complete kit
Frames
Forks
& Shocks
Taillight Brackets
for Fat Bob Fenders
License Plate Frame With Marker Lights
Chrome license plate frame is made of precision die-cast aluminum and features integrated vertical marker lights. Amber
lenses with single filament 12 volt bulbs can be wired as
marker lights or turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
240176 Sold each
Accurate reproductions of the Original Equipment brackets fitted to Softail® and 4-speed
FXWG models with Fat Bob fenders from 1980
to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.84
26494 Chrome (replaces OEM 59993-80TA)
Sheetmetal
General
5.43
Cross
Reference
Lighting
License Plate Mounts & Accessories
5
13199
14199
Chrome Cover for Rubber License
Plate Frame Wedge
Covers the rubber mounting wedge on one of
Custom Chrome’s all-time favorite accessories –
the adjustable ‘Laydown’ license plates.
Available in rounded or more square-cornered
versions to fit either version of the rubber
mounting block.
14200 Rounded-corner cover . . . . . . . . . . . .$9.19
14201 Square-corner cover . . . . . . . . . . . . . .$9.49
Chrome ‘Laydown’ License Plate Mounts
Close-fitting, one-piece chrome-plated license plate mounts which can be used to replace the multipiece license plate mount and bracket on the rear fender. Two rubber spacers isolate the license plate
from vibration, and permit the mount to be tailored to the profile of the fender for a much tighter,
cleaner look. They mount directly to the standard hole pattern on all rear fenders (except Fat Bob)
from 1955 to present and come complete with mounting hardware.
13199 Original-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.49
14199 Pyramid-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99
Replacement Spacers
13299 Set of replacement rubber isolation spacers. One each flat and wedge style . . . . . . . . . . . . .$6.49
Chrome Louvered
License Backing Plate
For license plates that measure 7" x 4" with
plate hole dimensions measuring 53/4" x 23/4".
The ideal companion to our louvered coil covers
and battery covers. . . . . . . . . . . . . . . . . . . . .$12.49
19889 Replaces OEM 59899-88T
Chrome License Bracket
Curved Chrome ‘Laydown’ License Plate Mount
Curvaceous cousin to our popular CC #13199, the original laydown license mount. Not only can this
mount be angled to the profile of the fender, it also follows the radius, for a tighter, cleaner look.
Fits most models Includes hardware and rubber isolation spacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
14205 Curved ‘laydown’ license plate bracket
5.44
Chrome reproductions of the license plate
brackets for most models from 1955 to
present. Available in both two or three
hole versions. . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
19773 Replaces OEM 59995-55 (early 2-hole)
19770 Replaces OEM 59983-75 (late 3-hole)
License Plate Mounts & Accessories
Arlen Ness® ‘Alternative’
License Plate Accessories
Chrome plated. die-cast construction with an
attractive price. Features hidden mounting
hardware and may be used individually or with
custom laydown backing plate. Radius design
blends the license frame and backing plate
together as one unit. Laydown backing plates
mount directly to all Original Equipment fenders
from 1973 to present (except Fat Bob fenders).
Mounting hardware is included.
05425 Stepped license frame . . . . . . . . . .$46.35
05426 Stepped backing plate . . . . . . . . . .$52.20
05427 Grooved license frame . . . . . . . . . .$46.35
05428 Grooved backing plate . . . . . . . . .$52.20
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
05426
05427
Hand
Controls
Lighting
Electrical
Exhaust
05773
Intake
Engine
05774
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
05774
05775
Frames
Ness-Tech ‘Radius’ License Frame and Mounts
®
The master’s touch is evident in this simple yet elegant design. Chrome-plated billet frame works with most backing plates. To complete the look, add one of
the chrome billet backing plates with mounting block. The backing plate with light mount is angled for better light visibility.
Forks
05773 License frame for small plates used in most states . . . . . . . . . . . .$49.95
05775 Backing plate with angled mount for Cateye taillight . . . . . . .$109.95
& Shocks
05774 Backing plate without light mount . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
Sheetmetal
General
5.45
Cross
Reference
Lighting
Turn Signals
Late Model Turn Signal Assemblies
5
Replace damaged Original Equipment turn signals or quickly change over from amber to red lenses
with these top-quality replacement parts.
LED Conversion Turn Signal
Lamp Assemblies by Adjure
Don’t get burned up by burned out bulbs! These
DOT approved LED lamps last up to 8 times
longer than conventional bulbs, burn cool and
draw only a fraction as much energy from the
charging system. They’re available in single element versions for use as turn signals only, or
dual element for use as a running lamp and turn
signal. Fit the flat turn signal housings on most
FLT, FLHT, FLHS, Road King® and FL Softail® models from 1986 to present. Sold in pairs. . .$159.99
61222 Amber turn signal
330535 Red turn signal/running lamp
Note: These assemblies require the additional purchase and
installation of a “load equalizer” for proper operation.
Front Turn Signal Assemblies
Dual filament turn signal units for most models
from 1986 thru 2001. May also be used on the
rear of the motorcycle for increased visibility.
Sold each.
26143 Amber lamp unit without threads
(repl. OEM 68404-86) . . . . . . . . . . . . . .$12.24
26144 Amber lamp unit with threads
(repl. OEM 68406-86) . . . . . . . . . . . . . .$12.24
26635 Red lamp unit with threads . . . . . . . .$12.69
Rear Turn Signal Assemblies
Single filament turn signal units for most models
from 1986 thru 2001. All four versions are the
same with threads in the body, but some have
an additional hole to route the turn signal wire
through. Sold each.
19590 Amber lamp unit with wiring hole
(repl. OEM 68407-86) . . . . . . . . . . . . . .$12.24
19591 Red lamp unit with wiring hole . . . .$12.69
19592 Amber lamp unit w/o wiring hole
(repl. OEM 68410-87B) . . . . . . . . . . . .$12.24
19593 Red lamp unit w/o wiring hole . . . . .$12.69
Replacement Parts
12522 Dual filament bulbs (repl. OEM 68168-89) box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.09 ea.
12547 Single filament bulbs (repl. OEM 68572-64B) box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.47 ea.
15126 Lens O-rings (repl. OEM 68455-86) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.29
26131 Amber lens ONLY (repl. OEM 68457-86) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.64
26132 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.89
22221 Amber lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89
22967 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89
Late ‘Touring’ Model Turn Signal Assemblies
19115
19114
5.46
Single and dual filament 12-volt turn signal units for most
models from 1986 to present.
19114 Dual filament assembly (repl. OEM 68400-86) . . . .$22.99
19115 Single filament assembly (repl. OEM 68402-86) . .$22.99
Replacement Parts
26124 Amber lens (repl. OEM 68440-86) sold each . . . . . . .$1.64
15123 Amber lens with blue dot (sold in pairs) . . . . . . . . .$16.99
26126 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.09
12969 Red lens with blue dot (sold in pairs) . . . . . . . . . . . .$19.99
12522 Dual filament bulb (box of 10)
repl. OEM 68168-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.09 ea.
12547 Single filament bulb (box of 10)
repl. OEM 68572-64B . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.47 ea.
15150 Lens O-rings (repl. OEM 68451-86) pack of 10 . . . . .$4.99
Turn Signals & Kits
Apparel
Red Taillight and Turn Signal Bulbs
Standard Bulb
Red-coated light bulb is ideal for use with clear lenses.
12-volt dual element bulb replaces 1157R. . . .$3.79 ea.
15184 Box of 10
Bike Kits
& Trailers
75749
This red-coated light bulb is recommended for use with
our clear lenses. The 12-volt dual element bulb is rated
at 50/14 candlepower instead of the standard 32/3 candlepower and replaces an 1157R. . . . . . . . . . . . .$5.99 ea.
15141 Box of 10
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
75750
Electrical
Exhaust
Intake
Bullet-Style Turn Signal Kits
Super Bulb
High intensity stop and taillight bulb has nearly 100% greater illumination.
Long life and vibration resistance from triple-wound double filament.
12-volt. Replaces #’s 1034 and 1157.
12530 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
12531 Pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
These are Original Equipment parts. These bullet lights are styled like those
fitted to Deuce™ models and add the perfect touch of style to your bike!
Chrome reflector-optic signals include housing, lenses and supports. Kits
include four lights with mounts and required hardware.
75750 Fits FX Softail® models from 2000 to present, Sportster®
models from 1990 thru 2003 and all Dyna Glide models
from 1991 to present (replaces OEM 68005-99) . . . . . . . . . . . . .$233.99
75749 Fits all FX Softail® models from 1988 thru 1999
(replaces OEM 68007-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$206.99
Engine
Gaskets
Tranny
& Clutch
Note: May be unsuitable for installations with limited clearance with plastic lenses.
Driveline
Wheels,
Tires
& Brakes
19093
26149
Frames
26154
Early Model FL
Turn Signal Assemblies
19092
Forks
& Shocks
Early Model Turn Signal Assemblies
Dual filament 12-volt turn signal assemblies for
most FL models from 1963 thru 1985. Sold each.
19092 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99
19093 Amber (repl. OEM 68557-70A) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.64
Replacement Parts
15127 Red lens ONLY (sold each) repl. OEM 68570-63 . . . . . . . . . . . . . .$1.99
15128 Amber lens ONLY (sold each) repl. OEM 68571-63 . . . . . . . . . . .$4.99
19098 Dual filament bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.49 ea.
12964 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . .$15.49
Single filament replacement turn signal units for FX, FXR and Sportster
models from 1973 thru 1985.
26154 Amber lamp unit with threads (repl. OEM 68514-73) . . . . . . .$12.94
Sheet26122 Amber lamp unit without threads (repl. OEM 68515-77A) . .$11.84
metal
26155 Amber lens ONLY (sold each) repl. OEM 68483-73 . . . . . . . . . . .$1.49
26149 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.64
12963 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . .$19.99
12547 Replacement bulb (box of 10) repl. OEM 68572-64B . . . . . . . . .$1.47 ea. General
15160 Replacement gaskets (pack of 10) repl. OEM 68481-73 . . . . . .$10.94
®
5.47
Cross
Reference
Turn Signals & Kits
Lighting
330787
5
15107
15120
330778
‘Flat-Style’ Turn Signal Lens Kits
Stylish kits are easy to install and available with four amber lenses or two amber
and two red lenses. Complete with a heavy-duty flasher unit and special bulbs which are shorter overall than stock to clear the lenses. Kits for models from 1986 thru 2001 include two dual filament bulbs
for the front to retain running lights. Fit all Sportster®, FX, FXR, Dyna Glide and Softail® models from
1973 thru 2001 (except FXRD, FXRT, FLSTC and FLSTN).
Complete Lens Kits
Include lenses, bulbs and flasher. . . . . . . . . .$22.99
1973-85
1986-01
15099 15100 Amber only
15119 15120 Amber and red
Replacement Lenses
Replacement lenses (sold each) . . . . . . . . . . . .$4.99
1973-85
1986-01
15117 15115 Amber
15118 15116 Red
Replacement Bulbs
15114 Single filament (box of 10) . . . .$1.29 ea
12523 Dual filament (box of 10) . . . . .$1.54 ea
Replacement Flasher Unit
25205 Sold each (repl. OEM 68541-64A) . .$4.99
Complete Lens Kits with Blue Dot Lenses
Include lenses with Blue Dots, bulbs and flasher
for all models from 1986 thru 2001. . . . . . .$31.94
15106 Amber only
15107 Amber and red
Replacement Lenses
Replacement blue dot lens (sold in pairs) .$16.99
15110 Amber
15111 Red
Replacement Bulbs
15114 Single filament (box of 10) . . . .$1.29 ea
12523 Dual filament (box of 10) . . . . .$1.54 ea
330777
2000-Up Signal Lights for Deuce™
Models by Chris Products
Direct replacement turn signal light for the
Softail Deuce™ model (FXSTD). This sleek new
design works with 1973 to present style mounting hardware and can be used on most motorcycles. Available for front or rear. Sold each.
330787 Front. Dual filament with amber
lens (wires exit behind
mounting hole) . . . . . . . . . . . . . . .$18.89
330788 Rear. Dual filament with amber
lens (wires exit through
mounting hole) . . . . . . . . . . . . . . .$18.89
Replacement Lenses
Sold each.
