PRESENTAZIONE ATTIVITA` SIIEM S.R.L

Cividale, 31/07/2012
Pag. 1 di 11
PRESENTAZIONE ATTIVITA' SIIEM S.R.L
Progettazione impianti, servizi e forniture
Desideriamo illustrarVi le attività della ns società, costituita da un gruppo di tecnici che, unendo la propria
esperienza e capacità, sono in grado di fornire i servizi tecnico - professionali di progettazione
ingegneristica di base e di dettaglio in ausilio ai Vs uffici tecnici in materia elettrica, meccanica, civile ed
impiantistica.
Il gruppo di lavoro, così costituito, ha una potenzialità e flessibilità in grado di offrire un’ ampia
collaborazione con i Vs uffici tecnici, commerciali ed acquisti nell’ attivazione e gestione delle commesse
nelle loro parti complementari; in particolare:
o
o
o
o
o
Collaborazione con gli incaricati del progetto generale per la preventivazione delle parti
impiantistiche, con la possibilità di intervenire come supporto negli incontri tecnici con il cliente
finale;
Assistenza ai progettisti o ai responsabili di commessa nella scelta e nella definizione delle
soluzioni tecnico - economiche ottimali nelle parti complementari di macchina o di impianto;
Assistenza agli uffici acquisti mediante l’elaborazione di documentazione per le richieste di
offerta, con controllo ed analisi delle offerte;
Elaborazione di tutta la documentazione di ingegneria relativa alla realizzazione degli impianti;
Cooperazione ai montaggi, avviamento e collaudo degli impianti;
Al fine di razionalizzare l'impiego di energie, è ns prassi affidare la gestione tecnica ad un unico
interlocutore che opererà con i Vs incaricati, avvalendosi di volta in volta del ns personale più qualificato e
consono alla materia trattata.
In particolare, la ns struttura è in grado di offrire, in linea generale e non limitativa, i servizi sopra descritti
nelle seguenti specializzazioni:
a)
Elettrica e automazione
Progettazione apparecchiature ed impianti AT-MT-BT
Progettazione HW, sistemi BT ed automazione
Ingegneria di installazione, di base ed esecutiva
Progettazione SW con messa in servizio
Manuali uso e manutenzione
Progettazione impianti civili e terziari
Ingegneria di installazione e progettazione di impianti industriali/siderurgici
Assistenza al cantiere e all'avviamento
b)
Meccanica e piping
Progettazione impiantistica pneumatica, oleodinamica ed idraulica
Progettazione di carpenterie e strutture varie
Sviluppo piping di macchine e di impianti con progettazione esecutiva
Assistenza al cantiere e all'avviamento
c)
Impiantistica HVAC
Progettazione di impianti idrotermosanitari
Progettazione di impianti di condizionamento/ventilazione
Assistenza al cantiere e all'avviamento
d)
Civile
Progettazione di base, studi di fattibilità
Progettazione di edifici, ponti e strade
Progettazione esecutiva, calcoli e relazioni
Rilievi, studi geologici, geotecnica
e)
Ferroviario
Progettazione di base ed esecutiva impianti di segnalamento
Progettazione di base ed esecutiva impianti di trazione elettrica (MT/BT)
Progettazione di base ed esecutiva impianti di illuminazione e prese
Revisione progetti IS e TE
Piani di sicurezza
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 2 di 11
La SIIEM si avvale anche di collaborazioni professionali esterne di comprovata esperienza.
Per l'elaborazione delle documentazioni progettuali la SIIEM si avvale di mezzi tecnici
informatici tra i più evoluti presenti sul mercato, adeguandosi alle esigenze/normalizzazioni interne dei
clienti.
