OpenGL Settings: Checking this will improve the performance for full
Transcription
OpenGL Settings: Checking this will improve the performance for full
GA-620 Series Graphics Accelerator OpenGL Settings: Checking this will improve the performance for full-screen applications. Save a tweak file for a OpenGL setting and revoke easily without setting again. 3-13 Software Installation 3-14 GA-620 Series Graphics Accelerator Options : Please leave all these item unchecked for higher performance. The sliders allow you to overclock the graphics processor’ s Engine Clock and Memory Clock. Check this to enable Gigabyte display icon on task bar. M If the system hangs after the new clock settings are applied, please use the display recovery utility to restore the hardware default. Please refer to the detail on p3-18. Check this to automatically apply the desired clocking at system startup. 3-15 Software Installation Display : Select “ Device Setting” 3-16 button for screen adjustment. GA-620 Series Graphics Accelerator Color : Use sliders for the monitor color adjustment. Information: 3-17 Software Installation 3.1.6 Taskbar Icon Window Adjust Display Properties. Select the Gigabyte icon. DirectX properties Adapter information 3-18 Gigabyte graphic properties for 3D setting , display device , color correction and other options. GA-620 Series Graphics Accelerator Gigabyte Display Recovery : This utility is used to restore hardware clock default settings. If the system hang after new clock are applied, please restart you computer, enter Windows “ Gigabyte Display Recovery ” (Press F5 during Windows booting sequence ) and use the display recovery utility to restore the default hardware clock setting. 3-19 Software Installation Select the button to restore the hardware clock defaults. 3-20 GA-620 Series Graphics Accelerator 3.2 WINDOWS NT 4.0 DRIVER INSTALLATION Please make sure the Windows NT 4.0 have installed Windows NT 4.0 Service Pack version 3.0 before installing the GA-620/622 graphics accelerator driver. 1. Boot Windows NT, then select “Windows NT Workstation Version 4.0 [VGA mode]”. 2. When NT finishes loading, press your mouse right button in Windows NT wallpaper area. 3. Then select the “Properties” item. 4. Select the “Settings” Item. 5. Select the “Display Type” button, and press the “Change” button. 6. Click on “Have Disk” and insert the GA-620/622 driver CD into your CDROM driver. 7. Type in D:\Winnt40 (if your CD in Driver D:), and click “OK”. 8. A list “GIGABYTE GA-620/622” is appeared in a window, select it and click “OK”. 9. A window “Installing Driver” appears, click “OK” and close the Display Properties to restart the system. 10. When the system restart, the default settings are temporarily being used by the system. After the Display applet appears, click “OK” and modify the settings you want. 3-21 Software Installation 3.3 BIOS FLASH UTILITY GA-620/622 BIOS update procedure: ü It is recommended you copy the GA6Flash.exe, DOS4GW.exe and the BIOS binary files in driver CD(D:\>Utility\BIOSFlash) into the same directory in your hard disk. ¡ i i.e:C:\>Utility\ (C: denotes the driver where you put the flash utilities and BIOS file0 in.)¡ j ü Restart your computer into MS-DOS mode or command prompt only for Win95/98, go into the directory where the new BIOS file are located ü Use the utility GA6Flash.exe (DOS4GW.exe is required to run this program) to update the VGA BIOS. ü Type the following command once you have enter the directory where all the files are located C:\utility\ GA6Flash <filename of the BIOS binary file intended for flashing> ü Once the process is finished, reboot the system MNote: Please download the newest BIOS from our web site (www.gigabyte.com.tw) or contact your local dealer for the file. 3.4 REMOVE GA-620/622 DRIVER Please use the “ Uninstall GA-620/622 Driver” to completely remove the driver from hard disk. 3-22 Game’ s Keyboard Command Reference 4. Game’s Keyboard Command Reference Need for Speed III NOTICE Electronic Arts reserves the right to make improvements in the product described in this manual at any time and without notice. This manual and the software described in this manual are copyrighted. All rights are reserved. No part of this manual or the described software may be copied, reproduced, translated, or reduced to any electronic medium or machine-readable form without the prior written consent of Electronic Arts, P.O. Box 9025, Redwood City, California 94065-9025, Attn :Customer Support.This product and Aston Martin DB7 are used under license from Aston Martin Lagonda Limited.Certain photographs Neill Bruce. Chevrolet, Corvette, Emblems and Vehicle Model Body designs are General Motors Trademarks used under