Lighting - Rollies Speed Shop

Transcription

4
Lighting
LIGHTING
688146
4
Top Mount LED Headlights
Get Hi-tech LED lighting for your Sportster or Dyna in a show chrome
top mount housing or gloss black housing at an affordable price.
688846 Top mount LED headlight with chrome housing, chrome
reflector
688849 Top mount LED headlight with black housing, black reflector
688147
688145
Custom Chrome 4" Twin Headlight
Uniquely-styled headlight containing 2 headlamps. Features include:
• H4 12-volt 60/55 watt lamp on the left-side
• H7 12-volt 55watt lamp on the right-side
• Bottom mount
• Chrome-plated steel housing
610030 Twin headlight assembly
4.02
5.75” LED Headlights and Inserts
These new custom headlights feature hi-intensity long life LED’s and
no external ballast. Light has hi/low beam & park light functions and
provides a superior white concentrated light pattern over standard
incandescent lamps. For a clean connection we recomand using
CCI# 658052. Available in a black or chrome finish 5.75” diameter
headlight assembly. Inserts also sold separately and fit most 5.75”
headlight shells. Sold each.
688145 Black LED 5.75” Headlight
688146 Chrome LED 5.75” Headlight
688147 LED insert, chrome face 5.75”
688658 LED insert, black face 5.75”
658052 Male H4 headlight connector. Sold each.
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see Cautionary Information in back of catalog.
LIGHTING
686772
APPAREL
SEATS &
BAGS
686774
FOOT
CONTROLS
HAND
CONTROLS
4" Billet Headlight
This is a beautifully styled billet bottom mount headlight. Available
in a chrome-plated or black finish. Is EC approved and has an extra
running light for safety.
688024 Chrome headlight
688025 Black headlight
‘Wave’ Headlights
Bottom mount headlight with two H3 12V/55W bulbs. The
housings are hand polished and chromed. They are E1 approved
for high beam and fog lamp! Measure 152 mm x 70.4 mm x 60.6
mm / 6" x 2,25" x 2,5". Sold each.
686772 Blue lens headlight
686774 Clear lens headlight
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
682420
682421
GASKETS
4 1/2" Smooth Headlight
This is a beautifully styled smooth bottom mount headlight. Available
in a chrome-plated or black finish. Is EC approved and has an extra
688015 Replacement lens/reflector (bulbs sold separately)
TRANSMISSION
& CLUTCH
‘Wave’ Headlights
Bottom mount headlight with two H3 12 V/55 W bulbs. They are
E1 approved for high beam and fog lamp! Measure 152 mm x 70.4
mm x 60.6 mm. Sold each.
682420 Black housing with blue lens headlight
682421 Black housing with clear lens headlight
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
5 1/2" Bates Style Headlight
This is a classic bottom mount Bates style headlight. Available in
a chrome-plated or black finish. Is EC approved and has an extra
Chrome Billet ‘Trim Rim’ Headlamp Assembly
GENERAL
Lean, clean styling in a chrome-plated 5 3/4" headlight assembly
machined from billet aluminum with an extra-thin rim design.
Includes the mounting block and sealed beam.
07340Headlight
640088 Replacement lamp
w w w.cu sto m c h ro m e.co m
CROSS
REFERENCE
4.03
LIGHTING
677709
4
Doss Custom 7" Headlights
677710
Innovative design by Rick Doss has interesting raised rib detail on
the sides of the housing to match up with those on the Original
Equipment fork tins. Includes mounting block and hardware for a
bolt-on fit to FL Softail models from late 86-04. Also available in a
smooth version to replace the stock unit.
30120
Ribbed 7" headlight
30121
Smooth 7" headlight
5 1/2” Bronze Bottom Mount Headlight
We’ve added a classic touch to one of our bestselling headlights. The
bronze trim ring really sets it apart. Matching bronze and black grips
and pegs are also available in Section 4.
677709 Bullet headlight, bronze ring
677710 Standard headlight, bronze ring
Headlight for Big Twins
Chrome ‘Bullet’ Tribar Visored Headlights by DNA
These headlights feature a clear lens with a tribar, and are both
D.O.T. compliant. They’re made from chrome-plated spun billet
aluminum, and include a headlight mount, and an H4 55/60W
halogen headlamp.
640693 5 3/4" headlight assembly
640694 4 1/2" headlight assembly
4.04
Chrome teardrop headlight features a smooth contoured retaining
ring and a unique domed shape that enhances the front fork area.
Available with standard or high output halogen sealed beams.
Choose from a stock replacement for FXSTS models from 93-13 or
custom version with Bates style tabs for use on FXWG, FXDWG and
Softail models from 80-Up.
5 3/4" for FX Springer Softail Models from 93-13
330130 Chrome shell assembly (complete less bulb)
330133 Headlight assembly with halogen sealed beam
5 3/4" for FXDWG, FXST and FXWG Models from 80-04 and FX
Springer Softail Models from 88-13
330134 Headlight assembly with standard sealed beam
330135 Headlight assembly with halogen sealed beam
330131 Chrome shell assembly (complete less bulb)
LIGHTING
APPAREL
Custom Chrome 7"
Headlight Assemblies
Faithful stock reproductions fitted
with 12-volt quartz halogen or
standard sealed beams. Includes
a chrome mounting bracket.
Easily adapted to many universal
applications or late model triple trees
for a distinctive classic look.
26477
Complete assembly with
quartz halogen 12-volt
sealed beam
26473
Complete assembly with
standard 12-volt sealed
beam
FOOT
CONTROLS
HAND
CONTROLS
12506
7" Headlight Components
The precision of our 7" headlight reproduction allows use of
component parts for restoration.
26466
7" headlight housing
26463
7" headlight inner ring
26464
7" headlight outer ring
26491
Headlight bracket, Fits 4-speed FL models from 49-84 (repl.
OEM 67810-48)
93146
Retaining clip for rubber seal (pack of four)
Chrome Headlight
Assemblies
Chrome duplicates of the Original
Equipment 12-volt headlights.
12499
For Sportster, FX and FXR
models 75-89 (repl. OEM
67705-74)
SEATS &
BAGS
12504
LIGHTING
26399
Custom Chrome Headlight Assemblies
5 3/4" Headlights
Show-chrome custom 5 3/4" headlights are available with side
or bottom mounts. They all have high-beam indicator lights, and
include mounting hardware.
12504
12-volt bottom mount
12506
12-volt side mount
ELECTRICAL
EXHAUST
Replacement Parts
12960
Chrome outer ring only
19643
Bottom mounting hardware only
12520
High-beam bulb (#53) pack of 10
INTAKE
Custom Chrome 4 1/2" Mini Lights
Designed for extra lighting on safety bars. Rated at 30 watts with
10,000 candlepower. 12-volt with high-low beam and indicator
light. Includes swivel stud mounting bracket.
26399
Sold each
ENGINE
GASKETS
Replacement Parts
12501
Chrome rim set (repl. OEMs
67725-63, 67744-75) sold in
pairs
12502
Rubber seal only (repl. OEM
67719-63)
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
Custom
Bottom Mount
Headlight
Assemblies and
Headlight Trim
Rings
Our 5 3/4" bottommount headlight
assemblies feature
an innovative trim
ring design with
a halogen sealed
beam or a precisionground, flat lens
halogen lamp with
a replaceable 55/60
watt bulb.
Complete Assemblies with Smooth Rims
08503
With flat lens halogen lamp
CHASSIS
Springer Headlight for Early Models
Exacting 6 1/2"-diameters replicas of the stock headlamps used
from 36-54. Perfect fit of the complete unit, or use any of the
replacement parts for restoration. Chrome or black-painted
finishes with chrome bezels. 12-volt.
12537
Chrome, 12-volt
12539
Black, 12-volt
SHEETMETAL
INSTRUMENTS
& GAUGES
Replacement Parts
12541
Headlight lens
12542
Headlight trim ring with screw
12545
Headlight lamp reflector
12543
12-volt replacement bulb
12544
6-volt replacement bulb
GENERAL
Note: Will not fit Springer Softail models from late 1988 thru 2003. Use CC #09754
instead.
CROSS
REFERENCE
4.05
LIGHTING
30124
4
Halogen 6 1/2" Springer-Style Headlight
30123
12721
Custom
Scalloped
Headlights
Creative designs
have built-in visors
in the headlight
rim and decorative
scallops in the
chrome-plated stamped steel bodies. Bottom mount brackets are
included for most FXWG, FX Softail (except FXSTS), and Dyna Wide
Glide models from 80-12 as well as many custom applications.
The 6 1/2" and 5 3/4" lights include 55/60 watt H-4 halogen bulbs.
Also available in a 4 1/2" mini-headlight for use in dual headlight
applications. Sold each.
30123
5 3/4" headlight
30124
6 1/2" ‘Springer’ headlight
12721
4 1/2" mini-headlight with 12-volt hi-lo sealed beam for use in
North American countries
A modern rendition of the headlight on Springer front ends from
36-54. High-power 12-volt, 55/100 watt halogen bulb, and heavyduty mount with adjustable mounting block and hardware. Fits all
FXWG and Softail models (including Springer Softail models) from
80-04, and any custom application where a Bates 5 3/4" headlight
would be used.
09754
Headlight assembly
Replacement Parts
12541
Headlight lens
12542
Headlight trim ring with screw
12529
55/100W H-4 halogen bulb
12527
Replacement Parts
640385 Headlamp replacement for 30123
640386 Headlamp replacement for 30124
30106
660756
7” Headlight Trim Rings with Built-In Visors
These visors look like they were designed in and not added on. Styled
to follow the contours of the headlight housing. These pieces are
sure to give your bike a fresh, unique look. Offered in two versions,
Smooth or with a Raised Pointed Tip to blend in as a matching highlight on OEM type 60-84 FLH housings. Also looks great on FLHT and
FLHS models.
30106
Chrome raised pointed tip version for 60-84 FLH, CC #26536
housings and 80-13 FLHT and FLHS models
660756 Black raised pointed tip version for 60-84 FLH, CC #26536
housings and 80-13 FLHT and FLHS models
30107
Chrome smooth version for 60-84 FLH, CC #26536 housings and
80-13 FLHT and FLHS and Road King models from 94-13
660755 Black smooth version for 60-84 FLH, CC# 26536 housings and
80-13 FLHT and FLHS and Road King models from 94-13
5 1/2” Bottom Mount Headlight Blue Lens
DOT approved blue lens headlight with bottom mount stud and H4
type bulb. Sold each.
688018 Blue lens headlight 5.5”
4.06
LIGHTING
APPAREL
BEFORE
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
AFTER
INTAKE
26890
ENGINE
Doss Headlight Conversion Kits for FL Softail