330776 Amber . . . . . . . . . . . . . . . . . . . . . . . .$2.39
330777 Red . . . . . . . . . . . . . . . . . . . . . . . . . .$1.34
330778 Clear . . . . . . . . . . . . . . . . . . . . . . . . .$3.89
Replacement Flasher Unit
25205 Sold each (repl. OEM 68541-64A) . .$4.99
Flat Lens Turn Signal Kit
by Chris Products
Features a completely re-designed chrome housing that uses standard full-size turn signal bulbs
instead of the miniature bulbs found in other
flat lens kits. Fit most Harley-Davidson¨ models
from 1986 thru 2001. . . . . . . . . . . . . . . . . . . . .$68.49
19597 Complete kit with two single filament
and two dual filament lamp units
Complete Turn Signal Kits
Great kit for building bikes from the ground up. Includes all clamps and support hardware to mount
turn signal housings to handlebars and fender struts. One kit features late-model (1986 thru 2001)
housings and amber lenses with dual-filament bulbs for the front and rear. The other has early-model
(1973 thru 1985) housings and amber lenses with single-filament bulbs. Both include a pair of red
lenses as a bonus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.54
26148 Kit with late lamp units and dual-filament bulbs (1986-up)
26147 Kit with early lamp units and single-filament bulbs (1973-1985)
5.48
Replacement Parts
19595 Single filament lamp unit
with threads (sold each) . . . . . . . . .$17.24
19596 Dual filament lamp unit
with threads (sold each) . . . . . . . . .$17.24
15128 Amber lens ONLY (sold each) . . . . . .$4.99
15127 Red lens ONLY (sold each) . . . . . . . . .$1.99
Turn Signal Lenses & Caps
Apparel
Bike Kits
& Trailers
Bullet Turn Signal
Lenses by
Motor City Cycle
16017
16024
16029
16030
Seats
& Bags
Replace those boring lenses
with these cool units. Clear
lenses look great when used
Foot
with clear, amber, or red bulbs.
Front and rear chrome flames flow Controls
in the proper direction.
Sold in pairs.
Hand
Controls
Clear Turn Signal Lenses
These clear lenses change the look of the turn
signals completely. When used in conjunction
with amber bulbs the turn signal looks orange
when lit. Sold each.
Clear lens for Original Equipment turn signal
units on FL models from 1963 thru 1985
and CC #’s 19092 and 19093.
15157 Replaces OEM 68571-63 . . . . . . . . . . .$5.49
Clear lens for Original Equipment turn signal
units on FLT, FLHT, FLHS and Road King® models
from 1986 thru 2003 and CC #’s 19114,19115.
15158 Replaces OEM 68440-86 . . . . . . . . . . .$5.49
Fit Original Equipment turn signal units on FLT,
FLHT, FLHS and Road King® models from 1986 to
present, and CC turn signals #19114 and #19115.
16013 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
16029 Clear with flames, front only . . . . . . .$59.99
16030 Clear with flames, rear only . . . . . . .$59.99
16017 Amber with flames, front only . . .$59.99
16018 Amber with flames, rear only . . . . . . .$59.99
16024 Red with flames, rear only . . . . . . .$59.99
Fit Original Equipment turn signal units on most
Sportster®, FXR, Dyna Glide and FX Softail® models from 1986 thru 2001.
16012 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
16027 Clear with flames, front only . . . . .$59.99
16028 Clear with flames, rear only . . . . . .$59.99
16016 Amber with flames, rear only . . . .$59.99
Lighting
Electrical
Exhaust
Fit Original Equipment turn signal units on FL
models from 1963 thru 1985, and CC turn signals
#19092 and 19093
16014 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
16031 Clear with flames, front only . . . . .$59.99
16032 Clear with flames, rear only . . . . . .$59.99
16020 Amber with flames, rear only . . . .$59.99
Intake
Engine
Clear lens for all FXR, Sportster® and Dyna Glide
models from 1986 thru 2001.
15168 Replaces OEM 68457-86 . . . . . . . . . . .$4.34
15198 Single element amber bulb
(1156NA) box of 10 . . . . . . . . . . .$1.99 ea
15199 Dual element amber bulb
(1157NA) box of 10 . . . . . . . . . . .$0.78 ea
Gaskets
Tranny
& Clutch
Driveline
16040
16036
Wheels,
Tires
& Brakes
Frames
Bullet Turn Signal Lenses for Deuce Signal Lights by Motor City Cycle
Replace your stock turn signal lenses with these stylish bullet lenses. Available with silver front-facing
flames for both front and rear with a choice of either clear, red or amber lenses. Fits Deuce™ models
from 2000 to present, and all models with snap-in lenses from 2002 to present. Sold in pairs.
Chrome Front Turn Signal
by Chris Products
Turn signal features a clear lens includes a
dual filament amber bulb. Fits FLT, FLHT,
FLHS and Road King® models from 1986 to
present (replaces OEM 68400-86). . . . . .$21.99
19894 Sold each
Front Lenses ONLY with Flames
16039 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49
16040 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49
Rear Lenses ONLY with Flames
16036 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49
16037 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49
16038 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49
Front or Rear Lenses without Flames
16033 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
16034 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
16035 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
Forks
& Shocks
Sheetmetal
General
5.49
Cross
Reference
Turn Signal Accessories
TM
Lighting
09707
‘Mirage®’ Turn Signal Grills with Lenses
•
•
•
•
•
•
5
09709
Chrome-plated die-cast zinc grills
Decorative black painted slots
Special flat lenses to enhance styling
Includes new chrome mounting screws
Matches over 22 other ‘Mirage®’ items
Fit the front of 1988 to present FLTCs and the rear of all
FLTC, FLHT, FLHTC, FLHS, Road King®, FLST, FLSTC, FLSTN,
FXRD and FXRT models 1986 to present.
27126 Mirage grills with amber lenses (sold in pairs) . . .$34.39
27127 Replacement red lenses (sold in pairs) . . . . . . . . . .$6.99
27128 Replacement amber lenses (sold in pairs) . . . . . . .$6.99
27129 Replacement clear lenses (sold in pairs) . . . . . . . . .$5.99
‘Slotted’ Turn Signal Trim Rings
Chrome-plated stamped steel and include chrome mounting hardware. Sold in pairs.
For Flat-Style Lenses
Available for the early and late model flat lenses fitted to the turn signal
assemblies on most ‘Touring’ models from 1963 to present. . . . . . . . . . . . . . . . . . . . . . .$18.49
09707 Late-style for 1986 to present models
For FX-Style Lenses
Easy to install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
09709 Late-style for models from 1986 thru 2001
Mirage® Turn Signal Grills
TM
Now even the latest models can enjoy Mirage® turn signal
grills. Our adjustable mounting reflector permits the slots to
be either vertical or horizontal. Easy-to install, and mount in
minutes on all Softail® (except FLSTC), FXR, Dyna Glide and
Sportster® models from 1986 thru 2001. Sold in pairs.
27107 Amber lens with dual filament bulb
for front turn signals . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
27108 Red lens with single filament bulb
for rear turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
27109 Amber lens with single filament bulb
for rear turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
92141 Replacement red lenses (pair) . . . . . . . . . . . . . . . . . . .$9.49
92142 Replacement amber lenses (pair) . . . . . . . . . . . . . . . .$9.49
Standard #108.
5.50
Turn Signal Brackets
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
ches t!
n
i
r
n
u
e fo quipme
r
a
s
tyle iginal E
s
d
e
n Or
rten
Sho wer tha
o
narr
Hand
Controls
Lighting
Electrical
Rear Turn Signal Mounting Bars
Available in shortened and stock lengths. Select the shortened bars to give
your bike a cleaner look by moving the turn signals closer to the bike, or
choose the stock length to maintain the factory look. Economical die-cast
versions are available chromed or polished. Steel bars are chrome-plated
and designed to be much more resistant to breakage than the die-cast part.
19246
12258
Exhaust
12256
Fits 4-speed FL Models from 1974 thru 1984, FL Softail® Models
from 1986 to Present and FLT, FLHT, FLHS and Road King®
models from 1991 to Present
Shortened
Stock Length
19249
12254
19246
n/a
Intake
Die-cast chrome (repl. OEM 68510-74B) . . . . . .$32.99
Steel chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.51
Fits all FLT, FLHT and FLHS models 1985 thru 1990 or FXRT and
FXRD models 1983 thru 1992
Shortened
Stock Length
12258
12256
Engine
ed
k
rten
o
Stoc
h
S
Steel chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.49
Gaskets
Note: Installation of shortened turn signal bars may be in violation of FMVSS Standard #108.
19249
Tranny
& Clutch
Driveline
Before
Wheels,
Tires
& Brakes
After
Frames
Doss Turn Signal Bracket Filler
Fills in the opening, hides the wiring, and gives
your turn signals a clean look. These chromeplated steel covers, designed by Rick Doss,
install in minutes. Fits rear turn signal bracket
(OEM 68510-74B) on FL Softail® models from
1990 to present, and FLT, FLHT, FLHS and Road
King® models from 1991 to present. . . . .$34.49
19257 Sold in pairs
Forks
& Shocks
Short Rear Turn Signal Brackets
Tired of kicking your turn signals ever time you swing a leg
over? These brackets look like
the stock factory items, but are
less than half the length, and
are perfect for getting those
rear turn signals in tight to the
bike where they belong.
Fits Sportster®, FX Softail® and
4-speed FX models from
1973 to present. . . . . . . . .$21.39
19353 Sold in pairs
Sheetmetal
General
5.51
Cross
Reference
Lighting
Doss Marker Light Mirror Mounts
09152 Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.49
5
19237
Turn Signal Relocation Brackets for Springer Softail® Models
19238
Chrome steel brackets provide an alternative mount for stock or custom turn signals or
marker lights. Sold in pairs with hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49
13257 Fits all Springer Softail® models from late 1988 to present (lights not included)
Chrome Turn Signal Mounting Bracket
Everything necessary for installing turn signals on the front
of 4- or 5-speed FL models from 1968 thru 1992. The universal
mounting clamp permits installation on a variety of
motorcycles.
19239 Kit – includes one of CC #’s 19237 and 19238
(repl. OEM 68518-68) . . . . . . . . . . . . . . . . . . . . . . . . . .$11.59
19237 Standoff ONLY (repl. OEM 68519-68) sold each . .$4.00
19238 Clamp ONLY (repl. OEM 68795-68) sold each . . . .$5.39
Light Mounting Bracket
Strong, chrome-plated accessory lamp mounting
bracket for bullet marker lights and/or mini lamps. Easily
mounts to license plate mounting holes. . . . . . . . . . . .$6.09
19096 Mounting bar
09149
Adjure Marker Light Mounts for Softail®
and ‘Touring’ Models
These mounts will permit you to install ‘Beacon’ marker lights
to the front or rear turn signal mounting bars on most FL
Softail® and ‘Touring’ models from 1968 to present.
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95
634052 For ‘Beacon 1’ marker lights
634053 For ‘Beacon 2’ marker lights
5.52
Relocation Clamp Kits
Perfectly suited for use in relocating Original Equipment turn signals from your handlebars or triple trees to your front forks. They come complete with all necessary hardware
and bolt-on in minutes. Sold in pairs.
09148 Clamps for 39mm forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
09149 Clamps for 41mm forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.59
19244
Apparel
Bike Kits
& Trailers
19245
Seats
& Bags
19236
19241
Foot
Controls
Turn Signal Relocation Kit
for Softail® Models
19242
19240
Relocates the rear turn signals further back to allow for
saddlebags. Fits FX Softail® and 4-speed FXWG models from
1984 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
330629 Replaces OEM 68548-87
Hand
Controls
Lighting
Chris Products Turn Signal Mounts
A wide selection of chrome turn signal mounting components to fit most models
from 1973 to present. Sold each.
