Bore Gages

Bore Gages
SERIES 526 — for Extra Small Holes
FEATURES
These Bore Gages measure diameters
of small holes. The radial displacement
of split-ball contact is converted to axial
displacement of measuring rod, which is
shown on the dial indicator.
• Optional stand (215-120M) is available for
efficient measurement of multiple small
holes.
Technical Data
Accuracy: 4µm
Repeatability: 2µm
Graduation: 0.01mm, 0.001mm, .0005 or .00001"
Contact Point
�
�����
�����
�����
�������������
Optional Accessory
——— : Setting ring (See page 122.)
215-120M: Bore gage stand
526-172
526-127
SPECIFICATIONS
Metric
Inch
Order No.
526-172*
526-162*
526-152*
526-124
526-125
526-173*
526-163*
526-153*
526-126
526-127
Range
0.95 - 1.55mm
1.5 - 4mm
3.7 - 7.3mm
7 - 10mm
10 - 18mm
0.95 - 1.55mm
1.5 - 4mm
3.7 - 7.3mm
7 - 10mm
10 - 18mm
Probe depth (D)
11.5mm
17.5, 22.5mm
32mm
56mm
62mm
11.5mm
17.5, 22.5mm
32mm
56mm
62mm
Range
.037" - .061"
.06" - .155"
.145" - .29"
.3" - .4"
.4" - .7"
.3" - .4"
.4" - .7"
Order No.
526-176*
526-166*
526-156*
526-122
526-123
526-119
526-120
Probe depth (D)
.45"
.68", .88"
1.25"
2.2"
2.4"
2.2"
2.4"
*Provided with setting rings
.0001” graduation
(w/ 2923SB-10)
.0005” graduation
(w/ 2922SB)
*Provided with setting rings
0.001mm graduation
(w/ 2109SB-10)
0.01mm graduation
(w/ 2046SB)
DIMENSION
����
� ���
Unit: mm
��
����
��
������������
����������
�����������
���������
��
�������
�����
����
�
�
���
�
����
��
��
��
������
���������
�����
�������
�����
��
�
���
����������
��
�
112
�
�������
Bore Gages
SERIES 511 — for Small Holes
FEATURES
Technical Data
Accuracy: 5µm
Repeatability: 2µm
Graduation: 0.01mm, 0.001mm, .0005 or .0001"
• Its interchangeable anvils are made of
alloyed steel.
• The dial indicator is fully protected by a
rugged cover.
Contact Point
6 - 10mm
10 - 18.5mm
Optional Accessory
Setting ring (See page 122.)
511-204
SPECIFICATIONS
Metric
Inch
Range
6 - 10mm
10 - 18.5mm
6 - 10mm
10 - 18.5mm
Order No.
511-210
511-203
511-211
511-204
Probe depth
50mm
100mm
50mm
100mm
0.001mm graduation
(w/ 2109SB-10)
Range
.24" - .4"
.4" - .74"
.24" - .4"
.4" - .74"
0.01mm graduation
(w/ 2046SB)
Order No.
511-212
511-206
511-213
511-207
.0001” graduation
(w/ 2923SB-10)
Probe depth
2"
4"
2"
4"
.0005” graduation
(w/ 2922SB)
DIMENSION
Unit: mm
�
��
��
��
��
������������������
����������������
��
���
�����
���
���
�����
��������������������
��
�
——— :
�����������������������
�������������
��������������
113
Bore Gages
SERIES 511
Mitutoyo offers a complete selection of Bore
Gages, all of them with interchangeable
anvils and necessary accessories to perform
close tolerance ID measurements.
FEATURES
Technical Data
• Most popular Bore Gages.
• Carbide-tipped contact points for
durability.
• The dial indicator is fully protected by a
rugged cover.
• Optional extension rods can be attached
for measuring deep holes.
• Economy Bore Gage Sets are also available.
