AR15 / M16 / M4 1-8 BIPODS / EQUIPMENT MOUNTS 17

AR15 / M16 / M4
1-8
AK47 / SA85 / GALIL
9-11
SHOTGUN
12-13
MP5 / G36 / G3
14
FORWARD GRIPS
15
LIGHT / LASER MOUNTS
16-17
BIPODS / EQUIPMENT MOUNTS
17
TACTICAL GEAR
18-19
ACCESSORIES
20-21
1
AR15 / M16 / M4
Buttstocks
www.commandarms.com
SRS
ADVANCED SNIPER STOCK
The result of years of research and development. Designed in conjunction with special units of the
IDF (Israel Defense Force) this sniper stock is ideally suited to meet the demands of the precision
marksman community. Proven to provide rapid target acquisition, faster and more accurate follow up
shots, and quicker target-to-target attainment. Completely adjustable, featuring a rear-folding leg that
converts a rifle with a bipod into a stable shooting platform. Pat pending.
s
s
s
s
10 Position push button adjustable length of pull of stock
New push button controlled fully adjustable cheek rest for height & eye relief with optics
Vertically adjustable rubber butt pad
Quick release push button leg extension with fine height adjustment button and
micro adjustment ring
s Push Button leg locks in 3 positions: 0˚, 45˚, and 90˚
s 2 quick release sling mount points
#SRS
#SRSNL
#AR30SA
Sniper Stock
Sniper Stock (No Leg)
Sniper Stock Adaptor for Armalite AR30
black
tan
od green
Weight
Length of
Pull
SRS
2.05 lb
11-14.5 in
2.25 in
1.5 in
2.25 in
3.5-7.25 in
ARS
1.95 lb
9-11.5 in
2.25 in
1.5 in
2.25 in
3.5-7.25 in
Model
Horizontal
Adj.
Vertical
Cheek Adj.
Vertical Butt
Plate Adj.
Leg Length
ARS
SHARP SHOOTING STOCK
Specifically engineered for the Designated Marksman. The ARS allows the user to provide enhanced rapid
accurate fire. Shorter length specifically designed for M4 carbine and similar collapsible tubes.
s
s
s
s
10 Position push button adjustable length of pull of stock
New push button controlled fully adjustable cheek rest for height & eye relief with optics
Vertically adjustable rubber butt pad
Quick release push button leg extension with fine height adjustment button and
mirco adjustment ring
s Leg locks in 3 positions: 0˚, 45˚, and 90˚
s 2 quick release sling mount points
#ARS
#ARSNL
black
Sharp Shooting Stock
Sharp Shooting Stock (No Leg)
tan
od green
CBS
COLLAPSIBLE BUTTSTOCK
Upgrade your standard collapsible buttstock with our innovative, six-position collapsible stock.
s Ambidextrous side snap-tight latch compartment provides storage for 4 CR123 batteries
s Side Picatinny rail allows addition of Adjustable Cheek Piece (ACP) or Mag Holder (MPS)
s Rubber non-slip buttpad with tapered angle, allows faster shouldering and increased comfort
with body armor
s 2 ultrasonically welded metal quick release sling mount points
s Available with tube assembly: Receiver extension, recoil buffer/spring assembly, locking
ring, and receiver plate
#CBS
#CBSM
#CBST
Collapsible Stock
Collapsible Stock for MIL-SPEC Tubes
Collapsible Stock w/ Tube Assembly
AR15 / M16 / M4
1.866.611.9576
I
Buttstocks
267.803.1517
SST1 / SST2
COLLAPSIBLE STOCK SADDLE
Stock Saddle provides a proper cheek weld for AR15 and similar collapsible stocks at an affordable
price. Easily installs onto M4 style stocks.
s A proper cheek weld allows for quicker target
acquisition and comfort
s Securely attaches to most collapsible stocks
with supplied hardware
s Made from lightweight, fiberglass reinforced
plastic for strength functionability
#SST1
#SST2
#SST1C
black
s Waterproof, sealed battery compartments
hold four AA, six CR123 batteries, or optional
OTIS .223 cleaning kit
s Rubberized model adds a rubberized coating
for increased comfort and control
s Available with OTIS cleaning kit
Collapsible Stock Saddle
Collapsible Stock Saddle (Rubberized)
Collapsible Stock Saddle with OTIS .223 Cleaning Kit
tan
od green
ACP
ADJUSTABLE CHEEK PIECE
Fully adjustable cheek piece designed to mount on the CBS collapsible stock’s Picatinny rail. Pat pending.
s Adjustable for height with thumb knob
s Allows proper eye relief of scoped rifles by
moving horizontally along Picatinny rail
s Totally ambidextrous
#ACP
black
s Manufactured from durable polymer with
smooth finish
s Compatible with all CBS style buttstocks
(AR15, AK47, and Shotgun)
Adjustable Cheek Piece
tan
od green
PRFCS
PICATINNY RAIL FOR COLLAPSIBLE STOCK
Still want an ACP adjustable cheek piece but don’t have our CBS buttstock? No problem, we have your
needs covered. Simply add the PRFCS to your existing M4 style collapsible stock. Pat Pending
s The Picatinny Rail for collapsible stocks
attaches to most collapsible stocks
s Provides a secure mounting point for the ACP
adjustable cheek piece or MPS mag holder
#PRFCS
#PRFCSL
#PRFCSCOMBO
#PRFCSLCOMBO
black
s
s
s
s
High density polymer construction
2 1/4” Picatinny rail
Fast and easy installation
Available for right or left handed shooters
Picatinny Rail for Collapsible Stocks
Picatinny Rail for Collapsible Stocks (Left)
Picatinny Rail for Collapsible Stocks & ACP
Picatinny Rail for Collapsible Stocks & ACP (Left)
tan
od green
CP1 / CP2
SNAP ON CHEEK PIECE
Raise your eye level for proper sight or optic alignment.
s Installs instantly on most collapsible stocks
s Made of rugged glass reinforced polymer to
withstand harsh tactical conditions
#CP1
#CP2
#CP
black
s No tool installation, snaps into place
s Fits “ribbed” collapsible style stocks
0.7” Raised Cheek Piece
1.25” Raised Cheek Piece
Set of 2 Cheek Pieces (CP1 & CP2)
tan
od green
2
3
AR15 / M16 / M4
Rail Systems
www.commandarms.com
X6 / X6L
ALUMINUM 6 RAIL HANDGUARD
Aluminum two-piece handguard provides the ultimate rail system. Maximum accuracy and stability
are provided during the toughest workout of your weapon due to the unique front sight mounting
system. Patented.
s Four fixed MIL-STD 1913 rails provide a solid platform for mounting Picatinny accessories
s Two fixed MIL-STD 1913 front sight mini rails allow mounting of lights or lasers
s Easily installs using existing delta ring and tightens to the front sight, utilizing 6 screws to
eliminate movment and maintain a consistent zero
s Top rail is parallel to flat top rail, ideal for mounting optics
s CNC machined from aviation grade aluminum, Reference markings assist in
accessory remounting, Rail covers included
s Accepts optional FL1 front sight rail
#X6
#X6L
Carbine 6 Rail Aluminum Handguard
Rifle 6 Rail Aluminum Handguard
black
socom tan
od green
M44SM / M44MM
ALUMINUM 4 RAIL HANDGUARD
Aluminum two-piece handguard provides a four sided Picatinny rail system. Patented.
s Lightweight aluminum construction
s Provides a secure and platform for mounting
Picatinny accessories
#M44SM
#M44MM
black
s Screwless installation, held in place by Delta
ring and handguard cap
s Thermal rail covers included in carbine model
Carbine 4 Rail Aluminum Handguard
Mid Length 8” 4 Rail Aluminum Handguard
socom tan
M44S / M44L
4 RAIL HANDGUARD
Polymer two-piece handguard provides a four sided Picatinny rail system. Patented.
