TOYO OTR PRODUCT GUIDE

OFF-THE-ROAD Tires
FOUNTAIN CORP
OFF-THE-ROAD TIRES
Radial and bias tires to suit machines operating in
mining, earthmoving, construction and industrial applications.
http://www.fountaintire.com
Earthmover Radial Tires
Please contact Fountain Corp. for further information about sizes and specifications.
Rear Dump Truck - Coal Hauler - ADT - Scraper
T-431 (E-4)
Deep tread rock lug pattern with
shoulder protection for heavy trucks.
18.00R33
30.00R51
33.00R51
36.00R51
T/L
T/L
T/L
T/L
T-451 (E-4)
For small dump trucks requiring extra
traction in soft soil and rough terrain.
21.00R35
T/L
T-331 (E-3)
Extra traction and stability with stone
ejecting tread centre for ADT's.
17.5R25
20.5R25
23.5R35
T-432 (E-4)
Deep tread traction for 80 - 100 tonne
payload trucks in hot applications.
27.00R49
T/L
T-452 (E-4)
(T.R.A. Code: E-3, E-4)
T-433 (E-4)
Rubber volume and compounding for
cut resistance on heavy trucks.
21.00R35
24.00R35
27.00R49
37.00R57
T/L
T/L
T/L
T/L
T-452A (E-4)
Deep tread traction with stone ejectors Modified T452 with increased tread
and cut resistant tread.
depth, contact area, traction and life.
16.00R25
24.00R35
27.00R49
T/L
T/L
T/L
T-332 (E-3)
18.00R33
27.00R49
T/L
T/L
T-351 (E-3)
Longer tread life and reduced irregular Open pattern with flotation for large
wear for ADT's and other machines.
ADT's and small scrapers.
17.5R25
20.5R25
23.5R35
26.5R25
29.5R25
Earthmover Bias Tires
Please contact Fountain Corp. for further information about sizes and specifications.
Rear Dump Truck - Coal Hauler - ADT - Scraper
Narrow base tires
(T.R.A. Code: E-2, E-3,
E-4, E-7)
Wide base tires
12.00-24 (16 PR)
13.00-24 (18 PR)
20.5-25 (16, 20, 24 PR)
14.00-25 (20, 24 PR)
29.5-25 (22, 28, 34 PR)
23.5-25 (16, 20, 24, 32 PR)
14.00-24 (16, 20, 24, 28 PR 26.5-25 (20, 24, 26 PR)
16.00-25 (16, 20, 24, 28 PR 29.5-29 (22, 28, 34, 40 PR)
G-15 (E-2)
G-18 (E-3)
Traction and flotation for Regular rock lug pattern
scrapers and other
for traction, flotation and
construction machinery. cut resistance in a wide
23.5-25 (12, 16, 20 PR) variety of dump truck,
scraper and construction
26.5-25 (16, 20 PR)
29.5-25 (22, 28, 34 PR) applications.
18.00-25 (16, 28, 32 PR) 33.5-33 (22, 32, 38 PR)
21.00-25 (20, 24, 28, 32 PR 37.5-33 (30, 36, 42 PR)
24.00-25 (24, 28 PR)
29.5-35 (28, 34 PR)
18.00-33 (32, 36 PR)
33.25-25 (32, 38 PR)
21.00-35 (32, 36, 40 PR) 37.25-35 (30, 36 PR)
24.00-35 (36, 42, 48 PR) 33.5-39 (38 PR)
24.00-49 (36, 42, 48 PR) 37.5-39 (36, 44, 52 PR)
27.00-49 (42, 48 PR)
G-18ET (E-4)
Deep tread, cut & abrasion
resistant rock lug pattern.
Extra deep tread depth in
comparison to E4 radial tires.
G-44 (E-3)
Size range:
Long haul heat resistant traction tire 16.00-25 (24, 28, 36 PR)
for small dump trucks.
18.00-25 (24, 28, 32, 36 PR)
18.00-33 (28, 32, 36 PR)
14.00-24 (16, 20, 24 PR)
16.00-25 (20, 24, 28 PR)
18.00-25 (20, 24, 28 PR)
18.00-33 (32, 36 PR)
27.00-49 (42, 48 PR)
30.00-51 (46, 52 PR)
33.00-51 (50, 58 PR)
21.00-35 (32, 36, 40, 44 PR)
24.00-35 (36, 42, 48 PR)
24.00-49 (36, 42, 48 PR)
G-28ET (E-4)
G-36ET (E-4)
D-1 (E-7)
Long life and traction for Cut resistance, even
High flotation and low
rolling resistance for soft
small machines.
wear and long life for
trucks on poor surfaces. soil, sand and salt.