DATI INFORMATIVI
SIIEM S.R.L. - Anno di costituzione: 1992
Uffici e sede legale:
Via S. Apollonia, 53 – 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375-76 Fax. +39 0432 701374
P. IVA: 01755200308
Capitale Sociale: €. 31.200,00
Amministratore delegato:
Per. Ind. Buzzi Corrado
E-Mail:
Ufficio tecnico impianti elettrici, fondazioni e piping
Ufficio amministrativo e commerciale
[email protected]
[email protected]
Personale tecnico costituito da (compresi collaboratori professionisti esterni):
-
Impianti elettrici
Impianti ferroviari
Impianti piping
Impianti civili
Progettazione SW
Servizi di segreteria
n. 7 unità (n. 1 collaboratore professionista)
n. 1 unità (collaboratore professionista)
n. 1 unità (collaboratore professionista)
n. 2 unità (collaboratori professionisti)
n. 2 unità (collaboratori professionisti)
n. 3 unità (amministrazione ed ufficio tecnico)
-
Uffici tecnici
Attrezzature
-
Programmi SW
mq 350
PC (gestione in rete)
PC portatili
stampanti (formato A4-A3)
scanner (formato A4-A3)
fotocopiatrici (formato A4-A3)
plotter a getto di inchiostro a colori (formato A0)
tecnigrafi
Autocad 2002 ÷ 2013
Autocad LT
Autocad R14
Cadlet 2008
Office 2003 – 2010
Programma per dimensionamento cavi e linee
Programma per calcoli illuminotecnici
Programmi dedicati Siiem per computi metrici IS TE LFM
Programmi dedicati Siiem per gestione commesse e contabilità
Programmi dedicati Siiem per programmazione lavori
Alleghiamo le referenze e le principali attività di ingegneria svolte dalla ns società.
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 3 di 11
PRINCIPALI ESPERIENZE E REALIZZAZIONI DI INGEGNERIA
(E) = Ingegneria elettrica
(F) = Fondazioni
(P) = Ingegneria piping / meccanica
(S) = Supervisione montaggi
-
ABB - GERMANY
(E)
(E)
(E)
(E)
(E)
(E)
BAL SKS (China)
CAPL SKS (China)
CRM2 SKS (China)
CRM3 SKS (China)
Tender for HAPL TKS-NEW STAR (USA)
Tender for CAPL TKS-NEW STAR (USA)
-
ABB - ITALY
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
ZR TANG-ENG (Taiwan)
SPM TANG-ENG (Taiwan)
ZR CHAN MIENG (Taiwan)
Hot rolling mill EL DIKEILA (Egypt)
CRM POSCO (Korea)
CRM NAS (USA)
CRM power factor correction ACESITA (Brazil)
Hot profile mill FERALPI - RIESA (Germany)
Mill revamping SIDER (Algeria)
ZR 54” Cold rolling mill AST (Italy)
ZR 62” Cold rolling mill AST (Italy)
Alluminium mill (Italy)
MV Power factor correction for alluminium mill (Italy)
Alluminium mill PECHINEY (France)
Alluminium mill CARCANO (Italy)
HW PLC engineering planning HADEED (Arabia)
ZR1 Cold rolling mill (Taiwan)
Strip treatment line BAOYONG (China)
Profile mill revamping MOBARAKE (Iran)
Paper mill revamping SARIO (Italy)
ZR Cold rolling mill YUSCO (Taiwan)
Cold rolling mill SKS (China)
SPM Cold rolling mill SKS (China)
BAL Strip treatment line AST (Italy)
BAL2 Strip treatment line AST (Italy)
ZR2 Cold rolling mill (Taiwan)
Copper mill EUROPA METALLI (Italy)
Alluminium mill revamping ALCOA (Italy)
SB ZR Cold rolling mill LISCO (China)
MB ZR Cold rolling mill LISCO (China)
Mill revamping FERRIERE NORD (Italy)
ZR7 Cold rolling mill AST (Italy)
4Hi Alluminium mill CARCANO (Italy)
