Niles - Davis Distribution

Transcription

Niles - Davis Distribution
16
PRICING 20
of Kicker for
OH, WV, W-PA, IN & KY
DS DIRECTED SOUNDFIELD SPEAKERS
DS7HD (EACH)
DS7MP (EACH)
- 7” Ceiling-Mount Surround Effects Loudspeaker
- Recommended Amplifier Power: 10 - 140 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 52 Hz To 21 KHz +/ -3 DB
- Maximum SPL: 107 DB
- Voice Coil Size: 1.25”
- Crossover Frequency: 2.8 KHz
DS7FX (PAIR)
- 7” Left/Center/Right Ceiling-Mount Loudspeaker
- Recommended Amplifier Power: 10 - 160 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 48 Hz To 21 KHz +/ -3 DB
- Maximum SPL: 109 DB
- Voice Coil Size: 1-1/4”
- Crossover Frequency: 2.8 KHz
- 7” Left/Center/Right Loudspeaker
- Recommended Amplifier Power: 10 - 130 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 55 Hz To 21 KHz +/ -3 DB
- Maximum SPL: 105 DB
- Voice Coil Size: 1”
- Crossover Frequency: 2.8 KHz
MSRP $470.00
MSRP $415.00
MSRP $210.00
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
MSRP $49.95
RWE7C (REAR WAVE ENCLOSURE)
RWE7C (REAR WAVE ENCLOSURE)
RWE7C (REAR WAVE ENCLOSURE)
MSRP $110.00
MSRP $110.00
MSRP $99.95
SG7C (SQUARE GRILLE)
SG7C (SQUARE GRILLE)
SG7C (SQUARE GRILLE)
MSRP $74.95
MSRP $74.95
MSRP $74.95
DS7PR (EACH)
DS7SI (EACH)
- 7” Left/Center/Right Ceiling-Mount Loudspeaker
- Recommended Amplifier Power: 10 - 130 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 52 Hz To 21 KHz +/ -3 DB
- Maximum SPL: 107 DB
- Voice Coil Size: 1”
- Crossover Frequency: 2.8 KHz
- Magnet Weight: 19.5 Oz.
- Multipurpose Directed Soundfield Stereo Input
Loudspeaker; 7”, 2-Way
- Recommended Amplifier Power: 10 - 130 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 55 Hz To 21 KHz +/ -3 DB
- Maximum SPL: 105 DB
- Voice Coil Size: 1”
- Crossover Frequency: 2.8 KHz
MSRP $315.00
MSRP $260.00
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
RWE7C (REAR WAVE ENCLOSURE)
RWE7C (REAR WAVE ENCLOSURE)
MSRP $110.00
MSRP $110.00
SG7C (SQUARE GRILLE)
SG7C (SQUARE GRILLE)
MSRP $74.95
MSRP $74.95
Updated: September 6, 2016
1
DS DIRECTED SOUNDFIELD SPEAKERS
DS8FX (PAIR)
DS8HD (EACH)
DS8PR (EACH)
- 8” Surround Effects Loudspeaker
- Recommended Amplifier Power: 10 - 160 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 48 Hz To 21 KHz
+/ -3 DB
- Maximum SPL: 115 DB
- Voice Coil Size: 1-1/4”
- Crossover Frequency: 2.8 KHz
- 8” Left/Center/Right Ceiling-Mount Loudspeaker
- Recommended Amplifier Power: 10 - 160 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 48 Hz To 21 KHz
+/ -3 DB
- Maximum SPL: 115 DB
- Voice Coil Size: 1-1/4”
- Crossover Frequency: 1.5 KHz/4 KHz
- 8” Left/Center/Right Ceiling-Mount Loudspeaker
- Recommended Amplifier Power: 10 - 140 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 48 Hz To 21 KHz
+/ -3 DB
- Maximum SPL: 112 DB
- Voice Coil Size: 1-1/4”
- Crossover Frequency: 1.5 KHz/4 KHz
MSRP $780.00
MSRP $449.95
MSRP $349.95
NCB8C (CONSTRUCTION BRACKET)
NCB8C (CONSTRUCTION BRACKET)
NCB8C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
MSRP $50.00
RWE8C (REAR WAVE ENCLOSURE)
RWE8C (REAR WAVE ENCLOSURE)
RWE8C (REAR WAVE ENCLOSURE)
MSRP $110.00
MSRP $110.00
MSRP $110.00
SG8C (SQUARE GRILLE)
SG8C (SQUARE GRILLE)
SG8C (SQUARE GRILLE)
MSRP $74.95
MSRP $45.95
MSRP $45.95
CEILING MOUNT SPEAKERS
CM8SI (EACH)
CM8HD (EACH)
- 8” Two-Way 2-Way Stereo Input Ceiling-Mount Loudspeaker
- Recommended Amplifier Power: 10 - 130 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 55 Hz To 21 KHz +/ -3 DB
- Voice Coil Size: 1.25”
- Dual 1” Teteron Tweeters
- Bridge-mounted Stereo Imaging
- 8” Two-Way Ceiling-Mount High-Definition Loudspeaker
- Frequency Response: 48Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power: 10 To 160 Watts
- 8” IMPACT Woofer Cone
- 1” Nano-coated IMPACT Pivoting Dome Tweeter
- Butyl Rubber Surround
MSRP $300.00
MSRP $275.00
NCB8C (CONSTRUCTION BRACKET)
NCB8C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
Updated: September 6, 2016
2
CEILING MOUNT SPEAKERS
CM8PR (EACH)
CM8MP (EACH)
- 8” Two-Way Ceiling-Mount Performance
Loudspeaker
- Frequency Response: 48Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power:
10 To 140 Watts
- Integrated Woofer/baffle Design
- Glass Fiber Woofer Cone
- 1” Fluid-cooled Teteron® Pivoting
Dome Tweeter
- 8” Two-Way Ceiling-Mount Multi-Purpose
Loudspeaker
- Frequency Response: 50Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power:
10 To 140 Watts
- Integrated Woofer/baffle Design
- Polypropylene Cone
- 1” Fluid-cooled UltraSilk® Soft-dome
Pivoting Tweeter
MSRP $225.00
MSRP $175.00
NCB8C (CONSTRUCTION BRACKET)
NCB8C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
CM7FX (PAIR)
CM7HD (EACH)
- 7” 2-Way Surround Effects Ceiling-Mount
Loudspeaker
- Frequency Response: 52Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power:
10 To 140 Watts
- Integrated Woofer/baffle Design
- Glass Fiber Woofer Cone
- Dual 1” Pivoting Fluid-cooled Teteron®
Dome Tweeters
- 7” Two-Way Ceiling-Mount High-Definition
Loudspeaker
- Frequency Response: 48Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power:
10 To 160 Watts
- Integrated Woofer/baffle Design
- Interlaced Glass Fiber Cone
- 1” Nano-coated IMPACT Pivoting Dome Tweeter
MSRP $350.00
MSRP $255.00
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
CM7SD (EACH)
CM7PR (EACH)
CM7MP (EACH)