Models
‘Frenched’ Headlamp Trim Rings
Customize your stock headlight with these easy to install trim rings
and covers. The extended depth adds a distinctive look. Replaces
the Original Equipment trim rings or installs over them depending
on model.
15548
Fits FXST, FXSTB, FXSTC, FXLR and Dyna Glide models from
94-Up
15549
Fits FXSTS models from 93-06, FXSTSB models from 95-97,
XL1200C and 883C Sportster models from 96-13, FLSTS models
from 97-07, FXR models from 99-00 and Softail Deuce models
from 00-07
15550
Fits Sportster models (except XL1200C and 883C) from 63-Up
15551
15552
Fits FLSTC, FLSTF and FLSTN models from 94-Up
Fits FLHT, FLHS and Road King models from 83-Up and FLST
models with aluminum accessory headlight nacelle from 86-04
‘Frenched’ Passing Lamp Trim Rings
Made with the same “frenched” look as the headlamp trim ring
covers. Replaces the Original Equipment trim rings and includes
chrome hardware. Sold in pairs.
15547
Fits all models from 62-Up
• These are the original kits – still the best and most popular
with builders. Other kits on the market are but poor imitations
of Custom Chrome’s attention to detail, excellent fit and
craftsmanship
• Each piece is hand-polished and chrome-plated
Includes the two-piece aluminum head lamp housing, all mounting
brackets, headlight bucket, hardware, chrome slider covers, covers
for the lower triple tree and handlebar risers. Bolts directly to the
existing Original Equipment triple trees.
Kit For FL Softail Models
For all FL Softail models from 86-Up (except FLSTS models).
Optional Spotlamp Mounting Bar kit replaces the OEM spotlamp
bar on Heritage Softail Classic models to mount existing spotlamps
and turn signals to the headlight conversion kit.
26890
Headlight housing conversion kit, lamp not included
26899
Optional spotlamp mounting bar kit (includes mounting
bar, spacers, spotlamp/turn signal clamps and chrome
hardware)
Replacement Parts
26892
Mounting brackets (sold each)
26893
FL headlight mount (black)
26894
FL headlight bucket (black)
26895
Chrome riser cover
26896
Chrome lower triple tree under cover
26897
Chrome right slider cover
26898
Chrome left slider cover
26526
Sealed beam retaining ring
26535
Chrome outer trim ring and seal
26536
Chrome FL head lamp housing
12555
Spotlight mounting bar ONLY
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
Note: Early style windshields and brackets should be used with aluminum headlight kits.
CROSS
REFERENCE
4.07
LIGHTING
26476
26491
7" Headlight Mounting Brackets
4
Headlamp Housing Kit for FL Models
This kit features chrome-plated components that are accurate
reproductions of the polished Original Equipment parts fitted to most
4-speed FL models from 60-84. It is also a natural for customizing any
bike fitted with an early FL-style front end. Top-quality components
make the kit a snap to install, with all needed hardware and a 7-inch
halogen sealed beam that’s included.
26531
Fits 4-speed FL models with Original Equipment or Custom
Chrome triple trees 60-84 (handlebar clamp cover is for nondamper models)
Replacement Parts
26536
Set of left and right chrome-plated housings (repl. OEMs
67847-60, 67848-60)
26535
Chrome outer trim ring with rubber seal and four retaining
clips (repl. OEMs 67712-60A, 67716-60A and 67779-60)
26526
Retaining ring for sealed beam (repl. OEM 67765-60)
26893
Inner headlight mount with two adjusting screws for FL models
from 60-69 (repl. OEM 67702-65)
26894
Outer headlight bucket for FL models from 60-84 (repl. OEM
67766-60)
25234
Set of left and right chrome slider covers (repl. OEM 4596449T)
26537
Chrome handlebar clamp cover for use with steering damper
(repl. OEM 58589-60)
160095 Adjusting screw (repl. OEM 67767-60) sold each
26538
Chrome handlebar clamp cover for use without steering
damper (repl. OEM 58590-60)
160097 Wiring plug fits all 3 prong headlights, spotlights and custom
driving lights
330071 Top Spring, fits all FL, FLT models 60-13 with 7" headlight
(repl. OEM 67778-60)
330072 Bottom Spring, fits all FL, FLT models 60-13 with 7" headlight
(repl. OEM 67780-60)
Chrome brackets for mounting 7” headlight assemblies to Wide Glide
front ends.
26476
Fits FX Softail, Dyna Wide Glide and 4-speed FXWG models
from 80-03
26491
Headlight bracket, Fits 4-speed FL models from 49-84 (repl.
OEM 67810-48)
Note: CC #26476 requires removal of lower tree cover, and drilling and tapping lower tree
on models from late 1985 thru 2003.
651302
632220
632221
Headlight Brackets for Springers
Single headlight brackets to mount either a 5 1/2” or 7” headlight to
springer front ends. Made in USA by Paughco.
632220 Springer single headlight bracket for 5 1/2" headlight
632221 Springer single headlight bracket for 7" headlight
651302 Springer headlight bracket lower shock mount
12519
651303
12536
Chrome Headlight Lowering Bracket
Lowers the headlight 2 1/2" on late 88-92 Springer Softail models.
18026
Sold each
4.08
Chrome Bottom Mount Headlight Brackets
Custom brackets for a sharp clean installation.
12519
For Sportster, FX and FXR models 71-87 (except FXLR and FXRS
Sport Edition models)
12536
Custom bottom-mount bracket fits all 4-speed FL models 49-84
with 5 3/4" headlight assemblies
651303 Headlight bracket 49-77 Wide Glides
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
688165
Bottom Mount Headlight Bracket
HAND
CONTROLS
Chrome plated bottom mount brackets for mounting single headlights to 57-86, 33 mm & 35 mm forks.
632340 Bottom mount headlight bracket
LIGHTING
ELECTRICAL
EXHAUST
688166
INTAKE
Chrome 4" Halogen Light with Running Lamp
Trick, small-diameter light can be used as a headlight or as an
auxiliary light. Great for custom bike builds, especially for dual light
conversions. Features a replaceable H4 60/55 watt halogen bulb and
low wattage daylight running lamp. Includes chrome hardware for
bottom mount applications.
27912
Sold each
ENGINE
GASKETS
688167
TRANSMISSION
& CLUTCH
4.5” Chrome Spotlamps
4 1/2" Mini Light
Our chrome 4 1/2" mini light assembly features a 12 volt dual
element sealed beam (high/low) with 10,000 candlepower, adjustable
mounting block, extra long wiring harness and a built-in high beam
indicator. Sold each.
330090 Mini light assembly
330091 Shell ONLY (bulb not included)
• Swivel style bottom mount
• Different lens styles available
• 55 W H3 type bulb
• 688167 approved as fog lamp
• Sold each
688165 Spotlamp hi-beam clear lens
688166 Spotlamp hi-beam blue lens
688167 Spotlamp fog lamp fluted lens
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
Chrome 4 1/2" Mini Driving Light
Our chrome 4 1/2" mini light features a E-approved 12 volt 55 watt
bulb, adjustable mounting block and built-in blue indicator light.
Sold each.
330092 Mini light assembly
Custom 3 1/2" Mini Driving Light
GENERAL
These 3 1/2" mini driving lights are chromed steel and come with 12
Volt, 60/55W halogen bulb.
330198 Mini light with visor
330199 Replacement lens with reflector
4.09
CROSS
REFERENCE
LIGHTING
Halogen Headlamps and Bulbs
4
Dual-filament halogen H-4 bulb with a precision-ground lens. 12-volt.
12525
7" (repl. OEM 67755-81T)
12526
5 3/4"
12527
12529
604951
604950
Halogen Spotlamp Sealed Beams
These replacement 4 1/2 inch clear non-fluted sealed beams are SAE
and EC approved and come with a stepped ABS or smooth steel
reflector. Sold in pairs.
604950 Stepped reflector
604951 Smooth reflector
12555
15467
12469
Chrome Spotlamp Mounting Bars
Accurate reproductions of the stock bars.
12555
Fits all 4-speed FL models from 68-84 (repl. OEM 68780-68)
12469
Fits all FL Softail models from 86-99 (repl. OEM 58082-87)
32356
Chrome 17/32" hole plugs for spotlamp bar (pack of 10)
632218
Spotlamp Kits by National Cycle
Add extra lighting capacity to your bike by installing these kits
directly to either the fork tubes, or the lower triple tree. Includes
spotlamps, turn signals and all required hardware and clamps.
15330
Fits all FX Softail, Dyna Wide Glide and 4-speed FXWG models
with 41 mm forks from 80-85 FXDWG, 84-90, 99-13 FXST,
00-07 FXSTD, 99-09 FXSTB, 87-99, 07-10
15467
Fits all FXR, Sportster up to 03 and Dyna Glide models (except
Dyna Wide Glide models) from 88-13 Sportster (except 11-13
XLC & XL883L), 93-05 FXD, 82-94 FXR/FXRS, 87-94 FXLR
632219
Dual Headlight Mounting Bracket
Dual headlight mount brackets in a low mount version for wide glide
style triple trees, or a high mount version for use with springers. A
great retro look when used with mini round or square type headlights. Made in USA by Paughco.
632218 Low mount dual headlight bracket for wide glides
632219 High mount dual headlight bracket for springers
4.10
Chrome Lamp Insert
Classic "Tri-Bar" lamp insert adds a custom look to spotlights. Chrome
steel construction. Bolt on installation. Sold each.
330240 Fits 4 1/2" spotlamps
LIGHTING
APPAREL
12485
12483
SEATS &
BAGS
12557
12480
FOOT
CONTROLS
HAND
CONTROLS
12489
LIGHTING
Late Model Spotlamps and Sealed Beams
Choose from a variety of chrome-plated reproductions of the latemodel spotlamps with your choice of four different 12-volt sealed
beams. Replacement sealed beams for Original Equipment and
aftermarket spotlamps are also available. Mounting clamps available
separately. Sold each.
Spotlamp Assemblies
12483
With amber fluted sealed beam
12480
With clear fluted sealed beam (repl. OEM 68667-78)
12485
With amber non-fluted sealed beam
12591
With clear non-fluted sealed beam (not shown)
Replacement Parts
19238
Spotlamp housing mounting clamp ONLY (repl. OEM 68795-68)
sold each
ELECTRICAL
12556
EXHAUST
Chrome Spotlamp and Mounting Bar Kits
We’ve taken our complete spotlamp assemblies and combined
them with our chrome mounting bars to produce these complete
kits. They’re available with or without dual filament turn signals
and your choice of four different styles of sealed beams. Each kit
includes all required wiring and connectors and a toggle switch.
Kits with Turn Signals for 4-Speed FL Models 68-84
12556
With amber fluted sealed beams
12557
With clear fluted sealed beams
12592
With clear non-fluted sealed beams
INTAKE
ENGINE
GASKETS