14.00-24 (20, 24 PR)
14.00-25 (20, 24 PR)
http://www.fountaintire.com
18.00-25 (24, 28, 32 PR) 14.00-20 (16, 20 PR)
18.00-33 (32, 36 PR)
16.00-20 (20 PR)
21.00-35 (36, 40, 44 PR)
24.00-49 (36, 42, 48 PR)
Loader Bias Tires
Please contact Fountain Corp. for further information about sizes and specifications.
Wheel Loader - Wheel Dozer
G-65 (L-5)
Extra deep tread, extra
cut resistant tire,
available with steel
breaker and side cords.
(T.R.A. Code: L-3, L-4, L5, L-5S)
S-26 (L-5S)
G-55 (L-5)
Slick tire for extremely
poor underfoot areas.
Steel breakers & side
cord available.
35/65-33 (30, 36, 42 PR) 35/65-33 (30, 36 PR)
40/65-39 (30, 36, 42 PR) 45/65-45 (46, 58 PR)
45/65-45 (38, 50, 58 PR)
G-64 (L-4)
Extra deep tread lug
pattern with side &
breaker steel cord for
smaller machines.
17.5-25 (16, 20, 24 PR)
29.5-25 (22, 28 PR)
37.5-39 (44 PR)
G-18ET (L-4)
G-36ET (L-4)
Extra deep pattern for
Large loader/dozer tire.
long life, abrasion
Shoulder protection
available with steel side & resistance and traction.
breaker cords.
Extra deep tread for
superior cut resistance
and long tread life.
35/65-33 (24, 30, 36, 42 PR) 26.5-25 (20, 24, 26, 32 PR)
18.00-25 (32, 36 PR)
G-25 (L-5)
20.5-25 (12, 16, 20, 28 PR)
23.5-25 (12, 16, 20, 24 PR)
26.5-25 (20, 24, 28, 32 PR)
29.5-29 (22, 28, 34 PR)
33.5-33 (32 PR)
33.25-35 (32, 38 PR)
37.25-35 (30, 36, 42 PR)
G-39 (L-3)
Large contact area and
reinforced buttress
improve stability and
reduce sidewall damage
in rough conditions.
20.5-25 (12, 16, 20 PR)
23.5-25 (12, 16, 20, 32 PR)
29.5-29 (22, 28 PR)
G-18 (L-3)
Traditional rock lug pattern for excellent traction and
flotation in most applications.
* Available in special logging service construction.
Available sizes:
12.00-24 (8, 10, 12, 16, 20 PR)
13.00-24 (8, 10, 12, 16, 18 PR)
G-62 (L-3)
14.00-24 (10, 12, 16, 20, 24 PR)
Cut resistant traction
pattern available with
16.00-24 (12, 16, 20 PR)
steel breaker and sidewall 18.00-25 (16, 28 PR)
protection.
20.5-25 (12, 16, 20, 24 PR)
23.5-25 (12, 16, 20, 24 PR)
26.5-25 (16, 20, 24 PR)
29.5-25 (22 PR)
http://www.fountaintire.com
15.5-25 (8, 12 PR)
17.5-25 (12, 16, 20 PR)
20.5-25 (12, 16, 20 PR)
23.5-25 (12, 16, 20, 32 PR)
26.5-25 (20, 24, 28, 32 PR)
29.5-25 (22, 28 PR)
29.5-29 (22, 28, 34 PR)
33.5-33 (44 PR) *
33.25-35 (32, 38 PR) *
37.5-39 (52, 60 PR) *
Grader & Radial Loader Tires
Toyo manufactures a range of bias and radial tires for various grader and small to medium loader
applications. The following exhibits the available patterns and an incomplete list of sizes available.
Please contact Fountain Corp. for further information about sizes and specifications.
Motor Grader
(T.R.A. Code: G-2, G-3, L-3)
G-15 (G-2)
High traction & flotation
for soft sand & soil.
13.00-24 (10, 12, 14 PR)
14.00-24 (12, 14, 16 PR)
16.00-24 (12, 16 PR)
15.5-25 (8, 12 PR)
17.5-25 (12, 16 PR)
G-18 (G-3)
T-331 (G-3)
T-332 (L-3+)
Extra cut resistant for
Cut & abrasion resistant High traction with
for rocky ground.
abrasion resistant tread. long life in mining.