Accuracy: 5µm
Repeatability: 2µm
Graduation: 0.01mm, 0.001mm, .0005 or .0001"
Optional Accessory
953549:
953552:
953557:
953550:
953553:
952361:
953551:
953554:
953558:
953555:
953559:
953556:
953560:
125mm Extension rod for 18-35mm
(.7"-1.4") models
125mm Extension rod for 35-160mm
(1.4"-6.5") models
125mm Extension rod for 160-400mm
(6.5"-16") models
250mm Extension rod for 18-35mm
(.7"-1.4") models
250mm Extension rod for 35-160mm
(1.4"-6.5") models
250mm Extension rod for 160-400mm
(6.5"-16") models
500mm Extension rod for 18-35mm
(.7"-1.4") models
500mm Extension rod for 35-160mm
(1.4"-6.5") models
500mm Extension rod for 160-400mm
(6.5"-16") models
750mm Extension rod for 35-160mm
(1.4"-6.5") models
750mm Extension rod for 160-400mm
(6.5"-16") models
1000mm Extension rod for 35-160mm
(1.4"-6.5") models
1000mm Extension rod for 160-400mm
(6.5"-16") models
511-173
SPECIFICATIONS
Metric
Range
18 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
100 - 160mm
160 - 250mm
250 - 400mm
18 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
100 - 160mm
160 - 250mm
250 - 400mm
Metric
Range
18 - 150mm
18 - 150mm
Inch
Individual
Order No.
511-167
511-168
511-169
511-170
511-178
511-179
511-180
511-171
511-172
511-173
511-174
511-175
511-176
511-177
Probe depth
100mm
150mm
150mm
150mm
150mm
250mm
250mm
100mm
150mm
150mm
150mm
150mm
250mm
250mm
Range
.7" - 1.4"
1.4" - 2.5"
2" - 4"
2" - 6"
4" - 6.5"
6.5" - 10"
10" - 16"
.7" - 1.4"
1.4" - 2.5"
2" - 4"
2" - 6"
4" - 6.5"
6.5" - 10"
10" - 16"
Number of probes
3
3
Range
.7" - 6"
.7" - 6"
Inch
Bore Gage Sets
Order No.
511-902
511-901
0.001mm graduation
(w/ 2109SB-10)
0.01mm graduation
(w/ 2046SB)
Individual
Order No.
511-163
511-164
511-165
511-166
511-187
511-188
511-189
511-159
511-160
511-161
511-162
511-184
511-185
511-186
Bore Gage Sets
.0001” graduation
(w/ 2923SB-10)
114
Probe depth
4"
6"
6"
6"
6"
10"
10"
4"
6"
6"
6"
6"
10"
10"
Order No.
511-912
511-911
Number of probes
3
3
.0005” graduation
(w/ 2922SB)
——— :
Setting ring (See page 122.)
Contact Point
18 - 35mm
35 - 60mm
50 - 100mm
100 - 160mm
160 - 250mm
250 - 400mm
DIMENSION
���
���
����
����
�����
���������
Unit: mm
��
�����
���
������
���
���
��
�����
�
���
����������
�����
���
�
�
���
���������
����
���
�����
���
���
�����������
�����
��
��
�����
115
��
Bore Gages
SERIES 511 — Short Leg Type
FEATURES
• Compact and lightweight because of the
short length below the grip.
• Carbide-tipped contact point for durability.
Technical Data
Accuracy: 5µm
Repeatability: 2µm
Graduation: 0.01mm, 0.001mm, .0005 or .0001"
Contact Point
18 - 35mm
35 - 60mm
50 - 100mm
511-461
SPECIFICATIONS
50 - 150mm
Metric
Inch
Order No.
511-471
511-472
511-473
511-474
511-475
511-461
511-462
511-463
511-464
511-465
Range
18 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
100 - 160mm
18 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
100 - 160mm
0.001mm graduation
(w/ 2109SB-10)
Probe depth
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
Order No.