Kits without Turn Signals for Heritage Softail and Fat Boy
Models from 86-04
12489
With clear fluted sealed beams
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
Chrome Early Style Spotlamp Assemblies
Chrome reproductions of the early 38-61 style spotlamp assemblies.
Available with 6 or 12-volt bulb and original style clamp bracket for
38-61 models and custom applications. These units duplicate the
original design with separate bulb, lens and reflector components and
are ideal for restorations. Replacement parts are also available and can
be interchanged with original equipment spotlights. Sold each.
12471
Complete assembly with 12-Volt bulb (repl. OEM 68649-64)
SHEETMETAL
Replacement Parts
12476
6V bulb (repl. OEM 68715-49)
12477
12V bulb (repl. OEM 68715-64)
19239
Turn signal mounting kit – includes one of CC #’s 19237 and
19238 (repl. OEM 68518-68)
330102 Clear glass lens ONLY (repl. OEM 68660-38)
330105 Lamp reflector ONLY (repl. OEM 68676-38)
GENERAL
INSTRUMENTS
& GAUGES
CROSS
REFERENCE
4.11
LIGHTING
658052
Chrome Headlight Visor
658051
4
Die-cast aluminum, chrome plated ‘eyebrows’ headlight visor. Fits
Sportster models 71-Up, FX models 71-84, FXR models 82-94 & Dyna
Glide models 91-05.
12621
Without light holes (repl. OEMs 67809-70, 67805-86, 67805-92)
Headlight Connectors
Our 658051 is the female version for a complete replacement of the
OE socket, terminals and wires. High temperature thermoplastic withstands temperatures in the confined space of the headlight housing
for long term use and reliability. Our 658052 is the male version only
for off-road applications that can be used when converting to an LED
headlight without the need to alter your factory wiring.
658051 Female H4 headlight connector. Sold each.
658052 Male H4 headlight connector. Sold each.
‘Eyebrow’ Covers
Chrome-plated, stamped steel covers for headlight brackets (eyebrows). Available with or without cutaway for warning lamps. Fits
Sportster models 71-Up, FX models 71-84, FXR models 82-94 & Dyna
Glide models 91-05.
19641
Without cutaway
19642
With cutaway
High Intensity H4 Bulbs
An easy way to improve your night time visibility with a simple plugin upgrade. Sold each.
German Rally Bulbs
Standard replacement bulbs available with up to 130 watt high beam
output for unbelievable night time visibility.
15135
55/60 watt
15136
80/100 watt
15137
90/100 watt
15138
100/130 watt
Hi-Low Beam Relay
Special 12-volt relay allows control of the hi-low beam from one wire
using a momentary (horn type) button.
17729
Sold each
Clear Replacement Bulbs
12527
12529
15073
Xenon Boosted Bulbs
Xenon boosted bulbs provide a cleaner, whiter light.
15139
55/60 watt
15125
55/100 watt
Gold Multi-Layer Dichroic Bulb
Gold multi-layer dichroic coating provides a full spectrum color beam.
15140
55/60 watt
‘Rainbow’ Coated Bulb
Increases visibility in all weather conditions due to its full-spectrum
glass tint.
15112
55/60 watt
4.12
H3 Halogen Bulbs
Improve the look and the light of your auxiliary lighting with these 55
watt H3 bulbs.
15073
Gold tint 55 watt H3 halogen bulb (box of 10)
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
688526
688525
688527
LIGHTING
LED Taillights
Upgrade the visibility and looks of your bike with these LED taillights. Available with chrome or blacked out housing and red or smoked
lenses. Fits most models with traditional style Harley OEM taillight from 99-Up.
688525 LED taillight smoked lens chrome housing
688526 LED taillight red lens chrome housing
688527 LED taillight smoked lens black housing
ELECTRICAL
EXHAUST
INTAKE
27376
ENGINE
09710
GASKETS
TRANSMISSION
& CLUTCH
627388
DRIVELINE
‘Laydown’ Taillight Lenses
Maintain your fender’s flowing lines by simply bolting on one of these lenses. They
look great when combined with one of our popular Laydown License Frames, and
fit most models from 73-Up. Installation of the clear lens requires the use of one of
our ‘Super Hi-Intensity’ red taillight bulbs.
WHEELS
TIRES &
BRAKES
For all Models from 73-98 and 99 Softail Models
09710
Red lens ONLY (replaces OEMs 68034-77, 68033-90)
09818
Red ‘Blackout’ lens ONLY
627392 Red lens ONLY with bottom tag window
627388 Clear lens ONLY with top tag window
627391 Clear lens ONLY with bottom tag window
15141
Red taillight bulbs (box of 10)
CHASSIS
Will not fit Deuce or FLSTS models. Mates to the 4-pin AMP
connector.
627383 Red lens with reflector (replaces OEM 68369-03)
627384 Red ‘Blackout’ lens with reflector
627389 Clear lens with reflector with top tag window
627390 Clear lens with reflector with bottom tag window
SHEETMETAL
Note: Installation of these accessories may be in violation of FMVSS Standard #108.
INSTRUMENTS
& GAUGES
For most Models from 99-E03
Will not fit Deuce or FLSTS models. Uses the Original Equipment bulb
socket assembly.
27376
Red lens with reflector (replaces OEM 68140-99)
627385 Red lens with reflector with bottom tag window
627386 Clear lens with reflector with bottom tag window
627387 Clear lens with reflector with top tag window
GENERAL
For most Models from Late 03-Up
CROSS
REFERENCE
4.13
LIGHTING
627380
627382
627381
‘Laydown’ Taillight Lenses with LED Lights
4
Do wonders for your bike by adding one of these stylish taillight lenses. These lenses plug into the Original Equipment 4-pin AMP connector on
the fender (replace OEM 68140-99 and 68369-03 taillight lenses).
• Combine with a Laydown license frame for a great look
• Most lenses feature ‘blacked-out’ outside walls for a dimensional look
• Equipped with LED lights and “pig-tail” plug-in or 4-pin AMP connectors for an easy installation
• Fit most models 99-Up (and Sportsters 99-Up)
627380 Red laydown lens
627381 Red ‘Blackout’ laydown lens
627382 Clear ‘Blackout’ laydown lens
Late Taillight
Original-style taillight for all models from 73-98 as well as 99 Softail
models (except FLSTS and models with Fat Bob fenders).
26100
Taillight (repl. OEM 68008-73A)
26110
Replacement lens
19483
Fender mounting gasket (pack of 10)
19770
Chrome license bracket, replaces OEM 59983-75 (late 3-hole)
Replacement Parts for Late Taillights
26039
Lens screws (repl. OEM 68026-73) pack of 10
26040
Lens gaskets (repl. OEM 68025-73) pack of 10
Note: Installation of these accessories may be in violation of FMVSS Standard #108. 1998
and later models with Original Equipment ’Circuit Board Taillight’ rear fenders require CC
#46642 taillight adaptor bracket.
Doss Taillight Adapter Bracket for Twin Cam
Models
Tired of being stuck with the stock taillight on your 98-11 model,
because of the way the Original Equipment rear fender is made?
Well, here’s the fix. The Doss taillight adapter permits the use of
virtually any custom taillight, such as the Aurora or Doss wide
Tombstone, on 98-11 models equipped with ‘circuit board’ taillights.
46642
Taillight adaptor bracket
Replacement LED Taillight Assembly
Chrome die-cast taillight assembly comes complete with a hightech LED array and all required hardware to replace the Original
Equipment unit fitted to many models since 73 and in custom
applications.
46848
Fits all models 73-98 as well as 99 Softail models
Note: Installation of this accessory may be in violation of FMVSS Standard #108.
4.14
LIGHTING
APPAREL
19900
SEATS &
BAGS
FOOT
CONTROLS
688060
19773
HAND
CONTROLS
19907
LIGHTING
ELECTRICAL
Custom Taillight and Bracket Kits for Fat Bob
Fenders
Fills the entire area on most Fat Bob rear fenders, (except Dyna Wide
Glide models) and is available with a chrome Original Equipmentstyle bracket or a chrome-plated custom bracket. Fit FX Softail and
4-speed FXWG models with Fat Bob rear fenders from 80-99, and CC
#’s 26433, 13206 and 13204 Fat Bob rear fenders.
19900
Kit with Original Equipment-style bracket
19907
Kit with custom bracket
Replacement Parts
19904
Taillight assembly ONLY
19902
Original Equipment-style bracket
19905
Custom bracket
19901
Red lens
Original Style Taillight
Chrome reproduction of the Original Equipment part used on most
models from 55-72.
12511
Taillight (repl. OEM 68010-64B)
12952
Red plastic replacement lens
12510
White plastic replacement license plate lamp lens
19481
Lens gasket (pack of 10)
19482
Fender gasket (pack of 10)
19773
Chrome license bracket, replaces OEM 59995-55 (early
2-hole)
19770
688060 Black license bracket, replaces OEM 59983-75 (later 3-hole)
EXHAUST
INTAKE
ENGINE
GASKETS
Note: Installation of this accessory may be in violation of FMVSS Standard #108.
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
‘39’ Style Taillight with L.E.D.
Take a trip down memory lane by adding a classic touch of 1939.
This taillight is equipped with LED’s and chrome aluminum die-cast
housing. Includes gasket. Great match with the ‘39’ style marker
lights CCI# 27042. Fits most Harley models from 73-98 with OEM style
fender with taillight mount (except Fatbob fenders) and models 99-11
when using CCI# 46642 taillight adapter bracket. Sold each.
27040
‘39’ Style taillight assembly
27042
‘39’ Style marker lights assembly
46642
Taillight adapter bracket for 99-11 models, sold each
Shown for reference only
Chrome ‘39’ Style Marker Lights
Styled after the classic good looks of 1939 Ford taillights, these
marker lights add just the right touch to your classic ride. Rear
lights are attached to a chrome bracket that is held in place by the
Original Equipment taillight, and fit all models (except those with
Fat Bob fenders and 98-03 XL1200S) from 73-99.
27042
Rear marker light and bracket
Note: Designed as supplemental lighting ONLY, not to replace Original Equipment
running lights or turn signals.
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.15
LIGHTING
Mini Cateye Taillight
Unique variation of the classic Cateye design. The design will set your
bike apart at any stoplight. Made of heavy-duty, chromed ABS plastic.
Mounting holes are spaced at 2" center-to-center using a 1/4"-20
mounting stud.
19377
Mini taillight ONLY
4
Replacement Parts
19366
Red lens
Cateye Taillights
The most popular taillight on the market! Available with chromeplated die-cast or black anodized aluminum housings, 12 volt bulb,
