electric glycol pump
Transcription
electric glycol pump
ELECTRIC GLYCOL PUMP THE NEW HEART OF GLYCOL DEHYDRATION ELECTRIC GLYCOL PUMPS HOW IT WORKS CORE FEATURES pressure capability of a positive displacement pump with the durability • Low Operating Cost of a diaphragm pump. The Kimray pump uses high pressure plungers • Minimal Maintenance to energize the back side of a diaphragm. This creates a hydraulically • Compact Design balanced diaphragm, resulting in the diaphragm moving forward to • Low or High Pressure Kimrays unique hybrid designed electric pump, combines the high • Zero Emissions displace the fluid in the pump head and generate flow. The diaphragm separates the dirty process fluid from the oil required for the positive displacement pump. The pump uses 3 pistons that are 120 degrees apart to generate pulsation free flow. CONTACT INFORMATION Contact your sales representative for instructions on how to convert your site to use the Electric Glycol Pump, and visit www.kimray.com for 02 more information. For more information please visit www.kimray.com BENEFITS Industrial construction for a long Compact and efficient design can be fitted with service life in harsh conditions a smaller motor than similar capacity pumps No cups, packings, or seals result in minimal maintenance. EV50015 SHOWN Offers the high pressure capabilities of a piston Seal-less design can pump pump with the durability of a diaphragm pump. particles in suspension CODE BUILDER Base Code Body Material Elastomer Power Req. Electrical Req. Accessories GEA EV50015 Ductile Iron Viton 3HP 1 FS GEB EV12012 316 Viton 2HP 1 NA 1. Material: Code S6 3. Power Requirements GEA: 4. Electrical Requirements: Description Code Description Code Description 316 Stainless Steel 3HP 3 Horsepower 1 110/220VAC 1-Phase 5HP 5 Horsepower 3 220/480VAC 3-Phase 7HP 7.5 Horsepower 10HP 10 Horsepower 2. Elastomers: 5. Accessories: Code Description - FKM - Viton Code Description Aflas FS Hi/Lo Float Switch AF 3. Power Requirements GEB: Code Description 1HP 1 Horsepower 2HP 2 Horsepower 3HP 3 Horsepower ELECTRIC GLYCOL PUMP EV50015 GLYCOL PUMP SPECIFICATIONS Capacity at Max. Pressure 1500 psi (103 bar) Max Outlet Pressure 8.3 gpm 31.4 /min RPM 1200 max. - 200 min. Inlet 250 PSI max. Connections Inlet: 1” NPT Outlet: 3/4” NPT Temperature Max: 250° F (121.1°C) Min: 40° F (4.4°C) Fluid End Material, Manifold SA395 / SA479 Elastomers Aflas® or Viton® Weight (dry) 100 lbs. (45.7 kg) Horsepower Calculations gpm x psi = electric motor HP* 1,460 lpm x bar = electric motor kW* 511 *HP/kW is required application power. 04 For more information please visit www.kimray.com ELECTRIC GLYCOL PUMP EV50015 DIMENSIONS & TECHNICAL INFO GLYCOL PUMPS ELECTRIC PUMPS STEEL 13.6 345.8 2.3 57.8 GLYCOL PUMPS 4.4 111.1 ELECTRIC PUMPS STEEL .2 6.3 13.6 345.8 2.3 57.8 4.4 111.1 9.8 247.7 Ø 1.0 25.4 .2 6.3 4X .358 MOUNTING HOLES 9.8 247.7 Ø 1.0 25.4 4.9 123.8 4X .358 MOUNTING HOLES 9.8 247.7 3/4" NPT OUTLET (BOTH SIDES) 4.9 123.8 2.3 58.4 9.8 247.7 3/4" NPT OUTLET (BOTH SIDES) 2.3 58.4 6.2 158.7 5.2 133.3 6.2 158.7 9.4 238.1 5.0 127.0 5.0 127.0 3.8 95.5 10.9 276.5 9.4 238.1 18.7 18.7 475.1 Current Revision: Current Revision: 1" NPT INLET (BOTH SIDES) 1" NPT INLET (BOTH SIDES) .8 20.1 3.8 10.9 276.5 475.1 5.2 133.3 www.kimray.com www.kimray.com 95.5 .8 20.1 Bulletin G10253 Issued 11/11 Bulletin G10253 Issued 11/11 ELECTRIC GLYCOL PUMP EV 12012 GLYCOL PUMP SPECIFICATIONS Capacity at Max. Pressure 2 gpm, 7.8 /min Max Outlet Pressure 1200 psi RPM 1800 Max Inlet Pressure 250 psi Connections Inlet: 1/2” NPT Outlet: 3/8” NPT Temperature Max: 250° F (121.1°C) Min: 40° F (4.4°C) Elastomers Viton® or Aflas® Weight (dry) 37 lbs. (16.8 kg) Horsepower Calculations 6 x rpm gpm x psi + 63,000 1,460 = electric motor HP* 6 x rpm 84,428 = electric motor kW* + lpm x bar 511 *rpm equals pump shaft rpm. HP/kW is required application power. Use caution when sizing motors with variable speed drives. 10 For more information please visit www.kimray.com ELECTRIC GLYCOL PUMP EV 12012 DIMENSIONS & TECHNICAL INFO Net Positive Suction Head (NPSHr) 3.5 Performance 11 10 2.0 6 5 1.5 4 1.0 3 2 0.5 1 10 500 psi (100 bar) 1200 psi (170 bar) 2.33 8.75 2.0 7.5 1.66 6.25 1.33 5.0 1.0 3.75 .66 2.5 .33 1.25 1750 0 200 400 600 800 10001200140016001800 RPM 10.38 (263.7) 100 psi (35 bar) 2.66 Gallons per Minute 7 NPSHr (meters of water) 2.5 8 NPSHr (feet of water) 11.25 3.0 9 0 12.5 3.33 3.0 0 0 200 400 600 800 1000 1200 1400 1600 1800 RPM 9.93 (252.2) 7.01 (178) Outlet D-04: 1/2" NPT G-04: 1/2" BSPT 8.71 (221.2) 0.189 (4.8) 2.25 (57.2) 1.73 (43.9) Good Key 4.97 (126) 0.875 (22.23) 4.250 (107.9) 4.25 (108) Inlet D-04: 1/2" NPT G-04: 1/2" BSPT 0.75 (19.1) 2.25 (57.2) 2.75 (69.9) 2.75 (69.9) 3.35 (85.1) 0.75 (19.1) 1.71 (43.4) 5.00 (127) 6.55 (166) 3.52 (89.4) Liters per Minute 12 WHO WE ARE We design and manufacture Oil and Gas control products. Based on 65 years of pioneering product development, we provide products and services that work better, smarter and are more inventive. We generate meaningful solutions that solve problems, we do this by staying curious and engaged in customer’s needs — to develop products that perform. Our product ideas are fueled by deep desire to make a difference that is both personal and unique to the customer. We have made it our life’s work, to provide products and services that positively impact. Through the years this pursuit has built strong relationships, our customers have known that when buying from Kimray, it’s about much more than the product. The relationships between Kimray representatives and our customers extend from before the sale through the life of the product. That relationship and Kimray products are the result of a company striving for excellence to positively impact our customers, our company and our community. Visit www.kimray.com to learn more about Kimray and the products we create. www.kimray.com MKSL-0111 Electric Glycol Pumps © Kimray, Inc 2014 © 2014 Kimray, Inc. SSEG-001 Electric Glycol Pump