s Screwless installation, held in place by Delta
ring and handguard cap
s Constructed of high-density polymer
#M44S
#M44L
black
s Stainless steel heat shields dissipate high
heat from rapid fire
Carbine 4 Rail Handguard
Rifle 4 Rail Handguard
tan
od green
M33
2 RAIL HANDGUARD
Polymer two piece handguard provides a two sided Picatinny rail system. Handguard can be
mounted so the rails are in a horizontal or vertical position. Patented.
s Screwless installation, held in place by Delta
ring and handguard cap
s Constructed of high density polymer
#M33
black
Carbine 2 Rail Handguard
tan
od green
s Stainless steel heat shields dissipate high
heat from rapid fire
s Rail covers included
AR15 / M16 / M4
1.866.611.9576
I
267.803.1517
TRM / TRM2 / TRM3
TRIPLE RAIL MOUNT SYSTEM
Versatile polymer triple rail mount system is available as a single 3” Picatinny rail (TRM), two 45˚
Picatinny rails (TRM2), or combined to provide a triple rail mount (TRM3).
s
s
s
s
s
Allows easy light operation while using a vertical grip and light mount
Rails can be used independently of each other
Rail will not interfere with iron sights and fits most standard handguards
Quickly mounts on most upper or lower standard handguards
Constructed of high density polymer
#TRM
#TRM2
#TRM3
black
3” Center Picatinny Rail
Two 2.5” long 45˚ Picatinny Rails
Triple Rail System(TRM & TRM2 combined)
tan
od green
PR
LONG SINGLE RAIL ATTACHMENT
Attach a 5 5/8” Picatinny rail to your existing handguard with this single rail attachment. Easily
converts your handguard into a handguard with a Picatinny rail for grips, lights, lasers and more.
s Constructed of High density polymer
s Fast and easy installation, handguard not included
s Fits standard and Thickened Heat shield
#PR
Long Single Rail Attachment for Handguard
black
tan
od green
SR
LIGHT / LASER RAIL ATTACHMENT
Attach a light or laser to your factory handguard using this mini Picatinny rail attachment.
s
s
s
s
1 1/2” rail is ideal for light or laser mounts due to its small size
Constructed of High density polymer
Fast and easy installation, handguard not included
Fits Standard and Thickened Heat Shield
#SR
Light / Laser Rail Attachment
black
tan
od green
TPR15X / TPR15P
FRONT SIGHT MOUNTED RAIL
Front sight mounted rail securely attaches to AR15 style front sights.
s
s
s
s
s
Provides two 2 1/4” four position rails for laser and light equipment to be mounted
Available in CNC aviation aluminum or polymer versions
Aluminum version accepts Forward Barrel Rail (FL1) creating a three rail front sight system (X3)
Easy to fit/remove and secured by Allen bolts
Polymer version constructed of high density polymer
#TPR15X
#TPR15P
black
Aluminum Front Sight Mounted Rails
Polymer Front Sight Mounted Rails
Rail Systems
4
s Adjustable rear sight; windage
and elevation clicks
s Long range sight adjustment
s High quality locking plate
s Thumbnuts provide superior
retention
Aluminum carry handle for flat top receivers.
#CH
Removable Carry Handle
Aluminum multi-position forward barrel rail. Easily mounts to X6, X6L and
TPR15X forward of the front sight, enabling the user to mount a light or laser
directly inline above the barrel.
s
s
s
s
s
2 3/4” seven position Picatinny rail
Adjustable for height above barrel
CNC aluminum construction
Attaches to X6 handguards to create a 7 rail system
Attaches to TPR15X to create a 3 rail front sight system
#FL1
#X6X
#X6XL
#X3
black
s Securely mounts inside carry
handle groove with thumbnut
s See through design allows use
of iron sights
s Rail measures 5.25”
Aluminum mount allows the addition of an optic or red dot sight to the carry handle.
#CHM
Carry Handle Mounted Rail
black
Aluminum Forward Barrel Rail
Carbine 7 Rail Aluminum Handguard
Rifle 7 Rail Aluminum Handguard
Front Sight 3 Rail Aluminum System
black
s Securely mounts inside carry
handle groove with thumbnut
s See through design allows use
of iron sights
s Long rails measure 5.5”
Aluminum mount allows the addition of an optic or red dot sight to the carry handle
on two levels. Incorporates two side mini rails for the addition of a light and laser.
#CHMF
Carry Handle Mounted Rail with Forward Rail
black
Transforms AR15/M16 bayonet lug into a Picatinny rail section, allowing the
addition of a light or laser. New longer 1.75” rail length.
s Securely mounts with two
thumbnuts and slide plate
s Compatible with STANAG,
Picatinny and Weaver
s Rail measures 5.625”
s Easy to fit and remove, secured by Allen head screw
s CNC machined from aviation grade aluminum
#TM16FA1
Aluminum Bayonet Lug Mount
black
Aluminum mount attaches to flat top receiver and offers a 1” raised optics platform
allowing sight over the fixed front sight.
#CHMF
Carry Handle Mounted Rail with Forward Rail
black
AR15 / M16 / M4
1.866.611.9576
I
Magazines / Magazine Accessories
267.803.1517
6
CDMAG
COUNTDOWN MAGAZINE
Always know how many rounds are left at a glance.
The innovative Countdown magazine has a color-coded indicator on the rear of the magazine showing
the exact number of rounds left in the magazine. 30-20 rounds have a green background 19-10 rounds
have a yellow back ground and 9-0 rounds have a red background. In addition, there is a second indicator on the bottom of the magazine so the capacity of the magazine can be determined. The operator
can easily determine remaining rounds in magazine, without removal from rifle. Count mechanism
does not interfere with the disassembly of the magazine. This strong lightweight 30 round polymer
M16 / AR15 magazine offers 100% reliability with a non-tilting follower and a corrosion resistant
stainless steel spring.
s Rear visual indicator shows remaining rounds
s Color coded for quick reference; 30-20 (green) 19-10 (yellow) 9-0 (red)
s Second visual indicator on bottom of magazine for color reference ONLY; allowing the
operator to determine the approximate capacity of the magazine
s Operator can easily determine remaining rounds in magazine, without removal from rifle
s Mechanism does not interfere with magazine disassembly
s Strong lightweight 30 round polymer M16 / AR15 magazine
s Non-tilting follower
s Corrosion resistant stainless steel spring
#CDMAG
black
30 Round M16 / AR15 Polymer Countdown Magazine
tan
od green
MAG
CDMMC
POLYMER MAGAZINE
COUPLER FOR POLYMER MAGAZINE
Super Strong lightweight 30 round polymer .223 AR15 magazine.
Magazine coupler doubles ammunition capacity and allows faster reloading.
s Non tilting stable follower
s Corrosion resistant stainless steel spring
s High density polymer construction
s Screw tightened
#MAG
#CDMMC
black
30 Round .223 Polymer Magazine
tan
od green
black
Coupler for Polymer Magazine
tan
od green
7
AR15 / M16 / M4
Magazine Accessories
www.commandarms.com
M16MC
ML556
M16 MAGAZINE COUPLER
M16 MAGAZINE LOADER
Joins two M16 style magazines, expanding ammunition
capacity and allowing faster reload time. Patented.