13.00-24 (12, 16, 18 PR)
17.5R25
17.5R25
14.00-24 (12, 16 PR)
20.5R25
20.5R25
18.00-25 (16, 28, 32 PR)
23.5R25
23.5R25
17.5-25 (12, 16 PR)
20.5-25 (12, 16, 20 PR)
23.5-25 (16, 20, 24 PR)
Wheel Loader
T-331 (L-3)
(T.R.A. Code: L-3)
T-332 (L-3+)
T-351 (L-3)
Wear & cut resistance with extra Cut and extra abrasion resistant Wide abrasion resistant pattern
for traction, cut resistance and
traction stone-ejecting pattern.
compound. Solid centre for
stability in rough terrain.
machine support & even wear.
17.5R25
26.5R25
17.5R25
20.5R25
29.5R25
20.5R25 /
23.5R25
23.5R25 /
http://www.fountaintire.com
Industrial Bias & Radial Tires
Please contact Fountain Corp. for further information about sizes and specifications.
Forklift - Container Handler/Straddle - Tow Tractor
R-5
R-7
Ribbed pattern resists irregular
wear and improves wet
handling. Provides superior life
fitted to plane towing tractors.
14.00-25 (20, 24PR)
16.00-25 (24, 28, 32, 36PR)
Ribbed industrial tire for smaller
machines and fork steer
positions on hard formed
surfaces.
12.00-20 (18PR)
(T.R.A. Code: IND, E-3)
T-311
Ribbed tire for straddle,
fork lift and container handler
operations on smooth or
paved surfaces.
)
16.00R25 (
* The G-18A has wider
lugs provider longer
life and less irregular
wear than other lug
pattern tires.
S-10 / S-15*
Slick, long life, wear resistant
patterns for operation on hard
formed surfaces.
12.00-24 (18PR)
14.00-24 (24PR)
16.00-25 (28, 32PR)
*18.00-25 (32,36,40PR)
G-44FW (E-3)
Heat resistant tire for wheel
cranes. Provides extra traction
on all terrain cranes.
14.00-24 (16, 20, 24 PR)
16.00-25 (20, 24, 28 PR)
18.00-25 (20, 24 28PR)
http://www.fountaintire.com
G-18 / G-18A*
Rock lug for sealed and unsealed conditions needing traction and
abrasion resistance.
12.00-20 (18PR)
16.00-25 (28, 32, 36PR)
12.00-24 (12, 16, 18, 20PR)
*18.00-25 (32, 36, 40PR)
13.00-24 (18, 20PR)
21.00-25 (36, 40PR)
14.00-24 (20, 24, 28PR)
24.00-29 (42PR)
14.00-25 (24PR)
T-361 (E-3)
Shallow tread rib for long life
and even wear compared with
conventional lug or block
16.00R25 (
/
)
18.00R25 (
)
Also available in metric sizes.
S-16
Unique combination of half-slick
for long life and reduced
irregular wear, plus a half lug for
traction.
18.00-25 (32, 36, 40PR)
Underground Mining Tires
Please contact Fountain Corp. for further information about sizes and specifications.
Rear Dump Truck - ADT - Shuttle Car
(T.R.A. Code: E-3, E-4)
Bias rock lug for extra
traction on rough
ground. Wide profile
for stability on ADT's or
narrow profile for load
capacity and heat
resistance on hauls.
G-18 (E-3)
12.00-24 (16PR)
14.00-24 (20PR)
16.00-25 (24PR)
18.00-25 (24, 28PR)
15.5-25 (12PR)
17.5-25 (20PR)
20.5-25 (16, 20, 24PR)
23.5-25 (24, 32, 36PR)
26.5-25 (20, 24, 26PR)
29.5-25 (28, 34PR)
29.5-29 (28, 34, 40PR)
T-332 (E-3+)
Extra cut resistance for
small ADT's in mining &
tunnel construction.
17.5R25
20.5R25
23.5R25
(T/L)
Deep bias lug for long life Deep rock lug for traction
in poor work conditions. and extra life on slower
hauling circuits.
18.00-25 (32PR)
18.00-33 (36PR)
18.00-33 (36PR)
21.00-35 (44PR)
21.00-35 (44PR)
26.5-25 (24, 26, 32PR)
29.5-29 (22, 28, 34PR)
Strong open traction
pattern for operation in
steep hauling conditions.