license to Electronic Arts Inc. Some Images 1997 (and 1978)GM Corp. Used with permission GM Media Archives. ” Mercedes” , “ Mercedes-Benz” , “ CLK” and “ SL” are trademarks of Daimler-Benz AG. Mercedes-Benz car images are used with permission of Daimler-Benz AG. Ferrari, Ferrari 355 FI Spider, Ferrari 550 Maranello, Ferrari 456M GT, all associated logos, and the Ferrari 355 FI Spider, Ferrari 550 Maranello, and Ferrari 456M GT distinctive designs are trademarks of Ferrari S.p.A Scighera, ITALDESIGN, and all associated logos are trademarks of ITALDESIGN S.p.A. Some images of the Scighera 1998 ITALDESIGN S.p.A. All rights reserved. The word “ Jaguar” and the leaping cat device are trademarks of JAGUAR CARS LTD, ENGLAND and are used under license. Automobili Lamborghini, Diablo SV, Countach 25th and all associated logos are trademarks of Automobili Lamborghini S.p.A. Lister, Storm , and Lister Storm are Trademarks of LISTER. Some images of the Lister Storm 1998 LISTER. All rights reserved. Spectre , Spectre R42 and Spectre R45 are trademarks of SPECTRE Holdings Ltd. Some images of the Spectre R42 and the Spectre R45 1998 SPECTRE Holdings Ltd. All rights reserved. The Holden Special Vehicles name and the Lion and Helmet logo are registered trademarks of Holden Limited ACN 000 893 232 FORD, FORD FALCON GT AND ALL ASSOCIATED TRADEMARKS USED UNDER UCENSE FROM FORD MOTOR COMPANY. Need for Speed, Electronic Arts, and the Electronic Arts logo are trademarks or registered trademarks of Electronic Arts in the U.S. and/or other countries. All rights reserved. All music 1998 Electronic Arts Music Publishing, Inc.(ASCAP) Software and documentation 1998 Electronic Arts. All rights reserved. WARNING : it is a violation of Federal Copyright Law to synchronize this MULTIMEDIA DISK with video tape or film, or to print this MULTIME DIA DISK in the form of standard music notation without the express written permission of the copyright owner. 4-1 GA-620 Series Graphics Accelerator 4.1 NEED FOR SPEED III Note : If you want to driver with an analog steering or a game controller, access the controllers menu for default controls. Default Driver Controls-Single Player Race : Action Keyboard Accelerate ¡ ô Steer left/right ¡ ö /¡ ÷ Brake ¡ õ Handbrake Spacebar Shift up/down A/Z Cycle driving views C Horn; siren (pursuit car) H Reset car R Lay spike strip (pursuit car) S Lights On/Off /High beams L Look behind B 4-2 Game’ s Keyboard Command Reference Additional Game Controls : Action Keyboard Pause / resume race Esc Hide / reveal pause Menu F1 Pan pause camera Left / Right F2 / F4 Stop / resume Pause Camera Rotation F3 Toggle On-screen gauges F5 Toggle On-screen gauges (Player 2) F6 Toggle rearview mirror F7 Toggle music F8 Toggle sound FX F9 Reduce / expand windows F11/F12 Cycle map option Tab Zoom map In/Out + / - (Keypad) 4-3 GA-620 Series Graphics Accelerator 4.2 POPULOUS : THE BEGINNING Action Keyboard In-game Menu Esc Pause P Encyclopaedia F1 World View Enter Skip Flyby Spacebar Level status S Commandee Toggle-see Commandee Toggle Encyclopaedia section for more details L Zoom to Shaman . Zoom to Reincarnation Site H Zoom In / Out +/- Adjust game speed Shift + / Shift - Quick Load - Press Y to confirm or N to cancel F8 Quick Save -- Press Y to confirm or N to cancel F9 Chat (multi-player only) M 4-4 Game’ s Keyboard Command Reference Navigation : Action Keyboard Scroll forward / backward ¡ ô /¡ õ Scroll left / right Ctrl ¡ ö / Ctrl ¡ ÷ Rotate left / right ¡ ö /¡ ÷ Move Mouse to edge of screen Right Mouse Button(on any object) Scroll left / right / up /down Query Allocate selected Followers to command group Shift + 1, 2, 3, 4, 5, 6 Select command group 1, 2, 3, 4, 5, 6 Select multiple command groups(original command groups still preserved) Ctrl + 1, 2, 3, 4, 5, 6 Zoom to and select command group Alt + 1, 2, 3, 4, 5, 6 Set camera points Shift + Z, X, C, V Zoom to camera points Z, X, C, V Track Follower last commanded Track Angel of Death 4-5 GA-620 Series Graphics Accelerator 4-6 Game’ s Keyboard Command Reference Followers and the followers panel : Action Keyboard Add Follower to selected group (even after giving group commands) Ctrl + Left Mouse Button (with selected Followers) Shift + Left Mouse Button (with selected followers) Alt + Left Mouse Button (with selected Followers) Ctrl + Left Mouse Button (on Followers) Select previous group Shift + Backspace Guard Shaman G (with select Followers) Multiple commands (up to eight) Force command Toggle Autoselect for this one command Stop Followers guarding around Shaman Create multiple patrol point (up to eight) Similar to selecting guard fires Select Follower Select 5 Follower Select all follower Release guarding Follower. See