LAC 10 Line TKAST (Italy)
ZR 54” Cold rolling mill relocation TKAST (Italy)
ZR 62” Cold rolling mill relocation TKAST (Italy)
MV power factor correction for ZR 54” mill TKAST (Italy)
SPM 62” Cold rolling mill relocation TKAST (Italy)
Plant ENIOIL MAN (Arabia)
ZR Z10 Cold rolling mill TKAST (Italy)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 4 di 11
-
ABB - CHINA
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
APL1 Strip treatment line BAOYONG (China)
APL2 Strip treatment line BAOYONG (China)
CGL SKS (China)
CTL SKS (China)
SL SKS (China)
HAPL Strip treatment line BAOXIN (China)
CAPL Strip treatment line BAOXIN (China)
SPM Cold rolling mill BAOXIN (China)
HAPL4 Strip treatment line YUSCO (China)
CAPL JISCO (China)
DRAPL JISCO (China)
GPL JISCO (China)
SPM JISCO (China)
EDTL1-EDTL2 JISCO (China)
HAPL4 SKS (China)
CAL YICHANG (China)
CAPL TISCO (China)
DRAPL SHANGHAI (China)
CRM ORNASTEEL (Malaysia)
SPM TISCO (China)
CRM5 YUSCO (Kaohsiung - Taiwan)
CRM6 YUSCO (Kaohsiung - Taiwan)
HAPL2 LISCO (China)
RCM1 TONGHUA (China)
RCM2 TONGHUA (China)
SPM Cold rolling mill TONGHUA (China)
BAL STAL SHANGHAI (China)
CAL MEISHAN (China)
RCM3 TPCO (China)
RCM4 TPCO (China)
RCM1 RUIMIN (China)
SPM Cold rolling mill SHANGAI (China)
CAPL SHANGAI (China)
CL STAL (China)
RCM1 Alluminium mill PINGAN (China)
RCM2 Alluminium mill PINGAN (China)
HAPL NEW STAR-TKS (USA)
HCPL NEW STAR-TKS (USA)
SPM Cold rolling mill CHUNG HUNG STEEL (Taiwan)
RCM1 Alluminium mill XIASHUN (China)
HAPL-ARP FUXIN (China)
HAPL on board wiring FUXIN (China)
-
ALSTOM POWER - ITALY
(E)
(E)
(E)
(E)
(E)
Fumes treatment plant MALAYAWATA (Malaysia)
Fumes treatment plant CUKUROVA (Poland)
Water treatment plant ABU ZAABAL (Egypt)
Fumes treatment plant DE ACERO (Mexico)
Fumes treatment plant EARSCO (Egypt)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 5 di 11
-
ANDRITZ - AUSTRIA
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
CAPL SALEM (India)
ARP SALEM (India)
CAPL JINDAL (India)
HAPL SALEM (India)
ARP ACERINOX (Malaysia)
ARP ARVEDI (Italy)
CAPL ZPSS ZHANGJIAGANG STEEL (China)
PPL-ARP LISCO (China)
ARP HUA-CO (China)
-
ASTER - ITALY
(E)
(E)
(E)
(E)
(E)
(E)
(E)
Factory reorganization FIAT LINGOTTO (Italy)
Installation materials estimation FIAT LINGOTTO (Italy)
MV/LV distribution FIAT LINGOTTO (Italy)
Hotel by FIAT LINGOTTO (Italy)
New meeting center by FIAT LINGOTTO (Italy)
Trading center by FIAT LINGOTTO (Italy)
New trade exhibition by Milan (Italy)
-
AST TERNI - ITALY
(E)
BA2 TKAST (Italy)
-
PRIVATE CUSTOMERS
ITALY
(E)
(E)
(E)
Civil electrical installation
Hotel “Valle Verde” electrical systems revamping (Italy)
“Banca BCC” electrical systems revamping (Italy)
-
CONCAST - ITALY/SWISS
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
Melt shop NAMHENG (Thailand)
Melt shop and continuous casting SHANGAI (China)
Continuous casting ANSDK (Egypt)
Continuous casting ABU ZAABAL (Egypt)
Continuous casting revamping SHANGHAI 5 (China)
Paper mill revamping (Italy)
Continuous casting revamping (Turkey)
Continuous casting EARSCO (Egypt)
Water treatment plant (Egypt)