and built-in license plate illumination. Mounting studs are spaced 2"
center-to-center for a variety of applications. E-Mark. Sold each.
19762
Chrome die-cast taillight
600694 Black die-cast taillight
12522
Dual filament bulb (box of 10) repl. OEM 68168-89
19763
Replacement red lens for CC #19762
19764
Replacement white license plate lens
Chrome Skull Taillight
Cover
Dress-up your ‘Tombstone’
taillight with one of these
beautiful chrome-plated
die-cast covers. give your
Tombstone the ‘Skull’
treatment (taillight not
included).
98649 Skull cover
Note: Cover will not fit stock
‘Tombstone’ taillight on FLSTS
models. Installation of these accessories may be in violation of FMVSS
Standard #108.
Cateye Taillight by Custom Chrome
Has chrome plastic housing. Features a license plate clear window to
light up your license plate.
600673 Cateye taillight, chrome
600693 Cateye taillight black housing
4.16
LIGHTING
APPAREL
SEATS &
BAGS
688037
FOOT
CONTROLS
HAND
CONTROLS
688033
688035
Beehive Taillight
Reproduction of the taillight used on
many models from 39-46. Universal fender
mounting for most applications. Includes
chrome license mount, black rubber
mounting gasket and 12-volt bulb.
26357
Complete taillight (plastic lens)
replaces OEM 68002-47
26358
Plastic red lens
26360
License bracket
Note: Limited lens surface area does not meet modern
DOT standards. CC does not recommend these taillights on
vehicles newer than 1954.
Mini LED Tombstone Taillight
LIGHTING
Replacement parts
688035 clear repl. lens
688036 red repl. lens
688037 replacement license lens
ELECTRICAL
Chrome mini version of the classic Tombstone taillight. Choose between clear or red lens.
688033 Mini tombstone clear lens
688034 mini tombstone red lens
EXHAUST
INTAKE
Tombstone Taillight
Superbly crafted chrome die-cast replica of the taillight used from 47-54.
Includes a chrome license mount, black rubber mounting gasket
and 12-volt bulb.
19644
Complete taillight assembly with conventional bulb
and plastic lens (replaces OEM 68003-47)
688061 Complete black taillight assembly with conventional
bulb and plastic lens (replaces OEM 68003-47)
19645
Plastic red lens with gasket
19670
Plastic clear lens
19671
Chrome red lens bezel
19654
Fender mounting gasket (sold each)
19646
License bracket
19668
Red lens gasket (pack of 10)
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
Note: Limited lens surface area does not meet modern DOT standards. CC does not recommend
these taillights on vehicles newer than 54.
DRIVELINE
WHEELS
TIRES &
BRAKES
New Era Tombstone Taillight
CHASSIS
This is a new twist on a timeless classic! A
die-cast version of the taillight used from
47-54 with a new style lens that provides
more lens surface area and looks good
doing it. Available in either a 12-volt bulb
and LED version.
610451 Complete taillight assembly with
conventional bulb and plastic lens
610452
SHEETMETAL
INSTRUMENTS
& GAUGES
Complete taillight assembly with
LED bulb and plastic lens
Doss LED Triple Light Kit
Consists of a Doss ‘Wide Tombstone’ taillight and a set of our popular LED bullet marker
lights. Completely assembled with the chrome stand-offs already installed.
62390
Fits all models from 73-99 Softail models (except FLSTS and models with Fat Bob
fenders)
GENERAL
Note: Installation of this accessory may be in violation of FMVSS Standard #108. The marker lights are designed as supplemental lighting ONLY, and should not be used to replace Original Equipment running lights or turn signals.
CROSS
REFERENCE
4.17
LIGHTING
340306
668600
4
668607
19899
‘Sparto’ Taillights
668604
These early 1950’s “chopper” style taillights feature die-cast
construction and are available with a 12-volt bulb or a high-output
LED. The taillight is also available with powder coated black, chrome
or polished finishes. Not DOT approved.
340306 Powder coated black
19899Chrome
340308Polished
46847
LED Taillight chrome
668610
Retro Drilled Taillight
Beautifully shaped LED taillight with or without license mount/
bracket, available in a variety of finishes. Taillight measures 2 3/4”
wide X 1 1/4” deep. License plate illumination is standard, choose
between red or clear lens. Sold each.
Chrome Taillight
668600 Chrome drilled light w/bracket CLEAR lens
668601 Chrome drilled light w/bracket RED lens
668602 Chrome drilled light only CLEAR lens
668603 Chrome drilled light only RED lens
Aluminum Taillight
668604 Aluminum drilled light w/bracket CLEAR lens
632507 Aluminum drilled light w/bracket RED lens
668605 Aluminum drilled light only CLEAR lens
668606 Aluminum drilled light only RED lens
Black Taillight
668607 Black drilled light w/bracket CLEAR lens
683072 Black drilled light w/bracket RED lens
668608 Black drilled light only CLEAR lens
668609 Black drilled light only RED lens
Brass Taillight
668610 Brass drilled light w/bracket CLEAR lens
632590 Brass drilled light w/bracket RED lens
668611 Brass drilled light only CLEAR lens
668612 Brass drilled light only RED lens
4.18
"Black Beauty" Vintage Taillight
This is about the smallest, trickest "old school" taillight you're ever
gonna find! Featuring a bullet light style lens, this 12 volt taillight
incorporates license plate illumination, license plate mount and
coolest of all, it's hinged so you can adjust the angle to just where
you want it! Black powder coating for a durable finish with mounting
hardware included. This is one out of sight taillight for retro scoots.
632042 Black Beauty Vintage Taillight
LIGHTING
APPAREL
SEATS &
BAGS
629315
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
629316
ELECTRICAL
EXHAUST
INTAKE
629317
ENGINE
Classic Round Taillights
GASKETS
Add the final touch to your bobber style bike with one of these classic round taillights. Come in three different designs. Mounting brackets
and dual filament bulbs included. Sold each.
629315 Classic 1 inch light
629316 Classic 1 1/2 inch light
629317 Classic 2 inch light
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
Maltese Cross Taillight
Universal Taillight Assemblies
These custom designed taillight assemblies have universal mounting
capabilities, license plate illumination and available in two styles.
#340427 is the taillight used on our “Delta 88” custom bike. 12 volt
dual filament bulb.
340346 Chrome plated die-cast body and license bracket
Note: Installation of these taillights may be in violation of FMVSS Standard #108.
Complete with 12-volt bulb. Universal mount. Dimensions 4 1/4” W
x 3 7/8”H x 1 7/8”T
19649Taillight
19650
Lens only
Complete with LED unit. Universal mount
632341 Maltese cross taillight w/LED
GENERAL
CROSS
REFERENCE
4.19
LIGHTING
640901
4
640904
640902
640903
640907
640905
640900
640906
640908
Sidemount Taillight Frames for Softail Models
Each one is machined from billet aluminum, and features a beautiful chrome finish,
hi-intensity LED’s, and includes channeled wiring. All versions mount in place of the outer
axle spacer (includes sleeve to fit 1" or 3/4" axles) for a clean installation. Fit all 5-speed
Softail models from 87-99.
640900 Cresent Curved
640901 Cresent Vertical
640902 Cresent Horizontal
640903 Diamond Curved
640904 Diamond Vertical
640905 Diamond Horizontal
640906 Cateye Curved
640907 Cateye Vertical
640908 Cateye Horizontal
640293 Replacement Cresent lens for CCI 640900 thru 640902 (sold each)
88341
Replacement LED assembly for CCI 640900 thru 640902 (sold each)
Note: Installation of these accessories may be in violation of FMVSS Standard #108
4.20
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
99052
License Frame
not included
HAND
CONTROLS
Doss Sidemount Taillight
and License Plate Bracket
Complete with a Rick Doss designed
taillight and hardware, or with
provisions for a universal taillight
of your choice, this unique design
permits a more stable framemounting on either the left or
right-side where they clamp to the
swingarm pivot axis tube. They fit most Softail models from 00-05
For Softail Models from 00-05
99052
Complete kit with standard taillight
LIGHTING
ELECTRICAL
Universal Taillight/License Plate Assembly
• Made to mount on the left or right side of your custom
• Features 1 1/8" frame tube adaptor
• Bracket mount fits custom applications only
• Includes taillight
695394 Sold each
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
Side Mount Taillight
DRIVELINE
Universal side mount bracket made in the USA by National Cycle.
Each kit includes a DOT approved 12-volt taillight.
19888
Complete kit
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.21
LIGHTING
19647
4
Snake Eye Taillight Kits for Fat
Bob Fenders
Unique variation of the classic Cateye
design. The wide design will set your bike
apart at any stoplight. Made of heavyduty, chromed ABS plastic to last for years.
Mounting holes are spaced at 2" center-tocenter using a 1/4"-20 mounting stud.
Note: Installation of these accessories may be in violation
of FMVSS Standard #108
Taillights with Brackets
19381
For FX Softail and 4-speed FXWG
models from 80-99
Doss LED Crest Shaped Taillight
Designed by Rick Doss this crest shaped
taillight is made from CNC-machined chrome
billet aluminum with waterfall groove
accents and LED. The back has a compound
curvature for a universal fitment with two
screws and rubber gasket supplied.
620032 Fits most smooth rear fenders
Replacement Parts
19380
Taillight ONLY
19364
Red lens
19363
Lens gaskets (pack of 10)
’Lucas’ Taillight
Includes a chrome license mounting bracket.
86205
Taillight assembly (chrome bracket)
19647
19648
85874
Taillight ONLY
Replacement lens
Replacement lens gasket only (sold
each)
Universal Taillight
LED Snake Eye Taillight
Features 60 LED’s for maximum light
intensity inside a durable chrome ABS
housing. Mounting holes are spaced at 2"
center-to-center using a 1/4"-20 mounting
stud. Taillight measures 6 1/8"-long, 1 1/2"
x 2"-high and 2"-deep. 30" wire harness
with sheathing.
600206 Sold each
Includes 12-volt bulb and mounting screws.
12512Taillight
12513
Lens only
Note: Installation of these accessories may be in violation
of FMVSS Standard #108.
Chrome Taillight Visors