Magazine loader for .223 cal / 5.56mm ammunition. Designed
to easily load single magazines with speed and efficiency.
s
s
s
s
s Lightweight and compact design
s Thumb lever easily loads each round
s Works with M16/AR15, Ruger Mini-14 and similar
Fits .223, 5.56 NATO, AR15/M16 and Ruger Mini-14
Manufactured from high density polymer
Will not scratch or deform magazines
Screw tightened
#M16MC
black
M16 Magazine Coupler
tan
od green
#ML556
M16 Magazine Loader
black
MPS
MPC
M16 PICATINNY MAGAZINE HOLDER
MOLLE MAGAZINE POUCH
M16 magazine holder clamps onto any Picatinny rail allowing the operator to
position a spare magazine for quick access, reducing reload time.
Magazine pouch capable of
holding up to three 30 round
M16/AR15 style magazines
or two coupled magazines.
Velcro and front mounted side
release buckle keep magazines
stored securely (Velcro can be
disabled for silent use).
s Ideal for use with CBS collapsible stock
s No straps to contend with, MPS magazine holder retains mag firmly while
allowing removal with the touch of a finger on the ergonomic lever
s Fully ambidextrous design, accepts M16 / AR15 style magazines
Able to be belt mounted using RC1 / RC2 belt clip
s High density polymer construction
#MPS
black
M16 Magazine Coupler
tan
s Drain hole allows moisture and debris to escape
s Constructed of heavy duty nylon
s MOLLE and ALICE compatible
#MPC
black
MOLLE Magazine Pouch
tan
od green
M16C
MMC
M16 HORIZONTAL MAGAZINE CARRIER
MAGAZINE DUST COVER
Safely carry your M16/AR15 magazine while still having quick access. Carrier
mounts inside any M16/AR15 style magazine well.
Rubber magazine dust cover for AR15 / M16.
s Available in vertical or horizontal carry
s High density polymer construction
#M16CH
#M16CV
black
M16 Horizontal Magazine Carrier
M16 Vertical Magazine Carrier
#MMC1
#MMC2
#MMC4
black
Single .223 Magazine Dust Cover
Two .223 Magazine Dust Covers
Four .223 Magazine Dust Covers
AR15 / M16 / M4
1.866.611.9576
I
267.803.1517
G27
TACTICAL PISTOL GRIP
Tactical pistol grip for M16/AR15, replaces standard grip in moments.
s Increases operator comfort and weapon performance, providing more control during firing
while reducing fatigue
s Finger grooves, palm swell and contoured backstrap allow for a powerful grip
s Mottled surface area allows for a secure grip when in use or when wet
s Grip base offers an easily accessible secured storage compartment for a small cleaning kit
or other items
#G27
#G27C
black
Tactical Pistol Grip
Tactical Pistol Grip w/ OTIS .223 Cleaning Kit
tan
od green
UPG16
INTERCHANGEABLE PISTOL GRIP
Six piece rubberized interchangeable pistol grip easily replaces standard grip, incorporating multiple
finger groove and back strap inserts (3 each), allowing the operator to customize their grip to fit all
hand sizes for maximum comfort and control.
s
s
s
s
s
Provides increased control during firing and reduces fatigue
Finger grooves, palm swell and contoured backstrap allow for an increased powerful grip
Easily interchangeable front and rear rubberized grip inserts mount securely in place
Mottled surface minimizes risk of slippage when wet
Capped storage for small items or an optional cleaning kit
#UPG16
#UPG16C
black
Interchangeable Pistol Grip
Interchangeable Pistol Grip w/ OTIS .223 Cleaning Kit
tan
od green
UPGS
TARGET SHOOTING STAND
Provides a solid platform for hand support during sustained target exercises. Flat surface helps
stabilize and support rifle. Fits UPG16 grip.
s Constructed of high density polymer
s UPG16 grip sold separately
#UPGS
black
Target Shooting Stand
tan
od green
Pistol Grips
8
9
AK47
Buttstocks
www.commandarms.com
MARS / SARS
SHARP SHOOTING STOCK
Turn your AK47 into a stable shooting platform with this sharp shooting sock. The MARS / SARS allows
the user to provide enhanced rapid accurate fire. Shorter length specifically designed for collapsible tubes.
Available for milled and stamped receivers.
s
s
s
s
10 Position push button adjustable length of pull of stock
New push button controlled fully adjustable cheek rest for height & eye relief with optics
Vertically adjustable rubber butt pad
Quick release push button leg extension with fine height adjustment button and
micro adjustment ring
s Leg locks in 3 positions: 0˚, 45˚, and 90˚
s 2 quick release sling mount points
#MARS
#MARSNL
#SARS
#SARSNL
AK47 Milled Sharp Shooting Stock
AK47 Milled Sharp Shooting Stock (No Leg)
AK47 Stamped Sharp Shooting Stock
AK47 Stamped Sharp Shooting Stock (No Leg)
black
tan
od green
Model
Weight
Length of
Pull
Horizontal
Adj.
Vertical
Cheek Adj.
Vertical Butt
Plate Adj.
Leg Length
ARS
1.95 lb
9-11.5 in
2.25 in
1.5 in
2.25 in
3.5-7.25 in
ACAKC / CAKC
AK47 COLLAPSIBLE BUTTSTOCK
Upgrade your AK47 buttstock to our innovative, six-position collapsible stock.
s Side snap-tight latch compartment provides
storage for 4 CR123 batteries
s Side Picatinny rail allows addition of
Adjustable Cheek Piece (ACP)
s Rubber non-slip buttpad with tapered angle,
allows faster shouldering and increased
comfort with body armor
#ACAKC
#ACAKC6M
#CAKFSA
#CAKC
#CAKC6M
black
s 2 ultrasonically welded metal quick release
sling mount points
s Available for milled, stamped and
underfolding receivers
s Buffer tubes provide sealed storage area for a
cleaning kit or small items
s Higher cheekweld & longer stock length
AK47 Collapsible Stock with Aluminum Tube for Stamped Receiver
AK47 Collapsible Stock with Aluminum Tube for Milled Receiver
AK47 Collapsible Stock with Aluminum Tube for Underfolding Stock
AK47 Collapsible Stock with Polymer Tube for Stamped Receiver
AK47 Collapsible Stock with Polymer Tube for Milled Receiver
tan
od green
AKT / AKFSA
AK47 6 POSITION COLLAPSIBLE TUBE
Six position collapsible tube with storage for AK47.
s Allows installation of M4 carbine style collapsible stocks
s Internal sealed storage for cleaning kit or small items
s Available in aluminum or polymer
#AKTS
#AKTM
#AKFSA
#AKTSP
#AKTMP
6 Position Aluminum Tube for AK47 Stamped Receiver
6 Position Aluminum Tube for AK47 Milled Receiver
6 Position Aluminum Tube for AK47 Underfolding Stock
6 Position Polymer Tube for AK47 Stamped Receiver
6 Position Polymer Tube for AK47 Milled Receiver
AK47 / SA85 / GALIL
1.866.611.9576
I
Rail Systems
267.803.1517
10
X47
AK47 ALUMINUM 5 RAIL SYSTEM
The world’s first five rail system for the AK47/AK74. Five fixed MIL-STD rails provide an exceptional
design that allows numerous mission specific accessories, including bipods, vertical grips and large
optics to be mounted. No gunsmithing necessary.
s
s
s
s
s
s
s
Securely mounts to weapon effectively holding zero under the most demanding conditions
Rear rail is specifically designed for heavy optics
Three part modular system; can be used individually or in conjunction with each other
CNC machined from aviation aluminum
Reference markings assist in accessory remounting
Compatible with most AK style rifles
Rail covers included
#X47
#BMX47
#BMRX47
#BMFX47
Aluminum 5 Rail System
Lower 3 Rail Handguard
Lower 3 Rail Handguard & Top Rear Rail
Lower 3 Rail Handguard & Top Forward Rail
black
X47
BMFX47
BMRX47
BMFX47
LHV
AK47 POLYMER 4 RAIL HANDGUARD
Polymer two piece handguard provides a rigid lightweight platform to mount Picatinny accessories.