511-491
511-492
511-493
511-494
511-495
511-481
511-482
511-483
511-484
511-485
Range
.7" - 1.4"
1.4" - 2.5"
2" - 4"
2" - 6"
4" - 6.5"
.7" - 1.4"
1.4" - 2.5"
2" - 4"
2" - 6"
4" - 6.5"
0.01mm graduation
(w/ 2046SB)
.0001” graduation
(w/ 2923SB-10)
Probe depth
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
.0005” graduation
(w/ 2922SB)
DIMENSION
��
����
�����
Unit: mm
��
����
���������
���
���
������
�����
��
���
��
�
�
���
�
���������
����������
����������
�����������
���
�����
���
�����
116
Range
35 - 60mm
50 - 100mm
50 - 150mm
100 - 160mm
a
17.5
26
26
39
b
—
37.8
37.8
46.4
100 - 160mm
Optional Accessory
——— :
Setting ring (See page 122.)
Bore Gages
SERIES 511 — for Blind Holes
FEATURES
Technical Data
Accuracy: 5µm
Repeatability: 2µm
Graduation: 0.01mm, 0.001mm, .0005 or .0001"
• Can measure ID at position close to the
bottom of blind holes.
Contact Point
50 - 100mm, 50 - 150mm
�����
15 - 35mm
511-412
Optional Accessory
Setting ring (See page 122.)
SPECIFICATIONS
Metric
Inch
Range
15 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
15 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
Order No.
511-421
511-422
511-423
511-424
511-411
511-412
511-413
511-414
0.001mm graduation
(w/ 2109SB-10)
Probe depth
150mm
150mm
150mm
150mm
150mm
150mm
150mm
150mm
Order No.
511-441
511-442
511-443
511-444
511-431
511-432
511-433
511-434
Range
.6" - 1.4"
1.4" - 2.4"
2" - 4"
2" - 6"
.6" - 1.4"
1.4" - 2.4"
2" - 4"
2" - 6"
0.01mm graduation
(w/ 2046SB)
.0001” graduation
(w/ 2923SB-10)
Probe depth
6"
6"
6"
6"
6"
6"
6"
6"
.0005” graduation
(w/ 2922SB)
DIMENSION
Unit: mm
���
���
�
����
�����
���
�
——— :
��
Range
15 - 35mm
35 - 60mm
50 - 100mm
50 - 150mm
a
9.7
14.7
23.7
23.7
b
10
18
22
22
117
��
Bore Gages
SERIES 511 — with Micrometer Head
FEATURES
• Interchangeable anvil is attached to a
micrometer head for accurate dimensional
setting.
• Wide measuring range with sub-anvils.
• Carbide ball contact point for durability.
• Extension rods (optional) can be attached
for measuring deep holes.
• Optional Setting Rings offer the best
method of zero-setting Bore Gages.
Technical Data
Accuracy: 5µm
Repeatability: 2µm
Graduation: 0.01mm, 0.001mm, .0005 or .0001"
Optional Accessory
953549:
953552:
953557:
953550:
953553:
952361:
953551:
953554:
953558:
953555:
953559:
953556:
953560:
125mm Extension rod for 18-35mm
(.7"-1.4") models
125mm Extension rod for 35-160mm
(1.4"-6.5") models
125mm Extension rod for 160-400mm
(6.5"-16") models
250mm Extension rod for 18-35mm
(.7"-1.4") models
250mm Extension rod for 35-160mm
(1.4"-6.5") models
250mm Extension rod for 160-400mm
(6.5"-16") models
500mm Extension rod for 18-35mm
(.7"-1.4") models
500mm Extension rod for 35-160mm
(1.4"-6.5") models
500mm Extension rod for 160-400mm
(6.5"-16") models
750mm Extension rod for 35-160mm
(1.4"-6.5") models
750mm Extension rod for 160-400mm
(6.5"-16") models
1000mm Extension rod for 35-160mm
(1.4"-6.5") models
1000mm Extension rod for 160-400mm
(6.5"-16") models
511-334
SPECIFICATIONS
Inch
Metric
Range
35 - 60mm
60 - 100mm
100 - 160mm
150 - 250mm
250 - 400mm
400 - 600mm
600 - 800mm
35 - 60mm
60 - 100mm
100 - 160mm
150 - 250mm
250 - 400mm
400 - 600mm
600 - 800mm
Order No.