- 7” 2-way Shallow Depth Ceiling-Mount Loudspeaker
- Frequency Response: 52Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power: 10 To 100 Watts
- 7” Mineral-Filled Polypropylene Woofer Cone
- Butyl Rubber Cone Surround
- 3/4” Soft Dome Tweeter
- 7” Two-Way Ceiling-Mount Performance Loudspeaker
- Frequency Response: 52Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power: 10 To 130 Watts
- Integrated Woofer/baffle Design
- Glass Fiber Woofer Cone
- 7” Two-Way Ceiling-Mount Multi-Purpose Loudspeaker
- Frequency Response: 55Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power: 10 To 130 Watts
- Integrated Woofer/baffle Design
- Glass Fiber Woofer Cone
MSRP $225.00
MSRP $200.00
MSRP $170.00
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
MSRP $50.00
MSRP $50.00
MSRP $50.00
Updated: September 6, 2016
3
CEILING MOUNT SPEAKERS
CM7SI (EACH)
CM7BG (EACH)
CM610 (PAIR)
- 7” Two-Way 2-Way Stereo Input Ceiling-Mount
Loudspeaker
- Frequency Response: 55Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power: 10 To 130 Watt
- 7” Glass Fiber Woofer Cone With A
Curvilinear Profile
- Glass Fiber Dual Voice Coil Woofer
- 7” 2-Way Background Loudspeaker
- Recommended Amplifier Power: 10 To 75 Watts
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Frequency Response: 58Hz To 20kHz +/-3dB
- Voice Coil Size: 3/4”
- Integrated Woofer/baffle Design
- Polypropylene Cone
- 6” Two-Way Loudspeaker
- Frequency Response: 65Hz to 20kHz +/-4dB
- Impedance: 8 Ohm Nom; 6 Ohm Min
- Recommended Amplifier Power: 5-50W
- Polypropylene Cone
- Treated Urethane Surround
- 13mm Kaladex® Tweeter
- Includes Both Flush-Mount Aluminum Grille
and Recessed Cloth Grille
MSRP $150.00
MSRP $115.00
MSRP $180.00
NCB7C (CONSTRUCTION BRACKET)
NCB7C (CONSTRUCTION BRACKET)
CM600BKT (PRE-CONSTRUCTION)
MSRP $50.00
MSRP $50.00
MSRP $40.00
CM630 (PAIR)
CM4PR (EACH)
CC65
- 6” Two-Way Loudspeaker with Pivoting
Tweeter
- Frequency Response: 65Hz to 20kHz +/-3dB
- Impedance: 8 Ohm Nom; 6 Ohm Min
- Recommended Amplifier Power: 10-75W
- Polypropylene Cone
- Butyl Rubber Surround
- 1” Joystick Type, UltraSilk® Soft-Dome Tweeter
- Includes Both Flush-Mount Aluminum Grille
and Recessed Cloth Grille
- 4” 2-way Ceiling-Mount Performance
Loudspeaker
- Frequency Response: 70Hz To 21kHz +/-3dB
- Impedance: 8 Ohm Nominal; 6 Ohm Minimum
- Recommended Amplifier Power:
25 To 100 Watts
- Custom Rear Wave Enclosure
- Mineral-Filled Polypropylene Cone
- Butyl Rubber Surround
- 1” Fluid-cooled Teteron® Dome Tweeter
- Sold as a Pair, mounting cutout: 8 inches
in diameter
- 9 1/4” overall diameter x 3 3/8”
deep,impendance: 8 OHMS
- Frequency Response:
-55Hz to 20 KHz +/-4DB
- 2 3/4 inches deep when installes on
1/2” drywall
- Woofer:6.5 inch talc-filled polypropylene
- Woofer with a urethane surround
MSRP $235.00
MSRP $ 285.00
MSRP $115.00
CM600BKT (PRE-CONSTRUCTION)
NCB4C (CONSTRUCTION BRACKET)
MSRP $40.00
MSRP $50.00
SG4C (SQUARE GRILLE)
MSRP $74.95
Updated: September 6, 2016
4
IN-WALL SPEAKERS
MP5R (PAIR)
HD5R (PAIR)
MP6R (PAIR)
- 5 1/4” 2-Way MP Multipurpose In-wall Loudspeaker
- Impedance: 8 Ohms
- Recommended Amplifier Power: 5-60W
- Frequency Response: 75Hz to 20kHz +/-3dB
- Sensitivity: 87dB for 2.83V Pink Noise
- 5-1/4” Talc-Filled Polypropylene Cone
- Treated Foam Cone Surround
- 3/4” Kaladex® Fluid-Cooling Dome Tweeter
- 5 1/4” 2-Way HD High Definition
In-wall Loudspeaker
- Impedance: 6 Ohms
- Recommended Amplifier Power: 10-100W
- Frequency Response: 60Hz to 21kHz +/-3dB
- Sensitivity: 88dB for 2.83V Pink Noise
- 5-1/4” Injection-Molded TCC Polypropylene Cone
- Butyl Rubber Cone Surround
- 1” Tri-laminate Teteron Fluid-Cooling
Dome Tweeter
- 6 1/2” 2-Way MP Multipurpose In-wall
Loudspeaker
- Impedance: 8 Ohms
- Recommended Amplifier Power: 10-75W
- Frequency Response: 66Hz to 20kHz +/-3dB
- Sensitivity: 88dB for 2.83V Pink Noise
- 6-1/2” Talc-Filled Polypropylene Cone
- Treated Foam Cone Surround
- 3/4” Kaladex® Fluid-Cooling Dome Tweeter
MSRP $260.00
MSRP $460.00
MSRP $310.00
MP6 (REQUIRES BRACKETS)
MSRP $309.95
PR6R (PAIR) (W/ BRACKETS)
HD6R (PAIR) (W/ BRACKETS)
HD8R (PAIR) (W/ BRACKETS)
- 6 1/2” 2-Way PR Performance In-wall
Loudspeaker
- Impedance: 8 Ohms
- Recommended Amplifier Power: 10-100W
- Frequency Response: 60Hz to 20kHz +/-3dB
- Sensitivity: 89dB for 2.83V Pink Noise
- 6-1/2” Talc-Filled Polypropylene Cone
- Butyl Rubber Cone Surround
- 3/4” Kaladex® Fluid-Cooling Dome Tweeter
- 6 1/2” 2-Way HD High Definition In-wall
Loudspeaker
- Impedance: 6 Ohms
- Recommended Amplifier Power: 10-125W
- Frequency Response: 50Hz to 21kHz +/-3dB
- Sensitivity: 89dB for 2.83V Pink Noise
- 6-1/2” Injection-Molded TCC
Polypropylene Cone
- Butyl Rubber Cone Surround
- 8” 2-Way HD High Definition In-wall
Loudspeaker
- Impedance: 6 Ohms
- Recommended Amplifier Power: 10-150W
- Frequency Response: 50Hz to 21kHz +/-3dB
- Sensitivity: 89dB for 2.83V Pink Noise
- 8” Injection-Molded TCC Polypropylene Cone
- Butyl Rubber Cone Surround
- 1” Tri-laminate Teteron Fluid-Cooling Dome
Tweeter
MSRP $410.00
MSRP $510.00
MSRP $670.00
6 SERIES BRACKET KIT
HD8 (REQUIRES BRACKETS)
MSRP $55.00
MSRP $669.95
8 SERIES BRACKET KIT
MSRP $60.00
Updated: September 6, 2016
5
IN-WALL SPEAKERS
HDFX (PAIR)
HDLCR (EACH)
HDLCRBX (EACH)
- High Definition, Side/Rear Channel Effects, In-wall
- Impedance: 8 ohms