19240 Clamp with screws (repl. OEMs 68487-82, 68486-82A) . . . . . . . . . . . . . . . . . . . . . . .$6.19
19241 Rear support with screw (repl. OEM 68480-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.69
19236 Rear support for Sportster® models from 1994 thru 2003
(repl. OEM 68480-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.14
19230 Threaded rod for CC #19236 support (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99
19242 Bracket between signal and bar clamp (repl. OEM 68477-73) . . . . . . . . . . . . . . . .$4.99
19244 Rear turn signal threaded stud (repl. OEM 68493-87) . . . . . . . . . . . . . . . . . . . . . . . .$4.34
19245 Same as CC #19244 but moves signals 1/2" closer to bike . . . . . . . . . . . . . . . . . . . .$9.34
Electrical
Exhaust
Intake
Lowered Turn Signal Kit
This custom lowered turn signal kit relocates the turn signals
from the fender struts to a new, lower position, which
provides more clearance for installing saddlebags and gives
a cleaner look. The chrome turn signal mounting bar is
threaded to accept stock type turn signals, and fastens easily
using the license plate bracket mounting holes. Kit includes
chrome turn signal bar, wiring, and hardware. Turn signals
sold separately. Fits FX, XL, and FXR models 1973 to present.
380220 Replaces OEM 68512-89 . . . . . . . . . . . . . . . . . . . . . . .$34.99
Engine
Gaskets
Tranny
& Clutch
Custom Turn Signal Mounts for 39mm Forks
Driveline
Chrome die-cast mounts move triple tree-mounted turn signals closer in to the centerline
of the motorcycle. They clear stock gas tanks when properly indexed. They may be fitted
to models with 39mm forks which have turn signals hanging from the mirror stems. For
1987 thru 2001 Sportster® and FXR models and 1991 thru 1995 Dyna Glide models with
39mm forks with turn signals mounted on the top triple tree. . . . . . . . . . . . . . . . . . . . . .$22.99
27990 Sold in pairs
Wheels,
Tires
& Brakes
Frames
Chrome Turn
Signal Bracket
Fits many Harley® models
from 1973 to present. . . . . . . .$14.49
330651 Replaces OEM 68555-87
Forks
& Shocks
Turn Signal Relocation Kit
for Dyna Wide Glide® Models
Chrome kit relocates the rear turn signals further out which
allow for saddlebags. Required when installing saddlebag
support kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
380202 Fits Dyna Wide Glide® models from 1993 to present
Sheetmetal
General
5.53
Cross
Reference
Lighting
Bullet-Style Marker Lights
Flush
mount
Halogen
5
LED
Flush mount
Adjure ‘Beacon 2’ Marker Lights
634052
Adjure ‘Beacon 1’ Marker Lights
Enhance the looks of your ride with these chrome bullet-style marker lights. The flush mount design
has a 5/16"-24 threaded hole in the body for custom applications, and they measure 13/8" in diameter
and are 27/8"-long. They are available with your choice of MR-11 halogen bulb or LED light sources,
that may be purchased with clear, amber or red lenses. Chrome housing choices are smooth or flamed.
The LED marker lights require the installation of a ‘load equalizer’ for proper operation. Includes 1/2"
chrome standoff, nylon flat washer and 11/4" hollow stainless steel bolt.
Note: Designed as supplemental lighting ONLY, and should not be used to replace Original Equipment running lights or turn signals.
Halogen Lights (sold in pairs)
The clear units are 50 watts, the red units are
35 watts, and the amber units are 20 watts.
Smooth
Housing
Flamed
Housing
Amber
Red
Clear
634027
634028
634029
$113.00
$113.00
$113.00
634030
634031
634032
$125.00
$125.00
$125.00
LED Lights (sold in pairs)
These units have 19 LEDs to provide light and
will run cooler than their halogen counterparts.
The 2-wire lights may be used as turn signals,
and the 3-wire lights will provide running and
turn signal/brake lights.
Amber
2-Wire
Amber
3-Wire
Red
2-Wire
634026
634023 634024
$206.00
$206.00
Flamed 634021
Housing $217.00
634022
634019 634020
$217.00
$217.00
Replacement LED PC Boards
Sold each.
634015 Amber 2-wire . . . . . . . . . . . . . . . . . . .$40.00
634016 Amber 3-wire . . . . . . . . . . . . . . . . . . .$40.00
634017 Red 2-wire . . . . . . . . . . . . . . . . . . . . . .$40.00
634018 Red 3 wire . . . . . . . . . . . . . . . . . . . . . . .$40.00
Note: Designed as supplemental lighting ONLY, and should
not be used to replace Original Equipment running lights
or turn signals.
Smooth
Housing
Flamed
Housing
Amber
Red
Clear
634036
634035
634034
$113.00
$113.00
$113.00
634039
634038
634037
$125.00
$125.00
$125.00
LED Lights (sold in pairs)
These units have 40 LEDs to provide light and
will run cooler than their halogen counterparts.
The 2-wire lights may be used as turn signals,
and the 3-wire lights will provide running and
turn signal/brake lights.
Amber
2-Wire
Amber
3-Wire
Red
2-Wire
Red
3-Wire
Smooth 634040 634041 634042 634043
Housing $206.00 $206.00 $206.00 $206.00
$206.00
Flamed 634046 634047 634044 634045
Housing $217.00 $217.00 $217.00 $217.00
$217.00
Marker Light Mount for Softail®
Permits you to install ‘Beacon 1’ marker lights
to the front or rear turn signal mounting bars on
most FL Softail® and ‘Touring’ models from 1968
to present.
634052 Sold in pairs . . . . . . . . . . . . . . . . . . . .$31.95
The Beacon 2 is a larger version of the Beacon 1,
measuring 21/4" in diameter. The flush mount
design has a 5/16"-24 threaded hole in the body
for custom applications. They come with your
choice of MR-16 halogen bulb or LED light
sources, that may be purchased with clear,
amber or red lenses, and the chrome housings
are available with smooth or flamed finishes.
Please note that the LED marker lights require
the installation of a ‘load equalizer’ for proper
operation. Includes 1/2" chrome standoff, nylon
flat washer and 11/4" hollow stainless steel bolt.
Halogen Lights (sold in pairs)
The clear units are 50 watts, the red units are
35 watts, and the amber units are 20 watts.
Red
3-Wire
Smooth 634025
Housing $206.00
Replacement Parts
330545 Clear lens (sold in pairs) . . . . . . . . . .$13.99
330546 Red lens (sold in pairs) . . . . . . . . . . .$13.99
330547 Amber lens (sold in pairs) . . . . . . . .$13.99
330732 20-watt amber bulb (sold each) . .$13.99
634069 35-watt red bulb (sold each) . . . . .$14.00
634070 50-watt clear bulb (sold each) . . . .$14.00
LED ‘Bullet’ Marker Lights
by Paul Yaffe Originals®
High-intensity LED arrays in place of the
traditional bulbs. Vibration resistant, long lasting with chrome housings. Mounts with a 5/16"
hollow hex bolt on most flat surfaces. . . . .$149.99
47664 Sold in pairs
Note: Designed as supplemental lighting ONLY, not to
5.54
634053
Marker Light Mount for Softail®
Permits you to install ‘Beacon 2’ marker lights
to the front or rear turn signal mounting bars
on most FL Softail® and ‘Touring’ models from
1968 to present.
634053 Sold in pairs . . . . . . . . . . . . . . . . . . . .$31.95
Replacement LED PC Boards (sold each)
634048 Amber 2-wire . . . . . . . . . . . . . . . . . . .$63.59
634049 Amber 3-wire . . . . . . . . . . . . . . . . . . .$63.59
634050 Red 2-wire . . . . . . . . . . . . . . . . . . . . . .$63.59
634051 Red 3-wire . . . . . . . . . . . . . . . . . . . . . .$63.59
Replacement Parts
330236 Clear lens (sold in pairs) . . . . . . . . . .$14.99
330237 Red lens (sold in pairs) . . . . . . . . . . .$14.99
634033 Amber lens (sold in pairs) . . . . . . . .$14.90
634071 20-watt amber bulb (sold each) . .$14.00
330239 35-watt red bulb (sold each) . . . . .$13.99
330238 50-watt clear bulb (sold each) . . . .$13.99
Bullet-Style Marker Lights
Apparel
Bike Kits
& Trailers
280058
28004
Seats
& Bags
19355
Custom Bullet Marker Lights
With Visor (sold each)
25293 Red (single filament bulb) . . . . . . . .$11.99
28004 Amber (single filament bulb) . . . . .$15.49
28001 Red (dual filament bulb) . . . . . . . . .$15.49
28003 Amber (dual filament bulb) . . . . . .$15.49
Custom and ‘Mini’ Bullet Lights
These 2"-diameter dual filament bullet lights are 20% smaller
than standard bullet lights for a clean custom look. Chromeplated steel with threaded stem for easy mounting. Sold each.
‘Mini’ Bullet Lights
230321 Amber with 2"-long stem . . . . . . . . . . . . . . . . . . . . . .$15.49
280055
Replacement Bulbs
12523 Dual filament (box of 10) . . . . .$1.54 ea.
27999 Single filament (box of 10) . . . .$1.09 ea.
Replacement Parts
230266 Blue lens for Mini bullet lights . . . . . . . . . . . . . . . . . . .$1.84
230267 Amber lens for custom bullet lights . . . . . . . . . . . . . .$1.84
230268 Red lens for custom bullet lights . . . . . . . . . . . . . . . . .$1.84
230269 Blue lens for custom bullet lights . . . . . . . . . . . . . . . . .$1.84
These chrome plated bullet lights
mount easily with a built-in
mounting bracket. Includes single
filament 12 volt, 8 watt bulb. Sold
in pairs. . . . . . . . . . . . . . . . . . . . . .$21.49
280055 Red
280058 Amber
27997
Intake
27998
Engine
Bullet Lights with Brackets
Tranny
& Clutch
Features extended mounting stud for easy installation.
Available with single or dual filament. 12 volt, 8 watt bulb
included. Sold each.
Dual
Lens Color
n/a
Amber
Driveline
$9.84
230253
230263
$9.84
$9.84
Electrical
Classic styling, built-in chrome mounting bracket
and single filament bulb for left or right-side
mount. Sold each.
Gaskets
27997 Bullet light with right mount . . .$13.99
27998 Bullet light with left mount . . . .$13.99
27999 Replacement bulb (box of 10) . . .$1.09 ea.
230253
Custom Bullet Lights
Single
Lighting
Exhaust
Bullet Lights
with Mounting Bracket
230262
Hand
Controls
Note: Designed as supplemental lighting ONLY, not to
Custom Bullet Lights
230341 Amber with 2"-long stem . . . . . . . . . . . . . . . . . . . . . .$15.49
230262
Without Visor (sold each)
19355 Red (single filament bulb) . . . . . . . .$10.99
28002 Amber (single filament bulb) . . . . .$10.62
28000 Red (dual filament bulb) . . . . . . . . .$13.99
28005 Amber (dual filament bulb) . . . . . .$13.99
Foot
Controls
Red
15130
Wheels,
Tires
& Brakes
Bullet Light
Replacement Lenses
65477
65478
Bullet Marker Lights by Pro-One™
Glass or plastic replacement lenses
for CC and Original Equipment
bullet lights (except winged styles).
Sold each.
27993 White glass
(not shown) . . . . . . . .$10.99
27996 Red glass
(not shown) . . . . . . . . .$6.49
15129 Red plastic
(not shown) . . . . . . . . .$2.49
15130 Amber plastic . . . . . .$2.49
Frames
Forks
& Shocks
Sheetmetal
Die cast marker lights are polished smooth then given a show
chrome finish. Single filament bulbs and amber lenses with
3/8" mounting holes. Optional colored lens kits are also
available. Sold in pairs.
65477 Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95
65478 Ball Milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95
65475 Red lens kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.95
General
5.55
Cross
Reference
Lighting
Marker Lights
Ness-Tech® ‘Alternative’
2" Speeding Bullet
Marker Lights
330735
KüryAkyn™ Small Silver Bullet Lights
Customize your ride with these small Silver Bullet lights from KüryAkyn .
Complete with wiring and hardware. Sold in pairs.
330735 Universal 3/8" stud mount. 20 watt. Red, amber
and clear lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.84
330736 Handlebar control mount. 20 watt. Red, amber
and clear lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99
330737 Fork mount. 20 watt. Clear and amber lenses . . . . . . . . . . . . . . . .$99.99
™
5
Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running
lights or turn signals.