s
s
s
s
s
s
s
s
Two full length upper and lower Picatinny rails
Excellent mounting positions for optics, bipods and grips
Two side rails are ideal for mounting light / laser devices
Available as a complete handguard set (LHVSET) or separately
Constructed of high density polymer for strength and heat resistance
Compatible with most AK style rifles
Upper handguard measures 4 3/8” overall with a 4 3/4” rail
Lower handguard measures 6 3/8” overall with a 4” lower rail and two 1 1/2” side rails
#LHVSET
#LHV47T
#LHV47
black
AK47 4 Rail Handguard Set
AK47 Upper Single Rail Handguard
AK47 Lower 3 Rail Handguard
tan
od green
GRS / XGS
RS85
SA85 POLYMER 4 RAIL HANDGUARD
GALIL / GOLANI 4 RAIL SYSTEMS
Polymer two piece handguard for the SA85 provides a rigid lightweight
Picatinny platform.
Four rail Picatinny handguard for the Galil / Golani provides a rigid lightweight
accessory platform. Handguards provides excellent mounting positions.
s
s
s
s
s
Two full length upper and lower Picatinny rails
Excellent mounting positions for optics, bipods and grips
Two side rails are ideal for mounting light / laser devices
Available as a complete handguard set (RS85SET) or separately
Constructed of high density polymer for strength and heat resistance
s GRS - Polymer handguard ideal for Galil / Golani
s XGS - CNC Machined aluminum 4 rail handguard for the Sniper Galil
GRS
#RS85SET
#RS85T
#RS85L
black
SA85 4 Rail Handguard Set
SA85 Upper Single Rail Handguard
SA85 Lower 3 Rail Handguard
tan
XGS
#GRS
#XGS
od green
black
Galil / Golani Polymer 4 Rail System
Sniper Galil Aluminum 4 Rail System
11
AK47 / SA85
Magazine Accessories / Pistol Grips
www.commandarms.com
AK47MC
AK47 MAGAZINE COUPLER
Magazine coupler expands ammunition capacity and saves precious reloading time by joining two
magazines for the AK47. Will not scratch or deform magazines.
s High density reinforced polymer construction
s Screw tightened
#AK47MC
AK47 Magazine Coupler
black
UPG47
INTERCHANGEABLE PISTOL GRIP
Six piece rubberized interchangeable pistol grip easily replaces standard grip, incorporating multiple
finger groove and palm swell inserts (3 each), allowing the operator to customize their grip to fit all
hand sizes for maximum comfort and control.
s
s
s
s
s
Provides increased control during firing and reduces fatigue
Changeable finger grooves and palm swell allow for an increased powerful grip
Easily interchangeable front and rear rubberized grip inserts mount securely in place
Mottled surface minimizes risk of slippage when wet
Capped storage for small items
#UPG47
black
AK47 Interchangeable Pistol Grip
tan
od green
AG47
UPGS
M16 MAGAZINE LOADER
TARGET SHOOTING STAND
Tactical pistol grip for AK47, replaces standard grip in moments.
Provides a solid platform for hand support during sustained
target exercises. Flat surface helps stabilize and support rifle.
Use with UPG47.
s
s
s
s
Increased comfort and weapon performance
Provides more control during firing while reducing fatigue
Finger grooves and palm swell allow for a powerful grip
Mottled surface area allows for a secure grip when in use
or when wet
s Constructed of high density polymer
s UPG47 grip sold separately
#UPGS
black
#AG47
black
Tactical Pistol Grip
tan
od green
Target Shooting Stand
tan
od green
SHOTGUN
1.866.611.9576
I
Buttstocks / Rail Systems
267.803.1517
NEW TACTICAL SHOTGUN ACCESSORIES
COLLAPSIBLE STOCK WITH PISTOL GRIP AND PICATINNY SIGHT MOUNT
Stock replaces factory buttstock with a pistol grip, Picatinny sight mount and CBS six position
collapsible stock. Includes our popular CBS collapsible stock and uses the UPG pistol grip featuring
interchangeable rubberized finger grooves and palm swell.
Available for Remington 870 and Mossberg 500 / 590 12ga.
#CRGPT870
#CMGPT500
black
Tactical Shotgun Stock with Sight Rail for Remington 870 12ga.
Tactical Shotgun Stock with Sight Rail for Mossberg 500 / 590 12 ga.
tan
od green
BUFFER TUBE WITH PISTOL GRIP AND PICATINNY SIGHT MOUNT
Replace factory buttstock with a pistol grip, Picatinny sight mount and six position aluminum buffer
tube. Utilizes the UPG pistol grip featuring interchangeable rubberized finger grooves and palm
swell. Available for Remington 870 and Mossberg 500 / 590 12ga..
#RGPT870
#MGPT500
black
Buffer Tube with Pistol Grip and Picatinny Sight Mount for Remington 870 12 ga.
Buffer Tube with Pistol Grip and Picatinny Sight Mount for Mossberg 500 / 590 12 ga.
tan
od green
SHOTGUN PISTOL GRIP AND PICATINNY SIGHT MOUNT
Replace factory buttstock with a pistol grip and Picatinny sight mount. Utilizes the UPG pistol grip
featuring interchangeable rubberized finger grooves and palm swell. Available for Remington 870
and Mossberg 500 / 590 12 ga..
#RGP870
#MGP500
black
Pistol Grip and Picatinny Sight Mount for Remington 870 12 ga.
Pistol Grip and Picatinny Sight Mount for Mossberg 500 / 590 12 ga.
tan
od green
RR870 / MR500
SHOTGUN 3 RAIL FOREND
Polymer one piece forend for Remington 870 and Mossberg 500 / 590 12 ga. pump
shotgun. Provides a rigid lightweight Picatinny platform ideal for lights / lasers.
s
s
s
s
RR870
Full length lower Picatinny rail
Two side rails are ideal for mounting light / laser devices
Easy to fit and remove
Constructed of high density polymer
#RR870
#MR500
black
Shotgun 3 Rail Forend for Remington 870 12 ga.
Shotgun 3 Rail Forend for Mossberg 500 / 590 12 ga.
tan
od green
MR500
12
13
SHOTGUN
Butt Stocks / Rail Systems / Magazine Accessories
www.commandarms.com
RS870
TACTICAL SHOTGUN STOCK
Stock replaces factory buttstock on your Remington 870 12 ga. or similar shotgun. Includes our
popular CBS collapsible stock and uses a slip resistant pistol grip featuring finger grooves and palm
swell. Go from practical to tactical in minutes.
s
s
s
s
Six position collapsible stock with pistol grip
Fits Remington 870 12 ga. and similar shotguns
Ergonomic telestock lever
Two ultrasonically welded metal receptacles for push button sling swivels
#RS870
black
Tactical Shotgun Stock
tan
od green
SGR1
HGA1
PLAIN BARREL SHOTGUN RAIL
VENT RIB SHOTGUN RAIL
Aluminum 2” Picatinny rail fits plain barrel sizes up to 12 gauge, allowing
mounting of light / laser equipment.
Aluminum 1 3/4” Picatinny rail fits plain or vent rib shotgun barrels up to 12
gauge, allowing mounting of light / laser equipment.
s
s
s
s
s Secure stable fit ensures accuracy of mounted item.
s Easy to fit and remove
s CNC machined aviation grade aluminum
Secure fit ensures accuracy of mounted item
Easy to fit and remove
CNC machined aviation grade aluminum
Can also fit rifle and AR15 type barrels
#SGR1
Plain Barrel Shotgun Rail
black
#HGA1
SSM
UPR
12 GAUGE SHOTGUN SHELL HOLDER
SLING SWIVEL STUD RAIL ATTACHMENT
Replaces sling swivel stud with Picatinny rail on your rifle or shotgun.
