CHIP AND FLUID TREATMENT PLANTS SWARF CONVEYING LINES
Transcription
CHIP AND FLUID TREATMENT PLANTS SWARF CONVEYING LINES
CHIP AND FLUID TREATMENT PLANTS SWARF CONVEYING LINES 1 Centrifuges Automatic centrifuges for chips “MINISYSTEM” Vibrating screen to remove solids, barend, etc Hopper/Conveyor feed to centrifuge Automatic centrifuge • capacity 120-150 Kg/h Metal skid base Strengths: • Competitive price • Minimal footprint area • Separation solids and pieces/chips • Residual humidity < 2 % • Low energy consumption • No installation costs/ plug and play Minisystem with crusher 2 Minisystem with 2 shaft shredder Minisystem with crusher, fed by a turner/skiphoist Horizontal swarf centrifuges CONVEYORS Strengths: • The centrifuge with horizontal basket that overturns the technique of centrifuging • Excellent results at lower cost • Ideal for continuos processing and higher capacity centrifuge operation diagram model * capacity kg/h SCE20 500 overall dimension 1300x1000 (mm) SCE30 1500 SCE40 4000 1700x1200 1800x1200 * capacity for steel chips Automatic chip spinning Automatic chip spinning plant with buried conveying line Chip processing plant with crusher and centrifuge 3 Horizontal swarf centrifuges Plant with manual feeding Small vibrating screen to detect and remove pieces among chips Automatic centrifuge • capacity per hour 500/1500/3000 kg Chip spinning plant - max capacity: 3000 kg/h 4 Chip crushing and spinning plant Crushers CONVEYORS Model SCR10 SCR20 SCR25 SCR40 7,5 15 22 37 * Capacity kg/h 500 1000 2000 5000 Voltage V 400 400 400 400 Weight Kg 980 1600 1960 3000 Surface in 600x900 750x1500 1200x2000 2700x2200 Power Kw Crushers plan m/m * (for steel) Drag conveyor for sludge Vibrating screen to remove pieces among chips Crusher Automatic centrifuge Conveyor for feeding the centrifuge Metal skid base Automatic plant for chip crushing and spinning 5 Crushers Chip crushing and spinning installations, prior to melting in furnaces • Capacity: 3 ton/h 6 Chip processing plant including crusher and centrifuge Chip crushing plant with magnetic separator Crushers CONVEYORS Chip crushing and spinning plant, fed by a turner/skiphoist Chip crushing installation Aluminium chip crushing plant. Chip conveyed by a scraper conveyor. Crusher model SCR40 max capacity 5000 kg/h Chip processing plant made of a crusher and a centrifuge Crusher fed by a turner/skiphoist Crusher model SCR20 7 Complete installations Silos for storing steel and brass chips • Project • Design • Production • Service 8 Lateral discharge Discharge at the front Complete installations CONVEYORS Modular silos • Large volumes in a reduced space • Security against theft • Low environmental impact • Hygienic and clean • Ability to add new modules in the future • Easy to position • Strong earthquake - resistant structures Detail of the chip discharge doors 9 Complete installations Detail of the area of the refrigerant recovery, coming from chips separation process Brass, steel and aluminium chip processing plants Chip spinning system 10 Chip crushing and spinning process Installations for chip crushing, spinning and storing Complete installations CONVEYORS Automatic lines for chip treatment Applications: • Mechanical industries • Taps and fittings industries • Metal connector industries • Aeronautics • Automotive plant for chip spinning and storing 11 Conveyors lines Below ground lines for chip conveying Detail of below ground lines 12 Conveyors lines CONVEYORS Aluminium chip conveying line Detail of a swivel chute Conveying lines for long and tangled swarf Conveyors for tangled swarf Storing of aluminium chips 13 Filtratión Drag conveyor equipped with rotary drum and self-cleaning filter. Filtration rate: 30 microns Filtration system Centrifuge for oil filtration. Filtration rate: 5 microns 14 drag tank - Capacity: 8000 lt/min Filtration rate: 30 microns Chip conveyors CONVEYORS conveyors for chip conveying • Steel • Aluminium • Brass • Cast iron MAGNETIC CONVEYORS • Belt with permanent magnets • Ideal for small metallic swarf conveying 15 Chip conveyors WE REALISE CONVEYING LINES: • drag conveyors • hinged belt conveyors • magnetic conveyors • combined conveyors 16 Heavy conveyors CONVEYORS Swarf conveying line, under a press Metallic swarf transport • Hinged belt conveyor • Up to 2 metres wide • Up to 100 metres long • Pitch belt of 4,6 or 8 inches Below ground conveyor lines for metallic swarf coming from presses 17 Heavy conveyors Heavy conveyor for scrap discharge AUTOMATIC LINES FOR SWARF CONVEYING Heavy conveyors for the conveying of: • Metallic swarf, chips and cutting oils • Hot and heavy pieces • Die casting industry Below ground lines for conveying of swarf 18 Detail of discharge into a container Heavy conveyors CONVEYORS Final conveyor of a swarf conveying line Swarf conveying line Conveyor placed under a press 19 WWW.INDASS.IT INDUSTRI ASSOCIATE CONVEYORS Chip and lubricant treatment plant Swarf conveying lines Via Giorgio La Pira, 12 - 25021 Bagnolo Mella (Bs) Italy Tel. 0039 030.6829811 - Fax 0039 030.6829888 [email protected] - www.indass.it Sistemi per trattamento trucioli MATERIAL HANDLING Transpallet Carrelli elevatori