Chrome-plated die-cast 2"-diameter
coned design. Available in smooth or
grooved versions with single or dual
filament bulbs. Include amber and
red lenses. Sold each. . . . . . . . . .$29.95
Smooth Grooved
04912
04914
Single filament
04913
04915
Dual filament
Replacement Bulbs
648313 Single filament bulb (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.95
648331 Dual filament bulb (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.95
230360
Mini Marker Lights with Clamps
Custom single filament marker lights. Available in red or amber. Measures
13/4"-wide, 11/8"-tall and 15/8"-deep. With 5/16 thread mounting studs.
Sold each as kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
230361
Red
Amber
Clamp Size
78088
78090
78091
78087
78089
n/a
1/2"
5/8"
3/4"
Mini Stretch Bullet Lights
These bullet lights are perfect for additional lighting on your raked out
scooter. The sleek bullet shape combines function and style to give it that
added custom touch. 11/4" x 3" Sold each.
230360 Slotted with amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
230361 Slotted with red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
230362 Smooth with amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
230363 Smooth with red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
Replacement Lens
230358 Amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99
230359 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99
5.56
‘Magnum’ Chrome
Bullet Marker Lights
12 volt dual-bulb lights mount to
most flat surfaces with a 5/16"
hollow bolt. Includes red and
amber lenses.
28025 Marker lights
(sold in pairs) . . . . .$70.89
28024 Replacement amber
lens (sold each) . . . . .$3.09
28017 Replacement red
lens (sold each) . . . .$3.09
Marker Lights
U.S. Patent #4,420,803
31582
Apparel
Bike Kits
& Trailers
31581
Seats
& Bags
31547
Foot
Controls
Diamond Marker Lights
One-piece, chrome-plated die-cast housings with pedestal bases and a unique diamond
shape. 12-volt, 4-watt single-filament bulbs. Measure 11/4"-high x 17/8"-wide. Sold each.
27500 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39
27501 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39
31556
Hand
Controls
Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running lights or turn signals.
Baron® Marker Lights
Chrome-plated 12-volt marker lights feature precision die-cast
one-piece housings. The Mini lights measure 13/4"-tall x
113/16"-wide and are 21/4"-deep, while the Baron® Marker
lights measure 21/8"-tall x 23/8"-wide and 21/2"-deep.
Chrome-plated, injection-molded grill kits are sold
separately and include new screws.
Replacement Parts
27510 Red lens ONLY (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49 Lighting
27511 Amber lens ONLY (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
09134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.28 ea.
Electrical
Note: Designed as supplemental lighting ONLY, not to replace Original
Equipment running lights or turn signals.
AutoGem ShotGun Lights
Baron® Mini Marker Lights
With single filament bulbs.
31580 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.74
31581 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.64
31556 Lens grill kit (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49
The chrome light housing is incorporated with the rear fender and saddle bag Exhaust
mounting support. This system is designed to replace the Original Equipment
bracket (OEMs 53422-97, 47440-92),
when using the laydown license bracket
Intake
(CC #’s 15668, 15669). Lights have real
glass lenses and stainless steel bezels.
Made in the USA to fit all Touring models from 1993 to present. . . . . . . . .$54.95
27309 Sold in pairs
With single filament bulbs.
31582 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.79
31583 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.24
31547 Lens grill kit (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$7.99
Note: Designed as supplemental lighting ONLY,
not to replace Original Equipment running lights
or turn signals.
With dual filament bulbs.
31585 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.24
31584 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.24
31547 Lens grill kit (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$7.99
Engine
Gaskets
Replacement Parts
12551 Single filament bulb (#168) pack of 10 . . . . . . . .$1.09 ea.
31590 Dual filament bulb (pack of 10) . . . . . . . . . . . . . . .$1.24 ea.
31586 Amber lens for Baron® Mini light (sold each) . . . .$3.14
31587 Red lens for Baron® Mini light (sold each) . . . . . . .$3.14
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
AutoGem Baby Bullet Lights
• Measure 11/8"-diameter x 21/4" from tip-to-tip
• Uses 1"-long x 5/16"-18 mounting stud
• 1"-diameter glass lenses are held in position
with a spring and O-ring retention system
• Comes with amber lenses, optional red and blue lenses are available
• Use 12-volt single filament wedge base bulbs
• Sold in pairs
LED Micro Marker Light with Amber Lens
Die-cast construction with polished chrome finish.
230299 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
230261 Amber replacement lens (sold each) . . . . . . . . . . . .$2.99
27317 Baby bullets with amber
lenses . . . . . . . . . . . . . . . . . . . . .$69.99
240275 Baby Bullets with
blue lenses . . . . . . . . . . . . . . . .$69.99
240273 Baby Bullets with
red lenses . . . . . . . . . . . . . . . . .$69.99
27318 Optional amber lenses . . . . .$14.99
27316 Optional blue lenses . . . . . . .$14.99
27319 Optional red lenses . . . . . . . .$14.99
Frames
Forks
& Shocks
Replacement Bulbs
09134 .33 amps (box of 10) . . . . $1.28 ea.
12551 .35 amps (box of 10) . . . . $1.09 ea.
12552 .19 amps (box of 10) . . . .$1.09 ea.
Sheetmetal
not to replace Original Equipment running lights
or turn signals.
General
5.57
Cross
Reference
Marker Lights
Lighting
Ness-Tech® LED
Mini Marker Lights
for 1" and 11/4" Bars
5
Clean design mounts directly to
handlebars. Includes super bright
amber LED bulbs and chrome-plated
radius billet housings. Requires
drilling and tapping of handlebar
tube. Sold in pairs. . . . . . . . . .$149.95
04900 Fits 1" bars
04901 Fits 11/4" bars
and should not be used to replace Original
Doss Square
Mini Marker Lights
Small marker lights are almost
invisible mounted below the
lower triple tree or other
custom installation. Includes red
and amber lenses. . . . . . . .$44.99
46380 Sold in pairs
Ness-Tech® Universal Mini Marker Lights
Chrome LED lights are used as front or rear applications. CNC machined
from 6061-T6 billet aluminum. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . .$129.95
04904 Red lens
04905 Amber lens
Note: Designed as supplemental lighting ONLY, and should not be used to replace Original
Ness-Tech® LED Mini Marker
for Front and Rear Light Bars
Sleek billet design replaces factory turn signals on all FL front and rear
factory light bars. Bright LED bulbs provide excellent visibility. Amber units
can be used on front or rear applications; red units can be used on rear
only. Dual filament provides additional lighting possibilities. Chrome-plated
units are sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95
04906 Amber marker lights
04907 Red marker lights
‘Ergo’ Mini Marker Lights
Our "Ergo" die-cast marker lights feature smooth contoured styling with
brilliant chrome and amber lenses. They have 5/16" mounting holes to fit
most front forks, and hardware is included. Sold in pairs. . . . . . . . . . . . . .$62.99
330813 Dual filament lights
Note: Marker lights intended for supplemental lighting only and not designed to replace
5.58
Doss Marker Lights
Apparel
Bike Kits
& Trailers
62053
Seats
& Bags
Foot
Controls
46401
Hand
Controls
Lighting
62072
Electrical
46404
Doss ‘Teardrop’ Marker Lights
The dual bulbs and distinctive shape of these
Rick Doss-designed marker lights make them
ideal for specialized lighting requirements.
Easy-to-install applications for all models from
1972 to present. Sold in pairs.
62053 Front lights and mirror mount kit
for the stem on all models from
1972 to present . . . . . . . . . . . . . . . . .$64.99
62068 Front lights and mounting clamps
for models with 41mm forks . . . . .$76.99
62072 Front lights with 5/16" mounting holes
for most front forks . . . . . . . . . . . . . .$65.99
Doss Custom Marker Lights
Chrome-plated die-cast construction. 23/4"-long,
1"-wide x 11/8"-deep with single or twin singlefilament bulbs. Lights with 3/8" mounting holes
include hardware to mount to fender struts.
Lights with 5/16" mounting holes fit most front
forks with the supplied hardware. Sold in pairs.
3/8" Mounting Holes with Red Lenses
09126 Single bulb light . . . . . . . . . . . . . . . .$44.69
09129 Twin bulb light . . . . . . . . . . . . . . . . . .$46.29
Exhaust
Intake
Engine
5/16" Mounting Holes with Amber Lenses
09127 Single bulb light . . . . . . . . . . . . . . . .$41.59
09130 Twin bulb light . . . . . . . . . . . . . . . . . .$43.19
Replacement Parts
09123 Red lens (sold each) . . . . . . . . . . . . . .$4.49
09128 Amber lens (sold each) . . . . . . . . . . .$4.49
09134 Single filament bulbs
(box of 10) . . . . . . . . . . . . . . . . . .$1.28 ea.
Note: Designed as supplemental lighting only, not to replace
46403
Gaskets
Doss Round Marker Lights
Modern design has dual filament bulbs and
unique smooth mounting with a recessed area
for a caliper insert. Includes red and amber lenses, mounting hardware and our standard caliper
inserts. You can upgrade these marker lights
with any 1.80" caliper insert available in the
market today. Sold in pairs.
46401 Front lights and mirror mount kit
for the stem on all models from
1972 to present . . . . . . . . . . . . . . . . .$62.99
46403 Front lights for 5/16" mounting hole for
most front forks (39mm forks require
CC #27990 signal mounts) . . . . . . . .$59.99
46404 Front lights and mounting kit for
models with 41mm fork tubes . . . .$76.99
46405 Front lights and mounting kit for
models with 39mm fork tubes . . . .$76.99
98234 Replacement bulbs
(pack of 10) . . . . . . . . . . . . . . . . . .$1.09 ea.
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
5.59
Cross
Reference
Lighting
Mirror/Fork Marker Lights
5
Mirror Mount Side Light Mini Markers
Doss Chrome Billet Side-Mount Marker Light Kits
Another stylish product from master customizer, Rick Doss, and a great way
to clean up the front end of your bike. They’re made from chrome-plated
billet aluminum and feature front and rear amber lenses and twin bulbs in
the housing to maximize visibility. A variety of kits are available to fit many
models including all FL Softail® models with Original Equipment ‘tins,’ as
well as some our most popular aluminum housing headlight kits.
46166 Fits all FL Softail® models from 1986 to present (shown) . . . . . .$59.99
62040 Fits all 4-speed FL models with aluminum headlight nacelles
from 1960 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
62310 Fits CC #’s 46534, 46336 ‘Teardrop’ headlight housing kits . . . .$110.99
62311 Fits CC #’s 26747 ‘Spearpoint’ headlight housing kits . . . . . . . . .$110.99
Rectangular mini marker lights come with side illumination
for increased visibility and a custom look. Mounts to the base
of the mirror with threaded adapter. Sold in pairs.
330755 Kit with twin bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.99
65393
65395
65396
65394
‘Millennium’ Triple Tree Light Bars by Pro-One™
Chrome-plated billet marker light bar mounts through the
headlight mounting bolt and features flush mounted elliptical
amber lenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
Smooth Ball Milled
65393 65394 For Wide Glide® front ends
65395 65396 For narrow glide front ends
09155
Doss Marker Light Kits
and Mirror Mounts
Complement your Original Equipment
turn signals with a pair of our Doss marker lights. They come with one or two 12volt single filament bulbs, and bolt-on in
09152
minutes to all models from 1972 to present. Each set includes a pair of lights and
all necessary mounting hardware. Sold in pairs.
Complete Kits with Lights
09155 Kit with twin bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49
09156 Kit with single bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99
Replacement Parts
09152 Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.49
09128 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49
09123 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49
09134 Single filament bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . .$1.28 ea
5.60
Fork & Fender Marker Lights
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Side View
Marker Lights
by Darrell Hayes
Custom Marker Lights by Darrell Hayes
Two-piece housings clamp securely to the fork tubes and include plastic
sleeves for universal attachment to 35mm, 39mm or 41mm fork tubes.
They feature amber lenses with single or twin single-filament 12-volt
bulbs (will not work with fork tins, or aluminum headlight housings).