Securely mount a light / laser or bipod.
s CNC machined aviation grade aluminum
Shotgun shell holder clamps onto any Picatinny rail allowing the operator quick
access to five extra shells, reducing reload time.
s Ideal for use with CBS collapsible stock
s Able to be belt mounted using RC1 / RC2 belt clip
s High density polymer construction
#SSM
#UPR
black
Vent Rib Shotgun Rail
black
Sling Swivel Stud Rail Attachment
black
12 Gauge Shotgun Shell Holder
MP5 / G36 / G3
1.866.611.9576
I
Rail Systems / Magazine Accessories
267.803.1517
X5
HX3
ALUMINUM 5 RAIL HANDGUARD
ALUMINUM 3 RAIL HANDGUARD
Aluminum five rail handguard for the H&K MP5. Designed and manufactured
for a secure and stable fit. No gunsmithing required.
Aluminum three rail handguard for the H&K MP5.
s Three Picatinny handguard rails surround the barrel while two mini rails
are located on either side of the front sight
s CNC machined from aviation grade aluminum
s Reference markings assist in accessory remounting
s Rail covers included
#X5
Aluminum 5 Rail Handguard for MP5
14
s Lower Picatinny rail ideal for foregrips
s Two mini side rails for light / laser attachment
s CNC machined from aviation grade aluminum
#HX3
#HX3K
#HX3SD
Aluminum 3 Rail Handguard for Standard MP5
Aluminum 3 Rail Handguard for MP5 K Model
Aluminum 3 Rail Handguard for MP5 SD Model
black
black
X1
ALUMINUM SINGLE RAIL HANDGUARD
The X1 provides a 3 1/4” Picatinny rail on an aluminum handguard with a
single rail designed specifically for the H&K MP5. No gunsmithing required.
s
s
s
s
Designed and manufactured for a 100% secure fit
Provides a stable mounting platform for Picatinny accessories
Indentation on side for mounting a pressure switch
CNC aluminum construction
#X1
Aluminum MP5 Single Rail Handguard
black
MP5TR / MP5TRL
MP5 OPTIC MOUNT
Aluminum single Picatinny rail for the H&K MP5 easily mounts on MP5
receiver providing a solid and stable mounting platform for optic equipment.
s Reference markings
s CNC machined aluminum
#MP5TR
#MP5TRL
s No gunsmithing required
3.5” Aluminum MP5 Optic Mount
5.75” Aluminum MP5 Optic Mount
black
TPR5
ALUMINUM FRONT SIGHT MOUNTED RAILS
TAC04
MP5 9MM MAGAZINE COUPLER
Aluminum front sight mounted rail securely attaches to MP5 front sight.
s Provides two 2.5” five position rails for light / laser equipment
Polymer magazine coupler for 9mm MP5 magazines. Expands ammunition
capacity and saves precious reloading time.
#TPR5
s Polymer construction, will not scratch or deform magazines
Aluminum MP5 Front Sight Rails
#TACO4
black
MP5 Magazine Coupler
black
X36C / X36K
XG3
G36 ALUMINUM 4 RAIL SYSTEM
G3 ALUMINUM 3 RAIL SYSTEM
Aluminum four rail handguard for the H&K G36. Designed and manufactured
for a secure and stable fit. No gunsmithing required.
Aluminum three rail handguard for the H&K G36. Designed and manufactured
for a secure and stable fit. No gunsmithing required.
s Four Picatinny rails surround the barrel
s Exceptional design allows numerous mission-specific accessories
s CNC machined from aviation grade aluminum
s Three Picatinny rails surround the barrel for a secure and stable fit
s Exceptional design allows numerous mission-specific accessories
s CNC machined from aviation grade aluminum
G36K
#X36C
#X36K
G36C
H&K G36 C Four Rail Handguard
H&K G36 C Four Rail Handguard
#XG3
black
black
H&K G3 Triple Rail Handguard
15
FORWARD GRIPS
Forward Vertical Grips
www.commandarms.com
FGA
FLASHLIGHT GRIP ADAPTOR
Combines 1” light mount and vertical grip into one unit and accommodates push button end cap lights.
s
s
s
s
s
s
Thumb activated on/off push button incorporates an intermittent and constant on position
Side safety switch prevents inadvertent activation of the light during covert activities
Storage compartment with a screw cap base for small cleaning kit or extra batteries
Rubber pressure switch covers allow for customized pressure switch mounting and sizing
Small Picatinny rail is included; attaches to either side or bottom of mount for the addition of a laser
1UICKLYATTACHESTORAILWITHCAPTIVETHUMBNUTSs(IGHDENSITYPOLYMERCONSTRUCTION
#FGA
Flashlight Grip Adaptor
black
tan
od green
CGRIP
AVG
COMBAT GRIP
ADVANCED VERTICAL GRIP
A strong and comfortable vertical forward grip with a screw
cap storage compartment underneath. Manufactured from
tough polymer to withstand the harshest conditions. Quickly
attaches/detaches from Picatinny rail systems with captive
thumb nut screw. Includes removable pressure switch mount.
Molded polymer grip attaches to any Picatinny rail,
providing a natural fighting stance. Ergonomic grip
features a secured storage compartment and comfortable
grip surface. Screw attachment securely locks on rail.
#AVG
#CGRIP
black
black
Advanced Vertical Grip
Combat Grip
tan
tan
od green
od green
FFG2 / FFG4
BVG
FOLDING FORWARD GRIP
BATTERY VERTICAL GRIP
Molded polymer folding grip available as a three (FFG2)
or five (FFG4) position grip. Side push button allows operator to switch between different grip positions. Features
a capped storage compartment for two AA batteries.
Quick detach, molded polymer grip attaches to any
Picatinny rail utilizing a twist tightening design. Waterproof
battery storage for 3 CR123 batteries.
#FFG2
#FFG4
black
Three Position Folding Grip
Five Position Folding Grip
tan
#BVG
black
Battery Vertical Grip
tan
od green
od green
OFEK1
IFG
FOREARM GRIP & LIGHT MOUNT
INTERCHANGEABLE FORWARD GRIP
Specially designed forearm grip for steady
and fast shooting. Securely holds any
1”-1.08” light and incorporates a built-in
cavity for remote switch wiring. Smooth
flat bottom for use on supporting surfaces.
Provides a customizable forward grip. Thumbnut allows
quick attachment to Picatinny rail. Six interchangeable
rubberized finger grooves and backstraps as UPG pistol
grip. Fully customizable for comfort and control. Capped
storage for small items. Aluminum rail adaptor.
#IFG
Interchangeable Forward Grip
black
tan
#OFEK1
black
Forearm Grip and Light Mount
tan
od green
od green
VG1
SVG
QUICK DETACH VERTICAL GRIP
SHORT VERTICAL GRIP
Molded polymer short vertical grip incorporates a secured
storage compartment. Comfortable grip surface has control
rings for a non-slip grip. Screw tightened.
Quick detach combat grip attaches and detaches with
the push of a button. Simply push and slide along rail
to desired location. Incorporates a secured storage
compartment for batteries or small items.
#SVG
#VG1
black
Short Vertical Grip
tan
od green
black
Quick Detach Vertical Grip
tan
od green
LIGHT / LASER MOUNTS
1.866.611.9576
I
Light & Laser Mounts / Lasers
267.803.1517
BK1 / BK2
FAS2 / FAS3 / FASML
LASER / LIGHT MOUNT
QUICK DETACH LIGHT MOUNT
Polymer laser / light mount quickly attaches and detaches
to Picatinny accessory rail utilizing side push buttons.