Building electrical systems EARSCO (Egypt)
Continuous casting CELSA (UK)
Continuous casting 5L GERDAU (Brazil)
Continuous casting GERDAU (Canada)
Continuous casting TAGANROG (Russia)
Continuous casting 6L SHANGHANG (China)
Continuous casting 3L MECHEL (Romania)
Continuous casting 3L CARONNO (Italy)
Melt shop TIAN JIN (China)
Melt shop EL FOULADH (Egypt)
Continuous casting JINDAL (India)
Melt shop NINL (India)
Melt shop PNTZ (Russia)
EAF furnace (Greece)
Melt shop SIAM YAMATO (Thailand)
Melt shop OKZAN STEEL (Turkey)
Melt shop SOUTH STEEL (Arabia)
Melt shop revamping QATAR STEEL CO. (Qatar)
CCM PATRATU (India)
CCM 6 lines CHADORMALU (Iran)
HOD furnace (Israel)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 6 di 11
(E)
(E)
(E)
(E)
Melt shop SULB (Bahrain)
Melt shop CONTECH RIO BRAVO (Mexico)
CCM SHAGANG (China)
Melt shop GV DO BRASIL (Brazil)
-
DANIELI - ITALY
(E)
(E)
(P)
(P)
(E)
(E)
(E)
(E)
Melt shop CHIN TAI (Taiwan)
Melt shop YAZD (Iran)
Interconnecting piping for mill SHUNG FUNG (China)
Interconnecting piping for mill HEFEI (Thailand)
HV/MV/LV electric cabin design TAKADO (Iran)
Hot rolling mill AL EZZ (Egypt)
Lighting system for factory YAZD (Iran)
Auxiliary systems for factory YAZD (Iran)
-
DEAL - ITALY
(E)
(E)
LV electrical projects for building yard machines
Engineering installation for civil building yard
-
DREVER - BELGIUM
(E)
HAPL on board wiring TKL (USA)
-
EEI - ITALY
(E)
Textile plant NOY VALLESINA (China)
-
EUROPA METALLI - ITALY
(E)
(E)
(P)
LV electrical projects for building yard machines
Electric cabin project for copper mill
Water interconnecting piping for copper mill
-
ETEAM - ITALY
(E)
Spheres production plant MEPSA SA (Chile)
-
FATA - ITALY
(E)
(E)
(E)
(E)
(E)
(P)
(P)
(E)
(E)
(E)
(P)
(P)
(E)
(P)
(E)
(P)
(P)
(P)
(P)
(E)
(P)
(E)
(E)
(E)
(P)
(E)
(P)
Cold alluminium mill ZALK (Russia)
Alluminium casting machine ZALK (Russia)
Alluminium casting machine (India)
Cold alluminium mill (India)
Cold alluminium mill ALUMPARS (Iran)
Lubrication and water intercon. piping ALUMPARS (Iran)
Piping for alluminium casting machine (Italy)
Alluminium casting machine (Italy)
Alluminium finishing mill HEZAR (Iran)
Alluminium rough-hewer mill HEZAR (Iran)
Interconnecting piping for alluminium mill HEZAR (Iran)
Water piping for alluminium mill HEZAR (Iran)
Alluminium mill HEZAR (Iran)
Piping for alluminium casting machine HEZAR (Iran)
Alluminium casting machine HEZAR (Iran)
Steel structure project for line (China)
Piping for mill ALA (Brescia - Italy)
Piping for alluminium mill NANSHAN (China)
Piping for alluminium mill HUNAN (China)
Alluminium mill (Ghana)
Interconnecting piping for MMK line (Russia)
MMK Line (Russia)
Smelter GARMCO (Oman)
Mill WANJI (China)
Mill WANJI (China)
Cold mill and hot mill MADAR (Syria)
Cold mill and hot mill MADAR (Syria)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 7 di 11
(P)
(P)
(E)
(P)
(E)
(P)
TLL 1-2 WANJI (China)
TLL 3-4 NANSHAN (China)
Hot mill, cold mill and tension leveller GARMCO (Oman)
Hot mill, cold mill and tension leveller GARMCO (Oman)
Coil coating line WEIQIAO (China)