511-343
511-333
511-311
511-313
511-315
511-317
511-327
511-344
511-334
511-312
511-314
511-316
511-318
511-328
0.001mm graduation
(w/ 2109SB-10)
Range
1.4" - 2.5"
2.4" - 4""
4" - 6.4"
6" - 10"
10" - 16"
16" - 24"
24" - 32"
1.4" - 2.5"
2.4" - 4""
4" - 6.4"
6" - 10"
10" - 16"
16" - 24"
24" - 32"
Probe depth
150mm
150mm
150mm
250mm
250mm
250mm
250mm
150mm
150mm
150mm
250mm
250mm
250mm
250mm
0.01mm graduation
(w/ 2046SB)
.0001” graduation
(w/ 2923SB-10)
118
Order No.
511-346
511-336
511-326
511-320
511-322
511-324
511-330
511-345
511-335
511-325
511-319
511-321
511-323
511-329
Probe depth
6"
6"
6"
10"
10"
10"
10"
6"
6"
6"
10"
10"
10"
10"
.0005” graduation
(w/ 2922SB)
——— :
Setting ring (See page 122.)
Contact Point
35 - 60mm
60 - 100mm
100 - 160mm
150 - 250mm
250 - 400mm
400 - 600mm
600 - 800mm
DIMENSION
Unit: mm
�
�
��
�
�
�
�
��
�
�
���������
�
Range
30 - 60mm
60 - 100mm
100 - 160mm
150 - 250mm
250 - 400mm
400 - 600mm
600 - 800mm
a
150
150
150
250
250
250
250
b
105
105
105
124
124
124
124
c
SR8
SR8
SR10
SR10
SR10
SR10
SR10
119
d
11.9
26
39
60
88.5
200
300
e
SR0.75
SR1
SR1
SR1.5
SR1.5
SR1.5
SR1.5
f
6.5
9
9
13
13
16
16
g
—
37.8
46.4
78
89
120
120
h
—
ø12.8
ø12.8
ø19.8
ø19.8
ø19.8
ø19.8
i
ø8.7
ø12
ø12
ø15
ø15
ø15
ø15
ABSOLUTE Digimatic Bore Gage
SERIES 511
FEATURES
This ABSOLUTE Digimatic bore gages are
exclusively designed for ID measurement.
• The minimum value holding function
provides the easy of detection of hole
diameter.
(Refer to the page 9 for details.)
Technical Data
Resolution:
Display:
Battery:
Battery life:
0.001mm or .0005"/0.001mm
LCD
SR44 (1 pc.) (938882)
Approx. el: Conforming to IP53
Functions
• Up to three sets of master value and upper/
lower tolerance value can be memorized.
• An analog bar indicator is integrated to
enhance the intuition in reading.
• GO/±NG judgment is performed by setting
the upper and lower tolerances.
• Up to four rods (250mm or 500mm) can
be used.
Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm
conversion (inch/mm type only), Data output, GO/±NG
tolerance judgment
Alarm:
Low battery voltage, scale contamination, overflow error, tolerance limit setting error
Optional Accessory
21DZA089: Extension rod 250 mm (10")
21DZA081: Extension rod 500 mm (20")
516-118-10: Origin setup metric rectangular gauge block set
516-119-10: Origin setup metric square gauge block set
905338:
SPC cable (1m)
905409:
SPC cable (2m)
——— :
Setting ring (See page 122.)
511-521
SPECIFICATIONS
Metric
Inch/Metric
Order No.
511-501
511-502
Range
45 - 100mm
100 - 160mm
Probe depth
150mm
150mm
Range
1.8 - 4"
4 - 6.4"
Order No.
511-521
511-522
Probe depth
6"
6"
DIMENSION
Origin setup gauge block set
Unit: mm
����
����
���
�������
���������
�������������
���
���
��
��
��
���
��
���
���������
�������
����
���
���
���
����
���
����������������
�
���
Example:
using four extension rods.