- Recommended Amplifier Power: 10-150W
- Frequency Response: 66Hz to 21kHz +/-3dB
- Sensitivity: 88dB for 2.83V Pink Noise
- 5-1/4” Injection-Molded TCC™
- Dual 2-1/4” Injection-Molded TCC™
- 1” Teteron Fluid-Cooling Dome Tweeter
- Includes Paintable, Textured, Pearl White
ABS Frame and Microperf™ Aluminum Grille
- High Definition, Left/Center/Right Channel
In-wall
- Impedance: 4 ohms
- Recommended Amplifier Power: 10-150W
- Frequency Response: 66Hz to 21kHz +/-3dB
- Sensitivity: 88dB for 2.83V Pink Noise
- Dual 5-1/4” Injection-Molded TCC™
Polypropelene Woofer
- 1” Teteron Fluid-Cooling Dome Tweeter
- Includes Paintable, Textured, Pearl White
ABS Frame and Microperf™ Aluminum Grille
- High Definition, Left/Center/Right Channel
Bookshelf
- Impedance: 4 ohms
- Recommended Amplifier Power: 10-150W
- Frequency Response: 66Hz to 21kHz +/-3dB
- Sensitivity: 89dB for 2.83V Pink Noise
- Dual 5-1/4” Injection-Molded TCC™
Polypropelene Woofer
- 1” Teteron Fluid-Cooling Dome Tweeter
- Sculpted Microperf™ Aluminum Grille
MSRP $780.00
MSRP $340.00
MSRP $470.00
LCR/FX BRACKET KIT
LCR/FX BRACKET KIT
MSRP $40.00
MSRP $40.00
SUBWOOFERS
SW6.5
SW8
- Long-throw, Front Firing-woofer: 6.5”
- Dual, Long-throw, Side-mounted Passive
Radiators: 6.5”
- Amplifier Power (Dynamic): 800w
- Amplifier Power (RMS): 200w
- Frequency Range: 42-200 Hz
- Wireless Ready
- CAT5 Wiring Ready
- Long-throw, Front Firing-woofer: 8”
- Dual, Long-throw, Side-mounted Passive
Radiators: 8”
- Amplifier Power (Dynamic): 1200w
- Amplifier Power (RMS): 300w
- Frequency Range: 36-200 Hz
- Wireless Ready
- CAT5 Wiring Ready
MSRP $625.00
MSRP $750.00
SW-R
SW-T
- Wireless Subwoofer Receiver
- Transmits wireless audio to SW6.5 and SW8 powered subwoofers
- One SW-T transmitter can be used with up to four SW-R receivers
simultaneously
- Convenient one-button pairing
- Wireless Subwoofer Transmitter
- Wireless receiver for use with the SW-T wireless subwoofer
transmitter
- Up to four SW-R receivers can be used simultaneously with one
SW-T transmitter to create a multiple wireless subwoofer system
receiver plugs into a dedicated port on the back of SW6.5 and SW8
powered subwoofers
- Convenient one-button pairing
MSRP $145.00
MSRP $145.00
Updated: September 6, 2016
6
AURIEL MULTI-ROOM AUDIO CONTROL
NTP7-W (WHITE)
NTP7-B (BLACK)
NTP4-W (WHITE)
NTP4-B (BLACK)
- Compatible with Niles MRC-6430
multi-room control & amplifier systems
- 7” in-wall color LCD touchscreen
shows source, volume, metadata,
and system information for all zones
- Controls power, source selection,
playback, volume, bass, treble, & balance
- 16:9 widescreen design with 800 x 480 resolution integrated camera,
speaker, and microphone
- Nearfield focus wideangle color camera with MJPEG IP-CCTV output
- Displays MJPEG and H.264 video codecs from IP CCTV cameras
- 4.7-inch diagonal viewable area
LCD touchscreen interface
- Contemporary, sleek industrial design
- Edge-to-edge glass
- Capacitive sense touchscreen
- Proximity sensor to wake from sleep without touching as hand approaches
- Supports TCP/IP communication
- Mounts into drywall, brick, stone, plaster, and wood, using a standard 1g
US or UK junction box
- Portrait or landscape mounting
- Plug and play operation with Niles Auriel Software
- Locally powered (optional)
- Available in white and black bezel
MSRP $1,055.00
NEW
FOR
‘16
MSRP $630.00
NKP7
MRC-6430 - 6 RCA stereo inputs for
connecting source components
- 6 RCA stereo preamp outputs
for Zones 1-6 (switchable fixed/variable)
- 4 sets of removable speaker terminals W/ 4 screw-down connections for
speaker wire (up to 14 AWG)
- 30 watts RMS per channel x 8 into 8 ohms
- 45 watts RMS per channel x 8 into 4 ohms
- THD: less than 0.1% (1 watt output into 8 ohms)
- RJ-45 Ethernet port connects network router using CAT-5 or CAT-5e cable
MSRP $2,100.00
- In-wall keypad for Niles MRC-6430
multi-room control &
amplifier systems
- 4 preset keys for source selection,
off, and volume up/down LED
back lighting
- Communicates w/ the MRC-6430
through a wired connection to your network router
- PoE for single-wire hookup connections: LAN/ PoE RJ-45
- Installs in wall with a standard single-gang electrical box (not included)
- Standard Decora-style cover-plate recommended (not included)
MSRP $210.00
NKP7BK-LA (LIGHT ALMOND)
NKP7BK-B (BLACK)
Color change kit - 16 buttons and a bezel
MSRP $32.00
NHR200
- Designed for the Niles MRC-6430
multi-room controller amplifier system
- Operates with both IR and Wi-Fi® signals
- 2.4” touchscreen LCD
- 46 backlit tactile buttons including
transport functions found on most audio/
video equipment such as DVD players,
satellite, cable boxes, & DVRs
- Controls audio/video sources with
metadata feedback for supported devices
- Built-in accelerometer automatically
activates LCD or button backlighting
when remote is picked up, for more
convenient operation
- Quick and easy programming via Niles
Auriel Wizard software, USB connection
MSRP $1,000.00
Updated: September 6, 2016
7
IN-WALL SOUNDBARS
CSF48P
FEATURES
- 48” Passive Soundbar System
- In-wall soundbar that installs
flush below any flat panel TV
Mounting System
- Self Contained Sealed Spaeker
Modules Cleverly Tuck Down &
Into The Wall For Outstanding
Performance In Limited Space
- Magnetically Attached Paintable
MicroPerf Grille Provides A Nearly
Invisible Look.