Taillight Visor
Fits all Harley models from 73-98 (except
FXWG and FXST).
340276 Sold each
4.22
Features a cut-out for license plate
illumination. Fits the late-style taillight on
all models from 73-98 as well as 99 Softail
models (except FLSTS and models with Fat
Bob fenders).
12299
Plain (replaces OEM 68006-83T)
LIGHTING
APPAREL
SEATS &
BAGS
Red Taillight and Turn Signal Bulbs
Super Bulb
High intensity stop and taillight bulb has nearly 100% greater
illumination. Long life and vibration resistance from triple-wound
double filament. 12-volt. Replaces #’s 1034 and 1157.
12530
Sold each
12531
Pack of 10
Standard Bulb
Red-coated light bulb is ideal for use with clear
lenses. 12-volt dual element bulb replaces 1157R.
15184
Box of 10
FOOT
CONTROLS
Super High-Intensity Bulb
This red-coated light bulb is recommended for use with our
clear lenses. The 12-volt dual element bulb is rated at 50/14
candlepower instead of the standard 32/3 candlepower and
replaces an 1157R.
15141
Red taillight bulbs (box of 10)��
HAND
CONTROLS
LIGHTING
ELECTRICAL
Note: May be unsuitable for installations with limited clearance with plastic lenses.
EXHAUST
More Replacement Bulbs on page 4.46 - 4.48
L.E.D. Stoplight/Taillight Bulb by Candlepower
From one of the most trusted names in lighting comes this unique
bulb that replaces any 1157 bulb. When the taillight is in service, the
LED’s rotate and reverse direction every two seconds. When the brake
light is activated, the LED’s pulse more than two times per second. The
bulb is also brighter, but draws less power than a conventional bulb
and will last longer.
15178
Sold each
INTAKE
ENGINE
Note: For off-road and show use ONLY.
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.23
LIGHTING
25750
4
Ness-Tech ‘Alternative’ 2" Speeding Bullet Marker
Lights
Chrome-plated die-cast 2"-diameter coned design. Available with
single or dual filament bulbs. Include amber red lenses. Sold each.
04912
Smooth, Single filament
04913
Smooth, Dual filament
04914
Grooved, Single filament
Replacement Bulbs
648313 Single filament bulb (sold each)
648331 Dual filament bulb (sold each)
Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running
lights or turn signals.
660758
Bullet-Style Turn Signal Kits
These bullet lights are styled like those fitted to Deuce models and
add the perfect touch of style to your bike! Chrome reflector-optic
signals include housing, lenses and supports. Kits include four lights
with mounts and required hardware, as well as a set of clear lenses
and amber bulbs.
25750
Fits FX Softail models from 00-07 Sportster models from 90-03
and all Dyna Glide models from 91-07
660758 Black fits FX Softail models from 00-07, Sportster models from
90-03 and Dyna models from 91-07
25749
Fits all FX Softail models from 88-99
660757 Black fits all FX Softail models from 88-99
Visored Bezel Mini Bullet
Lights
Chromed mini bullet lights with a
visored bezel. Available with amber
or red lenses. Sold in pairs.
688043 Amber lens visored (pr)
688044
4.24
red lens visored (pr)
LIGHTING
APPAREL
688030
688031
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
688028
LIGHTING
ELECTRICAL
688027
688026
688029
Visor Bezel Kits for Deuce Style Turn Signals
EXHAUST
Upgrade your stock turn signals with one of these visored bezel kits. Choose from amber, red, smoked or clear lens colors. Smoked and Clear
lenses include bulbs. Sold in pairs.
Bezels only
688026 Amber lens
688027 Red lens
INTAKE
Bezels with smoked lens and single filament bulb
688028 Smoked lens amber bulb
688029 Smoked lens red bulb
ENGINE
Bezels with clear lens and dual filament bulb
688030 Clear lens amber bulb
688031 Clear lens red bulb
GASKETS
TRANSMISSION
& CLUTCH
604314
604316
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
604315
SHEETMETAL
INSTRUMENTS
& GAUGES
604317
Smoked Turn Signal Lens Kits
• Kits include four lenses and amber bulbs
• Fit OEM turn signal housings as well as most aftermarket housings
• Sold as a set of 4 lenses
604314 Fits all 02-Up VRSCA/B models (replaces OEM #69315-02)
604315 Fits most Big Twin and Sportster models from 00-Up with Deuce/Bullet Harley style turnsignal (replaces OEM #69304-02)
604316 Fits all 86-99 FXST/FXR, 91-00 FXD, 86-01 XL model (replaces OEM #69306-02)
604317 Fits all 86-09 FLHR/C, FLHT/C/U and 86-03 FLTR models (replaces OEM #69306-02)
GENERAL
CROSS
REFERENCE
4.25
LIGHTING
688038
19093
688042
Dual filament 12-volt turn signal assemblies for most FL models from
63-85. Sold each.
19093
Amber (repl. OEM 68557-70A)
688039
4
Early Model FL Turn Signal Assemblies
Replacement Parts
15127
Red lens ONLY (sold each) repl. OEM 68570-63
15128
Amber lens ONLY (sold each) repl. OEM 68571-63
19098
Dual filament bulbs (box of 10)
688040
Chrome Mini Bullet Style Turn Signals
These chrome-plated mini bullet turn signals are available with clear,
smoked or amber lenses. Two LED versions in amber or red are also
available. Sold in pairs.
Standard versions
688038 Clear lens (pr)
688039 Smoked lens (pr)
688040 Amber lens (pr)
LED versions
688041 Amber lens (pr)
688042 Red lens (pr)
Clear Turn Signal Lenses
668431
These clear lenses change the look of the turn signals completely.
When used in conjunction with amber bulbs the turn signal looks
orange when lit. Sold each.
Clear lens for Original Equipment turn signal units on FL models from
63-85 and CC # 19093.
15157
Replaces OEM 68571-63
Clear lens for Original Equipment turn signal units on FLT, FLHT, FLHS
and Road King models from 86-07 and CC #’s 19114,19115.
15158
Clear lens for all FXR, Sportster and Dyna Glide models from 86-01.
15168
15198
Single element amber bulb (1156NA) box of 10
15199
Dual element amber bulb (1157NA) box of 10
19114
19115
Late ‘Touring’ Model Turn Signal Assemblies
Single and dual filament 12-volt turn signal units for most models
from 86-07.
19114
Dual filament assembly (repl. OEM 68400-86)
19115
Single filament assembly (repl. OEM 68402-86)
Replacement Parts
26124
Amber lens (repl. OEM 68440-86) sold each
26126
Red lens (sold each)
668431 Smoked lens (sold each)
12522
12547
Single filament bulb (box of 10) repl. OEM 68572-64B
15150
Lens O-rings (repl. OEM 68451-86) pack of 10
4.26
Chrome Light Visors
15175
Smartly designed and easy-to-install chrome visors for many models.
15175
Turn signal visors for the front of FLHT, FLHTC, FLHS, Road King
and FLSTC models from 86-07 (repl. OEM 67734-88T)
15176
Turn signal visors for the front of FLTC 88-96; rear on FLTC,
FLHT, FLHTC, FLHS, Road King, FLST, FLSTC, FXRD and FXRT
models 88-96 and FLHR models from 86-07(repl. OEM 6773788T)
LIGHTING
APPAREL
SEATS &
BAGS
330787
26154
FOOT
CONTROLS
26149
330777
Early Model Turn Signal Assemblies
Single filament replacement turn signal units for FX, FXR and
Sportster models from 73-85.
26154
Amber lamp unit with threads (repl. OEM 68514-73)
26122
Amber lamp unit without threads (repl. OEM 68515-77A)
26155
26149
Red lens ONLY (sold each)
12547
HAND
CONTROLS
330778
668432
Deuce Style Turn Signals by Chris Products
Direct replacement turn signal lights for the Softail Deuce model
(FXSTD). This sleek new design works with 73-07 style mounting
hardware and can be used on most motorcycles. Available for front
or rear. Sold each.
330787 Chrome front lamp with dual filament bulb and amber lens
(wires exit behind mounting hole)
330788 Chrome rear lamp with dual filament bulb and amber lens
(wires exit through mounting hole)
LIGHTING
ELECTRICAL
EXHAUST
Replacement Lenses
Sold each.
330776Amber
330777Red
330778Clear
668432Smoked
INTAKE
ENGINE
GASKETS
Complete Turn Signal Kits
Great kit for building bikes from the ground up. Includes all clamps
and support hardware to mount turn signal housings to handlebars
and fender struts. One kit features late-model (86-01) housings
and amber lenses with dual-filament bulbs for the front and rear.
The other has early-model (73-85) housings and amber lenses with
single-filament bulbs. Both include a pair of red lenses as a bonus.
26148
Kit with late lamp units and dual-filament bulbs (86-09)
26147
Kit with early lamp units and single-filament bulbs (73-85)
TRANSMISSION
& CLUTCH
668430
DRIVELINE
Late Model Turn Signal Assemblies
Flat Lens Turn Signal Kit by Chris Products
Features a completely re-designed chrome housing that uses standard
full-size turn signal bulbs instead of the miniature bulbs found in
other flat lens kits. Fit most Harley-Davidson models from 86-01.
19597
Complete kit with two single filament and two dual filament
lamp units
19527
Turn signal housing with red lens, dual filament bulb. Sold
each
Replacement Parts
15128
15127
Red lens ONLY (sold each) repl. OEM 68570-63
Replace damaged Original Equipment turn signals or quickly
change over from amber to red lenses with these top-quality
replacement parts.
Front Turn Signal Assemblies
Dual filament turn signal units for most models from 86-01. May
also be used on the rear of the motorcycle for increased visibility.
Sold each.
26144
Amber lamp unit with threads (repl. OEM 68406-86)
Rear Turn Signal Assemblies
Single filament turn signal units for most models from 86-01. All
four versions are the same with threads in the body, but some have
an additional hole to route the turn signal wire through. Sold each.
19590
Amber lamp unit with wiring hole (repl. OEM 68407-86)
19592
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
Amber lamp unit w/o wiring hole (repl. OEM 68410-87B)
Replacement Parts
12522
12547
15126
Lens O-rings (repl. OEM 68455-86) pack of 10
26131
Amber lens ONLY (repl. OEM 68457-86 sold each
26132
Red lens ONLY (sold each)
668430 Smoked lens ONLY (sold each)
WHEELS
TIRES &
BRAKES
GENERAL
CROSS
REFERENCE
4.27
LIGHTING
4
Custom LED Marker Lights
Pony Lights
Perfect for your old school ride or café racer. Sold in pairs with red
and amber lenses, include mount.
688194 Pony lights
Custom Marker Lights
Chrome-plated die-cast construction. 2 3/4"-long, 1"-wide x 1 1/8"deep with single or twin single-filament bulbs. Lights with 3/8"
mounting holes include hardware to mount to fender struts. Lights