26.5R25
29.5R25
T-431 (E-4)
18.00R33
G-18ET (E4/L4)
T-351 (E-3)
(T/L)
(T/L)
(T/L)
Deep lug for strong cut
resistance in rough
conditions on 40t trucks.
G-36ET (E-4)
(T/L)
(T/L)
T-433 (E-4)
T-452 (E-4)
Deep tread traction and
Strong traction and cut
protection for ejector and special compounds for
dump trucks on rough and poor hauling conditions.
undulating hauls.
21.00R35
(T/L)
16.00R25
(T/L)
24.00R35
(T/L)
24.00R35
(T/L)
http://www.fountaintire.com
T-452A (E-4)
Deeper tread and more
rubber volume for longer
life in poor conditions.
18.00R33
(T/L)
Underground Mining Tires
Please contact Fountain Corp. for further information about sizes and specifications.
Load Haul Dump - Wheel Loader - Toolcarrier
(T.R.A. Code: L-4, L-4S, L-5, L-5S)
T-331 (L-3)
Thick lug traction pattern
for general service small
loaders or IT's.
17.5R25
20.5R25
23.5R25
T-332 (L-3+)
Extra cut resistance for
small loaders or IT's in
mining & tunnelling.
17.5R25
20.5R25
23.5R25
(T/L)
(T/L)
(T/L)
S-15 (L-4S)
(T/L)
(T/L)
(T/L)
G-50 (L-5)
T-351 (L-3)
Strong traction pattern for
safety when working on
steep declines and
uneven drives.
26.5R25 (T/L)
29.5R25 (T/L)
G-25 (L-5)
Extra deep tread plain
Extra deep tread traction
groove pattern for grip in for slippery conditions.
rough conditions (such as
graders).
20.5-25 (16, 20, 28PR)
23.5-25 (16, 20, 24PR)
18.00-25 (24, 28, 32 PR)
12.00-24 (16, 20PR)
26.5-25 (24, 28, 32PR)
20.5-25 (16, 20, 24 PR)
29.5-29 (22, 28, 34PR)
23.5-25 (12, 16, 20 PR)
Deep tread slick for poor
ground conditions with
longer tram distances.
G-55 (L-5)
G-64 (L-4)
Deep tread rock lug for
new series 21 tonne
LHD's on fast cycles or
long trams. Available
with steel breakers.
35/65-33 (36, 42PR)
Extra deep tread traction
with centre protection for
tramming in poor
conditions.
17.5-25 (24PR)
29.5-25 (28PR)
http://www.fountaintire.com
G-36ET (L-4)
Deep tread traction for
long life in poor
conditions. (May also be
suitable for haul trucks.)
18.00-25 (32, 36 PR)
S-25 (L-5S)
Extra deep tread slick for
harsh loading conditions.
12.0024 (16, 20PR)
18.00-25 (24, 28, 32PR)
23.5-25 (16, 20, 24PR)
26.5-25 (24, 28, 32PR)
G-65A (L-5)
S-26 (L-5S)
Extra deep tread traction
with side and steel tread
protection for harsh
conditions. Available with
steel breakers.
Half slick for traction and
extra outside shoulder
protection. Available with
steel breakers.
35/65-33 (36, 42PR)
35/65-33 (36PR)
OFF-THE-ROAD (Earthmoving) TYRE
WARRANTY POLICY
This policy applies to Toyo Off-The-Road (O.T.R.) tyres bearing the Toyo brand and serial number which
are imported and distributed by Toyo Tyre & Rubber Australia Limited (TAL) and sold by TAL’s
authorised resellers in Australia.
Toyo O.T.R. tyres bearing the Toyo brand are manufactured by Toyo Tire & Rubber Co. Ltd and Nippon
Giant Tire Co. Ltd for Toyo Tire & Rubber Co. Ltd.
TOYO O.T.R. TYRES LIMITED WARRANTY
Toyo O.T.R. tyres are warranted against defects in workmanship or materials for the original useable
tread life. If the tyre is judged defective, pro rata compensation will be made for the remaining tread
depth against the original tread depth.
EXCLUSIONS AND LIMITATIONS BY THIS POLICY
1. Tyres branded “NA” (No Adjustment) are not adjustable under this warranty.
2. Warranties do not cover damage due to road hazards (e.g. cut, snag, bruise, impact or puncture, etc.).
3. Warranties do not cover damages due to misalignment, improper inflation, overloading, fire, theft,
defective mechanical conditions such as brakes, shock absorber or rims, wreck or collision, wilful
damage, abuse or incorrect application.