15081 Kit with single bulb lights (sold in pairs) . . . . . . . . . . . . . . . . . . . . .$79.99
15082 Kit with twin bulb lights (sold in pairs) . . . . . . . . . . . . . . . . . . . . . .$82.99
Chrome 12 volt dual bulb marker
lights mount to 35mm, 39mm or
41mm fork tubes with integral
bracket and included spacers and
hardware. . . . . . . . . . . . . . . . .$92.49
15083 Sold in pairs
Replacement Parts
12551 Single-filament bulbs (#168) pack of 10 . . . . . . . . . . . . . . . . . .$1.09 ea.
Exhaust
Intake
Note: Designed as supplemental lighting
ONLY, not to replace Original Equipment
running lights or turn signals.
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Strut Mount Marker Light Set for Softail® Models
by Darrell Hayes Custom Concepts
design by john reed
Chrome Wedge Slanted Marker Lights
Smooth contoured marker lights are perfect for fender strut or saddlebag
mounting. Design blends well with most flat surfaces. 12-volt dual filament
kit includes amber and red lenses, hardware and gaskets. . . . . . . . . . . .$80.99
27616 Sold in pairs
This marker light set provides a new
and unique look to the rear fender
of your bike. Made of chromeplated die-cast aluminum and
includes both amber and red
lenses. Uses twin single filament
bulbs in each light which can be
wired together as turn signals,
or can function as running lights
and turn signals. They may be
mounted above or below the rear fender strut, and match our popular
Darrell Hayes’ front marker lights (CC #15083) and our Darrell Hayes
swingarm marker lights (CC #15235). Sold in pairs. . . . . . . . . . . . . . . . . . .$89.99
15062 Fits all Softail® models from 1984 to present (except Deuce™ models)
Equipment running lights or turn signals. Will not work with sissy bars and saddlebags except
in custom applications. When used in conjunction with the Original Equipment license plate
bracket on FX Softail® models, it may be necessary to modify the bracket.
5.61
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Fender/Strut Marker Lights
TM
Lighting
09061
Doss Wedge Marker Lights
Die-cast construction, flawless chrome-plating and a unique custom look.
Mount flush to flat surfaces like struts or the sides of fenders. 51/2"-long x
11/4"-wide x 1"-tall.
5
09061 Amber twin bulb lamps (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$43.49
Replacement Parts
09134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.89 ea.
Mirage® Marker Lights
Our 12-volt marker lights were designed by the styling team at Custom
Chrome® and feature die-cast construction, flawless chrome-plating and a
terrific look. Single or twin bulb versions with red or amber lenses. Mount
flush to flat surfaces like struts or the sides of fenders.
Marker Lights (sold in pairs)
Red
Amber
09110 09111 Single bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.29
09112 09113 Twin bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.39
Replacement Parts
09134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.89 ea.
Slotted Marker Lights
15101
15102
This chrome marker light kit features custom ball milled slots accented with
a black painted trim. Heavy duty die-cast construction looks like billet without the high cost. The flush mount design is ideal for custom turn signals,
marker lights or running lights on fenders, fender struts, saddlebags etc.
Kits include two 12 volt marker lights and mounting hardware. They measure
1" x 6". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99
330720 Amber lamps (sold in pairs)
‘Wedge’ Marker Lights
Chrome-plated die-cast wedge-shaped lights have single filament bulbs.
They measure approx. 31/2"-long x 11/4"-wide. Sold in pairs.
15101 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
15102 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
09102 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
09103 Amber lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
5.62
Fender/Strut Marker Lights
Apparel
Bike Kits
& Trailers
330780
Seats
& Bags
Foot
Controls
Chrome “Arrow”
Marker Lights
Ness-Tech® 45º Mini Fender Lights
Designed to mount on any flat surface such as the side of the fender
or fender rail. Measures 5/8"-thin. CNC-machined from 6061-T6
chrome-plated billet aluminum. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . .$159.95
04902 Red
04903 Amber
Arrow marker lights by CCI
feature a chrome die-cast housing and
contoured lens. Flush mount design is
ideal for fender struts, fender sides or saddlebags. Complete with amber
and red lenses and a choice of single or dual filament 12 volt bulbs. 1" x
61/4" Sold in pairs.
330780 Arrow marker lights, single filament bulbs . . . . . . . . . . . . . . . . . .$57.99
330782 Arrow marker lights, dual filament bulbs . . . . . . . . . . . . . . . . . . .$57.99
Hand
Controls
Lighting
Electrical
05565
05562
Exhaust
Intake
05564
Engine
05563
Ness-Tech® Chrome-Plated Mini Marker Lights
At only 5/8"-thick, these chrome-plated billet aluminum 12-volt marker
lights are super trick. 45 degree fender-mount or universal mount that
works well front or rear. Sold in pairs.
Amber
Red
05562 05563 45° fender mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95
05564 05565 Universal mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
Replacement Parts
05216 Light bulbs (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.95
Donnie Smith Mini Marker Light
Gaskets
Rounded profile and smooth, half-moon lenses define these versatile marker lights. They look great on everything from fender struts to hard bags.
They mount to any flat surface, and use the small, wedge-type single filament bulbs. Comes with both amber and red lenses, mounting hardware
Tranny
and rubber base gasket. 1" diameter lens, 31/4" overall length.
& Clutch
330790 Donnie Smith marker light, single filament . . . . . . . . . . . . . . . . .$34.99
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Fender Strut Lights by KüryAkyn
Add a clean, flowing look and supplemental lighting. Install on fender
struts of all Softail® models from 1984 thru 2003. Sold in pairs. . . . . . .$89.99
48211 Includes red and amber lenses
Note: Does not fit with permanently mounted saddlebags or sissy bars. Designed as supplemental lighting ONLY, not to replace Original Equipment running lights or turn signals.
Sheetmetal
Doss ‘Teardrop’ Marker Lights
The dual bulbs and distinctive shape of these Rick Doss-designed marker
lights make them ideal for specialized lighting requirements. Easy-to-install
applications for many models from 1972 to present. Universal/rear fender
strut mount with side lens and 3/8" mounting threads. . . . . . . . . . . . . . . .$74.99
62058 Sold in pairs
5.63
General
Cross
Reference
Lighting
Marker Lights
5
09040
Swingarm Marker Lights
Marker Light Axle Covers by Darrell Hayes
Redefine your bike with these chrome die cast rear axle covers. Includes
integrated marker lights for the ultimate look. Fits Softail® models from
1986 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.64
15235 Sold in sets
Increase rear visibility and style with our Bob McKay-designed swingarm
marker lights and end caps. Die-cast, chrome-plated aluminum with chrome
hardware, 12-volt bulbs, and both amber and red lenses. They replace the
Original Equipment rear axle adjusters and swingarm end caps. Sold in pairs.
09040 Fit all Dyna Glide models from 1991 to present . . . . . . . . . . . .$59.99
09041 Fit all 4-speed FL and FX models from 1973 thru 1986
and all Sportster® models from 1979 to present . . . . . . . . . . . .$80.44
LED Fender Lights by Adjure
These LED units will pop right into place in the Original Equipment holders
on the front and rear fenders of most FL Softail® and ‘Touring’ models from
1980 to present. No need for a load equalizer just plug them in and ride
off. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.90
634000 Red (rear)
634001 Amber (front)
design by john reed
Swingarm Marker Light Kit
Add style and visibility. Light replaces the Original Equipment rear axle
adjusters and swingarm end caps. Kit includes hardware, 12-volt bulbs
and both amber and red lenses.
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99
29310 Fits Dyna Glide models from 1991 to present
15098
15097
Note: Requires drilling to run wires through swingarm
19327
19328
Front Fender
Trim Lights
Indian Head
Fender Lamp
Lightweight chrome-plated ABS
lights add attractive side-mounted
running lights. Splice into existing
fender tip light wiring for an
attractive installation.
Sold in pairs. . . . . . . . . . . . . . . .$45.99
76013 Fit 4-and 5-Speed FL, FLT,
FLHT, FLHS and Road King®
models 1973 thru 2003
For a vintage look on your bike
just add our fender lamp that features a molded Indian Head face in
the white plastic lamp lens.
Perfectly fits the curvature of most
full front fenders used with 16"
front wheels.
27512 Chrome housing . . .$46.99
27514 Replacement
white lens . . . . . . . . . .$6.49
5.64
Fender Marker Light
Assemblies and Lenses
15096
15095
These marker light assemblies and lenses have been used since 1980 on the
front and rear fenders of many models. Sold each.
Rear Lenses
15098 Red lens with Blue Dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
15096 Stock replacement red lens (repl. OEM 68046-79) . . . . . . . . . . . . .$4.99
Front Lenses
15097 Amber lens with Blue Dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
15095 Stock replacement amber lens (repl. OEM 59180-80) . . . . . . . . . .$4.99
Complete Assemblies
19327 Front with amber lens (repl. OEM 59082-79) . . . . . . . . . . . . . . . . .$18.49
19328 Rear with red lens (repl. OEM 59658-79) . . . . . . . . . . . . . . . . . . . . .$18.49
Rear Fender Marker Lights & Brackets
Apparel
Bike Kits
& Trailers
Seats
& Bags
46631
Ness-Tech® ‘Legacy’ Turn Signals
Foot
Controls
Chrome billet custom rear lighting. Single filament lights
have amber lenses (optional red lenses available). Kits fit all
4-speed FL models 1974 thru 1984, FL Softail® models from
1986 to present, and all Touring models from 1991 to present
(taillights not included).
05663 For Ness-Tech® billet taillights
(CC #'s 05631, 05633) . . . . . . . . . . . . . . . . . . . . . . . . .$199.95
05215 Amber lens (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.94
05214 Red lens (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.94
05216 Single filament bulb (sold each) . . . . . . . . . . . . . . . .$1.95
Hand
Controls
Lighting
Electrical
46697
Exhaust
Intake
Engine
Gaskets
design by
john reed
Rear Turn Signal Lightbar Kit
Enhance your visibility in style. This chrome unit is shorterthan-stock for a clean look and the lights each have two
single filament bulbs that can be used as separate turn signal
and running lights or wired together as brighter turn signals.
Includes a set of amber and red lenses and fits 4-speed FL
models from 1974 thru 1984, 5-speed FL Softail® models from
1986 to present, and FLT, FLHT, FLHS and Road King® models
from 1991 to present.
29313 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$135.99
09134 Replacement bulbs (box of 10) . . . . . . . . . . . . . .$12.89 ea.
Tranny
& Clutch
Doss V-Style Rear Turn Signal Kit
Signal your intentions with this new kit from Rick Doss. The full kit comes with Magnum
bullet lights and there’s also a V-style bracket that uses some Original Equipment turn
signal assemblies. A matching spotlamp mounting bar may be found on page 5.16 of this Driveline
catalog section. Fits 4-speed FL models from 1974 thru 1984, Heritage Softail® models
from 1986 to present, and FLT, FLHT, FLHS and Road King® models from 1991 to present.
46631 Kit with Magnum bullet lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.09
Wheels,
46698 Bracket only with mounts for CC #28025 Magnum lights . . . . . . . . . . . . . . . . .$143.89
Tires
46697 Bracket only with adapters for various turn signals . . . . . . . . . . . . . . . . . . . . . . .$119.99
& Brakes
Note: Even though CC #46697 fits all of the models listed above, you must use Sportster®/Dyna Glide
turn signal assemblies as shown.
Frames
Chrome ‘39’ Style Marker Lights
Styled after the classic good looks of 1939 Ford
taillights, these marker lights add just the right
touch to your classic ride. Front lights fit all models with side bolts in the triple trees. Rear lights
are attached to a chrome bracket that is held in
place by the Original Equipment taillight, and fit
all models (except those with Fat Bob fenders
and 1998 thru 2003 XL1200S) from 1973
thru 1999.
27042 Rear marker light and bracket . .$107.89
27039 Front marker lights
(sold in pairs) . . . . . . . . . . . . . . . . . . . .$99.99
Note: Designed as supplemental lighting ONLY, not to replace
5.65
Forks
& Shocks
Sheetmetal
General
Cross
Reference
European TÜV Marker Lights
Lighting
Custom Chrome® Bullet
Marker Lights with TÜV
5
Chromed or black small marker lights,
available in grooved and smooth versions. They come with ECE mark and
amber lenses. Sold in pairs. . . . . . .$65.79
87007 Smooth, chrome
87008 Grooved, chrome
686608 Smooth, black
686609 Grooved, black
Handlebar Turn Signals and
Vibration Dampeners with TÜV
Innovative turn signals with integral vibration
dampeners to mount into the handlebar ends.