�
�
���
120
Dial Bore Gages
SERIES 545 — Rugged, Production-Line Tools
FEATURES
• Carbide-tipped contact point for excellent
durability.
• Wide range of measurements with
interchangeable Anvil Extensions (screw-in
type).
• Carbide-tipped anvil is optional (901484).
• Two guide pins ensure high repeatability
of measurements.
• Easy zero adjustment because the Dial
Bore Gage can stand upright.
• Optional interchangeable rods provide a
variety of probe depths.
Technical Data
Graduation: 0.01mm, 0.001mm, .0005 or .0001"
Optional Accessory
901484:
901529:
901530:
901940:
901531:
901532:
901533:
Carbide-tipped anvil
Interchangeable rod (Probe depth: 85mm)
Interchangeable rod (Probe depth: 115mm)
Interchangeable rod (Probe depth: 150mm)
Interchangeable rod (Probe depth: 265mm)
Interchangeable rod (Probe depth: 315mm)
Interchangeable rod (Probe depth: 390mm)
545-105S
545-114S
SPECIFICATIONS
Metric
Inch
Order No.
545-114S
545-115S
545-116S
545-104S
545-105S
545-106S
Range
35 - 50mm
50 - 75mm
75 - 150mm
35 - 50mm
50 - 75mm
75 - 150mm
0.001mm graduation
Order No.
545-134S
545-135S
545-136S
545-124S
545-125S
545-126S
Range
1.475" - 2.075"
1.975" - 3.075"
2.975" - 6.075"
1.475" - 2.075"
1.975" - 3.075"
2.975" - 6.075"
0.01mm graduation
.0001" graduation
Probe depth
3.5"
4.5"
6"
3.5"
4.5"
6"
.0005" graduation
Setting ring (See page 122.)
DIMENSION
Unit: mm
�
�
���
���
���
�
�
�
�
——— :
Probe depth
85mm
115mm
150mm
85mm
115mm
150mm
�������������������
�����
Range
35 - 50mm
50 - 75mm
75 - 150mm
121
L
240
265
305
a
123
148
188
b
88
113
153
c
35
50
75
d
50
75
150
Setting Ring
SERIES 177 — Accessories for Inside Micrometers, Holtest and Dial Bore Gages
FEATURES
• Used for quick zero adjustment of dial bore
gages, Holtest, and inside micrometers.
• Actual inside diameter is marked on each
ring.
Technical Data
177-147
177-146
177-139
177-205
177-300
SPECIFICATION
Setting Rings
Metric
Size
1mm
1.1mm
1.2mm
1.3mm
1.4mm
1.75mm
2mm
2.25mm
2.5mm
2.75mm
3mm
3.25mm
3.5mm
3.75mm
4mm
4.5mm
5mm
5.5mm
6mm
6.5mm
7mm
8mm
10mm
12mm
14mm
Inch
Order No.
177-220
177-222
177-225
177-227
177-230
177-236
177-239
177-242
177-208
177-246
177-248
177-250
177-252
177-255
177-204
177-257
177-205
177-263
177-267
177-271
177-275
177-125
177-126
177-284
177-132
Accuracy
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
Size
16mm
17mm
20mm
25mm
30mm
35mm
40mm
45mm
50mm
60mm
62mm
70mm
75mm
80mm
87mm
90mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
275mm
300mm
Order No.
177-177
177-133
177-286
177-139
177-288
177-140
177-290
177-178
177-146
177-292
177-314
177-147
177-316
177-294
177-318
177-148
177-296
177-298
177-300
177-302
177-304
177-306
177-308
177-310
177-312
122
Accuracy
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
Size
.1"
.16"
.24"
.275"
.35"
.425"
.50"
.60"
.65"
.70"
.80"
1.0"
1.2"
1.4"
1.6"
1.8"
2.0"
2.4"
2.5"
2.8"
3.0"
3.2"
3.5"
3.6"
4.0"
5.0"
6.0"
7.0"
8.0"
9.0"
10.0"
11.0"
12.0"
Order No.