Guard Post Encyclopaedia section for more details 4-7 G (without any select Followers) Ctrl Alt (with selected Followers) Left Mouse Button(on Follower) Ctrl +Left Mouse Button (on Follower Panel icon) Shift +Left Mouse Button (on Follower Panel icon) N GA-620 Series Graphics Accelerator 4-8 Game’ s Keyboard Command Reference Spells and the spells panel : Action Keyboard Cast spell multiple times Toggle Autocast with this one command Toggle on/off that spell Toggle on/off that spell Toggle on/off all spells except for the one selected Ctrl + Left Mouse Button (with spell selected) Alt + Left Mouse Button (with spell selected) Right Mouse Button (on spell icon) Ctrl + Right Mouse Button (on spell icon) Shift + Right Mouse Button (on spell icon) Buildings and the buildings panel : Action Keyboard Ctrl + Left Mouse Button (with spell selected) Shift + Right Mouse Button (on Plan/Guard Post) Place down multiple Plans Delete Plan /Guard Post /Swamp Rotate building Plan/Zoom to Guard Tower with alarm Force one Follower from building Send one selected Followers to nearest Buildings for the type selected Backspace Shift + Left Mouse Button (on a building) Shift +Left Mouse Button (with selected Followers on building icon) Vehicles : Action Keyboard Left Mouse Button (with selected Followers) Shift + Left Mouse Button (on plan / vehicle) Enter vehicle Force one Follower from vehicle 4-9 GA-620 Series Graphics Accelerator Other : Action Keyboard Ally with play in multi-play (other player must Shift + Left Mouse Button also do the same on your icon) (on an Enemy Tribes Icon) Left Mouse Button (on Read Pop –up Icon and zoom to target Pop-up Icon) Shift + Right Mouse Button Delete Pop-up Icon (on Pop-up Icon) Bring up the last pop up message received 4-10 Backspace Game’ s Keyboard Command Reference 4-11 GA-620 Series Graphics Accelerator 4.3 SUPERBIKE : WORLD CHAMPIONSHIP MENU CONTROLS : Action Keyboard Mouse Option ¡ ö ¡ ÷ Move mouse cursor Option ↑↓ Mouse left button Preview page/exit ESC − Next page ENTER − Action Joystick Keyboard Accelerate ⇑ ↑ Brake ⇓ ↓ Left / right steer ⇐/⇒ ←/→ Shift up/down 0/1 A/Z Sit up 2 X Look behind 3 Pause ESC DEFAULT RACING CONTROLS : 4-12 ESC Game’ s Keyboard Command Reference 4.4 FUTURE COP : L.A.P.D. Walker¡ E Actions Keyboard Jog¡ E Forward/Backward Num.8/Num.5 Rotate¡ E Left/Right Num.4/Num.6 Fire¡ E Gun Spacebar Fire¡ E Heavy¡ E Weapon Alt Fire¡ E Special¡ E Weapon Ctrl Jump Z Action Num.2 Change¡ E Target Num.0 Jink¡ E Left/Right Num.7/Num.9 Transform¡ E to¡ E Hovercar Num.0+Num.2 Walk¡ E forward/Backward Num.0+Num.8/Num.5 Crouch Num.0+Z Short¡ E Jink¡ E Left/Right Num.0+Num.7/Num.9 Map¡ E Key M Camera¡ E Key Tab 4-13 GA-620 Series Graphics Accelerator Hovercar¡ E Actions Keyboard Jog¡ E Forward/Backward Num.8/Num.5 Rotate¡ E Left/Right Num.4/Num.6 Fire¡ E Gun Spacebar Fire¡ E Heavy¡ E Weapon Alt Fire¡ E Special¡ E Weapon Ctrl Brake Z Action Num.2 Change¡ E Target Num.0 Jink¡ E Left/Right Num.7/Num.9 Transform¡ E to¡ E Walker Num.0+Num.2 Map¡ E Key M Camera¡ E Key Tab 4-14 GA-620 Series Graphics Accelerator APPENDIX A: Resolutions and Color Depth Table 2D VIDEO (MODES GA-622) Resolution Color Depth 640x400 8/16/32 640x400 8/16/32 800x600 8/16/32 960x720 8/16/32 1024x768 8/16/32 1152X864 8/16/32 1028X1024 8/16/32 1600X1200 8/16/32 1920X1080 8/16/32 1920X1200 8/16/32 Max.refresh rate 240 240 240 200 200 150 120 85 75 75 2D VIDEO (MODES GA-620) Resolution Color Depth 640x400 8/16/32 640x400 8/16/32 800x600 8/16/32 960x720 8/16/32 1024x768 8/16/32 1152X864 8/16/32 1028X1024 8/16/32 1600X1200 8/16/32 1920X1080 8/16/32 1920X1200 8/16 Max.refresh rate 240 240 240 200 200 150 120 85 75 75 A-1 GA-620 Series Graphics Accelerator 4-2 DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) FCC Compliance Statement: This equipment has been tested and found to Responsible Party Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: VAG Card comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in Model Number: GA-620 Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: residential installations. generates, uses, and This can equipment radiate radio This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. frequency energy, and if not installed and used Representative Person's Name: in accordance with the instructions, may cause Signature: Date: ERIC LU Eric Lu July 22, 1999 harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Move the equipment away from the receiver -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio/television technician for additional suggestions You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment. This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) VAG Card GA-620 