These turn signals feature a halogen lamp and
they are ECE 50.11 approved. Fits handlebars
with 12-24mm inner diameter.
Sold each.
85068 Chrome-plated steel . . . . . . . . . . . .$150.79
85069 Satin finished stainless steel . . . . .$180.49
85070 Black anodized brass . . . . . . . . . . . .$121.09
85071 Satin finished aluminum . . . . . . . .$105.59
85817 Black aluminum . . . . . . . . . . . . . . . .$121.69
686220 Polished aluminum . . . . . . . . . . . . .$104.99
686221 Polished stainless steel . . . . . . . . . .$125.19
85808 Replacement bulb . . . . . . . . . . . . . . .$17.29
JOS Aluminum Mini
Turn Signals with TÜV
One of the smallest turn signals
available with TÜV approval in
Europe (60mm in diameter). They
are sold without the stainless steel
stems which are available separately, but may be mounted to
the Original Equipment stems.
85174 Mini turn signal
(sold in pairs) . . . . .$202.49
85175 Stainless steel
mounting stem ONLY
(38mm x 15mm)
sold each . . . . . . . . .$23.39
Chrome
Bullet Lights
with TÜV
Chrome ABS Mini Turn
Signals with TÜV
Chrome-plated ABS plastic turn
signals with 30mm mounting stem,
wires and M10 thread. They are
78mm long and have a diameter
of only 50mm. Sold each. . .$10.49
86014 Front left, rear right
86015 Front right, rear left
The most popular turn
signals all over the world
are now available with
German TÜV approval.
These chrome-plated
die-cast bullet lights
feature a single filament
bulb and an amber
plastic lens. Sold each.
85868 Bullet light
assembly with
TÜV . . . . . .$53.79
85869 Replacement
amber lens
with TÜV
ONLY . . . . .$13.99
Micro Mini Turn Signals with TÜV by Kellermann®
These turn signals are designed to match with the handlebar- mounted turn signals by Kellermann®. CC offers three different versions which are prepared
to mount on plain surfaces. When mounting on slant surfaces, the additional purchase of a specially designed adaptor is required. The TÜV-approval is valid
only for use as rear turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.39
Micro Mini Turn Signals Adapters
Extensions (1")
Extensions (1,6")
Repl. Bulb (Micro Mini) Thread Extensions M8 x 40mm
86815 Chrome
86818 Chrome
86822 Chrome
86825 Chrome
86828 Single bulb
686217 Chrome
86816 Steel
86820 Steel
86824 Steel
86827 Steel
86829 Power resistor
686218 Steel
86817 Black
86819 Black
86823 Black
86826 Black
N/A
686219 Black
Handlebar Turn Signals with TÜV
RBS Custom Turn Signal Sets with TÜV
CNC-machined from billet aluminum and then chrome-plated or black anodized. These
turn signals come with approved ‘E’-mark lenses, mounting studs, H4 21W bulbs and
custom fork stop kit which is necessary for models with 5.0 gallon gas tanks.
Sold in sets of 4.
86047 Chrome-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$655.89
86039 Black-anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$655.89
84855 Replacement amber TÜV lens only (sold each) . . . . .$27.09
5.66
Chrome-plated ‘Bullseye’ turn signals to mount into the ends
of handlebars. Available for 7/8" (22mm) and 1" (25,4mm)
handlebars. Electronic flasher relay is required.
84853 For 7/8" bars (sold in pairs) . . . . . . . . . . . . . . . . . . . .$21.29
84854 For 1"bars (sold in pairs . . . . . . . . . . . . . . . . . . . . . . .$21.29
84860 Replacement bulb (pack of 10) . . . . . . . . . . . . . .$96.59
Replacement Lenses
For handlebar turn signals (CC #’s 84853 and 84854).
84855 TÜV lens with ‘E’-mark (each) . . . . . . . . . . . . . . . . .$27.09
Load Equalizers & Accessories
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Run, Brake & Turn
Signal Plug-In
by Badlands
Hand
Controls
Badlands Load Equalizer I & II
A three-in-one illuminator increases visibility
from the rear of the motorcycle! This plug-in
module turns stock or custom rear turn signal
lights into combination running and brake lights
while maintaining their turn signal function.
Compatible with the new TSM and TSSM module/security system. Features include:
• Built-in load equalizer
• Designed for late model bikes that have the
factory security system, as well as earlier style
turn signal modules
• Works with Original Equipment turn signals
• Works on single filament bulbs and halogens
• Runs multiple marker lights or turn signals
• Includes wire connectors and simple diagrams
604900 Fits Sportster® models from 1999 thru
2003, Dyna Glide and Touring models
from 1997 thru 2003,and Softail® models
from 1996 thru 2003 . . . . . . . . . . . .$118.95
Load Equalizer I
Designed to return amperage draw to the correct factory specifications when aftermarket
marker lights are used to replace stock turn signals. The self-cancelling Brain Box must have the
correct draw in order to function properly. The
load equalizer can also be used in conjunction
with a heavy duty flasher on early model bikes,
when small marker lamps are being used as turn
signals. For LEDs use the Load Equalizer III. Fits
from 1973 thru 1999.
12690 Load Equalizer I . . . . . . . . . . . . . . . . .$23.95
Load Equalizer II
The Load Equalizer II performs exactly the same
function as the Load Equalizer with the added
feature of allowing you to retain emergency
flasher capability , when the bike is shut off.
This unit has a built-in thermister, it helps cut
down on the heat while your bike is functioning
in the emergency flasher mode. For LEDs use the
Load Equalizer III. Fits from 1973 thru 1999.
36924 Load Equalizer II . . . . . . . . . . . . . . . . .$32.95
Lighting
Badlands Load Equalizer III
• Fits all models equipped with the TSSM security/alarm module or the TSM turn signal
module from 1991 to present
• Must be used on all Harley-Davidson® models
from 2000 to present!
• Works flawlessly with the new generation of
Harley-Davidson modules and is compatible
with most of the custom turn signals available, including (tiny) wedge bulbs and LEDs
• If you have a security key icon that is not
functioning correctly (stays on all the time) or
your turn signals blink erratically, this module
will solve any related problem
• This new module produces absolutely no heat
and is also intended for the 1991 thru 1999
H-D® standard turn signal modules
• Will run emergency flashers for any amount
of time and is designed for parade use
• American-made with quality components
699997 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$69.95
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Illuminator Pro Module
by Badlands
This module is a custom bike builder's dream.
All of the latest technology is built into this one
module!
• Recommended for stock models from 1973
thru 1990
• Works great on custom bikes without selfcancelling features
• 11 second time flashing that automatically
cancels
• Solid state built-in flasher
• Manually cancel at any time for quick lane
changes
• Built-in load equalizer runs LED’s up to
100 watts per side
• Front run and turn on single filament bulbs
or LED’s/rear-run, brake and turn
• Emergency flasher mode
• Comes with easy to follow instructions
and connectors
604904 Illuminator Pro . . . . . . . . . . . . . . . . .$118.95
Badlands “The Illuminator”
Run, Brake and Turn Module
• Triples your visibility in the rear
• Install a pair of red lens and your bike has 3
running lights. Hit your brake and you have 3
brake lights. Touch your turn signal button,
and you maintain your turn signal function
while the other side remains a running light,
or if you are braking, a brake light
• Built-in load equalizer
• Runs your stock OEM turn signals
• Runs custom turn signals , Halogen and LEDS
too
• Easy to follow instructions and connectors
included
• Made in the USA with quality components
• Fits all models from 1965 thru 1995 as well as
Sportster models from 1996 thru 1998, and
1996 Dyna Glide and Touring models (newer
models use “Plug-In” version, CC #604900,
for convenience)
36944 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$99.95
Badlands Automatic Turn Signal
Shut Off Module III
• Gives any Harley-Davidson® or custom built
motorcycle without the 1991 and up self canceller, the same similar convenient features
• Also will work well on custom manufactured
motorcycles without the cancelling feature
• 9 second timed flashing that automatically
cancels or can be manually cancelled at any
time (quick lane change)
• Has a built-in solid state flasher and emergency flasher mode
• Built-in load equalizer runs LEDS up to 100
watts per side
• Measures 27/8"-long x 13/8"-wide x 7/8"-deep
• Includes wire connectors and simple wiring
diagrams for stock OEM wiring, and custom
bike wiring
• American-made with quality components
12675 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$88.99
5.67
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Turn Signal Modules
Lighting
604901
75567
5
Self-Cancelling Turn Signal Module by Badlands
This unique module will give any Harley® that is not equipped with the self
canceller, similar convenient features. Can be used with custom speedometers on late-model bikes. Includes simple wiring diagrams for stock OEM
wiring, as well as custom wiring and also will work well on custom manufactured motorcycles. Features include:
• Flashing automatically cancels after 9 seconds
• Can be manually cancelled at any time
• Solid state flasher has built-in emergency flasher mode
• Runs bulbs or LEDs
• Measures 27/8"-long, 13/8"-wide, 7/8"-deep
• Includes wire connectors and simple diagrams
604901 Amp style 10 pin plug for models
from 1987 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95
604902 Deutsche 8 pin plug for models
from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95
604903 Deutsche 12 pin plug for models
from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95
Custom Chrome® Turn Signal
Load Equalizer
Very small designed load equalizer exclusively
for Custom Chrome®. . . . . . . . . . . . . . . . . . . . .$19.95
686596 Sold each
5.68
Circuit Breaker Clips
Reproductions of the stock zinc-plated parts.
Includes aluminum rivet. Used many applications
to hold the turn signal flasher unit and the
circuit breaker. . . . . . . . . . . . . . . . . . . . . . . . . . .$1.62 ea.
19295 Replaces OEM 9952 (sold on a card of 10)
75566
Self-Cancelling Turn Signal
Modules
These are Original Equipment items. Excellent
for stock replacement or custom projects.$134.99
75567 Replaces OEM 68540-96
75566 Replaces OEM 68537-83G
Back-OFF™ Brake Light Module
Help those zoned-out drivers see you better.
This compact solid-state electronic device converts an ordinary brake light into a high attention-grabbing alert signal when you are stopped
or are stopping. When you apply your brakes,
Back-OFF™ will automatically flash your brake
light three times, then hold it steady for 31/2 seconds. This signal is repeated as long as the
brakes are applied. This pattern is not random,
it was selected for its ability to keep the attention of the drivers behind you. Installs in minutes with two connections. Made in the USA.
330592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99
Miscellaneous Lighting
Apparel
Bike Kits
& Trailers
Seats
& Bags
Custom Turn Signal Lenses by Motor City Cycle
Custom Taillight Lenses
by Motor City Cycle
Add a cool touch with these custom
designed taillight lenses.
• Available in a Skull, Flame
or Maltese Cross design
• Feature clear lenses on top to
illuminate the license plate
• Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
Fit most Models with Built-In Reflector (except Deuce™ Models)
623509 Skull lens
623510 Flame lens
623511 Maltese Cross lens
Fit most Models from 1973 thru 1998
623512 Skull lens
623513 Flame lens
623514 Maltese Cross lens
•
•
•
•
•
•
Easy to install
Fits with visors on rear turn signals
Also fits front turn signals
Generates better side visibility for safety
Turn signal lenses available in red or amber
Sold in pairs
Foot
Controls
Fits most Sportster , Dyna Glide, FXR, Fat Boy , Night Train ,
Springer Softail®, FLST and FLSTS Models from 1986 thru 2001
®
Part #
623501
623503
623504
623506
623508
Turn Signals
Rear
Rear
Rear
Front
Front or Rear
®
Design
Color
Skull
Maltese
Skull
Skull
Maltese
Red . . . . . . . . . . .$49.99
Red . . . . . . . . . . .$49.99
Amber . . . . . . . .$49.99
Amber . . . . . . . .$49.99
Amber . . . . . . . .$49.99
®
Hand
Controls
Lighting
Electrical
Fit most Heritage Softail®, Road King®, Road Glide®, Tour Glide®
and Electra Glide® Models from 1986 to Present
Part #
623500
623502
623505
623507
Turn Signals
Rear
Rear
Front
Front or rear
Design
Color
Skull
Maltese
Skull
Maltese
Red . . . . . . . . . . .$49.99
Red . . . . . . . . . . .$49.99
Amber . . . . . . . .$49.99
Amber . . . . . . . .$49.99
Exhaust
Note: On Road Glide® models and bikes with horizontal front turn signals, use rear style signals
on front, except on Flames.