Coil coating line WEIQIAO (China)
-
GEMMO - ITALY
(E)
(E)
(E)
(E)
(E)
(E)
(E)
Tender for bus maintenance building ATESINA (Italy)
Revamping CED ALITALIA (Italy)
Tender for HV/MV substation (Ethiopia)
Tender for a new trade center (Libya)
Tender for a new management center (Libya)
Tender for a new alluminium profile factory (Libya)
Tender for a new management center (Palestine)
-
GEODATA - ITALY
(E)
CHENANI – NASHRI tunnel (India)
-
GOODYEAR - LUXEMBOURG (E)
(E)
Operator/maintenance manuals for R2.5 m/c
machine
User manuals for NTEC machine
-
INTIS - ITALY
(E)
ZIN1 line revamping RIVA (Italy)
-
ITALFERR / RFI - ITALY
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
“Rete Sarda” (railway network) signalling renovation
“Milano – Treviglio” railway line signalling expansion
Technical buildings near “Rete Sarda” equalization
Buildings/Administration offices electrical systems
El. traction executive planning for Torino railway junction
El. traction executive plan for Treviglio railway junction
El. traction executive plan for Venezia railway junction
Venezia railway junction lighting system renovation
Verona railway junction lighting system renovation
Cagliari railway junction lighting system renovation
Valsugana railway junction lighting system renovation
Firenze railway junction lighting system renovation
Firenze railway junction el. traction executive planning
Bologna railway junction el. traction executive planning
Padova/Mestre high voltage line check
RFI - Latisana bridge el. traction executive planning
RFI - Venezia railway el. traction executive planning
RFI – lighting systems executive planning
-
HONEYWELL - ITALY
(E)
(E)
Automation system for FIAT LINGOTTO (Italy)
Automation system for hotel by FIAT LINGOTTO (Italy)
-
MARANGONI - ITALY
(E)
Electrical engineering and operation/maintenance
manuals for tyre production line GOOD YEAR (USA)
-
MINO - ITALY
(E)
(E)
(E)
(E)
(P)
(E)
Cold rolling mill (Russia)
Alluminium mill (Italy)
SPM CRM (China)
Cold rolling mill (Belgium)
Cold rolling mill (Belgium)
Alluminium mill (China)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 8 di 11
(P)
(E)
(P)
(E)
(E)
(E)
(P)
Cold rolling mill (China)
Cold rolling mill (China)
Steel structure and machinery project for line
Cold rolling mill JANTAIL (China)
Cold rolling mill TIJANJIN (China)
Cold rolling mill LISCO (Libya)
Cold rolling mill LISCO (Libya)
-
MODITECH - ITALY
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
Installation materials estimation for BALLESTRA (Italy)
Washing up plant BALLESTRA (Morocco)
Paper mill revamping SARIO (Italy)
Paper mill revamping VILLA S.LUCIA (Italy)
MV/LV plant commissioning BALLESTRA (Libya)
MV/LV plant start up BALLESTRA (Libya)
Cold rolling mill PECHINEY (France)
MV/LV plant start up BALLESTRA (Syria)
Melt shop CELSA (UK)
Melt shop LISCO (Libya)
Thin Slab Caster ARVEDI (Italy)
ESP rolling mill ARVEDI (Italy)
-
MONTEDISON - ITALY
(E)
Factory expansion SIR (Italy)
-
NUOVA MAGRINI GALILEO
SCHNEIDER - ITALY
(E)
(E)
(E)
(E)
(E)
HV/MV/LV substation revamping ACEA (Roma)
SST Ardeatina ACEA (Roma)
132/6 KV SST revamping MEMC (Italy)