4. Warranties do not cover damage due to use of an improper inner tube or with a valve not
recommended by The Tyre & Rim Association of Australia.
5. Adjustments are based on the warranty which was valid and in effect at the time the tyre was
6. All implied warranties including any warranty of merchandising or of suitability for a particular
purpose, are expressly limited to the duration of this written warranty.
7. All obligations or liabilities for incidental or consequential damages including loss of time,
inconvenience, loss of use of the vehicle, damage of vehicle are hereby excluded.
8. Charges for unfitting or fitting.
9. Tyres imported by a person or persons or company other than Toyo Tyre & Rubber Australia Limited.
10 Tyres with special warranty, if any.
OWNER’S OBLIGATIONS
You must present the tyre for adjustment to an authorised TAL reseller or Toyo Tyre & Rubber Australia
Limited, together with further information as TAL may reasonably request for properly processing the
warranty claim form.
FINAL ARBITER
The final decision regarding the approval of O.T.R. tyre adjustments is reserved by the Tyre Technical
Department of Toyo Tyre & Rubber Australia Limited.
Toyo Tyre & Rubber Australia Limited is quality certified by Benchmark to ISO 9001:2000
Toyo Tyre & Rubber Australia Limited
http://www.fountaintire.com
TAL OTR Warranty 040204
Field Sales, Service and Technical Support
Toyo manufacturers a broad range of Off-The-Road (OTR) tyres with compounds and construction that
are able to be specifically matched to operators requirements and conditions to achieve low operating costs.
Sales representative and support staff at each of our seven locations can provide information about the full
range of passenger, light truck, truck & bus (PTB) and OTR tyres manufactured.
Product specific advice, in the field technical and support service, for the full range of PTB and OTR tyres, is
coordinated through Head Office to assist in all selection, recommendation and operational matters for
Toyo's range. Personnel are constantly in the field conducting activities such as fleet inspections, monitoring
test products, and advising on maintenance and product to suit all types of vehicle operations and
machine types.
Toyo National Network
HEAD OFFICE
SYDNEY
6 - 14 COSGROVE ROAD, ENFIELD, NSW 2136 (PO BOX 117, ENFIELD, NSW, 2136)
PH (02) 9642 0177 FAX (02) 9742 5519
EMAIL: [email protected]
WEBSITE: www.toyo.com.au
BRANCH OFFICES
ADELAIDE
BRISBANE
MELBOURNE
NEWCASTLE
PERTH
SYDNEY
TOWNSVILLE
4/40 Birralee Rd, Regency Park, SA, 5942
Freecall 1800 897 323 Ph (08) 8347 1551 Fax (08) 8347 2232
689 Boundary Rd, Coopers Plains, QLD, 4814
Freecall 1800 897 327 Ph (07) 3277 9755 Fax (07) 4775 5644
42-52 Strezlecki Ave, Sunshine, VIC, 3020
Freecall 1800 897 363 Ph (03) 9311 6696 Fax (03) 9311 6635
12 Arunga Rd, Beresfield, NSW, 2322
Freecall 1800 897 362 Ph (02) 4966 0091 Fax (02) 4966 0095
100-102 Poole St, Welshpool, WA, 6106
Freecall 1800 897 373 Ph (08) 9351 8077 Fax (08) 9451 2408
6 Cosgrove Rd, Enfield, NSW, 2136
Freecall 1800 897 379 Ph (02) 9742 2233 Fax (02) 9742 2234
112 Dearness St, Garbutt, QLD, 4814
Freecall 1800 897 388 Ph (07) 4775 5644 Fax (07) 4775 6977
Toyo's branch sales and
warehouse network supports
mining, construction and
commercial operations in all
states and territories of
Australia.
Quality Management and
Environmental Management
Toyo Tyre & Rubber Australia Limited has as a quality management system based on the
principles of ISO 9001:2000 and have been certified by Benchmark.
Our aim is to provide quality product and service through constant review of our Australian
ordering, warehousing, despatch and delivery systems, and feedback to Japan on product performance.
Toyo's Japanese production facilities operate under stringent company standards to ensure quality
throughout production and as a result are certified under ISO9000 for quality management, and ISO14000
for environmental management systems.
Details of Toyo's quality and environmental management certifications can be provided upon request.
http://www.fountaintire.com
Revised 25/02/2004
TALOTR_RB