- The Passive CSF-48P Does Not
Include An Amplifier Module,
Allowing Integrators To Utilize
Any Form Of Amplification.
CSF48A
SPECIFICATIONS
Loudspeaker Module
- Dimensions: 9-5/8” L X 4” D X
6-1/2” H (24.4cm L X 10.2cm D X
16.5cm H)
- Wiring: Impedance- Nominal 6Ω
- Sensitivty: 86 DB, 1kHz @ 1W/1m
- Max SPL: 105dB (LCR System)
- Frequency Response: 65Hz - 25kHz
- Power Handling Capability:
100 Watts
MSRP $499.95
MSRP $499.95
Updated: September 6, 2016
SPECIFICATIONS
Loudspeaker Module
- Dimensions: 9-5/8” L X 4” D X
6-1/2” H (24.4cm L X 10.2cm D X
16.5cm H)
- Wiring: Impedance- Nominal 6Ω
- Sensitivty: 86 DB, 1kHz @ 1W/1m
- Max SPL: 105dB (LCR System)
- Frequency Response: 65Hz - 25kHz
- Power Handling Capability:
100 Watts
MSRP $499.95
CSF55A
FEATURES
- 55” Active Soundbar System
- In-wall soundbar that installs
flush below any flat panel TV
- DC Power Supply Mounted
Separately Sends Low Voltage
DC Power Through Wall To
Amplifier Module
- Mounting System Allows For Ideal
Placement Of LCR Speakers
- Easily Connect Wireless Subwoofer
Utilizing Nile SW-T Transmitter &
SW-R Wireless Receiver.
- Simply Connect a Distributed Audio
System & It Is Automatically Selected
When The TV Is Powered OFF.
- TV Sound Always Takes Priority
When The TV Is Turned ON, Even
When The Whole House Audio Is ON
FEATURES
- 48” Active Soundbar System
- DC Power Supply Mounted
Separately Sends Low Voltage
DC Power Through Wall To
Amplifier Module
- Mounting System Allows For
Ideal Placement Of LCR Speakers
- Easily Connect Wireless Subwoofer
Utilizing Nile SW-T Transmitter &
SW-R Wireless Receiver.
- Simply Connect A Distributed Audio
System & It Is Automatically Selected
When The TV Is Powered OFF.
- TV Sound Always Takes Priority
When The TV Is Turned ON, Even
When The Whole House Audio Is ON
CSF65A
SPECIFICATIONS
Loudspeaker Module
- Dimensions: 9-5/8” L X 4” D X
6-1/2” H (24.4cm L X 10.2cm D X
16.5cm H)
- Wiring: Impedance- Nominal 6Ω
- Sensitivty: 86 DB, 1kHz @ 1W/1m
- Max SPL: 105dB (LCR System)
- Frequency Response: 65Hz - 25kHz
- Power Handling Capability:
100 Watts
FEATURES
- 65” Active Soundbar System
- In-wall soundbar that installs
flush below any flat panel TV
- DC Power Supply Mounted
Separately Sends Low Voltage
DC Power Through Wall To
Amplifier Module
- Mounting System Allows For Ideal
Placement Of LCR Speakers
- Easily Connect Wireless Subwoofer
Utilizing Nile SW-T Transmitter &
SW-R Wireless Receiver.
- Simply Connect A Distributed Audio
System & It Is Automatically Selected
When The TV Is Powered OFF
- TV Sound Always Takes Priority
When The TV Is Turned ON, Even
When The Whole House Audio Is ON,
SPECIFICATIONS
Loudspeaker Module
- Dimensions: 9-5/8” L X 4” D X
6-1/2” H (24.4cm L X 10.2cm D X
16.5cm H)
- Wiring: Impedance- Nominal 6Ω
- Sensitivty: 86 DB, 1kHz @ 1W/1m
- Max SPL: 105dB (LCR System)
- Frequency Response: 65Hz - 25kHz
- Power Handling Capability:
100 Watts
MSRP $499.95
8
OS INDOOR/OUTDOOR SPEAKERS
OS6.5 BLACK (PAIR)
OS6.5 WHITE (PAIR)
OS6.3 BLACK (PAIR)
OS6.3 WHITE (PAIR)
OS6.3SI BLACK (EACH)
OS6.3SI WHITE (EACH)
- 6” Interlaced Carbon Fiber Cone
- High Performance Indoor/Outdoor
Loudspeaker
- Impedance: 8 ohm
- Recommended Amplifier Power: 5W to 125W
- Frequency Response: 70Hz – 23kHz +/-3dB
- Sensitivity: 90dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- Butyl Rubber Cone Surround
- 1” Tri-Laminate Teteron Dome
Fluid-Cooling Tweeter
- 6” Mica-Filler Polypropylene Cone
- High Performance Indoor/Outdoor
Loudspeaker
- Impedance: 8 ohm
- Recommended Amplifier Power: 5W to 125W
- Frequency Response: 75Hz – 21kHz +/-3dB
- Sensitivity: 90dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- Butyl Rubber Cone Surround
- 1” UltraSilk® Dome Fluid-Cooling Tweeter
- 6” Mica-Filler Polypropylene Cone
- High Performance Indoor/Outdoor
Loudspeaker
- Impedance: 4 Ohms or 8 ohms
- Recommended Amplifier Power: 5W to 125W
- Frequency Response: 75Hz – 21kHz +/-3dB
- Sensitivity: 90dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- Butyl Rubber Cone Surround
- Dual 1” UltraSilk® Dome Fluid-Cooling Tweeter
MSRP $540.00
MSRP $500.00
MSRP $400.00
OS7.5 BLACK (PAIR)
OS7.5 WHITE (PAIR)
OS7.3 BLACK (PAIR)
OS7.3 WHITE (PAIR)
OS5.5 BLACK (PAIR)
OS5.5 WHITE (PAIR)
- 7” Interlaced Carbon Fiber Cone
- High Performance Indoor/
Outdoor Loudspeaker
- Impedance: 8 ohm
- Recommended Amplifier Power: 5W to 150W
- Frequency Response: 60Hz – 23kHz +/-3dB
- Sensitivity: 91dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- Butyl Rubber Cone Surround
- 1” Tri-Laminate Teteron Dome Fliud
Cooling Tweeter
- 7” Mica-Filler Polypropylene Cone
- High Performance Indoor/Outdoor Loudspeaker
- Impedance: 8 ohm
- Recommended Amplifier Power: 5W to 150W
- Frequency Response: 65Hz – 21kHz +/-3dB
- Sensitivity: 91dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- Butyl Rubber Cone Surround
- 1” UltraSilk® Dome Fluid-Cooling Tweeter
- 5” Interlaced Carbon Fiber Cone
- High Performance Indoor/Outdoor
Loudspeaker
- Impedance: 8 ohm
- Recommended Amplifier Power: 5W to 100W
- Frequency Response: 95Hz – 23kHz +/-3dB
- Sensitivity: 90dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- Butyl Rubber Cone Surround
- 1” Tri-Laminate Teteron Dome
Fliud-Cooling Tweeter
MSRP $755.00
MSRP $630.00
MSRP $365.00