Allows operator ready access to illumination source.
Quickly attaches / detaches to Picatinny rail utilizing a one
finger push button. Polymer light mount allows operator
ready access to illumination source.
#BK1
#BK2
#FAS2
#FAS3
#FASML
black
3/4” Dia. Light or Laser
1” Dia. Light or Laser
tan
16
1” Dia. Lights
15/16” Dia. Lights
AA Mini Mag Light
od green
black
tan
od green
UFH
5 POSITION LASER / LIGHT MOUNT
Light and laser mount quickly locks in any of five positions allowing mounting on either side of the
rifle or pistol. Change the position of the light by simply pushing/pulling the mount and rotate.
s Enables light to enter the room while the operator maximizes the use of cover,
regardless of which side room entry is desired
s Locks in position at 0˚ 45˚ 90˚ 135˚ 180˚
s Operator can easily access on/off button with thumb while using a vertical grip
s Available in two versions: Screw Tightened or Push Button Quick Release
s Push button model includes 2 push buttons for both Picatinny and under barrel rails
s Molded reinforced polymer composite
SCREW TIGHTENED
#UFH1
#UFH2
#UFH3
#UFH4
black
SCREW TIGHTENED
PUSH BUTTON QUICK RELEASE
0.71” - 0.81” Dia.
0.84” - 0.94” Dia.
0.96” - 1.06” Dia.
1.11” - 1.20” Dia.
tan
#UFH1P
#UFH2P
#UFH3P
#UFH4P
0.71” - 0.81” Dia.
0.84” - 0.94” Dia.
0.96” - 1.06” Dia.
1.11” - 1.20” Dia.
od green
TGK1
TGK2
FRONT SIGHT LIGHT MOUNT KIT
FRONT SIGHT LASER MOUNT KIT
Front sight Picatinny 1” light mount kit. Includes TPR15X
front sight mount, BK2 light mount, Surefire G2 and
batteries.
Front sight Picatinny laser mount kit. Includes X3 front
sight mount with forward barrel rail, Red Dot laser, BK1
laser mount and batteries.
#TGK1
#TGK2
Front Sight Light Mount Kit
TGL
TLL
TACTICAL RED LASER AND LIGHT
Compact weapons light with integrated aiming laser.
s Central rotary mode switch with four positions:
off, light, light and laser, laser
s Slide locks for instant mounting
s 150 lumens flashlight
s Six hour runtime
s Class IIIA laser, <5mw laser power output,
650nm laser wavelength
s Powered by a two CR123 batteries
s 3.1 inches long weighing 0.21lbs
Tactical Red Laser and Light
black
Front Sight Laser Mount Kit
black
black
#TLL
PUSH BUTTON QUICK RELEASE
TACTICAL GREEN LASER
Green laser sight features a 532nm laser module to provide a brilliant green
laser beam. Each laser sight is easily adjusted for zero with both a windage
and elevation screw. The laser sight comes with a click on/off pushbutton
switch, and a pressure pad remote switch.
s
s
s
s
s
Class IIIA laser, <5mw laser power output, 532 laser wavelength
Laser Dot Size: 12mm/10m
Powered by one CR123 battery
Length: 4.45”, weight: 0.3 lbs
1” diameter
#TGL
black
Tactical Green Laser
17
LIGHT / LASER MOUNTS
Light / Laser Accessories
www.commandarms.com
LAS
PS8G2 / PS5G2 / PS15G2
CAA RED DOT LASER SIGHT
G2 PRESSURE SWITCHES
CAA Super Bright Laser Sight contains a
650 nm-laser diode with a 500-yd range.
Uses optional BK1 3/4” laser mount.
Pressure switches for Surefire G2 and similar. Easily attach
to vertical grip or handguard with Velcro. Available in
multiple lengths and styles to fit operators needs.
#LAS
#PS5G2
#PS8G2
#PS15G2
Red Dot Laser Sight
5” for Surefire G2 (2nd Gen. switch in cap)
8” for Surefire G2 (2nd Gen. switch in cap)
15” for Surefire G2 (2nd Gen. switch in cap)
G2LED
SUREFIRE G2 LED REPLACEMENT BULB
LED lamp replaces the standard P60 lamp in Surefire G2.
Brighter than Surefire replacement LED.
#G2LED
LED for Surefire G2 Flashlight
Parameter
Output
Runtime
Life span (MTBF)
IR filter capable
Visible colors
filter capable
Surefire P-60
65 lumens
1 hour
30 hours
yes
yes
Surefire LED
80 lumens
12 hours
no
yes
CAA LED
120 lumens
8 hours
20,000 hours
no
yes
BIPODS / EQUIPMENT MOUNTS
Light / Laser Accessories
BP1
BP0 / BPOS
UNIVERSAL EQUIPMENT MOUNT
BIPOD WITH PICATINNY RAIL
Equipment mount allows the operator to rapidly
employ a bipod that has been previously attached.
Quick detach push button allows for easy and fast
attachment and removal. Mount on side of a Picatinny rail for use as a side sling adaptor. Constructed
from high density polymer, Sling adaptor constructed from steel.
Versatile bipod, mounts onto a Picatinny rail in seconds. Legs can be attached/
detached with two swift movements. The 3” Picattiny Rail allows the addition of
a foregrip without taking up more space on the handguard. New recessed design
allows legs to be mounted higher, giving a lower and more stable center of
gravity. Comfortable rubber covers legs allowing a non-slip grip.
s
s
s
s
s
Quick release push button leg extension
Legs manufactured from stainless steel
No External Springs
Strong lightweight design
Redesigned feet provide increased stability
#BPO
#BPOS
black
#BP1
Universal Equipment Mount
Bipod 8” - 12” with Picatinny Rail
Bipod 6” - 8” with Picatinny Rail
black
SNIPOD
BSR / BSRS
SNIPER RIFLE STABILIZATION SYSTEM
SIDE RAIL MOUNT BIPOD
s “Dampened” fluid friction 360˚ pan / ±50˚ tilt head with horizontal & vertical
locks and quick disconnect rifle mount
s Rifle Interface Mount; 1913 Picatinny rail grabber (other sniper rifle mounts
available)
s Tripod not included
Configuration allows bipod legs to be
mounted on the side rails, freeing up
the lower rail for lights and grips, and
lowering the center of gravity resulting
in a more stable platform.
s
s
s
s
Quick pod length adjustment
Manufactured from stainless steel
Lightweight and strong design
No External Springs
#BSR
#BSR
black
Side Rail Mounted Bipod 8” - 12”
Side Rail Mounted Bipod 6” - 8”
#SNIPOD
black
Sniper Rifle Stabilization System
TACTICAL GEAR
1.866.611.9576
I
Slings / Sling Mounts / Tactical Vest
267.803.1517
18
OPS / OPS1
TPS
ONE POINT SLING
THREE POINT SLING
Ideal for tight quarters combat, allowing easy movement when operating inside
tight spaces. Maintains its structure for easy donning. OPS1 has upgraded tubular
webbing with fully enclosed bungee portion, allowing for increased durability.