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM high frequency equipment EN 61000-3-2* EN60555-2 Disturbances in supply systems caused by household appliances and similar electrical equipment “Harmonics” EN55013 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment EN61000-3-3* EN60555-3 Disturbances in supply systems caused by household appliances and similar electrical equipment “Voltage fluctuations” EN 55014 Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar electrical apparatus EN 50081-1 Generic emission standard Part 1: Residual, commercial and light industry EN 50082-1 Generic immunity standard Part 1: Residual, commercial and light industry EN 55015 Limits and methods of measurement of radio disturbance characteristics of fluorescent lamps and luminaries EN 55081-2 Generic emission standard Part 2: Industrial environment EN 55020 Immunity from radio interference of broadcast receivers and associated equipment EN 55082-2 Generic immunity standard Part 2: Industrial environment EN 55022 Limits and methods of measurement of radio disturbance characteristics of information technology equipment ENV 55104 Immunity requirements for household appliances tools and similar apparatus DIN VDE 0855 part 10 part 12 Cabled distribution systems; Equipment for receiving and/or distribution EN 50091- 2 EMC requirement uninterruptible power systems (UPS) CE marking The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC Safety requirements for mains operated electronic and related apparatus for EN 60335 EN 60950 Safety of household and similar electrical app including electrical business equipment General and Safety requirements for uninterruptible power systems (UPS) Manufacturer/Importer Signature : (Stamp) Date : July 22, 1999 Name : Rex Rex Lin Lin DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) FCC Compliance Statement: This equipment has been tested and found to Responsible Party Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: VAG Card comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in Model Number: GA-622 Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: residential installations. generates, uses, and This can equipment radiate radio This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. frequency energy, and if not installed and used Representative Person's Name: in accordance with the instructions, may cause Signature: Date: ERIC LU Eric Lu July 30, 1999 harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Move the equipment away from the receiver -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio/television technician for additional suggestions You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment. This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) VAG Card GA-622 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM high frequency equipment EN 61000-3-2* EN60555-2 Disturbances in supply systems caused by household appliances and similar electrical equipment “Harmonics” EN55013 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment EN61000-3-3* EN60555-3 Disturbances in supply systems caused by household appliances and similar electrical equipment “Voltage fluctuations” EN 55014 Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar electrical apparatus EN 50081-1 Generic emission standard Part 1: Residual, commercial and light industry EN 50082-1 Generic immunity standard Part 1: Residual, commercial and light industry EN 55015 Limits and methods of measurement of radio disturbance characteristics of fluorescent lamps and luminaries EN 55081-2 Generic emission standard Part 2: Industrial environment EN 55020 Immunity from radio interference of broadcast receivers and associated equipment EN 55082-2 Generic immunity standard Part 2: Industrial environment EN 55022 Limits and methods of measurement of radio disturbance characteristics of information technology equipment ENV 55104 Immunity requirements for household appliances tools and similar apparatus DIN VDE 0855 part 10 part 12 Cabled distribution systems; Equipment for receiving and/or distribution from sound and television signals EN 50091- 2 EMC requirements for uninterruptible power systems (UPS) CE marking (EC conformity marking) The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC EN 60065 Safety requirements for mains operated electronic and related apparatus for household and similar general use EN 60950 Safety for information technology equipment including electrical business equipment EN 60335 Safety of household and similar electrical appliances EN 50091-1 General and Safety requirements for uninterruptible power systems (UPS) Manufacturer/Importer Signature : (Stamp) Date : July 30, 1999 Name : Rex Rex Lin Lin