Updated: September 6, 2016
9
OS INDOOR/OUTDOOR SPEAKERS
OS5.3SI BLACK (EACH)
OS5.3SI WHITE (EACH)
OS5.3 BLACK (PAIR)
OS5.3 WHITE (PAIR)
- High Performance Indoor/Outdoor
Loudspeaker
- Impedance: 8 ohm
- Recommended Amplifier Power: 5W to 100W
- Frequency Response: 90Hz – 21kHz +/-3dB
- Sensitivity: 90dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- 5” Mica-Filler Polypropylene Cone
- Butyl Rubber Cone Surround
- 1” UltraSilk® Dome Fluid-Cooling Tweeter
- High Performance Indoor/Outdoor
Loudspeaker
- Impedance: 4 Ohms or 8 ohms
- Recommended Amplifier Power: 5W to 100W
- Frequency Response: 85Hz – 21kHz +/-3dB
- Sensitivity: 90dB for 2.83V Pink Noise
- Integrated Woofer/Baffle Assembly
- 5” Mica-Filler Polypropylene Cone
- Butyl Rubber Cone Surround
- Dual 1” UltraSilk® Dome Fluid-Cooling Tweeter
MSRP $290.00
MSRP $295.00
WEATHERPROOF ROCK SPEAKERS
RS5PRO CORAL
RS5PRO GRANITE,GRAY
RS5PRO SANDSTONE
RS5PRO SHALE BROWN
RS5PRO SPECKLED GRANITE
RS6PRO CORAL
RS6PRO GRANITE
RS6PRO SANDSTONE
RS6PRO SHALE BROWN
RS6PRO SPECKLED GRANITE
-Acoustic suspension design
- frequency response 85-20,000 Hz (±3dB)
- handles up to 100 watts
- sensitivity 89 dB
- 1/2” fluid-cooled Kaladex™ dome tweeter
- 5-1/4” TCC (talc, carbon and ceramic) injected woofer
- weatherproof enclosure
- rust-proof grilles
- 3-foot pre-attached burial-rated speaker cable
- security bracket included to protect against theft
- Dimensions: 9-7/8”W x 9-5/8”H x 8-1/2”D
- weight: 10.3 lbs.
- Sold individually
- Acoustic suspension design
- Frequency response 60-21,000 Hz
- Handles up to 150 watts
- Sensitivity 89 dB
- 8-ohm impedance
- 1” Teteron dome tweeter
- 6-1/2” TCC (talc, carbon and ceramic) injected polypropylene woofer
- Weatherproof enclosure
- Rust-proof aluminum grilles
- 3-foot pre-attached burial-rated speaker cable
- Security bracket and cable included to protect against theft
- Dimensions: 14”W x 12-3/8”H x 10-7/8”D
MSRP $240.00
MSRP $295.00
Updated: September 6, 2016
10
WEATHERPROOF ROCK SPEAKERS
RS6SIPRO CORAL WHITE
RS6SIPRO GRANITE
RS6SIPRO SANDSTONE
RS6SIPRO SHALE BROWN
RS6SIPRO SPECKLED GRANITE
RS8SIPRO CORAL
RS8SIPRO GRANITE
RS8SIPRO SANDSTONE
RS8SIPRO SHALE BROWN
RS8SIPRO SPECKLED GRANITE
- For use in stereo or mono mode
- Handles up to 150 watts
- Sensitivity 89 dB
- 8-ohm impedance
- Dual 1” Teteron dome tweeters
- Weatherproof enclosure
- Rust-proof aluminum grilles
- 3-foot pre-attached burial-rated speaker cable
- Security bracket included to protect against theft
- Dimensions: 13”W x 12-1/8”H x 10-3/4”D
- Weight: 19 lbs
- 6-1/2” TCC (talc, carbon and ceramic) injected polypropylene dual
- Frequency response 60-21,000 Hz (±3 dB)
- For use in stereo or mono mode
- Handles up to 200 watts
- Sensitivity 88 dB
- 8-ohm impedance
- Dual 1” Teteron dome tweeters
- Weatherproof enclosure
- Rust-proof aluminum grilles
- 3-foot pre-attached burial-rated speaker cable
- Security bracket included to protect against theft
- 19”W x 12-3/4”H x 15-5/8”D
- 8” TCC (talc, carbon and ceramic) injected polypropylene dual
- Frequency response 50-21,000 Hz (±3 dB)
- Weight: 27.9 lbs.
MSRP $470.00
MSRP $340.00
PLANTER SPEAKERS
PB6SIPRO TERRACOTTA
PB6SIPRO WEATHERED CONCRETE
PS6SIPRO TERRACOTTA
PS6SIPRO WEATHERED CONCRETE
- Stereo-input planter speaker
- 6.5” Dual Voice Coil Injection-molded TCC (talc, Carbon, And Ceramic)
Filled Polypropylene Woofer With Butyl Rubber Surround
- Dual 1” Fluid-cooled Tri-laminate Teteron
Tweeters Mounted At A Custom
Angle For Optimum Dispersion
- Weatherproof Design Ensures
Performance Outdoors
- Dual 3-foot Burial-rated Connection
Cables With Waterproof Wire-nuts To
Ensure Trouble Free Connection
- Impedance: 8 Ohm In One-speaker Stereo-input Mode Or
4 Ohm In Two-speaker Stereo Mode
- Recommended Amplifier Power: 10W To 100W
- Designed To Accommodate Live Plants
- Stereo-input planter speaker
- Designed to accommodate live plants
- Looks like a regular terracotta planter
- 6-1/2” polypropylene woofer
- Dual 1” custom-angled tweeters
- Handles up to 100 watts
- 19-1/2”W x 19-1/2”H x 19-1/2”D
- Weight: 35 pounds
- Stereo inputs allow one-speaker or two-speaker setups
- MicroPerf™ aluminum grille blends naturallyinto enclosure
- 8-ohm impedance (in single-speaker stereo mode)
- Dual 3-foot burial-rated connection cables with waterproof connectors
MSRP $450.00
MSRP $450.00
GARDEN SPEAKERS
GS4
GSS10
GSS70V 70V TRANSFORMER KIT
- Satellite Garden Speaker
- 4” Mineral-filled polypropylene woofer
- 1” Teteron® tweeter
- UV-resistant cables
- Waterproof wire-nuts
- 10” Outdoor In-Ground Subwoofer
- Constructed from industrial strength PVC
- Paintable port tube
- Frequencies from 25Hz to 110Hz
- Recommended burial depth of just 16”-18”
- 10” Outdoor In-Ground Subwoofer
- Constructed from industrial strength PVC
- Paintable port tube
- Frequencies from 25Hz to 110Hz
- Recommended burial depth of just 16”-18”
MSRP $450.00
MSRP $785.00
MSRP $170.00
Updated: September 6, 2016
11
AMPLIFIERS
SI-250
SI-2100
SI-2150
- 2-Channel Bridgable Power Amplifier
- Digital, High Current Bridgeable Stereo
Amplifier
- Auto Switching 110V-230V Power Supply
- 12-volt Control Out
- Removable Line Cord
- Two Year Limited Warranty
- Rack Mount Ears Included
- 2-Channel Bridgable Power Amplifier