with 5/16" mounting holes fit most front forks with the supplied
hardware. Sold in pairs.
3/8" Mounting Holes with Red Lenses
09126
Single bulb light
09129
Twin bulb light
654330 Single bulb light, black
654332 Twin bulb light, black
5/16" Mounting Holes with
Amber Lenses
09127
Single bulb light
09130
Twin bulb light
654331 Single bulb light, black
654333 Twin bulb light, black
4.28
These chrome plated die cast marker lights now comes with dual
function LED’s with either red or amber lens. They measure 2-3/4”
long x 1” wide x 1-1/8” deep. Universal fitment. Lights with 3/8”
mounting holes include hardware to mount to fender struts. Lights
with 5/16” mounting holes fit most front forks with supplied
hardware. Sold in pairs.
3/8” Mounting Holes with Red Lens for Rear Mounting.
688260 Chrome with Dual Function LED’s
688261 Black with Dual Function LED’s
5/16” Mounting Holes with Amber Lens for Front Mounting.
688262 Chrome with Dual Function LED’s
688263 Black with Dual Function LED’s
Replacement Parts
09123
09128
Amber lens (sold each)
93404
Dual bulb socket with 17” lead wire and dual filament bulb
Note: Designed as supplemental lighting only, not to replace Original Equipment running
LIGHTING
688072
APPAREL
SEATS &
BAGS
230341
230321
FOOT
CONTROLS
HAND
CONTROLS
Diamond Marker Lights
One-piece, chrome-plated die-cast housings with pedestal bases and a unique diamond shape. 12-volt, 4-watt
single-filament bulbs. Measure 1 1/4"-high x 1 7/8"-wide.
Sold each.
27500Red
27501Amber
688071 Black housing red lens
688072 Black housing amber lens
LIGHTING
688069
688070
ELECTRICAL
Note: Designed as supplemental lighting ONLY, not to replace Original
Equipment running lights or turn signals.
Custom and ‘Mini’ Bullet Lights
Replacement Parts
27510
Red lens ONLY (pack of 5)
27511
Amber lens ONLY (pack of 5)
EXHAUST
These 2"-diameter dual filament bullet lights are 20% smaller than standard
bullet lights for a clean custom look. Chrome-plated steel with threaded stem
for easy mounting. Sold each.
‘Mini’ Bullet Lights
230321 Amber with 2"-long stem, chrome
688069 Black housing amber lens with 2”-long stem
Custom Bullet Light
Features extended mounting
stud for easy installation.
Includes a single filament. 12
volt, 8 watt bulb and a red lens.
230253 Sold each
INTAKE
Custom Bullet Lights
230341 Amber with 2"-long stem, chrome
688070 Black housing amber lens with 2”-long stem
ENGINE
Replacement Parts
230267 Amber lens for custom bullet lights
230268 Red lens for custom bullet lights
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
688068
Custom Bullet Marker Lights
688067
Sold each.
Chrome
19355
Red (single filament bulb)
28002
Amber (single filament bulb)
28000
Red (dual filament bulb)
28005
Amber (dual filament bulb)
Black
688063
688065
688064
688066
WHEELS
TIRES &
BRAKES
280058
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
Red (single filament bulb)
Amber (single filament bulb)
Red (dual filament bulb)
Amber (dual filament bulb)
Bullet Lights with Mounting Bracket
Note: Designed as supplemental lighting ONLY, not to replace Original
Equipment running lights or turn signals.
Replacement Bulbs
27999
Single filament (box of 10)
31590
Dual filament (box of 10)
280055
These chrome plated bullet lights mount easily with a built-in mounting bracket. Includes single filament 12 volt, 8 watt bulb. Sold in pairs.
280055Red
280058Amber
688067 Black bullet light red lens
688068 Black bullet light amber lens
4.29
GENERAL
CROSS
REFERENCE
LIGHTING
230360
688116
688117
Custom Chrome LED Bullet Lights
4
Classic bullet light design meets modern LED technology. Sold each.
Chrome Bullet Lights
688115 Bullet light chrome smooth clear lens
688116 Bullet light chrome smooth amber lens
688117 Bullet light chrome smooth red lens
688118 Bullet light chrome slotted clear lens
688119 Bullet light chrome slotted amber lens
688120 Bullet light chrome slotted red lens
Black Bullet Lights
688121 Bullet light black smooth clear lens
688122 Bullet light black smooth amber lens
688123 Bullet light black smooth red lens
688124 Bullet light black slotted clear lens
688125 Bullet light black slotted amber lens
688126 Bullet light black slotted red lens
Mini Stretch Bullet Lights
These bullet lights are perfect for additional lighting on your raked
out scooter. The sleek bullet shape combines function and style to
give it that added custom touch. 23 W globebulb needed. 1 1/4" x 3"
Sold each.
230360 Slotted with amber lens
230361 Slotted with red lens
230362 Smooth with amber lens
230363 Smooth with red lens
Replacement Lens
230358 Amber lens
230359 Red lens
“Midnight Black” Bullet Marker Lights
LED STAR Turn Signals
Beautiful chromed or flat black LED turn signals with star pattern LED
panel. Sold each.
681568 Chrome LED turn signals with E-Mark
681569 Flat black LED turn signals with E-Mark
688045 Flat black and chrome ring LED turn signals without E-mark.
Sold each.
4.30
The first thing that hits you when you pick up one of these black
beauties is the weight… they’re heavy duty Bro! Bodies are made
of thick cast aluminum, powder coated in a black satin finish and
feature amber lenses. Look outstanding on any style of ride. Marker
lights measure 3” long and 1 1/2” in Diameter. Single filament. Sold
as Pair. From the crew at Kijima in Japan.
632784 “Midnight Black” Bullet Marker Lights. Amber
LIGHTING
APPAREL
SEATS &
BAGS
654143
FOOT
CONTROLS
654064
HAND
CONTROLS
654063
Ness “Fire Ring” LED Kits for Factory Turn Signal Housings
• The dual function LED design features a billet aluminum ring that is integrated
into the lens. Each billet ring includes 7 exposed amber LED’s to work as running
lights. Behind the lens is cluster of LED’s for turn signal functions. These fit all
front applications with a light socket for an 1157 type bulb
• The single filament design has the Fire Ring LED’s and the cluster of LED’s behind
the lens light as one. These are for rear turn signal applications with a light socket
for an 1156 type bulb. Simple plug and play installation
• Sold in pairs
NOTE: A load equalizer will need to be purchased separately for your year and application.
654061
654062
654063
654064
654143
654144
LIGHTING
ELECTRICAL
EXHAUST
Red lens kit, chrome ring, red LED single
Red lens kit, black ring, red LED single
Amber lens kit, chrome ring, amber LED dual
Amber lens kit, black ring, amber LED dual
Red lens kit, chrome ring, red LED dual
Red lens kit, black ring, red LED dual
INTAKE
ENGINE
Donnie Smith Mini Marker Lights
Rounded profile and smooth, half-moon lenses
define these versatile marker lights. They look
great on everything from fender struts to hard
bags. They mount to any flat surface, and use
the small, wedge-type single filament bulbs.
Comes with both amber and red lenses, mounting
hardware and rubber base gasket. 1" diameter
lens, 3 1/4" overall length. Sold in pairs.
330790 Donnie Smith marker light, single
filament, chrome
688062 Donnie Smith marker light, single
filament, black
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
Note: Designed as supplemental lighting ONLY, not to replace
Original Equipment running lights or turn signals.
WHEELS
TIRES &
BRAKES
CHASSIS
Mirage Marker Lights
Our 12-volt marker lights were designed by the styling team at Custom Chrome and
feature die-cast construction, flawless chrome-plating and a terrific look. Single or
twin bulb versions with red or amber lenses. Mount flush to flat surfaces like struts
or the sides of fenders.
SHEETMETAL
Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running lights or turn signals.
Marker Lights (sold in pairs)
Chrome Mini Hot Spot Indicator
Lights
These sleek little lights are a perfect fit on your
fender struts or any flat surface on your bike.
They contain a single filament bulb and include a
rubber gasket and mounting hardware.
610490 Mini Hot Spot Indicator, Amber Lens. Sold
as a pair
Red
Price
Amber
INSTRUMENTS
& GAUGES
Price
09110
09111
Single bulb
09112
09113
Twin bulb
GENERAL
Replacement Parts
09101
09104
Amber lens (sold each)
CROSS
REFERENCE
4.31
LIGHTING
15083
4
688019
Side View Marker Lights by Darrell Hayes
Chrome or black 12 volt dual bulb marker lights mount to 35 mm, 39
mm or 41 mm fork tubes with integral bracket and included spacers
and hardware. Sold in pairs.
15083
Chrome side view marker lights
688019 Black side view marker lights
Custom Marker Lights by Darrell Hayes
Two-piece housings clamp securely to the fork tubes and include
plastic sleeves for universal attachment to 35 mm, 39mm or 41 mm
fork tubes. They feature amber lenses with single or twin singlefilament 12-volt bulbs (will not work with fork tins, or aluminum
headlight housings).
15081
Kit with single bulb lights (sold in pairs)
15082
Kit with twin bulb lights (sold in pairs)
Replacement Parts
12551
Single-filament bulbs (#168) pack of 10
19327
15095
09040
15096
19328
Fender Marker Light Assemblies and Lenses.
These marker light assemblies and lenses have been used since 1980
on the front and rear fenders of many models. Sold each.
Rear Lenses
15096
Stock replacement red lens (repl. OEM 68046-79)
Swingarm Marker Lights
Increase rear visibility and style with our Bob McKay-designed
swingarm marker lights and end caps. Die-cast, chrome-plated
aluminum with chrome hardware, 12-volt bulbs, and both amber and
red lenses. They replace the Original Equipment rear axle adjusters
and swingarm end caps. Sold in pairs.
09040
Fit all Dyna Glide models from 91-05
93417
Replacement red lens
93420
Replacement amber lens
4.32
Front Lenses
15095
Stock replacement amber lens (repl. OEM 59180-80)
Complete Assemblies
19327
Front with amber lens (repl. OEM 59082-79)
19328
Rear with red lens (repl. OEM 59658-79)
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
ches t!
n
i
r
n
u
e fo quipme
r
a
s
tyle iginal E
s
d
e
r
rten than O
o
h
S
r
owe
r
r
a
n
HAND
CONTROLS
LIGHTING
ELECTRICAL
19246
Rear Turn Signal Mounting Bars
Available in shortened and stock lengths. Select the shortened bars to give your bike a cleaner look
by moving the turn signals closer to the bike, or choose the stock length to maintain the factory look.