Installation supervision for MV distribution (Iraq)
132/10 KV SST revamping FINCANTIERI (Italy)
-
ORU - ITALY
(E)
(E)
LV electrical systymes for building yard machines
Engineering installation for civil building yards
-
PERT - ITALY
(E)
(E)
(E)
Meltshop MED STEEL (Syria)
Steel Meltshop TENOVA SAMEN (Iran)
Steel Meltshop TENOVA SHADEGAN (Iran)
-
PIGOZZI IMPIANTISTICA
ITALY
(E)
(E)
MV cable ways revamping ENEL (Italy)
MV/LV commissioning
-
PITTINI IMP. IND. - ITALY
(E)
(F)
Electrical revamping
Foundations for driving machines
-
POMINI TECHINT - ITALY
(E)
(E)
(E)
(E)
(P)
(E)
(E)
(E)
Tube mill revamping DALMINE (Italy)
Wire rod mill ANSDK (Egypt)
Profile packer (Germany)
Slab continuous casting (India)
Piping for continuous casting (India)
6L continuous casting (Russia)
Expediting for continuous casting BES (Germany)
Expediting for continuous casting (Italy)
-
PZ - IMPRESA PIEMONTE
ITALY
(E)
(E)
Civil electrical installation – Italian law 46/90
Post office electrical installation projects
-
RIPA - ITALY
(E)
Installation manuals
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 9 di 11
-
RIZZANI DE ECCHER - ITALY (E)
(E)
Bridge lighting system (Afghanistan)
LV electrical systems for building yard machines
-
ROCKWELL - SWITZERLAND (E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
CAPL LISCO (China)
CAPL 4 YUSCO (Kaohsiung - Taiwan)
APL ACERINOX (Malaysia)
SPM ACERINOX (Malaysia)
Neutralization plant ACERINOX (Malaysia)
Electrical installation engineering and manuals activities
for flipping machine GOODYEAR (Luxembourg)
ATL ALCOA (USA)
CHTL ALCOA (USA)
-
SIC - ITALY
(E)
Steel plant (Myanmar)
-
SIEMENS - USA
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
CRM4 TISCO (China)
CRM5 TISCO (China)
CRM6 TISCO (China)
CRM7 TISCO (China)
CRM8 TISCO (China)
CRM1 TISCO (China)
CRM2 TISCO (China)
CRM3 TISCO (China)
Tender for CGL1÷CGL4 TKS-NEW STAR (USA)
SB22 – 54” sendzimir CHIA FAR (Taiwan)
ZR 21 AN 65 Cold rolling mill TISCO (China)
-
SIEMENS - CHINA
(E)
(E)
(E)
(E)
(E)
(E)
CRM 20Hi BSSB (China)
CRM 6Hi BSSB (China)
CRM-SPM BSSB (China)
BAL BSSB (China)
HCAL BSSB (China)
CPL BSSB (China)
-
SIDERMONTAGGI - ITALY
(E)
Hot rolling mill (Russia)
-
SMS SIEMAG - GERMANY
(F)
(F)
(F)
(F)
(P)
(P)
(P)
(E)
(E)
(E)
(E)
(E)
(P)
(P)
(P)
(P)
Civil works foundations for ZR AST (Italy)
ZR CM civil works foundations (Taiwan)
Civil works foundations for ZR SKS (China)
Civil works foundations for ZR SPM (China)
ZR YUSCO (Taiwan)
CRM5 YUSCO (Taiwan)
CRM6 YUSCO (Taiwan)
CRM4 TISCO (China)
CRM5 TISCO (China)
CRM6 TISCO (China)
CRM7 TISCO (China)
CRM8 TISCO (China)
Cold rolling mill LISCO (China)
CRM2 20Hi BSSB (China)
CRM3 TPCO (China)
CRM4 TPCO (China)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 10 di 11
-
SMS DEMAG INNSE - ITALY
(E)
(P)
(P)
(P)
(E)
(E)
(E)
(E)
(P)
(E)
Press machine ILVA (Italy)
Cold rolling mill AST (Italy)
ZIN1 galvanic line RIVA (Italy)
ZIN2 galvanic line RIVA (Italy)
Civil works project for ZR 54” electric cabin (Italy)
Civil works project for SPM 62” electric cabin (Italy)
ZIN1-ZIN2 line RIVA (Italy)
Tube mill revamping VOLZHSKY (Russia)
