SOLDERING/DESOLDERING/SMD REWORK Lead Free Soldering

Comments

Transcription

SOLDERING/DESOLDERING/SMD REWORK Lead Free Soldering
SOLDERING/DESOLDERING/SMD REWORK
AUTOTEK 936/937/942 RohS Temp. Controlled soldering station
Specifications
Model
Autotek 936
Autotek937
Autotek942
Temp. Range
200-480degc
200-450
degc
Working Voltage
230V/50Hz single phase AC
PowerConsumption
60watt
80watt
Heater
Ceramic Heater(24Volts)
Tip to ground resistance
Under 2 ohms
Tip to ground Voltage
Under 2 Mv
Temp Lock Mode
Manual
with card
ESD Safe Design
Yes
Auto sleep mode
NO
Yes
Lead Free Soldering Stations
Specifications:
Product name: Intelligent lead-free soldering station
Brand: SMTechnology
Model:X1- X5
Power consumption: X1 80watt , X2 100watt, X3 130Watt X5 160W
Temperature stable: ±1℃ ( No Load)
Output voltage: 24V
Resistance between tips: Below 2Ω
The potential between tips: Below 2mV
Package dimension: 35*27*17.5CM
G.W:3.5 KGS to 5.5KGS
Temp Controlled Soldering Stations
s
Model -SMT Q1 with WSD 80 Iron
Specifications:
* Product name: Q1 intelligent soldering station
* Model No. : Q1
* Brand: SMTechnology
* Power consumption: 80W
* Temperature control range:150~450°C
* Temperature stable: ±1°C
* Output voltage: 24V
* Resistance between tips: Below 2Ω
* The potential between tips: Below 2mV
* Pacakge dimension: 35*27*17.5CM
* G.W: 3.2KGS
Soldering Stations Model KS-951 Lead free soldering
Station from Kingsom
KS-951 Soldering Station
Model Name
Part Number
Power Consumption
Temperature Range
Temperature Stability
Temperature Accuracy
KS-951
FX951-66
75W 120V
200° - 450°C (400° - 840°F)
±5°C (±9°F)
±15°C (±27°F)
Station
Output Voltage
Outer Dimensions
Weight
24V
80(W) x 130(H) x 131(D) mm
(3.1 x 5.1 x 5.1 in.)
1.2 kg (2.6 lb.)
Soldering Iron (FM-2027)
Power Consumption
70W (24V)
Tip-to-Ground
Resistance
< 2 ohms
Tip-to-Ground Potential
< 2mV
Total Length (w/o cord)
188 mm (7.4 in.) with 2.4D tip
Weight
(w/o cord)
Cord Length
30g (0.067 lb./1.07 oz.) with 2.4D
tip
1.2m (47 in.)
IroIron design changed from as shown in the Picture.
T-12 series Tips
Hot Air Rework Stations
Various models of SMD Rework Station-- KS853BFR-801
Hot air Rework stations Various Models
SpecificationsWorking Volateg-230V/50Hz
Temp Range-100-500 ° C
Air flow- 5-23 lit /min
DESOLDERING STATION FOR PTH
SPECIFICATIONS-Model KS201B
* ESD Safe by design, It prevents PCBs from being damaged by static electricity and
leak current.
* Powerful built-in Vacuum Pump import from Japan.
* Sensor close-loop temperature control for heating system, Precise temperature.
* Heater which is 36V powered is fully isolated from mains. Safe and reliable.
* Temperature calibrates digitally; Digital display.
* Easy to calibration temperature by digitally.
* Long life time for heater.
* Suitable for lead free soldering.
Specifications -Model KINGSOM KS-201B
Pump Power 12V/2A
Heating Power 90W
Temperature 200-450
Pump Diaphragm
Vacuum Pressure 600 mmHg
Tip to Ground Resistance < 2Ω
Tip to Ground Potential < 2mV
Auto Sleeping Yes
Replacement Nozzle A1004 : ID 0.8/ OD 2.3, A1005 : ID 1.0/ OD 2.5, A1006 : ID
1.3 /OD 3.0
Dimension / Weight 105(L) x 250(W) x 165(H) mm / 4kg
Various Nozzles( Optional
ESD MATERIALS TSTERSS AND CLEANROOM
CONSUMABLES
ESD Cleanroom Consumables
WRSIT BAND
EESD TWEEZERS
APRONS
ESD BRUSHES
ESD PU DOTTED /COATED
ANTISTATIC 2LAYER/3LAYER MAT
STICKY MAT
EESD TESTERS
Surface Resistivity Meter
Wrist Strap Monitor
COMBO-TESTER
SOLDERING THERMOMETER
FG-100
TAPE CUTTING MACHINES----
ELECTRIC SCREWDRIVES
TTKS1500/2500
Screwdrivers
Brushless DC Screwdriver
CL-4000 with power supply CLT 50
ES