Economical die-cast versions are available chromed or polished. Steel bars are chrome-plated and
designed to be much more resistant to breakage than the die-cast part.
Fits 4-speed FL Models from 74-84, FL Softail Models from 86-07 and FLT, FLHT, FLHS and
Road King Models from 91-08
Shortened
Price
19249
Stock
Length
19246
12254
n/a
EXHAUST
k
Stoc
INTAKE
ed
rten
Price
Die-cast chrome (repl. OEM 68510-74B)
Sho
ENGINE
Steel chrome
19249
Note: Installation of shortened turn signal bars may be in violation of FMVSS Standard #108.
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
654071
654072
660752
WHEELS
TIRES &
BRAKES
Ness Turn Signal
Mounts
• The perfect solution for
relocating your turn signals
off of your handlebars on
Dyna, FXR and Sportster
models
• Billet aluminum mounts
bring your turn signals in
close to your factory trees
for a clean look. Direct
bolt-on to your triple tree
pinch bolts
• Turn signal mounts can be
mounted to upper or lower
triple tree.
654071 Turn signal mount 39 mm chrome
654072 Turn signal mount 39mm black
CHASSIS
654071
SHEETMETAL
09149
Relocation Clamp Kits
Perfectly suited for use in relocating Original Equipment turn
signals from your handlebars or triple trees to your front forks.
They come complete with all necessary hardware and bolt-on in
minutes. Sold in pairs.
09148
Clamps for 39 mm forks
660753 Black clamps for 39 mm forks
09149
Clamps for 41 mm forks
660752 Black clamps for 41 mm forks
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.33
LIGHTING
4
Lowered Turn Signal Kit
This custom lowered turn signal kit relocates the turn signals from
the fender struts to a new, lower position, which provides more
clearance for installing saddlebags and gives a cleaner look. The
chrome turn signal mounting bar is 12” wide and threaded to accept
stock type turn signals, and fastens easily using the license plate
bracket mounting holes. Kit includes chrome turn signal bar, wiring,
and hardware. Turn signals sold separately. Fits FX and FXR models
73-99, XL 73-03.
380220 Replaces OEM 68512-89
Turn Signal Relocation Kit for Softail Models
Relocates the rear turn signals further back to allow for saddlebags.
Fits FX Softail and 4-speed FXWG models from 84-99.
330629 Replaces OEM 68548-87
F. Kodlin Billet Turnsignal Brackets
Get rid of those lame die cast stock brackets and add some class
to your Glide with these beautifully chromed billet front turn
signal brackets. Fits Touring Models 97-Up (except FLTR Road
Glide Models)
627395Chrome
627396 Chrome with black inserts
4.34
Ness Turn Signal
Mounts
• The perfect solution for
relocating your turn signals
off of your handlebars on
Dyna, FXR and Sportster
models
• Billet aluminum mounts
bring your turn signals in
close to your factory trees
for a clean look. Direct
bolt-on to your triple tree
pinch bolts
• Turn signal mounts can be
mounted to upper or lower triple tree.
654071 Turn signal mount 39 mm chrome
654072 Turn signal mount 39mm black
654071
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
Doss Marker Light Mirror Mounts
09152
HAND
CONTROLS
Mounting kit, Sold in pairs
LIGHTING
19237
Turn Signal Relocation Kit for Dyna Wide Glide
Models
ELECTRICAL
Chrome kit relocates the rear turn signals further out which allow
for saddlebags. Required when installing saddlebag support kit.
380202 Fits Dyna Wide Glide models from 93-99
EXHAUST
19238
Chrome Turn Signal Mounting Bracket
Everything necessary for installing turn signals on the front of 4- or
5-speed FL models from 68-92. The universal mounting clamp permits
installation on a variety of motorcycles.
19239
Turn signal mounting kit – includes one of CC #’s 19237 and
19238 (repl. OEM 68518-68)
19237
Standoff ONLY (repl. OEM 68519-68) sold each
19238
Spotlamp housing mounting clamp ONLY (repl. OEM 68795-68)
sold each
INTAKE
19244
19245
ENGINE
GASKETS
19241
TRANSMISSION
& CLUTCH
19236
19240
19242
DRIVELINE
Chris Products Turn Signal Mounts
Turn Signal
Relocation
Brackets for
Springer Softail
Models
A wide selection of chrome turn signal mounting components to
fit most models from 73-03. Sold each.
19240
Clamp with screws (repl. OEMs 68487-82, 68486-82A)
19241
Rear support with screw (repl. OEM 68480-73)
19236
Rear support for Sportster models from 94-03 (repl. OEM
68480-94)
19230
Threaded rod for CC #19236 support (not shown)
19242
Bracket between signal and bar clamp (repl. OEM 68477-73)
WHEELS
TIRES &
BRAKES
19244
19245
SHEETMETAL
Rear turn signal threaded stud (repl. OEM 68493-87)
Same as CC #19244 but moves signals 1/2" closer to bike
Chrome steel brackets
provide an alternative
mount for stock or
custom turn signals or
marker lights. Sold in
pairs with hardware.
13257
Fits all Springer
Softail models
from late 88-12
(lights not
included)
CHASSIS
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.35
LIGHTING
688138
688137
688135
4
688141
688136
688140
688139
Chrome Turn Signal Relocation Kits
Make room for those big saddle bags with these comprehensive relocation kits. They come with all necessary hardware.
688135 Relocation kit to mount turn signals on license bracket XL, FXD, FLST (OEM 68372-02A)
688136 Relocation kit for 00-13 Softail except FXSTD, FLSTC (OEM 53820-00)
688137 Relocation kit for 03-13 FXST, FLSTF, FLSTSB, FXSTSB (OEM 53959-06)
688138 Relocation kit for 02 Softail except FXSTD, FLSTC (OEM 53859-02A)
688139 Relocation kit for 04-13 XL models (OEM 68747-04)
688140 Relocation kit for 94-03 XL models (OEM 68485-04)
688141 Studs for 688140 when used on 02-03 XL models
4.36
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.37
LIGHTING
Ness Radius LED License Plate Frame
• Great radius lines add style
• Hidden mounting for clean look
• Lighted LED License frame functions as brake light,
taillight and license plate light
• Chrome plated die cast construction.
654065 Radius LED license frame
654066 Replacement LED light
4
License Plate Frame with Marker Lights
Chrome license plate frame is made of precision
die-cast aluminum and features integrated vertical
marker lights. Amber lenses with single filament
12 volt bulbs can be wired as marker lights or turn
signals.
240176 Chrome license frame with marker lights
688073 Black license frame with marker lights
4.38
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
621120
HAND
CONTROLS
LIGHTING
Polished ‘Skull’ License Plate Frame
Sand cast in aluminum from a hand-carved mold and polished, this
frame has impressive detail. Fits the standard 7" x 4" license plate
used in most states.
37857
Sold each
621121
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
621123
Chrome ‘Live To Ride’ License Plate Frame
TRANSMISSION
& CLUTCH
Fits most license plates measuring 7"-wide x 4"-tall whose
mounting hole dimensions are 5 3/4" x 2 3/4".
19105
Sold each
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
621122
SHEETMETAL
INSTRUMENTS
& GAUGES
Chrome License Plate Frames
Choose your poison. We have a license plate frame for every taste!
Sold each.
621120 Skull & Flames license frame
621121 Chain license frame
621122 Viper license frame
621123 Indian license frame
GENERAL
Taillight Brackets for Fat Bob Fenders
Accurate reproductions of the Original Equipment brackets fitted
to Softail and 4-speed FXWG models with Fat Bob fenders from
80-99.
26494
Chrome (replaces OEM 59993-80TA)
CROSS
REFERENCE
4.39
LIGHTING
19885
15954
688074
Chrome License Bracket
4
Chrome or Black License Plate Accessories
Backing Plate
19885
Chrome, fits plates measuring 7"-wide x 4"-tall whose hole
dimensions are 5 3/4" x 2 3/4"
Chrome reproductions of the license plate brackets for most models
from 55-Up. Available in both two or three hole versions.
19773
Chrome license bracket, replaces OEM 59995-55 (early 2-hole)
19770
Plate Frame
15954
Chrome fits plates measuring 7"-wide x 4"-tall whose hole
dimensions are 5 3/4" x 2 3/4"
688074 Black, fits plates measuring 7” wide x 4”-tall whose hole
dimensions are 5 3/4 x 2 3/4
Chrome License Plate Trim Kit
This chrome license plate frame measures 7 1/4" x 4 1/4". Mounting
holes measure 5 3/4" x 2 3/4" center-to-center.
240136 License plate trim set (includes frame, backing plate and
mounting screw set)
Laydown License Bracket for Touring Models by
Darrell Hayes Custom Concepts
Dramatically improved rear styling on Touring models with the
angled license bracket and rear fender brace assembly. It moves the
license plate both closer to the fender and angles it for a smoother,
flowing look (brackets do not work with luggage rack or oversize
license plates).
Angled License and Rear Fender Brace Assembly
15669
Fits all Touring models from 97-07 except FLHX models (repl.
OEMs 53422-97, 53376-97)
15668
Fits Road King and FLHS models from 93-96; FLT and FLHT
models from 95-96 (repl. OEM 47400-92)
Replacement Parts
15667
Angled license mounting plate ONLY. Fits Road King models
from 97-07 except FLHX models (repl. OEM 53376-97)
Note: The Original Equipment fender brace is longer than that in the kits. When installed
on the stock brace, the plate extends further to the rear and larger plates may contact the
taillight.
Chrome Cover for Rubber License Plate Frame
Wedge
Covers the rubber mounting wedge on one of Custom Chrome’s alltime favorite accessories – the adjustable ‘Laydown’ license plates.
14200
Rounded-corner cover
4.40
LIGHTING
APPAREL
13199
SEATS &
BAGS
14199
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
‘Laydown’ License Plate Mounts
Close-fitting, one-piece chrome-plated and black license plate mounts which can be used to replace the multi-piece license plate mount and
bracket on the rear fender. Two rubber spacers isolate the license plate from vibration, and permit the mount to be tailored to the profile of
the fender for a much tighter, cleaner look. They mount directly to the standard hole pattern on all rear fenders (except Fat Bob) from 55-Up
and come complete with mounting hardware.
13199
Chrome original-style
660751 Black original-style
14199
Chrome Pyramid-style
Replacement Spacers
13299