Proven three point design for carbine style M16/AR15. Sling wraps around
handguard, Velcro secured, and attaches to collapsible stock.
s
s
s
s
s
s
Strong metal carabineer for easy attachment
Sling easily snaps onto many mounting locations
Fully adjustable sling fits all body sizes
Quick release side buckle
Constructed from 1.5” nylon web
High density bungi cord and carabineer are colored black
s Quick release buckle detaches sling from operator instantly,
and also allows for easy donning with body armor
s Fully adjustable and totally ambidextrous
s Constructed from ballistic 1.5” nylon
OPS
#TPS
black
OPS1
#OPS
#OPS1
black
One Point Sling (66” overall length)
One Point Sling XL (76” overall length)
tan
od green
OPSM
ONE POINT SLING MOUNT
One point sling mount for single mounting
point snap clips or conventional sling up to
1.25” webbing. No tube disassembly; simply
remove collapsible buttstock, slide over
tube, position properly and secure. Easy
and fast installation. CNC machined from
aluminum with matte black finish.
#OPSM
One Point Sling Mount
black
tan
od green
6003
QUICK ADJUST TACTICAL SLING
Quick adjustment sling with reinforced
polymer hooks for silent movement. Small integral pouch on sling
for storage. Side release buckle for
quick conversion from patrol mode to
engagement mode. Constructed from
ballistic 2” nylon.
#6003
black
Quick Adjust Tactical Sling
tan
od green
TV7711
COMBATANT VEST
OPSMP
PUSH BUTTON SLING SWIVEL SLING MOUNT
Accommodates one point slings using a push
button sling swivel. No tube disassembly;
simply remove collapsible buttstock, slide
over tube, position properly and secure. Easy
and fast installation. CNC machined from
aluminum with matte black finish.
#OPSMP
Three Point Sling
Push Button Sling Mount
black
Combatant Vest is constructed from MIL-SPEC Cordura and designed to easily
carry heavy loads and a hydration system, enabling fast and easy access to vest
contents. Battle tested and under official use by the IDF (Israel Defense Forces).
s
s
s
s
s
s
s
s
4 triple AR15 mag pouches, 8 standard single pistol mag pouches
5 additional pouches for compass, grenades, etc
Hydration system carrier with straps (hydration system not included)
1 large sized back carry pouch with one internal pouch for a radio
system (8.5” x 9.5” x 4.5”)
Full length Velcro front closure plus 3 side release straps
1 helmet holder
1 rope/parachute flare pouch on back,
Fully Padded (removable), lightweight at 4.21 lbs
PBSS
PUSH BUTTON SLING SWIVEL
Push button design for quick detachment. 1.625”
rugged all blued steel sling swivel. Sturdy 0.2”
thick steel ring. Easily attaches to our SRS/ARS,
CBS and similar stocks.
#PBSS
black
Push Button Sling Swivel
#TV7711
black
Combatant Vest
tan
od green
19
TACTICAL GEAR
Gloves / Knives / Covert Pack Holsters / Accessories
www.commandarms.com
BRG / BLG
L91011
STRYKER ASSAULT GLOVES
LINTON HUNTING / TACTICAL KNIFE
Superior hand protection for thermal, cut, impact and
abrasion resistance. Lightweight Kevlar top, sleeve and
inner lining for thermal cut and abrasion protection.
Leather covered, injection-molded hard knuckle protector
for impact and abrasion resistance. Palm, fingertips and
cuff have a dual leather layer for increased strength.
Nylon loop on wrist allows easy donning and attachment
to gear. Trigger finger can be folded back to expose finger.
Available in large or extra large
7” fixed blade hunting / tactical knife with 12.5” overall length,
suitable for various outdoor activities. Blade is silver titanium
coated and manufactured from high quality carbon steel.
Para Cord wound handle provides a better grip.
Nylon belt sheath with leg tie and small storage
pouch with snap clip.
#BRG
#BLG
L9007
black
Brown Tactical Glove
Brown Tactical Glove
LINTON SEAL / TACTICAL KNIFE
9.5” fixed blade seal / tactical knife with 14.5” overall length,
suitable for demanding activities. Black titanium coated
blade manufactured from high quality carbon steel. Para
Cord wound handle provides a better grip. Nylon belt
sheath with leg tie and small storage pouch
with snap clip.
9” Blade Linton Seal Knife
5009
COVERT SHOULDER BAG HOLSTER
Covert shoulder bag is a 9” x 7.25” concealment holster
bag that hangs casually from the shoulder. Constructed
of 500 denier Cordura
s Securely holds handgun and two magazines in a
heavy duty 3” neoprene strap
s Quick pull-tab for fast access to handgun
s Velcro front flap reveals zippered storage
compartments for small items and cell phone
s Lockable zipper on handgun compartment
s 1.5” detachable carry strap adjusts to 56”
#5009
black
Covert Shoulder Bag Holster
black/blue
5006
COVERT WAIST PACK HOLSTER
Great for jogging or traveling. Features a detachable sturdy polyethylene
backplate with a neoprene slot to securely hold your handgun.
s
s
s
s
s
s
Ambidextrous quick pull-tab for fast handgun access
Three zippered front pockets hold accompanying items
Constructed of 500 denier Cordura
Measures 7” x 11”, Weather-proof cover
Fits up to 4” revolvers and medium/large semi-autos
Adjustable 2” nylon strap with side buckle release fits
waists up to 49”
#5006
black
7” Blade Linton Tactical Knife
LINTON MACHETE
brown
L9008
#L9008
#L91011
Covert Waist Pack Holster
black/blue
12.75” fixed blade machete with 18” overall length, suitable
for various outdoor activities. Black titanium coated blade
manufactured from high quality carbon steel. Para Cord
wound handle provides a better grip. Nylon belt
sheath with snap closures and leg cord.
#L9007
12.75” Blade Linton Machete
5012
COVERT II WAIST PACK HOLSTER
Ideal for storing more than your firearm, the Covert II measures 8” x 11.5”. Easy
access to contents without exposing your handgun. Handgun is hidden behind the
main compartment in a concealed pocket. Constructed of 500 denier Cordura.
s Ambidextrous tabs allows instant access to handgun
s Velcro front flap has storage for two magazines and
one tactical knife pouch
s Center compartment for ID, Passport, cell phone, etc.
s Fits full size revolvers / large semi-autos
s Ambidextrous Velcro holster with 3” neoprene strap
s Side release buckle fits up to 54” waists
#5009
black
Covert II Waist Pack Holster
black/blue
PCC
PISTOL CARRY CORD LANYARD
Lanyard easily attaches to belt with loop, and attaches to
handgun with snap hook. Coiled flexible design is less
likely to snag on objects. Can be used to secure flashlights,
cameras, compasses, etc.
#PCC
Pistol Carry Cord Lanyard
black
RC1 / RC2
ROTATING PICATINNY RAIL BELT CLIP
Holds any Picatinny rail accessory on your belt. 360˚ 17
position Picatinny rail. Recommended for use with CAA
light mounts or MPS mag holder.
#RC1
#RC2
2” Picatinny Belt Clip
2.25” Picatinny Belt Clip
ACCESSORIES
1.866.611.9576
I
Scop Mounts / Rail Accessories / Glock Accessories
267.803.1517
20
CSR1 / CSR3
HANDGUN RAILS
FALC
ALUMINUM PICATINNY SCOPE RINGS
ALUMINUM TACTICAL SCOPE RINGS
FAL POLYMER CHEEK PIECE
CSR1 features three mini rails on top and sides of ring for
adding light / laser. Can also be used as a 1” light mount.
CSR3 has see thru opening to enable use of iron sights.
Handgun rail quickly adds a Picatinny rail to the under
barrel of a handgun. Easily clamps onto the trigger guard
area providing a stable platform for mounting a light / laser.
CNC machined from aviation grade aluminum.
Cheek piece for FAL provides comfortable cheek weld. Allows quicker target acquisition and easier sight alignment.
Easily tightens onto tubular stock with Allen head screws.
Does not include Tubular Stock.