Conos
Sudong Brand Electric Screwdrivers with Semiautomatic and DC
Brushless fully automatic Screwdrivers Series.
Automatic Liquid /Paste/glue dispenser
Model A6 Digital Automatic glue dispenser
Auto Set Time For 0.01 ~ 30 Sec.
Timing Artificial sustained pedal (line painting) or Single-touch plastic tap
Minimum Note Volume Drops 0.01 ml.
Repeat Accuracy 0.5%
Input Barometric Pressure 0.25 ~ 7 bar (35 ~ 100 psi)
Input Barometric Pressure 0.1 ~ 5.5 bar (1 ~ 78 psi)
Input Voltage 220V or 110V (can select at back side)
Dimension / Weight 235 mm x 225 mm x 633 mm / 2.2 kg.
Performance
* precision glue-dripping machine uses air pressure within
set time to push out liquid, using a timer to control each
dripping time. If the air pressure and time are well adjusted
and the nozzles are properly chosen, it can easily change
each dripping volume. It has extensive uses, and applicable
liquids include non-drying adhesive, red glue, yellow glue,
epoxy resin, silica gel, lubricants, screw-tightening glue,
anti-soldering solvent or tin paste and so on. The full set of
products is available, provided with straight-type steel pipe
nozzle and sharp-type plastic needle nozzle to make full use
of the machine functions
EESD Consumables and Clean Room Products—
ESD Slippers
ESD Brushes
Wrist Bands
Finger Cots
Heal Straps
ESesdESD Gloves
ESD tweezers
V Vacuum Pen
Wipes
Solder Tip Cleaner
00
Soldering Spare PartsSoldering Tips900-M Series
900-L series
200 –Series
LT-Series
T-12 Series
Mobile Phone Repair Tools Brochure (2011-2012)
SMD Rework Station Model 853BESD Safe By Design
Unit Price Rs.10,000/Each
Model Fr-801 Lead free SMD rework station
Rs16,000/Each+taxes
Lead Free Soldering Station Model KS-951 With Integrated Tips
Unit Price RS 10,000/Each
Other Repairs accessories
Magnifying [email protected] Rs.4000/Each
ESD Glove @ Rs.80/-Each
Wrsit Band @ Rs. 100/Each
IPA Dispenser Bottle @ Rs325/Each
Wick Can @ Rs 800/Can
Apron @ Rs 450/Each
ESD Mat @Rs60/Sqft( 45/sqft Ex works office)
Screwdriver Set of 4 bits T-5 t-6 and PH00 and [email protected] Rs 400/Set
Flux Pen @ Rs 320/Pen
Normal Soldering Station Model Autotek-936 @ Rs 4000/Each
Model Atten 850B Unit price Rs 5000/Each
ESD Brush
Unit Price Rs 60/Each
ESD Tweezers(metal)
BENT /STRAIGHT
75/EACHwith ESD coating
50EACH WITOUT COATING
SRT MOBILE OPENER of 10pcs
175/pkt of 10 pcs
LCD Screen cleaner wipes Size 4inchx 4inch and 9inch x9 inch
Unit price
850/PKT/300/1200pcs
.
Clean Room Tacky mat
30 leaves /mat size 3feetx2 feet
Rs650/each
PWB Metal fixture Rs1800/Each
Power supply – Autonix 30V-2ampDigital
Unit best price 4300/each
Please Contact
Please place your order in favour of
Harsha Technologies Private Limited
D-251/10, First Floor,
Laxmi Nagar, Vikas Marg,
Delhi-110092
Mail [email protected]
Delivery Ex Stock.
Delivery- EX
stock -4-5
weeks or Ex
stock ( Please
Check)
Payment-100%
against
delivery/Advan
ce
Warranty, The
all equipments
are warranted
for one Year
from the date
of Invoice.
CST-12.5% or
2% against
form C
Our CST/TIN
no07220396208
Looking
forward to
your kind
order soon.
Rgds Manoj Jain
Managing Director
98100-16336
We can offer you the spares parts for all our soldering stations and other
equipments
Please feel free to contact us as per the details Below

Similar documents

N2 Soldering Iron (Iron holder with a sleep mode)

N2 Soldering Iron (Iron holder with a sleep mode) Thank you for purchasing the FM-2026 soldering iron. The FM-2026 soldering iron is designed to supply hot gas to the soldering area. This can increase soldering efficiency, as the gas pre-heats the...

More information