Tube mill revamping VOLZHSKY (Russia)
Revamping for ACRONI mill (Slovenia)
-
SMS MEER - ITALY
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
Finishing mill area (China)
Hot rolling mill (UK)
Hot rolling mill NAMHENG (Thailand)
Hot rolling mill BMP (Brazil)
Bar mill EARSCO (Egypt)
Wire rod mill EARSCO (Egypt)
Hot rolling mill HATTAL (Egypt)
Hot rolling mill (Mexico)
Hot rolling mill GULF (Arabia)
Hot rolling mill (Korea)
Hot rolling mill (Russia)
Finishing mill area DUFERCO (Danemark)
Hot rolling mill NATIONAL (Syria)
Hot rolling mill METALLO INVEST (Arabia)
Hot rolling mill ABINKS (Russia)
Hot rolling mill (Brescia - Italy)
Hot rolling mill ZARAGOZA 1 (Spain)
Hot rolling mill ZARAGOZA 2 (Spain)
Hot rolling mill (Syria)
Hot rolling mill CJSC KSIEMP (Russia)
WBF furnace ARCELOR MITTAL (Germany)
RM2 Rolling mill SOUTH STEEL (Arabia)
-
SNAIDERO - ITALY
(E)
Tender for forniture factory (Lithuania)
-
SOECO - ITALY
(E)
(E)
(E)
ZR Cold rolling mill AST (Italy)
BA2 Line AST (Italy)
LAC10 Line (Italy)
-
STB - ITALY
(E)
Slab continuous casting (Russia)
-
SUNDWIG - GERMANY
(P)
(E)
(E)
DRAPL JISCO (China)
CRM1 - CRM2 TISCO (China)
CAPL BAOSHAN (China)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531
Cividale, 31/07/2012
Pag. 11 di 11
-
SUPERVISION ACTIVITIES
ON SITE
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
ZR Cold rolling mill SMS DEMAG NAS (USA)
ZR Cold rolling mill SMS DEMAG ACESITA (Brazil)
APL DMS-BAOYONG (China)
Hot rolling mill revamping POMINI EARSCO (Iran)
Wire rod mill POMINI POSEC (Egypt)
HV/MV power plant DJIBOUTI (Arabia)
Alluminium mill ETIBANK (Turkey)
Textile plant NOY VALLESINA (China)
Copper mill SMS DEMAG EUROPA METALLI (Italy)
ZR Cold rolling mill SMS DEMAG SKS (China)
ZR Cold rolling mill SMS DEMAG YUSCO (Taiwan)
Industrial factory reorganization FIAT LINGOTTO (Italy)
Tube mill revamping TECHINT (Dalmine - Italy)
Continuous casting TECHINT BES (Germany)
Continuous casting POMINI TECHINT (Russia)
Automation system for FIAT LINGOTTO (Italy)
Continuous casting (Russia)
MV/LV plant commissioning BALLESTRA (Libya)
MV/LV plant start up BALLESTRA (Libya)
BAL SUNDWIG SKS (China)
Melt shop VAI CELSA (Cardiff - UK)
SB Cold rolling mill SMS DEMAG LISCO (China)
MB Cold rolling mill SMS DEMAG LISCO (China)
RCM 1 Cold rolling mill SUNDWIG TISCO (China)
RCM 2 Cold rolling mill SUNDWIG TISCO (China)
CRM 5 Cold rolling mill SMS DEMAG YUSCO (Taiwan)
CRM 6 Cold rolling mill SMS DEMAG YUSCO (Taiwan)
CAL YUSCO (Taiwan)
Mill revamping SIDERIMPES (Asil Celik - Turkey)
Hot strip mill SMS SIEMAG (Alabama - USA)
ARP ARVEDI (Cremona - Italy)
SB22 – 54” sendzimir CHIA FAR (Taiwan)
ZR 21 AN 65 Cold rolling mill TISCO (China)
-
TECHINT - ITALY
(E)
Tube mill TAMSA (Mexico)
-
TECNOMONTAGGI ALIANI
ITALY
(E)
(E)
Enquiry for coke plant DUFERCO (Belgium)
Wire rod mill Drahtruhr ARCELOR MITTAL (Germany)
Siiem srl - Via S. Apollonia, 53 - 33043 Cividale del Friuli (UD) ITALIA
Tel. +39 0432 701375 Fax +39 0432 701374 - P.IVA / VAT n. 01755200308
E-mail: [email protected] Web: www.siiem.com
UNI EN ISO 9001 – 2008
Certif. n. 501009531