Set of replacement rubber isolation spacers. One each flat and wedge style
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Curved ‘Laydown’ License Plate Mount
Curvaceous cousin to our popular CC #13199, the original laydown license mount. Not only
can this mount be angled to the profile of the fender, it also follows the radius, for a tighter,
cleaner look. Fits most models Includes hardware and rubber isolation spacers.
14205
Chrome curved ‘laydown’ license plate bracket
660750 Black curved ‘laydown’ license plate bracket
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
4.41
LIGHTING
604952
4
Lighted Skull License Plate Screws
Decorative license plate mounting screws that can be activated with
the switch that is included or wired into your brake light circuit. Sold
in pairs.
604952 Yellow skull license screws
604953 Red skull license screws
604954 Blue skull license screws
604955 Green skull license screws
688046
License Plate Reflectors
They measure 3/4" across the face and are ideal for mounting license
plates. A 5/8"-long stud with a tension spring and wing nut holds the
plate firmly in place.
19780
Blue (display tub of 40)
19779
Red (display tub of 150)
19781
Red (display tub of 40)
688047
688048
Inspection Tag Plates
688049
Designed to accommodate state inspection tags, and can be used
for parking permits. Each one measures 3 1/2" square with 1/2" ID
mounting hole. Can be mounted to footpeg, or shock studs.
640052 Polished stainless steel
640053Chrome-plated
LED License Plate Lights
These license plate lights are available in two styles and two finishes.
Choose from chrome-plated or black finish and radius or cone
shaped. Sold each.
688046 Radius chrome light (ea)
688047 Radius black light (ea)
688048 Cone chrome light (ea)
688049 Cone black light (ea)
License Mounting Screws
240130
4.42
Mounting screw set. Includes 4 screws, acorn nuts and washers
Chrome License Plate Bolt Kit
Kit includes four buttonhead bolts, nylon-inserted lock nuts, washers
and wrench.
19768
Complete kit
LIGHTING
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
12V Two Pin Flasher Unit
Motogadget m-Stop Relay
The adjustable digital brake light modulator m-Stop increases your
driving safety. With different flashing modes your standard brake
light will be upgraded to a striking warning light. The subsequent
traffic will recognize faster and better when you are braking.
Reaction time of the vehicle driver behind you can be shortened and
a rear end collision accident could be prevented. The m-Stop is an
important extra of safety for all motorcycles, Quads, ATVs, Trikes etc.
Use as a Brake Light Modulator:
• incredibly small and lightweight - just a cable with a tiny device in
the size of a candy
• laying cables together with the m-Stop inside a handlebar, frame
tube or directly on the wiring loom
• choose from six different flash styles
• load independent operation (wide-range)
• suitable for all LED tail-light/brake-light units or standard brake
lights/bulbs very easy to install – just connect two wires
• short - circuit - proof
• automatic overload shut down
• safe against high voltage spikes
• no generation of heat during operation
• operating voltage from 5V to 18V
• also suitable for 6 V vehicle voltage systems
• instant and loss less brake light operation
• completely waterproof and shock resistant
Use as a Flashing Relay:
• completely load independent (wide-range relay) – always stable
and correct flash rate
• suitable for all flasher types: LED, Micro size, 10 Watt bulbs, 21
Watt bulbs
• perfect for custom bikes with limited space – no more clumsy OEM
flasher relay
• no bulky load resistors necessary
• it works with 1 or 2 or 4 flashers
• instant, loss less flash light operation
• very easy to install – just connect two wires
681989 MG RELAY m-Stop
Replacement 12V two pin bi-metal type flasher unit for all models
65-90 (except 89-90 Touring).
658050 12V flasher unit, Sold each.
LIGHTING
ELECTRICAL
681988
EXHAUST
INTAKE
ENGINE
Motogadget m-Flash Relay
• Incredibly small and lightweight - just a cable with a tiny device
the size of a mint
• Perfect for Custom Bikes with limited space – no more clumsy
OEM flasher relay
• Laying cables together with the m-Flash inside a handlebar,
frame tube or directly on the wiring loom
• Completely load independent (wide-range indicator relays) –
always stable and correct flash rate
• Suitable for all flasher types: LED, Micro size, 10 Watt, or 21 Watt
• No bulky load resistors necessary
• It works with 1 or 2 or 4 flashers in use
• Instant, loss less flash light operation
• Very easy to install – just connect the two wires
• Completely waterproof
• Short - circuit - proof
• Automatic overload shut down
• Safe against high voltage spikes
• Generates no heat during operation
• Operating voltage from 5V to 18V
• Also suitable for 6 V vehicle voltage systems
• Made by Motogadget in Germany
681988 MG RELAY m-Flash
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
m-Wave Flash Control Unit
• Incredibly small and lightweight
• Load independent
• Works with 2 or 4 flashers
• Suitable for LED and standard bulbs
• With fade in/out effect
652720 m-Wave, sold each
GENERAL
CROSS
REFERENCE
4.43
LIGHTING
Replacement Bulbs
ILLUS.
4
VOLTS
WATTS
AMPS
#1
12521
Part #
Price
Box of 10
PACK QTY.
S-8
CLASS
1154
ANSI #
6
–
2.63
21/3
C/P
D.C. Index
CONTACT
repl. OEM 68165-47
#1
12522
Box of 10
S-8
198/1157
12
–
2.25
32/3
D.C. Index
repl. OEM 68168-89
#1
12515
Card of 20
S-8
198/1157
12
–
2.25
32/3
D.C. Index
repl. OEM 68168-89
#1
15199
Box of 10
S-8
1157NA
12
–
2.25
32/3
D.C. Index
Amber
#1
15184
Box of 10
S-8
1157R
12
–
2.25
32/3
D.C. Index
Red
#1
15141
Box of 10
S-8
1157R
12
–
2.25
50/14
D.C. Index
Red Super Bulb
#1
12530
Sold each
S-8
1034/1157
12
–
2.25
50/14
D.C. Index
Super Bulb
#1
12531
Box of 10
S-8
1034/1157
12
–
2.25
50/14
D.C. Index
Super Bulb
#2
19098
Box of 10
S-8
–
12
23/8
–
–
D.C. Bay
#3
12547
Box of 10
S-8
199/1156
12
–
2.25
32
S.C. Bay
repl. OEM 68572-64B
Amber
#3
15198
Box of 10
S-8
1156NA
12
–
2.25
32
S.C. Bay
#4
31590
Box of 10
G-6
–
12
–
–
21/6
D.C. Index
NOTES
#4
330269
Box of 10
–
–
12
20/5
–
–
D.C. Index
#5
27999
Box of 10
G-6
–
12
8
–
–
S.C. Bay
#6
12551
Box of 10
T-31/4
168
12
–
.35
3
Wedge-2
#6
12552
Box of 10
T-31/4
161
12
–
.19
1
Wedge-2
#7
12520
Box of 10
G-31/2
53
12
–
.12
1
Mini Bay
#8
27823
Box of 10
–
–
12
3
–
–
S.C. Bay
#9
27824
Box of 10
–
–
12
3
–
–
Push-In
#10
12544
Sold each
RP-11
–
6
25/25
–
–
D.C. Prefocus
#10
12543
Sold each
RP-11
–
12
35/35
–
–
D.C. Prefocus
#11
12476
Sold each
RP-11
–
6
25
–
–
S.C. Prefocus
repl. OEM 68715-49
#11
12477
Sold each
RP-11
–
12
35
–
–
S.C. Prefocus
repl. OEM 68715-64
#12
12527
Sold each
–
H-4
12
60/55
–
–
3-Lug
#12
15112
Sold each
–
H-4
12
60/55
–
–
3-Lug
Rainbow
#12
12529
Sold each
–
H-4
12
100/55
–
–
3-Lug
100-watt high beam
#13
26368
Sold each
–
–
12
–
–
–
Two Wire
Green - 68574-86
#13
26369
Sold each
–
–
12
–
–
–
Two Wire
Red - 68489-86
#13
26370
Sold each
–
–
12
–
–
–
Two Wire
Amber - 67864-86
#13
26371
Sold each
–
–
12
–
–
–
Two Wire
Blue - 67862-86
4.44
Dual filament
High-beam indicator
repl. OEM 67750-35
LIGHTING
APPAREL
SEATS &
BAGS
1
Double Contact
Bayonet Candelabra Index
FOOT
CONTROLS
Double Contact
Bayonet Candelabra
2
HAND
CONTROLS
LIGHTING
ELECTRICAL
3
Single Contact
Bayonet Candelabra
Double Contact
Bayonet Candelabra Index
4
EXHAUST
INTAKE
ENGINE
5
Single Contact
Bayonet Candelabra
Wedge-2
6
‑Miniature Bayonet
7
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
8
Single Contact
Bayonet Candelabra
9
Push-in
10
Double Contact
Candelabra Prefocus
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
11
Single Contact
Candelabra Prefocus
12
3-Lug
2-Wire
CROSS
REFERENCE
13
4.45
LIGHTING
17
16
4
15
14
Replacement Sealed Beams
ILLUS.
Part #
Price
18
PACK QTY.
CLASS
ANSI #
VOLTS
WATTS
CONTACT
NOTES
#14
N/A
Sold each
PAR-56
6006
6
50/40
3-Lug
repl. OEM 67717-48B
#14
688160
Sold each
PAR-56
6014
12
60/50
3-Lug
repl. OEM 67717-64
#14
688161
Sold each
PAR-56
6014
12
130/110
3-Lug
#14
688158
Sold each
PAR-56
H6024
12
65/40
3-Lug
H-4/Halogen
#14
688159
Sold each
PAR-56
H6024
12
130/110
3-Lug
H-4/Halogen
#15
12508
Sold each
PAR-46
H4467
12
50/35
3-Lug
H-4/repl. OEM 67698-81A
#16
26400
Sold each
PAR-36
4454
12
30/30
3-Lug
Hi-Lo Beam
#17
688150
Sold each
PAR-36
4415A
12
35
Screw
Amber
#17
688151
Sold each
PAR-36
4415A
12
50
Screw
Amber
repl. OEM 68674-69
#17
688154
Sold each
PAR-36
4449
12
30
Screw
#17
688155
Sold each
PAR-36
4449
12
50
Screw
#18
688152
Sold each
PAR-36
4416A
12
30
Screw
Amber
#18
688153
Sold each
PAR-36
4416A
12
100
Screw
Amber
#18
688156
Sold each
PAR-36
4416
12
30
Screw
#18
688157
Sold each
PAR-36
4416
12
100
Screw
641989
641988
Compartment Light for Tour Paks and Trunks by
Hardbagger
ROTO 360 LED Light
This versatile low profile LED light will provide years of
operation with long-life batteries (included). Unit offers
full 360 swivel rotation, 45 degree tilt and can be hook
and loop or magnetic installed. Makes a great low cost
lighting solution for your Hard Bag or Tour Pack.
641986 Roto LED light (each)
4.46
641988 is a 6 V surface mount, battery energized lamp that requires no wiring or
labor to install. It requires four AAA batteries (not included).
641989 is a 12 volt, surface mount dome light with an on-off switch and battery
fused wire harness assembly. The efficient circuit provides longer life and
protection. The eight (8) SMD type LED array allows for a wider light output
dispersion angle up to 150°
641988 LED battery powered compartment light (ea)
641989 LED 12V compartment light (ea)

Lighting - Rollies Speed Shop

Transcription

Similar documents

The author has no financial interest to disclose. How Many of your

Givi V46 reflective decal installation instructions:

647 $197 $377 $797 $1447 $417 30%OFF $647

BRANDONI Cat./List. USA

HomeSUITEHome - International Builders` Show

The Architecture of the Model

CITY SCHLEPPAGE

`04 Acura TSX Projector retrofit into `98-`02 Camaro

The Discovery of New Elements

Luxtec Surgical Vision Systems

Lighting - Custom Bikes by Mike