Intake
Engine
Gaskets
‘Sine Waves’ by Glow Job
Want your ride to be noticed and stand out in the crowd?
Dr. Neon’s ‘Sine Waves’ is just want you’ve been looking for!
These spark plug wires come in a variety of colors that create an intense neon glow on your motor. Include hi-performance black wire, chrome mounting bracket and all
installation hardware. Fit all fuel injection, and High Energy
Ignition (HEI) coil systems.
Sold in pairs.
609206 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95
609207 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95
609208 Orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95
609209 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95
609210 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95
690211 Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Purple
Frames
Forks
& Shocks
Sheetmetal
General
5.69
Cross
Reference
Blue Dot Lenses & Trim
Blue Dot Lenses and Grill Kits
Top-quality plastic lenses with plastic blue dots in
chrome mounting rings.
12961 Jewel and mounting ring only
(sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
09695
Taillight Lenses
12962 Fits all models from 1973 thru 1998
as well as 1999 Softail® models
(except FLSTS models) . . . . . . . . . . . . . . .$15.49
12965 Tombstone lens for all models
from 1947 thru 1954 . . . . . . . . . . . . . . . . . .$9.49
12966 Fits all models from 1955 thru 1972 . . . .$9.49
12959 Lucas lens to fit CC #19647 taillight . . . .$9.49
12968 Cateye lens (includes mounting gasket)
to fit CC #19762 Cateye taillight . . . . . .$10.99
19903 Lens for CC #’s 19900 and 19907
Fat Bob taillight kits (not shown) . . . . .$16.99
Lighting
12962
12959
12966
12964
Taillight Lens and Grill Kits
09695 Fits all models from 1973 thru 1998 as well
as 1999 Softail® models (except FLSTS and
models with Fat Bob fenders) . . . . . . . .$25.94
12968
5
12965
Turn Signal Lenses
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99
12963 Fit all Sportster®, FX and FXR models
from 1973 thru 1985 and 5-speed FLT
and FLHT models from 1980 thru 1985
12964 Fit all 4-speed FL or 5-speed FLT, FLHT
and FLHS models from 1963 thru 1985
12967 Fit all Sportster®, FXR, Dyna Glide and
FX Softail® models from 1986 thru 2001
(except Deuce™ models)
12969 Fit all FLT, FLHT, FLHS, Road King® and most
FL Softail® models from 1986 to present
12969
12967
12961
12963
Note: Installation of these accessories may be in violation
of FMVSS Standard #108.
09695
26681
26682
Wiring Harness Pins and Sockets
Replacements for the Original Equipment parts used in many
applications since 1971. Sold in packs of 10. . .$3.29
26681 Pins (repl. OEM 72039-71)
26682 Sockets (repl. OEM 72038-71)
09700
09699
Trim Rings and Taillight Grills
Fashioned after the chevrons found on the rear fender of many older models. Two taillight lens kits are also available which include a taillight lens, a
special taillight grill and a blue dot.
Premium™
Hazard Flasher
Stock replacement hazard light
flasher unit for all models (except
1989 thru 1990 Touring models)
from 1965 thru 1990. . . . . . . .$4.99
25205 Replaces OEM 68541-64A
Chevron Style Taillight Grills
09699 Fits all models from 1973 thru 1998 as well as 1999 Softail®
models (except FLSTS and models with Fat Bob fenders) . . . .$14.84
Blue Dot Grill Kits
09695 Fits all models from 1973 thru 1998 as well as 1999 Softail®
models (except FLSTS and models with Fat Bob fenders) . . . .$25.94
Trim Rings
09700 Fits all models from 1973 thru 1998 as well as 1999
Softail® models (except FLSTS models) . . . . . . . . . . . . . . . . . . . . . .$15.49
5.70
Lenses
Apparel
Bike Kits
& Trailers
15121
15122
Seats
& Bags
Foot
Controls
15124
15123
Hand
Controls
Lighting
Bullet Shaped
Turn Signal Lenses
Amber Turn Signal Lenses with Blue Dots
Top-quality plastic lenses with the plastic blue dots centered and securely
held in place by chrome mounting rings. Sold in pairs. . . . . . . . . . . . . .$16.99
15122 Fit all Sportster®, FX and FXR models from 1973 thru 1985
and 5-speed FLT and FLHT models from 1980 thru 1985
15121 Fit all Sportster®, FXR, Dyna Glide and FX Softail® models
from 1986 thru 2001 (except Deuce™ models)
15124 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS models
from 1963 thru 1985
15123 Fit all FLT, FLHT, FLHS, Road King® and most FL Softail® models
12961 Jewels and mounting rings only . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
For an instant custom lens look,
all you need is a screwdriver.
Built to D.O.T. specifications.
Sold in pairs. . . . . . . . . . . . . .$31.99
Amber
Electrical
14995
Red
14992
14992 14991 Fit all Sportster®, FXR, Dyna Glide and FX Softail® models
from 1986 thru 2001 (except Deuce™ models)
14994
n/a Fit all FLT, FLHT, FLHS, Road King® and most FL Softail®
models from 1986 thru 1999
14996 14995 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS models
from 1963 thru 1985
Exhaust
Intake
Engine
22221
22967
22223
Jeweled Blue Dot Lenses
by Chris Products
Top-quality plastic lenses with plastic blue dots in Gaskets
chrome mounting rings. Made in the USA.
22961 Jewel and mounting ring ONLY
(sold in pairs) . . . . . . . . . . . . . . . . . . . . .$2.99
Taillight Lens
as well as 1999 Softail® models
(except FLSTS models) . . . . . . . . . . .$10.89
Turn Signal Lenses
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89
Amber
22969
22224
22964
22963
22222
Tranny
& Clutch
Driveline
Red
22223 22969 Fit all FLT, FLHT, FLHS, Road
King® and most FL Softail®
models from 1986 to present
22221 22967 Fit all Sportster®, FXR, Dyna Glide
and FX Softail® models from 1986
thru 2001 (except Deuce™ models)
22222 22963 Fit all Sportster®, FX and FXR
models from 1973 thru 1985
and 5-speed FLT and FLHT models from 1980 thru 1985
22224 22964 Fit all 4-speed FL or 5-speed FLT,
FLHT and FLHS models
from 1963 thru 1985
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
22962
Sheetmetal
General
5.71
Cross
Reference
Radiantz LED Light Kits
Radiantz L.E.D. Kits
Get the LED out and dress-up your bike by adding these awesome Radiantz
lighting kits! The wide selection includes everything from taillights to turn
signals providing the perfect way to make your bike stand out in a crowd.
61388
Lighting
61370
5
61387
61371
61372
61373
61374
L.E.D. Strip Kits
Water-resistant, and can be cut to any size. The housings use double-sided 3M
tape, perfect for custom bikes. The red and amber kits have 1mm space between
the L.E.D.’s and the green, blue and white strips have 1/2" spacing. The lighted
portion of the strips is 12"-long. Sold each.
61373 Blue . . . . . . . . . . . . . . .$106.79
61370 Red . . . . . . . . . . . . . . .$113.69
61371 Amber . . . . . . . . . . . . .$113.69
61374 White . . . . . . . . . . . . .$106.79
61372 Green . . . . . . . . . . . . .$106.79
61397 Diode (see below) . . .$15.39
Add-On License Plate Lights
Chrome billet lights bolt onto vertically and horizontally-mounted
license plates. Available in 3" or 6"-long white L.E.D. kits.
Sold each.
61387 3"-long kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.19
61388 6"-long kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.59
61361
61380
Super-Bright ‘Tombstone’ L.E.D. Kits
Consists of a red running light and brake light.
Wiring required.
Fit ‘Tombstone’ Taillights (CC #’s 19644 and 19660)
61379 Without turn signals . . . . . . . . . . . .$133.19
61385 With turn signals . . . . . . . . . . . . . . .$146.99
Flexible L.E.D Strip Kits
The housings utilize double-sided 3M tape, perfect for custom bikes, and have 1mm spacing
between L.E.D.’s in addition to being waterresistant. These strips cannot be cut.
61367 Amber 13/4"-long strips
(sold in pairs) . . . . . . . . . . . . . . . . . . . .$37.69
61368 Red 13/4"-long strips
(sold in pairs) . . . . . . . . . . . . . . . . . . . .$37.69
61369 Red 6"-long strip (shown)
sold each . . . . . . . . . . . . . . . . . . . . . . . .$60.99
61397 Conversion diode – permits CC #’s 61369,
61370 (above) to work as a running
light and a brake light . . . . . . . . . .$15.39
Fit Doss ‘Tombstone’ Taillights (CC #’s 46400 and 46409)
Super-Bright L.E.D. Kits
for Original Equipment Taillights
Consists of a red running light and brake light,
and fits in your existing Original Equipment
or aftermarket lens and bucket. No wiring
required, just plug it in.
Super-Bright L.E.D. Kits for Extra-Wide
Custom Fat Bob Taillights
and fits in the existing lens and bucket
(CC #’s 19900, 65474). Just plug it in.
Kits with Turn Signals
and 1999 Softail® models . . . . . . . .$155.19
61383 Fits all models from 1999 to present
(except 1999 Softail® and 2000-up
Deuce™ and V-Rod® models) . . . . .$155.19
5.72
61365
Turn Signal Bulbs for Softail®, Sportster®,
FXR and Dyna Glide Models
L.E.D. bulbs fit all Deuce™ models from 2000
to present, and all models (except FLT, FLHT,
Road King®, V-Rod® and FL Softail® models)
from 2002 to present. Sold in pairs. . . . . .$106.79
Single Filament L.E.D.
Dual Filament L.E.D.
61361 Red
61362 Amber
61393 Red
61394 Amber
L.E.D. bulbs fit all models from 1986 thru 2001
(except FLT, FLHT, FLHS, Road King®, 2001 FXDX
and FXDXT models, FL Softail® and Deuce™
models). Sold in pairs . . . . . . . . . . . . . . . . . . .$106.79
61365 Red
61366 Amber
61391 Red
61392 Amber
Note: Dual filament bulbs may require re-wiring on some
models.
Turn Signal Bulbs for ‘Touring’ Models
L.E.D. bulbs fit all FLT, FLHT, FLHS, Road King®
and FL Softail® models from 1986 to present.
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$106.79
Kits without Turn Signals
and 1999 Softail® models . . . . . . .$146.99
61377 Fits all models from 1999 to present
(except 1999 Softail® and 2000-up
Deuce™ and V-Rod® models) . . . . .$146.99
61365
61362
Super-Bright ‘Cat Eye’ L.E.D. Kits
and fits in the existing lens and bucket
(CC #19762). Wiring required.
61363 Red
61364 Amber
61389 Red
61390 Amber
Dual Element Conversion Diode
This diode will permit CC #’s 61369 and 61370
to work as a running light and a brake light.
61397 Sold each (not shown) . . . . . . . .$15.39
LED Lights & Kits
Double Brite Amber LED
Box by Paul Yaffe
Originals
Apparel
Bike Kits
& Trailers
These super bright amber LEDs produce twice the amount of light found
in standard LED displays. They have
amber LEDs and clear lenses. Housings
are fully sealed and drilled at the ends
to offer bolt on installation and versatility for custom designs. Feature a
three wire harness that permits many
wiring applications and lighting configurations. Made in the USA.
47679 Amber 41/2" . . . . . . . . . .$124.99
47681 Amber 61/4" . . . . . . . . . .$154.99
47683 Amber 81/4" . . . . . . . . . .$179.99
not to replace Original Equipment running
lights, brake lights or turn signals.
23580
Glow-Job Neon Tube Light Kits
• Neon tube sets can be placed on your bike to give off a noticeable glow
on either the frame rails, spark plugs or under your gas tank
• Sets come in different shapes, colors and designs
• Spark plug sets will not produce power loss even on high-performance
ignition systems
• Feature a lifetime warranty against defects in materials or workmanship
Neon Tank and Frame Kits
Mount under your tank or on your frame rails.