- 100 Watts RMS Per Channel Into 8 Ohms (all
Channels Driven)
- 220 Watts RMS Per Channel Into 4 Ohms (all
Channels Driven)
- Channels Are Bridgeable To 400 Watts RMS
Into 8 Ohms
- Auto Switching 110V-230V Power Supply
- 2-Channel Bridgable Power Amplifier
- Digital, High Current Bridgeable Stereo
Amplifier
- 150 Watts RMS Per Channel Into 8 Ohms
(all Channels Driven)
- 270 Watts RMS Per Channel Into 4 Ohms
(all Channels Driven)
- Channels Are Bridgeable To 550 Watts RMS
Into 8 Ohms
MSRP $495.00
MSRP $660.00
MSRP $850.00
SI-1230 SERIES 2
SI-1650
- Fully Configurable 12-Channel Amplifier
- 30 Watts RMS Per Channel Into 8 Ohms (all Channels Driven)
- 40 Watts RMS Per Channel Into 4 Ohms (all Channels Driven)
- Adjacent Channels are Bridgable to 80W RMS Into 8 Ohms
(all Channels Driven)
- Switchable 110V-230V Power Supply
- Unique BusMatrix™ Selector Allows Each Channel To Select From 4 Options:
Left Bus, Right Bus, Left Plus Right Bus (summed Stereo),
Or The Channel’s Dedicated Input
- Fully Configurable 16-Channel Amplifier
- 50 Watts RMS Per Channel Into 8 Ohms
- 100 Watts RMS Per Channel Into 4 Ohms
- Auto Switching 110V-230V Power Supply
- High Power Mode Configures Amp To 8 Channels X 100W RMS Into 8 Ohms
- Unique Web Browser Configuration Allows Each Channel To Select From
Any Of 16 Inputs Or Combination Of Inputs
- IP Web-based Config. EQ Adjustment, Volume Level & High/low Pass Selection
MSRP $1,550.00
MSRP $3,600.00
Updated: September 6, 2016
12
AUTO SWITCHERS
ABS-1
AC-3
APC-2
- Speaker-Level A-B Switcher
- Replaces Manually Operated A-B Switches
- Audio Power Handling: 600W Per Channel
- Activated by Sensing The Presence Of An
Audio Signal
- Exclusive Adjustable Signal-detection Circuitry
Ensures Reliable Operation
- Spring-loaded Push Terminal Connections
- Adjustable Delay Back To Default
- Voltage-Triggered AC Power Strip
- Allows you to Add an Additional Keypad
- Three AC outlets
- AC-3 is Activated by 12 Volt DC Signal
- Requires 12 Volt DC Adapte
- 12 Volt Control Output for Activating
other Devices
- Current Sensing Outlet Switcher
- Three AC Outlets
- Activated By Current Sensing Outlet
Or 12Volt DC Signal
- 12Volt Control Output
- N.O. (normally Open) And N.C. (normally
Closed) Relay Contacts
MSRP $129.95
MSRP $225.00
MSRP $370.00
AVS-2
CS12V
DBI-2
- Line-Level A-B Switcher
- Replaces Manually Operated A/V A-B Switches
- Requires 12Volt DC Adapter
- 12Volt Control Output
- Not A Signal-sensing Switcher
- Premium Gold-plated Connectors
- Current Sensing 12 Volt Trigger
- Trigger Output Is A Constant 12VDC/ 200mA
- Compact Footprint
- No Programming
- Expandable
- Printed Circuit Board Design
- Integrated Mounting Wings
- Door Bell Interface
- Adds Convenience And Security To Any Niles
MultiZone System
- Native Support For Illuminated Doorbell Buttons
- Plays Doorbell Chimes Through MultiZone Systems
- Audio Paging Input - Connect The DBI-2 To
The Output Of A Telephone Paging System
- Chime And Audio Level Adjustments
MSRP $150.00
MSRP $235.00
MSRP $440.00
IS-12V
LS-1
SPK-1
- 1.25A 12VDC; Triggers Up To
Six Automated Switchers
- Light Sensor; Light-Triggered;
Adjustable Sensitivity
- Speaker Level A-B Switcher; 12V-Triggered
MSRP $35.00
MSRP $195.00
MSRP $180.00
Updated: September 6, 2016
13
CAT 5 BALUNS
C5-A2
C5-A2WM
C5-HDDAWM
- Run Stereo Audio Signals Over Long Distances
Using Cost-Effective CAT-5 Cable
- CAT-5 Connector
- Gold-Plated Color Coded RCA Stereo
Audio Jacks
- Passive Circuitry - Power Supply Not Required
- Component-Style Chassis
- Durable Metal Construction
- Universal Mounting Holes Accommodate
Vertical Or Horizontal Installation
- Wall Mount Stereo Audio Balun
- Run Line Level Stereo Audio Signals Over Long
Distances Using Cost-Effective CAT-5 Cable
- CAT-5 Connector
- Gold-Plated Color Coded RCA Stereo Audio
Jacks
- Passive Circuitry - Power Supply Not Required
- 1-Gang Decora® Style
- Decora® Wall Plate Included
- Wall Mount CAT-5 Component Video & Digital
Audio Balun
- Run Component Video And Digital Audio
Signals Over Long Distances Using
Cost-Effective CAT-5 Cable
- CAT-5 Connector
- Gold-Plated Color Coded RCA Jacks
- Passive Circuitry - Power Supply Not Required
- 1-Gang Decora® Style
- Decora® Wall Plate Included
MSRP $90.00
MSRP $90.00
MSRP $150.00
C5-HDMI R
C5-HDMI RWM
C5-HDMI T
- Receive Balun
- Receives HDMI Signals Over Long Distances
Using Cost-Effective CAT-5 Cable
- Shielded CAT-5 Connectors
- Uses Two Runs Of CAT-5 Cable
- HDMI Version 1.3 Compliant
- Requires External Power Supply
- Compatible With HDMI Resolutions of 480i
to 1080p and CAT-5 & CAT-6 UTP And STP
- CAT-5 Wall Mount HDMI Receive Balun
- Receives HDMI Signals Over Long Distances
- Shielded CAT-5 Connectors
- Uses Two Runs Of CAT-5 Cable
- HDMI Version 1.3 Compliant
- Requires External Power Supply
- 1-Gang Decora® Style
- Decora® Wall Plate Included
- Compatible With CAT-5 And CAT-6 UTP And
STP and HDMI Resolutions of 480i to 1080p
- Transmit Balun
- Transmits HDMI Signals Over Long Distances
Using Cost-Effective CAT-5 Cable
- Shielded CAT-5 Connectors
- Uses Two Runs Of CAT-5 Cable
- HDMI Version 1.3 Compliant
- Requires External Power Supply
- Compatible With CAT-5 & CAT-6 UTP And STP
and HDMI Resolutions from 480i to 1080p
MSRP $330.00
MSRP $295.00
MSRP $330.00
Updated: September 6, 2016
