Temperature Controlled Lead-free Soldering Station

Category
Lead-Free Soldering Stations
Search
Category
Surface Mount
Technology
Lead-Free Soldering
Stations
Temperature
Controlled Soldering
Stations
Ceramic Heater
Soldering Irons
Nichrome Heater
Soldering Irons
Special Purpose
Soldering Irons
Solder Pots/ PCB
Assembly Aids
Desoldering
Soldering Accessories
Heated Tools
Hand Tools/ Tool Sets
Replacement TIP
Product Specifications
Preheating is achieved as Nitrogen is output from the nozzle surrounding the heater
pipe. Using Nitrogen reduces oxidization and improves solder wetting and fillet shape.
NOTE Preheat effect cannot be achieved using the RX-802ASPH alone. A Nitrogen gas
cylinder or Nitrogen generator (available separately) is also required. We recommend using
the NC-100R N2 Station to control gas flow.
All-in-one N2 Nozzle Tips
RX-80HRT series tips fitted with slim N2 nozzles. No need to
select nozzles for individual tips.
Slim N2 Nozzles
Ø6.4mm slim N2 nozzles. Get into small spaces easily.
Temperature Controlled Lead-free Soldering Station
Taiyo Electric Ind. Co.,
Ltd. is certified to
comply to the regulations
within the ISO9001
:2008, JIS Q 9001 :2008
set by the accreditation
organisation Tüv
Rheinland.
Light and easy to use Handpiece
Handpiece weighs just 33g. So light it's hard to believe for a Nitrogen station!
Flexible N2 Induction Tubing
Extra-thin Ø1.8mm N2 induction tubing. Super-flexible that doesn't inhibit handling of
handpiece.
Special Tool to change tip easily
RX-802ASPH comes with a special tool to change the tip easily even when it's hot.
Improving lead-free soldering
Advantages of the
Preheat Effect
•Allows soldering
work to be done
with a tip
temperature similar
to that for Eutectic
solder (Sn-Pb),
even though leadfree solder has a
high melting point
temperature.
•Enables quicker soldering because there is minimal temperature fluctuation during
soldering work.
•Reduces solder splashing or damage caused by heat-shocks during soldering by
preheating the components or the solder itself.
Advantages of Preheating with Nitrogen
•Reduces oxidization of the solder joint area and the tip.
•Improves the solder wetting and fillet shape.
RX-802ASPH + NC100R Temperature Controlled Lead-free Soldering Station
Setup example
RX-802ASPH+NC-100R
A space-saving and efficient N2 system
Specifications
MODEL
RX-852AS
Voltage
110V,120V,220V,230V,240V AC 50/60Hz
Power Consumption
80W
Soldering Unit Voltage/Consumption
24V 72W
Temperature Setting Range
50-450°C
Insulation Resistance(500V DC)
Over 100MΩ
Dimensions
Weight
Soldering
158mm ( w/o cord bushing )
Control Unit
146(L) x 115(W) x 98(H) (mm)
Soldering
33g (w/o cord)
Control Unit
1.8kg(w/o cord)
Leak Voltage
Less than 2mV
Gound Resistance
Less than 2Ω
Control Unit to Soldering Unit Cord Lenth
1.2m
Gas Supply Pressure
0.2MPa(2kgf/cm2)
Power Cord Length
1.2m (3 core cord) ground plug
Accessories
Soldering Iron Stand, Tip Stand, Tip changing tool
Replacement Parts
Temperature Controlled Lead-free Soldering Station
N2 O-ring
Temperature Controlled Lead-free Soldering Station
RX-80PHP
ST-20 Replacement sponge
ST-53SP
Tip/O-ring changing tool
RX-80PHC
Soldering Unit Hand Piece
RX-80GASPH
Tip Stand
ST-20C
Copyright ©2011 TAIYO ELECTRIC IND.CO.,LTD. All rights
reserved.