Neon ‘Double Tube’ Kits (sets of two)
Neon ‘Triple Tube’ Kits (sets of three)
23580 Purple . . . . . . . . . . . . .$219.99
23581 Blue . . . . . . . . . . . . . . .$219.99
23582 Red . . . . . . . . . . . . . . . .$219.99
23583 Purple . . . . . . . . . . . . .$326.99
23584 Blue . . . . . . . . . . . . . . .$326.99
23585 Red . . . . . . . . . . . . . . . .$326.99
Seats
& Bags
Foot
Controls
Hand
Controls
‘Lazer Fusion’ Module Kits by Glow-Job™
These intensely bright ‘Lazer Fusion’ modules are 100 times brighter than
Lighting
super bright LED’s. They glow and shine so that they are a perfect companion to other neon kits. They’re designed to fit where neon tubes can’t, such
as front and rear wheels, behind the horn, small air cleaners and in very
tight places. There is no limit to how many you can put on a bike. They can
all wire to the same switch if need be and are economic to use. They have
Electrical
a diode and resistor built-in so you can’t hook them up backwards, toggle
switch and all necessary installation hardware. Sold in a pack of 4 or sold
each. The Lazer Fusion ‘Expansion Module’ includes one Lazer Fusion module ONLY (does come with toggle switch). Measures 11/16" x 11/16" x 3/8".
Comes with manufacturer's lifetime warranty.
Exhaust
Color
Sold Each
Red
Blue
Purple
Green
Amber
609190
609191
609192
609193
609194
Pack of 4
$39.95
$39.95
$39.95
$39.95
$39.95
609195
609196
609197
609198
609199
Expansion Module
$109.95
$109.95
$109.95
$109.95
$109.95
609221
609222
609223
609224
609225
$29.95
$29.95
$29.95
Intake
$29.95
$29.95
Engine
Gaskets
04941
LED Lightstrips
Perfect for building custom lights. Super-bright
assemblies are complete with 90" wire leads.
09724 12 bulbs (4"-long) . . . . . . . . . . . . . . .$35.49
04938
Cateye
Horizontal
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Cateye Angled
Frames
Custom Radial
Custom Racetrack
Custom Horizontal
LED Upgrade Kits for Ness-Tech® Taillights
These kits were designed for convenient and easy upgrading of our Ness-Tech® standard taillights.
They consist of pre-wired LED arrays that replace the conventional bulbs and sockets in the Ness-Tech® housings.
04938 LED upgrade kit for Ness-Tech® Cateye Horizontal taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
04939 LED upgrade kit for Ness-Tech® Cateye Angled slot taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
04940 LED upgrade kit for Ness-Tech® Custom Horizontal taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95
04941 LED upgrade kit for Ness-Tech® Custom Racetrack taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95
04942 LED upgrade kit for Ness-Tech® Custom Radial taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95
Note: Installation of these accessories may be in violation
of FMVSS Standard #108.
Forks
& Shocks
L.E.D. Stoplight/Taillight Bulb
by Candlepower®
From one of the most trusted names in lighting
comes this unique bulb that replaces any 1157
bulb. When the taillight is in service, the LED’s
rotate and reverse direction every two seconds.
When the brake light is activated, the LED’s
pulse more than two times per second. The bulb
is also brighter, but draws less power than a
conventional bulb and will last longer. . . .$34.99
15178 Sold each
Sheetmetal
General
Note: For off-road and show use ONLY.
5.73
Cross
Reference
Replacement Bulbs
Lighting
Replacement Bulbs
5
ILLUS.
Part #
PACK QTY.
CLASS
ANSI #
VOLTS
WATTS
AMPS
C/P
CONTACT
#1
12521
Box of 10
S-8
1154
6
–
2.63
21/3
D.C. Index
repl. OEM 68165-47
#1
12522
Box of 10
S-8
198/1157
12
–
2.25
32/3
D.C. Index
repl. OEM 68168-89
#1
12515
Card of 20
S-8
198/1157
12
–
2.25
32/3
D.C. Index
repl. OEM 68168-89
#1
15199
Box of 10
S-8
1157NA
12
–
2.25
32/3
D.C. Index
Amber
#1
15184
Box of 10
S-8
1157R
12
–
2.25
32/3
D.C. Index
Red
#1
15141
Box of 10
S-8
1157R
12
–
2.25
50/14
D.C. Index
Red Super Bulb
#1
12530
Sold each
S-8
1034/1157
12
–
2.25
50/14
D.C. Index
Super Bulb
#1
12531
Box of 10
S-8
1034/1157
12
–
2.25
50/14
D.C. Index
Super Bulb
#2
19098
Box of 10
S-8
–
12
23/8
–
–
D.C. Bay
#3
12547
Box of 10
S-8
199/1156
12
–
2.25
32
S.C. Bay
repl. OEM 68572-64B
#3
15198
Box of 10
S-8
1156NA
12
–
2.25
32
S.C. Bay
Amber
#4
12523
Box of 10
G-6
–
12
–
2.25
32/3
D.C. Index
#4
31590
Box of 10
G-6
–
12
–
–
21/6
D.C. Index
#4
330269
Box of 10
–
–
12
20/5
–
–
D.C. Index
#5
15114
Box of 10
G-6
–
12
–
2.25
32
S.C. Bay
#5
27999
Box of 10
G-6
–
12
23
–
–
S.C. Bay
#6
09134
Box of 10
T-31/4
192
12
–
.33
3
Wedge-2
#6
12551
Box of 10
T-31/4
168
12
–
.35
3
Wedge-2
#6
12552
Box of 10
T-31/4
161
12
–
.19
1
Wedge-2
#7
12520
Box of 10
G-31/2
53
12
–
.12
1
Mini Bay
#8
27823
Box of 10
–
–
12
3
–
–
S.C. Bay
#9
27824
Box of 10
–
–
12
3
–
–
Push-In
#9
75264
Sold each
–
–
12
–
–
–
Push-In
dash indicator
repl. OEM 68024-94
#10
12544
Sold each
RP-11
–
6
25/25
–
–
D.C. Prefocus
repl. OEM 67750-35
#10
12543
Sold each
RP-11
–
12
35/35
–
–
D.C. Prefocus
#11
12476
Sold each
RP-11
–
6
25
–
–
S.C. Prefocus
#11
12477
Sold each
RP-11
–
12
35
–
–
S.C. Prefocus
repl. OEM 68715-64
#12
12527
Sold each
–
H-4
12
60/55
–
–
3-Lug
repl. OEM 67697-81T
#12
15112
Sold each
–
H-4
12
60/55
–
–
3-Lug
Rainbow
#12
12529
Sold each
–
H-4
12
100/55
–
–
3-Lug
100-watt high beam
#13
26368
Sold each
–
–
12
–
–
–
Two Wire
repl. OEM 68574-86
#13
26369
Sold each
–
–
12
–
–
–
Two Wire
repl. OEM 68489-86
#13
26370
Sold each
–
–
12
–
–
–
Two Wire
repl. OEM 67864-86
#13
26371
Sold each
–
–
12
–
–
–
Two Wire
repl. OEM 67862-86
Dual filament
High-beam indicator
repl. OEM 68715-49
Red Taillight and Turn Signal Bulbs
Super Bulb
Standard Bulb
Red-coated light bulb is ideal for use with clear lenses.
12-volt dual element bulb replaces 1157R. . . . . .$37.99 ea.
15184 Box of 10
High intensity stop and taillight
bulb has nearly 100% greater illumination. Long life and vibration
resistance from triple-wound double filament. 12-volt. Replaces #’s
1034 and 1157.
12530 Sold each . . . . . . . . .$6.49
12531 Pack of 10 . . . . . . . .$59.99
This red-coated light bulb is recommended for use with
our clear lenses. The 12-volt dual element bulb is rated
at 50/14 candlepower instead of the standard 32/3
candlepower and replaces an 1157R. . . . . . . . . . .$59.99 ea.
15141 Box of 10
5.74
NOTES
Note: May be unsuitable for installations
with limited clearance with plastic lenses.
Replacement Bulbs
Apparel
Bike Kits
& Trailers
Seats
& Bags
1
Double Contact
Bayonet Candelabra Index
Foot
Controls
Double Contact
Bayonet Candelabra
2
Hand
Controls
Lighting
3
Single Contact
Bayonet Candelabra
Electrical
Double Contact
Bayonet Candelabra Index
4
Exhaust
Intake
Engine
5
Miniature Bayonet
Wedge-2
Single Contact
Bayonet Candelabra
6
7
Gaskets
Tranny
& Clutch
Driveline
8
Single Contact
Bayonet Candelabra
Push-in
10
9
Wheels,
Tires
& Brakes
Double Contact
Candelabra Prefocus
Frames
Forks
& Shocks
Sheetmetal
11
Single Contact
Candelabra Prefocus
General
12
3-Lug
13
2-Wire
5.75
Cross
Reference
Lighting
Sealed Beams & Bulbs
5
15
14
16
17
18
19
Replacement Sealed Beams
ILLUS.
Part #
PACK QTY.
CLASS
ANSI #
VOLTS
WATTS
CANDLEPOWER
#14
15089
Sold each
PAR-56
6006
6
50/40
27,000/20,000
3-Lug
CONTACT
repl. OEM 67717-48B
NOTES
#14
15090
Sold each
PAR-56
6014
12
60/50
32,000/25,000
3-Lug
repl. OEM 67717-64
#14
26420
Sold each
PAR-56
H6024
12
65/40
35,000/27,000
3-Lug
H-4/Halogen
#15
12507
Sold each
PAR-46
4020
6
30/30
25,000/15,000
3-Lug
repl. OEM 67717-59
#15
12508
Sold each
PAR-46
4467
12
50/35
23,000/10,000
3-Lug
repl. OEM 67717-65A
#15
26425
Sold each
PAR-46
H4467
12
50/35
27,000/12,500
3-Lug
H-4/repl. OEM 67698-81A
#16
26400
Sold each
PAR-36
4456
12
30/30
10,000/5,000
3-Lug
Hi-Lo Beam
#17
12482
Sold each
PAR-36
4415A
12
35
7,000
Screw
Amber
#17
12524
Sold each
PAR-36
4449
12
30
22,000
Screw
repl. OEM 68674-69
#18
12484
Sold each
PAR-36
4416A
12
30
25,000
Screw
Amber
#18
12590
Sold each
PAR-36
4416
12
30
35,000
Screw
#19
15085
Sold each
PAR-36
H7616
12
37.5
70,000
Screw
H-4/Halogen
#19
15086
Sold each
PAR-36
H7604
12
50
110,000
Screw
H-4/Halogen
Replacement Bulbs
Replacement 12-volt bulbs for taillights, turn signals, marker lights and accessory lamps.
Part#
Watts
84856 21
84860 18
84863 10
84970 5
85808 21
85815 –
85968 10
86062 1.2
5.76
Application
Taillights
Handlebar turn signals
Ness® taillights
Taillights
Kellermann turn signals
Pro-One™ marker lights
TÜV approved bullet lights
German 48/60mm gauges
Filament
single
single
single
single
single
single
single
single
Notes
spherical
spherical bulb
fuse type
spherical
Halogen
w/socket & wire
w/socket & wire
QTY.
Price
10 . . . . .$57.99
10 . . . . .$96.59
10 . . . . .$41.29
10 . . . . .$20.19
1 . . . . .$17.29
1 . . . . .$10.49
10 . . . . .$26.49
1 . . . . . .$4.99

Lighting - Custom Bikes by Mike

Transcription

Similar documents

SNU Rally at the Fallon Cantaloupe Festival September 2012

Pookoo Industrial Co., Ltd.

Sugarcult Lights Out

The author has no financial interest to disclose. How Many of your

frames - Custom Chrome Europe

Oral Interaction Posters

647 $197 $377 $797 $1447 $417 30%OFF $647

Givi V46 reflective decal installation instructions:

BRANDONI Cat./List. USA

Lighting - Rollies Speed Shop