14
CAT 5 BALUNS
C5-HDMI TWM
- CAT-5 Wall Mount
HDMI Transmit Balun
- Transmits HDMI Signals
Over Long Distances
- Compatible w/ HDMI
Resolutions From
480i To 1080p
- Shielded CAT-5 Connectors
- Uses Two Runs Of CAT-5 Cable
- HDCP Compliant
- HDMI Version 1.3 Compliant
- Compatible With CAT-5 And CAT-6 UTP And STP
- Decora Wall Plate Included
MSRP $295.00
C5-V
C5-VA2
- CAT-5 Video Balun
- Run Composite Video Signals Over Long
Distances Using Cost-Effective CAT-5 Cable
- CAT-5 Connector
- Component-Style Chassis
- Universal Mounting Holes
- Gold-Plated Color Coded RCA Stereo Audio Jacks
- Passive Circuitry - Power Supply Not Required
- CAT-5 Video & Stereo Audio Balun
- Run Composite Video And Stereo Audio Signals
Over Long Distances - CAT-5 Connector
- Component-Style Chassis
- Universal Mounting Holes
- Gold-Plated Color Coded RCA Jacks
- Passive Circuitry - Power Supply Not Required
MSRP $60.00
MSRP $125.00
DISTRIBUTION AMPLIFIER & ACCESSORIES
AVDA-3
DPS-1
- Source Level Stereo Audio/Video
Distribution Amplifier
- One Stereo Audio Input & Three Stereo
Audio Outputs
- One Video Input & Three Video Outputs
- Audio/video Cascade Outputs
- Gold-plated RCA Connectors
- Amplifier/Speaker A-B Selector
- Plays Either Of Two Amplifiers Through
A Shared Pair Of Loudspeakers
- Power Handling: 350W Per Channel
- Tabletop Unit
- Connectors Accommodate Up To 14 GA Wire
MSRP $174.95
MSRP $150.00
SPEAKER SELECTORS
AB-2D WHITE
ABA-1D WHITE
- A, B or A+B Selector for
Two Pair of Speakers
- Power Handling: 350
Watts Per Channel RMS
- Connectors Accommodate
Up To 14-gauge Wire
- Removable Button And
Decora Insert
- A-B Selector for
Amplifiers or Speakers
- Power Handling: 350
Watts Per Channel RMS
- Connectors Accommodate
Up To 14-gauge Wire
- Removable Button And
Decora Insert
MSRP $80.00
MSRP $70.00
Updated: September 6, 2016
HPS-6
- Six-Pair High-Power Speaker Selector
- Power: 250W Per Channel RMS
- Protection Circuit Safeguards Receiver/Amplifier
- Individual Room On/off Selector Switches
- Removable Connectors Accommodate Up To
12-gauge Wire
- Nonskid Feet
MSRP $380.00
15
SPEAKER SELECTORS
HPS-4
MSA-10A
SMS-10
- Four-Pair High-Power Speaker Selector
- Power: 250W Per Channel RMS
- Protection Circuit Safeguards Receiver/
Amplifier
- Separate Left And Right Ground Paths
- Removable Connectors Accommodate Up To
12-gauge Wire
- Speaker Selection with Autoformer Impedance
Matching System
- Power Handling: 200 Watts Per Channel RMS
- Accommodates 10 Pairs Of Speakers
- Automatic Impedance Protection
- Removable Speaker Output Terminals
- Removable Amplifier Input Terminals
- Accommodates Ten Pairs of Speakers
- Power: 200W Per Channel RMS
- Adjustable Impedance To Match
Between 4, 6, Or 8 Ohm Protection
- Premium Autoformers
- Speaker Output Terminals
- Amplifier Input Terminal
MSRP $310.00
MSRP $799.95
MSRP $520.00
SS-4
SS-6
SSVC-6
- Four-Pair Speaker Selector
- Power: 100W Per Channel RMS, 200W Peak
- Protection Circuit Safeguards Receiver/
Amplifier
- Separate Left And Right Ground Paths
- Removable Connectors Accommodate Up To
14-gauge Wire
- Nonskid Feet
- Six-Pair Speaker Selector
- Power: 100W Per Channel RMS, 200W Peak
- Protection Circuit Safeguards Receiver/
Amplifier
- Separate Left And Right Ground Paths
- Removable Connectors Accommodate Up To
14-gauge Wire
- Nonskid Feet
- Six-Pair Speaker Selector with Volume Controls
- Power: 100W Per Channel RMS; 200Ws Peak
- Selectable Impedance Magnification For 1, 2,
3/4, 5/6 Pairs Of Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- Separate Left And Right Ground Paths
- Removable Screwless Connector
- Nonskid Feet
MSRP $180.00
MSRP $235.00
MSRP $620.00
SSVC-4
SSVC-2
- Four-Pair Speaker Selector with Volume Controls
- Power: 100W Per Channel RMS; 200Ws Peak
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of
Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- Separate Left And Right Ground Paths
- Removable Screwless Connector
- Nonskid Feet
- Two-pair Speaker Selector with Volume Controls
- Power: 100W Per Channel RMS; 200Ws Peak
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of
Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- Separate Left And Right Ground Paths
- Removable Screwless Connector
- Nonskid Feet
MSRP $510.00
MSRP $315.00
Updated: September 6, 2016
16
VOLUME CONTROLS
SVC100K
VCS100K
VCS50K
- Stereo Volume Control with Selectable
Impedance Magnification
- Power Handling: 100W Per Ch RMS 200W Peak
- Selectable Impedance Magnifying: 1X, 2X, 4X, 8X
- 12-step Control, 54dB Max Attenuation
- Removable Screwless Connectors
- Pop-free Switching
- Stereo Volume Control with Selectable
Impedance Magnification
- Power Handling: 100W Per ChRMS 200W Peak
- Selectable Impedance Magnifying: 1X, 2X, 4X, 8X
- 12-step Control, 54dB Max Attenuation
- Removable Screwless Connectors
- Pop-free Switching
- Stereo Volume Control
- Power Handling: 50W Per Ch RMS 100W Peak
- Selectable Impedance Magnifying: 1X, 2X, 4X, 8X
- 10-step Control, 54dB Max Attenuation
- Removable Screwless Connectors
- Pop-free Switching
- Requires 1-gang Electrical Box At Least 2-3/4” Deep
MSRP $170.00
MSRP $18.95
MSRP $80.00
TVC-1
WVC100K
- Tabletop Stereo Volume
Control with Selectable
Impedance Magnification
- Power Handling: 100W Per Ch