177-209
177-206
177-207
177-281
177-179
177-283
177-180
177-181
177-182
177-183
177-287
177-184
177-289
177-185
177-291
177-186
177-187
177-293
177-315
177-188
177-317
177-295
177-319
177-189
177-297
177-299
177-301
177-303
177-305
177-307
177-309
177-311
177-313
Accuracy
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00010"
±.00010"
±.00010"
±.00010"
±.00010"
±.00010"
±.00010"
±.00010"
Tolerance between the nominal size and the actual diameter:
±0.01mm for ø1 - 45mm setting rings
±0.02mm for ø50 - 300mm setting rings
±.0004" for .1" - 1.8" DIA. setting rings
±.0008" for 2" - 12" DIA. setting rings
Cylindricity: 1.0µm for ø1 - 60mm setting rings
1.5µm for ø62 - 90mm setting rings
2.0µm for ø100 - 150mm setting rings
2.5µm for ø175 - 225mm setting rings
3.0µm for ø250 - 300mm setting rings
.00004" for .1" - 2.4" DIA. setting rings
.00006" for 2.5" - 3.6" DIA. setting rings
.00008" for 4" - 6" DIA. setting rings
.00010" for 7" - 9" DIA. setting rings
.00012" for 10" - 12" DIA. setting rings
Ceramic Setting Ring
SERIES 177 — Accessories for Inside Micrometers, Holtest and Dial Bore Gages
FEATURES
• Ceramic Setting Rings are also available.
No more anticorrosion treatment is
required when handling Ceramic Setting
Rings normally, resulting in simple
maintenance and storage.
177-424
Technical Data
Tolerance between the nominal size and the actual diameter:
±0.01mm for ø1 - 45mm setting rings
±.0004" for .1" - 1.8" DIA. setting rings
Cylindricity: 1.0µm for ø1 - 45mm setting rings
.00004" for .1" - 1.8" DIA. setting rings
177-429
177-432
Ceramic Setting Rings
Metric
Size
4mm
6mm
8mm
10mm
12mm
16mm
20mm
25mm
30mm
35mm
40mm
45mm
Inch
Order No.
177-418
177-420
177-423
177-424
177-425
177-427
177-429
177-430
177-431
177-432
177-433
177-434
Accuracy
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
Size
.16"
.24"
.275"
.35"
.425"
.5"
.65"
.8"
1"
1.2"
1.4"
1.6"
1.8"
Order No.
177-518
177-520
177-522
177-523
177-524
177-525
177-527
177-529
177-530
177-531
177-532
177-533
177-534
Accuracy
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
Bore Gage Zero Checker
SERIES 515
The Bore Gage Zero Checker allows easy
zero adjustment of dial bore gages with
ranges of 18mm (.7") through 400mm (16")
using gauge blocks.
SPECIFICATIONS
Order No.
515-590
Applicable range
18 -400mm (.7" - 16")
515-590
123
RM-120 Ring Master
Ring Gage Measuring Machine
FEATURES
• The laser holoscale incorporated in
the RM-120 eliminates the need for a
reference gauge block set and reference
ring gages.
• Probe change is not required for the entire
measuring range.
• Enhanced repeatability and lower
measuring force achieved with the air
bearing on the probe carriage guide.
• Workpiece alignment is easy to perform
with the specially designed measuring
table which is capable of moving, tilting,
elevating, and 90 degree rotating.
• The model with an analog meter will
further facilitate workpiece positioning.
565-201
SPECIFICATIONS
Model No.
Range
Resolution
Accuracy (20°C)
RM-120
ID: 6mm - 120mm
0.0001mm (0.1µm)
±(0.03+5D/1000)µm
D = Measuring internal diameter (mm)
Repeatability (±2σ) ±0.2µm
Measuring unit
Laser Holoscale
Measuring force
Approx. 0.2N
Workpiece size
OD: 20mm to 200mm
Thickness: Up to 40mm
Ambient
20°C ±0.5°C
temperature
Air requirement
400KPa
Air consumption
Approx. 30 liters per minute
Dimensions (W x D 720 x 500 x 880mm
x H)
124