#1911A1
#BERA1
#GLKA1
#SIGA1
#FALC
CSR1
#CSR1
#CSR3
CSR3
1” - 1.18” Picatinny Scope Rings (set of 2)
30mm Picatinny Scope Rings (set of 2)
TA1 / TA3
Colt 1911 Styles
Beretta 92F
Glock 17, 19, 26
Sig Sauer 226, 228, 229
G3SA
G3 STOCK ADAPTOR
ALUMINUM TACTICAL SCOPE RINGS
Set of 1” Aluminum Tactical Scope Rings weighing in at
only 4.3 ounces. Rings provide a rugged mounting platform for your scope. CNC machined from aluminum.
#TA1
#TA3
1” Aluminum Tactical Scope Ring (set of 2)
30mm Aluminum Tactical Scope Ring (set of 2)
FAL Polymer Cheek Piece
GLA40 / GLA37
H&K G3 stock adaptor easily installs and accepts CBS collapsible stock and similar AR15 collapsible stocks.
LAUNCHER 3 RAIL ADAPTOR
Designed for the M203 40mm tubes and Less Lethal 37mm
tubes launchers. CNC machined aluminum.
s
s
s
s
Compliant with MIL-STD 1913 Picatinny rail
Adaptor allows mounting of light / laser, forward
vertical grip, bipod and more
Easy to fit / remove and secured by Allen bolts
#G3SA
H&K G3 Collapsible Stock Adaptor
NFS
DVSR
GLOCK MAGAZINE COUPLER
DUAL VARIABLE SCOPE RINGS
Scope ring set with integral base for Picatinny rail. Fit
scopes with 1” - 1.18” diameter. Center height measures
1.82”. Aluminum mount can be installed / removed in
seconds.
GLA40
#GLA40
#GLA37
GLA37
M203 Launcher (40mm tube)
Less Lethal Launcher (37mm tube)
TPR16
Glock magazine base with Picatinny mounts. Able to
switch from a rubber magazine base guard to a 90˚ Picatinny mount or to a two sided Picatinny mount. NFS mount
allows the addition of a second magazine. Fits all Glock
9mm & .40 cal. Kit Includes: coupler, Picatinny rail, 2 mag
extensions and 2 extension covers. Available with black or
orange bumper.
P90 FRONT SIGHT RAILS
#DVSR
Aluminum Tactical Scope Ring
Aluminum front sight mounted rail securely attaches to FN
P90 front sight. Provides two rails for laser and light equipment to be mounted. GUNSMITHING REQUIRED.
TMUZA1 / TUZA1
UZI BAYONET LUG MOUNTED RAIL
Transforms Micro Uzi (TMUZA1) or Uzi / Mini Uzi (TUZA1)
bayonet lug into a Picatinny rail mount, allowing the addition of light and laser mounts. Easy to fit and remove,
secured by Allen head screw. CNC machined from aviation
grade aluminum.
#NFS
#TPR16
GIS
TPR17
TMUZA1
Glock Magazine Kit
Aluminum P90 Front Sight Rails
MICRO GALIL FRONT SIGHT RAILS
Aluminum front sight mounted rail securely attaches to
Micro Galil front sight. Provides two rails for laser and light
equipment to be mounted.
GLOCK SCOPE MOUNT
Designed for most Glock pistols with front accessory rail
regardless of size or caliber. Allows use of iron sights. Easy
installation replaces trigger pin and locks to rail.
TUZA1
#GIS
#TMUZA1
#TUZA1
Micro Uzi Bayonet Lug Mount
Uzi / Mini Uzi Bayonet Lug Mount
#TPR17
Aluminum Micro Galil Front Sight Rails
Glock Scope Mount
21
ACCESSORIES
Rail Covers / Cleaning Kits / New Products
www.commandarms.com
RCM
SAFE-T-STIX
LTP
MOTOROLA RADIO CARRIER
9mm, .40, .45, .223 BARREL PLUGS
U.S. ARSENAL CLEANING PATCHES
Polymer radio carrier fits Motorola
two way radio models 50/60, Talkabout 250, 6300 and similar. Rides
securely on belt. Fits belts up to 1
3/4”.
Solution to safe training practice, instruction, display and
gun storage. Securely blocks barrel and prevents live round
from being chambered. Bright and visible colors. Sizes fit
Pistols 9mm, .40 cal, .45 cal, and .223mm rifle barrels.
2” diameter, 100% cotton
weave are super tough and
highly absorbent. No lint.
#RCM
Motorola Radio Carrier
LRC
# Sold in Bulk or Packs of 10 - Call for Details
#LTP500
#LTP1000
#LTPBULK
LADDER STYLE RAIL COVER
Ladder style low profile rail cover
for Picatinny rail. Provides
increased comfort on handguard.
Measures 8” long. Set of 4.
#TA1
Ladder Style Rail Cover
black
tan
od green
PCL / PCK / PCS
PICATINNY RAIL COVERS
Strong thermo plastic composite provides a durable rail
cover to fit on Picatinny handguard rails. Covers allow
pressure switch cables to fit underneath.
#PCL
#PCS
#PCK
black
Long Rail Cover 5.75”
Short Rail Cover 1.75”
Carbine Kit - 6 Short & 2 Long
tan
500 Patches (approx) bag
1000 Patches (approx) bag
22,400 Patches (approx) box
BCK
ACK
OTIS 5.56 BASIC CLEANING KIT
OTIS 5.56 ADVANCED CLEANING KIT
Basic 5.56 cleaning supplies. Available as an individual kit
or with UPG16C and G27C. Kit includes:
Basic 5.56 cleaning supplies. Available as an individual kit
or with UPG16C and G27C. Kit includes:
s 10 patches
s 22 cal. tip
s 5.56 brush
s 26” rod
s T handle
s Obstruction remover
s NATO adaptor
#RCM
Motorola Radio Carrier
s 5.56 cleaning gear
s Soft pack case
s Optics cleaning gear
#RCM
Motorola Radio Carrier
NEW PRODUCTS COMING SOON
SKS BODY
AL1/ AL34 / AL134
ALUMINUM TACTICAL SCOPE RINGS
ALUMINUM LIGHT / LASER MOUNT
New lightweight high strength polymer replacement SKS
stock system features forward upper and lower rails for the
mounting of accessories. Pistol grip with six rubberized interchangeable inserts for custom sizing and CBS buttsock
has been added. Just drop in your barreled action and you
are ready to go.
Mount offers long distance precision and accuracy. CNC
manufactured from Aviation Grade aluminum. Securely
tightens to Picatinny Rail with 2 screws.
od green
M33RC / M44RC
#AL1
Aluminum 1” Light Mount
#AL34
Aluminum 3/4” Laser Mount
M33 / M44 RAIL COVERS
Thermal rail cover provides a comfortable gripping surface
for M33 / M44 rail systems. Rail covers attach to entire
length of rail.
#SKS
FAL Polymer Cheek Piece
MGRIP
CONTOURED MAGAZINE GRIP
M33RC
#M33RC
#CM33CR
#CM44RCL
#CM44RCLV
#CM44RCS
#CM44RCSV
#M44RCS
#M44RCL
M44RC
Set of 2 M33 Rail Covers
Single M33 Rail Cover
Single M44L Rail Cover
Single M44L Vented Rail Cover
Single M44S Rail Cover
Single M44S Vented Rail Cover
Set of 4 M44S Rail Covers
Set of 4 M44L Rail Covers
Mag Grip increases your comfort while maintaining control. Clamps onto the Picatinny Rail. Will be available in 2
models; contoured or with finger grooves.
#MGRIP
black
tan
od green
black
#AL134
Magazine Grip
tan
od green
Aluminum 1” Light & 3/4” Laser Mount