RMS 200W Peak
- Selectable Impedance
Magnifying: 1X, 2X, 4X, 8X
- 12-step Control, 54dB Max
Attenuation
- Removable Screwless
Connectors
- Pop-free Switching
- Weatherproof Stereo Volume
Control w/ Selectable
Impedance
- Power: 100W Per Channel RMS,
200W Peak
- Selectable Impedance
Magnifying 1X, 2X, 4X, 8X
- 12-step Control, 54dB
Maximum Attenuation
- Removable Screwless
Connectors Accommodate Up
To 14-gauge Wire
- Pop-free Switching Between
All Steps
MSRP $205.00
MSRP $125.00
WVC100E
VCSHUB8
- Weatherproof Stereo Volume Control with
Selectable Impedance
- Programmable Automatic Muting Circuit
- Built-in Speaker Relay
- Power: 100W Per Channel RMS; 200W Peak
- Selectable Impedance Magnifying: 1X, 2X, 4X, 8X
- 12-step Control, 54dB Maximum Attenuation
- Removable Screwless Connectors
- Pop-free Switching Between All Steps
- Reduces Wiring Clutter
- Designed To Mount In Standard (6” Center)
- Structured Wiring Cabinets; Snap-in Christmas
Tree Plugs Provided
- Slotted Wings Allow For Vertical And
Horizontal Mounting
- Removable Screwless Connectors
Accommodate Up To 14-gauge Wire
MSRP $155.00
MSRP $100.00
Updated: September 6, 2016
17
CONNECTING BLOCKS
MSU480
MSU140
MSU250
- IR Repeater System for Single Zone
Applications
- Four Sensor Input With Removable
Screwless Connectors
- Use With IRH610
- Eight Flasher Outputs With 3.5mm Flasher
Output Jacks
- Low Profile, Small Footprint
- Integrated Mounting Wings
- IR Repeater System for Single Zone
Applications
- One Sensor Input With Removable
Screwless Connectors
- Use With IRH610
- Four Flasher Outputs With 3.5mm Flasher
Output Jacks
- Low Profile, Small Footprint
- Integrated Mounting Wings
- System Feedback LED Indicator
- IR Repeater System for Single Zone
Applications
- Two Sensor Input With Removable
Screwless Connectors
- Use With IRH610
- Five Flasher Outputs With 3.5mm
Flasher Output Jacks
- Low Profile, Small Footprint
- Integrated Mounting Wings
MSRP $139.95
MSRP $95.00
MSRP $115.00
IRB1
MF1-NILES
MF1VF
- High-Output IR Flasher
- Controls An Entire Stack Of Audio/video
Components
- High-power Output
- Perfect For Mounting To The Inside Of A
Cabinet Door Or At The Top Of An
Equipment Rack
- Adhesive Backing
MSRP $15.00
MSRP $20.00
MF1U (BULK, 24 FLASHERS)
MF1VF BULK (24 FLASHERS)
EMITTERS
MSRP $40.00
MSRP $305.00
- IR MicroFlasher®
- Secure Adhesive Mounting
- One MF1 Required For Each Component
- Transparent To Infrared Light
- Low Profile, Extremely Small Footprint
- 10’ Cable With 3.5mm Plug
MF2
- Dual IR MicroFlasher®
- Transparent to Infrared Light
- Dual Flashers on a Single Cable
- Low Profile, Extremely Small Footprint
- 10’ Cable With 3.5mm Plug
- Includes Improved Elastomer Style
Blocking Cover
MSRP $30.00
Updated: September 6, 2016
MSRP $305.00
- Visual Feedback
- Transparent To Infrared Light
- Secure Adhesive Mounting
- Flashback LED On Flasher
- Low Profile, Extremely Small Footprint
- 10’ Cable With 3.5mm Plugs
MF2VF
- Dual IR MicroFlasher with Visible Feedback
- 10’ Cable With 3.5mm Plugs For Easy Installation
- Dual Flashers On A Single Cable Expand The Flasher
Output Capabilities Of Main System Units
- Flashback LED On Flasher Provides Visual
Confirmation Of Operation
- Low Profile, Extremely Small Footprint
- Transparent To Infrared Light
- Secure Adhesive Mounting
MSRP $35.00
18
KITS
RCA-HT2 BLACK
RCA-SM2 BLACK
RCA-TT2
- Remote Control Anywhere!® Kit for Home
Theater Application
- One MS220 LCD Surface-mount IR
MicroSensor
- One MSU250 IR Main System Unit
- Five MF1VF MicroFlashers
- 50’ Of Category 5 Wire Included
- Features UL-listed Regulated In-line
Power Supply
- Remote Control Anywhere!® Kit with Surface
Mount Sensor
- One MS220 LCD Surface-mount IR
MicroSensor
- One MSU140 IR Main System Unit
- Three MF1 MicroFlashers
- 50’ Of Category 5 Wire Included
- Features UL-listed Regulated In-line
Power Supply
- Remote Control Anywhere!® Kit w/ Table
Top Sensor
- One TS120 LCD Table-top Sensor
- One MSU140 IR Main System Unit
- Three MF1 Flashers
- 50’ Of Category 5 Wire Included
- Features UL-listed Regulated In-line
Power Supply
MSRP $375.00
MSRP $330.00
MSRP $300.00
IR RECIEVERS
MS120
MS220 BLACK
- Flush-Mount IR MicroSensor®
- High Fidelity Wideband Design
- Universal Noise Supression
- Receiving Range Typically 20’ To 35’
- Includes 10’ of Connecting Wire
- Includes Black & White Bezels
- 1/2” Diameter x 2-7/8” H
- Surface-Mount IR MicroSensor®
- High Fidelity Wideband Design•
- Universal Noise Supression
- Receiving Range Typically 20’ To 35’
- Bi-color Visible Feedback
- Includes 10’ of Connecting Wire
- Secure Adhesive Backing
MSRP $180.00
MSRP $165.00
WS120 WHITE
TS120
- Tabletop IR Sensor
- High Fidelity Wideband Design
- Universal Noise Supression
- Receiving Range Typically 20’ To 35’
- Bi-color Visible Feedback
- Small Footprint
- 2-7/8” W x 1-1/16” H x 3-1/8” D
- Wall-Mount IR Sensor
- Universal Noise Supression
- Receiving Range Typically 20’ To 35’
- Bi-color Visible Feedback
- White Decora Plate
- Fits Into a Single Gang Box
- 2-3/4” W x 4-1/2” H x 1-1/4” D
MSRP $155.00
MSRP $129.95
PARTS
CN00014
CN00403B
LA01021ACN
- Connector Female Strip ,4 Positive ,2 PC
- Connector 5MM, 4POS, MARKED L+/L-/R-/R+, BL
- LABEL, SHEET FOR ZONES
MSRP N/A
MSRP N/A
MSRP N/A
Updated: September 6, 2016
19